IB/ipath: core driver header files

ipath_common.h and ips_common.h contain definitions shared between
userspace and the kernel.

ipath_kernel.h is the core driver header file.

ipath_debug.h contains mask values used for controlling driver debugging.

ipath_registers.h contains bitmask definitions used in chip registers.

Signed-off-by: Bryan O'Sullivan <bos@pathscale.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

1 files changed, 616 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
new file mode 100644
index 00000000000..48a55247b83
--- /dev/null
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -0,0 +1,616 @@
+/*
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _IPATH_COMMON_H
+#define _IPATH_COMMON_H
+
+/*
+ * This file contains defines, structures, etc. that are used
+ * to communicate between kernel and user code.
+ */
+
+/* This is the IEEE-assigned OUI for PathScale, Inc. */
+#define IPATH_SRC_OUI_1 0x00
+#define IPATH_SRC_OUI_2 0x11
+#define IPATH_SRC_OUI_3 0x75
+
+/* version of protocol header (known to chip also). In the long run,
+ * we should be able to generate and accept a range of version numbers;
+ * for now we only accept one, and it's compiled in.
+ */
+#define IPS_PROTO_VERSION 2
+
+/*
+ * These are compile time constants that you may want to enable or disable
+ * if you are trying to debug problems with code or performance.
+ * IPATH_VERBOSE_TRACING define as 1 if you want additional tracing in
+ * fastpath code
+ * IPATH_TRACE_REGWRITES define as 1 if you want register writes to be
+ * traced in faspath code
+ * _IPATH_TRACING define as 0 if you want to remove all tracing in a
+ * compilation unit
+ * _IPATH_DEBUGGING define as 0 if you want to remove debug prints
+ */
+
+/*
+ * The value in the BTH QP field that InfiniPath uses to differentiate
+ * an infinipath protocol IB packet vs standard IB transport
+ */
+#define IPATH_KD_QP 0x656b79
+
+/*
+ * valid states passed to ipath_set_linkstate() user call
+ */
+#define IPATH_IB_LINKDOWN		0
+#define IPATH_IB_LINKARM		1
+#define IPATH_IB_LINKACTIVE		2
+#define IPATH_IB_LINKINIT		3
+#define IPATH_IB_LINKDOWN_SLEEP		4
+#define IPATH_IB_LINKDOWN_DISABLE	5
+
+/*
+ * stats maintained by the driver.  For now, at least, this is global
+ * to all minor devices.
+ */
+struct infinipath_stats {
+	/* number of interrupts taken */
+	__u64 sps_ints;
+	/* number of interrupts for errors */
+	__u64 sps_errints;
+	/* number of errors from chip (not incl. packet errors or CRC) */
+	__u64 sps_errs;
+	/* number of packet errors from chip other than CRC */
+	__u64 sps_pkterrs;
+	/* number of packets with CRC errors (ICRC and VCRC) */
+	__u64 sps_crcerrs;
+	/* number of hardware errors reported (parity, etc.) */
+	__u64 sps_hwerrs;
+	/* number of times IB link changed state unexpectedly */
+	__u64 sps_iblink;
+	/* no longer used; left for compatibility */
+	__u64 sps_unused3;
+	/* number of kernel (port0) packets received */
+	__u64 sps_port0pkts;
+	/* number of "ethernet" packets sent by driver */
+	__u64 sps_ether_spkts;
+	/* number of "ethernet" packets received by driver */
+	__u64 sps_ether_rpkts;
+	/* number of SMA packets sent by driver */
+	__u64 sps_sma_spkts;
+	/* number of SMA packets received by driver */
+	__u64 sps_sma_rpkts;
+	/* number of times all ports rcvhdrq was full and packet dropped */
+	__u64 sps_hdrqfull;
+	/* number of times all ports egrtid was full and packet dropped */
+	__u64 sps_etidfull;
+	/*
+	 * number of times we tried to send from driver, but no pio buffers
+	 * avail
+	 */
+	__u64 sps_nopiobufs;
+	/* number of ports currently open */
+	__u64 sps_ports;
+	/* list of pkeys (other than default) accepted (0 means not set) */
+	__u16 sps_pkeys[4];
+	/* lids for up to 4 infinipaths, indexed by infinipath # */
+	__u16 sps_lid[4];
+	/* number of user ports per chip (not IB ports) */
+	__u32 sps_nports;
+	/* not our interrupt, or already handled */
+	__u32 sps_nullintr;
+	/* max number of packets handled per receive call */
+	__u32 sps_maxpkts_call;
+	/* avg number of packets handled per receive call */
+	__u32 sps_avgpkts_call;
+	/* total number of pages locked */
+	__u64 sps_pagelocks;
+	/* total number of pages unlocked */
+	__u64 sps_pageunlocks;
+	/*
+	 * Number of packets dropped in kernel other than errors (ether
+	 * packets if ipath not configured, sma/mad, etc.)
