Merge tag 'v3.9-rc3' into next

Merge with mainline to bring in module_platform_driver_probe() and
devm_ioremap_resource().

9 files changed, 518 insertions, 544 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 9a647ee1136..f9a5fd89bc0 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -517,9 +517,9 @@ config TOUCHSCREEN_TOUCHWIN
 	  To compile this driver as a module, choose M here: the
 	  module will be called touchwin.
 
-config TOUCHSCREEN_TI_TSCADC
+config TOUCHSCREEN_TI_AM335X_TSC
 	tristate "TI Touchscreen Interface"
-	depends on ARCH_OMAP2PLUS
+	depends on MFD_TI_AM335X_TSCADC
 	help
 	  Say Y here if you have 4/5/8 wire touchscreen controller
 	  to be connected to the ADC controller on your TI AM335x SoC.
@@ -527,7 +527,7 @@ config TOUCHSCREEN_TI_TSCADC
 	  If unsure, say N.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called ti_tscadc.
+	  module will be called ti_am335x_tsc.
 
 config TOUCHSCREEN_ATMEL_TSADCC
 	tristate "Atmel Touchscreen Interface"
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 5f949c0bf82..6bfbeab67c9 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -51,7 +51,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR)	+= pixcir_i2c_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
 obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
-obj-$(CONFIG_TOUCHSCREEN_TI_TSCADC)	+= ti_tscadc.o
+obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC)	+= ti_am335x_tsc.o
 obj-$(CONFIG_TOUCHSCREEN_TNETV107X)	+= tnetv107x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 4f702b3ec1a..434c3df250c 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -236,7 +236,12 @@ static void __ads7846_disable(struct ads7846 *ts)
 /* Must be called with ts->lock held */
 static void __ads7846_enable(struct ads7846 *ts)
 {
-	regulator_enable(ts->reg);
+	int error;
+
+	error = regulator_enable(ts->reg);
+	if (error != 0)
+		dev_err(&ts->spi->dev, "Failed to enable supply: %d\n", error);
+
 	ads7846_restart(ts);
 }
 
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index d04f810cb1d..59aa24002c7 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -176,11 +176,17 @@
 /* Define for MXT_GEN_COMMAND_T6 */
 #define MXT_BOOT_VALUE		0xa5
 #define MXT_BACKUP_VALUE	0x55
-#define MXT_BACKUP_TIME		25	/* msec */
-#define MXT_RESET_TIME		65	/* msec */
+#define MXT_BACKUP_TIME		50	/* msec */
+#define MXT_RESET_TIME		200	/* msec */
 
 #define MXT_FWRESET_TIME	175	/* msec */
 
+/* MXT_SPT_GPIOPWM_T19 field */
+#define MXT_GPIO0_MASK		0x04
+#define MXT_GPIO1_MASK		0x08
+#define MXT_GPIO2_MASK		0x10
+#define MXT_GPIO3_MASK		0x20
+
 /* Command to unlock bootloader */
 #define MXT_UNLOCK_CMD_MSB	0xaa
 #define MXT_UNLOCK_CMD_LSB	0xdc
@@ -212,6 +218,8 @@
 /* Touchscreen absolute values */
 #define MXT_MAX_AREA		0xff
 
+#define MXT_PIXELS_PER_MM	20
+
 struct mxt_info {
 	u8 family_id;
 	u8 variant_id;
@@ -243,6 +251,8 @@ struct mxt_data {
 	const struct mxt_platform_data *pdata;
 	struct mxt_object *object_table;
 	struct mxt_info info;
+	bool is_tp;
+
 	unsigned int irq;
 	unsigned int max_x;
 	unsigned int max_y;
@@ -251,6 +261,7 @@ struct mxt_data {
 	u8 T6_reportid;
 	u8 T9_reportid_min;
 	u8 T9_reportid_max;
+	u8 T19_reportid;
 };
 
 static bool mxt_object_readable(unsigned int type)
@@ -502,6 +513,21 @@ static int mxt_write_object(struct mxt_data *data,
 	return mxt_write_reg(data->client, reg + offset, val);
 }
 
+static void mxt_input_button(struct mxt_data *data, struct mxt_message *message)
+{
+	struct input_dev *input = data->input_dev;
+	bool button;
+	int i;
+
+	/* Active-low switch */
+	for (i = 0; i < MXT_NUM_GPIO; i++) {
+		if (data->pdata->key_map[i] == KEY_RESERVED)
+			continue;
+		button = !(message->message[0] & MXT_GPIO0_MASK << i);
+		input_report_key(input, data->pdata->key_map[i], button);
+	}
+}
+
 static void mxt_input_touchevent(struct mxt_data *data,
 				      struct mxt_message *message, int id)
 {
@@ -585,6 +611,9 @@ static irqreturn_t mxt_interrupt(int irq, void *dev_id)
 			int id = reportid - data->T9_reportid_min;
 			mxt_input_touchevent(data, &message, id);
 			update_input = true;
+		} else if (message.reportid == data->T19_reportid) {
+			mxt_input_button(data, &message);
+			update_input = true;
 		} else {
 			mxt_dump_message(dev, &message);
 		}
@@ -764,6 +793,9 @@ static int mxt_get_object_table(struct mxt_data *data)
 			data->T9_reportid_min = min_id;
 			data->T9_reportid_max = max_id;
 			break;
+		case MXT_SPT_GPIOPWM_T19:
+			data->T19_reportid = min_id;
+			break;
 		}
 	}
 
