Merge branch 'next' into for-linus

7 files changed, 143 insertions, 81 deletions

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index ce6f48c695f..b9b7fc6ff1e 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -24,6 +24,7 @@
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
+#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <asm/irq.h>
@@ -68,6 +69,17 @@ struct ts_event {
 	int	ignore;
 };
 
+/*
+ * We allocate this separately to avoid cache line sharing issues when
+ * driver is used with DMA-based SPI controllers (like atmel_spi) on
+ * systems where main memory is not DMA-coherent (most non-x86 boards).
+ */
+struct ads7846_packet {
+	u8			read_x, read_y, read_z1, read_z2, pwrdown;
+	u16			dummy;		/* for the pwrdown read */
+	struct ts_event		tc;
+};
+
 struct ads7846 {
 	struct input_dev	*input;
 	char			phys[32];
@@ -85,9 +97,7 @@ struct ads7846 {
 	u16			x_plate_ohms;
 	u16			pressure_max;
 
-	u8			read_x, read_y, read_z1, read_z2, pwrdown;
-	u16			dummy;		/* for the pwrdown read */
-	struct ts_event		tc;
+	struct ads7846_packet	*packet;
 
 	struct spi_transfer	xfer[18];
 	struct spi_message	msg[5];
@@ -116,6 +126,7 @@ struct ads7846 {
 	void			*filter_data;
 	void			(*filter_cleanup)(void *data);
 	int			(*get_pendown_state)(void);
+	int			gpio_pendown;
 };
 
 /* leave chip selected when we're done, for quicker re-select? */
@@ -461,10 +472,11 @@ static ssize_t ads7846_disable_store(struct device *dev,
 				     const char *buf, size_t count)
 {
 	struct ads7846 *ts = dev_get_drvdata(dev);
-	char *endp;
-	int i;
+	long i;
+
+	if (strict_strtoul(buf, 10, &i))
+		return -EINVAL;
 
-	i = simple_strtoul(buf, &endp, 10);
 	spin_lock_irq(&ts->lock);
 
 	if (i)
@@ -491,6 +503,14 @@ static struct attribute_group ads784x_attr_group = {
 
 /*--------------------------------------------------------------------------*/
 
+static int get_pendown_state(struct ads7846 *ts)
+{
+	if (ts->get_pendown_state)
+		return ts->get_pendown_state();
+
+	return !gpio_get_value(ts->gpio_pendown);
+}
+
 /*
  * PENIRQ only kicks the timer.  The timer only reissues the SPI transfer,
  * to retrieve touchscreen status.
@@ -502,16 +522,17 @@ static struct attribute_group ads784x_attr_group = {
 static void ads7846_rx(void *ads)
 {
 	struct ads7846		*ts = ads;
+	struct ads7846_packet	*packet = ts->packet;
 	unsigned		Rt;
 	u16			x, y, z1, z2;
 
 	/* ads7846_rx_val() did in-place conversion (including byteswap) from
 	 * on-the-wire format as part of debouncing to get stable readings.
 	 */
-	x = ts->tc.x;
-	y = ts->tc.y;
-	z1 = ts->tc.z1;
-	z2 = ts->tc.z2;
+	x = packet->tc.x;
+	y = packet->tc.y;
+	z1 = packet->tc.z1;
+	z2 = packet->tc.z2;
 
 	/* range filtering */
 	if (x == MAX_12BIT)
@@ -535,10 +556,10 @@ static void ads7846_rx(void *ads)
 	 * the maximum. Don't report it to user space, repeat at least
 	 * once more the measurement
 	 */
-	if (ts->tc.ignore || Rt > ts->pressure_max) {
+	if (packet->tc.ignore || Rt > ts->pressure_max) {
 #ifdef VERBOSE
 		pr_debug("%s: ignored %d pressure %d\n",
-			ts->spi->dev.bus_id, ts->tc.ignore, Rt);
+			ts->spi->dev.bus_id, packet->tc.ignore, Rt);
 #endif
 		hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_PERIOD),
 			      HRTIMER_MODE_REL);
@@ -550,7 +571,7 @@ static void ads7846_rx(void *ads)
 	 */
 	if (ts->penirq_recheck_delay_usecs) {
 		udelay(ts->penirq_recheck_delay_usecs);
-		if (!ts->get_pendown_state())
+		if (!get_pendown_state(ts))
 			Rt = 0;
 	}
 
