Merge branch 'master' into for-linus

Conflicts:
	fs/pipe.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

1 files changed, 451 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/qib/qib_eeprom.c b/drivers/infiniband/hw/qib/qib_eeprom.c
new file mode 100644
index 00000000000..92d9cfe98a6
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_eeprom.c
@@ -0,0 +1,451 @@
+/*
+ * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+
+#include "qib.h"
+
+/*
+ * Functions specific to the serial EEPROM on cards handled by ib_qib.
+ * The actual serail interface code is in qib_twsi.c. This file is a client
+ */
+
+/**
+ * qib_eeprom_read - receives bytes from the eeprom via I2C
+ * @dd: the qlogic_ib device
+ * @eeprom_offset: address to read from
+ * @buffer: where to store result
+ * @len: number of bytes to receive
+ */
+int qib_eeprom_read(struct qib_devdata *dd, u8 eeprom_offset,
+		    void *buff, int len)
+{
+	int ret;
+
+	ret = mutex_lock_interruptible(&dd->eep_lock);
+	if (!ret) {
+		ret = qib_twsi_reset(dd);
+		if (ret)
+			qib_dev_err(dd, "EEPROM Reset for read failed\n");
+		else
+			ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev,
+					      eeprom_offset, buff, len);
+		mutex_unlock(&dd->eep_lock);
+	}
+
+	return ret;
+}
+
+/*
+ * Actually update the eeprom, first doing write enable if
+ * needed, then restoring write enable state.
+ * Must be called with eep_lock held
+ */
+static int eeprom_write_with_enable(struct qib_devdata *dd, u8 offset,
+		     const void *buf, int len)
+{
+	int ret, pwen;
+
+	pwen = dd->f_eeprom_wen(dd, 1);
+	ret = qib_twsi_reset(dd);
+	if (ret)
+		qib_dev_err(dd, "EEPROM Reset for write failed\n");
+	else
+		ret = qib_twsi_blk_wr(dd, dd->twsi_eeprom_dev,
+				      offset, buf, len);
+	dd->f_eeprom_wen(dd, pwen);
+	return ret;
+}
+
+/**
+ * qib_eeprom_write - writes data to the eeprom via I2C
+ * @dd: the qlogic_ib device
+ * @eeprom_offset: where to place data
+ * @buffer: data to write
+ * @len: number of bytes to write
+ */
+int qib_eeprom_write(struct qib_devdata *dd, u8 eeprom_offset,
+		     const void *buff, int len)
+{
+	int ret;
+
+	ret = mutex_lock_interruptible(&dd->eep_lock);
+	if (!ret) {
+		ret = eeprom_write_with_enable(dd, eeprom_offset, buff, len);
+		mutex_unlock(&dd->eep_lock);
+	}
+
+	return ret;
+}
+
+static u8 flash_csum(struct qib_flash *ifp, int adjust)
+{
+	u8 *ip = (u8 *) ifp;
+	u8 csum = 0, len;
+
+	/*
+	 * Limit length checksummed to max length of actual data.
+	 * Checksum of erased eeprom will still be bad, but we avoid
+	 * reading past the end of the buffer we were passed.
+	 */
+	len = ifp->if_length;
+	if (len > sizeof(struct qib_flash))
+		len = sizeof(struct qib_flash);
+	while (len--)
+		csum += *ip++;
+	csum -= ifp->if_csum;
+	csum = ~csum;
+	if (adjust)
+		ifp->if_csum = csum;
+
+	return csum;
+}
+
+/**
+ * qib_get_eeprom_info- get the GUID et al. from the TSWI EEPROM device
+ * @dd: the qlogic_ib device
+ *
+ * We have the capability to use the nguid field, and get
+ * the guid from the first chip's flash, to use for all of them.
