Merge branch 'devel-stable' into devel

Conflicts:
	arch/arm/Kconfig
	arch/arm/include/asm/system.h
	arch/arm/mm/Kconfig

1 files changed, 0 insertions, 430 deletions

diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
deleted file mode 100644
index 42cb3faf733..00000000000
--- a/drivers/input/keyboard/tosakbd.c
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- *  Keyboard driver for Sharp Tosa models (SL-6000x)
- *
- *  Copyright (c) 2005 Dirk Opfer
- *  Copyright (c) 2007 Dmitry Baryshkov
- *
- *  Based on xtkbd.c/locomkbd.c/corgikbd.c
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-
-#include <mach/gpio.h>
-#include <mach/tosa.h>
-
-#define KB_ROWMASK(r)		(1 << (r))
-#define SCANCODE(r, c)		(((r)<<4) + (c) + 1)
-#define NR_SCANCODES		SCANCODE(TOSA_KEY_SENSE_NUM - 1, TOSA_KEY_STROBE_NUM - 1) + 1
-
-#define SCAN_INTERVAL		(HZ/10)
-
-#define KB_DISCHARGE_DELAY	10
-#define KB_ACTIVATE_DELAY	10
-
-static unsigned short tosakbd_keycode[NR_SCANCODES] = {
-0,
-0, KEY_W, 0, 0, 0, KEY_K, KEY_BACKSPACE, KEY_P,
-0, 0, 0, 0, 0, 0, 0, 0,
-KEY_Q, KEY_E, KEY_T, KEY_Y, 0, KEY_O, KEY_I, KEY_COMMA,
-0, 0, 0, 0, 0, 0, 0, 0,
-KEY_A, KEY_D, KEY_G, KEY_U, 0, KEY_L, KEY_ENTER, KEY_DOT,
-0, 0, 0, 0, 0, 0, 0, 0,
-KEY_Z, KEY_C, KEY_V, KEY_J, TOSA_KEY_ADDRESSBOOK, TOSA_KEY_CANCEL, TOSA_KEY_CENTER, TOSA_KEY_OK,
-KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0, 0,
-KEY_S, KEY_R, KEY_B, KEY_N, TOSA_KEY_CALENDAR, TOSA_KEY_HOMEPAGE, KEY_LEFTCTRL, TOSA_KEY_LIGHT,
-0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,
-KEY_TAB, KEY_SLASH, KEY_H, KEY_M, TOSA_KEY_MENU, 0, KEY_UP, 0,
-0, 0, TOSA_KEY_FN, 0, 0, 0, 0, 0,
-KEY_X, KEY_F, KEY_SPACE, KEY_APOSTROPHE, TOSA_KEY_MAIL, KEY_LEFT, KEY_DOWN, KEY_RIGHT,
-0, 0, 0,
-};
-
-struct tosakbd {
-	unsigned short keycode[ARRAY_SIZE(tosakbd_keycode)];
-	struct input_dev *input;
-	bool suspended;
-	spinlock_t lock; /* protect kbd scanning */
-	struct timer_list timer;
-};
-
-
-/* Helper functions for reading the keyboard matrix
- * Note: We should really be using the generic gpio functions to alter
- *       GPDR but it requires a function call per GPIO bit which is
- *       excessive when we need to access 12 bits at once, multiple times.
- * These functions must be called within local_irq_save()/local_irq_restore()
- * or similar.