+	 */
+	__u64 sps_krdrops;
+	/* mlids for up to 4 infinipaths, indexed by infinipath # */
+	__u16 sps_mlid[4];
+	/* pad for future growth */
+	__u64 __sps_pad[45];
+};
+
+/*
+ * These are the status bits readable (in ascii form, 64bit value)
+ * from the "status" sysfs file.
+ */
+#define IPATH_STATUS_INITTED       0x1	/* basic initialization done */
+#define IPATH_STATUS_DISABLED      0x2	/* hardware disabled */
+/* Device has been disabled via admin request */
+#define IPATH_STATUS_ADMIN_DISABLED    0x4
+#define IPATH_STATUS_OIB_SMA       0x8	/* ipath_mad kernel SMA running */
+#define IPATH_STATUS_SMA          0x10	/* user SMA running */
+/* Chip has been found and initted */
+#define IPATH_STATUS_CHIP_PRESENT 0x20
+/* IB link is at ACTIVE, usable for data traffic */
+#define IPATH_STATUS_IB_READY     0x40
+/* link is configured, LID, MTU, etc. have been set */
+#define IPATH_STATUS_IB_CONF      0x80
+/* no link established, probably no cable */
+#define IPATH_STATUS_IB_NOCABLE  0x100
+/* A Fatal hardware error has occurred. */
+#define IPATH_STATUS_HWERROR     0x200
+
+/*
+ * The list of usermode accessible registers.  Also see Reg_* later in file.
+ */
+typedef enum _ipath_ureg {
+	/* (RO)  DMA RcvHdr to be used next. */
+	ur_rcvhdrtail = 0,
+	/* (RW)  RcvHdr entry to be processed next by host. */
+	ur_rcvhdrhead = 1,
+	/* (RO)  Index of next Eager index to use. */
+	ur_rcvegrindextail = 2,
+	/* (RW)  Eager TID to be processed next */
+	ur_rcvegrindexhead = 3,
+	/* For internal use only; max register number. */
+	_IPATH_UregMax
+} ipath_ureg;
+
+/* bit values for spi_runtime_flags */
+#define IPATH_RUNTIME_HT	0x1
+#define IPATH_RUNTIME_PCIE	0x2
+#define IPATH_RUNTIME_FORCE_WC_ORDER	0x4
+#define IPATH_RUNTIME_RCVHDR_COPY	0x8
+
+/*
+ * This structure is returned by ipath_userinit() immediately after
+ * open to get implementation-specific info, and info specific to this
+ * instance.
+ *
+ * This struct must have explict pad fields where type sizes
+ * may result in different alignments between 32 and 64 bit
+ * programs, since the 64 bit * bit kernel requires the user code
+ * to have matching offsets
+ */
+struct ipath_base_info {
+	/* version of hardware, for feature checking. */
+	__u32 spi_hw_version;
+	/* version of software, for feature checking. */
+	__u32 spi_sw_version;
+	/* InfiniPath port assigned, goes into sent packets */
+	__u32 spi_port;
+	/*
+	 * IB MTU, packets IB data must be less than this.
+	 * The MTU is in bytes, and will be a multiple of 4 bytes.
