Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 414 insertions, 0 deletions

diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c
new file mode 100644
index 00000000000..bc22849c6c7
--- /dev/null
+++ b/drivers/input/mouse/hil_ptr.c
@@ -0,0 +1,414 @@
+/*
+ * Generic linux-input device driver for axis-bearing devices
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * HP-HIL Technical Reference Manual.  Hewlett Packard Product No. 45918A
+ *
+ */
+
+#include <linux/hil.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/pci_ids.h>
+
+#define PREFIX "HIL PTR: "
+#define HIL_GENERIC_NAME "HIL pointer device"
+
+MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
+MODULE_DESCRIPTION(HIL_GENERIC_NAME " driver");
+MODULE_LICENSE("Dual BSD/GPL");
+
+
+#define TABLET_SIMULATES_MOUSE	/* allow tablet to be used as mouse */
+#undef  TABLET_AUTOADJUST	/* auto-adjust valid tablet ranges */
+
+
+#define HIL_PTR_MAX_LENGTH 16
+
+struct hil_ptr {
+	struct input_dev dev;
+	struct serio *serio;
+
+	/* Input buffer and index for packets from HIL bus. */
+	hil_packet data[HIL_PTR_MAX_LENGTH];
+	int idx4; /* four counts per packet */
+
+	/* Raw device info records from HIL bus, see hil.h for fields. */
+	char	idd[HIL_PTR_MAX_LENGTH];	/* DID byte and IDD record */
+	char	rsc[HIL_PTR_MAX_LENGTH];	/* RSC record */
+	char	exd[HIL_PTR_MAX_LENGTH];	/* EXD record */
+	char	rnm[HIL_PTR_MAX_LENGTH + 1];	/* RNM record + NULL term. */
+
+	/* Extra device details not contained in struct input_dev. */
+	unsigned int nbtn, naxes;
+	unsigned int btnmap[7];
+
+	/* Something to sleep around with. */
+	struct semaphore sem;
+};
+
+/* Process a complete packet after transfer from the HIL */
+static void hil_ptr_process_record(struct hil_ptr *ptr)
+{
+	struct input_dev *dev = &ptr->dev;
+	hil_packet *data = ptr->data;
+	hil_packet p;
+	int idx, i, cnt, laxis;
+	int ax16, absdev;
+
+	idx = ptr->idx4/4;
+	p = data[idx - 1];
+
+	if ((p & ~HIL_CMDCT_POL) == 
+	    (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) goto report;
+	if ((p & ~HIL_CMDCT_RPL) == 
+	    (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL)) goto report;
+
+	/* Not a poll response.  See if we are loading config records. */
+	switch (p & HIL_PKT_DATA_MASK) {
+	case HIL_CMD_IDD:
+		for (i = 0; i < idx; i++)
+			ptr->idd[i] = ptr->data[i] & HIL_PKT_DATA_MASK;
+		for (; i < HIL_PTR_MAX_LENGTH; i++)
+			ptr->idd[i] = 0;
+		break;
+	case HIL_CMD_RSC:
+		for (i = 0; i < idx; i++)
+			ptr->rsc[i] = ptr->data[i] & HIL_PKT_DATA_MASK;
+		for (; i < HIL_PTR_MAX_LENGTH; i++)
+			ptr->rsc[i] = 0;
+		break;
+	case HIL_CMD_EXD:
+		for (i = 0; i < idx; i++)