+ */
+void qib_get_eeprom_info(struct qib_devdata *dd)
+{
+	void *buf;
+	struct qib_flash *ifp;
+	__be64 guid;
+	int len, eep_stat;
+	u8 csum, *bguid;
+	int t = dd->unit;
+	struct qib_devdata *dd0 = qib_lookup(0);
+
+	if (t && dd0->nguid > 1 && t <= dd0->nguid) {
+		u8 oguid;
+		dd->base_guid = dd0->base_guid;
+		bguid = (u8 *) &dd->base_guid;
+
+		oguid = bguid[7];
+		bguid[7] += t;
+		if (oguid > bguid[7]) {
+			if (bguid[6] == 0xff) {
+				if (bguid[5] == 0xff) {
+					qib_dev_err(dd, "Can't set %s GUID"
+						    " from base, wraps to"
+						    " OUI!\n",
+						    qib_get_unit_name(t));
+					dd->base_guid = 0;
+					goto bail;
+				}
+				bguid[5]++;
+			}
+			bguid[6]++;
+		}
+		dd->nguid = 1;
+		goto bail;
+	}
+
+	/*
+	 * Read full flash, not just currently used part, since it may have
+	 * been written with a newer definition.
+	 * */
+	len = sizeof(struct qib_flash);
+	buf = vmalloc(len);
+	if (!buf) {
+		qib_dev_err(dd, "Couldn't allocate memory to read %u "
+			    "bytes from eeprom for GUID\n", len);
+		goto bail;
+	}
+
+	/*
+	 * Use "public" eeprom read function, which does locking and
+	 * figures out device. This will migrate to chip-specific.
+	 */
+	eep_stat = qib_eeprom_read(dd, 0, buf, len);
+
+	if (eep_stat) {
+		qib_dev_err(dd, "Failed reading GUID from eeprom\n");
+		goto done;
+	}
+	ifp = (struct qib_flash *)buf;
+
+	csum = flash_csum(ifp, 0);
+	if (csum != ifp->if_csum) {
+		qib_devinfo(dd->pcidev, "Bad I2C flash checksum: "
+			 "0x%x, not 0x%x\n", csum, ifp->if_csum);
+		goto done;
+	}
+	if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) ||
+	    *(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) {
+		qib_dev_err(dd, "Invalid GUID %llx from flash; ignoring\n",
+			    *(unsigned long long *) ifp->if_guid);
+		/* don't allow GUID if all 0 or all 1's */
+		goto done;
+	}
+
+	/* complain, but allow it */
+	if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
+		qib_devinfo(dd->pcidev, "Warning, GUID %llx is "
+			 "default, probably not correct!\n",
+			 *(unsigned long long *) ifp->if_guid);
+
+	bguid = ifp->if_guid;
+	if (!bguid[0] && !bguid[1] && !bguid[2]) {
+		/*
+		 * Original incorrect GUID format in flash; fix in
+		 * core copy, by shifting up 2 octets; don't need to
+		 * change top octet, since both it and shifted are 0.
+		 */
+		bguid[1] = bguid[3];
+		bguid[2] = bguid[4];
+		bguid[3] = 0;
+		bguid[4] = 0;
+		guid = *(__be64 *) ifp->if_guid;
+	} else
+		guid = *(__be64 *) ifp->if_guid;
+	dd->base_guid = guid;
+	dd->nguid = ifp->if_numguid;
+	/*
+	 * Things are slightly complicated by the desire to transparently
+	 * support both the Pathscale 10-digit serial number and the QLogic
+	 * 13-character version.
+	 */
+	if ((ifp->if_fversion > 1) && ifp->if_sprefix[0] &&
+	    ((u8 *) ifp->if_sprefix)[0] != 0xFF) {
+		char *snp = dd->serial;
+
+		/*
+		 * This board has a Serial-prefix, which is stored
+		 * elsewhere for backward-compatibility.
