Merge branch 'linus' into stackprotector

Conflicts:
	arch/x86/include/asm/pda.h
	kernel/fork.c

10 files changed, 100 insertions, 74 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6e1e8c624f9..3d1ab8fa9ac 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -42,8 +42,9 @@ config TOUCHSCREEN_BITSY
 	  module will be called h3600_ts_input.
 
 config TOUCHSCREEN_CORGI
-	tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
+	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
 	depends on PXA_SHARPSL
+	select CORGI_SSP_DEPRECATED
 	default y
 	help
 	  Say Y here to enable the driver for the touchscreen on the
@@ -54,6 +55,9 @@ config TOUCHSCREEN_CORGI
 	  To compile this driver as a module, choose M here: the
 	  module will be called corgi_ts.
 
+	  NOTE: this driver is deprecated, try enable SPI and generic
+	  ADS7846-based touchscreen driver.
+
 config TOUCHSCREEN_FUJITSU
 	tristate "Fujitsu serial touchscreen"
 	select SERIO
@@ -219,7 +223,7 @@ config TOUCHSCREEN_ATMEL_TSADCC
 
 config TOUCHSCREEN_UCB1400
 	tristate "Philips UCB1400 touchscreen"
-	select AC97_BUS
+	depends on AC97_BUS
 	depends on UCB1400_CORE
 	help
 	  This enables support for the Philips UCB1400 touchscreen interface.
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 8583c766d56..e1ece89fe92 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -69,6 +69,17 @@ struct ts_event {
 	int	ignore;
 };
 
+/*
+ * We allocate this separately to avoid cache line sharing issues when
+ * driver is used with DMA-based SPI controllers (like atmel_spi) on
+ * systems where main memory is not DMA-coherent (most non-x86 boards).
+ */
+struct ads7846_packet {
+	u8			read_x, read_y, read_z1, read_z2, pwrdown;
+	u16			dummy;		/* for the pwrdown read */
+	struct ts_event		tc;
+};
+
 struct ads7846 {
 	struct input_dev	*input;
 	char			phys[32];
@@ -86,9 +97,7 @@ struct ads7846 {
 	u16			x_plate_ohms;
 	u16			pressure_max;
 
-	u8			read_x, read_y, read_z1, read_z2, pwrdown;
-	u16			dummy;		/* for the pwrdown read */
-	struct ts_event		tc;
+	struct ads7846_packet	*packet;
 
 	struct spi_transfer	xfer[18];
 	struct spi_message	msg[5];
@@ -463,10 +472,11 @@ static ssize_t ads7846_disable_store(struct device *dev,
 				     const char *buf, size_t count)
 {
 	struct ads7846 *ts = dev_get_drvdata(dev);
-	char *endp;
-	int i;
+	long i;
+
+	if (strict_strtoul(buf, 10, &i))
+		return -EINVAL;
 
-	i = simple_strtoul(buf, &endp, 10);
 	spin_lock_irq(&ts->lock);
 
 	if (i)
@@ -512,16 +522,17 @@ static int get_pendown_state(struct ads7846 *ts)
 static void ads7846_rx(void *ads)
 {
 	struct ads7846		*ts = ads;
+	struct ads7846_packet	*packet = ts->packet;
 	unsigned		Rt;
 	u16			x, y, z1, z2;
 
 	/* ads7846_rx_val() did in-place conversion (including byteswap) from
 	 * on-the-wire format as part of debouncing to get stable readings.
 	 */
-	x = ts->tc.x;
-	y = ts->tc.y;
-	z1 = ts->tc.z1;
-	z2 = ts->tc.z2;
+	x = packet->tc.x;
+	y = packet->tc.y;
+	z1 = packet->tc.z1;
+	z2 = packet->tc.z2;
 