@@ -777,7 +809,7 @@ static void mxt_free_object_table(struct mxt_data *data)
 	data->T6_reportid = 0;
 	data->T9_reportid_min = 0;
 	data->T9_reportid_max = 0;
-
+	data->T19_reportid = 0;
 }
 
 static int mxt_initialize(struct mxt_data *data)
@@ -1115,9 +1147,13 @@ static int mxt_probe(struct i2c_client *client,
 		goto err_free_mem;
 	}
 
-	input_dev->name = "Atmel maXTouch Touchscreen";
+	data->is_tp = pdata && pdata->is_tp;
+
+	input_dev->name = (data->is_tp) ? "Atmel maXTouch Touchpad" :
+					  "Atmel maXTouch Touchscreen";
 	snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
 		 client->adapter->nr, client->addr);
+
 	input_dev->phys = data->phys;
 
 	input_dev->id.bustype = BUS_I2C;
@@ -1140,6 +1176,29 @@ static int mxt_probe(struct i2c_client *client,
 	__set_bit(EV_KEY, input_dev->evbit);
 	__set_bit(BTN_TOUCH, input_dev->keybit);
 
+	if (data->is_tp) {
+		int i;
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+		__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+
+		for (i = 0; i < MXT_NUM_GPIO; i++)
+			if (pdata->key_map[i] != KEY_RESERVED)
+				__set_bit(pdata->key_map[i], input_dev->keybit);
+
+		__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+		__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+		__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+		__set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
+		__set_bit(BTN_TOOL_QUINTTAP, input_dev->keybit);
+
+		input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
+		input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
+		input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+				  MXT_PIXELS_PER_MM);
+		input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+				  MXT_PIXELS_PER_MM);
+	}
+
 	/* For single touch */
 	input_set_abs_params(input_dev, ABS_X,
 			     0, data->max_x, 0, 0);
@@ -1258,6 +1317,7 @@ static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
 static const struct i2c_device_id mxt_id[] = {
 	{ "qt602240_ts", 0 },
 	{ "atmel_mxt_ts", 0 },
+	{ "atmel_mxt_tp", 0 },
 	{ "mXT224", 0 },
 	{ }
 };
diff --git a/drivers/input/touchscreen/atmel_tsadcc.c b/drivers/input/touchscreen/atmel_tsadcc.c
index 55092d1c5cb..95f6785a94b 100644
--- a/drivers/input/touchscreen/atmel_tsadcc.c
+++ b/drivers/input/touchscreen/atmel_tsadcc.c
@@ -22,7 +22,7 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <mach/board.h>
+#include <linux/platform_data/atmel.h>
 #include <mach/cpu.h>
 
 /* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c
index 303966ffe1e..8f561e22bdd 100644
--- a/drivers/input/touchscreen/da9052_tsi.c
+++ b/drivers/input/touchscreen/da9052_tsi.c
@@ -27,8 +27,6 @@ struct da9052_tsi {
 	struct input_dev *dev;
 	struct delayed_work ts_pen_work;
 	struct mutex mutex;
-	unsigned int irq_pendwn;
-	unsigned int irq_datardy;
 	bool stopped;
 	bool adc_on;
 };
@@ -45,8 +43,8 @@ static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data)
 
 	if (!tsi->stopped) {
 		/* Mask PEN_DOWN event and unmask TSI_READY event */
-		disable_irq_nosync(tsi->irq_pendwn);
-		enable_irq(tsi->irq_datardy);
+		da9052_disable_irq_nosync(tsi->da9052, DA9052_IRQ_PENDOWN);
+		da9052_enable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
 
 		da9052_ts_adc_toggle(tsi, true);
 
@@ -137,8 +135,8 @@ static void da9052_ts_pen_work(struct work_struct *work)
 				return;
 
 			/* Mask TSI_READY event and unmask PEN_DOWN event */
-			disable_irq(tsi->irq_datardy);
-			enable_irq(tsi->irq_pendwn);
+			da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
+			da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
 		}
 	}
 }
@@ -197,7 +195,7 @@ static int da9052_ts_input_open(struct input_dev *input_dev)
 	mb();
 
 	/* Unmask PEN_DOWN event */
-	enable_irq(tsi->irq_pendwn);
+	da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
 
 	/* Enable Pen Detect Circuit */
 	return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG,
@@ -210,11 +208,11 @@ static void da9052_ts_input_close(struct input_dev *input_dev)
 
 	tsi->stopped = true;
 	mb();
-	disable_irq(tsi->irq_pendwn);
+	da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
 	cancel_delayed_work_sync(&tsi->ts_pen_work);
 
 	if (tsi->adc_on) {
-		disable_irq(tsi->irq_datardy);
+		da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
 		da9052_ts_adc_toggle(tsi, false);
 
 		/*
@@ -222,7 +220,7 @@ static void da9052_ts_input_close(struct input_dev *input_dev)
 		 * twice and we need to enable it to keep enable/disable
 		 * counter balanced. IRQ is still off though.
 		 */
-		enable_irq(tsi->irq_pendwn);
+		da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
 	}
 
 	/* Disable Pen Detect Circuit */
@@ -234,21 +232,12 @@ static int da9052_ts_probe(struct platform_device *pdev)
 	struct da9052 *da9052;
 	struct da9052_tsi *tsi;
 	struct input_dev *input_dev;
-	int irq_pendwn;
-	int irq_datardy;
 	int error;
 
 	da9052 = dev_get_drvdata(pdev->dev.parent);
 	if (!da9052)
 		return -EINVAL;
 
