Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6

93 files changed, 2267 insertions, 535 deletions

diff --git a/drivers/input/evbug.c b/drivers/input/evbug.c
index c21f2f12723..0353601ac3b 100644
--- a/drivers/input/evbug.c
+++ b/drivers/input/evbug.c
@@ -1,6 +1,4 @@
 /*
- * $Id: evbug.c,v 1.10 2001/09/25 10:12:07 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  */
 
@@ -41,7 +39,7 @@ MODULE_LICENSE("GPL");
 static void evbug_event(struct input_handle *handle, unsigned int type, unsigned int code, int value)
 {
 	printk(KERN_DEBUG "evbug.c: Event. Dev: %s, Type: %d, Code: %d, Value: %d\n",
-		handle->dev->phys, type, code, value);
+		handle->dev->dev.bus_id, type, code, value);
 }
 
 static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
@@ -66,7 +64,10 @@ static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
 	if (error)
 		goto err_unregister_handle;
 
-	printk(KERN_DEBUG "evbug.c: Connected device: \"%s\", %s\n", dev->name, dev->phys);
+	printk(KERN_DEBUG "evbug.c: Connected device: %s (%s at %s)\n",
+		dev->dev.bus_id,
+		dev->name ?: "unknown",
+		dev->phys ?: "unknown");
 
 	return 0;
 
@@ -79,7 +80,8 @@ static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
 
 static void evbug_disconnect(struct input_handle *handle)
 {
-	printk(KERN_DEBUG "evbug.c: Disconnected device: %s\n", handle->dev->phys);
+	printk(KERN_DEBUG "evbug.c: Disconnected device: %s\n",
+		handle->dev->dev.bus_id);
 
 	input_close_device(handle);
 	input_unregister_handle(handle);
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index b32984bc516..2d65411f676 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -300,6 +300,35 @@ struct input_event_compat {
 	__s32 value;
 };
 
+struct ff_periodic_effect_compat {
+	__u16 waveform;
+	__u16 period;
+	__s16 magnitude;
+	__s16 offset;
+	__u16 phase;
+
+	struct ff_envelope envelope;
+
+	__u32 custom_len;
+	compat_uptr_t custom_data;
+};
+
+struct ff_effect_compat {
+	__u16 type;
+	__s16 id;
+	__u16 direction;
+	struct ff_trigger trigger;
+	struct ff_replay replay;
+
+	union {
+		struct ff_constant_effect constant;
+		struct ff_ramp_effect ramp;
+		struct ff_periodic_effect_compat periodic;
+		struct ff_condition_effect condition[2]; /* One for each axis */
+		struct ff_rumble_effect rumble;
+	} u;
+};
+
 /* Note to the author of this code: did it ever occur to
    you why the ifdefs are needed? Think about it again. -AK */
 #ifdef CONFIG_X86_64
@@ -368,6 +397,42 @@ static int evdev_event_to_user(char __user *buffer,
 	return 0;
 }
 
+static int evdev_ff_effect_from_user(const char __user *buffer, size_t size,
+				     struct ff_effect *effect)
+{
+	if (COMPAT_TEST) {
+		struct ff_effect_compat *compat_effect;
+
+		if (size != sizeof(struct ff_effect_compat))
+			return -EINVAL;
+
+		/*
+		 * It so happens that the pointer which needs to be changed
+		 * is the last field in the structure, so we can copy the
+		 * whole thing and replace just the pointer.
+		 */
+
+		compat_effect = (struct ff_effect_compat *)effect;
+
+		if (copy_from_user(compat_effect, buffer,
+				   sizeof(struct ff_effect_compat)))
+			return -EFAULT;
+
+		if (compat_effect->type == FF_PERIODIC &&
+		    compat_effect->u.periodic.waveform == FF_CUSTOM)
+			effect->u.periodic.custom_data =
+				compat_ptr(compat_effect->u.periodic.custom_data);
+	} else {
+		if (size != sizeof(struct ff_effect))
+			return -EINVAL;
+
+		if (copy_from_user(effect, buffer, sizeof(struct ff_effect)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
 #else
 
 static inline size_t evdev_event_size(void)
@@ -393,6 +458,18 @@ static int evdev_event_to_user(char __user *buffer,
 	return 0;
 }
 
+static int evdev_ff_effect_from_user(const char __user *buffer, size_t size,
+				     struct ff_effect *effect)
+{
+	if (size != sizeof(struct ff_effect))
+		return -EINVAL;
+
+	if (copy_from_user(effect, buffer, sizeof(struct ff_effect)))
+		return -EFAULT;
+
+	return 0;
+}
+
 #endif /* CONFIG_COMPAT */
 
 static ssize_t evdev_write(struct file *file, const char __user *buffer,
@@ -633,17 +710,6 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 
 		return input_set_keycode(dev, t, v);
 
-	case EVIOCSFF:
-		if (copy_from_user(&effect, p, sizeof(effect)))
-			return -EFAULT;
-
-		error = input_ff_upload(dev, &effect, file);
-
-		if (put_user(effect.id, &(((struct ff_effect __user *)p)->id)))
-			return -EFAULT;
-
-		return error;
-
 	case EVIOCRMFF:
 		return input_ff_erase(dev, (int)(unsigned long) p, file);
 
@@ -733,6 +799,19 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 
 		if (_IOC_DIR(cmd) == _IOC_WRITE) {
 
+			if (_IOC_NR(cmd) == _IOC_NR(EVIOCSFF)) {
+
+				if (evdev_ff_effect_from_user(p, _IOC_SIZE(cmd), &effect))
+					return -EFAULT;
+
+				error = input_ff_upload(dev, &effect, file);
+
+				if (put_user(effect.id, &(((struct ff_effect __user *)p)->id)))
+					return -EFAULT;
+
+				return error;
+			}
+
 			if ((_IOC_NR(cmd) & ~ABS_MAX) == _IOC_NR(EVIOCSABS(0))) {
 
 				t = _IOC_NR(cmd) & ABS_MAX;
diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c
index d226d935b0d..6790e975a98 100644
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@@ -247,9 +247,9 @@ static void ml_combine_effects(struct ff_effect *effect,
 		 * in s8, this should be changed to something more generic
 		 */
 		effect->u.ramp.start_level =
-			max(min(effect->u.ramp.start_level + x, 0x7f), -0x80);
+			clamp_val(effect->u.ramp.start_level + x, -0x80, 0x7f);
 		effect->u.ramp.end_level =
-			max(min(effect->u.ramp.end_level + y, 0x7f), -0x80);
+			clamp_val(effect->u.ramp.end_level + y, -0x80, 0x7f);
 		break;
 
 	case FF_RUMBLE:
diff --git a/drivers/input/gameport/emu10k1-gp.c b/drivers/input/gameport/emu10k1-gp.c
index 9793ac36d17..b04930f7ea7 100644
--- a/drivers/input/gameport/emu10k1-gp.c
+++ b/drivers/input/gameport/emu10k1-gp.c
@@ -1,6 +1,4 @@
 /*
- * $Id: emu10k1-gp.c,v 1.8 2002/01/22 20:40:46 vojtech Exp $
- *
  *  Copyright (c) 2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index c5600ac5feb..078e4eed089 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -36,7 +36,6 @@ EXPORT_SYMBOL(__gameport_register_driver);
 EXPORT_SYMBOL(gameport_unregister_driver);
 EXPORT_SYMBOL(gameport_open);
 EXPORT_SYMBOL(gameport_close);
-EXPORT_SYMBOL(gameport_rescan);
 EXPORT_SYMBOL(gameport_set_phys);
 EXPORT_SYMBOL(gameport_start_polling);
 EXPORT_SYMBOL(gameport_stop_polling);
@@ -230,8 +229,6 @@ static void gameport_find_driver(struct gameport *gameport)
  */
 
 enum gameport_event_type {
-	GAMEPORT_RESCAN,
-	GAMEPORT_RECONNECT,
 	GAMEPORT_REGISTER_PORT,
 	GAMEPORT_REGISTER_DRIVER,
 };
@@ -365,15 +362,6 @@ static void gameport_handle_event(void)
 				gameport_add_port(event->object);
 				break;
 
-			case GAMEPORT_RECONNECT:
-				gameport_reconnect_port(event->object);
-				break;
-
-			case GAMEPORT_RESCAN:
-				gameport_disconnect_port(event->object);
-				gameport_find_driver(event->object);
-				break;
-
 			case GAMEPORT_REGISTER_DRIVER:
 				gameport_add_driver(event->object);
 				break;
@@ -651,16 +639,6 @@ static void gameport_disconnect_port(struct gameport *gameport)
 	device_release_driver(&gameport->dev);
 }
 
-void gameport_rescan(struct gameport *gameport)
-{
-	gameport_queue_event(gameport, NULL, GAMEPORT_RESCAN);
-}
-
-void gameport_reconnect(struct gameport *gameport)
-{
-	gameport_queue_event(gameport, NULL, GAMEPORT_RECONNECT);
-}
-
 /*
  * Submits register request to kgameportd for subsequent execution.
  * Note that port registration is always asynchronous.
diff --git a/drivers/input/gameport/lightning.c b/drivers/input/gameport/lightning.c
index 6b4d4561d46..06ad36ed348 100644
--- a/drivers/input/gameport/lightning.c
+++ b/drivers/input/gameport/lightning.c
@@ -1,6 +1,4 @@
 /*
- * $Id: lightning.c,v 1.20 2002/01/22 20:41:31 vojtech Exp $
- *
  *  Copyright (c) 1998-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/gameport/ns558.c b/drivers/input/gameport/ns558.c
index 7b7a546323c..2b282cde4b8 100644
--- a/drivers/input/gameport/ns558.c
+++ b/drivers/input/gameport/ns558.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ns558.c,v 1.43 2002/01/24 19:23:21 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  *  Copyright (c) 1999 Brian Gerst
  */
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 27006fc1830..c13ced3e0d3 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -21,6 +21,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/rcupdate.h>
+#include <linux/smp_lock.h>
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
 MODULE_DESCRIPTION("Input core");
@@ -241,7 +242,7 @@ static void input_handle_event(struct input_dev *dev,
 		break;
 	}
 
-	if (type != EV_SYN)
+	if (disposition != INPUT_IGNORE_EVENT && type != EV_SYN)
 		dev->sync = 0;
 
 	if ((disposition & INPUT_PASS_TO_DEVICE) && dev->event)
@@ -1588,13 +1589,17 @@ EXPORT_SYMBOL(input_unregister_handle);
 
 static int input_open_file(struct inode *inode, struct file *file)
 {
-	struct input_handler *handler = input_table[iminor(inode) >> 5];
+	struct input_handler *handler;
 	const struct file_operations *old_fops, *new_fops = NULL;
 	int err;
 
+	lock_kernel();
 	/* No load-on-demand here? */
-	if (!handler || !(new_fops = fops_get(handler->fops)))
-		return -ENODEV;
+	handler = input_table[iminor(inode) >> 5];
+	if (!handler || !(new_fops = fops_get(handler->fops))) {
+		err = -ENODEV;
+		goto out;
+	}
 
 	/*
 	 * That's _really_ odd. Usually NULL ->open means "nothing special",
@@ -1602,7 +1607,8 @@ static int input_open_file(struct inode *inode, struct file *file)
 	 */
 	if (!new_fops->open) {
 		fops_put(new_fops);
-		return -ENODEV;
+		err = -ENODEV;
+		goto out;
 	}
 	old_fops = file->f_op;
 	file->f_op = new_fops;
@@ -1614,6 +1620,8 @@ static int input_open_file(struct inode *inode, struct file *file)
 		file->f_op = fops_get(old_fops);
 	}
 	fops_put(old_fops);
+out:
+	unlock_kernel();
 	return err;
 }
 
diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c
index 52ba16f487c..92498d470b1 100644
--- a/drivers/input/joystick/a3d.c
+++ b/drivers/input/joystick/a3d.c
@@ -1,6 +1,4 @@
 /*
- * $Id: a3d.c,v 1.21 2002/01/22 20:11:50 vojtech Exp $
- *
  *  Copyright (c) 1998-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/joystick/amijoy.c b/drivers/input/joystick/amijoy.c
index deb9f825f92..05022f07ec7 100644
--- a/drivers/input/joystick/amijoy.c
+++ b/drivers/input/joystick/amijoy.c
@@ -1,6 +1,4 @@
 /*
- * $Id: amijoy.c,v 1.13 2002/01/22 20:26:32 vojtech Exp $
- *
  *  Copyright (c) 1998-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/joystick/cobra.c b/drivers/input/joystick/cobra.c
index 55646a6d89f..639b975a8ed 100644
--- a/drivers/input/joystick/cobra.c
+++ b/drivers/input/joystick/cobra.c
@@ -1,6 +1,4 @@
 /*
- * $Id: cobra.c,v 1.19 2002/01/22 20:26:52 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/joystick/db9.c b/drivers/input/joystick/db9.c
index 960e501c60c..52395948475 100644
--- a/drivers/input/joystick/db9.c
+++ b/drivers/input/joystick/db9.c
@@ -1,6 +1,4 @@
 /*
- * $Id: db9.c,v 1.13 2002/04/07 20:13:37 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  *
  *  Based on the work of:
diff --git a/drivers/input/joystick/gf2k.c b/drivers/input/joystick/gf2k.c
index 1f6302c0eb3..cb6eef1f2d9 100644
--- a/drivers/input/joystick/gf2k.c
+++ b/drivers/input/joystick/gf2k.c
@@ -1,6 +1,4 @@
 /*
- * $Id: gf2k.c,v 1.19 2002/01/22 20:27:43 vojtech Exp $
- *
  *  Copyright (c) 1998-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/joystick/grip.c b/drivers/input/joystick/grip.c
index fd3853ab1aa..684e07cfccc 100644
--- a/drivers/input/joystick/grip.c
+++ b/drivers/input/joystick/grip.c
@@ -1,6 +1,4 @@
 /*
- * $Id: grip.c,v 1.21 2002/01/22 20:27:57 vojtech Exp $
- *
  *  Copyright (c) 1998-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/joystick/grip_mp.c b/drivers/input/joystick/grip_mp.c
index c57e21d68c0..8279481b16e 100644
--- a/drivers/input/joystick/grip_mp.c
+++ b/drivers/input/joystick/grip_mp.c
@@ -1,6 +1,4 @@
 /*
- * $Id: grip_mp.c,v 1.9 2002/07/20 19:28:45 bonnland Exp $
- *
  *  Driver for the Gravis Grip Multiport, a gamepad "hub" that
  *  connects up to four 9-pin digital gamepads/joysticks.
  *  Driver tested on SMP and UP kernel versions 2.4.18-4 and 2.4.18-5.
diff --git a/drivers/input/joystick/guillemot.c b/drivers/input/joystick/guillemot.c
index aa6bfb3fb8c..25ec3fad9f2 100644
--- a/drivers/input/joystick/guillemot.c
+++ b/drivers/input/joystick/guillemot.c
@@ -1,6 +1,4 @@
 /*
- * $Id: guillemot.c,v 1.10 2002/01/22 20:28:12 vojtech Exp $
- *
  *  Copyright (c) 2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/joystick/iforce/iforce-ff.c b/drivers/input/joystick/iforce/iforce-ff.c
index f2a4381d0ab..7839b7b6fa9 100644
--- a/drivers/input/joystick/iforce/iforce-ff.c
+++ b/drivers/input/joystick/iforce/iforce-ff.c
@@ -1,6 +1,4 @@
 /*
- * $Id: iforce-ff.c,v 1.9 2002/02/02 19:28:35 jdeneux Exp $
- *
  *  Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
  *  Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com>
  *
diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c
index a2517fa72eb..61ee6e38739 100644
--- a/drivers/input/joystick/iforce/iforce-main.c
+++ b/drivers/input/joystick/iforce/iforce-main.c
@@ -1,6 +1,4 @@
 /*
- * $Id: iforce-main.c,v 1.19 2002/07/07 10:22:50 jdeneux Exp $
- *
  *  Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
  *  Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com>
  *
diff --git a/drivers/input/joystick/iforce/iforce-packets.c b/drivers/input/joystick/iforce/iforce-packets.c
index 45c4939ced7..015b50aa76f 100644
--- a/drivers/input/joystick/iforce/iforce-packets.c
+++ b/drivers/input/joystick/iforce/iforce-packets.c
@@ -1,6 +1,4 @@
 /*
- * $Id: iforce-packets.c,v 1.16 2002/07/07 10:22:50 jdeneux Exp $
- *
  *  Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
  *  Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com>
  *
diff --git a/drivers/input/joystick/iforce/iforce-serio.c b/drivers/input/joystick/iforce/iforce-serio.c
index 7b4bc19cef2..46d5041d2d9 100644
--- a/drivers/input/joystick/iforce/iforce-serio.c
+++ b/drivers/input/joystick/iforce/iforce-serio.c
@@ -1,6 +1,4 @@
 /*
- * $Id: iforce-serio.c,v 1.4 2002/01/28 22:45:00 jdeneux Exp $
- *
  *  Copyright (c) 2000-2001 Vojtech Pavlik <vojtech@ucw.cz>
  *  Copyright (c) 2001, 2007 Johann Deneux <johann.deneux@gmail.com>
  *
diff --git a/drivers/input/joystick/iforce/iforce-usb.c b/drivers/input/joystick/iforce/iforce-usb.c
index 7fb3cf81cfb..851cc4087c2 100644
--- a/drivers/input/joystick/iforce/iforce-usb.c
+++ b/drivers/input/joystick/iforce/iforce-usb.c
@@ -1,6 +1,4 @@
  /*
- * $Id: iforce-usb.c,v 1.16 2002/06/09 11:08:04 jdeneux Exp $
- *
  *  Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
  *  Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com>
  *
@@ -89,10 +87,10 @@ static void iforce_usb_irq(struct urb *urb)
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d",
-		    __FUNCTION__, urb->status);
+		    __func__, urb->status);
 		return;
 	default:
-		dbg("%s - urb has status of: %d", __FUNCTION__, urb->status);
+		dbg("%s - urb has status of: %d", __func__, urb->status);
 		goto exit;
 	}
 