 	/* range filtering */
 	if (x == MAX_12BIT)
@@ -545,10 +556,10 @@ static void ads7846_rx(void *ads)
 	 * the maximum. Don't report it to user space, repeat at least
 	 * once more the measurement
 	 */
-	if (ts->tc.ignore || Rt > ts->pressure_max) {
+	if (packet->tc.ignore || Rt > ts->pressure_max) {
 #ifdef VERBOSE
 		pr_debug("%s: ignored %d pressure %d\n",
-			ts->spi->dev.bus_id, ts->tc.ignore, Rt);
+			ts->spi->dev.bus_id, packet->tc.ignore, Rt);
 #endif
 		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
 			      HRTIMER_MODE_REL);
@@ -641,6 +652,7 @@ static int ads7846_no_filter(void *ads, int data_idx, int *val)
 static void ads7846_rx_val(void *ads)
 {
 	struct ads7846 *ts = ads;
+	struct ads7846_packet *packet = ts->packet;
 	struct spi_message *m;
 	struct spi_transfer *t;
 	int val;
@@ -660,7 +672,7 @@ static void ads7846_rx_val(void *ads)
 	case ADS7846_FILTER_REPEAT:
 		break;
 	case ADS7846_FILTER_IGNORE:
-		ts->tc.ignore = 1;
+		packet->tc.ignore = 1;
 		/* Last message will contain ads7846_rx() as the
 		 * completion function.
 		 */
@@ -668,7 +680,7 @@ static void ads7846_rx_val(void *ads)
 		break;
 	case ADS7846_FILTER_OK:
 		*(u16 *)t->rx_buf = val;
-		ts->tc.ignore = 0;
+		packet->tc.ignore = 0;
 		m = &ts->msg[++ts->msg_idx];
 		break;
 	default:
@@ -685,7 +697,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 	struct ads7846	*ts = container_of(handle, struct ads7846, timer);
 	int		status = 0;
 
-	spin_lock_irq(&ts->lock);
+	spin_lock(&ts->lock);
 
 	if (unlikely(!get_pendown_state(ts) ||
 		     device_suspended(&ts->spi->dev))) {
@@ -716,7 +728,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 			dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
 	}
 
-	spin_unlock_irq(&ts->lock);
+	spin_unlock(&ts->lock);
 	return HRTIMER_NORESTART;
 }
 
@@ -773,7 +785,6 @@ static void ads7846_disable(struct ads7846 *ts)
 	/* we know the chip's in lowpower mode since we always
 	 * leave it that way after every request
 	 */
-
 }
 
 /* Must be called with ts->lock held */
@@ -849,6 +860,7 @@ static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts)
 static int __devinit ads7846_probe(struct spi_device *spi)
 {
 	struct ads7846			*ts;
+	struct ads7846_packet		*packet;
 	struct input_dev		*input_dev;
 	struct ads7846_platform_data	*pdata = spi->dev.platform_data;
 	struct spi_message		*m;
@@ -884,14 +896,16 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		return err;
 
 	ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
+	packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL);
 	input_dev = input_allocate_device();
-	if (!ts || !input_dev) {
+	if (!ts || !packet || !input_dev) {
 		err = -ENOMEM;
 		goto err_free_mem;
 	}
 
 	dev_set_drvdata(&spi->dev, ts);
 
+	ts->packet = packet;
 	ts->spi = spi;
 	ts->input = input_dev;
 	ts->vref_mv = pdata->vref_mv;
@@ -963,13 +977,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	spi_message_init(m);
 
 	/* y- still on; turn on only y+ (and ADC) */
-	ts->read_y = READ_Y(vref);
-	x->tx_buf = &ts->read_y;
+	packet->read_y = READ_Y(vref);
+	x->tx_buf = &packet->read_y;
 	x->len = 1;
 	spi_message_add_tail(x, m);
 
 	x++;
-	x->rx_buf = &ts->tc.y;
+	x->rx_buf = &packet->tc.y;
 	x->len = 2;
 	spi_message_add_tail(x, m);
 