-	irq_pendwn = platform_get_irq_byname(pdev, "PENDWN");
-	irq_datardy = platform_get_irq_byname(pdev, "TSIRDY");
-	if (irq_pendwn < 0 || irq_datardy < 0) {
-		dev_err(da9052->dev, "Unable to determine device interrupts\n");
-		return -ENXIO;
-	}
-
 	tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!tsi || !input_dev) {
@@ -258,8 +247,6 @@ static int da9052_ts_probe(struct platform_device *pdev)
 
 	tsi->da9052 = da9052;
 	tsi->dev = input_dev;
-	tsi->irq_pendwn = da9052->irq_base + irq_pendwn;
-	tsi->irq_datardy = da9052->irq_base + irq_datardy;
 	tsi->stopped = true;
 	INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work);
 
@@ -287,31 +274,25 @@ static int da9052_ts_probe(struct platform_device *pdev)
 	/* Disable ADC */
 	da9052_ts_adc_toggle(tsi, false);
 
-	error = request_threaded_irq(tsi->irq_pendwn,
-				     NULL, da9052_ts_pendwn_irq,
-				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				     "PENDWN", tsi);
+	error = da9052_request_irq(tsi->da9052, DA9052_IRQ_PENDOWN,
+				"pendown-irq", da9052_ts_pendwn_irq, tsi);
 	if (error) {
 		dev_err(tsi->da9052->dev,
-			"Failed to register PENDWN IRQ %d, error = %d\n",
-			tsi->irq_pendwn, error);
+			"Failed to register PENDWN IRQ: %d\n", error);
 		goto err_free_mem;
 	}
 
-	error = request_threaded_irq(tsi->irq_datardy,
-				     NULL, da9052_ts_datardy_irq,
-				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				     "TSIRDY", tsi);
+	error = da9052_request_irq(tsi->da9052, DA9052_IRQ_TSIREADY,
+				"tsiready-irq", da9052_ts_datardy_irq, tsi);
 	if (error) {
 		dev_err(tsi->da9052->dev,
-			"Failed to register TSIRDY IRQ %d, error = %d\n",
-			tsi->irq_datardy, error);
+			"Failed to register TSIRDY IRQ :%d\n", error);
 		goto err_free_pendwn_irq;
 	}
 
 	/* Mask PEN_DOWN and TSI_READY events */
-	disable_irq(tsi->irq_pendwn);
-	disable_irq(tsi->irq_datardy);
+	da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
+	da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
 
 	error = da9052_configure_tsi(tsi);
 	if (error)
@@ -326,9 +307,9 @@ static int da9052_ts_probe(struct platform_device *pdev)
 	return 0;
 
 err_free_datardy_irq:
-	free_irq(tsi->irq_datardy, tsi);
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi);
 err_free_pendwn_irq:
-	free_irq(tsi->irq_pendwn, tsi);
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi);
 err_free_mem:
 	kfree(tsi);
 	input_free_device(input_dev);
@@ -342,8 +323,8 @@ static int  da9052_ts_remove(struct platform_device *pdev)
 
 	da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19);
 
-	free_irq(tsi->irq_pendwn, tsi);
-	free_irq(tsi->irq_datardy, tsi);
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi);
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi);
 
 	input_unregister_device(tsi->dev);
 	kfree(tsi);
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index 4a29ddf6bf1..1443532fe6c 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -314,15 +314,27 @@ static int mms114_start(struct mms114_data *data)
 	struct i2c_client *client = data->client;
 	int error;
 
-	if (data->core_reg)
-		regulator_enable(data->core_reg);
-	if (data->io_reg)
-		regulator_enable(data->io_reg);
+	error = regulator_enable(data->core_reg);
+	if (error) {
+		dev_err(&client->dev, "Failed to enable avdd: %d\n", error);
+		return error;
+	}
+
+	error = regulator_enable(data->io_reg);
+	if (error) {
+		dev_err(&client->dev, "Failed to enable vdd: %d\n", error);
+		regulator_disable(data->core_reg);
+		return error;
+	}
+
 	mdelay(MMS114_POWERON_DELAY);
 
 	error = mms114_setup_regs(data);
-	if (error < 0)
+	if (error < 0) {
+		regulator_disable(data->io_reg);
+		regulator_disable(data->core_reg);
 		return error;
+	}
 
 	if (data->pdata->cfg_pin)
 		data->pdata->cfg_pin(true);
@@ -335,16 +347,20 @@ static int mms114_start(struct mms114_data *data)
 static void mms114_stop(struct mms114_data *data)
 {
 	struct i2c_client *client = data->client;
+	int error;
 
 	disable_irq(client->irq);
 
 	if (data->pdata->cfg_pin)
 		data->pdata->cfg_pin(false);
 