+	 */
+	__u32 spi_mtu;
+	/*
+	 * Size of a PIO buffer.  Any given packet's total size must be less
+	 * than this (in words).  Included is the starting control word, so
+	 * if 513 is returned, then total pkt size is 512 words or less.
+	 */
+	__u32 spi_piosize;
+	/* size of the TID cache in infinipath, in entries */
+	__u32 spi_tidcnt;
+	/* size of the TID Eager list in infinipath, in entries */
+	__u32 spi_tidegrcnt;
+	/* size of a single receive header queue entry. */
+	__u32 spi_rcvhdrent_size;
+	/*
+	 * Count of receive header queue entries allocated.
+	 * This may be less than the spu_rcvhdrcnt passed in!.
+	 */
+	__u32 spi_rcvhdr_cnt;
+
+	/* per-chip and other runtime features bitmap (IPATH_RUNTIME_*) */
+	__u32 spi_runtime_flags;
+
+	/* address where receive buffer queue is mapped into */
+	__u64 spi_rcvhdr_base;
+
+	/* user program. */
+
+	/* base address of eager TID receive buffers. */
+	__u64 spi_rcv_egrbufs;
+
+	/* Allocated by initialization code, not by protocol. */
+
+	/*
+	 * Size of each TID buffer in host memory, starting at
+	 * spi_rcv_egrbufs.  The buffers are virtually contiguous.
+	 */
+	__u32 spi_rcv_egrbufsize;
+	/*
+	 * The special QP (queue pair) value that identifies an infinipath
+	 * protocol packet from standard IB packets.  More, probably much
+	 * more, to be added.
+	 */
+	__u32 spi_qpair;
+
+	/*
+	 * User register base for init code, not to be used directly by
+	 * protocol or applications.
+	 */
+	__u64 __spi_uregbase;
+	/*
+	 * Maximum buffer size in bytes that can be used in a single TID
+	 * entry (assuming the buffer is aligned to this boundary).  This is
+	 * the minimum of what the hardware and software support Guaranteed
+	 * to be a power of 2.
+	 */
+	__u32 spi_tid_maxsize;
+	/*
+	 * alignment of each pio send buffer (byte count
+	 * to add to spi_piobufbase to get to second buffer)
+	 */
+	__u32 spi_pioalign;
+	/*
+	 * The index of the first pio buffer available to this process;
+	 * needed to do lookup in spi_pioavailaddr; not added to
+	 * spi_piobufbase.
+	 */
+	__u32 spi_pioindex;
+	 /* number of buffers mapped for this process */
+	__u32 spi_piocnt;
+
+	/*
+	 * Base address of writeonly pio buffers for this process.
+	 * Each buffer has spi_piosize words, and is aligned on spi_pioalign
+	 * boundaries.  spi_piocnt buffers are mapped from this address
+	 */
+	__u64 spi_piobufbase;
+
+	/*
+	 * Base address of readonly memory copy of the pioavail registers.
+	 * There are 2 bits for each buffer.
+	 */
+	__u64 spi_pioavailaddr;
+
+	/*
+	 * Address where driver updates a copy of the interface and driver
+	 * status (IPATH_STATUS_*) as a 64 bit value.  It's followed by a
+	 * string indicating hardware error, if there was one.
+	 */
+	__u64 spi_status;
+
+	/* number of chip ports available to user processes */
+	__u32 spi_nports;
+	/* unit number of chip we are using */
+	__u32 spi_unit;
+	/* num bufs in each contiguous set */
+	__u32 spi_rcv_egrperchunk;
+	/* size in bytes of each contiguous set */
+	__u32 spi_rcv_egrchunksize;
+	/* total size of mmap to cover full rcvegrbuffers */
+	__u32 spi_rcv_egrbuftotlen;
+} __attribute__ ((aligned(8)));
+
+
+/*
+ * This version number is given to the driver by the user code during
+ * initialization in the spu_userversion field of ipath_user_info, so
+ * the driver can check for compatibility with user code.
+ *
+ * The major version changes when data structures
+ * change in an incompatible way.  The driver must be the same or higher
+ * for initialization to succeed.  In some cases, a higher version
+ * driver will not interoperate with older software, and initialization
+ * will return an error.