@@ -981,12 +995,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		x->delay_usecs = pdata->settle_delay_usecs;
 
 		x++;
-		x->tx_buf = &ts->read_y;
+		x->tx_buf = &packet->read_y;
 		x->len = 1;
 		spi_message_add_tail(x, m);
 
 		x++;
-		x->rx_buf = &ts->tc.y;
+		x->rx_buf = &packet->tc.y;
 		x->len = 2;
 		spi_message_add_tail(x, m);
 	}
@@ -999,13 +1013,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	/* turn y- off, x+ on, then leave in lowpower */
 	x++;
-	ts->read_x = READ_X(vref);
-	x->tx_buf = &ts->read_x;
+	packet->read_x = READ_X(vref);
+	x->tx_buf = &packet->read_x;
 	x->len = 1;
 	spi_message_add_tail(x, m);
 
 	x++;
-	x->rx_buf = &ts->tc.x;
+	x->rx_buf = &packet->tc.x;
 	x->len = 2;
 	spi_message_add_tail(x, m);
 
@@ -1014,12 +1028,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		x->delay_usecs = pdata->settle_delay_usecs;
 
 		x++;
-		x->tx_buf = &ts->read_x;
+		x->tx_buf = &packet->read_x;
 		x->len = 1;
 		spi_message_add_tail(x, m);
 
 		x++;
-		x->rx_buf = &ts->tc.x;
+		x->rx_buf = &packet->tc.x;
 		x->len = 2;
 		spi_message_add_tail(x, m);
 	}
@@ -1033,13 +1047,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		spi_message_init(m);
 
 		x++;
-		ts->read_z1 = READ_Z1(vref);
-		x->tx_buf = &ts->read_z1;
+		packet->read_z1 = READ_Z1(vref);
+		x->tx_buf = &packet->read_z1;
 		x->len = 1;
 		spi_message_add_tail(x, m);
 
 		x++;
-		x->rx_buf = &ts->tc.z1;
+		x->rx_buf = &packet->tc.z1;
 		x->len = 2;
 		spi_message_add_tail(x, m);
 
@@ -1048,12 +1062,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 			x->delay_usecs = pdata->settle_delay_usecs;
 
 			x++;
-			x->tx_buf = &ts->read_z1;
+			x->tx_buf = &packet->read_z1;
 			x->len = 1;
 			spi_message_add_tail(x, m);
 
 			x++;
-			x->rx_buf = &ts->tc.z1;
+			x->rx_buf = &packet->tc.z1;
 			x->len = 2;
 			spi_message_add_tail(x, m);
 		}
@@ -1065,13 +1079,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		spi_message_init(m);
 
 		x++;
-		ts->read_z2 = READ_Z2(vref);
-		x->tx_buf = &ts->read_z2;
+		packet->read_z2 = READ_Z2(vref);
+		x->tx_buf = &packet->read_z2;
 		x->len = 1;
 		spi_message_add_tail(x, m);
 
 		x++;
-		x->rx_buf = &ts->tc.z2;
+		x->rx_buf = &packet->tc.z2;
 		x->len = 2;
 		spi_message_add_tail(x, m);
 
@@ -1080,12 +1094,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 			x->delay_usecs = pdata->settle_delay_usecs;
 
 			x++;
-			x->tx_buf = &ts->read_z2;
+			x->tx_buf = &packet->read_z2;
 			x->len = 1;
 			spi_message_add_tail(x, m);
 
 			x++;
-			x->rx_buf = &ts->tc.z2;
+			x->rx_buf = &packet->tc.z2;
 			x->len = 2;
 			spi_message_add_tail(x, m);
 		}
@@ -1099,13 +1113,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	spi_message_init(m);
 
 	x++;
-	ts->pwrdown = PWRDOWN;
-	x->tx_buf = &ts->pwrdown;
+	packet->pwrdown = PWRDOWN;
+	x->tx_buf = &packet->pwrdown;
 	x->len = 1;
 	spi_message_add_tail(x, m);
 
 	x++;
-	x->rx_buf = &ts->dummy;
+	x->rx_buf = &packet->dummy;
 	x->len = 2;
 	CS_CHANGE(*x);
 	spi_message_add_tail(x, m);
@@ -1158,6 +1172,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		ts->filter_cleanup(ts->filter_data);
  err_free_mem:
 	input_free_device(input_dev);
+	kfree(packet);
 	kfree(ts);
 	return err;
 }
@@ -1183,6 +1198,7 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 	if (ts->filter_cleanup)
 		ts->filter_cleanup(ts->filter_data);
 