-	if (data->io_reg)
-		regulator_disable(data->io_reg);
-	if (data->core_reg)
-		regulator_disable(data->core_reg);
+	error = regulator_disable(data->io_reg);
+	if (error)
+		dev_warn(&client->dev, "Failed to disable vdd: %d\n", error);
+
+	error = regulator_disable(data->core_reg);
+	if (error)
+		dev_warn(&client->dev, "Failed to disable avdd: %d\n", error);
 }
 
 static int mms114_input_open(struct input_dev *dev)
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
new file mode 100644
index 00000000000..51e7b87827a
--- /dev/null
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -0,0 +1,398 @@
+/*
+ * TI Touch Screen driver
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input/ti_am335x_tsc.h>
+#include <linux/delay.h>
+
+#include <linux/mfd/ti_am335x_tscadc.h>
+
+#define ADCFSM_STEPID		0x10
+#define SEQ_SETTLE		275
+#define MAX_12BIT		((1 << 12) - 1)
+
+struct titsc {
+	struct input_dev	*input;
+	struct ti_tscadc_dev	*mfd_tscadc;
+	unsigned int		irq;
+	unsigned int		wires;
+	unsigned int		x_plate_resistance;
+	bool			pen_down;
+	int			steps_to_configure;
+};
+
+static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
+{
+	return readl(ts->mfd_tscadc->tscadc_base + reg);
+}
+
+static void titsc_writel(struct titsc *tsc, unsigned int reg,
+					unsigned int val)
+{
+	writel(val, tsc->mfd_tscadc->tscadc_base + reg);
+}
+
+static void titsc_step_config(struct titsc *ts_dev)
+{
+	unsigned int	config;
+	int i, total_steps;
+
+	/* Configure the Step registers */
+	total_steps = 2 * ts_dev->steps_to_configure;
+
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_AVG_16 | STEPCONFIG_XPP;
+	switch (ts_dev->wires) {
+	case 4:
+		config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+		break;
+	case 5:
+		config |= STEPCONFIG_YNN |
+				STEPCONFIG_INP_AN4 | STEPCONFIG_XNN |
+				STEPCONFIG_YPP;
+		break;
+	case 8:
+		config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+		break;
+	}
+
+	for (i = 1; i <= ts_dev->steps_to_configure; i++) {
+		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
+		titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
+	}
+
+	config = 0;
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_AVG_16 | STEPCONFIG_YNN |
+			STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1;
+	switch (ts_dev->wires) {
+	case 4:
+		config |= STEPCONFIG_YPP;
+		break;
+	case 5:
+		config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 |
+				STEPCONFIG_XNP | STEPCONFIG_YPN;
+		break;
+	case 8:
+		config |= STEPCONFIG_YPP;
+		break;
+	}
+
+	for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {
+		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
+		titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
+	}
+
+	config = 0;
+	/* Charge step configuration */
+	config = STEPCONFIG_XPP | STEPCONFIG_YNN |
+			STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR |
+			STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1;
+
+	titsc_writel(ts_dev, REG_CHARGECONFIG, config);
+	titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
+
+	config = 0;
+	/* Configure to calculate pressure */
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_AVG_16 | STEPCONFIG_YPP |
+			STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;
+	titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);
+	titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),
+			STEPCONFIG_OPENDLY);
+
+	config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;
+	titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);
+	titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
+			STEPCONFIG_OPENDLY);
+
+	titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
+}
+
+static void titsc_read_coordinates(struct titsc *ts_dev,
+				    unsigned int *x, unsigned int *y)
+{
+	unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT);
+	unsigned int prev_val_x = ~0, prev_val_y = ~0;
+	unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
+	unsigned int read, diff;
+	unsigned int i, channel;
+
+	/*
+	 * Delta filter is used to remove large variations in sampled
+	 * values from ADC. The filter tries to predict where the next
+	 * coordinate could be. This is done by taking a previous
+	 * coordinate and subtracting it form current one. Further the
+	 * algorithm compares the difference with that of a present value,
+	 * if true the value is reported to the sub system.
+	 */
+	for (i = 0; i < fifocount - 1; i++) {
+		read = titsc_readl(ts_dev, REG_FIFO0);
+		channel = read & 0xf0000;
+		channel = channel >> 0x10;
+		if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {
+			read &= 0xfff;