@@ -631,6 +652,7 @@ static int ads7846_no_filter(void *ads, int data_idx, int *val)
 static void ads7846_rx_val(void *ads)
 {
 	struct ads7846 *ts = ads;
+	struct ads7846_packet *packet = ts->packet;
 	struct spi_message *m;
 	struct spi_transfer *t;
 	int val;
@@ -650,7 +672,7 @@ static void ads7846_rx_val(void *ads)
 	case ADS7846_FILTER_REPEAT:
 		break;
 	case ADS7846_FILTER_IGNORE:
-		ts->tc.ignore = 1;
+		packet->tc.ignore = 1;
 		/* Last message will contain ads7846_rx() as the
 		 * completion function.
 		 */
@@ -658,7 +680,7 @@ static void ads7846_rx_val(void *ads)
 		break;
 	case ADS7846_FILTER_OK:
 		*(u16 *)t->rx_buf = val;
-		ts->tc.ignore = 0;
+		packet->tc.ignore = 0;
 		m = &ts->msg[++ts->msg_idx];
 		break;
 	default:
@@ -677,7 +699,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle)
 
 	spin_lock_irq(&ts->lock);
 
-	if (unlikely(!ts->get_pendown_state() ||
+	if (unlikely(!get_pendown_state(ts) ||
 		     device_suspended(&ts->spi->dev))) {
 		if (ts->pendown) {
 			struct input_dev *input = ts->input;
@@ -716,7 +738,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle)
 	unsigned long flags;
 
 	spin_lock_irqsave(&ts->lock, flags);
-	if (likely(ts->get_pendown_state())) {
+	if (likely(get_pendown_state(ts))) {
 		if (!ts->irq_disabled) {
 			/* The ARM do_simple_IRQ() dispatcher doesn't act
 			 * like the other dispatchers:  it will report IRQs
@@ -763,7 +785,6 @@ static void ads7846_disable(struct ads7846 *ts)
 	/* we know the chip's in lowpower mode since we always
 	 * leave it that way after every request
 	 */
-
 }
 
 /* Must be called with ts->lock held */
@@ -806,9 +827,40 @@ static int ads7846_resume(struct spi_device *spi)
 	return 0;
 }
 
+static int __devinit setup_pendown(struct spi_device *spi, struct ads7846 *ts)
+{
+	struct ads7846_platform_data *pdata = spi->dev.platform_data;
+	int err;
+
+	/* REVISIT when the irq can be triggered active-low, or if for some
+	 * reason the touchscreen isn't hooked up, we don't need to access
+	 * the pendown state.
+	 */
+	if (!pdata->get_pendown_state && !gpio_is_valid(pdata->gpio_pendown)) {
+		dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
+		return -EINVAL;
+	}
+
+	if (pdata->get_pendown_state) {
+		ts->get_pendown_state = pdata->get_pendown_state;
+		return 0;
+	}
+
+	err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
+	if (err) {
+		dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
+				pdata->gpio_pendown);
+		return err;
+	}
+
+	ts->gpio_pendown = pdata->gpio_pendown;
+	return 0;
+}
+
 static int __devinit ads7846_probe(struct spi_device *spi)
 {
 	struct ads7846			*ts;
+	struct ads7846_packet		*packet;
 	struct input_dev		*input_dev;
 	struct ads7846_platform_data	*pdata = spi->dev.platform_data;
 	struct spi_message		*m;
@@ -833,15 +885,6 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	/* REVISIT when the irq can be triggered active-low, or if for some
-	 * reason the touchscreen isn't hooked up, we don't need to access
-	 * the pendown state.
-	 */
-	if (pdata->get_pendown_state == NULL) {
-		dev_dbg(&spi->dev, "no get_pendown_state function?\n");
-		return -EINVAL;
-	}
-
 	/* We'd set TX wordsize 8 bits and RX wordsize to 13 bits ... except
 	 * that even if the hardware can do that, the SPI controller driver
 	 * may not.  So we stick to very-portable 8 bit words, both RX and TX.
@@ -853,14 +896,16 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		return err;
 
 	ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
+	packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL);
 	input_dev = input_allocate_device();
-	if (!ts || !input_dev) {
+	if (!ts || !packet || !input_dev) {
 		err = -ENOMEM;
 		goto err_free_mem;
 	}
 
 	dev_set_drvdata(&spi->dev, ts);
 