+ */
+#define IPATH_USER_SWMAJOR 1
+
+/*
+ * Minor version differences are always compatible
+ * a within a major version, however if if user software is larger
+ * than driver software, some new features and/or structure fields
+ * may not be implemented; the user code must deal with this if it
+ * cares, or it must abort after initialization reports the difference
+ */
+#define IPATH_USER_SWMINOR 2
+
+#define IPATH_USER_SWVERSION ((IPATH_USER_SWMAJOR<<16) | IPATH_USER_SWMINOR)
+
+#define IPATH_KERN_TYPE 0
+
+/*
+ * Similarly, this is the kernel version going back to the user.  It's
+ * slightly different, in that we want to tell if the driver was built as
+ * part of a PathScale release, or from the driver from OpenIB, kernel.org,
+ * or a standard distribution, for support reasons.  The high bit is 0 for
+ * non-PathScale, and 1 for PathScale-built/supplied.
+ *
+ * It's returned by the driver to the user code during initialization in the
+ * spi_sw_version field of ipath_base_info, so the user code can in turn
+ * check for compatibility with the kernel.
+*/
+#define IPATH_KERN_SWVERSION ((IPATH_KERN_TYPE<<31) | IPATH_USER_SWVERSION)
+
+/*
+ * This structure is passed to ipath_userinit() to tell the driver where
+ * user code buffers are, sizes, etc.   The offsets and sizes of the
+ * fields must remain unchanged, for binary compatibility.  It can
+ * be extended, if userversion is changed so user code can tell, if needed
+ */
+struct ipath_user_info {
+	/*
+	 * version of user software, to detect compatibility issues.
+	 * Should be set to IPATH_USER_SWVERSION.
+	 */
+	__u32 spu_userversion;
+
+	/* desired number of receive header queue entries */
+	__u32 spu_rcvhdrcnt;
+
+	/* size of struct base_info to write to */
+	__u32 spu_base_info_size;
+
+	/*
+	 * number of words in KD protocol header
+	 * This tells InfiniPath how many words to copy to rcvhdrq.  If 0,
+	 * kernel uses a default.  Once set, attempts to set any other value
+	 * are an error (EAGAIN) until driver is reloaded.
+	 */
+	__u32 spu_rcvhdrsize;
+
+	/*
+	 * cache line aligned (64 byte) user address to
+	 * which the rcvhdrtail register will be written by infinipath
+	 * whenever it changes, so that no chip registers are read in
+	 * the performance path.
+	 */
+	__u64 spu_rcvhdraddr;
+
+	/*
+	 * address of struct base_info to write to
+	 */
+	__u64 spu_base_info;
+
+} __attribute__ ((aligned(8)));
+
+/* User commands. */
+
+#define IPATH_CMD_MIN		16
+
+#define IPATH_CMD_USER_INIT	16	/* set up userspace */
+#define IPATH_CMD_PORT_INFO	17	/* find out what resources we got */
+#define IPATH_CMD_RECV_CTRL	18	/* control receipt of packets */
+#define IPATH_CMD_TID_UPDATE	19	/* update expected TID entries */
+#define IPATH_CMD_TID_FREE	20	/* free expected TID entries */
+#define IPATH_CMD_SET_PART_KEY	21	/* add partition key */
+
+#define IPATH_CMD_MAX		21
+
+struct ipath_port_info {
+	__u32 num_active;	/* number of active units */
+	__u32 unit;		/* unit (chip) assigned to caller */
+	__u32 port;		/* port on unit assigned to caller */
+};
+
+struct ipath_tid_info {
+	__u32 tidcnt;
+	/* make structure same size in 32 and 64 bit */
+	__u32 tid__unused;
+	/* virtual address of first page in transfer */
+	__u64 tidvaddr;
+	/* pointer (same size 32/64 bit) to __u16 tid array */
+	__u64 tidlist;
+
+	/*
+	 * pointer (same size 32/64 bit) to bitmap of TIDs used
+	 * for this call; checked for being large enough at open
+	 */
+	__u64 tidmap;
+};
+
+struct ipath_cmd {
+	__u32 type;			/* command type */
+	union {
+		struct ipath_tid_info tid_info;
+		struct ipath_user_info user_info;
+		/* address in userspace of struct ipath_port_info to
+		   write result to */
+		__u64 port_info;
+		/* enable/disable receipt of packets */
+		__u32 recv_ctrl;
+		/* partition key to set */
+		__u16 part_key;
+	} cmd;
+};
+
+struct ipath_iovec {
+	/* Pointer to data, but same size 32 and 64 bit */
+	__u64 iov_base;
+
+	/*
+	 * Length of data; don't need 64 bits, but want
+	 * ipath_sendpkt to remain same size as before 32 bit changes, so...