+			diff = abs(read - prev_val_x);
+			if (diff < prev_diff_x) {
+				prev_diff_x = diff;
+				*x = read;
+			}
+			prev_val_x = read;
+		}
+
+		read = titsc_readl(ts_dev, REG_FIFO1);
+		channel = read & 0xf0000;
+		channel = channel >> 0x10;
+		if ((channel >= ts_dev->steps_to_configure) &&
+			(channel < (2 * ts_dev->steps_to_configure - 1))) {
+			read &= 0xfff;
+			diff = abs(read - prev_val_y);
+			if (diff < prev_diff_y) {
+				prev_diff_y = diff;
+				*y = read;
+			}
+			prev_val_y = read;
+		}
+	}
+}
+
+static irqreturn_t titsc_irq(int irq, void *dev)
+{
+	struct titsc *ts_dev = dev;
+	struct input_dev *input_dev = ts_dev->input;
+	unsigned int status, irqclr = 0;
+	unsigned int x = 0, y = 0;
+	unsigned int z1, z2, z;
+	unsigned int fsm;
+	unsigned int fifo1count, fifo0count;
+	int i;
+
+	status = titsc_readl(ts_dev, REG_IRQSTATUS);
+	if (status & IRQENB_FIFO0THRES) {
+		titsc_read_coordinates(ts_dev, &x, &y);
+
+		z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;
+		z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;
+
+		fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT);
+		for (i = 0; i < fifo1count; i++)
+			titsc_readl(ts_dev, REG_FIFO1);
+
+		fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT);
+		for (i = 0; i < fifo0count; i++)
+			titsc_readl(ts_dev, REG_FIFO0);
+
+		if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
+			/*
+			 * Calculate pressure using formula
+			 * Resistance(touch) = x plate resistance *
+			 * x postion/4096 * ((z2 / z1) - 1)
+			 */
+			z = z2 - z1;
+			z *= x;
+			z *= ts_dev->x_plate_resistance;
+			z /= z1;
+			z = (z + 2047) >> 12;
+
+			if (z <= MAX_12BIT) {
+				input_report_abs(input_dev, ABS_X, x);
+				input_report_abs(input_dev, ABS_Y, y);
+				input_report_abs(input_dev, ABS_PRESSURE, z);
+				input_report_key(input_dev, BTN_TOUCH, 1);
+				input_sync(input_dev);
+			}
+		}
+		irqclr |= IRQENB_FIFO0THRES;
+	}
+
+	/*
+	 * Time for sequencer to settle, to read
+	 * correct state of the sequencer.
+	 */
+	udelay(SEQ_SETTLE);
+
+	status = titsc_readl(ts_dev, REG_RAWIRQSTATUS);
+	if (status & IRQENB_PENUP) {
+		/* Pen up event */
+		fsm = titsc_readl(ts_dev, REG_ADCFSM);
+		if (fsm == ADCFSM_STEPID) {
+			ts_dev->pen_down = false;
+			input_report_key(input_dev, BTN_TOUCH, 0);
+			input_report_abs(input_dev, ABS_PRESSURE, 0);
+			input_sync(input_dev);
+		} else {
+			ts_dev->pen_down = true;
+		}
+		irqclr |= IRQENB_PENUP;
+	}
+
+	titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+
+	titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
+	return IRQ_HANDLED;
+}
+
+/*
+ * The functions for inserting/removing driver as a module.
+ */
+
+static int titsc_probe(struct platform_device *pdev)
+{
+	struct titsc *ts_dev;
+	struct input_dev *input_dev;
+	struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
+	struct mfd_tscadc_board	*pdata;
+	int err;
+
+	pdata = tscadc_dev->dev->platform_data;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Could not find platform data\n");
+		return -EINVAL;
+	}
+
+	/* Allocate memory for device */
+	ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts_dev || !input_dev) {
+		dev_err(&pdev->dev, "failed to allocate memory.\n");
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	tscadc_dev->tsc = ts_dev;
+	ts_dev->mfd_tscadc = tscadc_dev;
+	ts_dev->input = input_dev;
+	ts_dev->irq = tscadc_dev->irq;
+	ts_dev->wires = pdata->tsc_init->wires;
+	ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
+	ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
+
+	err = request_irq(ts_dev->irq, titsc_irq,
+			  0, pdev->dev.driver->name, ts_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to allocate irq.\n");
+		goto err_free_mem;
+	}
+
+	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
+	titsc_step_config(ts_dev);
+	titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);
+
+	input_dev->name = "ti-tsc";
+	input_dev->dev.parent = &pdev->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
+
+	/* register to the input system */
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_free_irq;
+
+	platform_set_drvdata(pdev, ts_dev);
+	return 0;
+
+err_free_irq:
+	free_irq(ts_dev->irq, ts_dev);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts_dev);
+	return err;
+}
+
+static int titsc_remove(struct platform_device *pdev)
+{
+	struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
+	struct titsc *ts_dev = tscadc_dev->tsc;
+
+	free_irq(ts_dev->irq, ts_dev);
+
+	input_unregister_device(ts_dev->input);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(ts_dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int titsc_suspend(struct device *dev)
