Input: move USB touchscreens under drivers/input/touchscreen

This will allow concentrating all input devices in one place
in {menu|x|q}config.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 905 insertions, 11 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 971618059a6..5e640aeb03c 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1,5 +1,5 @@
 #
-# Mouse driver configuration
+# Touchscreen driver configuration
 #
 menuconfig INPUT_TOUCHSCREEN
 	bool "Touchscreens"
@@ -44,9 +44,9 @@ config TOUCHSCREEN_BITSY
 config TOUCHSCREEN_CORGI
 	tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
 	depends on PXA_SHARPSL
-	default y	
+	default y
 	help
-	  Say Y here to enable the driver for the touchscreen on the 
+	  Say Y here to enable the driver for the touchscreen on the
 	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.
 
 	  If unsure, say N.
@@ -164,4 +164,58 @@ config TOUCHSCREEN_UCB1400
 	  To compile this driver as a module, choose M here: the
 	  module will be called ucb1400_ts.
 
+config TOUCHSCREEN_USB_COMPOSITE
+	tristate "USB Touchscreen Driver"
+	select USB
+	help
+	  USB Touchscreen driver for:
+	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
+	  - PanJit TouchSet USB
+	  - 3M MicroTouch USB (EX II series)
+	  - ITM
+	  - some other eTurboTouch
+	  - Gunze AHL61
+	  - DMC TSC-10/25
+
+	  Have a look at <http://linux.chapter7.ch/touchkit/> for
+	  a usage description and the required user-space stuff.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbtouchscreen.
+
+config TOUCHSCREEN_USB_EGALAX
+	default y
+	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_PANJIT
+	default y
+	bool "PanJit device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_3M
+	default y
+	bool "3M/Microtouch EX II series device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ITM
+	default y
+	bool "ITM device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ETURBO
+	default y
+	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_GUNZE
+	default y
+	bool "Gunze AHL61 device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_DMC_TSC10
+	default y
+	bool "DMC TSC-10/25 device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 30e6e2217a1..2f86d6ad06d 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -1,17 +1,18 @@
 #
-# Makefile for the mouse drivers.
+# Makefile for the touchscreen drivers.
 #
 
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
-obj-$(CONFIG_TOUCHSCREEN_BITSY)	+= h3600_ts_input.o
-obj-$(CONFIG_TOUCHSCREEN_CORGI)	+= corgi_ts.o
-obj-$(CONFIG_TOUCHSCREEN_GUNZE)	+= gunze.o
-obj-$(CONFIG_TOUCHSCREEN_ELO)	+= elo.o
-obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
-obj-$(CONFIG_TOUCHSCREEN_MK712)	+= mk712.o
-obj-$(CONFIG_TOUCHSCREEN_HP600)	+= hp680_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_BITSY)		+= h3600_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_CORGI)		+= corgi_ts.o
+obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
+obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
+obj-$(CONFIG_TOUCHSCREEN_MTOUCH)	+= mtouch.o
+obj-$(CONFIG_TOUCHSCREEN_MK712)		+= mk712.o
+obj-$(CONFIG_TOUCHSCREEN_HP600)		+= hp680_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)	+= usbtouchscreen.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
new file mode 100644
index 00000000000..8e18e6c6477
--- /dev/null
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -0,0 +1,839 @@
+/******************************************************************************
+ * usbtouchscreen.c
+ * Driver for USB Touchscreens, supporting those devices:
+ *  - eGalax Touchkit
+ *    includes eTurboTouch CT-410/510/700
+ *  - 3M/Microtouch  EX II series
+ *  - ITM
+ *  - PanJit TouchSet
+ *  - eTurboTouch
+ *  - Gunze AHL61
+ *  - DMC TSC-10/25
+ *
+ * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
+ * Copyright (C) by Todd E. Johnson (mtouchusb.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Driver is based on touchkitusb.c
+ * - ITM parts are from itmtouch.c
+ * - 3M parts are from mtouchusb.c
+ * - PanJit parts are from an unmerged driver by Lanslott Gish
+ * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
+ *   driver from Marius Vollmer
+ *
+ *****************************************************************************/
+
+//#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+
+
+#define DRIVER_VERSION		"v0.5"