@@ -103,7 +101,7 @@ exit:
 	status = usb_submit_urb (urb, GFP_ATOMIC);
 	if (status)
 		err ("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, status);
+		     __func__, status);
 }
 
 static void iforce_usb_out(struct urb *urb)
diff --git a/drivers/input/joystick/iforce/iforce.h b/drivers/input/joystick/iforce/iforce.h
index a964a7cfd21..f2d91f4028c 100644
--- a/drivers/input/joystick/iforce/iforce.h
+++ b/drivers/input/joystick/iforce/iforce.h
@@ -1,6 +1,4 @@
 /*
- * $Id: iforce.h,v 1.13 2002/07/07 10:22:50 jdeneux Exp $
- *
  *  Copyright (c) 2000-2002 Vojtech Pavlik <vojtech@ucw.cz>
  *  Copyright (c) 2001-2002, 2007 Johann Deneux <johann.deneux@gmail.com>
  *
diff --git a/drivers/input/joystick/interact.c b/drivers/input/joystick/interact.c
index bc8ea95dfd0..8c3290b6820 100644
--- a/drivers/input/joystick/interact.c
+++ b/drivers/input/joystick/interact.c
@@ -1,6 +1,4 @@
 /*
- * $Id: interact.c,v 1.16 2002/01/22 20:28:25 vojtech Exp $
- *
  *  Copyright (c) 2001 Vojtech Pavlik
  *
  *  Based on the work of:
diff --git a/drivers/input/joystick/joydump.c b/drivers/input/joystick/joydump.c
index 88ec5a918f2..2a1b82c8b31 100644
--- a/drivers/input/joystick/joydump.c
+++ b/drivers/input/joystick/joydump.c
@@ -1,6 +1,4 @@
 /*
- * $Id: joydump.c,v 1.1 2002/01/23 06:56:16 jsimmons Exp $
- *
  *  Copyright (c) 1996-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/joystick/magellan.c b/drivers/input/joystick/magellan.c
index 54e676948eb..40e40780747 100644
--- a/drivers/input/joystick/magellan.c
+++ b/drivers/input/joystick/magellan.c
@@ -1,6 +1,4 @@
 /*
- * $Id: magellan.c,v 1.16 2002/01/22 20:28:39 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/joystick/spaceball.c b/drivers/input/joystick/spaceball.c
index d4087fd4965..0cd9b29356a 100644
--- a/drivers/input/joystick/spaceball.c
+++ b/drivers/input/joystick/spaceball.c
@@ -1,6 +1,4 @@
 /*
- * $Id: spaceball.c,v 1.17 2002/01/22 20:29:03 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  *
  *  Based on the work of:
diff --git a/drivers/input/joystick/spaceorb.c b/drivers/input/joystick/spaceorb.c
index f7ce4004f4b..a694bf8e557 100644
--- a/drivers/input/joystick/spaceorb.c
+++ b/drivers/input/joystick/spaceorb.c
@@ -1,6 +1,4 @@
 /*
- * $Id: spaceorb.c,v 1.15 2002/01/22 20:29:19 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  *
  *  Based on the work of:
diff --git a/drivers/input/joystick/stinger.c b/drivers/input/joystick/stinger.c
index baa10b2f7ba..e0db9f5e4b4 100644
--- a/drivers/input/joystick/stinger.c
+++ b/drivers/input/joystick/stinger.c
@@ -1,6 +1,4 @@
 /*
- * $Id: stinger.c,v 1.10 2002/01/22 20:29:31 vojtech Exp $
- *
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  *  Copyright (c) 2000 Mark Fletcher
  */
diff --git a/drivers/input/joystick/tmdc.c b/drivers/input/joystick/tmdc.c
index 0feeb8acb53..60c37bcb938 100644
--- a/drivers/input/joystick/tmdc.c
+++ b/drivers/input/joystick/tmdc.c
@@ -1,6 +1,4 @@
 /*
- * $Id: tmdc.c,v 1.31 2002/01/22 20:29:52 vojtech Exp $
- *
  *  Copyright (c) 1998-2001 Vojtech Pavlik
  *
  *   Based on the work of:
diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
index 989483f5316..b6f85986954 100644
--- a/drivers/input/joystick/turbografx.c
+++ b/drivers/input/joystick/turbografx.c
@@ -1,6 +1,4 @@
 /*
- * $Id: turbografx.c,v 1.14 2002/01/22 20:30:39 vojtech Exp $
- *
  *  Copyright (c) 1998-2001 Vojtech Pavlik
  *
  *  Based on the work of:
diff --git a/drivers/input/joystick/twidjoy.c b/drivers/input/joystick/twidjoy.c
index 1085c841fec..3f4ec73c955 100644
--- a/drivers/input/joystick/twidjoy.c
+++ b/drivers/input/joystick/twidjoy.c
@@ -1,8 +1,4 @@
 /*
- * $Id: twidjoy.c,v 1.5 2002/01/22 20:31:53 vojtech Exp $
- *
- *  derived from CVS-ID "stinger.c,v 1.5 2001/05/29 12:57:18 vojtech Exp"
- *
  *  Copyright (c) 2001 Arndt Schoenewald
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  *  Copyright (c) 2000 Mark Fletcher
diff --git a/drivers/input/joystick/warrior.c b/drivers/input/joystick/warrior.c
index e928b6e3724..f72c83e15e6 100644
--- a/drivers/input/joystick/warrior.c
+++ b/drivers/input/joystick/warrior.c
@@ -1,6 +1,4 @@
 /*
- * $Id: warrior.c,v 1.14 2002/01/22 20:32:10 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index b29e3affb80..87d3e7eabff 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -418,11 +418,11 @@ static void xpad_irq_in(struct urb *urb)
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d",
-			__FUNCTION__, status);
+			__func__, status);
 		return;
 	default:
 		dbg("%s - nonzero urb status received: %d",
-			__FUNCTION__, status);
+			__func__, status);
 		goto exit;
 	}
 
@@ -441,7 +441,7 @@ exit:
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
 	if (retval)
 		err ("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, retval);
+		     __func__, retval);
 }
 
 static void xpad_bulk_out(struct urb *urb)
@@ -477,11 +477,11 @@ static void xpad_irq_out(struct urb *urb)
 		case -ESHUTDOWN:
 			/* this urb is terminated, clean up */
 			dbg("%s - urb shutting down with status: %d",
-				__FUNCTION__, status);
+				__func__, status);
 			return;
 		default:
 			dbg("%s - nonzero urb status received: %d",
-				__FUNCTION__, status);
+				__func__, status);
 			goto exit;
 	}
 
@@ -489,7 +489,7 @@ exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		err("%s - usb_submit_urb failed with result %d",
-		    __FUNCTION__, retval);
+		    __func__, retval);
 }
 
 static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
diff --git a/drivers/input/keyboard/amikbd.c b/drivers/input/keyboard/amikbd.c
index 81bf7562aca..35149ec455a 100644
--- a/drivers/input/keyboard/amikbd.c
+++ b/drivers/input/keyboard/amikbd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: amikbd.c,v 1.13 2002/02/01 16:02:24 vojtech Exp $
- *
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  *
  *  Based on the work of:
diff --git a/drivers/input/keyboard/atakbd.c b/drivers/input/keyboard/atakbd.c
index 4e92100c56a..1839194ea98 100644
--- a/drivers/input/keyboard/atakbd.c
+++ b/drivers/input/keyboard/atakbd.c
@@ -220,7 +220,7 @@ static int __init atakbd_init(void)
 	int i, error;
 
 	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ST_MFP))
-		return -EIO;
+		return -ENODEV;
 
 	// need to init core driver if not already done so
 	if (atari_keyb_init())
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index af58a6f1e89..b1ce10f50bc 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -68,7 +68,7 @@ MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and
  * are loadable via an userland utility.
  */
 
-static unsigned char atkbd_set2_keycode[512] = {
+static const unsigned short atkbd_set2_keycode[512] = {
 
 #ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES
 
@@ -99,7 +99,7 @@ static unsigned char atkbd_set2_keycode[512] = {
 #endif
 };
 
-static unsigned char atkbd_set3_keycode[512] = {
+static const unsigned short atkbd_set3_keycode[512] = {
 
 	  0,  0,  0,  0,  0,  0,  0, 59,  1,138,128,129,130, 15, 41, 60,
 	131, 29, 42, 86, 58, 16,  2, 61,133, 56, 44, 31, 30, 17,  3, 62,
@@ -115,7 +115,7 @@ static unsigned char atkbd_set3_keycode[512] = {
 	148,149,147,140
 };
 
-static unsigned char atkbd_unxlate_table[128] = {
+static const unsigned short atkbd_unxlate_table[128] = {
           0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13,
          21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27,
          35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42,
@@ -161,7 +161,7 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_SCR_LEFT		249
 #define ATKBD_SCR_RIGHT		248
 
-#define ATKBD_SPECIAL		248
+#define ATKBD_SPECIAL		ATKBD_SCR_RIGHT
 
 #define ATKBD_LED_EVENT_BIT	0
 #define ATKBD_REP_EVENT_BIT	1
@@ -173,7 +173,7 @@ static unsigned char atkbd_unxlate_table[128] = {
 #define ATKBD_XL_HANGEUL	0x10
 #define ATKBD_XL_HANJA		0x20
 
-static struct {
+static const struct {
 	unsigned char keycode;
 	unsigned char set2;
 } atkbd_scroll_keys[] = {
@@ -200,7 +200,7 @@ struct atkbd {
 	char phys[32];
 
 	unsigned short id;
-	unsigned char keycode[512];
+	unsigned short keycode[512];
 	DECLARE_BITMAP(force_release_mask, 512);
 	unsigned char set;
 	unsigned char translated;
@@ -357,7 +357,7 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data,
 	unsigned int code = data;
 	int scroll = 0, hscroll = 0, click = -1;
 	int value;
-	unsigned char keycode;
+	unsigned short keycode;
 
 #ifdef ATKBD_DEBUG
 	printk(KERN_DEBUG "atkbd.c: Received %02x flags %02x\n", data, flags);
@@ -851,6 +851,23 @@ static void atkbd_latitude_keymap_fixup(struct atkbd *atkbd)
 }
 
 /*
+ * Perform fixup for HP system that doesn't generate release
+ * for its video switch
+ */
+static void atkbd_hp_keymap_fixup(struct atkbd *atkbd)
+{
+	const unsigned int forced_release_keys[] = {
+		0x94,
+	};
+	int i;
+
+	if (atkbd->set == 2)
+		for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++)
+			__set_bit(forced_release_keys[i],
+					atkbd->force_release_mask);
+}
+
+/*
  * atkbd_set_keycode_table() initializes keyboard's keycode table
  * according to the selected scancode set
  */
@@ -961,16 +978,16 @@ static void atkbd_set_device_attrs(struct atkbd *atkbd)
 		input_dev->evbit[0] |= BIT_MASK(EV_REL);
 		input_dev->relbit[0] = BIT_MASK(REL_WHEEL) |
 			BIT_MASK(REL_HWHEEL);
-		set_bit(BTN_MIDDLE, input_dev->keybit);
+		__set_bit(BTN_MIDDLE, input_dev->keybit);
 	}
 
 	input_dev->keycode = atkbd->keycode;
-	input_dev->keycodesize = sizeof(unsigned char);
+	input_dev->keycodesize = sizeof(unsigned short);
 	input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode);
 
 	for (i = 0; i < 512; i++)
 		if (atkbd->keycode[i] && atkbd->keycode[i] < ATKBD_SPECIAL)
-			set_bit(atkbd->keycode[i], input_dev->keybit);
+			__set_bit(atkbd->keycode[i], input_dev->keybit);
 }
 
 /*
@@ -1452,6 +1469,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
 		.callback = atkbd_setup_fixup,
 		.driver_data = atkbd_latitude_keymap_fixup,
 	},
+	{
+		.ident = "HP 2133",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"),
+		},
+		.callback = atkbd_setup_fixup,
+		.driver_data = atkbd_hp_keymap_fixup,
+	},
 	{ }
 };
 
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index bbd00c3fe98..be58730e636 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -26,23 +26,54 @@
 
 #include <asm/gpio.h>
 
+struct gpio_button_data {
+	struct gpio_keys_button *button;
+	struct input_dev *input;
+	struct timer_list timer;
+};
+
+struct gpio_keys_drvdata {
+	struct input_dev *input;
+	struct gpio_button_data data[0];
+};
+
+static void gpio_keys_report_event(struct gpio_keys_button *button,
+				   struct input_dev *input)
+{
+	unsigned int type = button->type ?: EV_KEY;
+	int state = (gpio_get_value(button->gpio) ? 1 : 0) ^ button->active_low;
+
+	input_event(input, type, button->code, !!state);
+	input_sync(input);
+}
+
+static void gpio_check_button(unsigned long _data)
+{
+	struct gpio_button_data *data = (struct gpio_button_data *)_data;
+
+	gpio_keys_report_event(data->button, data->input);
+}
+
 static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 {
-	int i;
 	struct platform_device *pdev = dev_id;
 	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
-	struct input_dev *input = platform_get_drvdata(pdev);
+	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);
+	int i;
 
 	for (i = 0; i < pdata->nbuttons; i++) {
 		struct gpio_keys_button *button = &pdata->buttons[i];
-		int gpio = button->gpio;
 
-		if (irq == gpio_to_irq(gpio)) {
-			unsigned int type = button->type ?: EV_KEY;
-			int state = (gpio_get_value(gpio) ? 1 : 0) ^ button->active_low;
+		if (irq == gpio_to_irq(button->gpio)) {
+			struct gpio_button_data *bdata = &ddata->data[i];
+
+			if (button->debounce_interval)
+				mod_timer(&bdata->timer,
+					  jiffies +
+					  msecs_to_jiffies(button->debounce_interval));
+			else
+				gpio_keys_report_event(button, bdata->input);
 
-			input_event(input, type, button->code, !!state);
-			input_sync(input);
 			return IRQ_HANDLED;
 		}
 	}
@@ -53,17 +84,21 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 static int __devinit gpio_keys_probe(struct platform_device *pdev)
 {
 	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+	struct gpio_keys_drvdata *ddata;
 	struct input_dev *input;
 	int i, error;
 	int wakeup = 0;
 
+	ddata = kzalloc(sizeof(struct gpio_keys_drvdata) +
+			pdata->nbuttons * sizeof(struct gpio_button_data),
+			GFP_KERNEL);
 	input = input_allocate_device();
-	if (!input)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, input);
+	if (!ddata || !input) {
+		error = -ENOMEM;
+		goto fail1;
+	}
 
-	input->evbit[0] = BIT_MASK(EV_KEY);
+	platform_set_drvdata(pdev, ddata);
 
 	input->name = pdev->name;
 	input->phys = "gpio-keys/input0";
@@ -74,16 +109,23 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 	input->id.product = 0x0001;
 	input->id.version = 0x0100;
 
+	ddata->input = input;
+
 	for (i = 0; i < pdata->nbuttons; i++) {
 		struct gpio_keys_button *button = &pdata->buttons[i];
+		struct gpio_button_data *bdata = &ddata->data[i];
 		int irq;
 		unsigned int type = button->type ?: EV_KEY;
 
+		bdata->input = input;
+		setup_timer(&bdata->timer,
+			    gpio_check_button, (unsigned long)bdata);
+
 		error = gpio_request(button->gpio, button->desc ?: "gpio_keys");
 		if (error < 0) {
 			pr_err("gpio-keys: failed to request GPIO %d,"
 				" error %d\n", button->gpio, error);
-			goto fail;
+			goto fail2;
 		}
 
 		error = gpio_direction_input(button->gpio);
@@ -92,7 +134,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 				" direction for GPIO %d, error %d\n",
 				button->gpio, error);
 			gpio_free(button->gpio);
-			goto fail;
+			goto fail2;
 		}
 
 		irq = gpio_to_irq(button->gpio);
@@ -102,7 +144,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 				" for GPIO %d, error %d\n",
 				button->gpio, error);
 			gpio_free(button->gpio);
-			goto fail;
+			goto fail2;
 		}
 
 		error = request_irq(irq, gpio_keys_isr,
@@ -114,7 +156,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 			pr_err("gpio-keys: Unable to claim irq %d; error %d\n",
 				irq, error);
 			gpio_free(button->gpio);
-			goto fail;
+			goto fail2;
 		}
 
 		if (button->wakeup)
@@ -127,21 +169,25 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 	if (error) {
 		pr_err("gpio-keys: Unable to register input device, "
 			"error: %d\n", error);
-		goto fail;
+		goto fail2;
 	}
 
 	device_init_wakeup(&pdev->dev, wakeup);
 
 	return 0;
 
- fail:
+ fail2:
 	while (--i >= 0) {
 		free_irq(gpio_to_irq(pdata->buttons[i].gpio), pdev);
+		if (pdata->buttons[i].debounce_interval)
+			del_timer_sync(&ddata->data[i].timer);
 		gpio_free(pdata->buttons[i].gpio);
 	}
 
 	platform_set_drvdata(pdev, NULL);
+ fail1:
 	input_free_device(input);
+	kfree(ddata);
 
 	return error;
 }
@@ -149,7 +195,8 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 static int __devexit gpio_keys_remove(struct platform_device *pdev)
 {
 	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
-	struct input_dev *input = platform_get_drvdata(pdev);
+	struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);
+	struct input_dev *input = ddata->input;
 	int i;
 
 	device_init_wakeup(&pdev->dev, 0);
@@ -157,6 +204,8 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
 	for (i = 0; i < pdata->nbuttons; i++) {
 		int irq = gpio_to_irq(pdata->buttons[i].gpio);
 		free_irq(irq, pdev);
+		if (pdata->buttons[i].debounce_interval)
+			del_timer_sync(&ddata->data[i].timer);
 		gpio_free(pdata->buttons[i].gpio);
 	}
 
diff --git a/drivers/input/keyboard/lkkbd.c b/drivers/input/keyboard/lkkbd.c
index 32e2c2605d9..4730ef35c73 100644
--- a/drivers/input/keyboard/lkkbd.c
+++ b/drivers/input/keyboard/lkkbd.c
@@ -538,11 +538,11 @@ lkkbd_event (struct input_dev *dev, unsigned int type, unsigned int code,
 			switch (code) {
 				case SND_CLICK:
 					if (value == 0) {
-						DBG ("%s: Deactivating key clicks\n", __FUNCTION__);
+						DBG ("%s: Deactivating key clicks\n", __func__);
 						lk->serio->write (lk->serio, LK_CMD_DISABLE_KEYCLICK);
 						lk->serio->write (lk->serio, LK_CMD_DISABLE_CTRCLICK);
 					} else {
-						DBG ("%s: Activating key clicks\n", __FUNCTION__);
+						DBG ("%s: Activating key clicks\n", __func__);
 						lk->serio->write (lk->serio, LK_CMD_ENABLE_KEYCLICK);
 						lk->serio->write (lk->serio, volume_to_hw (lk->keyclick_volume));
 						lk->serio->write (lk->serio, LK_CMD_ENABLE_CTRCLICK);
@@ -560,7 +560,7 @@ lkkbd_event (struct input_dev *dev, unsigned int type, unsigned int code,
 
 		default:
 			printk (KERN_ERR "%s (): Got unknown type %d, code %d, value %d\n",
-					__FUNCTION__, type, code, value);
+					__func__, type, code, value);
 	}
 
 	return -1;
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 45767e73f07..6f1516f5075 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -105,6 +105,8 @@ struct pxa27x_keypad {
 	struct input_dev *input_dev;
 	void __iomem *mmio_base;
 
+	int irq;
+
 	/* matrix key code map */
 	unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM];
 
@@ -392,6 +394,10 @@ static int pxa27x_keypad_suspend(struct platform_device *pdev, pm_message_t stat
 	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
 
 	clk_disable(keypad->clk);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(keypad->irq);
+
 	return 0;
 }
 
@@ -400,6 +406,9 @@ static int pxa27x_keypad_resume(struct platform_device *pdev)
 	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
 	struct input_dev *input_dev = keypad->input_dev;
 
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(keypad->irq);
+
 	mutex_lock(&input_dev->mutex);
 
 	if (input_dev->users) {
@@ -509,6 +518,8 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev)
 		goto failed_free_dev;
 	}
 
+	keypad->irq = irq;
+
 	/* Register the input device */
 	error = input_register_device(input_dev);
 	if (error) {
@@ -516,6 +527,8 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev)
 		goto failed_free_irq;
 	}
 
+	device_init_wakeup(&pdev->dev, 1);
+
 	return 0;
 
 failed_free_irq:
@@ -539,7 +552,7 @@ static int __devexit pxa27x_keypad_remove(struct platform_device *pdev)
 	struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
 	struct resource *res;
 
-	free_irq(platform_get_irq(pdev, 0), pdev);
+	free_irq(keypad->irq, pdev);
 
 	clk_disable(keypad->clk);
 	clk_put(keypad->clk);
diff --git a/drivers/input/keyboard/sunkbd.c b/drivers/input/keyboard/sunkbd.c
index be0f5d19d02..9fce6d1e29b 100644
--- a/drivers/input/keyboard/sunkbd.c
+++ b/drivers/input/keyboard/sunkbd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: sunkbd.c,v 1.14 2001/09/25 10:12:07 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c
index 94e444b4ee1..b12b7ee4b6a 100644
--- a/drivers/input/keyboard/tosakbd.c
+++ b/drivers/input/keyboard/tosakbd.c
@@ -215,8 +215,6 @@ static int tosakbd_suspend(struct platform_device *dev, pm_message_t state)
 	unsigned long flags;
 
 	spin_lock_irqsave(&tosakbd->lock, flags);
-	PGSR1 = (PGSR1 & ~TOSA_GPIO_LOW_STROBE_BIT);
-	PGSR2 = (PGSR2 & ~TOSA_GPIO_HIGH_STROBE_BIT);
 	tosakbd->suspended = 1;
 	spin_unlock_irqrestore(&tosakbd->lock, flags);
 
diff --git a/drivers/input/keyboard/xtkbd.c b/drivers/input/keyboard/xtkbd.c
index 152a2c07050..37b01d777a4 100644
--- a/drivers/input/keyboard/xtkbd.c
+++ b/drivers/input/keyboard/xtkbd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: xtkbd.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 432699d61c5..e99b7882f38 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -189,6 +189,16 @@ config INPUT_UINPUT
 	  To compile this driver as a module, choose M here: the
 	  module will be called uinput.
 