- */
-#define GET_ROWS_STATUS(c)	((GPLR2 & TOSA_GPIO_ALL_SENSE_BIT) >> TOSA_GPIO_ALL_SENSE_RSHIFT)
-
-static inline void tosakbd_discharge_all(void)
-{
-	/* STROBE All HiZ */
-	GPCR1  = TOSA_GPIO_HIGH_STROBE_BIT;
-	GPDR1 &= ~TOSA_GPIO_HIGH_STROBE_BIT;
-	GPCR2  = TOSA_GPIO_LOW_STROBE_BIT;
-	GPDR2 &= ~TOSA_GPIO_LOW_STROBE_BIT;
-}
-
-static inline void tosakbd_activate_all(void)
-{
-	/* STROBE ALL -> High */
-	GPSR1  = TOSA_GPIO_HIGH_STROBE_BIT;
-	GPDR1 |= TOSA_GPIO_HIGH_STROBE_BIT;
-	GPSR2  = TOSA_GPIO_LOW_STROBE_BIT;
-	GPDR2 |= TOSA_GPIO_LOW_STROBE_BIT;
-
-	udelay(KB_DISCHARGE_DELAY);
-
-	/* STATE CLEAR */
-	GEDR2 |= TOSA_GPIO_ALL_SENSE_BIT;
-}
-
-static inline void tosakbd_activate_col(int col)
-{
-	if (col <= 5) {
-		/* STROBE col -> High, not col -> HiZ */
-		GPSR1 = TOSA_GPIO_STROBE_BIT(col);
-		GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
-	} else {
-		/* STROBE col -> High, not col -> HiZ */
-		GPSR2 = TOSA_GPIO_STROBE_BIT(col);
-		GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
-	}
-}
-
-static inline void tosakbd_reset_col(int col)
-{
-	if (col <= 5) {
-		/* STROBE col -> Low */
-		GPCR1 = TOSA_GPIO_STROBE_BIT(col);
-		/* STROBE col -> out, not col -> HiZ */
-		GPDR1 = (GPDR1 & ~TOSA_GPIO_HIGH_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
-	} else {
-		/* STROBE col -> Low */
-		GPCR2 = TOSA_GPIO_STROBE_BIT(col);
-		/* STROBE col -> out, not col -> HiZ */
-		GPDR2 = (GPDR2 & ~TOSA_GPIO_LOW_STROBE_BIT) | TOSA_GPIO_STROBE_BIT(col);
-	}
-}
-/*
- * The tosa keyboard only generates interrupts when a key is pressed.
- * So when a key is pressed, we enable a timer.  This timer scans the
- * keyboard, and this is how we detect when the key is released.
- */
-
-/* Scan the hardware keyboard and push any changes up through the input layer */
-static void tosakbd_scankeyboard(struct platform_device *dev)
-{
-	struct tosakbd *tosakbd = platform_get_drvdata(dev);
-	unsigned int row, col, rowd;
-	unsigned long flags;
-	unsigned int num_pressed = 0;
-
-	spin_lock_irqsave(&tosakbd->lock, flags);
-
-	if (tosakbd->suspended)
-		goto out;
-
-	for (col = 0; col < TOSA_KEY_STROBE_NUM; col++) {
-		/*
-		 * Discharge the output driver capacitatance
-		 * in the keyboard matrix. (Yes it is significant..)
-		 */
-		tosakbd_discharge_all();
-		udelay(KB_DISCHARGE_DELAY);
-
-		tosakbd_activate_col(col);
-		udelay(KB_ACTIVATE_DELAY);
-
-		rowd = GET_ROWS_STATUS(col);
-
-		for (row = 0; row < TOSA_KEY_SENSE_NUM; row++) {
-			unsigned int scancode, pressed;
-			scancode = SCANCODE(row, col);
-			pressed = rowd & KB_ROWMASK(row);
-
-			if (pressed && !tosakbd->keycode[scancode])
-				dev_warn(&dev->dev,
-						"unhandled scancode: 0x%02x\n",
-						scancode);
-
-			input_report_key(tosakbd->input,
-					tosakbd->keycode[scancode],
-					pressed);
-			if (pressed)
-				num_pressed++;
-		}
-
-		tosakbd_reset_col(col);
-	}
-
-	tosakbd_activate_all();
-
-	input_sync(tosakbd->input);
-
-	/* if any keys are pressed, enable the timer */
-	if (num_pressed)
-		mod_timer(&tosakbd->timer, jiffies + SCAN_INTERVAL);
-
- out:
-	spin_unlock_irqrestore(&tosakbd->lock, flags);
-}
-
-/*
- * tosa keyboard interrupt handler.