+#define DRIVER_AUTHOR		"Daniel Ritz <daniel.ritz@gmx.ch>"
+#define DRIVER_DESC		"USB Touchscreen Driver"
+
+static int swap_xy;
+module_param(swap_xy, bool, 0644);
+MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+
+/* device specifc data/functions */
+struct usbtouch_usb;
+struct usbtouch_device_info {
+	int min_xc, max_xc;
+	int min_yc, max_yc;
+	int min_press, max_press;
+	int rept_size;
+	int flags;
+
+	void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
+	int  (*get_pkt_len) (unsigned char *pkt, int len);
+	int  (*read_data)   (struct usbtouch_usb *usbtouch, unsigned char *pkt);
+	int  (*init)        (struct usbtouch_usb *usbtouch);
+};
+
+#define USBTOUCH_FLG_BUFFER	0x01
+
+
+/* a usbtouch device */
+struct usbtouch_usb {
+	unsigned char *data;
+	dma_addr_t data_dma;
+	unsigned char *buffer;
+	int buf_len;
+	struct urb *irq;
+	struct usb_device *udev;
+	struct input_dev *input;
+	struct usbtouch_device_info *type;
+	char name[128];
+	char phys[64];
+
+	int x, y;
+	int touch, press;
+};
+
+
+#if defined(CONFIG_USB_TOUCHSCREEN_EGALAX) || defined(CONFIG_USB_TOUCHSCREEN_ETURBO)
+#define MULTI_PACKET
+#endif
+
+#ifdef MULTI_PACKET
+static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
+                                   unsigned char *pkt, int len);
+#endif
+
+/* device types */
+enum {
+	DEVTPYE_DUMMY = -1,
+	DEVTYPE_EGALAX,
+	DEVTYPE_PANJIT,
+	DEVTYPE_3M,
+	DEVTYPE_ITM,
+	DEVTYPE_ETURBO,
+	DEVTYPE_GUNZE,
+	DEVTYPE_DMC_TSC10,
+};
+
+static struct usb_device_id usbtouch_devices[] = {
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+	{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+	{USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+	{USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+	{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+	{USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+	{USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+	{USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
+#endif
+
+	{}
+};
+
+
+/*****************************************************************************
+ * eGalax part
+ */
+
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+
+#define EGALAX_PKT_TYPE_MASK		0xFE
+#define EGALAX_PKT_TYPE_REPT		0x80
+#define EGALAX_PKT_TYPE_DIAG		0x0A
+
+static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
+		return 0;
+
+	dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
+	dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+
+static int egalax_get_pkt_len(unsigned char *buf, int len)
+{
+	switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
+	case EGALAX_PKT_TYPE_REPT:
+		return 5;
+
+	case EGALAX_PKT_TYPE_DIAG:
+		if (len < 2)
+			return -1;
+
+		return buf[1] + 2;
+	}
+
+	return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * PanJit Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+	dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * 3M/Microtouch Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+
+#define MTOUCHUSB_ASYNC_REPORT          1
+#define MTOUCHUSB_RESET                 7
+#define MTOUCHUSB_REQ_CTRLLR_ID         10
+
+static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = (pkt[8] << 8) | pkt[7];
+	dev->y = (pkt[10] << 8) | pkt[9];
+	dev->touch = (pkt[2] & 0x40) ? 1 : 0;
+
+	return 1;
+}
+
+static int mtouch_init(struct usbtouch_usb *usbtouch)
+{
+	int ret, i;
+
+	ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+	                      MTOUCHUSB_RESET,
+	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
+	    __FUNCTION__, ret);
+	if (ret < 0)
+		return ret;
+	msleep(150);
+
+	for (i = 0; i < 3; i++) {
+		ret = usb_control_msg(usbtouch->udev, usb_rcvctrlpipe(usbtouch->udev, 0),
+				      MTOUCHUSB_ASYNC_REPORT,
+				      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				      1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
+		dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
+		    __FUNCTION__, ret);
+		if (ret >= 0)
+			break;
+		if (ret != -EPIPE)
+			return ret;
+	}
+
+	return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * ITM Part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	int touch;
+	/*
+	 * ITM devices report invalid x/y data if not touched.
+	 * if the screen was touched before but is not touched any more
+	 * report touch as 0 with the last valid x/y data once. then stop
+	 * reporting data until touched again.