+config INPUT_SGI_BTNS
+	tristate "SGI Indy/O2 volume button interface"
+	depends on SGI_IP22 || SGI_IP32
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you want to support SGI Indy/O2 volume button interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sgi_btns.
+
 config HP_SDC_RTC
 	tristate "HP SDC Real Time Clock"
 	depends on GSC || HP300
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index ebd39f291d2..f48009b5222 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -19,3 +19,4 @@ obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
+obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
diff --git a/drivers/input/misc/ati_remote.c b/drivers/input/misc/ati_remote.c
index f3b86c2b079..debfc1af9d9 100644
--- a/drivers/input/misc/ati_remote.c
+++ b/drivers/input/misc/ati_remote.c
@@ -330,7 +330,7 @@ static int ati_remote_open(struct input_dev *inputdev)
 	ati_remote->irq_urb->dev = ati_remote->udev;
 	if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) {
 		dev_err(&ati_remote->interface->dev,
-			"%s: usb_submit_urb failed!\n", __FUNCTION__);
+			"%s: usb_submit_urb failed!\n", __func__);
 		return -EIO;
 	}
 
@@ -356,7 +356,7 @@ static void ati_remote_irq_out(struct urb *urb)
 
 	if (urb->status) {
 		dev_dbg(&ati_remote->interface->dev, "%s: status %d\n",
-			__FUNCTION__, urb->status);
+			__func__, urb->status);
 		return;
 	}
 
@@ -601,17 +601,17 @@ static void ati_remote_irq_in(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		dev_dbg(&ati_remote->interface->dev, "%s: urb error status, unlink? \n",
-			__FUNCTION__);
+			__func__);
 		return;
 	default:		/* error */
 		dev_dbg(&ati_remote->interface->dev, "%s: Nonzero urb status %d\n",
-			__FUNCTION__, urb->status);
+			__func__, urb->status);
 	}
 
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		dev_err(&ati_remote->interface->dev, "%s: usb_submit_urb()=%d\n",
-			__FUNCTION__, retval);
+			__func__, retval);
 }
 
 /*
@@ -734,7 +734,7 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
 	int err = -ENOMEM;
 
 	if (iface_host->desc.bNumEndpoints != 2) {
-		err("%s: Unexpected desc.bNumEndpoints\n", __FUNCTION__);
+		err("%s: Unexpected desc.bNumEndpoints\n", __func__);
 		return -ENODEV;
 	}
 
@@ -742,11 +742,11 @@ static int ati_remote_probe(struct usb_interface *interface, const struct usb_de
 	endpoint_out = &iface_host->endpoint[1].desc;
 
 	if (!usb_endpoint_is_int_in(endpoint_in)) {
-		err("%s: Unexpected endpoint_in\n", __FUNCTION__);
+		err("%s: Unexpected endpoint_in\n", __func__);
 		return -ENODEV;
 	}
 	if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) {
-		err("%s: endpoint_in message size==0? \n", __FUNCTION__);
+		err("%s: endpoint_in message size==0? \n", __func__);
 		return -ENODEV;
 	}
 
@@ -814,7 +814,7 @@ static void ati_remote_disconnect(struct usb_interface *interface)
 	ati_remote = usb_get_intfdata(interface);
 	usb_set_intfdata(interface, NULL);
 	if (!ati_remote) {
-		warn("%s - null device?\n", __FUNCTION__);
+		warn("%s - null device?\n", __func__);
 		return;
 	}
 
diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c
index f2709b82485..a7fabafbd94 100644
--- a/drivers/input/misc/ati_remote2.c
+++ b/drivers/input/misc/ati_remote2.c
@@ -137,14 +137,14 @@ static int ati_remote2_open(struct input_dev *idev)
 	r = usb_submit_urb(ar2->urb[0], GFP_KERNEL);
 	if (r) {
 		dev_err(&ar2->intf[0]->dev,
-			"%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
+			"%s: usb_submit_urb() = %d\n", __func__, r);
 		return r;
 	}
 	r = usb_submit_urb(ar2->urb[1], GFP_KERNEL);
 	if (r) {
 		usb_kill_urb(ar2->urb[0]);
 		dev_err(&ar2->intf[1]->dev,
-			"%s: usb_submit_urb() = %d\n", __FUNCTION__, r);
+			"%s: usb_submit_urb() = %d\n", __func__, r);
 		return r;
 	}
 
@@ -294,17 +294,17 @@ static void ati_remote2_complete_mouse(struct urb *urb)
 	case -ECONNRESET:
 	case -ESHUTDOWN:
 		dev_dbg(&ar2->intf[0]->dev,
-			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
+			"%s(): urb status = %d\n", __func__, urb->status);
 		return;
 	default:
 		dev_err(&ar2->intf[0]->dev,
-			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
+			"%s(): urb status = %d\n", __func__, urb->status);
 	}
 
 	r = usb_submit_urb(urb, GFP_ATOMIC);
 	if (r)
 		dev_err(&ar2->intf[0]->dev,
-			"%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
+			"%s(): usb_submit_urb() = %d\n", __func__, r);
 }
 
 static void ati_remote2_complete_key(struct urb *urb)
@@ -321,17 +321,17 @@ static void ati_remote2_complete_key(struct urb *urb)
 	case -ECONNRESET:
 	case -ESHUTDOWN:
 		dev_dbg(&ar2->intf[1]->dev,
-			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
+			"%s(): urb status = %d\n", __func__, urb->status);
 		return;
 	default:
 		dev_err(&ar2->intf[1]->dev,
-			"%s(): urb status = %d\n", __FUNCTION__, urb->status);
+			"%s(): urb status = %d\n", __func__, urb->status);
 	}
 
 	r = usb_submit_urb(urb, GFP_ATOMIC);
 	if (r)
 		dev_err(&ar2->intf[1]->dev,
-			"%s(): usb_submit_urb() = %d\n", __FUNCTION__, r);
+			"%s(): usb_submit_urb() = %d\n", __func__, r);
 }
 
 static int ati_remote2_input_init(struct ati_remote2 *ar2)
@@ -438,7 +438,7 @@ static int ati_remote2_setup(struct ati_remote2 *ar2)
 			    channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 	if (r) {
 		dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n",
-			__FUNCTION__, r);
+			__func__, r);
 		return r;
 	}
 
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index 45e5d05b01d..49d8abfe38f 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -35,6 +35,7 @@
 
 #include <linux/hp_sdc.h>
 #include <linux/errno.h>
+#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/module.h>
@@ -408,6 +409,7 @@ static unsigned int hp_sdc_rtc_poll(struct file *file, poll_table *wait)
 
 static int hp_sdc_rtc_open(struct inode *inode, struct file *file)
 {
+	cycle_kernel_lock();
         return 0;
 }
 
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index 952938a8e99..86afdd1fdf9 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -159,7 +159,7 @@ static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
 	if (dev->data.pos >= dev->data.len) {
 		dev_dbg(&dev->udev->dev,
 			"%s - Error ran out of data. pos: %d, len: %d\n",
-			__FUNCTION__, dev->data.pos, dev->data.len);
+			__func__, dev->data.pos, dev->data.len);
 		return -1;
 	}
 
@@ -267,7 +267,7 @@ static void keyspan_check_data(struct usb_keyspan *remote)
 				remote->data.tester = remote->data.tester >> 6;
 				remote->data.bits_left -= 6;
 			} else {
-				err("%s - Unknown sequence found in system data.\n", __FUNCTION__);
+				err("%s - Unknown sequence found in system data.\n", __func__);
 				remote->stage = 0;
 				return;
 			}
@@ -286,7 +286,7 @@ static void keyspan_check_data(struct usb_keyspan *remote)
 				remote->data.tester = remote->data.tester >> 6;
 				remote->data.bits_left -= 6;
 			} else {
-				err("%s - Unknown sequence found in button data.\n", __FUNCTION__);
+				err("%s - Unknown sequence found in button data.\n", __func__);
 				remote->stage = 0;
 				return;
 			}
@@ -302,7 +302,7 @@ static void keyspan_check_data(struct usb_keyspan *remote)
 			remote->data.tester = remote->data.tester >> 6;
 			remote->data.bits_left -= 6;
 		} else {
-			err("%s - Error in message, invalid toggle.\n", __FUNCTION__);
+			err("%s - Error in message, invalid toggle.\n", __func__);
 			remote->stage = 0;
 			return;
 		}
@@ -317,7 +317,7 @@ static void keyspan_check_data(struct usb_keyspan *remote)
 
 		dev_dbg(&remote->udev->dev,
 			"%s found valid message: system: %d, button: %d, toggle: %d\n",
-			__FUNCTION__, message.system, message.button, message.toggle);
+			__func__, message.system, message.button, message.toggle);
 
 		if (message.toggle != remote->toggle) {
 			keyspan_report_button(remote, message.button, 1);
@@ -341,7 +341,7 @@ static int keyspan_setup(struct usb_device* dev)
 				 0x11, 0x40, 0x5601, 0x0, NULL, 0, 0);
 	if (retval) {
 		dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
-			__FUNCTION__, retval);
+			__func__, retval);
 		return(retval);
 	}
 
@@ -349,7 +349,7 @@ static int keyspan_setup(struct usb_device* dev)
 				 0x44, 0x40, 0x0, 0x0, NULL, 0, 0);
 	if (retval) {
 		dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
-			__FUNCTION__, retval);
+			__func__, retval);
 		return(retval);
 	}
 
@@ -357,11 +357,11 @@ static int keyspan_setup(struct usb_device* dev)
 				 0x22, 0x40, 0x0, 0x0, NULL, 0, 0);
 	if (retval) {
 		dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
-			__FUNCTION__, retval);
+			__func__, retval);
 		return(retval);
 	}
 
-	dev_dbg(&dev->dev, "%s - Setup complete.\n", __FUNCTION__);
+	dev_dbg(&dev->dev, "%s - Setup complete.\n", __func__);
 	return(retval);
 }
 
@@ -397,7 +397,7 @@ static void keyspan_irq_recv(struct urb *urb)
 resubmit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err ("%s - usb_submit_urb failed with result: %d", __FUNCTION__, retval);
+		err ("%s - usb_submit_urb failed with result: %d", __func__, retval);
 }
 
 static int keyspan_open(struct input_dev *dev)
diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c
index 7a7b8c7b963..a53c4885fba 100644
--- a/drivers/input/misc/powermate.c
+++ b/drivers/input/misc/powermate.c
@@ -96,10 +96,10 @@ static void powermate_irq(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
 		goto exit;
 	}
 
@@ -112,7 +112,7 @@ exit:
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
 	if (retval)
 		err ("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, retval);
+		     __func__, retval);
 }
 
 /* Decide if we need to issue a control message and do so. Must be called with pm->lock taken */
diff --git a/drivers/input/misc/sgi_btns.c b/drivers/input/misc/sgi_btns.c
new file mode 100644
index 00000000000..ce238f59b3c
--- /dev/null
+++ b/drivers/input/misc/sgi_btns.c
@@ -0,0 +1,178 @@
+/*
+ *  SGI Volume Button interface driver
+ *
+ *  Copyright (C) 2008  Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/init.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_SGI_IP22
+#include <asm/sgi/ioc.h>
+
+static inline u8 button_status(void)
+{
+	u8 status;
+
+	status = readb(&sgioc->panel) ^ 0xa0;
+	return ((status & 0x80) >> 6) | ((status & 0x20) >> 5);
+}
+#endif
+
+#ifdef CONFIG_SGI_IP32
+#include <asm/ip32/mace.h>
+
+static inline u8 button_status(void)
+{
+	u64 status;
+
+	status = readq(&mace->perif.audio.control);
+	writeq(status & ~(3U << 23), &mace->perif.audio.control);
+
+	return (status >> 23) & 3;
+}
+#endif
+
+#define BUTTONS_POLL_INTERVAL	30	/* msec */
+#define BUTTONS_COUNT_THRESHOLD	3
+
+static const unsigned short sgi_map[] = {
+	KEY_VOLUMEDOWN,
+	KEY_VOLUMEUP
+};
+
+struct buttons_dev {
+	struct input_polled_dev *poll_dev;
+	unsigned short keymap[ARRAY_SIZE(sgi_map)];
+	int count[ARRAY_SIZE(sgi_map)];
+};
+
+static void handle_buttons(struct input_polled_dev *dev)
+{
+	struct buttons_dev *bdev = dev->private;
+	struct input_dev *input = dev->input;
+	u8 status;
+	int i;
+
+	status = button_status();
+
+	for (i = 0; i < ARRAY_SIZE(bdev->keymap); i++) {
+		if (status & (1U << i)) {
+			if (++bdev->count[i] == BUTTONS_COUNT_THRESHOLD) {
+				input_event(input, EV_MSC, MSC_SCAN, i);
+				input_report_key(input, bdev->keymap[i], 1);
+				input_sync(input);
+			}
+		} else {
+			if (bdev->count[i] >= BUTTONS_COUNT_THRESHOLD) {
+				input_event(input, EV_MSC, MSC_SCAN, i);
+				input_report_key(input, bdev->keymap[i], 0);
+				input_sync(input);
+			}
+			bdev->count[i] = 0;
+		}
+	}
+}
+
+static int __devinit sgi_buttons_probe(struct platform_device *pdev)
+{
+	struct buttons_dev *bdev;
+	struct input_polled_dev *poll_dev;
+	struct input_dev *input;
+	int error, i;
+
+	bdev = kzalloc(sizeof(struct buttons_dev), GFP_KERNEL);
+	poll_dev = input_allocate_polled_device();
+	if (!bdev || !poll_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	memcpy(bdev->keymap, sgi_map, sizeof(bdev->keymap));
+
+	poll_dev->private = bdev;
+	poll_dev->poll = handle_buttons;
+	poll_dev->poll_interval = BUTTONS_POLL_INTERVAL;
+
+	input = poll_dev->input;
+	input->name = "SGI buttons";
+	input->phys = "sgi/input0";
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = &pdev->dev;
+
+	input->keycode = bdev->keymap;
+	input->keycodemax = ARRAY_SIZE(bdev->keymap);
+	input->keycodesize = sizeof(unsigned short);
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+	__set_bit(EV_KEY, input->evbit);
+	for (i = 0; i < ARRAY_SIZE(sgi_map); i++)
+		__set_bit(bdev->keymap[i], input->keybit);
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	bdev->poll_dev = poll_dev;
+	dev_set_drvdata(&pdev->dev, bdev);
+
+	error = input_register_polled_device(poll_dev);
+	if (error)
+		goto err_free_mem;
+
+	return 0;
+
+ err_free_mem:
+	input_free_polled_device(poll_dev);
+	kfree(bdev);
+	dev_set_drvdata(&pdev->dev, NULL);
+	return error;
+}
+
+static int __devexit sgi_buttons_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct buttons_dev *bdev = dev_get_drvdata(dev);
+
+	input_unregister_polled_device(bdev->poll_dev);
+	input_free_polled_device(bdev->poll_dev);
+	kfree(bdev);
+	dev_set_drvdata(dev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver sgi_buttons_driver = {
+	.probe	= sgi_buttons_probe,
+	.remove	= __devexit_p(sgi_buttons_remove),
+	.driver	= {
+		.name	= "sgibtns",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init sgi_buttons_init(void)
+{
+	return platform_driver_register(&sgi_buttons_driver);
+}
+
+static void __exit sgi_buttons_exit(void)
+{
+	platform_driver_unregister(&sgi_buttons_driver);
+}
+
+module_init(sgi_buttons_init);
+module_exit(sgi_buttons_exit);
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index a56ad4ba8fe..2bcfa0b3506 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -37,6 +37,7 @@
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
+#include <linux/smp_lock.h>
 
 static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
@@ -222,6 +223,7 @@ static int uinput_open(struct inode *inode, struct file *file)
 	if (!newdev)
 		return -ENOMEM;
 
+	lock_kernel();
 	mutex_init(&newdev->mutex);
 	spin_lock_init(&newdev->requests_lock);
 	init_waitqueue_head(&newdev->requests_waitq);
@@ -229,6 +231,7 @@ static int uinput_open(struct inode *inode, struct file *file)
 	newdev->state = UIST_NEW_DEVICE;
 
 	file->private_data = newdev;
+	unlock_kernel();
 
 	return 0;
 }
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 72176f3d49c..fe268be3293 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -1186,7 +1186,7 @@ static int wistron_setkeycode(struct input_dev *dev, int scancode, int keycode)
 
 static int __devinit setup_input_dev(void)
 {
-	const struct key_entry *key;
+	struct key_entry *key;
 	struct input_dev *input_dev;
 	int error;
 
@@ -1219,6 +1219,23 @@ static int __devinit setup_input_dev(void)
 				set_bit(key->sw.code, input_dev->swbit);
 				break;
 
+			/* if wifi or bluetooth are not available, create normal keys */
+			case KE_WIFI:
+				if (!have_wifi) {
+					key->type = KE_KEY;
+					key->keycode = KEY_WLAN;
+					key--;
+				}
+				break;
+
+			case KE_BLUETOOTH:
+				if (!have_bluetooth) {
+					key->type = KE_KEY;
+					key->keycode = KEY_BLUETOOTH;
+					key--;
+				}
+				break;
+
 			default:
 				break;
 		}
diff --git a/drivers/input/misc/yealink.c b/drivers/input/misc/yealink.c
index 46279ef2b64..facefd3dba2 100644
--- a/drivers/input/misc/yealink.c
+++ b/drivers/input/misc/yealink.c
@@ -119,6 +119,8 @@ struct yealink_dev {
 	u8 lcdMap[ARRAY_SIZE(lcdMap)];	/* state of LCD, LED ... */
 	int key_code;			/* last reported key	 */
 
+	unsigned int shutdown:1;
+
 	int	stat_ix;
 	union {
 		struct yld_status s;
@@ -424,10 +426,10 @@ send_update:
 static void urb_irq_callback(struct urb *urb)
 {
 	struct yealink_dev *yld = urb->context;
-	int ret;
+	int ret, status = urb->status;
 
-	if (urb->status)
-		err("%s - urb status %d", __FUNCTION__, urb->status);
+	if (status)
+		err("%s - urb status %d", __func__, status);
 
 	switch (yld->irq_data->cmd) {
 	case CMD_KEYPRESS:
@@ -447,33 +449,38 @@ static void urb_irq_callback(struct urb *urb)
 
 	yealink_do_idle_tasks(yld);
 
-	ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
-	if (ret)
-		err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
+	if (!yld->shutdown) {
+		ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
+		if (ret && ret != -EPERM)
+			err("%s - usb_submit_urb failed %d", __func__, ret);
+	}
 }
 
 static void urb_ctl_callback(struct urb *urb)
 {
 	struct yealink_dev *yld = urb->context;
-	int ret;
+	int ret = 0, status = urb->status;
 
-	if (urb->status)
-		err("%s - urb status %d", __FUNCTION__, urb->status);
+	if (status)
+		err("%s - urb status %d", __func__, status);
 
 	switch (yld->ctl_data->cmd) {
 	case CMD_KEYPRESS:
 	case CMD_SCANCODE:
 		/* ask for a response */
-		ret = usb_submit_urb(yld->urb_irq, GFP_ATOMIC);
+		if (!yld->shutdown)
+			ret = usb_submit_urb(yld->urb_irq, GFP_ATOMIC);
 		break;
 	default:
 		/* send new command */
 		yealink_do_idle_tasks(yld);
-		ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
+		if (!yld->shutdown)
+			ret = usb_submit_urb(yld->urb_ctl, GFP_ATOMIC);
+		break;
 	}
 
-	if (ret)
-		err("%s - usb_submit_urb failed %d", __FUNCTION__, ret);
+	if (ret && ret != -EPERM)
+		err("%s - usb_submit_urb failed %d", __func__, ret);
 }
 
 /*******************************************************************************
@@ -505,7 +512,7 @@ static int input_open(struct input_dev *dev)
 	struct yealink_dev *yld = input_get_drvdata(dev);
 	int i, ret;
 
-	dbg("%s", __FUNCTION__);
+	dbg("%s", __func__);
 
 	/* force updates to device */
 	for (i = 0; i<sizeof(yld->master); i++)
@@ -521,7 +528,7 @@ static int input_open(struct input_dev *dev)
 	yld->ctl_data->sum	= 0x100-CMD_INIT-10;
 	if ((ret = usb_submit_urb(yld->urb_ctl, GFP_KERNEL)) != 0) {
 		dbg("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, ret);
+		     __func__, ret);
 		return ret;
 	}
 	return 0;
@@ -531,8 +538,18 @@ static void input_close(struct input_dev *dev)
 {
 	struct yealink_dev *yld = input_get_drvdata(dev);
 
+	yld->shutdown = 1;
+	/*
+	 * Make sure the flag is seen by other CPUs before we start
+	 * killing URBs so new URBs won't be submitted
+	 */
+	smp_wmb();
+
 	usb_kill_urb(yld->urb_ctl);
 	usb_kill_urb(yld->urb_irq);
+
+	yld->shutdown = 0;
+	smp_wmb();
 }
 
 /*******************************************************************************
@@ -809,9 +826,6 @@ static int usb_cleanup(struct yealink_dev *yld, int err)
 	if (yld == NULL)
 		return err;
 