- */
-static irqreturn_t tosakbd_interrupt(int irq, void *__dev)
-{
-	struct platform_device *dev = __dev;
-	struct tosakbd *tosakbd = platform_get_drvdata(dev);
-
-	if (!timer_pending(&tosakbd->timer)) {
-		/** wait chattering delay **/
-		udelay(20);
-		tosakbd_scankeyboard(dev);
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * tosa timer checking for released keys
- */
-static void tosakbd_timer_callback(unsigned long __dev)
-{
-	struct platform_device *dev = (struct platform_device *)__dev;
-
-	tosakbd_scankeyboard(dev);
-}
-
-#ifdef CONFIG_PM
-static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
-{
-	struct tosakbd *tosakbd = platform_get_drvdata(dev);
-	unsigned long flags;
-
-	spin_lock_irqsave(&tosakbd->lock, flags);
-	tosakbd->suspended = true;
-	spin_unlock_irqrestore(&tosakbd->lock, flags);
-
-	del_timer_sync(&tosakbd->timer);
-
-	return 0;
-}
-
-static int tosakbd_resume(struct platform_device *dev)
-{
-	struct tosakbd *tosakbd = platform_get_drvdata(dev);
-
-	tosakbd->suspended = false;
-	tosakbd_scankeyboard(dev);
-
-	return 0;
-}
-#else
-#define tosakbd_suspend		NULL
-#define tosakbd_resume		NULL
-#endif
-
-static int __devinit tosakbd_probe(struct platform_device *pdev) {
-
-	int i;
-	struct tosakbd *tosakbd;
-	struct input_dev *input_dev;
-	int error;
-
-	tosakbd = kzalloc(sizeof(struct tosakbd), GFP_KERNEL);
-	if (!tosakbd)
-		return -ENOMEM;
-
-	input_dev = input_allocate_device();
-	if (!input_dev) {
-		kfree(tosakbd);
-		return -ENOMEM;
-	}
-
-	platform_set_drvdata(pdev, tosakbd);
-
-	spin_lock_init(&tosakbd->lock);
-
-	/* Init Keyboard rescan timer */
-	init_timer(&tosakbd->timer);
-	tosakbd->timer.function = tosakbd_timer_callback;
-	tosakbd->timer.data = (unsigned long) pdev;
-
-	tosakbd->input = input_dev;
-
-	input_set_drvdata(input_dev, tosakbd);
-	input_dev->name = "Tosa Keyboard";
-	input_dev->phys = "tosakbd/input0";
-	input_dev->dev.parent = &pdev->dev;
-
-	input_dev->id.bustype = BUS_HOST;
-	input_dev->id.vendor = 0x0001;
-	input_dev->id.product = 0x0001;
-	input_dev->id.version = 0x0100;
-
-	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_REP);
-	input_dev->keycode = tosakbd->keycode;
-	input_dev->keycodesize = sizeof(tosakbd->keycode[0]);
-	input_dev->keycodemax = ARRAY_SIZE(tosakbd_keycode);
-
-	memcpy(tosakbd->keycode, tosakbd_keycode, sizeof(tosakbd_keycode));
-
-	for (i = 0; i < ARRAY_SIZE(tosakbd_keycode); i++)
-		__set_bit(tosakbd->keycode[i], input_dev->keybit);
-	__clear_bit(KEY_RESERVED, input_dev->keybit);
-
-	/* Setup sense interrupts - RisingEdge Detect, sense lines as inputs */
-	for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) {
-		int gpio = TOSA_GPIO_KEY_SENSE(i);
-		int irq;
-		error = gpio_request(gpio, "tosakbd");
-		if (error < 0) {
-			printk(KERN_ERR "tosakbd: failed to request GPIO %d, "
-				" error %d\n", gpio, error);
-			goto fail;
-		}
-
-		error = gpio_direction_input(TOSA_GPIO_KEY_SENSE(i));