+	 */
+	dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
+
+	touch = ~pkt[7] & 0x20;
+	if (!touch) {
+		if (dev->touch) {
+			dev->touch = 0;
+			return 1;
+		}
+
+		return 0;
+	}
+
+	dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
+	dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+	dev->touch = touch;
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * eTurboTouch part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	unsigned int shift;
+
+	/* packets should start with sync */
+	if (!(pkt[0] & 0x80))
+		return 0;
+
+	shift = (6 - (pkt[0] & 0x03));
+	dev->x = ((pkt[3] << 7) | pkt[4]) >> shift;
+	dev->y = ((pkt[1] << 7) | pkt[2]) >> shift;
+	dev->touch = (pkt[0] & 0x10) ? 1 : 0;
+
+	return 1;
+}
+
+static int eturbo_get_pkt_len(unsigned char *buf, int len)
+{
+	if (buf[0] & 0x80)
+		return 5;
+	if (buf[0] == 0x01)
+		return 3;
+	return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * Gunze part
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
+		return 0;
+
+	dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
+	dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
+	dev->touch = pkt[0] & 0x20;
+
+	return 1;
+}
+#endif
+
+/*****************************************************************************
+ * DMC TSC-10/25 Part
+ *
+ * Documentation about the controller and it's protocol can be found at
+ *   http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
+ *   http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+
+/* supported data rates. currently using 130 */
+#define TSC10_RATE_POINT	0x50
+#define TSC10_RATE_30		0x40
+#define TSC10_RATE_50		0x41
+#define TSC10_RATE_80		0x42
+#define TSC10_RATE_100		0x43
+#define TSC10_RATE_130		0x44
+#define TSC10_RATE_150		0x45
+
+/* commands */
+#define TSC10_CMD_RESET		0x55
+#define TSC10_CMD_RATE		0x05
+#define TSC10_CMD_DATA1		0x01
+
+static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
+{
+	struct usb_device *dev = usbtouch->udev;
+	int ret;
+	unsigned char buf[2];
+
+	/* reset */
+	buf[0] = buf[1] = 0xFF;
+	ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+	                      TSC10_CMD_RESET,
+	                      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+	if (ret < 0)
+		return ret;
+	if (buf[0] != 0x06 || buf[1] != 0x00)
+		return -ENODEV;
+
+	/* set coordinate output rate */
+	buf[0] = buf[1] = 0xFF;
+	ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+	                      TSC10_CMD_RATE,
+	                      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+	if (ret < 0)
+		return ret;
+	if (buf[0] != 0x06 || buf[1] != 0x00)
+		return -ENODEV;
+
+	/* start sending data */
+	ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+	                      TSC10_CMD_DATA1,
+	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+
+static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = ((pkt[2] & 0x03) << 8) | pkt[1];
+	dev->y = ((pkt[4] & 0x03) << 8) | pkt[3];
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * the different device descriptors
+ */
+static struct usbtouch_device_info usbtouch_dev_info[] = {
+#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+	[DEVTYPE_EGALAX] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x07ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x07ff,
+		.rept_size	= 16,
+		.flags		= USBTOUCH_FLG_BUFFER,
+		.process_pkt	= usbtouch_process_multi,
+		.get_pkt_len	= egalax_get_pkt_len,
+		.read_data	= egalax_read_data,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+	[DEVTYPE_PANJIT] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 8,
+		.read_data	= panjit_read_data,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_3M
+	[DEVTYPE_3M] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x4000,
+		.min_yc		= 0x0,
+		.max_yc		= 0x4000,
+		.rept_size	= 11,
+		.read_data	= mtouch_read_data,
+		.init		= mtouch_init,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+	[DEVTYPE_ITM] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.max_press	= 0xff,
+		.rept_size	= 8,
+		.read_data	= itm_read_data,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+	[DEVTYPE_ETURBO] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x07ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x07ff,
+		.rept_size	= 8,
+		.flags		= USBTOUCH_FLG_BUFFER,
+		.process_pkt	= usbtouch_process_multi,
+		.get_pkt_len	= eturbo_get_pkt_len,