-	usb_kill_urb(yld->urb_irq);	/* parameter validation in core/urb */
-	usb_kill_urb(yld->urb_ctl);	/* parameter validation in core/urb */
-
         if (yld->idev) {
 		if (err)
 			input_free_device(yld->idev);
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index ce6fdec19e1..1f41ae94f26 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -2,12 +2,13 @@
  * Apple USB Touchpad (for post-February 2005 PowerBooks and MacBooks) driver
  *
  * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
- * Copyright (C) 2005      Johannes Berg (johannes@sipsolutions.net)
+ * Copyright (C) 2005-2008 Johannes Berg (johannes@sipsolutions.net)
  * Copyright (C) 2005      Stelian Pop (stelian@popies.net)
  * Copyright (C) 2005      Frank Arnold (frank@scirocco-5v-turbo.de)
  * Copyright (C) 2005      Peter Osterlund (petero2@telia.com)
  * Copyright (C) 2005      Michael Hanselmann (linux-kernel@hansmi.ch)
  * Copyright (C) 2006      Nicolas Boichat (nicolas@boichat.ch)
+ * Copyright (C) 2007-2008 Sven Anders (anders@anduras.de)
  *
  * Thanks to Alex Harper <basilisk@foobox.net> for his inputs.
  *
@@ -34,77 +35,64 @@
 #include <linux/module.h>
 #include <linux/usb/input.h>
 
-/* Apple has powerbooks which have the keyboard with different Product IDs */
-#define APPLE_VENDOR_ID		0x05AC
-
-/* These names come from Info.plist in AppleUSBTrackpad.kext */
-#define FOUNTAIN_ANSI_PRODUCT_ID	0x020E
-#define FOUNTAIN_ISO_PRODUCT_ID		0x020F
-
-#define FOUNTAIN_TP_ONLY_PRODUCT_ID	0x030A
-
-#define GEYSER1_TP_ONLY_PRODUCT_ID	0x030B
-
-#define GEYSER_ANSI_PRODUCT_ID		0x0214
-#define GEYSER_ISO_PRODUCT_ID		0x0215
-#define GEYSER_JIS_PRODUCT_ID		0x0216
-
-/* MacBook devices */
-#define GEYSER3_ANSI_PRODUCT_ID		0x0217
-#define GEYSER3_ISO_PRODUCT_ID		0x0218
-#define GEYSER3_JIS_PRODUCT_ID		0x0219
-
-/*
- * Geyser IV: same as Geyser III according to Info.plist in AppleUSBTrackpad.kext
- * -> same IOClass (AppleUSBGrIIITrackpad), same acceleration tables
- */
-#define GEYSER4_ANSI_PRODUCT_ID	0x021A
-#define GEYSER4_ISO_PRODUCT_ID	0x021B
-#define GEYSER4_JIS_PRODUCT_ID	0x021C
-
-#define GEYSER4_HF_ANSI_PRODUCT_ID	0x0229
-#define GEYSER4_HF_ISO_PRODUCT_ID	0x022A
-#define GEYSER4_HF_JIS_PRODUCT_ID	0x022B
+/* Type of touchpad */
+enum atp_touchpad_type {
+	ATP_FOUNTAIN,
+	ATP_GEYSER1,
+	ATP_GEYSER2,
+	ATP_GEYSER3,
+	ATP_GEYSER4
+};
 
-#define ATP_DEVICE(prod)					\
+#define ATP_DEVICE(prod, type)					\
+{								\
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |		\
 		       USB_DEVICE_ID_MATCH_INT_CLASS |		\
 		       USB_DEVICE_ID_MATCH_INT_PROTOCOL,	\
-	.idVendor = APPLE_VENDOR_ID,				\
+	.idVendor = 0x05ac, /* Apple */				\
 	.idProduct = (prod),					\
 	.bInterfaceClass = 0x03,				\
-	.bInterfaceProtocol = 0x02
+	.bInterfaceProtocol = 0x02,				\
+	.driver_info = ATP_ ## type,				\
+}
+
+/*
+ * Table of devices (Product IDs) that work with this driver.
+ * (The names come from Info.plist in AppleUSBTrackpad.kext,
+ *  According to Info.plist Geyser IV is the same as Geyser III.)
+ */
 
-/* table of devices that work with this driver */
 static struct usb_device_id atp_table [] = {
-	{ ATP_DEVICE(FOUNTAIN_ANSI_PRODUCT_ID) },
-	{ ATP_DEVICE(FOUNTAIN_ISO_PRODUCT_ID) },
-	{ ATP_DEVICE(FOUNTAIN_TP_ONLY_PRODUCT_ID) },
-	{ ATP_DEVICE(GEYSER1_TP_ONLY_PRODUCT_ID) },
+	/* PowerBooks Feb 2005, iBooks G4 */
+	ATP_DEVICE(0x020e, FOUNTAIN),	/* FOUNTAIN ANSI */
+	ATP_DEVICE(0x020f, FOUNTAIN),	/* FOUNTAIN ISO */
+	ATP_DEVICE(0x030a, FOUNTAIN),	/* FOUNTAIN TP ONLY */
+	ATP_DEVICE(0x030b, GEYSER1),	/* GEYSER 1 TP ONLY */
 
 	/* PowerBooks Oct 2005 */
-	{ ATP_DEVICE(GEYSER_ANSI_PRODUCT_ID) },
-	{ ATP_DEVICE(GEYSER_ISO_PRODUCT_ID) },
-	{ ATP_DEVICE(GEYSER_JIS_PRODUCT_ID) },
+	ATP_DEVICE(0x0214, GEYSER2),	/* GEYSER 2 ANSI */
+	ATP_DEVICE(0x0215, GEYSER2),	/* GEYSER 2 ISO */
+	ATP_DEVICE(0x0216, GEYSER2),	/* GEYSER 2 JIS */
 
 	/* Core Duo MacBook & MacBook Pro */
-	{ ATP_DEVICE(GEYSER3_ANSI_PRODUCT_ID) },
-	{ ATP_DEVICE(GEYSER3_ISO_PRODUCT_ID) },
-	{ ATP_DEVICE(GEYSER3_JIS_PRODUCT_ID) },
+	ATP_DEVICE(0x0217, GEYSER3),	/* GEYSER 3 ANSI */
+	ATP_DEVICE(0x0218, GEYSER3),	/* GEYSER 3 ISO */
+	ATP_DEVICE(0x0219, GEYSER3),	/* GEYSER 3 JIS */
 
 	/* Core2 Duo MacBook & MacBook Pro */
-	{ ATP_DEVICE(GEYSER4_ANSI_PRODUCT_ID) },
-	{ ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) },
-	{ ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) },
+	ATP_DEVICE(0x021a, GEYSER4),	/* GEYSER 4 ANSI */
+	ATP_DEVICE(0x021b, GEYSER4),	/* GEYSER 4 ISO */
+	ATP_DEVICE(0x021c, GEYSER4),	/* GEYSER 4 JIS */
 
-	{ ATP_DEVICE(GEYSER4_HF_ANSI_PRODUCT_ID) },
-	{ ATP_DEVICE(GEYSER4_HF_ISO_PRODUCT_ID) },
-	{ ATP_DEVICE(GEYSER4_HF_JIS_PRODUCT_ID) },
+	/* Core2 Duo MacBook3,1 */
+	ATP_DEVICE(0x0229, GEYSER4),	/* GEYSER 4 HF ANSI */
+	ATP_DEVICE(0x022a, GEYSER4),	/* GEYSER 4 HF ISO */
+	ATP_DEVICE(0x022b, GEYSER4),	/* GEYSER 4 HF JIS */
 
 	/* Terminating entry */
 	{ }
 };
-MODULE_DEVICE_TABLE (usb, atp_table);
+MODULE_DEVICE_TABLE(usb, atp_table);
 
 /*
  * number of sensors. Note that only 16 instead of 26 X (horizontal)
@@ -124,9 +112,13 @@ MODULE_DEVICE_TABLE (usb, atp_table);
  * We try to keep the touchpad aspect ratio while still doing only simple
  * arithmetics.
  * The factors below give coordinates like:
- *	0 <= x <  960 on 12" and 15" Powerbooks
- *	0 <= x < 1600 on 17" Powerbooks
- *	0 <= y <  646
+ *
+ *      0 <= x <  960 on 12" and 15" Powerbooks
+ *      0 <= x < 1600 on 17" Powerbooks and 17" MacBook Pro
+ *      0 <= x < 1216 on MacBooks and 15" MacBook Pro
+ *
+ *      0 <= y <  646 on all Powerbooks
+ *      0 <= y <  774 on all MacBooks
  */
 #define ATP_XFACT	64
 #define ATP_YFACT	43
@@ -147,43 +139,46 @@ MODULE_DEVICE_TABLE (usb, atp_table);
 /* Structure to hold all of our device specific stuff */
 struct atp {
 	char			phys[64];
-	struct usb_device *	udev;		/* usb device */
-	struct urb *		urb;		/* usb request block */
-	signed char *		data;		/* transferred data */
-	struct input_dev *	input;		/* input dev */
-	unsigned char		open;		/* non-zero if opened */
-	unsigned char		valid;		/* are the sensors valid ? */
-	unsigned char		size_detect_done;
-	unsigned char		overflowwarn;	/* overflow warning printed? */
+	struct usb_device	*udev;		/* usb device */
+	struct urb		*urb;		/* usb request block */
+	signed char		*data;		/* transferred data */
+	struct input_dev	*input;		/* input dev */
+	enum atp_touchpad_type	type;		/* type of touchpad */
+	bool			open;
+	bool			valid;		/* are the samples valid? */
+	bool			size_detect_done;
+	bool			overflow_warned;
 	int			x_old;		/* last reported x/y, */
 	int			y_old;		/* used for smoothing */
-						/* current value of the sensors */
 	signed char		xy_cur[ATP_XSENSORS + ATP_YSENSORS];
-						/* last value of the sensors */
 	signed char		xy_old[ATP_XSENSORS + ATP_YSENSORS];
-						/* accumulated sensors */
 	int			xy_acc[ATP_XSENSORS + ATP_YSENSORS];
-	int			datalen;	/* size of an USB urb transfer */
-	int			idlecount;      /* number of empty packets */
-	struct work_struct      work;
+	int			datalen;	/* size of USB transfer */
+	int			idlecount;	/* number of empty packets */
+	struct work_struct	work;
 };
 
 #define dbg_dump(msg, tab) \
 	if (debug > 1) {						\
-		int i;							\
-		printk("appletouch: %s %lld", msg, (long long)jiffies); \
-		for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++)	\
-			printk(" %02x", tab[i]);			\
+		int __i;						\
+		printk(KERN_DEBUG "appletouch: %s", msg);		\
+		for (__i = 0; __i < ATP_XSENSORS + ATP_YSENSORS; __i++)	\
+			printk(" %02x", tab[__i]);			\
 		printk("\n");						\
 	}
 
 #define dprintk(format, a...)						\
 	do {								\
-		if (debug) printk(KERN_DEBUG format, ##a);		\
+		if (debug)						\
+			printk(KERN_DEBUG format, ##a);			\
 	} while (0)
 
-MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold, Michael Hanselmann");
-MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver");
+MODULE_AUTHOR("Johannes Berg");
+MODULE_AUTHOR("Stelian Pop");
+MODULE_AUTHOR("Frank Arnold");
+MODULE_AUTHOR("Michael Hanselmann");
+MODULE_AUTHOR("Sven Anders");
+MODULE_DESCRIPTION("Apple PowerBook and MacBook USB touchpad driver");
 MODULE_LICENSE("GPL");
 
 /*
@@ -191,46 +186,14 @@ MODULE_LICENSE("GPL");
  */
 static int threshold = ATP_THRESHOLD;
 module_param(threshold, int, 0644);
-MODULE_PARM_DESC(threshold, "Discards any change in data from a sensor (trackpad has hundreds of these sensors) less than this value");
+MODULE_PARM_DESC(threshold, "Discard any change in data from a sensor"
+			    " (the trackpad has many of these sensors)"
+			    " less than this value.");
 
-static int debug = 1;
+static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Activate debugging output");
 
-static inline int atp_is_fountain(struct atp *dev)
-{
-	u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct);
-
-	return productId == FOUNTAIN_ANSI_PRODUCT_ID ||
-	       productId == FOUNTAIN_ISO_PRODUCT_ID ||
-	       productId == FOUNTAIN_TP_ONLY_PRODUCT_ID;
-}
-
-/* Checks if the device a Geyser 2 (ANSI, ISO, JIS) */
-static inline int atp_is_geyser_2(struct atp *dev)
-{
-	u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct);
-
-	return (productId == GEYSER_ANSI_PRODUCT_ID) ||
-		(productId == GEYSER_ISO_PRODUCT_ID) ||
-		(productId == GEYSER_JIS_PRODUCT_ID);
-}
-
-static inline int atp_is_geyser_3(struct atp *dev)
-{
-	u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct);
-
-	return (productId == GEYSER3_ANSI_PRODUCT_ID) ||
-		(productId == GEYSER3_ISO_PRODUCT_ID) ||
-		(productId == GEYSER3_JIS_PRODUCT_ID) ||
-		(productId == GEYSER4_ANSI_PRODUCT_ID) ||
-		(productId == GEYSER4_ISO_PRODUCT_ID) ||
-		(productId == GEYSER4_JIS_PRODUCT_ID) ||
-		(productId == GEYSER4_HF_ANSI_PRODUCT_ID) ||
-		(productId == GEYSER4_HF_ISO_PRODUCT_ID) ||
-		(productId == GEYSER4_HF_JIS_PRODUCT_ID);
-}
-
 /*
  * By default newer Geyser devices send standard USB HID mouse
  * packets (Report ID 2). This code changes device mode, so it
@@ -240,6 +203,7 @@ static int atp_geyser_init(struct usb_device *udev)
 {
 	char data[8];
 	int size;
+	int i;
 
 	size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 			ATP_GEYSER_MODE_READ_REQUEST_ID,
@@ -248,8 +212,11 @@ static int atp_geyser_init(struct usb_device *udev)
 			ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
 
 	if (size != 8) {
-		err("Could not do mode read request from device"
-		    " (Geyser Raw mode)");
+		dprintk("atp_geyser_init: read error\n");
+		for (i = 0; i < 8; i++)
+			dprintk("appletouch[%d]: %d\n", i, data[i]);
+
+		err("Failed to read mode from device.");
 		return -EIO;
 	}
 
@@ -263,8 +230,11 @@ static int atp_geyser_init(struct usb_device *udev)
 			ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
 
 	if (size != 8) {
-		err("Could not do mode write request to device"
-		    " (Geyser Raw mode)");
+		dprintk("atp_geyser_init: write error\n");
+		for (i = 0; i < 8; i++)
+			dprintk("appletouch[%d]: %d\n", i, data[i]);
+
+		err("Failed to request geyser raw mode");
 		return -EIO;
 	}
 	return 0;
@@ -280,15 +250,15 @@ static void atp_reinit(struct work_struct *work)
 	struct usb_device *udev = dev->udev;
 	int retval;
 
+	dprintk("appletouch: putting appletouch to sleep (reinit)\n");
 	dev->idlecount = 0;
 
 	atp_geyser_init(udev);
 
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
-	if (retval) {
-		err("%s - usb_submit_urb failed with result %d",
-		    __FUNCTION__, retval);
-	}
+	if (retval)
+		err("atp_reinit: usb_submit_urb failed with error %d",
+		    retval);
 }
 
 static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
@@ -323,7 +293,8 @@ static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
 		 *
 		 * - Jason Parekh <jasonparekh@gmail.com>
 		 */
-		if (i < 1 || (!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) {
+		if (i < 1 ||
+		    (!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) {
 			(*fingers)++;
 			is_increasing = 1;
 		} else if (i > 0 && xy_sensors[i - 1] >= xy_sensors[i]) {
@@ -331,11 +302,11 @@ static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
 		}
 
 		/*
-		 * Subtracts threshold so a high sensor that just passes the threshold
-		 * won't skew the calculated absolute coordinate.  Fixes an issue
-		 * where slowly moving the mouse would occassionaly jump a number of
-		 * pixels (let me restate--slowly moving the mouse makes this issue
-		 * most apparent).
+		 * Subtracts threshold so a high sensor that just passes the
+		 * threshold won't skew the calculated absolute coordinate.
+		 * Fixes an issue where slowly moving the mouse would
+		 * occasionally jump a number of pixels (slowly moving the
+		 * finger makes this issue most apparent.)
 		 */
 		pcum += (xy_sensors[i] - threshold) * i;
 		psum += (xy_sensors[i] - threshold);
@@ -356,7 +327,7 @@ static inline void atp_report_fingers(struct input_dev *input, int fingers)
 	input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2);
 }
 
-static void atp_complete(struct urb* urb)
+static void atp_complete(struct urb *urb)
 {
 	int x, y, x_z, y_z, x_f, y_f;
 	int retval, i, j;
@@ -368,22 +339,22 @@ static void atp_complete(struct urb* urb)
 		/* success */
 		break;
 	case -EOVERFLOW:
-		if(!dev->overflowwarn) {
+		if (!dev->overflow_warned) {
 			printk(KERN_WARNING "appletouch: OVERFLOW with data "
 				"length %d, actual length is %d\n",
 				dev->datalen, dev->urb->actual_length);
-			dev->overflowwarn = 1;
+			dev->overflow_warned = true;
 		}
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* This urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __FUNCTION__, urb->status);
+		dbg("atp_complete: urb shutting down with status: %d",
+		    urb->status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __FUNCTION__, urb->status);
+		dbg("atp_complete: nonzero urb status received: %d",
+		    urb->status);
 		goto exit;
 	}
 
@@ -396,7 +367,7 @@ static void atp_complete(struct urb* urb)
 	}
 
 	/* reorder the sensors values */
-	if (atp_is_geyser_3(dev)) {
+	if (dev->type == ATP_GEYSER3 || dev->type == ATP_GEYSER4) {
 		memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
 
 		/*
@@ -415,7 +386,7 @@ static void atp_complete(struct urb* urb)
 			dev->xy_cur[ATP_XSENSORS + i] = dev->data[j + 1];
 			dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 2];
 		}
-	} else if (atp_is_geyser_2(dev)) {
+	} else if (dev->type == ATP_GEYSER2) {
 		memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
 
 		/*
@@ -438,7 +409,7 @@ static void atp_complete(struct urb* urb)
 	} else {
 		for (i = 0; i < 8; i++) {
 			/* X values */
-			dev->xy_cur[i     ] = dev->data[5 * i +  2];
+			dev->xy_cur[i +  0] = dev->data[5 * i +  2];
 			dev->xy_cur[i +  8] = dev->data[5 * i +  4];
 			dev->xy_cur[i + 16] = dev->data[5 * i + 42];
 			if (i < 2)
@@ -454,21 +425,22 @@ static void atp_complete(struct urb* urb)
 
 	if (!dev->valid) {
 		/* first sample */
-		dev->valid = 1;
+		dev->valid = true;
 		dev->x_old = dev->y_old = -1;
 		memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
 
 		if (dev->size_detect_done ||
-		    atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */
+		    dev->type == ATP_GEYSER3) /* No 17" Macbooks (yet) */
 			goto exit;
 
 		/* 17" Powerbooks have extra X sensors */
-		for (i = (atp_is_geyser_2(dev) ? 15 : 16); i < ATP_XSENSORS; i++) {
+		for (i = (dev->type == ATP_GEYSER2 ? 15 : 16);
+		     i < ATP_XSENSORS; i++) {
 			if (!dev->xy_cur[i])
 				continue;
 
 			printk(KERN_INFO "appletouch: 17\" model detected.\n");
-			if (atp_is_geyser_2(dev))
+			if (dev->type == ATP_GEYSER2)
 				input_set_abs_params(dev->input, ABS_X, 0,
 						     (20 - 1) *
 						     ATP_XFACT - 1,
@@ -548,11 +520,15 @@ static void atp_complete(struct urb* urb)
 	 * several hundred times a second. Re-initialization does not
 	 * work on Fountain touchpads.
 	 */
-	if (!atp_is_fountain(dev)) {
+	if (dev->type != ATP_FOUNTAIN) {
+		/*
+		 * Button must not be pressed when entering suspend,
+		 * otherwise we will never release the button.
+		 */
 		if (!x && !y && !key) {
 			dev->idlecount++;
 			if (dev->idlecount == 10) {
-				dev->valid = 0;
+				dev->valid = false;
 				schedule_work(&dev->work);
 				/* Don't resubmit urb here, wait for reinit */
 				return;
@@ -561,12 +537,11 @@ static void atp_complete(struct urb* urb)
 			dev->idlecount = 0;
 	}
 