+			ptr->exd[i] = ptr->data[i] & HIL_PKT_DATA_MASK;
+		for (; i < HIL_PTR_MAX_LENGTH; i++)
+			ptr->exd[i] = 0;
+		break;
+	case HIL_CMD_RNM:
+		for (i = 0; i < idx; i++)
+			ptr->rnm[i] = ptr->data[i] & HIL_PKT_DATA_MASK;
+		for (; i < HIL_PTR_MAX_LENGTH + 1; i++)
+			ptr->rnm[i] = '\0';
+		break;
+	default:
+		/* These occur when device isn't present */
+		if (p == (HIL_ERR_INT | HIL_PKT_CMD)) break; 
+		/* Anything else we'd like to know about. */
+		printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p);
+		break;
+	}
+	goto out;
+
+ report:
+	if ((p & HIL_CMDCT_POL) != idx - 1) {
+		printk(KERN_WARNING PREFIX "Malformed poll packet %x (idx = %i)\n", p, idx);
+		goto out;
+	}
+
+	i = (ptr->data[0] & HIL_POL_AXIS_ALT) ? 3 : 0;
+	laxis = ptr->data[0] & HIL_POL_NUM_AXES_MASK;
+	laxis += i;
+
+	ax16 = ptr->idd[1] & HIL_IDD_HEADER_16BIT; /* 8 or 16bit resolution */
+	absdev = ptr->idd[1] & HIL_IDD_HEADER_ABS; 
+
+	for (cnt = 1; i < laxis; i++) {
+		unsigned int lo,hi,val;
+		lo = ptr->data[cnt++] & HIL_PKT_DATA_MASK;
+		hi = ax16 ? (ptr->data[cnt++] & HIL_PKT_DATA_MASK) : 0;
+		if (absdev) {
+			val = lo + (hi<<8);
+#ifdef TABLET_AUTOADJUST
+			if (val < ptr->dev.absmin[ABS_X + i])
+				ptr->dev.absmin[ABS_X + i] = val;
+			if (val > ptr->dev.absmax[ABS_X + i])
+				ptr->dev.absmax[ABS_X + i] = val;
+#endif
+			if (i%3) val = ptr->dev.absmax[ABS_X + i] - val;
+			input_report_abs(dev, ABS_X + i, val);
+		} else {
+			val = (int) (((int8_t)lo) | ((int8_t)hi<<8));
+			if (i%3) val *= -1;
+			input_report_rel(dev, REL_X + i, val);
+		}
+	}
+
+	while (cnt < idx - 1) {
+		unsigned int btn;
+		int up;
+		btn = ptr->data[cnt++];
+		up = btn & 1;
+		btn &= 0xfe;
+		if (btn == 0x8e) {
+			continue; /* TODO: proximity == touch? */
+		}
+		else if ((btn > 0x8c) || (btn < 0x80)) continue;
+		btn = (btn - 0x80) >> 1;
+		btn = ptr->btnmap[btn];
+		input_report_key(dev, btn, !up);
+	}
+	input_sync(dev);
+ out:
+	ptr->idx4 = 0;
+	up(&ptr->sem);
+}
+
+static void hil_ptr_process_err(struct hil_ptr *ptr) {
+	printk(KERN_WARNING PREFIX "errored HIL packet\n");
+	ptr->idx4 = 0;
+	up(&ptr->sem);
+	return;
+}
+
+static irqreturn_t hil_ptr_interrupt(struct serio *serio, 
+        unsigned char data, unsigned int flags, struct pt_regs *regs)
+{
+	struct hil_ptr *ptr;
+	hil_packet packet;
+	int idx;
+
+	ptr = (struct hil_ptr *)serio->private;
+	if (ptr == NULL) {
+		BUG();
+		return IRQ_HANDLED;
+	}
+
+	if (ptr->idx4 >= (HIL_PTR_MAX_LENGTH * sizeof(hil_packet))) {
+		hil_ptr_process_err(ptr);
+		return IRQ_HANDLED;
+	}
+	idx = ptr->idx4/4;
+	if (!(ptr->idx4 % 4)) ptr->data[idx] = 0;
+	packet = ptr->data[idx];