+		.read_data	= eturbo_read_data,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+	[DEVTYPE_GUNZE] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 4,
+		.read_data	= gunze_read_data,
+	},
+#endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+	[DEVTYPE_DMC_TSC10] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x03ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x03ff,
+		.rept_size	= 5,
+		.init		= dmc_tsc10_init,
+		.read_data	= dmc_tsc10_read_data,
+	},
+#endif
+};
+
+
+/*****************************************************************************
+ * Generic Part
+ */
+static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
+                                 unsigned char *pkt, int len)
+{
+	struct usbtouch_device_info *type = usbtouch->type;
+
+	if (!type->read_data(usbtouch, pkt))
+			return;
+
+	input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch);
+
+	if (swap_xy) {
+		input_report_abs(usbtouch->input, ABS_X, usbtouch->y);
+		input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);
+	} else {
+		input_report_abs(usbtouch->input, ABS_X, usbtouch->x);
+		input_report_abs(usbtouch->input, ABS_Y, usbtouch->y);
+	}
+	if (type->max_press)
+		input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);
+	input_sync(usbtouch->input);
+}
+
+
+#ifdef MULTI_PACKET
+static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
+                                   unsigned char *pkt, int len)
+{
+	unsigned char *buffer;
+	int pkt_len, pos, buf_len, tmp;
+
+	/* process buffer */
+	if (unlikely(usbtouch->buf_len)) {
+		/* try to get size */
+		pkt_len = usbtouch->type->get_pkt_len(
+				usbtouch->buffer, usbtouch->buf_len);
+
+		/* drop? */
+		if (unlikely(!pkt_len))
+			goto out_flush_buf;
+
+		/* need to append -pkt_len bytes before able to get size */
+		if (unlikely(pkt_len < 0)) {
+			int append = -pkt_len;
+			if (unlikely(append > len))
+			       append = len;
+			if (usbtouch->buf_len + append >= usbtouch->type->rept_size)
+				goto out_flush_buf;
+			memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append);
+			usbtouch->buf_len += append;
+
+			pkt_len = usbtouch->type->get_pkt_len(
+					usbtouch->buffer, usbtouch->buf_len);
+			if (pkt_len < 0)
+				return;
+		}
+
+		/* append */
+		tmp = pkt_len - usbtouch->buf_len;
+		if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size)
+			goto out_flush_buf;
+		memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
+		usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len);
+
+		buffer = pkt + tmp;
+		buf_len = len - tmp;
+	} else {
+		buffer = pkt;
+		buf_len = len;
+	}
+
+	/* loop over the received packet, process */
+	pos = 0;
+	while (pos < buf_len) {
+		/* get packet len */
+		pkt_len = usbtouch->type->get_pkt_len(buffer + pos, len);
+
+		/* unknown packet: drop everything */
+		if (unlikely(!pkt_len))
+			goto out_flush_buf;
+
+		/* full packet: process */
+		if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) {
+			usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len);
+		} else {
+			/* incomplete packet: save in buffer */
+			memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
+			usbtouch->buf_len = buf_len - pos;
+			return;
+		}
+		pos += pkt_len;
+	}
+
+out_flush_buf:
+	usbtouch->buf_len = 0;
+	return;
+}
+#endif
+
+
+static void usbtouch_irq(struct urb *urb)
+{
+	struct usbtouch_usb *usbtouch = urb->context;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ETIME:
+		/* this urb is timing out */
+		dbg("%s - urb timed out - was the device unplugged?",
+		    __FUNCTION__);
+		return;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d",
+		    __FUNCTION__, urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d",
+		    __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length);
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		err("%s - usb_submit_urb failed with result: %d",
+		    __FUNCTION__, retval);
+}
+
+static int usbtouch_open(struct input_dev *input)
+{
+	struct usbtouch_usb *usbtouch = input_get_drvdata(input);
+
+	usbtouch->irq->dev = usbtouch->udev;
+
+	if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void usbtouch_close(struct input_dev *input)
+{
+	struct usbtouch_usb *usbtouch = input_get_drvdata(input);
+
+	usb_kill_urb(usbtouch->irq);
+}
+
+
+static void usbtouch_free_buffers(struct usb_device *udev,