-exit:
+ exit:
 	retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
-	if (retval) {
-		err("%s - usb_submit_urb failed with result %d",
-		    __FUNCTION__, retval);
-	}
+	if (retval)
+		err("atp_complete: usb_submit_urb failed with result %d",
+		    retval);
 }
 
 static int atp_open(struct input_dev *input)
@@ -593,7 +568,7 @@ static int atp_handle_geyser(struct atp *dev)
 {
 	struct usb_device *udev = dev->udev;
 
-	if (!atp_is_fountain(dev)) {
+	if (dev->type != ATP_FOUNTAIN) {
 		/* switch to raw sensor mode */
 		if (atp_geyser_init(udev))
 			return -EIO;
@@ -604,7 +579,8 @@ static int atp_handle_geyser(struct atp *dev)
 	return 0;
 }
 
-static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id)
+static int atp_probe(struct usb_interface *iface,
+		     const struct usb_device_id *id)
 {
 	struct atp *dev;
 	struct input_dev *input_dev;
@@ -640,13 +616,12 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
 
 	dev->udev = udev;
 	dev->input = input_dev;
-	dev->overflowwarn = 0;
-	if (atp_is_geyser_3(dev))
-		dev->datalen = 64;
-	else if (atp_is_geyser_2(dev))
-		dev->datalen = 64;
-	else
+	dev->type = id->driver_info;
+	dev->overflow_warned = false;
+	if (dev->type == ATP_FOUNTAIN || dev->type == ATP_GEYSER1)
 		dev->datalen = 81;
+	else
+		dev->datalen = 64;
 
 	dev->urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!dev->urb)
@@ -680,7 +655,7 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
 
 	set_bit(EV_ABS, input_dev->evbit);
 
-	if (atp_is_geyser_3(dev)) {
+	if (dev->type == ATP_GEYSER3 || dev->type == ATP_GEYSER4) {
 		/*
 		 * MacBook have 20 X sensors, 10 Y sensors
 		 */
@@ -688,7 +663,7 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
 				     ((20 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0);
 		input_set_abs_params(input_dev, ABS_Y, 0,
 				     ((10 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0);
-	} else if (atp_is_geyser_2(dev)) {
+	} else if (dev->type == ATP_GEYSER2) {
 		/*
 		 * Oct 2005 15" PowerBooks have 15 X sensors, 17" are detected
 		 * later.
@@ -703,9 +678,11 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id
 		 * 17" models are detected later.
 		 */
 		input_set_abs_params(input_dev, ABS_X, 0,
-				     (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0);
+				     (16 - 1) * ATP_XFACT - 1,
+				     ATP_FUZZ, 0);
 		input_set_abs_params(input_dev, ABS_Y, 0,
-				     (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0);
+				     (ATP_YSENSORS - 1) * ATP_YFACT - 1,
+				     ATP_FUZZ, 0);
 	}
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
 
@@ -774,7 +751,7 @@ static int atp_suspend(struct usb_interface *iface, pm_message_t message)
 	struct atp *dev = usb_get_intfdata(iface);
 
 	usb_kill_urb(dev->urb);
-	dev->valid = 0;
+	dev->valid = false;
 
 	return 0;
 }
diff --git a/drivers/input/mouse/atarimouse.c b/drivers/input/mouse/atarimouse.c
index 98a3561d4b0..adf45b3040e 100644
--- a/drivers/input/mouse/atarimouse.c
+++ b/drivers/input/mouse/atarimouse.c
@@ -57,15 +57,12 @@ MODULE_AUTHOR("Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>");
 MODULE_DESCRIPTION("Atari mouse driver");
 MODULE_LICENSE("GPL");
 
-static int mouse_threshold[2] = {2,2};
+static int mouse_threshold[2] = {2, 2};
+module_param_array(mouse_threshold, int, NULL, 0);
 
-#ifdef __MODULE__
-MODULE_PARM(mouse_threshold, "2i");
-#endif
 #ifdef FIXED_ATARI_JOYSTICK
 extern int atari_mouse_buttons;
 #endif
-static int atamouse_used = 0;
 
 static struct input_dev *atamouse_dev;
 
@@ -97,9 +94,6 @@ static void atamouse_interrupt(char *buf)
 
 static int atamouse_open(struct input_dev *dev)
 {
-	if (atamouse_used++)
-		return 0;
-
 #ifdef FIXED_ATARI_JOYSTICK
 	atari_mouse_buttons = 0;
 #endif
@@ -107,23 +101,24 @@ static int atamouse_open(struct input_dev *dev)
 	ikbd_mouse_thresh(mouse_threshold[0], mouse_threshold[1]);
 	ikbd_mouse_rel_pos();
 	atari_input_mouse_interrupt_hook = atamouse_interrupt;
+
 	return 0;
 }
 
 static void atamouse_close(struct input_dev *dev)
 {
-	if (!--atamouse_used) {
-		ikbd_mouse_disable();
-		atari_mouse_interrupt_hook = NULL;
-	}
+	ikbd_mouse_disable();
+	atari_mouse_interrupt_hook = NULL;
 }
 
 static int __init atamouse_init(void)
 {
+	int error;
+
 	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ST_MFP))
 		return -ENODEV;
 
-	if (!(atari_keyb_init()))
+	if (!atari_keyb_init())
 		return -ENODEV;
 
 	atamouse_dev = input_allocate_device();
@@ -141,12 +136,14 @@ static int __init atamouse_init(void)
 	atamouse_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
 	atamouse_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
 		BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
+
 	atamouse_dev->open = atamouse_open;
 	atamouse_dev->close = atamouse_close;
 
-	if (input_register_device(atamouse_dev)) {
+	error = input_register_device(atamouse_dev);
+	if (error) {
 		input_free_device(atamouse_dev);
-		return -ENOMEM;
+		return error;
 	}
 
 	return 0;
diff --git a/drivers/input/mouse/hil_ptr.c b/drivers/input/mouse/hil_ptr.c
index 27f88fbb713..e532c48410e 100644
--- a/drivers/input/mouse/hil_ptr.c
+++ b/drivers/input/mouse/hil_ptr.c
@@ -247,19 +247,24 @@ static void hil_ptr_disconnect(struct serio *serio)
 
 static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
 {
-	struct hil_ptr	 *ptr;
-	const char	 *txt;
-	unsigned int	 i, naxsets, btntype;
-	uint8_t		 did, *idd;
-
-	if (!(ptr = kzalloc(sizeof(struct hil_ptr), GFP_KERNEL)))
+	struct hil_ptr	*ptr;
+	const char	*txt;
+	unsigned int	i, naxsets, btntype;
+	uint8_t		did, *idd;
+	int		error;
+
+	ptr = kzalloc(sizeof(struct hil_ptr), GFP_KERNEL);
+	if (!ptr)
 		return -ENOMEM;
 
 	ptr->dev = input_allocate_device();
-	if (!ptr->dev)
+	if (!ptr->dev) {
+		error = -ENOMEM;
 		goto bail0;
+	}
 
-	if (serio_open(serio, driver))
+	error = serio_open(serio, driver);
+	if (error)
 		goto bail1;
 
 	serio_set_drvdata(serio, ptr);
@@ -297,6 +302,7 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
 	did = ptr->idd[0];
 	idd = ptr->idd + 1;
 	txt = "unknown";
+
 	if ((did & HIL_IDD_DID_TYPE_MASK) == HIL_IDD_DID_TYPE_REL) {
 		ptr->dev->evbit[0] = BIT_MASK(EV_REL);
 		txt = "relative";
@@ -306,8 +312,11 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
 		ptr->dev->evbit[0] = BIT_MASK(EV_ABS);
 		txt = "absolute";
 	}
-	if (!ptr->dev->evbit[0])
+
+	if (!ptr->dev->evbit[0]) {
+		error = -ENODEV;
 		goto bail2;
+	}
 
 	ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd);
 	if (ptr->nbtn)
@@ -380,13 +389,19 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
 	ptr->dev->id.version	= 0x0100; /* TODO: get from ptr->rsc */
 	ptr->dev->dev.parent	= &serio->dev;
 
-	input_register_device(ptr->dev);
+	error = input_register_device(ptr->dev);
+	if (error) {
+		printk(KERN_INFO PREFIX "Unable to register input device\n");
+		goto bail2;
+	}
+
 	printk(KERN_INFO "input: %s (%s), ID: %d\n",
 		ptr->dev->name,
 		(btntype == BTN_MOUSE) ? "HIL mouse":"HIL tablet or touchpad",
 		did);
 
 	return 0;
+
  bail2:
 	serio_close(serio);
  bail1:
@@ -394,7 +409,7 @@ static int hil_ptr_connect(struct serio *serio, struct serio_driver *driver)
  bail0:
 	kfree(ptr);
 	serio_set_drvdata(serio, NULL);
-	return -ENODEV;
+	return error;
 }
 
 static struct serio_device_id hil_ptr_ids[] = {
diff --git a/drivers/input/mouse/inport.c b/drivers/input/mouse/inport.c
index 06c35fc553c..3827a22362d 100644
--- a/drivers/input/mouse/inport.c
+++ b/drivers/input/mouse/inport.c
@@ -1,6 +1,4 @@
 /*
- * $Id: inport.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  *
  *  Based on the work of:
diff --git a/drivers/input/mouse/logibm.c b/drivers/input/mouse/logibm.c
index 9ea895593b2..e2413113df2 100644
--- a/drivers/input/mouse/logibm.c
+++ b/drivers/input/mouse/logibm.c
@@ -1,6 +1,4 @@
 /*
- * $Id: logibm.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  *
  *  Based on the work of:
diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c
index 61cff8374e6..fd09c8df81f 100644
--- a/drivers/input/mouse/pc110pad.c
+++ b/drivers/input/mouse/pc110pad.c
@@ -1,6 +1,4 @@
 /*
- * $Id: pc110pad.c,v 1.12 2001/09/25 10:12:07 vojtech Exp $
- *
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  *
  *  Based on the work of:
diff --git a/drivers/input/mouse/sermouse.c b/drivers/input/mouse/sermouse.c
index ed917bfd086..17ff137b9bd 100644
--- a/drivers/input/mouse/sermouse.c
+++ b/drivers/input/mouse/sermouse.c
@@ -1,6 +1,4 @@
 /*
- * $Id: sermouse.c,v 1.17 2002/03/13 10:03:43 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index b989748598a..8137e50ded8 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -14,6 +14,7 @@
 #define MOUSEDEV_MIX		31
 
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -545,16 +546,21 @@ static int mousedev_open(struct inode *inode, struct file *file)
 	if (i >= MOUSEDEV_MINORS)
 		return -ENODEV;
 
+	lock_kernel();
 	error = mutex_lock_interruptible(&mousedev_table_mutex);
-	if (error)
+	if (error) {
+		unlock_kernel();
 		return error;
+	}
 	mousedev = mousedev_table[i];
 	if (mousedev)
 		get_device(&mousedev->dev);
 	mutex_unlock(&mousedev_table_mutex);
 
-	if (!mousedev)
+	if (!mousedev) {
+		unlock_kernel();
 		return -ENODEV;
+	}
 
 	client = kzalloc(sizeof(struct mousedev_client), GFP_KERNEL);
 	if (!client) {
@@ -573,6 +579,7 @@ static int mousedev_open(struct inode *inode, struct file *file)
 		goto err_free_client;
 
 	file->private_data = client;
+	unlock_kernel();
 	return 0;
 
  err_free_client:
@@ -580,6 +587,7 @@ static int mousedev_open(struct inode *inode, struct file *file)
 	kfree(client);
  err_put_mousedev:
 	put_device(&mousedev->dev);
+	unlock_kernel();
 	return error;
 }
 
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index ec4b6610f73..27d70d326ff 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -190,4 +190,14 @@ config SERIO_RAW
 	  To compile this driver as a module, choose M here: the
 	  module will be called serio_raw.
 
+config SERIO_XILINX_XPS_PS2
+	tristate "Xilinx XPS PS/2 Controller Support"
+	depends on PPC
+	help
+	  This driver supports XPS PS/2 IP from the Xilinx EDK on
+	  PowerPC platform.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xilinx_ps2.
+
 endif
diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
index 38b886887cb..9b6c8135955 100644
--- a/drivers/input/serio/Makefile
+++ b/drivers/input/serio/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_SERIO_PCIPS2)	+= pcips2.o
 obj-$(CONFIG_SERIO_MACEPS2)	+= maceps2.o
 obj-$(CONFIG_SERIO_LIBPS2)	+= libps2.o
 obj-$(CONFIG_SERIO_RAW)		+= serio_raw.o
+obj-$(CONFIG_SERIO_XILINX_XPS_PS2)	+= xilinx_ps2.o
diff --git a/drivers/input/serio/ct82c710.c b/drivers/input/serio/ct82c710.c
index 0d35018c23a..d1380fc72cc 100644
--- a/drivers/input/serio/ct82c710.c
+++ b/drivers/input/serio/ct82c710.c
@@ -1,6 +1,4 @@
 /*
- * $Id: ct82c710.c,v 1.11 2001/09/25 10:12:07 vojtech Exp $
- *
  *  Copyright (c) 1999-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
index 93a1a6ba216..37586a68d34 100644
--- a/drivers/input/serio/hil_mlc.c
+++ b/drivers/input/serio/hil_mlc.c
@@ -76,7 +76,7 @@ static struct timer_list	hil_mlcs_kicker;
 static int			hil_mlcs_probe;
 
 static void hil_mlcs_process(unsigned long unused);
-DECLARE_TASKLET_DISABLED(hil_mlcs_tasklet, hil_mlcs_process, 0);
+static DECLARE_TASKLET_DISABLED(hil_mlcs_tasklet, hil_mlcs_process, 0);
 
 
 /* #define HIL_MLC_DEBUG */
@@ -459,7 +459,7 @@ static int hilse_operate(hil_mlc *mlc, int repoll)
 #define OUT_LAST(pack) \
 { HILSE_OUT_LAST,	{ .packet = pack }, 0, 0, 0, 0 },
 
-const struct hilse_node hil_mlc_se[HILSEN_END] = {
+static const struct hilse_node hil_mlc_se[HILSEN_END] = {
 
 	/* 0  HILSEN_START */
 	FUNC(hilse_init_lcv, 0,	HILSEN_NEXT,	HILSEN_SLEEP,	0)
@@ -784,7 +784,7 @@ static void hil_mlcs_process(unsigned long unused)
 
 /************************* Keepalive timer task *********************/
 
-void hil_mlcs_timer(unsigned long data)
+static void hil_mlcs_timer(unsigned long data)
 {
 	hil_mlcs_probe = 1;
 	tasklet_schedule(&hil_mlcs_tasklet);
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index edfedd9a166..7b233a492ad 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -105,6 +105,10 @@ EXPORT_SYMBOL(__hp_sdc_enqueue_transaction);
 EXPORT_SYMBOL(hp_sdc_enqueue_transaction);
 EXPORT_SYMBOL(hp_sdc_dequeue_transaction);
 
+static unsigned int hp_sdc_disabled;
+module_param_named(no_hpsdc, hp_sdc_disabled, bool, 0);
+MODULE_PARM_DESC(no_hpsdc, "Do not enable HP SDC driver.");
+
 static hp_i8042_sdc	hp_sdc;	/* All driver state is kept in here. */
 
 /*************** primitives for use in any context *********************/
@@ -980,6 +984,11 @@ static int __init hp_sdc_register(void)
 	unsigned char i;
 #endif
 
+	if (hp_sdc_disabled) {
+		printk(KERN_WARNING PREFIX "HP SDC driver disabled by no_hpsdc=1.\n");
+		return -ENODEV;
+	}
+
 	hp_sdc.dev = NULL;
 	hp_sdc.dev_err = 0;
 #if defined(__hppa__)
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index 587398f5c9d..b587e2d576a 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -50,7 +50,7 @@ MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
 MODULE_DESCRIPTION("Glue for onboard HIL MLC in HP-PARISC machines");
 MODULE_LICENSE("Dual BSD/GPL");
 
-struct hp_sdc_mlc_priv_s {
+static struct hp_sdc_mlc_priv_s {
 	int emtestmode;
 	hp_sdc_transaction trans;
 	u8 tseq[16];
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 78eb7841174..fe732a574ec 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -63,13 +63,22 @@ static inline void i8042_write_command(int val)
 	outb(val, I8042_COMMAND_REG);
 }
 
-#if defined(__i386__) || defined(__x86_64__)
+#ifdef CONFIG_X86
 
 #include <linux/dmi.h>
 
 static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 	{
 		/* AUX LOOP command does not raise AUX IRQ */
+		.ident = "Arima-Rioworks HDAMB",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "RIOWORKS"),
+			DMI_MATCH(DMI_BOARD_NAME, "HDAMB"),
+			DMI_MATCH(DMI_BOARD_VERSION, "Rev E"),
+		},
+	},
+	{
+		/* AUX LOOP command does not raise AUX IRQ */
 		.ident = "ASUS P65UP5",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
@@ -118,6 +127,14 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "VS2005R2"),
 		},
 	},
+	{
+		.ident = "Medion MAM 2070",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Notebook"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MAM 2070"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "5a"),
+		},
+	},
 	{ }
 };
 
@@ -291,17 +308,36 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
 		},
 	},
+	{
+		.ident = "Acer Aspire 1360",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"),
+		},
+	},
+	{
+		.ident = "Gericom Bellagio",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Gericom"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "N34AS6"),
+		},
+	},
 	{ }
 };
 
-
-
+#ifdef CONFIG_PNP
+static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
+	{
+		.ident = "Intel MBO Desktop D845PESV",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "D845PESV"),
+			DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
+		},
+	},
+	{ }
+};
 #endif
 
-#ifdef CONFIG_X86
-
-#include <linux/dmi.h>
-
 /*
  * Some Wistron based laptops need us to explicitly enable the 'Dritek
  * keyboard extension' to make their extra keys start generating scancodes.
@@ -331,6 +367,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
 		},
 	},
 	{
+		.ident = "Acer Aspire 5720",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
+		},
+	},
+	{
 		.ident = "Acer Aspire 9110",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -356,7 +399,6 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
 
 #endif /* CONFIG_X86 */
 
-
 #ifdef CONFIG_PNP
 #include <linux/pnp.h>
 
@@ -466,6 +508,11 @@ static int __init i8042_pnp_init(void)
 	int pnp_data_busted = 0;
 	int err;
 
+#ifdef CONFIG_X86
+	if (dmi_check_system(i8042_dmi_nopnp_table))
+		i8042_nopnp = 1;
+#endif
+
 	if (i8042_nopnp) {
 		printk(KERN_INFO "i8042: PNP detection disabled\n");
 		return 0;
@@ -591,15 +638,13 @@ static int __init i8042_platform_init(void)
         i8042_reset = 1;
 #endif
 
-#if defined(__i386__) || defined(__x86_64__)
+#ifdef CONFIG_X86
 	if (dmi_check_system(i8042_dmi_noloop_table))
 		i8042_noloop = 1;
 
 	if (dmi_check_system(i8042_dmi_nomux_table))
 		i8042_nomux = 1;
-#endif
 
-#ifdef CONFIG_X86
 	if (dmi_check_system(i8042_dmi_dritek_table))
 		i8042_dritek = 1;
 #endif /* CONFIG_X86 */
diff --git a/drivers/input/serio/libps2.c b/drivers/input/serio/libps2.c
index b819239d74d..2b304c22c20 100644
--- a/drivers/input/serio/libps2.c
+++ b/drivers/input/serio/libps2.c
@@ -26,15 +26,6 @@ MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
 MODULE_DESCRIPTION("PS/2 driver library");
 MODULE_LICENSE("GPL");
 
-/* Work structure to schedule execution of a command */
-struct ps2work {
-	struct work_struct work;
-	struct ps2dev *ps2dev;
-	int command;
-	unsigned char param[0];
-};
-
-
 /*
  * ps2_sendbyte() sends a byte to the device and waits for acknowledge.
  * It doesn't handle retransmission, though it could - because if there
@@ -246,49 +237,6 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command)
 EXPORT_SYMBOL(ps2_command);
 
