IB/ehca: Add "port connection autodetect mode"

This patch enhances ehca with a capability to "autodetect" the ports
being connected physically. In order to utilize that function the
module option nr_ports must be set to -1 (default is 2 - two
ports). This feature is experimental and will made the default later.

More detail:

If the user connects only one port to the switch, current code requires
  1) port one to be connected and
  2) module option nr_ports=1 to be given.

If autodetect is enabled, ehca will not wait at creation of the GSI QP
for the respective port to become active. Since firmware does not
accept modify_qp() while the port is down at initialization, we need
to cache all calls to modify_qp() for the SMI/GSI QP and just return a
good return code.

When a port is activated and we get a PORT_ACTIVE event, we replay the
cached modify-qp() parms and re-trigger any posted recv WRs. Only then
do we forward the PORT_ACTIVE event to registered clients.

The result of this autodetect patch is that all ports will be
accessible by the users. Depending on their respective cabling only
those ports that are connected properly will become operable. If a
user tries to modify a regular QP of a non-connected port, modify_qp()
will fail. Furthermore, ibv_devinfo should show the port state
accordingly.

Note that this patch primarily improves the loading behaviour of
ehca. If the cable is removed while the driver is operating and
plugged in again, firmware will handle that properly by sending an
appropriate async event.

Signed-off-by: Hoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 5 insertions, 2 deletions

diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index 0a34083dac8..84c9b7b8669 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -90,7 +90,8 @@ MODULE_PARM_DESC(hw_level,
 		 "hardware level"
 		 " (0: autosensing (default), 1: v. 0.20, 2: v. 0.21)");
 MODULE_PARM_DESC(nr_ports,
-		 "number of connected ports (default: 2)");
+		 "number of connected ports (-1: autodetect, 1: port one only, "
+		 "2: two ports (default)");
 MODULE_PARM_DESC(use_hp_mr,
 		 "high performance MRs (0: no (default), 1: yes)");
 MODULE_PARM_DESC(port_act_time,
@@ -693,7 +694,7 @@ static int __devinit ehca_probe(struct of_device *dev,
 	struct ehca_shca *shca;
 	const u64 *handle;
 	struct ib_pd *ibpd;
-	int ret;
+	int ret, i;
 
 	handle = of_get_property(dev->node, "ibm,hca-handle", NULL);
 	if (!handle) {
@@ -714,6 +715,8 @@ static int __devinit ehca_probe(struct of_device *dev,
 		return -ENOMEM;
 	}
 	mutex_init(&shca->modify_mutex);
+	for (i = 0; i < ARRAY_SIZE(shca->sport); i++)
+		spin_lock_init(&shca->sport[i].mod_sqp_lock);
 
 	shca->ofdev = dev;
 	shca->ipz_hca_handle.handle = *handle;