+{
+	struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
+	struct titsc *ts_dev = tscadc_dev->tsc;
+	unsigned int idle;
+
+	if (device_may_wakeup(tscadc_dev->dev)) {
+		idle = titsc_readl(ts_dev, REG_IRQENABLE);
+		titsc_writel(ts_dev, REG_IRQENABLE,
+				(idle | IRQENB_HW_PEN));
+		titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
+	}
+	return 0;
+}
+
+static int titsc_resume(struct device *dev)
+{
+	struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
+	struct titsc *ts_dev = tscadc_dev->tsc;
+
+	if (device_may_wakeup(tscadc_dev->dev)) {
+		titsc_writel(ts_dev, REG_IRQWAKEUP,
+				0x00);
+		titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
+	}
+	titsc_step_config(ts_dev);
+	titsc_writel(ts_dev, REG_FIFO0THR,
+			ts_dev->steps_to_configure);
+	return 0;
+}
+
+static const struct dev_pm_ops titsc_pm_ops = {
+	.suspend = titsc_suspend,
+	.resume  = titsc_resume,
+};
+#define TITSC_PM_OPS (&titsc_pm_ops)
+#else
+#define TITSC_PM_OPS NULL
+#endif
+
+static struct platform_driver ti_tsc_driver = {
+	.probe	= titsc_probe,
+	.remove	= titsc_remove,
+	.driver	= {
+		.name   = "tsc",
+		.owner	= THIS_MODULE,
+		.pm	= TITSC_PM_OPS,
+	},
+};
+module_platform_driver(ti_tsc_driver);
+
+MODULE_DESCRIPTION("TI touchscreen controller driver");
+MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c
deleted file mode 100644
index bcedf2e7468..00000000000
--- a/drivers/input/touchscreen/ti_tscadc.c
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * TI Touch Screen driver
- *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/input/ti_tscadc.h>
-#include <linux/delay.h>
-
-#define REG_IRQEOI		0x020
-#define REG_RAWIRQSTATUS	0x024
-#define REG_IRQSTATUS		0x028
-#define REG_IRQENABLE		0x02C
-#define REG_IRQWAKEUP		0x034
-#define REG_CTRL		0x040
-#define REG_ADCFSM		0x044
-#define REG_CLKDIV		0x04C
-#define REG_SE			0x054
-#define REG_IDLECONFIG		0x058
-#define REG_CHARGECONFIG	0x05C
-#define REG_CHARGEDELAY		0x060
-#define REG_STEPCONFIG(n)	(0x64 + ((n - 1) * 8))
-#define REG_STEPDELAY(n)	(0x68 + ((n - 1) * 8))
-#define REG_STEPCONFIG13	0x0C4
-#define REG_STEPDELAY13		0x0C8
-#define REG_STEPCONFIG14	0x0CC
-#define REG_STEPDELAY14		0x0D0
-#define REG_FIFO0CNT		0xE4
-#define REG_FIFO1THR		0xF4
-#define REG_FIFO0		0x100
-#define REG_FIFO1		0x200
-
-/*	Register Bitfields	*/
-#define IRQWKUP_ENB		BIT(0)
-#define STPENB_STEPENB		0x7FFF
-#define IRQENB_FIFO1THRES	BIT(5)
-#define IRQENB_PENUP		BIT(9)
-#define STEPCONFIG_MODE_HWSYNC	0x2
-#define STEPCONFIG_SAMPLES_AVG	(1 << 4)
-#define STEPCONFIG_XPP		(1 << 5)
-#define STEPCONFIG_XNN		(1 << 6)
-#define STEPCONFIG_YPP		(1 << 7)
-#define STEPCONFIG_YNN		(1 << 8)
-#define STEPCONFIG_XNP		(1 << 9)
-#define STEPCONFIG_YPN		(1 << 10)
-#define STEPCONFIG_INM		(1 << 18)
-#define STEPCONFIG_INP		(1 << 20)
-#define STEPCONFIG_INP_5	(1 << 21)
-#define STEPCONFIG_FIFO1	(1 << 26)
-#define STEPCONFIG_OPENDLY	0xff
-#define STEPCONFIG_Z1		(3 << 19)
-#define STEPIDLE_INP		(1 << 22)
-#define STEPCHARGE_RFP		(1 << 12)
-#define STEPCHARGE_INM		(1 << 15)
-#define STEPCHARGE_INP		(1 << 19)
-#define STEPCHARGE_RFM		(1 << 23)
-#define STEPCHARGE_DELAY	0x1
-#define CNTRLREG_TSCSSENB	(1 << 0)
-#define CNTRLREG_STEPID		(1 << 1)
-#define CNTRLREG_STEPCONFIGWRT	(1 << 2)
-#define CNTRLREG_4WIRE		(1 << 5)
-#define CNTRLREG_5WIRE		(1 << 6)
-#define CNTRLREG_8WIRE		(3 << 5)
-#define CNTRLREG_TSCENB		(1 << 7)
-#define ADCFSM_STEPID		0x10
-
-#define SEQ_SETTLE		275
-#define ADC_CLK			3000000
-#define MAX_12BIT		((1 << 12) - 1)
-#define TSCADC_DELTA_X		15
-#define TSCADC_DELTA_Y		15
-
-struct tscadc {
-	struct input_dev	*input;
-	struct clk		*tsc_ick;
-	void __iomem		*tsc_base;
-	unsigned int		irq;
-	unsigned int		wires;
-	unsigned int		x_plate_resistance;
-	bool			pen_down;
-};
-
-static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg)
-{
-	return readl(ts->tsc_base + reg);
-}
-
-static void tscadc_writel(struct tscadc *tsc, unsigned int reg,
-					unsigned int val)
-{
-	writel(val, tsc->tsc_base + reg);
-}
-
-static void tscadc_step_config(struct tscadc *ts_dev)
-{
-	unsigned int	config;
-	int i;
-
-	/* Configure the Step registers */
-
-	config = STEPCONFIG_MODE_HWSYNC |
-			STEPCONFIG_SAMPLES_AVG | STEPCONFIG_XPP;
-	switch (ts_dev->wires) {
-	case 4:
-		config |= STEPCONFIG_INP | STEPCONFIG_XNN;
-		break;
-	case 5:
-		config |= STEPCONFIG_YNN |
-				STEPCONFIG_INP_5 | STEPCONFIG_XNN |
-				STEPCONFIG_YPP;
-		break;
-	case 8:
-		config |= STEPCONFIG_INP | STEPCONFIG_XNN;
-		break;
-	}
-
-	for (i = 1; i < 7; i++) {