 /*
- * ps2_execute_scheduled_command() sends a command, previously scheduled by
- * ps2_schedule_command(), to a PS/2 device (keyboard, mouse, etc.)
- */
-
-static void ps2_execute_scheduled_command(struct work_struct *work)
-{
-	struct ps2work *ps2work = container_of(work, struct ps2work, work);
-
-	ps2_command(ps2work->ps2dev, ps2work->param, ps2work->command);
-	kfree(ps2work);
-}
-
-/*
- * ps2_schedule_command() allows to schedule delayed execution of a PS/2
- * command and can be used to issue a command from an interrupt or softirq
- * context.
- */
-
-int ps2_schedule_command(struct ps2dev *ps2dev, unsigned char *param, int command)
-{
-	struct ps2work *ps2work;
-	int send = (command >> 12) & 0xf;
-	int receive = (command >> 8) & 0xf;
-
-	if (!(ps2work = kmalloc(sizeof(struct ps2work) + max(send, receive), GFP_ATOMIC)))
-		return -1;
-
-	memset(ps2work, 0, sizeof(struct ps2work));
-	ps2work->ps2dev = ps2dev;
-	ps2work->command = command;
-	memcpy(ps2work->param, param, send);
-	INIT_WORK(&ps2work->work, ps2_execute_scheduled_command);
-
-	if (!schedule_work(&ps2work->work)) {
-		kfree(ps2work);
-		return -1;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(ps2_schedule_command);
-
-/*
  * ps2_init() initializes ps2dev structure
  */
 
diff --git a/drivers/input/serio/q40kbd.c b/drivers/input/serio/q40kbd.c
index d962a8d78b1..e36a0901646 100644
--- a/drivers/input/serio/q40kbd.c
+++ b/drivers/input/serio/q40kbd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: q40kbd.c,v 1.12 2002/02/02 22:26:44 vojtech Exp $
- *
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  *
  *  Based on the work of:
@@ -49,7 +47,7 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION("Q40 PS/2 keyboard controller driver");
 MODULE_LICENSE("GPL");
 
-DEFINE_SPINLOCK(q40kbd_lock);
+static DEFINE_SPINLOCK(q40kbd_lock);
 static struct serio *q40kbd_port;
 static struct platform_device *q40kbd_device;
 
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c
index 34c59d9c620..1567b778247 100644
--- a/drivers/input/serio/rpckbd.c
+++ b/drivers/input/serio/rpckbd.c
@@ -1,6 +1,4 @@
 /*
- * $Id: rpckbd.c,v 1.7 2001/09/25 10:12:07 vojtech Exp $
- *
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  *  Copyright (c) 2002 Russell King
  */
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 7f5293828fb..78f2abb5c11 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -331,9 +331,10 @@ static void serio_handle_event(void)
 }
 
 /*
- * Remove all events that have been submitted for a given serio port.
+ * Remove all events that have been submitted for a given
+ * object, be it serio port or driver.
  */
-static void serio_remove_pending_events(struct serio *serio)
+static void serio_remove_pending_events(void *object)
 {
 	struct list_head *node, *next;
 	struct serio_event *event;
@@ -343,7 +344,7 @@ static void serio_remove_pending_events(struct serio *serio)
 
 	list_for_each_safe(node, next, &serio_event_list) {
 		event = list_entry(node, struct serio_event, node);
-		if (event->object == serio) {
+		if (event->object == object) {
 			list_del_init(node);
 			serio_free_event(event);
 		}
@@ -837,7 +838,9 @@ void serio_unregister_driver(struct serio_driver *drv)
 	struct serio *serio;
 
 	mutex_lock(&serio_mutex);
+
 	drv->manual_bind = 1;	/* so serio_find_driver ignores it */
+	serio_remove_pending_events(drv);
 
 start_over:
 	list_for_each_entry(serio, &serio_list, node) {
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index 0403622ae26..c9397c8ee97 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/serio.h>
@@ -81,9 +82,10 @@ static int serio_raw_open(struct inode *inode, struct file *file)
 	struct serio_raw_list *list;
 	int retval = 0;
 
+	lock_kernel();
 	retval = mutex_lock_interruptible(&serio_raw_mutex);
 	if (retval)
-		return retval;
+		goto out_bkl;
 
 	if (!(serio_raw = serio_raw_locate(iminor(inode)))) {
 		retval = -ENODEV;
@@ -108,6 +110,8 @@ static int serio_raw_open(struct inode *inode, struct file *file)
 
 out:
 	mutex_unlock(&serio_raw_mutex);
+out_bkl:
+	unlock_kernel();
 	return retval;
 }
 
diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c
index 7ff71ba7b7c..b9694b6445d 100644
--- a/drivers/input/serio/serport.c
+++ b/drivers/input/serio/serport.c
@@ -216,7 +216,7 @@ static void serport_ldisc_write_wakeup(struct tty_struct * tty)
  * The line discipline structure.
  */
 
-static struct tty_ldisc serport_ldisc = {
+static struct tty_ldisc_ops serport_ldisc = {
 	.owner =	THIS_MODULE,
 	.name =		"input",
 	.open =		serport_ldisc_open,
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
new file mode 100644
index 00000000000..0ed044d5e68
--- /dev/null
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -0,0 +1,380 @@
+/*
+ * Xilinx XPS PS/2 device driver
+ *
+ * (c) 2005 MontaVista Software, Inc.
+ * (c) 2008 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/module.h>
+#include <linux/serio.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#define DRIVER_NAME		"xilinx_ps2"
+
+/* Register offsets for the xps2 device */
+#define XPS2_SRST_OFFSET	0x00000000 /* Software Reset register */
+#define XPS2_STATUS_OFFSET	0x00000004 /* Status register */
+#define XPS2_RX_DATA_OFFSET	0x00000008 /* Receive Data register */
+#define XPS2_TX_DATA_OFFSET	0x0000000C /* Transmit Data register */
+#define XPS2_GIER_OFFSET	0x0000002C /* Global Interrupt Enable reg */
+#define XPS2_IPISR_OFFSET	0x00000030 /* Interrupt Status register */
+#define XPS2_IPIER_OFFSET	0x00000038 /* Interrupt Enable register */
+
+/* Reset Register Bit Definitions */
+#define XPS2_SRST_RESET		0x0000000A /* Software Reset  */
+
+/* Status Register Bit Positions */
+#define XPS2_STATUS_RX_FULL	0x00000001 /* Receive Full  */
+#define XPS2_STATUS_TX_FULL	0x00000002 /* Transmit Full  */
+
+/* Bit definitions for ISR/IER registers. Both the registers have the same bit
+ * definitions and are only defined once. */
+#define XPS2_IPIXR_WDT_TOUT	0x00000001 /* Watchdog Timeout Interrupt */
+#define XPS2_IPIXR_TX_NOACK	0x00000002 /* Transmit No ACK Interrupt */
+#define XPS2_IPIXR_TX_ACK	0x00000004 /* Transmit ACK (Data) Interrupt */
+#define XPS2_IPIXR_RX_OVF	0x00000008 /* Receive Overflow Interrupt */
+#define XPS2_IPIXR_RX_ERR	0x00000010 /* Receive Error Interrupt */
+#define XPS2_IPIXR_RX_FULL	0x00000020 /* Receive Data Interrupt */
+
+/* Mask for all the Transmit Interrupts */
+#define XPS2_IPIXR_TX_ALL	(XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_TX_ACK)
+
+/* Mask for all the Receive Interrupts */
+#define XPS2_IPIXR_RX_ALL	(XPS2_IPIXR_RX_OVF | XPS2_IPIXR_RX_ERR |  \
+					XPS2_IPIXR_RX_FULL)
+
+/* Mask for all the Interrupts */
+#define XPS2_IPIXR_ALL		(XPS2_IPIXR_TX_ALL | XPS2_IPIXR_RX_ALL |  \
+					XPS2_IPIXR_WDT_TOUT)
+
+/* Global Interrupt Enable mask */
+#define XPS2_GIER_GIE_MASK	0x80000000
+
+struct xps2data {
+	int irq;
+	u32 phys_addr;
+	u32 remap_size;
+	spinlock_t lock;
+	u8 rxb;				/* Rx buffer */
+	void __iomem *base_address;	/* virt. address of control registers */
+	unsigned int dfl;
+	struct serio serio;		/* serio */
+};
+
+/************************************/
+/* XPS PS/2 data transmission calls */
+/************************************/
+
+/*
+ * xps2_recv() will attempt to receive a byte of data from the PS/2 port.
+ */
+static int xps2_recv(struct xps2data *drvdata, u8 *byte)
+{
+	u32 sr;
+	int status = -1;
+
+	/* If there is data available in the PS/2 receiver, read it */
+	sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
+	if (sr & XPS2_STATUS_RX_FULL) {
+		*byte = in_be32(drvdata->base_address + XPS2_RX_DATA_OFFSET);
+		status = 0;
+	}
+
+	return status;
+}
+
+/*********************/
+/* Interrupt handler */
+/*********************/
+static irqreturn_t xps2_interrupt(int irq, void *dev_id)
+{
+	struct xps2data *drvdata = dev_id;
+	u32 intr_sr;
+	u8 c;
+	int status;
+
+	/* Get the PS/2 interrupts and clear them */
+	intr_sr = in_be32(drvdata->base_address + XPS2_IPISR_OFFSET);
+	out_be32(drvdata->base_address + XPS2_IPISR_OFFSET, intr_sr);
+
+	/* Check which interrupt is active */
+	if (intr_sr & XPS2_IPIXR_RX_OVF)
+		printk(KERN_WARNING "%s: receive overrun error\n",
+			drvdata->serio.name);
+
+	if (intr_sr & XPS2_IPIXR_RX_ERR)
+		drvdata->dfl |= SERIO_PARITY;
+
+	if (intr_sr & (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_WDT_TOUT))
+		drvdata->dfl |= SERIO_TIMEOUT;
+
+	if (intr_sr & XPS2_IPIXR_RX_FULL) {
+		status = xps2_recv(drvdata, &drvdata->rxb);
+
+		/* Error, if a byte is not received */
+		if (status) {
+			printk(KERN_ERR
+				"%s: wrong rcvd byte count (%d)\n",
+				drvdata->serio.name, status);
+		} else {
+			c = drvdata->rxb;
+			serio_interrupt(&drvdata->serio, c, drvdata->dfl);
+			drvdata->dfl = 0;
+		}
+	}
+
+	if (intr_sr & XPS2_IPIXR_TX_ACK)
+		drvdata->dfl = 0;
+
+	return IRQ_HANDLED;
+}
+
+/*******************/
+/* serio callbacks */
+/*******************/
+
+/*
+ * sxps2_write() sends a byte out through the PS/2 interface.
+ */
+static int sxps2_write(struct serio *pserio, unsigned char c)
+{
+	struct xps2data *drvdata = pserio->port_data;
+	unsigned long flags;
+	u32 sr;
+	int status = -1;
+
+	spin_lock_irqsave(&drvdata->lock, flags);
+
+	/* If the PS/2 transmitter is empty send a byte of data */
+	sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
+	if (!(sr & XPS2_STATUS_TX_FULL)) {
+		out_be32(drvdata->base_address + XPS2_TX_DATA_OFFSET, c);
+		status = 0;
+	}
+
+	spin_unlock_irqrestore(&drvdata->lock, flags);
+
+	return status;
+}
+
+/*
+ * sxps2_open() is called when a port is open by the higher layer.
+ */
+static int sxps2_open(struct serio *pserio)
+{
+	struct xps2data *drvdata = pserio->port_data;
+	int retval;
+
+	retval = request_irq(drvdata->irq, &xps2_interrupt, 0,
+				DRIVER_NAME, drvdata);
+	if (retval) {
+		printk(KERN_ERR
+			"%s: Couldn't allocate interrupt %d\n",
+			drvdata->serio.name, drvdata->irq);
+		return retval;
+	}
+
+	/* start reception by enabling the interrupts */
+	out_be32(drvdata->base_address + XPS2_GIER_OFFSET, XPS2_GIER_GIE_MASK);
+	out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, XPS2_IPIXR_RX_ALL);
+	(void)xps2_recv(drvdata, &drvdata->rxb);
+
+	return 0;		/* success */
+}
+
+/*
+ * sxps2_close() frees the interrupt.
+ */
+static void sxps2_close(struct serio *pserio)
+{
+	struct xps2data *drvdata = pserio->port_data;
+
+	/* Disable the PS2 interrupts */
+	out_be32(drvdata->base_address + XPS2_GIER_OFFSET, 0x00);
+	out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0x00);
+	free_irq(drvdata->irq, drvdata);
+}
+
+/*********************/
+/* Device setup code */
+/*********************/
+
+static int xps2_setup(struct device *dev, struct resource *regs_res,
+		      struct resource *irq_res)
+{
+	struct xps2data *drvdata;
+	struct serio *serio;
+	unsigned long remap_size;
+	int retval;
+
+	if (!dev)
+		return -EINVAL;
+
+	if (!regs_res || !irq_res) {
+		dev_err(dev, "IO resource(s) not found\n");
+		return -EINVAL;
+	}
+
+	drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL);
+	if (!drvdata) {
+		dev_err(dev, "Couldn't allocate device private record\n");
+		return -ENOMEM;
+	}
+
+	dev_set_drvdata(dev, drvdata);
+
+	spin_lock_init(&drvdata->lock);
+	drvdata->irq = irq_res->start;
+
+	remap_size = regs_res->end - regs_res->start + 1;
+	if (!request_mem_region(regs_res->start, remap_size, DRIVER_NAME)) {
+		dev_err(dev, "Couldn't lock memory region at 0x%08X\n",
+			(unsigned int)regs_res->start);
+		retval = -EBUSY;
+		goto failed1;
+	}
+
+	/* Fill in configuration data and add them to the list */
+	drvdata->phys_addr = regs_res->start;
+	drvdata->remap_size = remap_size;
+	drvdata->base_address = ioremap(regs_res->start, remap_size);
+	if (drvdata->base_address == NULL) {
+		dev_err(dev, "Couldn't ioremap memory at 0x%08X\n",
+			(unsigned int)regs_res->start);
+		retval = -EFAULT;
+		goto failed2;
+	}
+
+	/* Disable all the interrupts, just in case */
+	out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0);
+
+	/* Reset the PS2 device and abort any current transaction, to make sure
+	 * we have the PS2 in a good state */
+	out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
+
+	dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%08X, irq=%d\n",
+		drvdata->phys_addr, (u32)drvdata->base_address, drvdata->irq);
+
+	serio = &drvdata->serio;
+	serio->id.type = SERIO_8042;
+	serio->write = sxps2_write;
+	serio->open = sxps2_open;
+	serio->close = sxps2_close;
+	serio->port_data = drvdata;
+	serio->dev.parent = dev;
+	snprintf(serio->name, sizeof(serio->name),
+		 "Xilinx XPS PS/2 at %08X", drvdata->phys_addr);
+	snprintf(serio->phys, sizeof(serio->phys),
+		 "xilinxps2/serio at %08X", drvdata->phys_addr);
+	serio_register_port(serio);
+
+	return 0;		/* success */
+
+failed2:
+	release_mem_region(regs_res->start, remap_size);
+failed1:
+	kfree(drvdata);
+	dev_set_drvdata(dev, NULL);
+
+	return retval;
+}
+
+/***************************/
+/* OF Platform Bus Support */
+/***************************/
+
+static int __devinit xps2_of_probe(struct of_device *ofdev, const struct
+				   of_device_id * match)
+{
+	struct resource r_irq; /* Interrupt resources */
+	struct resource r_mem; /* IO mem resources */
+	int rc = 0;
+
+	printk(KERN_INFO "Device Tree Probing \'%s\'\n",
+			ofdev->node->name);
+
+	/* Get iospace for the device */
+	rc = of_address_to_resource(ofdev->node, 0, &r_mem);
+	if (rc) {
+		dev_err(&ofdev->dev, "invalid address\n");
+		return rc;
+	}
+
+	/* Get IRQ for the device */
+	rc = of_irq_to_resource(ofdev->node, 0, &r_irq);
+	if (rc == NO_IRQ) {
+		dev_err(&ofdev->dev, "no IRQ found\n");
+		return rc;
+	}
+
+	return xps2_setup(&ofdev->dev, &r_mem, &r_irq);
+}
+
+static int __devexit xps2_of_remove(struct of_device *of_dev)
+{
+	struct device *dev = &of_dev->dev;
+	struct xps2data *drvdata;
+
+	if (!dev)
+		return -EINVAL;
+
+	drvdata = dev_get_drvdata(dev);
+
+	serio_unregister_port(&drvdata->serio);
+	iounmap(drvdata->base_address);
+	release_mem_region(drvdata->phys_addr, drvdata->remap_size);
+	kfree(drvdata);
+
+	dev_set_drvdata(dev, NULL);
+
+	return 0;		/* success */
+}
+
+/* Match table for of_platform binding */
+static struct of_device_id xps2_of_match[] __devinitdata = {
+	{ .compatible = "xlnx,xps-ps2-1.00.a", },
+	{ /* end of list */ },
+};
+MODULE_DEVICE_TABLE(of, xps2_of_match);
+
+static struct of_platform_driver xps2_of_driver = {
+	.name		= DRIVER_NAME,
+	.match_table	= xps2_of_match,
+	.probe		= xps2_of_probe,
+	.remove		= __devexit_p(xps2_of_remove),
+};
+
+static int __init xps2_init(void)
+{
+	return of_register_platform_driver(&xps2_of_driver);
+}
+
+static void __exit xps2_cleanup(void)
+{
+	of_unregister_platform_driver(&xps2_of_driver);
+}
+
+module_init(xps2_init);
+module_exit(xps2_cleanup);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx XPS PS/2 driver");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
index b973d0ef6d1..570e0e83ac4 100644
--- a/drivers/input/tablet/acecad.c
+++ b/drivers/input/tablet/acecad.c
@@ -73,10 +73,10 @@ static void usb_acecad_irq(struct urb *urb)
 		case -ENOENT:
 		case -ESHUTDOWN:
 			/* this urb is terminated, clean up */
-			dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+			dbg("%s - urb shutting down with status: %d", __func__, urb->status);
 			return;
 		default:
-			dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+			dbg("%s - nonzero urb status received: %d", __func__, urb->status);
 			goto resubmit;
 	}
 
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 55c1134d613..8f037a1d44a 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -449,12 +449,12 @@ static void aiptek_irq(struct urb *urb)
 	case -ESHUTDOWN:
 		/* This urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d",
-		    __FUNCTION__, urb->status);
+		    __func__, urb->status);
 		return;
 
 	default:
 		dbg("%s - nonzero urb status received: %d",
-		    __FUNCTION__, urb->status);
+		    __func__, urb->status);
 		goto exit;
 	}
 
@@ -813,7 +813,7 @@ exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval != 0) {
 		err("%s - usb_submit_urb failed with result %d",
-		    __FUNCTION__, retval);
+		    __func__, retval);
 	}
 }
 
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index 1e748e46d12..b9b7a98bc5a 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -863,7 +863,7 @@ static int gtco_probe(struct usb_interface *usbinterface,
 	gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL);
 	if (!gtco->urbinfo) {
 		err("Failed to allocate URB");
-		return -ENOMEM;
+		error = -ENOMEM;
 		goto err_free_buf;
 	}
 
diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c
index f23f5a97fb3..d89112fa6e6 100644
--- a/drivers/input/tablet/kbtab.c
+++ b/drivers/input/tablet/kbtab.c
@@ -56,10 +56,10 @@ static void kbtab_irq(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
 		goto exit;
 	}
 
@@ -88,7 +88,7 @@ static void kbtab_irq(struct urb *urb)
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
 	if (retval)
 		err ("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, retval);
+		     __func__, retval);
 }
 
 static struct usb_device_id kbtab_ids[] = {
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index 706619d06f7..ca62ec639f8 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -105,7 +105,7 @@ struct wacom {
 	struct urb *irq;
 	struct wacom_wac * wacom_wac;
 	struct mutex lock;
-	int open:1;
+	unsigned int open:1;
 	char phys[32];
 };
 
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 71cc0c14079..5fbc463baf5 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -56,10 +56,10 @@ static void wacom_sys_irq(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
 		goto exit;
 	}
 
@@ -74,7 +74,7 @@ static void wacom_sys_irq(struct urb *urb)
 	retval = usb_submit_urb (urb, GFP_ATOMIC);
 	if (retval)
 		err ("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, retval);
+		     __func__, retval);
 }
 
 void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 192513e1f04..bf3d9a8b2c1 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -56,7 +56,7 @@ static int wacom_penpartner_irq(struct wacom_wac *wacom, void *wcombo)
 static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
 {
 	unsigned char *data = wacom->data;
-	int prox, id, pressure;
+	int prox, pressure;
 
 	if (data[0] != 2) {
 		dbg("wacom_pl_irq: received unknown report #%d", data[0]);
@@ -65,7 +65,7 @@ static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
 
 	prox = data[1] & 0x40;
 
