IB/ipath: Remove incompletely implemented ipath_runtime flags and code

The IPATH_RUNTIME_PBC_REWRITE and the IPATH_RUNTIME_LOOSE_DMA_ALIGN
flags were not ever implemented correctly and did not turn out to be
necessary.  Remove the last vestiges of these flags but mark the spot
with a comment to remind us to not reuse these flags in the interest
of binary compatibility.  The INFINIPATH_XGXS_SUPPRESS_ARMLAUNCH_ERR
bit was also not found to be useful, so it was dropped in the cleanup
as well.

Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Arthur Jones <arthur.jones@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

2 files changed, 1 insertions, 27 deletions

diff --git a/drivers/infiniband/hw/ipath/ipath_common.h b/drivers/infiniband/hw/ipath/ipath_common.h
index 10c008f22ba..12e1349cd03 100644
--- a/drivers/infiniband/hw/ipath/ipath_common.h
+++ b/drivers/infiniband/hw/ipath/ipath_common.h
@@ -189,8 +189,7 @@ typedef enum _ipath_ureg {
 #define IPATH_RUNTIME_FORCE_WC_ORDER	0x4
 #define IPATH_RUNTIME_RCVHDR_COPY	0x8
 #define IPATH_RUNTIME_MASTER	0x10
-#define IPATH_RUNTIME_PBC_REWRITE 0x20
-#define IPATH_RUNTIME_LOOSE_DMA_ALIGN 0x40
+/* 0x20 and 0x40 are no longer used, but are reserved for ABI compatibility */
 
 /*
  * This structure is returned by ipath_userinit() immediately after
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index 2345bb011ac..71159074011 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -296,13 +296,6 @@ static const struct ipath_cregs ipath_pe_cregs = {
 #define IPATH_GPIO_SCL (1ULL << \
 	(_IPATH_GPIO_SCL_NUM+INFINIPATH_EXTC_GPIOOE_SHIFT))
 
-/*
- * Rev2 silicon allows suppressing check for ArmLaunch errors.
- * this can speed up short packet sends on systems that do
- * not guaranteee write-order.
- */
-#define INFINIPATH_XGXS_SUPPRESS_ARMLAUNCH_ERR (1ULL<<63)
-
 /* 6120 specific hardware errors... */
 static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = {
 	INFINIPATH_HWE_MSG(PCIEPOISONEDTLP, "PCIe Poisoned TLP"),
@@ -680,17 +673,6 @@ static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
 		val |= dd->ipath_rx_pol_inv <<
 			INFINIPATH_XGXS_RX_POL_SHIFT;
 	}
-	if (dd->ipath_minrev >= 2) {
-		/* Rev 2. can tolerate multiple writes to PBC, and
-		 * allowing them can provide lower latency on some
-		 * CPUs, but this feature is off by default, only
-		 * turned on by setting D63 of XGXSconfig reg.
-		 * May want to make this conditional more
-		 * fine-grained in future. This is not exactly
-		 * related to XGXS, but where the bit ended up.
-		 */
-		val |= INFINIPATH_XGXS_SUPPRESS_ARMLAUNCH_ERR;
-	}
 	if (val != prev_val)
 		ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
 
@@ -1324,13 +1306,6 @@ static int ipath_pe_get_base_info(struct ipath_portdata *pd, void *kbase)
 
 	dd = pd->port_dd;
 
-	if (dd != NULL && dd->ipath_minrev >= 2) {
-		ipath_cdbg(PROC, "IBA6120 Rev2, allow multiple PBC write\n");
-		kinfo->spi_runtime_flags |= IPATH_RUNTIME_PBC_REWRITE;
-		ipath_cdbg(PROC, "IBA6120 Rev2, allow loose DMA alignment\n");
-		kinfo->spi_runtime_flags |= IPATH_RUNTIME_LOOSE_DMA_ALIGN;
-	}
-
 done:
 	kinfo->spi_runtime_flags |= IPATH_RUNTIME_PCIE;
 	return 0;