-		tscadc_writel(ts_dev, REG_STEPCONFIG(i), config);
-		tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
-	}
-
-	config = 0;
-	config = STEPCONFIG_MODE_HWSYNC |
-			STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YNN |
-			STEPCONFIG_INM | STEPCONFIG_FIFO1;
-	switch (ts_dev->wires) {
-	case 4:
-		config |= STEPCONFIG_YPP;
-		break;
-	case 5:
-		config |= STEPCONFIG_XPP | STEPCONFIG_INP_5 |
-				STEPCONFIG_XNP | STEPCONFIG_YPN;
-		break;
-	case 8:
-		config |= STEPCONFIG_YPP;
-		break;
-	}
-
-	for (i = 7; i < 13; i++) {
-		tscadc_writel(ts_dev, REG_STEPCONFIG(i), config);
-		tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
-	}
-
-	config = 0;
-	/* Charge step configuration */
-	config = STEPCONFIG_XPP | STEPCONFIG_YNN |
-			STEPCHARGE_RFP | STEPCHARGE_RFM |
-			STEPCHARGE_INM | STEPCHARGE_INP;
-
-	tscadc_writel(ts_dev, REG_CHARGECONFIG, config);
-	tscadc_writel(ts_dev, REG_CHARGEDELAY, STEPCHARGE_DELAY);
-
-	config = 0;
-	/* Configure to calculate pressure */
-	config = STEPCONFIG_MODE_HWSYNC |
-			STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YPP |
-			STEPCONFIG_XNN | STEPCONFIG_INM;
-	tscadc_writel(ts_dev, REG_STEPCONFIG13, config);
-	tscadc_writel(ts_dev, REG_STEPDELAY13, STEPCONFIG_OPENDLY);
-
-	config |= STEPCONFIG_Z1 | STEPCONFIG_FIFO1;
-	tscadc_writel(ts_dev, REG_STEPCONFIG14, config);
-	tscadc_writel(ts_dev, REG_STEPDELAY14, STEPCONFIG_OPENDLY);
-
-	tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB);
-}
-
-static void tscadc_idle_config(struct tscadc *ts_config)
-{
-	unsigned int idleconfig;
-
-	idleconfig = STEPCONFIG_YNN |
-			STEPCONFIG_INM |
-			STEPCONFIG_YPN | STEPIDLE_INP;
-	tscadc_writel(ts_config, REG_IDLECONFIG, idleconfig);
-}
-
-static void tscadc_read_coordinates(struct tscadc *ts_dev,
-				    unsigned int *x, unsigned int *y)
-{
-	unsigned int fifocount = tscadc_readl(ts_dev, REG_FIFO0CNT);
-	unsigned int prev_val_x = ~0, prev_val_y = ~0;
-	unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
-	unsigned int read, diff;
-	unsigned int i;
-
-	/*
-	 * Delta filter is used to remove large variations in sampled
-	 * values from ADC. The filter tries to predict where the next
-	 * coordinate could be. This is done by taking a previous
-	 * coordinate and subtracting it form current one. Further the
-	 * algorithm compares the difference with that of a present value,
-	 * if true the value is reported to the sub system.
-	 */
-	for (i = 0; i < fifocount - 1; i++) {
-		read = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff;
-		diff = abs(read - prev_val_x);
-		if (diff < prev_diff_x) {
-			prev_diff_x = diff;
-			*x = read;
-		}
-		prev_val_x = read;
-
-		read = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff;
-		diff = abs(read - prev_val_y);
-		if (diff < prev_diff_y) {
-			prev_diff_y = diff;
-			*y = read;
-		}
-		prev_val_y = read;
-	}
-}
-
-static irqreturn_t tscadc_irq(int irq, void *dev)
-{
-	struct tscadc *ts_dev = dev;
-	struct input_dev *input_dev = ts_dev->input;
-	unsigned int status, irqclr = 0;
-	unsigned int x = 0, y = 0;
-	unsigned int z1, z2, z;
-	unsigned int fsm;
-
-	status = tscadc_readl(ts_dev, REG_IRQSTATUS);
-	if (status & IRQENB_FIFO1THRES) {
-		tscadc_read_coordinates(ts_dev, &x, &y);
-
-		z1 = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff;
-		z2 = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff;
-
-		if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
-			/*
-			 * Calculate pressure using formula
-			 * Resistance(touch) = x plate resistance *
-			 * x postion/4096 * ((z2 / z1) - 1)
-			 */
-			z = z2 - z1;
-			z *= x;
-			z *= ts_dev->x_plate_resistance;
-			z /= z1;
-			z = (z + 2047) >> 12;
-
-			if (z <= MAX_12BIT) {
-				input_report_abs(input_dev, ABS_X, x);
-				input_report_abs(input_dev, ABS_Y, y);
-				input_report_abs(input_dev, ABS_PRESSURE, z);
-				input_report_key(input_dev, BTN_TOUCH, 1);
-				input_sync(input_dev);
-			}
-		}
-		irqclr |= IRQENB_FIFO1THRES;
-	}
-
-	/*
-	 * Time for sequencer to settle, to read
-	 * correct state of the sequencer.
-	 */
-	udelay(SEQ_SETTLE);
-
-	status = tscadc_readl(ts_dev, REG_RAWIRQSTATUS);
-	if (status & IRQENB_PENUP) {
-		/* Pen up event */
-		fsm = tscadc_readl(ts_dev, REG_ADCFSM);
-		if (fsm == ADCFSM_STEPID) {
-			ts_dev->pen_down = false;
-			input_report_key(input_dev, BTN_TOUCH, 0);
-			input_report_abs(input_dev, ABS_PRESSURE, 0);
-			input_sync(input_dev);
-		} else {
-			ts_dev->pen_down = true;
-		}
-		irqclr |= IRQENB_PENUP;
-	}
-
-	tscadc_writel(ts_dev, REG_IRQSTATUS, irqclr);
-	/* check pending interrupts */