+	packet |= ((hil_packet)data) << ((3 - (ptr->idx4 % 4)) * 8);
+	ptr->data[idx] = packet;
+
+	/* Records of N 4-byte hil_packets must terminate with a command. */
+	if ((++(ptr->idx4)) % 4) return IRQ_HANDLED;
+	if ((packet & 0xffff0000) != HIL_ERR_INT) {
+		hil_ptr_process_err(ptr);
+		return IRQ_HANDLED;
+	}
+	if (packet & HIL_PKT_CMD) 
+		hil_ptr_process_record(ptr);
+	return IRQ_HANDLED;
+}
+
+static void hil_ptr_disconnect(struct serio *serio)
+{
+	struct hil_ptr *ptr;
+
+	ptr = (struct hil_ptr *)serio->private;
+	if (ptr == NULL) {
+		BUG();
+		return;
+	}
+
+	input_unregister_device(&ptr->dev);
+	serio_close(serio);
+	kfree(ptr);
+}
+
+static void hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
+{
+	struct hil_ptr	*ptr;
+	char		*txt;
+	unsigned int	i, naxsets, btntype;
+	uint8_t		did, *idd;
+
+	if (serio->type != (SERIO_HIL_MLC | SERIO_HIL)) return;
+
+	if (!(ptr = kmalloc(sizeof(struct hil_ptr), GFP_KERNEL))) return;
+	memset(ptr, 0, sizeof(struct hil_ptr));
+
+	if (serio_open(serio, driver)) goto bail0;
+
+	serio->private = ptr;
+	ptr->serio = serio;
+	ptr->dev.private = ptr;
+
+	init_MUTEX_LOCKED(&(ptr->sem));
+
+	/* Get device info.  MLC driver supplies devid/status/etc. */
+	serio->write(serio, 0);
+	serio->write(serio, 0);
+	serio->write(serio, HIL_PKT_CMD >> 8);
+	serio->write(serio, HIL_CMD_IDD);
+	down(&(ptr->sem));
+
+	serio->write(serio, 0);
+	serio->write(serio, 0);
+	serio->write(serio, HIL_PKT_CMD >> 8);
+	serio->write(serio, HIL_CMD_RSC);
+	down(&(ptr->sem));
+
+	serio->write(serio, 0);
+	serio->write(serio, 0);
+	serio->write(serio, HIL_PKT_CMD >> 8);
+	serio->write(serio, HIL_CMD_RNM);
+	down(&(ptr->sem));
+
+	serio->write(serio, 0);
+	serio->write(serio, 0);
+	serio->write(serio, HIL_PKT_CMD >> 8);
+	serio->write(serio, HIL_CMD_EXD);
+	down(&(ptr->sem));
+
+	up(&(ptr->sem));
+
+	init_input_dev(&ptr->dev);
+	did = ptr->idd[0];
+	idd = ptr->idd + 1;
+	txt = "unknown";
+	if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) {
+		ptr->dev.evbit[0] = BIT(EV_REL);
+		txt = "relative";
+	}
+
+	if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_ABS) {
+		ptr->dev.evbit[0] = BIT(EV_ABS);
+		txt = "absolute";
+	}
+	if (!ptr->dev.evbit[0]) {
+		goto bail1;
+	}
+
+	ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd);
+	if (ptr->nbtn) ptr->dev.evbit[0] |= BIT(EV_KEY);
+
+	naxsets = HIL_IDD_NUM_AXSETS(*idd);
+	ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd);
+
+	printk(KERN_INFO PREFIX "HIL pointer device found (did: 0x%02x, axis: %s)\n",
+			did, txt);
+	printk(KERN_INFO PREFIX "HIL pointer has %i buttons and %i sets of %i axes\n",
+			ptr->nbtn, naxsets, ptr->naxes);