+				  struct usbtouch_usb *usbtouch)
+{
+	usb_buffer_free(udev, usbtouch->type->rept_size,
+	                usbtouch->data, usbtouch->data_dma);
+	kfree(usbtouch->buffer);
+}
+
+
+static int usbtouch_probe(struct usb_interface *intf,
+			  const struct usb_device_id *id)
+{
+	struct usbtouch_usb *usbtouch;
+	struct input_dev *input_dev;
+	struct usb_host_interface *interface;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usbtouch_device_info *type;
+	int err = -ENOMEM;
+
+	interface = intf->cur_altsetting;
+	endpoint = &interface->endpoint[0].desc;
+
+	usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!usbtouch || !input_dev)
+		goto out_free;
+
+	type = &usbtouch_dev_info[id->driver_info];
+	usbtouch->type = type;
+	if (!type->process_pkt)
+		type->process_pkt = usbtouch_process_pkt;
+
+	usbtouch->data = usb_buffer_alloc(udev, type->rept_size,
+	                                  GFP_KERNEL, &usbtouch->data_dma);
+	if (!usbtouch->data)
+		goto out_free;
+
+	if (type->flags & USBTOUCH_FLG_BUFFER) {
+		usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL);
+		if (!usbtouch->buffer)
+			goto out_free_buffers;
+	}
+
+	usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!usbtouch->irq) {
+		dbg("%s - usb_alloc_urb failed: usbtouch->irq", __FUNCTION__);
+		goto out_free_buffers;
+	}
+
+	usbtouch->udev = udev;
+	usbtouch->input = input_dev;
+
+	if (udev->manufacturer)
+		strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
+
+	if (udev->product) {
+		if (udev->manufacturer)
+			strlcat(usbtouch->name, " ", sizeof(usbtouch->name));
+		strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name));
+	}
+
+	if (!strlen(usbtouch->name))
+		snprintf(usbtouch->name, sizeof(usbtouch->name),
+			"USB Touchscreen %04x:%04x",
+			 le16_to_cpu(udev->descriptor.idVendor),
+			 le16_to_cpu(udev->descriptor.idProduct));
+
+	usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys));
+	strlcpy(usbtouch->phys, "/input0", sizeof(usbtouch->phys));
+
+	input_dev->name = usbtouch->name;
+	input_dev->phys = usbtouch->phys;
+	usb_to_input_id(udev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, usbtouch);
+
+	input_dev->open = usbtouch_open;
+	input_dev->close = usbtouch_close;
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0);
+	if (type->max_press)
+		input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
+		                     type->max_press, 0, 0);
+
+	usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
+			 usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress),
+			 usbtouch->data, type->rept_size,
+			 usbtouch_irq, usbtouch, endpoint->bInterval);
+
+	usbtouch->irq->dev = usbtouch->udev;
+	usbtouch->irq->transfer_dma = usbtouch->data_dma;
+	usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* device specific init */
+	if (type->init) {
+		err = type->init(usbtouch);
+		if (err) {
+			dbg("%s - type->init() failed, err: %d", __FUNCTION__, err);
+			goto out_free_buffers;
+		}
+	}
+
+	err = input_register_device(usbtouch->input);
+	if (err) {
+		dbg("%s - input_register_device failed, err: %d", __FUNCTION__, err);
+		goto out_free_buffers;
+	}
+
+	usb_set_intfdata(intf, usbtouch);
+
+	return 0;
+
+out_free_buffers:
+	usbtouch_free_buffers(udev, usbtouch);
+out_free:
+	input_free_device(input_dev);
+	kfree(usbtouch);
+	return err;
+}
+
+static void usbtouch_disconnect(struct usb_interface *intf)
+{
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+
+	dbg("%s - called", __FUNCTION__);
+
+	if (!usbtouch)
+		return;
+
+	dbg("%s - usbtouch is initialized, cleaning up", __FUNCTION__);
+	usb_set_intfdata(intf, NULL);
+	usb_kill_urb(usbtouch->irq);
+	input_unregister_device(usbtouch->input);
+	usb_free_urb(usbtouch->irq);
+	usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
+	kfree(usbtouch);
+}
+
+MODULE_DEVICE_TABLE(usb, usbtouch_devices);
+
+static struct usb_driver usbtouch_driver = {
+	.name		= "usbtouchscreen",
+	.probe		= usbtouch_probe,
+	.disconnect	= usbtouch_disconnect,
+	.id_table	= usbtouch_devices,
+};
+
+static int __init usbtouch_init(void)
+{
+	return usb_register(&usbtouch_driver);
+}
+
+static void __exit usbtouch_cleanup(void)
+{
+	usb_deregister(&usbtouch_driver);
+}
+
+module_init(usbtouch_init);
+module_exit(usbtouch_cleanup);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("touchkitusb");
+MODULE_ALIAS("itmtouch");
+MODULE_ALIAS("mtouchusb");