-		if (error < 0) {
-			printk(KERN_ERR "tosakbd: failed to configure input"
-				" direction for GPIO %d, error %d\n",
-				gpio, error);
-			gpio_free(gpio);
-			goto fail;
-		}
-
-		irq = gpio_to_irq(gpio);
-		if (irq < 0) {
-			error = irq;
-			printk(KERN_ERR "gpio-keys: Unable to get irq number"
-				" for GPIO %d, error %d\n",
-				gpio, error);
-			gpio_free(gpio);
-			goto fail;
-		}
-
-		error = request_irq(irq, tosakbd_interrupt,
-					IRQF_DISABLED | IRQF_TRIGGER_RISING,
-					"tosakbd", pdev);
-
-		if (error) {
-			printk("tosakbd: Can't get IRQ: %d: error %d!\n",
-					irq, error);
-			gpio_free(gpio);
-			goto fail;
-		}
-	}
-
-	/* Set Strobe lines as outputs - set high */
-	for (i = 0; i < TOSA_KEY_STROBE_NUM; i++) {
-		int gpio = TOSA_GPIO_KEY_STROBE(i);
-		error = gpio_request(gpio, "tosakbd");
-		if (error < 0) {
-			printk(KERN_ERR "tosakbd: failed to request GPIO %d, "
-				" error %d\n", gpio, error);
-			goto fail2;
-		}
-
-		error = gpio_direction_output(gpio, 1);
-		if (error < 0) {
-			printk(KERN_ERR "tosakbd: failed to configure input"
-				" direction for GPIO %d, error %d\n",
-				gpio, error);
-			gpio_free(gpio);
-			goto fail2;
-		}
-
-	}
-
-	error = input_register_device(input_dev);
-	if (error) {
-		printk(KERN_ERR "tosakbd: Unable to register input device, "
-			"error: %d\n", error);
-		goto fail2;
-	}
-
-	printk(KERN_INFO "input: Tosa Keyboard Registered\n");
-
-	return 0;
-
-fail2:
-	while (--i >= 0)
-		gpio_free(TOSA_GPIO_KEY_STROBE(i));
-
-	i = TOSA_KEY_SENSE_NUM;
-fail:
-	while (--i >= 0) {
-		free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), pdev);
-		gpio_free(TOSA_GPIO_KEY_SENSE(i));
-	}
-
-	platform_set_drvdata(pdev, NULL);
-	input_free_device(input_dev);
-	kfree(tosakbd);
-
-	return error;
-}
-
-static int __devexit tosakbd_remove(struct platform_device *dev)
-{
-	int i;
-	struct tosakbd *tosakbd = platform_get_drvdata(dev);
-
-	for (i = 0; i < TOSA_KEY_STROBE_NUM; i++)
-		gpio_free(TOSA_GPIO_KEY_STROBE(i));
-
-	for (i = 0; i < TOSA_KEY_SENSE_NUM; i++) {
-		free_irq(gpio_to_irq(TOSA_GPIO_KEY_SENSE(i)), dev);
-		gpio_free(TOSA_GPIO_KEY_SENSE(i));
-	}
-
-	del_timer_sync(&tosakbd->timer);
-
-	input_unregister_device(tosakbd->input);
-
-	kfree(tosakbd);
-
-	return 0;
-}
-
-static struct platform_driver tosakbd_driver = {
-	.probe		= tosakbd_probe,
-	.remove		= __devexit_p(tosakbd_remove),
-	.suspend	= tosakbd_suspend,
-	.resume		= tosakbd_resume,
-	.driver		= {
-		.name	= "tosa-keyboard",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __devinit tosakbd_init(void)
-{
-	return platform_driver_register(&tosakbd_driver);
-}
-
-static void __exit tosakbd_exit(void)
-{
-	platform_driver_unregister(&tosakbd_driver);
-}
-
-module_init(tosakbd_init);
-module_exit(tosakbd_exit);
-
-MODULE_AUTHOR("Dirk Opfer <Dirk@Opfer-Online.de>");
-MODULE_DESCRIPTION("Tosa Keyboard Driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:tosa-keyboard");