-	tscadc_writel(ts_dev, REG_IRQEOI, 0x0);
-
-	tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB);
-	return IRQ_HANDLED;
-}
-
-/*
- * The functions for inserting/removing driver as a module.
- */
-
-static int tscadc_probe(struct platform_device *pdev)
-{
-	const struct tsc_data *pdata = pdev->dev.platform_data;
-	struct resource *res;
-	struct tscadc *ts_dev;
-	struct input_dev *input_dev;
-	struct clk *clk;
-	int err;
-	int clk_value, ctrl, irq;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "missing platform data.\n");
-		return -EINVAL;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "no memory resource defined.\n");
-		return -EINVAL;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev, "no irq ID is specified.\n");
-		return -EINVAL;
-	}
-
-	/* Allocate memory for device */
-	ts_dev = kzalloc(sizeof(struct tscadc), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ts_dev || !input_dev) {
-		dev_err(&pdev->dev, "failed to allocate memory.\n");
-		err = -ENOMEM;
-		goto err_free_mem;
-	}
-
-	ts_dev->input = input_dev;
-	ts_dev->irq = irq;
-	ts_dev->wires = pdata->wires;
-	ts_dev->x_plate_resistance = pdata->x_plate_resistance;
-
-	res = request_mem_region(res->start, resource_size(res), pdev->name);
-	if (!res) {
-		dev_err(&pdev->dev, "failed to reserve registers.\n");
-		err = -EBUSY;
-		goto err_free_mem;
-	}
-
-	ts_dev->tsc_base = ioremap(res->start, resource_size(res));
-	if (!ts_dev->tsc_base) {
-		dev_err(&pdev->dev, "failed to map registers.\n");
-		err = -ENOMEM;
-		goto err_release_mem_region;
-	}
-
-	err = request_irq(ts_dev->irq, tscadc_irq,
-			  0, pdev->dev.driver->name, ts_dev);
-	if (err) {
-		dev_err(&pdev->dev, "failed to allocate irq.\n");
-		goto err_unmap_regs;
-	}
-
-	ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick");
-	if (IS_ERR(ts_dev->tsc_ick)) {
-		dev_err(&pdev->dev, "failed to get TSC ick\n");
-		goto err_free_irq;
-	}
-	clk_enable(ts_dev->tsc_ick);
-
-	clk = clk_get(&pdev->dev, "adc_tsc_fck");
-	if (IS_ERR(clk)) {
-		dev_err(&pdev->dev, "failed to get TSC fck\n");
-		err = PTR_ERR(clk);
-		goto err_disable_clk;
-	}
-
-	clk_value = clk_get_rate(clk) / ADC_CLK;
-	clk_put(clk);
-
-	if (clk_value < 7) {
-		dev_err(&pdev->dev, "clock input less than min clock requirement\n");
-		goto err_disable_clk;
-	}
-	/* CLKDIV needs to be configured to the value minus 1 */
-	tscadc_writel(ts_dev, REG_CLKDIV, clk_value - 1);
-
-	 /* Enable wake-up of the SoC using touchscreen */
-	tscadc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
-
-	ctrl = CNTRLREG_STEPCONFIGWRT |
-			CNTRLREG_TSCENB |
-			CNTRLREG_STEPID;
-	switch (ts_dev->wires) {
-	case 4:
-		ctrl |= CNTRLREG_4WIRE;
-		break;
-	case 5:
-		ctrl |= CNTRLREG_5WIRE;
-		break;
-	case 8:
-		ctrl |= CNTRLREG_8WIRE;
-		break;
-	}
-	tscadc_writel(ts_dev, REG_CTRL, ctrl);
-
-	tscadc_idle_config(ts_dev);
-	tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO1THRES);
-	tscadc_step_config(ts_dev);
-	tscadc_writel(ts_dev, REG_FIFO1THR, 6);
-
-	ctrl |= CNTRLREG_TSCSSENB;
-	tscadc_writel(ts_dev, REG_CTRL, ctrl);
-
-	input_dev->name = "ti-tsc-adc";
-	input_dev->dev.parent = &pdev->dev;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-
-	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
-
-	/* register to the input system */
-	err = input_register_device(input_dev);
-	if (err)
-		goto err_disable_clk;
-
-	platform_set_drvdata(pdev, ts_dev);
-	return 0;
-
-err_disable_clk:
-	clk_disable(ts_dev->tsc_ick);
-	clk_put(ts_dev->tsc_ick);
-err_free_irq:
-	free_irq(ts_dev->irq, ts_dev);
-err_unmap_regs:
-	iounmap(ts_dev->tsc_base);
-err_release_mem_region:
-	release_mem_region(res->start, resource_size(res));
-err_free_mem:
-	input_free_device(input_dev);
-	kfree(ts_dev);
-	return err;
-}
-
-static int __devexit tscadc_remove(struct platform_device *pdev)
-{
-	struct tscadc *ts_dev = platform_get_drvdata(pdev);
-	struct resource *res;
-
-	free_irq(ts_dev->irq, ts_dev);
-
-	input_unregister_device(ts_dev->input);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	iounmap(ts_dev->tsc_base);
-	release_mem_region(res->start, resource_size(res));
-
-	clk_disable(ts_dev->tsc_ick);
-	clk_put(ts_dev->tsc_ick);
-
-	kfree(ts_dev);
-
-	platform_set_drvdata(pdev, NULL);
-	return 0;
-}
-
-static struct platform_driver ti_tsc_driver = {
-	.probe	= tscadc_probe,
-	.remove	= __devexit_p(tscadc_remove),
-	.driver	= {
-		.name   = "tsc",
-		.owner	= THIS_MODULE,
-	},
-};
-module_platform_driver(ti_tsc_driver);
-
-MODULE_DESCRIPTION("TI touchscreen controller driver");
-MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
-MODULE_LICENSE("GPL");