-	id = ERASER_DEVICE_ID;
+	wacom->id[0] = ERASER_DEVICE_ID;
 	if (prox) {
 
 		pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
@@ -99,10 +99,10 @@ static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
 		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
 			/* Unknown tool selected default to pen tool */
 			wacom->tool[1] = BTN_TOOL_PEN;
-			id = STYLUS_DEVICE_ID;
+			wacom->id[0] = STYLUS_DEVICE_ID;
 		}
 		wacom_report_key(wcombo, wacom->tool[1], prox); /* report in proximity for tool */
-		wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
 		wacom_report_abs(wcombo, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
 		wacom_report_abs(wcombo, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
 		wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
@@ -127,7 +127,6 @@ static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
 static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo)
 {
 	unsigned char *data = wacom->data;
-	int id;
 
 	if (data[0] != 2) {
 		printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
@@ -137,13 +136,13 @@ static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo)
 	if (data[1] & 0x04) {
 		wacom_report_key(wcombo, BTN_TOOL_RUBBER, data[1] & 0x20);
 		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x08);
-		id = ERASER_DEVICE_ID;
+		wacom->id[0] = ERASER_DEVICE_ID;
 	} else {
 		wacom_report_key(wcombo, BTN_TOOL_PEN, data[1] & 0x20);
 		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
-		id = STYLUS_DEVICE_ID;
+		wacom->id[0] = STYLUS_DEVICE_ID;
 	}
-	wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+	wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
 	wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
 	wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
 	wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
@@ -155,27 +154,26 @@ static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo)
 static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 {
 	unsigned char *data = wacom->data;
-	int x, y, id, rw;
+	int x, y, rw;
 
 	if (data[0] != 2) {
 		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
 		return 0;
 	}
 
-	id = STYLUS_DEVICE_ID;
-	if ((data[1] & 0x80) && ((data[1] & 0x07) || data[2] || data[3] || data[4]
-			|| data[5] || data[6] || (data[7] & 0x07))) {
+	if (data[1] & 0x80) {
 		/* in prox and not a pad data */
 
 		switch ((data[1] >> 5) & 3) {
 
 			case 0:	/* Pen */
 				wacom->tool[0] = BTN_TOOL_PEN;
+				wacom->id[0] = STYLUS_DEVICE_ID;
 				break;
 
 			case 1: /* Rubber */
 				wacom->tool[0] = BTN_TOOL_RUBBER;
-				id = ERASER_DEVICE_ID;
+				wacom->id[0] = ERASER_DEVICE_ID;
 				break;
 
 			case 2: /* Mouse with wheel */
@@ -190,7 +188,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 
 			case 3: /* Mouse without wheel */
 				wacom->tool[0] = BTN_TOOL_MOUSE;
-				id = CURSOR_DEVICE_ID;
+				wacom->id[0] = CURSOR_DEVICE_ID;
 				wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
 				wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
 				if (wacom->features->type == WACOM_G4 ||
@@ -210,9 +208,9 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
 			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
 		}
-		wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+		wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
 		wacom_report_key(wcombo, wacom->tool[0], 1);
-	} else if (!(data[1] & 0x90)) {
+	} else if (wacom->id[0]) {
 		wacom_report_abs(wcombo, ABS_X, 0);
 		wacom_report_abs(wcombo, ABS_Y, 0);
 		if (wacom->tool[0] == BTN_TOOL_MOUSE) {
@@ -225,6 +223,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 			wacom_report_key(wcombo, BTN_STYLUS, 0);
 			wacom_report_key(wcombo, BTN_STYLUS2, 0);
 		}
+		wacom->id[0] = 0;
 		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
 		wacom_report_key(wcombo, wacom->tool[0], 0);
 	}
@@ -234,13 +233,13 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 	    case WACOM_G4:
 		if (data[7] & 0xf8) {
 			wacom_input_sync(wcombo); /* sync last event */
-			wacom->id[1] = 1;
+			wacom->id[1] = PAD_DEVICE_ID;
 			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
 			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
 			rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
 			wacom_report_rel(wcombo, REL_WHEEL, rw);
 			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
-			wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
 			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
 		} else if (wacom->id[1]) {
 			wacom_input_sync(wcombo); /* sync last event */
@@ -255,14 +254,14 @@ static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
 	    case WACOM_MO:
 		if ((data[7] & 0xf8) || (data[8] & 0xff)) {
 			wacom_input_sync(wcombo); /* sync last event */
-			wacom->id[1] = 1;
+			wacom->id[1] = PAD_DEVICE_ID;
 			wacom_report_key(wcombo, BTN_0, (data[7] & 0x08));
 			wacom_report_key(wcombo, BTN_1, (data[7] & 0x20));
 			wacom_report_key(wcombo, BTN_4, (data[7] & 0x10));
 			wacom_report_key(wcombo, BTN_5, (data[7] & 0x40));
 			wacom_report_abs(wcombo, ABS_WHEEL, (data[8] & 0x7f));
 			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
-			wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+			wacom_report_abs(wcombo, ABS_MISC, wacom->id[1]);
 			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
 		} else if (wacom->id[1]) {
 			wacom_input_sync(wcombo); /* sync last event */
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 565ec711c2e..e5736652157 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -103,6 +103,18 @@ config TOUCHSCREEN_MTOUCH
 	  To compile this driver as a module, choose M here: the
 	  module will be called mtouch.
 
+config TOUCHSCREEN_INEXIO
+	tristate "iNexio serial touchscreens"
+	select SERIO
+	help
+	  Say Y here if you have an iNexio serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called inexio.
+
 config TOUCHSCREEN_MK712
 	tristate "ICS MicroClock MK712 touchscreen"
 	help
@@ -134,6 +146,18 @@ config TOUCHSCREEN_HP7XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called jornada720_ts.
 
+config TOUCHSCREEN_HTCPEN
+	tristate "HTC Shift X9500 touchscreen"
+	depends on ISA
+	help
+	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
+	  Clio / Shangrila and want to support the built-in touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called htcpen.
+
 config TOUCHSCREEN_PENMOUNT
 	tristate "Penmount serial touchscreen"
 	select SERIO
@@ -146,6 +170,17 @@ config TOUCHSCREEN_PENMOUNT
 	  To compile this driver as a module, choose M here: the
 	  module will be called penmount.
 
+config TOUCHSCREEN_MIGOR
+	tristate "Renesas MIGO-R touchscreen"
+	depends on SH_MIGOR && I2C
+	help
+	  Say Y here to enable MIGO-R touchscreen support.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called migor_ts.
+
 config TOUCHSCREEN_TOUCHRIGHT
 	tristate "Touchright serial touchscreen"
 	select SERIO
@@ -316,4 +351,15 @@ config TOUCHSCREEN_USB_GOTOP
 	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
 	depends on TOUCHSCREEN_USB_COMPOSITE
 
+config TOUCHSCREEN_TOUCHIT213
+	tristate "Sahara TouchIT-213 touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called touchit213.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 3c096d75651..39a804cd80f 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -12,12 +12,16 @@ obj-$(CONFIG_TOUCHSCREEN_CORGI)		+= corgi_ts.o
 obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
+obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
+obj-$(CONFIG_TOUCHSCREEN_MIGOR)		+= migor_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MTOUCH)	+= mtouch.o
 obj-$(CONFIG_TOUCHSCREEN_MK712)		+= mk712.o
 obj-$(CONFIG_TOUCHSCREEN_HP600)		+= hp680_ts_input.o
 obj-$(CONFIG_TOUCHSCREEN_HP7XX)		+= jornada720_ts.o
+obj-$(CONFIG_TOUCHSCREEN_HTCPEN)	+= htcpen.o
 obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)	+= usbtouchscreen.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
+obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
 obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c
index a48a15868c4..a54f90e02ab 100644
--- a/drivers/input/touchscreen/gunze.c
+++ b/drivers/input/touchscreen/gunze.c
@@ -1,6 +1,4 @@
 /*
- * $Id: gunze.c,v 1.12 2001/09/25 10:12:07 vojtech Exp $
- *
  *  Copyright (c) 2000-2001 Vojtech Pavlik
  */
 
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index 28ae15ed12c..4f86081dc7f 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -1,6 +1,4 @@
 /*
- * $Id: h3600_ts_input.c,v 1.4 2002/01/23 06:39:37 jsimmons Exp $
- *
  *  Copyright (c) 2001 "Crazy" James Simmons jsimmons@transvirtual.com
  *
  *  Sponsored by Transvirtual Technology.
diff --git a/drivers/input/touchscreen/htcpen.c b/drivers/input/touchscreen/htcpen.c
new file mode 100644
index 00000000000..62811de6f18
--- /dev/null
+++ b/drivers/input/touchscreen/htcpen.c
@@ -0,0 +1,255 @@
+/*
+ * HTC Shift touchscreen driver
+ *
+ * Copyright (C) 2008 Pau Oliva Fora <pof@eslack.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/isa.h>
+#include <linux/ioport.h>
+#include <linux/dmi.h>
+
+MODULE_AUTHOR("Pau Oliva Fora <pau@eslack.org>");
+MODULE_DESCRIPTION("HTC Shift touchscreen driver");
+MODULE_LICENSE("GPL");
+
+#define HTCPEN_PORT_IRQ_CLEAR	0x068
+#define HTCPEN_PORT_INIT	0x06c
+#define HTCPEN_PORT_INDEX	0x0250
+#define HTCPEN_PORT_DATA	0x0251
+#define HTCPEN_IRQ		3
+
+#define DEVICE_ENABLE		0xa2
+#define DEVICE_DISABLE		0xa3
+
+#define X_INDEX			3
+#define Y_INDEX			5
+#define TOUCH_INDEX		0xb
+#define LSB_XY_INDEX		0xc
+#define X_AXIS_MAX		2040
+#define Y_AXIS_MAX		2040
+
+static int invert_x;
+module_param(invert_x, bool, 0644);
+MODULE_PARM_DESC(invert_x, "If set, X axis is inverted");
+static int invert_y;
+module_param(invert_y, bool, 0644);
+MODULE_PARM_DESC(invert_y, "If set, Y axis is inverted");
+
+static struct pnp_device_id pnp_ids[] = {
+	{ .id = "PNP0cc0" },
+	{ .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, pnp_ids);
+
+static irqreturn_t htcpen_interrupt(int irq, void *handle)
+{
+	struct input_dev *htcpen_dev = handle;
+	unsigned short x, y, xy;
+
+	/* 0 = press; 1 = release */
+	outb_p(TOUCH_INDEX, HTCPEN_PORT_INDEX);
+
+	if (inb_p(HTCPEN_PORT_DATA)) {
+		input_report_key(htcpen_dev, BTN_TOUCH, 0);
+	} else {
+		outb_p(X_INDEX, HTCPEN_PORT_INDEX);
+		x = inb_p(HTCPEN_PORT_DATA);
+
+		outb_p(Y_INDEX, HTCPEN_PORT_INDEX);
+		y = inb_p(HTCPEN_PORT_DATA);
+
+		outb_p(LSB_XY_INDEX, HTCPEN_PORT_INDEX);
+		xy = inb_p(HTCPEN_PORT_DATA);
+
+		/* get high resolution value of X and Y using LSB */
+		x = X_AXIS_MAX - ((x * 8) + ((xy >> 4) & 0xf));
+		y = (y * 8) + (xy & 0xf);
+		if (invert_x)
+			x = X_AXIS_MAX - x;
+		if (invert_y)
+			y = Y_AXIS_MAX - y;
+
+		if (x != X_AXIS_MAX && x != 0) {
+			input_report_key(htcpen_dev, BTN_TOUCH, 1);
+			input_report_abs(htcpen_dev, ABS_X, x);
+			input_report_abs(htcpen_dev, ABS_Y, y);
+		}
+	}
+
+	input_sync(htcpen_dev);
+
+	inb_p(HTCPEN_PORT_IRQ_CLEAR);
+
+	return IRQ_HANDLED;
+}
+
+static int htcpen_open(struct input_dev *dev)
+{
+	outb_p(DEVICE_ENABLE, HTCPEN_PORT_INIT);
+
+	return 0;
+}
+
+static void htcpen_close(struct input_dev *dev)
+{
+	outb_p(DEVICE_DISABLE, HTCPEN_PORT_INIT);
+	synchronize_irq(HTCPEN_IRQ);
+}
+
+static int __devinit htcpen_isa_probe(struct device *dev, unsigned int id)
+{
+	struct input_dev *htcpen_dev;
+	int err = -EBUSY;
+
+	if (!request_region(HTCPEN_PORT_IRQ_CLEAR, 1, "htcpen")) {
+		printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n",
+			HTCPEN_PORT_IRQ_CLEAR);
+		goto request_region1_failed;
+	}
+
+	if (!request_region(HTCPEN_PORT_INIT, 1, "htcpen")) {
+		printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n",
+			HTCPEN_PORT_INIT);
+		goto request_region2_failed;
+	}
+
+	if (!request_region(HTCPEN_PORT_INDEX, 2, "htcpen")) {
+		printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n",
+			HTCPEN_PORT_INDEX);
+		goto request_region3_failed;
+	}
+
+	htcpen_dev = input_allocate_device();
+	if (!htcpen_dev) {
+		printk(KERN_ERR "htcpen: can't allocate device\n");
+		err = -ENOMEM;
+		goto input_alloc_failed;
+	}
+
+	htcpen_dev->name = "HTC Shift EC TouchScreen";
+	htcpen_dev->id.bustype = BUS_ISA;
+
+	htcpen_dev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
+	htcpen_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(htcpen_dev, ABS_X, 0, X_AXIS_MAX, 0, 0);
+	input_set_abs_params(htcpen_dev, ABS_Y, 0, Y_AXIS_MAX, 0, 0);
+
+	htcpen_dev->open = htcpen_open;
+	htcpen_dev->close = htcpen_close;
+
+	err = request_irq(HTCPEN_IRQ, htcpen_interrupt, 0, "htcpen",
+			htcpen_dev);
+	if (err) {
+		printk(KERN_ERR "htcpen: irq busy\n");
+		goto request_irq_failed;
+	}
+
+	inb_p(HTCPEN_PORT_IRQ_CLEAR);
+
+	err = input_register_device(htcpen_dev);
+	if (err)
+		goto input_register_failed;
+
+	dev_set_drvdata(dev, htcpen_dev);
+
+	return 0;
+
+ input_register_failed:
+	free_irq(HTCPEN_IRQ, htcpen_dev);
+ request_irq_failed:
+	input_free_device(htcpen_dev);
+ input_alloc_failed:
+	release_region(HTCPEN_PORT_INDEX, 2);
+ request_region3_failed:
+	release_region(HTCPEN_PORT_INIT, 1);
+ request_region2_failed:
+	release_region(HTCPEN_PORT_IRQ_CLEAR, 1);
+ request_region1_failed:
+	return err;
+}
+
+static int __devexit htcpen_isa_remove(struct device *dev, unsigned int id)
+{
+	struct input_dev *htcpen_dev = dev_get_drvdata(dev);
+
+	input_unregister_device(htcpen_dev);
+
+	free_irq(HTCPEN_IRQ, htcpen_dev);
+
+	release_region(HTCPEN_PORT_INDEX, 2);
+	release_region(HTCPEN_PORT_INIT, 1);
+	release_region(HTCPEN_PORT_IRQ_CLEAR, 1);
+
+	dev_set_drvdata(dev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int htcpen_isa_suspend(struct device *dev, unsigned int n,
+				pm_message_t state)
+{
+	outb_p(DEVICE_DISABLE, HTCPEN_PORT_INIT);
+
+	return 0;
+}
+
+static int htcpen_isa_resume(struct device *dev, unsigned int n)
+{
+	outb_p(DEVICE_ENABLE, HTCPEN_PORT_INIT);
+
+	return 0;
+}
+#endif
+
+static struct isa_driver htcpen_isa_driver = {
+	.probe		= htcpen_isa_probe,
+	.remove		= __devexit_p(htcpen_isa_remove),
+#ifdef CONFIG_PM
+	.suspend	= htcpen_isa_suspend,
+	.resume		= htcpen_isa_resume,
+#endif
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "htcpen",
+	}
+};
+
+static struct dmi_system_id __initdata htcshift_dmi_table[] = {
+	{
+		.ident = "Shift",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "High Tech Computer Corp"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Shift"),
+		},
+	},
+	{ }
+};
+
+static int __init htcpen_isa_init(void)
+{
+	if (!dmi_check_system(htcshift_dmi_table))
+		return -ENODEV;
+
+	return isa_register_driver(&htcpen_isa_driver, 1);
+}
+
+static void __exit htcpen_isa_exit(void)
+{
+	isa_unregister_driver(&htcpen_isa_driver);
+}
+
+module_init(htcpen_isa_init);
+module_exit(htcpen_isa_exit);
diff --git a/drivers/input/touchscreen/inexio.c b/drivers/input/touchscreen/inexio.c
new file mode 100644
index 00000000000..192ade0a0fb
--- /dev/null
+++ b/drivers/input/touchscreen/inexio.c
@@ -0,0 +1,207 @@
+/*
+ * iNexio serial touchscreen driver
+ *
+ * Copyright (c) 2008 Richard Lemon
+ * Based on the mtouch driver (c) Vojtech Pavlik and Dan Streetman
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2008/06/19 Richard Lemon <richard@codelemon.com>
+ *   Copied mtouch.c and edited for iNexio protocol
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"iNexio serial touchscreen driver"
+
+MODULE_AUTHOR("Richard Lemon <richard@codelemon.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define INEXIO_FORMAT_TOUCH_BIT 0x01
+#define INEXIO_FORMAT_LENGTH 5
+#define INEXIO_RESPONSE_BEGIN_BYTE 0x80
+
+/* todo: check specs for max length of all responses */
+#define INEXIO_MAX_LENGTH 16
+
+#define INEXIO_MIN_XC 0
+#define INEXIO_MAX_XC 0x3fff
+#define INEXIO_MIN_YC 0
+#define INEXIO_MAX_YC 0x3fff
+
+#define INEXIO_GET_XC(data) (((data[1])<<7) | data[2])
+#define INEXIO_GET_YC(data) (((data[3])<<7) | data[4])
+#define INEXIO_GET_TOUCHED(data) (INEXIO_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct inexio {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[INEXIO_MAX_LENGTH];
+	char phys[32];
+};
+
+static void inexio_process_data(struct inexio *pinexio)
+{
+	struct input_dev *dev = pinexio->dev;
+
+	if (INEXIO_FORMAT_LENGTH == ++pinexio->idx) {
+		input_report_abs(dev, ABS_X, INEXIO_GET_XC(pinexio->data));
+		input_report_abs(dev, ABS_Y, INEXIO_GET_YC(pinexio->data));
+		input_report_key(dev, BTN_TOUCH, INEXIO_GET_TOUCHED(pinexio->data));
+		input_sync(dev);
+
+		pinexio->idx = 0;
+	}
+}
+
+static irqreturn_t inexio_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct inexio* pinexio = serio_get_drvdata(serio);
+
+	pinexio->data[pinexio->idx] = data;
+
+	if (INEXIO_RESPONSE_BEGIN_BYTE&pinexio->data[0])
+		inexio_process_data(pinexio);
+	else
+		printk(KERN_DEBUG "inexio.c: unknown/unsynchronized data from device, byte %x\n",pinexio->data[0]);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * inexio_disconnect() is the opposite of inexio_connect()
+ */
+
+static void inexio_disconnect(struct serio *serio)
+{
+	struct inexio* pinexio = serio_get_drvdata(serio);
+
+	input_get_device(pinexio->dev);
+	input_unregister_device(pinexio->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(pinexio->dev);
+	kfree(pinexio);
+}
+
+/*
+ * inexio_connect() is the routine that is called when someone adds a
+ * new serio device that supports iNexio protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int inexio_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct inexio *pinexio;
+	struct input_dev *input_dev;
+	int err;
+
+	pinexio = kzalloc(sizeof(struct inexio), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!pinexio || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	pinexio->serio = serio;
+	pinexio->dev = input_dev;
+	snprintf(pinexio->phys, sizeof(pinexio->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "iNexio Serial TouchScreen";
+	input_dev->phys = pinexio->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_INEXIO;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0001;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(pinexio->dev, ABS_X, INEXIO_MIN_XC, INEXIO_MAX_XC, 0, 0);
+	input_set_abs_params(pinexio->dev, ABS_Y, INEXIO_MIN_YC, INEXIO_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, pinexio);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(pinexio->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(pinexio);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id inexio_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_INEXIO,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, inexio_serio_ids);
+
+static struct serio_driver inexio_drv = {
+	.driver		= {
+		.name	= "inexio",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= inexio_serio_ids,
+	.interrupt	= inexio_interrupt,
+	.connect	= inexio_connect,
+	.disconnect	= inexio_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init inexio_init(void)
+{
+	return serio_register_driver(&inexio_drv);
+}
+
+static void __exit inexio_exit(void)
+{
+	serio_unregister_driver(&inexio_drv);
+}
+
+module_init(inexio_init);
+module_exit(inexio_exit);
diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c
new file mode 100644
index 00000000000..c1cd99d5898
--- /dev/null
+++ b/drivers/input/touchscreen/migor_ts.c
@@ -0,0 +1,250 @@
+/*
+ * Touch Screen driver for Renesas MIGO-R Platform
+ *
+ * Copyright (c) 2008 Magnus Damm
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *  Kenati Technologies Pvt Ltd.
+ *
+ * This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU  General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <linux/i2c.h>
+#include <linux/timer.h>
+
+#define EVENT_PENDOWN 1
+#define EVENT_REPEAT  2
+#define EVENT_PENUP   3
+
+struct migor_ts_priv {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct delayed_work work;
+	int irq;
+};
+
+static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11,
+					       0x01, 0x06, 0x07, };
+static const u_int8_t migor_ts_dis_seq[17] = { };
+
+static void migor_ts_poscheck(struct work_struct *work)
+{
+	struct migor_ts_priv *priv = container_of(work,
+						  struct migor_ts_priv,
+						  work.work);
+	unsigned short xpos, ypos;
+	unsigned char event;
+	u_int8_t buf[16];
+
+	memset(buf, 0, sizeof(buf));
+
+	/* Set Index 0 */
+	buf[0] = 0;
+	if (i2c_master_send(priv->client, buf, 1) != 1) {
+		dev_err(&priv->client->dev, "Unable to write i2c index\n");
+		goto out;
+	}
+
+	/* Now do Page Read */
+	if (i2c_master_recv(priv->client, buf, sizeof(buf)) != sizeof(buf)) {
+		dev_err(&priv->client->dev, "Unable to read i2c page\n");
+		goto out;
+	}
+
+	ypos = ((buf[9] & 0x03) << 8 | buf[8]);
+	xpos = ((buf[11] & 0x03) << 8 | buf[10]);
+	event = buf[12];
+
+	if (event == EVENT_PENDOWN || event == EVENT_REPEAT) {
+		input_report_key(priv->input, BTN_TOUCH, 1);
+		input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/
+		input_report_abs(priv->input, ABS_Y, xpos);
+		input_sync(priv->input);
+	} else if (event == EVENT_PENUP) {
+		input_report_key(priv->input, BTN_TOUCH, 0);
+		input_sync(priv->input);
+	}
+ out:
+	enable_irq(priv->irq);
+}
+
+static irqreturn_t migor_ts_isr(int irq, void *dev_id)
+{
+	struct migor_ts_priv *priv = dev_id;
+
+	/* the touch screen controller chip is hooked up to the cpu
+	 * using i2c and a single interrupt line. the interrupt line
+	 * is pulled low whenever someone taps the screen. to deassert
+	 * the interrupt line we need to acknowledge the interrupt by
+	 * communicating with the controller over the slow i2c bus.
+	 *
+	 * we can't acknowledge from interrupt context since the i2c
+	 * bus controller may sleep, so we just disable the interrupt
+	 * here and handle the acknowledge using delayed work.
+	 */
+
+	disable_irq_nosync(irq);
+	schedule_delayed_work(&priv->work, HZ / 20);
+
+	return IRQ_HANDLED;
+}
+
+
+static int migor_ts_open(struct input_dev *dev)
+{
+	struct migor_ts_priv *priv = input_get_drvdata(dev);
+	struct i2c_client *client = priv->client;
+	int count;
+
+	/* enable controller */
+	count = i2c_master_send(client, migor_ts_ena_seq,
+				sizeof(migor_ts_ena_seq));
+	if (count != sizeof(migor_ts_ena_seq)) {
+		dev_err(&client->dev, "Unable to enable touchscreen.\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static void migor_ts_close(struct input_dev *dev)
+{
+	struct migor_ts_priv *priv = input_get_drvdata(dev);
+	struct i2c_client *client = priv->client;
+
+	disable_irq(priv->irq);
+
+	/* cancel pending work and wait for migor_ts_poscheck() to finish */
+	if (cancel_delayed_work_sync(&priv->work)) {
+		/*
+		 * if migor_ts_poscheck was canceled we need to enable IRQ
+		 * here to balance disable done in migor_ts_isr.
+		 */
+		enable_irq(priv->irq);
+	}
+
+	/* disable controller */
+	i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq));
+
+	enable_irq(priv->irq);
+}
+
+static int migor_ts_probe(struct i2c_client *client,
+			  const struct i2c_device_id *idp)
+{
+	struct migor_ts_priv *priv;
+	struct input_dev *input;
+	int error;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&client->dev, "failed to allocate driver data\n");
+		error = -ENOMEM;
+		goto err0;
+	}
+
+	dev_set_drvdata(&client->dev, priv);
+
+	input = input_allocate_device();
+	if (!input) {
+		dev_err(&client->dev, "Failed to allocate input device.\n");
+		error = -ENOMEM;
+		goto err1;
+	}
+
+	input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input, ABS_X, 95, 955, 0, 0);
+	input_set_abs_params(input, ABS_Y, 85, 935, 0, 0);
+
+	input->name = client->driver_name;
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+
+	input->open = migor_ts_open;
+	input->close = migor_ts_close;
+
+	input_set_drvdata(input, priv);
+
+	priv->client = client;
+	priv->input = input;
+	INIT_DELAYED_WORK(&priv->work, migor_ts_poscheck);
+	priv->irq = client->irq;
+
+	error = input_register_device(input);
+	if (error)
+		goto err1;
+
+	error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW,
+			    client->driver_name, priv);
+	if (error) {
+		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
+		goto err2;
+	}
+
+	return 0;
+
+ err2:
+	input_unregister_device(input);
+	input = NULL; /* so we dont try to free it below */
+ err1:
+	input_free_device(input);
+	kfree(priv);
+ err0:
+	dev_set_drvdata(&client->dev, NULL);
+	return error;
+}
+
+static int migor_ts_remove(struct i2c_client *client)
+{
+	struct migor_ts_priv *priv = dev_get_drvdata(&client->dev);
+
+	free_irq(priv->irq, priv);
+	input_unregister_device(priv->input);
+	kfree(priv);
+
+	dev_set_drvdata(&client->dev, NULL);
+
+	return 0;
+}
+
+static struct i2c_driver migor_ts_driver = {
+	.driver = {
+		.name = "migor_ts",
+	},
+	.probe = migor_ts_probe,
+	.remove = migor_ts_remove,
+};
+
+static int __init migor_ts_init(void)
+{
+	return i2c_add_driver(&migor_ts_driver);
+}
+
+static void __exit migor_ts_exit(void)
+{
+	i2c_del_driver(&migor_ts_driver);
+}
+
+MODULE_DESCRIPTION("MigoR Touchscreen driver");
+MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
+MODULE_LICENSE("GPL");
+
+module_init(migor_ts_init);
+module_exit(migor_ts_exit);
diff --git a/drivers/input/touchscreen/touchit213.c b/drivers/input/touchscreen/touchit213.c
new file mode 100644
index 00000000000..d1297ba19da
--- /dev/null
+++ b/drivers/input/touchscreen/touchit213.c
@@ -0,0 +1,234 @@
+/*
+ * Sahara TouchIT-213 serial touchscreen driver
+ *
+ * Copyright (c) 2007-2008 Claudio Nieder <private@claudio.ch>
+ *
+ * Based on Touchright driver (drivers/input/touchscreen/touchright.c)
+ * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
+ * Copyright (c) 2004 Vojtech Pavlik
+ * and Dan Streetman <ddstreet@ieee.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"Sahara TouchIT-213 serial touchscreen driver"
+
+MODULE_AUTHOR("Claudio Nieder <private@claudio.ch>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+/*
+ * Data is received through COM1 at 9600bit/s,8bit,no parity in packets
+ * of 5 byte each.
+ *
+ *   +--------+   +--------+   +--------+   +--------+   +--------+
+ *   |1000000p|   |0xxxxxxx|   |0xxxxxxx|   |0yyyyyyy|   |0yyyyyyy|
+ *   +--------+   +--------+   +--------+   +--------+   +--------+
+ *                    MSB          LSB          MSB          LSB
+ *
+ * The value of p is 1 as long as the screen is touched and 0 when
+ * reporting the location where touching stopped, e.g. where the pen was
+ * lifted from the screen.
+ *
+ * When holding the screen in landscape mode as the BIOS text output is
+ * presented, x is the horizontal axis with values growing from left to
+ * right and y is the vertical axis with values growing from top to
+ * bottom.
+ *
+ * When holding the screen in portrait mode with the Sahara logo in its
+ * correct position, x ist the vertical axis with values growing from
+ * top to bottom and y is the horizontal axis with values growing from
+ * right to left.
+ */
+
+#define T213_FORMAT_TOUCH_BIT	0x01
+#define T213_FORMAT_STATUS_BYTE	0x80
+#define T213_FORMAT_STATUS_MASK	~T213_FORMAT_TOUCH_BIT
+
+/*
+ * On my Sahara Touch-IT 213 I have observed x values from 0 to 0x7f0
+ * and y values from 0x1d to 0x7e9, so the actual measurement is
+ * probably done with an 11 bit precision.
+ */
+#define T213_MIN_XC 0
+#define T213_MAX_XC 0x07ff
+#define T213_MIN_YC 0
+#define T213_MAX_YC 0x07ff
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct touchit213 {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char csum;
+	unsigned char data[5];
+	char phys[32];
+};
+
+static irqreturn_t touchit213_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct touchit213 *touchit213 = serio_get_drvdata(serio);
+	struct input_dev *dev = touchit213->dev;
+
+	touchit213->data[touchit213->idx] = data;
+
+	switch (touchit213->idx++) {
+	case 0:
+		if ((touchit213->data[0] & T213_FORMAT_STATUS_MASK) !=
+				T213_FORMAT_STATUS_BYTE) {
+			pr_debug("unsynchronized data: 0x%02x\n", data);
+			touchit213->idx = 0;
+		}
+		break;
+
+	case 4:
+		touchit213->idx = 0;
+		input_report_abs(dev, ABS_X,
+			(touchit213->data[1] << 7) | touchit213->data[2]);
+		input_report_abs(dev, ABS_Y,
+			(touchit213->data[3] << 7) | touchit213->data[4]);
+		input_report_key(dev, BTN_TOUCH,
+			touchit213->data[0] & T213_FORMAT_TOUCH_BIT);
+		input_sync(dev);
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * touchit213_disconnect() is the opposite of touchit213_connect()
+ */
+
+static void touchit213_disconnect(struct serio *serio)
+{
+	struct touchit213 *touchit213 = serio_get_drvdata(serio);
+
+	input_get_device(touchit213->dev);
+	input_unregister_device(touchit213->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(touchit213->dev);
+	kfree(touchit213);
+}
+
+/*
+ * touchit213_connect() is the routine that is called when someone adds a
+ * new serio device that supports the Touchright protocol and registers it as
+ * an input device.
+ */
+
+static int touchit213_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct touchit213 *touchit213;
+	struct input_dev *input_dev;
+	int err;
+
+	touchit213 = kzalloc(sizeof(struct touchit213), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!touchit213 || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	touchit213->serio = serio;
+	touchit213->dev = input_dev;
+	snprintf(touchit213->phys, sizeof(touchit213->phys),
+		 "%s/input0", serio->phys);
+
+	input_dev->name = "Sahara Touch-iT213 Serial TouchScreen";
+	input_dev->phys = touchit213->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_TOUCHIT213;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(touchit213->dev, ABS_X,
+			     T213_MIN_XC, T213_MAX_XC, 0, 0);
+	input_set_abs_params(touchit213->dev, ABS_Y,
+			     T213_MIN_YC, T213_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, touchit213);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(touchit213->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(touchit213);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id touchit213_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_TOUCHIT213,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, touchit213_serio_ids);
+
+static struct serio_driver touchit213_drv = {
+	.driver		= {
+		.name	= "touchit213",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= touchit213_serio_ids,
+	.interrupt	= touchit213_interrupt,
+	.connect	= touchit213_connect,
+	.disconnect	= touchit213_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init touchit213_init(void)
+{
+	return serio_register_driver(&touchit213_drv);
+}
+
+static void __exit touchit213_exit(void)
+{
+	serio_unregister_driver(&touchit213_drv);
+}
+
+module_init(touchit213_init);
+module_exit(touchit213_exit);
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index 3a0a8ca5707..fdd645c214a 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -49,6 +49,7 @@
 #include <linux/init.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
+#include <linux/hid.h>
 