+	 */
+	__u64 iov_len;
+};
+
+/*
+ * Describes a single packet for send.  Each packet can have one or more
+ * buffers, but the total length (exclusive of IB headers) must be less
+ * than the MTU, and if using the PIO method, entire packet length,
+ * including IB headers, must be less than the ipath_piosize value (words).
+ * Use of this necessitates including sys/uio.h
+ */
+struct __ipath_sendpkt {
+	__u32 sps_flags;	/* flags for packet (TBD) */
+	__u32 sps_cnt;		/* number of entries to use in sps_iov */
+	/* array of iov's describing packet. TEMPORARY */
+	struct ipath_iovec sps_iov[4];
+};
+
+/* Passed into SMA special file's ->read and ->write methods. */
+struct ipath_sma_pkt
+{
+	__u32 unit;	/* unit on which to send packet */
+	__u64 data;	/* address of payload in userspace */
+	__u32 len;	/* length of payload */
+};
+
+/*
+ * Data layout in I2C flash (for GUID, etc.)
+ * All fields are little-endian binary unless otherwise stated
+ */
+#define IPATH_FLASH_VERSION 1
+struct ipath_flash {
+	/* flash layout version (IPATH_FLASH_VERSION) */
+	__u8 if_fversion;
+	/* checksum protecting if_length bytes */
+	__u8 if_csum;
+	/*
+	 * valid length (in use, protected by if_csum), including
+	 * if_fversion and if_sum themselves)
+	 */
+	__u8 if_length;
+	/* the GUID, in network order */
+	__u8 if_guid[8];
+	/* number of GUIDs to use, starting from if_guid */
+	__u8 if_numguid;
+	/* the board serial number, in ASCII */
+	char if_serial[12];
+	/* board mfg date (YYYYMMDD ASCII) */
+	char if_mfgdate[8];
+	/* last board rework/test date (YYYYMMDD ASCII) */
+	char if_testdate[8];
+	/* logging of error counts, TBD */
+	__u8 if_errcntp[4];
+	/* powered on hours, updated at driver unload */
+	__u8 if_powerhour[2];
+	/* ASCII free-form comment field */
+	char if_comment[32];
+	/* 78 bytes used, min flash size is 128 bytes */
+	__u8 if_future[50];
+};
+
+/*
+ * These are the counters implemented in the chip, and are listed in order.
+ * The InterCaps naming is taken straight from the chip spec.
