Input: i8042 - let serio bus suspend ports

Let serio subsystem take care of suspending the ports; concentrate
on suspending/resuming the controller itself.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

1 files changed, 29 insertions, 27 deletions

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index c3fdfc1f342..b90a2cddc8a 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -724,7 +724,7 @@ static int i8042_controller_init(void)
 	if (~i8042_read_status() & I8042_STR_KEYLOCK) {
 		if (i8042_unlock)
 			i8042_ctr |= I8042_CTR_IGNKEYLOCK;
-		 else
+		else
 			printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
 	}
 	spin_unlock_irqrestore(&i8042_lock, flags);
@@ -791,27 +791,6 @@ static void i8042_controller_reset(void)
 
 
 /*
- * Here we try to reset everything back to a state in which the BIOS will be
- * able to talk to the hardware when rebooting.
- */
-
-static void i8042_controller_cleanup(void)
-{
-	int i;
-
-/*
- * Reset anything that is connected to the ports.
- */
-
-	for (i = 0; i < I8042_NUM_PORTS; i++)
-		if (i8042_ports[i].serio)
-			serio_cleanup(i8042_ports[i].serio);
-
-	i8042_controller_reset();
-}
-
-
-/*
  * i8042_panic_blink() will flash the keyboard LEDs and is called when
  * kernel panics. Flashing LEDs is useful for users running X who may
  * not see the console and will help distingushing panics from "real"
@@ -857,13 +836,22 @@ static long i8042_panic_blink(long count)
 
 #undef DELAY
 
+#ifdef CONFIG_PM
 /*
- * Here we try to restore the original BIOS settings
+ * Here we try to restore the original BIOS settings. We only want to
+ * do that once, when we really suspend, not when we taking memory
+ * snapshot for swsusp (in this case we'll perform required cleanup
+ * as part of shutdown process).
  */
 
 static int i8042_suspend(struct platform_device *dev, pm_message_t state)
 {
-	i8042_controller_cleanup();
+	if (dev->dev.power.power_state.event != state.event) {
+		if (state.event == PM_EVENT_SUSPEND)
+			i8042_controller_reset();
+
+		dev->dev.power.power_state = state;
+	}
 
 	return 0;
 }
@@ -877,6 +865,12 @@ static int i8042_resume(struct platform_device *dev)
 {
 	int error;
 
+/*
+ * Do not bother with restoring state if we haven't suspened yet
+ */
+	if (dev->dev.power.power_state.event == PM_EVENT_ON)
+		return 0;
+
 	error = i8042_controller_check();
 	if (error)
 		return error;
@@ -886,9 +880,12 @@ static int i8042_resume(struct platform_device *dev)
 		return error;
 
 /*
- * Restore pre-resume CTR value and disable all ports
+ * Restore original CTR value and disable all ports
  */
 
+	i8042_ctr = i8042_initial_ctr;
+	if (i8042_direct)
+		i8042_ctr &= ~I8042_CTR_XLATE;
 	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
 	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
@@ -909,8 +906,11 @@ static int i8042_resume(struct platform_device *dev)
 
 	i8042_interrupt(0, NULL);
 
+	dev->dev.power.power_state = PMSG_ON;
+
 	return 0;
 }
+#endif /* CONFIG_PM */
 
 /*
  * We need to reset the 8042 back to original mode on system shutdown,
@@ -919,7 +919,7 @@ static int i8042_resume(struct platform_device *dev)
 
 static void i8042_shutdown(struct platform_device *dev)
 {
-	i8042_controller_cleanup();
+	i8042_controller_reset();
 }
 
 static int __devinit i8042_create_kbd_port(void)
@@ -1154,9 +1154,11 @@ static struct platform_driver i8042_driver = {
 	},
 	.probe		= i8042_probe,
 	.remove		= __devexit_p(i8042_remove),
+	.shutdown	= i8042_shutdown,
+#ifdef CONFIG_PM
 	.suspend	= i8042_suspend,
 	.resume		= i8042_resume,
-	.shutdown	= i8042_shutdown,
+#endif
 };
 
 static int __init i8042_init(void)