+	kfree(ts->packet);
 	kfree(ts);
 
 	dev_dbg(&spi->dev, "unregistered touchscreen\n");
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index eee126b19e8..a89a6a8f05e 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -91,6 +91,9 @@ struct atmel_tsadcc {
 	char			phys[32];
 	struct clk		*clk;
 	int			irq;
+	unsigned int		prev_absx;
+	unsigned int		prev_absy;
+	unsigned char		bufferedmeasure;
 };
 
 static void __iomem		*tsc_base;
@@ -100,10 +103,9 @@ static void __iomem		*tsc_base;
 
 static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
 {
-	struct input_dev *input_dev = ((struct atmel_tsadcc *)dev)->input;
+	struct atmel_tsadcc	*ts_dev = (struct atmel_tsadcc *)dev;
+	struct input_dev	*input_dev = ts_dev->input;
 
-	unsigned int absx;
-	unsigned int absy;
 	unsigned int status;
 	unsigned int reg;
 
@@ -121,6 +123,7 @@ static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
 		atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
 
 		input_report_key(input_dev, BTN_TOUCH, 0);
+		ts_dev->bufferedmeasure = 0;
 		input_sync(input_dev);
 
 	} else if (status & ATMEL_TSADCC_PENCNT) {
@@ -138,16 +141,23 @@ static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
 	} else if (status & ATMEL_TSADCC_EOC(3)) {
 		/* Conversion finished */
 
-		absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
-		absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
-
-		absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
-		absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
-
-		input_report_abs(input_dev, ABS_X, absx);
-		input_report_abs(input_dev, ABS_Y, absy);
-		input_report_key(input_dev, BTN_TOUCH, 1);
-		input_sync(input_dev);
+		if (ts_dev->bufferedmeasure) {
+			/* Last measurement is always discarded, since it can
+			 * be erroneous.
+			 * Always report previous measurement */
+			input_report_abs(input_dev, ABS_X, ts_dev->prev_absx);
+			input_report_abs(input_dev, ABS_Y, ts_dev->prev_absy);
+			input_report_key(input_dev, BTN_TOUCH, 1);
+			input_sync(input_dev);
+		} else
+			ts_dev->bufferedmeasure = 1;
+
+		/* Now make new measurement */
+		ts_dev->prev_absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
+		ts_dev->prev_absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
+
+		ts_dev->prev_absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
+		ts_dev->prev_absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
 	}
 
 	return IRQ_HANDLED;
@@ -223,6 +233,7 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
 	}
 
 	ts_dev->input = input_dev;
+	ts_dev->bufferedmeasure = 0;
 
 	snprintf(ts_dev->phys, sizeof(ts_dev->phys),
 		 "%s/input0", pdev->dev.bus_id);
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
index d20689cdbd5..8f38c5e55ce 100644
--- a/drivers/input/touchscreen/elo.c
+++ b/drivers/input/touchscreen/elo.c
@@ -262,7 +262,7 @@ static int elo_setup_10(struct elo *elo)
 		input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 
 	printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
-		"features: %x02x, controller: 0x%02x\n",
+		"features: 0x%02x, controller: 0x%02x\n",
 		elo_types[(packet[1] -'0') & 0x03],
 		packet[5], packet[4], packet[3], packet[7]);
 
diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c
index c38d4e0f95c..a89700e7ace 100644
--- a/drivers/input/touchscreen/hp680_ts_input.c
+++ b/drivers/input/touchscreen/hp680_ts_input.c
@@ -5,7 +5,7 @@
 #include <asm/io.h>
 #include <asm/delay.h>
 #include <asm/adc.h>
-#include <asm/hp6xx.h>
+#include <mach/hp6xx.h>
 