+	ts->packet = packet;
 	ts->spi = spi;
 	ts->input = input_dev;
 	ts->vref_mv = pdata->vref_mv;
@@ -893,7 +938,10 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		ts->filter_data = ts;
 	} else
 		ts->filter = ads7846_no_filter;
-	ts->get_pendown_state = pdata->get_pendown_state;
+
+	err = setup_pendown(spi, ts);
+	if (err)
+		goto err_cleanup_filter;
 
 	if (pdata->penirq_recheck_delay_usecs)
 		ts->penirq_recheck_delay_usecs =
@@ -929,13 +977,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	spi_message_init(m);
 
 	/* y- still on; turn on only y+ (and ADC) */
-	ts->read_y = READ_Y(vref);
-	x->tx_buf = &ts->read_y;
+	packet->read_y = READ_Y(vref);
+	x->tx_buf = &packet->read_y;
 	x->len = 1;
 	spi_message_add_tail(x, m);
 
 	x++;
-	x->rx_buf = &ts->tc.y;
+	x->rx_buf = &packet->tc.y;
 	x->len = 2;
 	spi_message_add_tail(x, m);
 
@@ -947,12 +995,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		x->delay_usecs = pdata->settle_delay_usecs;
 
 		x++;
-		x->tx_buf = &ts->read_y;
+		x->tx_buf = &packet->read_y;
 		x->len = 1;
 		spi_message_add_tail(x, m);
 
 		x++;
-		x->rx_buf = &ts->tc.y;
+		x->rx_buf = &packet->tc.y;
 		x->len = 2;
 		spi_message_add_tail(x, m);
 	}
@@ -965,13 +1013,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 
 	/* turn y- off, x+ on, then leave in lowpower */
 	x++;
-	ts->read_x = READ_X(vref);
-	x->tx_buf = &ts->read_x;
+	packet->read_x = READ_X(vref);
+	x->tx_buf = &packet->read_x;
 	x->len = 1;
 	spi_message_add_tail(x, m);
 
 	x++;
-	x->rx_buf = &ts->tc.x;
+	x->rx_buf = &packet->tc.x;
 	x->len = 2;
 	spi_message_add_tail(x, m);
 
@@ -980,12 +1028,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		x->delay_usecs = pdata->settle_delay_usecs;
 
 		x++;
-		x->tx_buf = &ts->read_x;
+		x->tx_buf = &packet->read_x;
 		x->len = 1;
 		spi_message_add_tail(x, m);
 
 		x++;
-		x->rx_buf = &ts->tc.x;
+		x->rx_buf = &packet->tc.x;
 		x->len = 2;
 		spi_message_add_tail(x, m);
 	}
@@ -999,13 +1047,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		spi_message_init(m);
 
 		x++;
-		ts->read_z1 = READ_Z1(vref);
-		x->tx_buf = &ts->read_z1;
+		packet->read_z1 = READ_Z1(vref);
+		x->tx_buf = &packet->read_z1;
 		x->len = 1;
 		spi_message_add_tail(x, m);
 
 		x++;
-		x->rx_buf = &ts->tc.z1;
+		x->rx_buf = &packet->tc.z1;
 		x->len = 2;
 		spi_message_add_tail(x, m);
 
@@ -1014,12 +1062,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 			x->delay_usecs = pdata->settle_delay_usecs;
 
 			x++;
-			x->tx_buf = &ts->read_z1;
+			x->tx_buf = &packet->read_z1;
 			x->len = 1;
 			spi_message_add_tail(x, m);
 
 			x++;
-			x->rx_buf = &ts->tc.z1;
+			x->rx_buf = &packet->tc.z1;
 			x->len = 2;
 			spi_message_add_tail(x, m);
 		}
@@ -1031,13 +1079,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 		spi_message_init(m);
 
 		x++;
-		ts->read_z2 = READ_Z2(vref);
-		x->tx_buf = &ts->read_z2;
+		packet->read_z2 = READ_Z2(vref);
+		x->tx_buf = &packet->read_z2;
 		x->len = 1;
 		spi_message_add_tail(x, m);
 
 		x++;
-		x->rx_buf = &ts->tc.z2;
+		x->rx_buf = &packet->tc.z2;
 		x->len = 2;
 		spi_message_add_tail(x, m);
 