+ */
+struct infinipath_counters {
+	__u64 LBIntCnt;
+	__u64 LBFlowStallCnt;
+	__u64 Reserved1;
+	__u64 TxUnsupVLErrCnt;
+	__u64 TxDataPktCnt;
+	__u64 TxFlowPktCnt;
+	__u64 TxDwordCnt;
+	__u64 TxLenErrCnt;
+	__u64 TxMaxMinLenErrCnt;
+	__u64 TxUnderrunCnt;
+	__u64 TxFlowStallCnt;
+	__u64 TxDroppedPktCnt;
+	__u64 RxDroppedPktCnt;
+	__u64 RxDataPktCnt;
+	__u64 RxFlowPktCnt;
+	__u64 RxDwordCnt;
+	__u64 RxLenErrCnt;
+	__u64 RxMaxMinLenErrCnt;
+	__u64 RxICRCErrCnt;
+	__u64 RxVCRCErrCnt;
+	__u64 RxFlowCtrlErrCnt;
+	__u64 RxBadFormatCnt;
+	__u64 RxLinkProblemCnt;
+	__u64 RxEBPCnt;
+	__u64 RxLPCRCErrCnt;
+	__u64 RxBufOvflCnt;
+	__u64 RxTIDFullErrCnt;
+	__u64 RxTIDValidErrCnt;
+	__u64 RxPKeyMismatchCnt;
+	__u64 RxP0HdrEgrOvflCnt;
+	__u64 RxP1HdrEgrOvflCnt;
+	__u64 RxP2HdrEgrOvflCnt;
+	__u64 RxP3HdrEgrOvflCnt;
+	__u64 RxP4HdrEgrOvflCnt;
+	__u64 RxP5HdrEgrOvflCnt;
+	__u64 RxP6HdrEgrOvflCnt;
+	__u64 RxP7HdrEgrOvflCnt;
+	__u64 RxP8HdrEgrOvflCnt;
+	__u64 Reserved6;
+	__u64 Reserved7;
+	__u64 IBStatusChangeCnt;
+	__u64 IBLinkErrRecoveryCnt;
+	__u64 IBLinkDownedCnt;
+	__u64 IBSymbolErrCnt;
+};
+
+/*
+ * The next set of defines are for packet headers, and chip register
+ * and memory bits that are visible to and/or used by user-mode software
+ * The other bits that are used only by the driver or diags are in
+ * ipath_registers.h
+ */
+
+/* RcvHdrFlags bits */
+#define INFINIPATH_RHF_LENGTH_MASK 0x7FF
+#define INFINIPATH_RHF_LENGTH_SHIFT 0
+#define INFINIPATH_RHF_RCVTYPE_MASK 0x7
+#define INFINIPATH_RHF_RCVTYPE_SHIFT 11
+#define INFINIPATH_RHF_EGRINDEX_MASK 0x7FF
+#define INFINIPATH_RHF_EGRINDEX_SHIFT 16
+#define INFINIPATH_RHF_H_ICRCERR   0x80000000
+#define INFINIPATH_RHF_H_VCRCERR   0x40000000
+#define INFINIPATH_RHF_H_PARITYERR 0x20000000
+#define INFINIPATH_RHF_H_LENERR    0x10000000
+#define INFINIPATH_RHF_H_MTUERR    0x08000000
+#define INFINIPATH_RHF_H_IHDRERR   0x04000000
+#define INFINIPATH_RHF_H_TIDERR    0x02000000
+#define INFINIPATH_RHF_H_MKERR     0x01000000
+#define INFINIPATH_RHF_H_IBERR     0x00800000
+#define INFINIPATH_RHF_L_SWA       0x00008000
+#define INFINIPATH_RHF_L_SWB       0x00004000
+
+/* infinipath header fields */
+#define INFINIPATH_I_VERS_MASK 0xF
+#define INFINIPATH_I_VERS_SHIFT 28
+#define INFINIPATH_I_PORT_MASK 0xF
+#define INFINIPATH_I_PORT_SHIFT 24
+#define INFINIPATH_I_TID_MASK 0x7FF
+#define INFINIPATH_I_TID_SHIFT 13
+#define INFINIPATH_I_OFFSET_MASK 0x1FFF
+#define INFINIPATH_I_OFFSET_SHIFT 0
+
+/* K_PktFlags bits */
+#define INFINIPATH_KPF_INTR 0x1
+
+/* SendPIO per-buffer control */
+#define INFINIPATH_SP_LENGTHP1_MASK 0x3FF
+#define INFINIPATH_SP_LENGTHP1_SHIFT 0
+#define INFINIPATH_SP_INTR    0x80000000
+#define INFINIPATH_SP_TEST    0x40000000
+#define INFINIPATH_SP_TESTEBP 0x20000000
+
+/* SendPIOAvail bits */
+#define INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT 1
+#define INFINIPATH_SENDPIOAVAIL_CHECK_SHIFT 0
+
+#endif				/* _IPATH_COMMON_H */