+		 */
+		memcpy(snp, ifp->if_sprefix, sizeof ifp->if_sprefix);
+		snp[sizeof ifp->if_sprefix] = '\0';
+		len = strlen(snp);
+		snp += len;
+		len = (sizeof dd->serial) - len;
+		if (len > sizeof ifp->if_serial)
+			len = sizeof ifp->if_serial;
+		memcpy(snp, ifp->if_serial, len);
+	} else
+		memcpy(dd->serial, ifp->if_serial,
+		       sizeof ifp->if_serial);
+	if (!strstr(ifp->if_comment, "Tested successfully"))
+		qib_dev_err(dd, "Board SN %s did not pass functional "
+			    "test: %s\n", dd->serial, ifp->if_comment);
+
+	memcpy(&dd->eep_st_errs, &ifp->if_errcntp, QIB_EEP_LOG_CNT);
+	/*
+	 * Power-on (actually "active") hours are kept as little-endian value
+	 * in EEPROM, but as seconds in a (possibly as small as 24-bit)
+	 * atomic_t while running.
+	 */
+	atomic_set(&dd->active_time, 0);
+	dd->eep_hrs = ifp->if_powerhour[0] | (ifp->if_powerhour[1] << 8);
+
+done:
+	vfree(buf);
+
+bail:;
+}
+
+/**
+ * qib_update_eeprom_log - copy active-time and error counters to eeprom
+ * @dd: the qlogic_ib device
+ *
+ * Although the time is kept as seconds in the qib_devdata struct, it is
+ * rounded to hours for re-write, as we have only 16 bits in EEPROM.
+ * First-cut code reads whole (expected) struct qib_flash, modifies,
+ * re-writes. Future direction: read/write only what we need, assuming
+ * that the EEPROM had to have been "good enough" for driver init, and
+ * if not, we aren't making it worse.
+ *
+ */
+int qib_update_eeprom_log(struct qib_devdata *dd)
+{
+	void *buf;
+	struct qib_flash *ifp;
+	int len, hi_water;
+	uint32_t new_time, new_hrs;
+	u8 csum;
+	int ret, idx;
+	unsigned long flags;
+
+	/* first, check if we actually need to do anything. */
+	ret = 0;
+	for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
+		if (dd->eep_st_new_errs[idx]) {
+			ret = 1;
+			break;
+		}
+	}
+	new_time = atomic_read(&dd->active_time);
+
+	if (ret == 0 && new_time < 3600)
+		goto bail;
+
+	/*
+	 * The quick-check above determined that there is something worthy
+	 * of logging, so get current contents and do a more detailed idea.
+	 * read full flash, not just currently used part, since it may have
+	 * been written with a newer definition
+	 */
+	len = sizeof(struct qib_flash);
+	buf = vmalloc(len);
+	ret = 1;
+	if (!buf) {
+		qib_dev_err(dd, "Couldn't allocate memory to read %u "
+			    "bytes from eeprom for logging\n", len);
+		goto bail;
+	}
+
+	/* Grab semaphore and read current EEPROM. If we get an
+	 * error, let go, but if not, keep it until we finish write.
+	 */
+	ret = mutex_lock_interruptible(&dd->eep_lock);
+	if (ret) {
+		qib_dev_err(dd, "Unable to acquire EEPROM for logging\n");
+		goto free_bail;
+	}
+	ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev, 0, buf, len);
+	if (ret) {
+		mutex_unlock(&dd->eep_lock);
+		qib_dev_err(dd, "Unable read EEPROM for logging\n");
+		goto free_bail;
+	}
+	ifp = (struct qib_flash *)buf;
+
+	csum = flash_csum(ifp, 0);
+	if (csum != ifp->if_csum) {
+		mutex_unlock(&dd->eep_lock);
+		qib_dev_err(dd, "EEPROM cks err (0x%02X, S/B 0x%02X)\n",
+			    csum, ifp->if_csum);
+		ret = 1;
+		goto free_bail;
+	}
+	hi_water = 0;
+	spin_lock_irqsave(&dd->eep_st_lock, flags);
+	for (idx = 0; idx < QIB_EEP_LOG_CNT; ++idx) {
+		int new_val = dd->eep_st_new_errs[idx];
+		if (new_val) {
+			/*
+			 * If we have seen any errors, add to EEPROM values
+			 * We need to saturate at 0xFF (255) and we also
+			 * would need to adjust the checksum if we were
+			 * trying to minimize EEPROM traffic
+			 * Note that we add to actual current count in EEPROM,
+			 * in case it was altered while we were running.