@@ -1046,12 +1094,12 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 			x->delay_usecs = pdata->settle_delay_usecs;
 
 			x++;
-			x->tx_buf = &ts->read_z2;
+			x->tx_buf = &packet->read_z2;
 			x->len = 1;
 			spi_message_add_tail(x, m);
 
 			x++;
-			x->rx_buf = &ts->tc.z2;
+			x->rx_buf = &packet->tc.z2;
 			x->len = 2;
 			spi_message_add_tail(x, m);
 		}
@@ -1065,13 +1113,13 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	spi_message_init(m);
 
 	x++;
-	ts->pwrdown = PWRDOWN;
-	x->tx_buf = &ts->pwrdown;
+	packet->pwrdown = PWRDOWN;
+	x->tx_buf = &packet->pwrdown;
 	x->len = 1;
 	spi_message_add_tail(x, m);
 
 	x++;
-	x->rx_buf = &ts->dummy;
+	x->rx_buf = &packet->dummy;
 	x->len = 2;
 	CS_CHANGE(*x);
 	spi_message_add_tail(x, m);
@@ -1085,7 +1133,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 			spi->dev.driver->name, ts)) {
 		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
 		err = -EBUSY;
-		goto err_cleanup_filter;
+		goto err_free_gpio;
 	}
 
 	err = ads784x_hwmon_register(spi, ts);
@@ -1116,11 +1164,15 @@ static int __devinit ads7846_probe(struct spi_device *spi)
 	ads784x_hwmon_unregister(spi, ts);
  err_free_irq:
 	free_irq(spi->irq, ts);
+ err_free_gpio:
+	if (ts->gpio_pendown != -1)
+		gpio_free(ts->gpio_pendown);
  err_cleanup_filter:
 	if (ts->filter_cleanup)
 		ts->filter_cleanup(ts->filter_data);
  err_free_mem:
 	input_free_device(input_dev);
+	kfree(packet);
 	kfree(ts);
 	return err;
 }
@@ -1140,9 +1192,13 @@ static int __devexit ads7846_remove(struct spi_device *spi)
 	/* suspend left the IRQ disabled */
 	enable_irq(ts->spi->irq);
 
+	if (ts->gpio_pendown != -1)
+		gpio_free(ts->gpio_pendown);
+
 	if (ts->filter_cleanup)
 		ts->filter_cleanup(ts->filter_data);
 
+	kfree(ts->packet);
 	kfree(ts);
 
 	dev_dbg(&spi->dev, "unregistered touchscreen\n");
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index eee126b19e8..a89a6a8f05e 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -91,6 +91,9 @@ struct atmel_tsadcc {
 	char			phys[32];
 	struct clk		*clk;
 	int			irq;
+	unsigned int		prev_absx;
+	unsigned int		prev_absy;
+	unsigned char		bufferedmeasure;
 };
 
 static void __iomem		*tsc_base;
@@ -100,10 +103,9 @@ static void __iomem		*tsc_base;
 
 static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
 {
-	struct input_dev *input_dev = ((struct atmel_tsadcc *)dev)->input;
+	struct atmel_tsadcc	*ts_dev = (struct atmel_tsadcc *)dev;
+	struct input_dev	*input_dev = ts_dev->input;
 
-	unsigned int absx;
-	unsigned int absy;
 	unsigned int status;
 	unsigned int reg;
 
@@ -121,6 +123,7 @@ static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
 		atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
 
 		input_report_key(input_dev, BTN_TOUCH, 0);
+		ts_dev->bufferedmeasure = 0;
 		input_sync(input_dev);
 
 	} else if (status & ATMEL_TSADCC_PENCNT) {
@@ -138,16 +141,23 @@ static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
 	} else if (status & ATMEL_TSADCC_EOC(3)) {
 		/* Conversion finished */
 
