Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 370 insertions, 0 deletions

diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c
new file mode 100644
index 00000000000..d12b93ae390
--- /dev/null
+++ b/drivers/input/mouse/sermouse.c
@@ -0,0 +1,370 @@
+/*
+ * $Id: sermouse.c,v 1.17 2002/03/13 10:03:43 vojtech Exp $
+ *
+ *  Copyright (c) 1999-2001 Vojtech Pavlik
+ */
+
+/*
+ *  Serial mouse driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/config.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"Serial mouse driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static char *sermouse_protocols[] = { "None", "Mouse Systems Mouse", "Sun Mouse", "Microsoft Mouse",
+					"Logitech M+ Mouse", "Microsoft MZ Mouse", "Logitech MZ+ Mouse",
+					"Logitech MZ++ Mouse"};
+
+struct sermouse {
+	struct input_dev dev;
+	signed char buf[8];
+	unsigned char count;
+	unsigned char type;
+	unsigned long last;
+	char phys[32];
+};
+
+/*
+ * sermouse_process_msc() analyzes the incoming MSC/Sun bytestream and
+ * applies some prediction to the data, resulting in 96 updates per
+ * second, which is as good as a PS/2 or USB mouse.
+ */
+
+static void sermouse_process_msc(struct sermouse *sermouse, signed char data, struct pt_regs *regs)
+{
+	struct input_dev *dev = &sermouse->dev;
+	signed char *buf = sermouse->buf;
+
+	input_regs(dev, regs);
+
+	switch (sermouse->count) {
+
+		case 0:
+			if ((data & 0xf8) != 0x80) return;
+			input_report_key(dev, BTN_LEFT,   !(data & 4));
+			input_report_key(dev, BTN_RIGHT,  !(data & 1));
+			input_report_key(dev, BTN_MIDDLE, !(data & 2));
+			break;
+
+		case 1:
+		case 3:
+			input_report_rel(dev, REL_X, data / 2);
+			input_report_rel(dev, REL_Y, -buf[1]);
+			buf[0] = data - data / 2;
+			break;
+
+		case 2:
+		case 4:
+			input_report_rel(dev, REL_X, buf[0]);
+			input_report_rel(dev, REL_Y, buf[1] - data);
+			buf[1] = data / 2;
+			break;
+	}
+
+	input_sync(dev);
+
+	if (++sermouse->count == (5 - ((sermouse->type == SERIO_SUN) << 1)))
+		sermouse->count = 0;
+}
+
+/*
+ * sermouse_process_ms() anlyzes the incoming MS(Z/+/++) bytestream and
+ * generates events. With prediction it gets 80 updates/sec, assuming
+ * standard 3-byte packets and 1200 bps.
+ */
+
+static void sermouse_process_ms(struct sermouse *sermouse, signed char data, struct pt_regs *regs)
+{
+	struct input_dev *dev = &sermouse->dev;
+	signed char *buf = sermouse->buf;
+
+	if (data & 0x40) sermouse->count = 0;
+
+	input_regs(dev, regs);
+
+	switch (sermouse->count) {
+
+		case 0:
+			buf[1] = data;
+			input_report_key(dev, BTN_LEFT,   (data >> 5) & 1);
+			input_report_key(dev, BTN_RIGHT,  (data >> 4) & 1);
+			break;
+
+		case 1:
+			buf[2] = data;
+			data = (signed char) (((buf[1] << 6) & 0xc0) | (data & 0x3f));
+			input_report_rel(dev, REL_X, data / 2);
+			input_report_rel(dev, REL_Y, buf[4]);
+			buf[3] = data - data / 2;
+			break;
+
+		case 2:
+			/* Guessing the state of the middle button on 3-button MS-protocol mice - ugly. */
+			if ((sermouse->type == SERIO_MS) && !data && !buf[2] && !((buf[0] & 0xf0) ^ buf[1]))
+				input_report_key(dev, BTN_MIDDLE, !test_bit(BTN_MIDDLE, dev->key));
+			buf[0] = buf[1];
+
+			data = (signed char) (((buf[1] << 4) & 0xc0) | (data & 0x3f));
+			input_report_rel(dev, REL_X, buf[3]);
+			input_report_rel(dev, REL_Y, data - buf[4]);
+			buf[4] = data / 2;
+			break;
+
+		case 3:
+
+			switch (sermouse->type) {
+
+				case SERIO_MS:
+					 sermouse->type = SERIO_MP;
+
+				case SERIO_MP:
+					if ((data >> 2) & 3) break;	/* M++ Wireless Extension packet. */
+					input_report_key(dev, BTN_MIDDLE, (data >> 5) & 1);
+					input_report_key(dev, BTN_SIDE,   (data >> 4) & 1);
+					break;
+
+				case SERIO_MZP:
+				case SERIO_MZPP:
+					input_report_key(dev, BTN_SIDE,   (data >> 5) & 1);
+
+				case SERIO_MZ:
+					input_report_key(dev, BTN_MIDDLE, (data >> 4) & 1);
+					input_report_rel(dev, REL_WHEEL,  (data & 8) - (data & 7));
+					break;
+			}
+
+			break;
+
+		case 4:
+		case 6:	/* MZ++ packet type. We can get these bytes for M++ too but we ignore them later. */
+			buf[1] = (data >> 2) & 0x0f;
+			break;
+
+		case 5:
+		case 7: /* Ignore anything besides MZ++ */
+			if (sermouse->type != SERIO_MZPP) break;
+
+			switch (buf[1]) {
+
+				case 1: /* Extra mouse info */
+
+					input_report_key(dev, BTN_SIDE, (data >> 4) & 1);
+					input_report_key(dev, BTN_EXTRA, (data >> 5) & 1);
+					input_report_rel(dev, data & 0x80 ? REL_HWHEEL : REL_WHEEL, (data & 7) - (data & 8));
+
+					break;
+
+				default: /* We don't decode anything else yet. */
+
+					printk(KERN_WARNING
+						"sermouse.c: Received MZ++ packet %x, don't know how to handle.\n", buf[1]);
+					break;
+			}
+
+			break;
+	}
+
+	input_sync(dev);
+
+	sermouse->count++;
+}
+
+/*
+ * sermouse_interrupt() handles incoming characters, either gathering them into
+ * packets or passing them to the command routine as command output.