+			 */
+			new_val += ifp->if_errcntp[idx];
+			if (new_val > 0xFF)
+				new_val = 0xFF;
+			if (ifp->if_errcntp[idx] != new_val) {
+				ifp->if_errcntp[idx] = new_val;
+				hi_water = offsetof(struct qib_flash,
+						    if_errcntp) + idx;
+			}
+			/*
+			 * update our shadow (used to minimize EEPROM
+			 * traffic), to match what we are about to write.
+			 */
+			dd->eep_st_errs[idx] = new_val;
+			dd->eep_st_new_errs[idx] = 0;
+		}
+	}
+	/*
+	 * Now update active-time. We would like to round to the nearest hour
+	 * but unless atomic_t are sure to be proper signed ints we cannot,
+	 * because we need to account for what we "transfer" to EEPROM and
+	 * if we log an hour at 31 minutes, then we would need to set
+	 * active_time to -29 to accurately count the _next_ hour.
+	 */
+	if (new_time >= 3600) {
+		new_hrs = new_time / 3600;
+		atomic_sub((new_hrs * 3600), &dd->active_time);
+		new_hrs += dd->eep_hrs;
+		if (new_hrs > 0xFFFF)
+			new_hrs = 0xFFFF;
+		dd->eep_hrs = new_hrs;
+		if ((new_hrs & 0xFF) != ifp->if_powerhour[0]) {
+			ifp->if_powerhour[0] = new_hrs & 0xFF;
+			hi_water = offsetof(struct qib_flash, if_powerhour);
+		}
+		if ((new_hrs >> 8) != ifp->if_powerhour[1]) {
+			ifp->if_powerhour[1] = new_hrs >> 8;
+			hi_water = offsetof(struct qib_flash, if_powerhour) + 1;
+		}
+	}
+	/*
+	 * There is a tiny possibility that we could somehow fail to write
+	 * the EEPROM after updating our shadows, but problems from holding
+	 * the spinlock too long are a much bigger issue.
+	 */
+	spin_unlock_irqrestore(&dd->eep_st_lock, flags);
+	if (hi_water) {
+		/* we made some change to the data, uopdate cksum and write */
+		csum = flash_csum(ifp, 1);
+		ret = eeprom_write_with_enable(dd, 0, buf, hi_water + 1);
+	}
+	mutex_unlock(&dd->eep_lock);
+	if (ret)
+		qib_dev_err(dd, "Failed updating EEPROM\n");
+
+free_bail:
+	vfree(buf);
+bail:
+	return ret;
+}
+
+/**
+ * qib_inc_eeprom_err - increment one of the four error counters
+ * that are logged to EEPROM.
+ * @dd: the qlogic_ib device
+ * @eidx: 0..3, the counter to increment
+ * @incr: how much to add
+ *
+ * Each counter is 8-bits, and saturates at 255 (0xFF). They
+ * are copied to the EEPROM (aka flash) whenever qib_update_eeprom_log()
+ * is called, but it can only be called in a context that allows sleep.
+ * This function can be called even at interrupt level.
+ */
+void qib_inc_eeprom_err(struct qib_devdata *dd, u32 eidx, u32 incr)
+{
+	uint new_val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dd->eep_st_lock, flags);
+	new_val = dd->eep_st_new_errs[eidx] + incr;
+	if (new_val > 255)
+		new_val = 255;
+	dd->eep_st_new_errs[eidx] = new_val;
+	spin_unlock_irqrestore(&dd->eep_st_lock, flags);
+}