-		absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
-		absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
-
-		absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
-		absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
-
-		input_report_abs(input_dev, ABS_X, absx);
-		input_report_abs(input_dev, ABS_Y, absy);
-		input_report_key(input_dev, BTN_TOUCH, 1);
-		input_sync(input_dev);
+		if (ts_dev->bufferedmeasure) {
+			/* Last measurement is always discarded, since it can
+			 * be erroneous.
+			 * Always report previous measurement */
+			input_report_abs(input_dev, ABS_X, ts_dev->prev_absx);
+			input_report_abs(input_dev, ABS_Y, ts_dev->prev_absy);
+			input_report_key(input_dev, BTN_TOUCH, 1);
+			input_sync(input_dev);
+		} else
+			ts_dev->bufferedmeasure = 1;
+
+		/* Now make new measurement */
+		ts_dev->prev_absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
+		ts_dev->prev_absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
+
+		ts_dev->prev_absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
+		ts_dev->prev_absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
 	}
 
 	return IRQ_HANDLED;
@@ -223,6 +233,7 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
 	}
 
 	ts_dev->input = input_dev;
+	ts_dev->bufferedmeasure = 0;
 
 	snprintf(ts_dev->phys, sizeof(ts_dev->phys),
 		 "%s/input0", pdev->dev.bus_id);
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 37a555f3730..ba648750a8d 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -3,8 +3,7 @@
  *                         Wolfson WM97xx AC97 Codecs.
  *
  * Copyright 2004, 2007 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  * Parts Copyright : Ian Molton <spyro@f2s.com>
  *                   Andrew Zabolotny <zap@homelink.ru>
  *
@@ -296,6 +295,6 @@ module_init(mainstone_wm97xx_init);
 module_exit(mainstone_wm97xx_exit);
 
 /* Module information */
-MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
 MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
index 372efbc694f..6b5be742c27 100644
--- a/drivers/input/touchscreen/wm9705.c
+++ b/drivers/input/touchscreen/wm9705.c
@@ -2,8 +2,7 @@
  * wm9705.c  --  Codec driver for Wolfson WM9705 AC97 Codec.
  *
  * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  * Parts Copyright : Ian Molton <spyro@f2s.com>
  *                   Andrew Zabolotny <zap@homelink.ru>
  *                   Russell King <rmk@arm.linux.org.uk>
@@ -347,6 +346,6 @@ struct wm97xx_codec_drv wm9705_codec = {
 EXPORT_SYMBOL_GPL(wm9705_codec);
 
 /* Module information */
-MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
 MODULE_DESCRIPTION("WM9705 Touch Screen Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index c8bb1e7335f..7490b05c356 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -2,8 +2,7 @@
  * wm9712.c  --  Codec driver for Wolfson WM9712 AC97 Codecs.
  *
  * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  * Parts Copyright : Ian Molton <spyro@f2s.com>
  *                   Andrew Zabolotny <zap@homelink.ru>
  *                   Russell King <rmk@arm.linux.org.uk>
@@ -462,6 +461,6 @@ struct wm97xx_codec_drv wm9712_codec = {
 EXPORT_SYMBOL_GPL(wm9712_codec);
 
 /* Module information */
-MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
 MODULE_DESCRIPTION("WM9712 Touch Screen Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 781ee83547e..238b5132712 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -2,8 +2,7 @@
  * wm9713.c  --  Codec touch driver for Wolfson WM9713 AC97 Codec.
  *
  * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  * Parts Copyright : Ian Molton <spyro@f2s.com>
  *                   Andrew Zabolotny <zap@homelink.ru>
  *                   Russell King <rmk@arm.linux.org.uk>
@@ -476,6 +475,6 @@ struct wm97xx_codec_drv wm9713_codec = {
 EXPORT_SYMBOL_GPL(wm9713_codec);
 
 /* Module information */
-MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
 MODULE_DESCRIPTION("WM9713 Touch Screen Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index d589ab0e3ad..d15aa11d705 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -3,8 +3,7 @@
  *                    and WM9713 AC97 Codecs.
  *
  * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
- * Author: Liam Girdwood
- *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
  * Parts Copyright : Ian Molton <spyro@f2s.com>
  *                   Andrew Zabolotny <zap@homelink.ru>
  *                   Russell King <rmk@arm.linux.org.uk>
@@ -824,6 +823,6 @@ module_init(wm97xx_init);
 module_exit(wm97xx_exit);
 
 /* Module information */
-MODULE_AUTHOR("Liam Girdwood <liam.girdwood@wolfsonmicro.com>");
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
 MODULE_DESCRIPTION("WM97xx Core - Touch Screen / AUX ADC / GPIO Driver");
 MODULE_LICENSE("GPL");