+ */
+
+static irqreturn_t sermouse_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags, struct pt_regs *regs)
+{
+	struct sermouse *sermouse = serio_get_drvdata(serio);
+
+	if (time_after(jiffies, sermouse->last + HZ/10)) sermouse->count = 0;
+	sermouse->last = jiffies;
+
+	if (sermouse->type > SERIO_SUN)
+		sermouse_process_ms(sermouse, data, regs);
+	else
+		sermouse_process_msc(sermouse, data, regs);
+	return IRQ_HANDLED;
+}
+
+/*
+ * sermouse_disconnect() cleans up after we don't want talk
+ * to the mouse anymore.
+ */
+
+static void sermouse_disconnect(struct serio *serio)
+{
+	struct sermouse *sermouse = serio_get_drvdata(serio);
+
+	input_unregister_device(&sermouse->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	kfree(sermouse);
+}
+
+/*
+ * sermouse_connect() is a callback form the serio module when
+ * an unhandled serio port is found.
+ */
+
+static int sermouse_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct sermouse *sermouse;
+	unsigned char c;
+	int err;
+
+	if (!serio->id.proto || serio->id.proto > SERIO_MZPP)
+		return -ENODEV;
+
+	if (!(sermouse = kmalloc(sizeof(struct sermouse), GFP_KERNEL)))
+		return -ENOMEM;
+
+	memset(sermouse, 0, sizeof(struct sermouse));
+
+	init_input_dev(&sermouse->dev);
+	sermouse->dev.evbit[0] = BIT(EV_KEY) | BIT(EV_REL);
+	sermouse->dev.keybit[LONG(BTN_MOUSE)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT);
+	sermouse->dev.relbit[0] = BIT(REL_X) | BIT(REL_Y);
+	sermouse->dev.private = sermouse;
+
+	sermouse->type = serio->id.proto;
+	c = serio->id.extra;
+
+	if (c & 0x01) set_bit(BTN_MIDDLE, sermouse->dev.keybit);
+	if (c & 0x02) set_bit(BTN_SIDE, sermouse->dev.keybit);
+	if (c & 0x04) set_bit(BTN_EXTRA, sermouse->dev.keybit);
+	if (c & 0x10) set_bit(REL_WHEEL, sermouse->dev.relbit);
+	if (c & 0x20) set_bit(REL_HWHEEL, sermouse->dev.relbit);
+
+	sprintf(sermouse->phys, "%s/input0", serio->phys);
+
+	sermouse->dev.name = sermouse_protocols[sermouse->type];
+	sermouse->dev.phys = sermouse->phys;
+	sermouse->dev.id.bustype = BUS_RS232;
+	sermouse->dev.id.vendor = sermouse->type;
+	sermouse->dev.id.product = c;
+	sermouse->dev.id.version = 0x0100;
+	sermouse->dev.dev = &serio->dev;
+
+	serio_set_drvdata(serio, sermouse);
+
+	err = serio_open(serio, drv);
+	if (err) {
+		serio_set_drvdata(serio, NULL);
+		kfree(sermouse);
+		return err;
+	}
+
+	input_register_device(&sermouse->dev);
+
+	printk(KERN_INFO "input: %s on %s\n", sermouse_protocols[sermouse->type], serio->phys);
+
+	return 0;
+}
+
+static struct serio_device_id sermouse_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MSC,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_SUN,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MS,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MP,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MZ,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MZP,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MZPP,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, sermouse_serio_ids);
+
+static struct serio_driver sermouse_drv = {
+	.driver		= {
+		.name	= "sermouse",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= sermouse_serio_ids,
+	.interrupt	= sermouse_interrupt,
+	.connect	= sermouse_connect,
+	.disconnect	= sermouse_disconnect,
+};
+
+static int __init sermouse_init(void)
+{
+	serio_register_driver(&sermouse_drv);
+	return 0;
+}
+
+static void __exit sermouse_exit(void)
+{
+	serio_unregister_driver(&sermouse_drv);
+}
+
+module_init(sermouse_init);
+module_exit(sermouse_exit);