 #define MODNAME "hp680_ts_input"
 
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 37a555f3730..1d11e2be9ef 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -3,8 +3,7 @@
  *                         Wolfson WM97xx AC97 Codecs.
  *
  * Copyright 2004, 2007 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  * Parts Copyright : Ian Molton <spyro@f2s.com>
  *                   Andrew Zabolotny <zap@homelink.ru>
  *
@@ -32,7 +31,7 @@
 #include <linux/interrupt.h>
 #include <linux/wm97xx.h>
 #include <linux/io.h>
-#include <mach/pxa-regs.h>
+#include <mach/regs-ac97.h>
 
 #define VERSION		"0.13"
 
@@ -296,6 +295,6 @@ module_init(mainstone_wm97xx_init);
 module_exit(mainstone_wm97xx_exit);
 
 /* Module information */
-MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
 MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
index 372efbc694f..6b5be742c27 100644
--- a/drivers/input/touchscreen/wm9705.c
+++ b/drivers/input/touchscreen/wm9705.c
@@ -2,8 +2,7 @@
  * wm9705.c  --  Codec driver for Wolfson WM9705 AC97 Codec.
  *
  * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  * Parts Copyright : Ian Molton <spyro@f2s.com>
  *                   Andrew Zabolotny <zap@homelink.ru>
  *                   Russell King <rmk@arm.linux.org.uk>
@@ -347,6 +346,6 @@ struct wm97xx_codec_drv wm9705_codec = {
 EXPORT_SYMBOL_GPL(wm9705_codec);
 
 /* Module information */
-MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
 MODULE_DESCRIPTION("WM9705 Touch Screen Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index c8bb1e7335f..7490b05c356 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -2,8 +2,7 @@
  * wm9712.c  --  Codec driver for Wolfson WM9712 AC97 Codecs.
  *
  * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  * Parts Copyright : Ian Molton <spyro@f2s.com>
  *                   Andrew Zabolotny <zap@homelink.ru>
  *                   Russell King <rmk@arm.linux.org.uk>
@@ -462,6 +461,6 @@ struct wm97xx_codec_drv wm9712_codec = {
 EXPORT_SYMBOL_GPL(wm9712_codec);
 
 /* Module information */
-MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
 MODULE_DESCRIPTION("WM9712 Touch Screen Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 781ee83547e..238b5132712 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -2,8 +2,7 @@
  * wm9713.c  --  Codec touch driver for Wolfson WM9713 AC97 Codec.
  *
  * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  * Parts Copyright : Ian Molton <spyro@f2s.com>
  *                   Andrew Zabolotny <zap@homelink.ru>
  *                   Russell King <rmk@arm.linux.org.uk>
@@ -476,6 +475,6 @@ struct wm97xx_codec_drv wm9713_codec = {
 EXPORT_SYMBOL_GPL(wm9713_codec);
 
 /* Module information */
-MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
 MODULE_DESCRIPTION("WM9713 Touch Screen Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index d589ab0e3ad..d15aa11d705 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -3,8 +3,7 @@
  *                    and WM9713 AC97 Codecs.
  *
  * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  * Parts Copyright : Ian Molton <spyro@f2s.com>
  *                   Andrew Zabolotny <zap@homelink.ru>
  *                   Russell King <rmk@arm.linux.org.uk>
@@ -824,6 +823,6 @@ module_init(wm97xx_init);
 module_exit(wm97xx_exit);
 
 /* Module information */
-MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
 MODULE_DESCRIPTION("WM97xx Core - Touch Screen / AUX ADC / GPIO Driver");
 MODULE_LICENSE("GPL");