+	
+	btntype = BTN_MISC;
+	if ((did & HIL_IDD_DID_ABS_TABLET_MASK) == HIL_IDD_DID_ABS_TABLET)
+#ifdef TABLET_SIMULATES_MOUSE
+		btntype = BTN_TOUCH;
+#else
+		btntype = BTN_DIGI;
+#endif
+	if ((did & HIL_IDD_DID_ABS_TSCREEN_MASK) == HIL_IDD_DID_ABS_TSCREEN)
+		btntype = BTN_TOUCH;
+		
+	if ((did & HIL_IDD_DID_REL_MOUSE_MASK) == HIL_IDD_DID_REL_MOUSE)
+		btntype = BTN_MOUSE;
+
+	for (i = 0; i < ptr->nbtn; i++) {
+		set_bit(btntype | i, ptr->dev.keybit);
+		ptr->btnmap[i] = btntype | i;
+	}
+
+	if (btntype == BTN_MOUSE) {
+		/* Swap buttons 2 and 3 */
+		ptr->btnmap[1] = BTN_MIDDLE;
+		ptr->btnmap[2] = BTN_RIGHT;
+	}
+
+	if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) {
+		for (i = 0; i < ptr->naxes; i++) {
+			set_bit(REL_X + i, ptr->dev.relbit);
+		}
+		for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) {
+			set_bit(REL_X + i, ptr->dev.relbit);
+		}
+	} else {
+		for (i = 0; i < ptr->naxes; i++) {
+	  		set_bit(ABS_X + i, ptr->dev.absbit);
+			ptr->dev.absmin[ABS_X + i] = 0;
+			ptr->dev.absmax[ABS_X + i] = 
+				HIL_IDD_AXIS_MAX((ptr->idd + 1), i);
+		}
+		for (i = 3; (i < ptr->naxes + 3) && (naxsets > 1); i++) {
+			set_bit(ABS_X + i, ptr->dev.absbit);
+			ptr->dev.absmin[ABS_X + i] = 0;
+			ptr->dev.absmax[ABS_X + i] = 
+				HIL_IDD_AXIS_MAX((ptr->idd + 1), (i - 3));
+		}
+#ifdef TABLET_AUTOADJUST
+		for (i = 0; i < ABS_MAX; i++) {
+			int diff = ptr->dev.absmax[ABS_X + i] / 10;
+			ptr->dev.absmin[ABS_X + i] += diff;
+			ptr->dev.absmax[ABS_X + i] -= diff;
+		}
+#endif
+	}
+
+	ptr->dev.name = strlen(ptr->rnm) ? ptr->rnm : HIL_GENERIC_NAME;
+
+	ptr->dev.id.bustype	= BUS_HIL;
+	ptr->dev.id.vendor	= PCI_VENDOR_ID_HP;
+	ptr->dev.id.product	= 0x0001; /* TODO: get from ptr->rsc */
+	ptr->dev.id.version	= 0x0100; /* TODO: get from ptr->rsc */
+	ptr->dev.dev		= &serio->dev;
+
+	input_register_device(&ptr->dev);
+	printk(KERN_INFO "input: %s (%s), ID: %d\n",
+                ptr->dev.name, 
+		(btntype == BTN_MOUSE) ? "HIL mouse":"HIL tablet or touchpad",
+		did);
+
+	return;
+ bail1:
+	serio_close(serio);
+ bail0:
+	kfree(ptr);
+	return;
+}
+
+
+static struct serio_driver hil_ptr_serio_driver = {
+	.driver		= {
+		.name	= "hil_ptr",
+	},
+	.description	= "HP HIL mouse/tablet driver",
+	.connect =	hil_ptr_connect,
+	.disconnect =	hil_ptr_disconnect,
+	.interrupt =	hil_ptr_interrupt
+};
+
+static int __init hil_ptr_init(void)
+{
+	serio_register_driver(&hil_ptr_serio_driver);
+        return 0;
+}
+                
+static void __exit hil_ptr_exit(void)
+{
+	serio_unregister_driver(&hil_ptr_serio_driver);
+}
+                        
+module_init(hil_ptr_init);
+module_exit(hil_ptr_exit);