Input: add driver for Penmount serial touchscreens

Signed-off-by: Rick Koch <n1gp@hotmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

3 files changed, 198 insertions, 0 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index b1b14f8d4dd..fa038126d50 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -108,4 +108,16 @@ config TOUCHSCREEN_HP600
 	  To compile this driver as a module, choose M here: the
 	  module will be called hp680_ts_input.
 
+config TOUCHSCREEN_PENMOUNT
+	tristate "Penmount serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Penmount serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called penmount.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 5e5557c4312..72e7be8097a 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_TOUCHSCREEN_ELO)	+= elo.o
 obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
 obj-$(CONFIG_TOUCHSCREEN_MK712)	+= mk712.o
 obj-$(CONFIG_TOUCHSCREEN_HP600)	+= hp680_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c
new file mode 100644
index 00000000000..f7370109d43
--- /dev/null
+++ b/drivers/input/touchscreen/penmount.c
@@ -0,0 +1,185 @@
+/*
+ * Penmount serial touchscreen driver
+ *
+ * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
+ *
+ * Based on ELO driver (drivers/input/touchscreen/elo.c)
+ * Copyright (c) 2004 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+
+#define DRIVER_DESC	"Penmount serial touchscreen driver"
+
+MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define	PM_MAX_LENGTH	5
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct pm {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[PM_MAX_LENGTH];
+	char phys[32];
+};
+
+static irqreturn_t pm_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags, struct pt_regs *regs)
+{
+	struct pm *pm = serio_get_drvdata(serio);
+	struct input_dev *dev = pm->dev;
+
+	pm->data[pm->idx] = data;
+
+	if (pm->data[0] & 0x80) {
+		if (PM_MAX_LENGTH == ++pm->idx) {
+			input_regs(dev, regs);
+			input_report_abs(dev, ABS_X, pm->data[2] * 128 + pm->data[1]);
+			input_report_abs(dev, ABS_Y, pm->data[4] * 128 + pm->data[3]);
+			input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40));
+			input_sync(dev);
+			pm->idx = 0;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * pm_disconnect() is the opposite of pm_connect()
+ */
+
+static void pm_disconnect(struct serio *serio)
+{
+	struct pm *pm = serio_get_drvdata(serio);
+
+	input_get_device(pm->dev);
+	input_unregister_device(pm->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(pm->dev);
+	kfree(pm);
+}
+
+/*
+ * pm_connect() is the routine that is called when someone adds a
+ * new serio device that supports Gunze protocol and registers it as
+ * an input device.
+ */
+
+static int pm_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct pm *pm;
+	struct input_dev *input_dev;
+	int err;
+
+	pm = kzalloc(sizeof(struct pm), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!pm || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	pm->serio = serio;
+	pm->dev = input_dev;
+	snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);
+
+	input_dev->private = pm;
+	input_dev->name = "Penmount Serial TouchScreen";
+	input_dev->phys = pm->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_PENMOUNT;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->cdev.dev = &serio->dev;
+
+        input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+        input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
+        input_set_abs_params(pm->dev, ABS_X, 0, 0x3ff, 0, 0);
+        input_set_abs_params(pm->dev, ABS_Y, 0, 0x3ff, 0, 0);
+
+	serio_set_drvdata(serio, pm);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(pm->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(pm);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id pm_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_PENMOUNT,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, pm_serio_ids);
+
+static struct serio_driver pm_drv = {
+	.driver		= {
+		.name	= "penmountlpc",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= pm_serio_ids,
+	.interrupt	= pm_interrupt,
+	.connect	= pm_connect,
+	.disconnect	= pm_disconnect,
+};
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init pm_init(void)
+{
+	serio_register_driver(&pm_drv);
+	return 0;
+}
+
+static void __exit pm_exit(void)
+{
+	serio_unregister_driver(&pm_drv);
+}
+
+module_init(pm_init);
+module_exit(pm_exit);