 
 #define DRIVER_VERSION		"v0.6"
@@ -101,7 +102,7 @@ struct usbtouch_usb {
 
 /* device types */
 enum {
-	DEVTPYE_DUMMY = -1,
+	DEVTYPE_IGNORE = -1,
 	DEVTYPE_EGALAX,
 	DEVTYPE_PANJIT,
 	DEVTYPE_3M,
@@ -115,8 +116,21 @@ enum {
 	DEVTYPE_GOTOP,
 };
 
+#define USB_DEVICE_HID_CLASS(vend, prod) \
+	.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
+		| USB_DEVICE_ID_MATCH_DEVICE, \
+	.idVendor = (vend), \
+	.idProduct = (prod), \
+	.bInterfaceClass = USB_INTERFACE_CLASS_HID, \
+	.bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE
+
 static struct usb_device_id usbtouch_devices[] = {
 #ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
+	/* ignore the HID capable devices, handled by usbhid */
+	{USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE},
+	{USB_DEVICE_HID_CLASS(0x0eef, 0x0002), .driver_info = DEVTYPE_IGNORE},
+
+	/* normal device IDs */
 	{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
 	{USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
 	{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
@@ -262,7 +276,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
 	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 	                      1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
 	dbg("%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d",
-	    __FUNCTION__, ret);
+	    __func__, ret);
 	if (ret < 0)
 		return ret;
 	msleep(150);
@@ -273,7 +287,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
 				      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				      1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
 		dbg("%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d",
-		    __FUNCTION__, ret);
+		    __func__, ret);
 		if (ret >= 0)
 			break;
 		if (ret != -EPIPE)
@@ -793,18 +807,18 @@ static void usbtouch_irq(struct urb *urb)
 	case -ETIME:
 		/* this urb is timing out */
 		dbg("%s - urb timed out - was the device unplugged?",
-		    __FUNCTION__);
+		    __func__);
 		return;
 	case -ECONNRESET:
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d",
-		    __FUNCTION__, urb->status);
+		    __func__, urb->status);
 		return;
 	default:
 		dbg("%s - nonzero urb status received: %d",
-		    __FUNCTION__, urb->status);
+		    __func__, urb->status);
 		goto exit;
 	}
 
@@ -814,7 +828,7 @@ exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
 		err("%s - usb_submit_urb failed with result: %d",
-		    __FUNCTION__, retval);
+		    __func__, retval);
 }
 
 static int usbtouch_open(struct input_dev *input)
@@ -857,6 +871,10 @@ static int usbtouch_probe(struct usb_interface *intf,
 	struct usbtouch_device_info *type;
 	int err = -ENOMEM;
 
+	/* some devices are ignored */
+	if (id->driver_info == DEVTYPE_IGNORE)
+		return -ENODEV;
+
 	interface = intf->cur_altsetting;
 	endpoint = &interface->endpoint[0].desc;
 
@@ -883,7 +901,7 @@ static int usbtouch_probe(struct usb_interface *intf,
 
 	usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
 	if (!usbtouch->irq) {
-		dbg("%s - usb_alloc_urb failed: usbtouch->irq", __FUNCTION__);
+		dbg("%s - usb_alloc_urb failed: usbtouch->irq", __func__);
 		goto out_free_buffers;
 	}
 
@@ -939,14 +957,14 @@ static int usbtouch_probe(struct usb_interface *intf,
 	if (type->init) {
 		err = type->init(usbtouch);
 		if (err) {
-			dbg("%s - type->init() failed, err: %d", __FUNCTION__, err);
+			dbg("%s - type->init() failed, err: %d", __func__, err);
 			goto out_free_buffers;
 		}
 	}
 
 	err = input_register_device(usbtouch->input);
 	if (err) {
-		dbg("%s - input_register_device failed, err: %d", __FUNCTION__, err);
+		dbg("%s - input_register_device failed, err: %d", __func__, err);
 		goto out_free_buffers;
 	}
 
@@ -966,12 +984,12 @@ static void usbtouch_disconnect(struct usb_interface *intf)
 {
 	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
 
-	dbg("%s - called", __FUNCTION__);
+	dbg("%s - called", __func__);
 
 	if (!usbtouch)
 		return;
 
-	dbg("%s - usbtouch is initialized, cleaning up", __FUNCTION__);
+	dbg("%s - usbtouch is initialized, cleaning up", __func__);
 	usb_set_intfdata(intf, NULL);
 	usb_kill_urb(usbtouch->irq);
 	input_unregister_device(usbtouch->input);
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index 0b6e4cfa6a2..4c5d85a249a 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -168,6 +168,18 @@ static void wm9712_phy_init(struct wm97xx *wm)
 			64000 / rpu);
 	}
 
+	/* WM9712 five wire */
+	if (five_wire) {
+		dig2 |= WM9712_45W;
+		dev_dbg(wm->dev, "setting 5-wire touchscreen mode.");
+
+		if (pil) {
+			dev_warn(wm->dev, "pressure measurement is not "
+				 "supported in 5-wire mode\n");
+			pil = 0;
+		}
+	}
+
 	/* touchpanel pressure current*/
 	if (pil == 2) {
 		dig2 |= WM9712_PIL;
@@ -179,12 +191,6 @@ static void wm9712_phy_init(struct wm97xx *wm)
 	if (!pil)
 		pressure = 0;
 
-	/* WM9712 five wire */
-	if (five_wire) {
-		dig2 |= WM9712_45W;
-		dev_dbg(wm->dev, "setting 5-wire touchscreen mode.");
-	}
-
 	/* polling mode sample settling delay */
 	if (delay < 0 || delay > 15) {
 		dev_dbg(wm->dev, "supplied delay out of range.");
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index 0f47f4697cd..9ce3b3baf3a 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -66,6 +66,9 @@ static irqreturn_t input_handler(int rq, void *dev_id)
 		case XENKBD_TYPE_MOTION:
 			input_report_rel(dev, REL_X, event->motion.rel_x);
 			input_report_rel(dev, REL_Y, event->motion.rel_y);
+			if (event->motion.rel_z)
+				input_report_rel(dev, REL_WHEEL,
+						 -event->motion.rel_z);
 			break;
 		case XENKBD_TYPE_KEY:
 			dev = NULL;
@@ -84,6 +87,9 @@ static irqreturn_t input_handler(int rq, void *dev_id)
 		case XENKBD_TYPE_POS:
 			input_report_abs(dev, ABS_X, event->pos.abs_x);
 			input_report_abs(dev, ABS_Y, event->pos.abs_y);
+			if (event->pos.rel_z)
+				input_report_rel(dev, REL_WHEEL,
+						 -event->pos.rel_z);
 			break;
 		}
 		if (dev)
@@ -152,7 +158,7 @@ static int __devinit xenkbd_probe(struct xenbus_device *dev,
 	ptr->evbit[0] = BIT(EV_KEY) | BIT(EV_REL) | BIT(EV_ABS);
 	for (i = BTN_LEFT; i <= BTN_TASK; i++)
 		set_bit(i, ptr->keybit);
-	ptr->relbit[0] = BIT(REL_X) | BIT(REL_Y);
+	ptr->relbit[0] = BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL);
 	input_set_abs_params(ptr, ABS_X, 0, XENFB_WIDTH, 0, 0);
 	input_set_abs_params(ptr, ABS_Y, 0, XENFB_HEIGHT, 0, 0);
 
@@ -294,6 +300,16 @@ InitWait:
 		 */
 		if (dev->state != XenbusStateConnected)
 			goto InitWait; /* no InitWait seen yet, fudge it */
+
+		/* Set input abs params to match backend screen res */
+		if (xenbus_scanf(XBT_NIL, info->xbdev->otherend,
+				 "width", "%d", &val) > 0)
+			input_set_abs_params(info->ptr, ABS_X, 0, val, 0, 0);
+
+		if (xenbus_scanf(XBT_NIL, info->xbdev->otherend,
+				 "height", "%d", &val) > 0)
+			input_set_abs_params(info->ptr, ABS_Y, 0, val, 0, 0);
+
 		break;
 
 	case XenbusStateClosing:
@@ -337,4 +353,6 @@ static void __exit xenkbd_cleanup(void)
 module_init(xenkbd_init);
 module_exit(xenkbd_cleanup);
 
+MODULE_DESCRIPTION("Xen virtual keyboard/pointer device frontend");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("xen:vkbd");