Input: move USB tablets under drivers/input/tablet

This will allow concentrating all input devices in one place
in {menu|x|q}config.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>

12 files changed, 5068 insertions, 0 deletions

diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index 96232313b1b..0e9b69535ad 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -153,6 +153,8 @@ source "drivers/input/mouse/Kconfig"
 
 source "drivers/input/joystick/Kconfig"
 
+source "drivers/input/tablet/Kconfig"
+
 source "drivers/input/touchscreen/Kconfig"
 
 source "drivers/input/misc/Kconfig"
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index b4cd10653c4..8a2dd987546 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_INPUT_EVBUG)	+= evbug.o
 obj-$(CONFIG_INPUT_KEYBOARD)	+= keyboard/
 obj-$(CONFIG_INPUT_MOUSE)	+= mouse/
 obj-$(CONFIG_INPUT_JOYSTICK)	+= joystick/
+obj-$(CONFIG_INPUT_TABLET)	+= tablet/
 obj-$(CONFIG_INPUT_TOUCHSCREEN)	+= touchscreen/
 obj-$(CONFIG_INPUT_MISC)	+= misc/
 
diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig
new file mode 100644
index 00000000000..12dfb0eb326
--- /dev/null
+++ b/drivers/input/tablet/Kconfig
@@ -0,0 +1,74 @@
+#
+# Tablet driver configuration
+#
+menuconfig INPUT_TABLET
+	bool "Tablets"
+	help
+	  Say Y here, and a list of supported tablets will be displayed.
+	  This option doesn't affect the kernel.
+
+	  If unsure, say Y.
+
+if INPUT_TABLET
+
+config TABLET_USB_ACECAD
+	tristate "Acecad Flair tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Acecad Flair
+	  tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called acecad.
+
+config TABLET_USB_AIPTEK
+	tristate "Aiptek 6000U/8000U tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Aiptek 6000U
+	  or Aiptek 8000U tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called aiptek.
+
+config TABLET_USB_GTCO
+        tristate "GTCO CalComp/InterWrite USB Support"
+        depends on USB && INPUT
+        help
+          Say Y here if you want to use the USB version of the GTCO
+          CalComp/InterWrite Tablet.  Make sure to say Y to "Mouse support"
+          (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+          (CONFIG_INPUT_EVDEV) as well.
+
+          To compile this driver as a module, choose M here: the
+          module will be called gtco.
+
+config TABLET_USB_KBTAB
+	tristate "KB Gear JamStudio tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the KB Gear
+	  JamStudio tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kbtab.
+
+config TABLET_USB_WACOM
+	tristate "Wacom Intuos/Graphire tablet support (USB)"
+	select USB
+	help
+	  Say Y here if you want to use the USB version of the Wacom Intuos
+	  or Graphire tablet.  Make sure to say Y to "Mouse support"
+	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+	  (CONFIG_INPUT_EVDEV) as well.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wacom.
+
+endif
diff --git a/drivers/input/tablet/Makefile b/drivers/input/tablet/Makefile
new file mode 100644
index 00000000000..ce8b9a9cfa4
--- /dev/null
+++ b/drivers/input/tablet/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for the tablet drivers
+#
+
+# Multipart objects.
+wacom-objs	:= wacom_wac.o wacom_sys.o
+
+obj-$(CONFIG_TABLET_USB_ACECAD)	+= acecad.o
+obj-$(CONFIG_TABLET_USB_AIPTEK)	+= aiptek.o
+obj-$(CONFIG_TABLET_USB_GTCO)	+= gtco.o
+obj-$(CONFIG_TABLET_USB_KBTAB)	+= kbtab.o
+obj-$(CONFIG_TABLET_USB_WACOM)	+= wacom.o
diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
new file mode 100644
index 00000000000..dd2310458c4
--- /dev/null
+++ b/drivers/input/tablet/acecad.c
@@ -0,0 +1,289 @@
+/*
+ *  Copyright (c) 2001-2005 Edouard TISSERANT   <edouard.tisserant@wanadoo.fr>
+ *  Copyright (c) 2004-2005 Stephane VOLTZ      <svoltz@numericable.fr>
+ *
+ *  USB Acecad "Acecad Flair" tablet support
+ *
+ *  Changelog:
+ *      v3.2 - Added sysfs support
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb/input.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v3.2"
+#define DRIVER_DESC    "USB Acecad Flair tablet driver"
+#define DRIVER_LICENSE "GPL"
+#define DRIVER_AUTHOR  "Edouard TISSERANT <edouard.tisserant@wanadoo.fr>"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_ACECAD	0x0460
+#define USB_DEVICE_ID_FLAIR	0x0004
+#define USB_DEVICE_ID_302	0x0008
+
+struct usb_acecad {
+	char name[128];
+	char phys[64];
+	struct usb_device *usbdev;
+	struct input_dev *input;
+	struct urb *irq;
+
+	unsigned char *data;
+	dma_addr_t data_dma;
+};
+
+static void usb_acecad_irq(struct urb *urb)
+{
+	struct usb_acecad *acecad = urb->context;
+	unsigned char *data = acecad->data;
+	struct input_dev *dev = acecad->input;
+	int prox, status;
+
+	switch (urb->status) {
+		case 0:
+			/* success */
+			break;
+		case -ECONNRESET:
+		case -ENOENT:
+		case -ESHUTDOWN:
+			/* this urb is terminated, clean up */
+			dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+			return;
+		default:
+			dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+			goto resubmit;
+	}
+
+	prox = (data[0] & 0x04) >> 2;
+	input_report_key(dev, BTN_TOOL_PEN, prox);
+
+	if (prox) {
+		int x = data[1] | (data[2] << 8);
+		int y = data[3] | (data[4] << 8);
+		/* Pressure should compute the same way for flair and 302 */
+		int pressure = data[5] | (data[6] << 8);
+		int touch = data[0] & 0x01;
+		int stylus = (data[0] & 0x10) >> 4;
+		int stylus2 = (data[0] & 0x20) >> 5;
+		input_report_abs(dev, ABS_X, x);
+		input_report_abs(dev, ABS_Y, y);
+		input_report_abs(dev, ABS_PRESSURE, pressure);
+		input_report_key(dev, BTN_TOUCH, touch);
+		input_report_key(dev, BTN_STYLUS, stylus);
+		input_report_key(dev, BTN_STYLUS2, stylus2);
+	}
+
+	/* event termination */
+	input_sync(dev);
+
+resubmit:
+	status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (status)
+		err("can't resubmit intr, %s-%s/input0, status %d",
+			acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status);
+}
+
+static int usb_acecad_open(struct input_dev *dev)
+{
+	struct usb_acecad *acecad = input_get_drvdata(dev);
+
+	acecad->irq->dev = acecad->usbdev;
+	if (usb_submit_urb(acecad->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void usb_acecad_close(struct input_dev *dev)
+{
+	struct usb_acecad *acecad = input_get_drvdata(dev);
+
+	usb_kill_urb(acecad->irq);
+}
+
+static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_host_interface *interface = intf->cur_altsetting;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_acecad *acecad;
+	struct input_dev *input_dev;
+	int pipe, maxp;
+	int err = -ENOMEM;
+
+	if (interface->desc.bNumEndpoints != 1)
+		return -ENODEV;
+
+	endpoint = &interface->endpoint[0].desc;
+
+	if (!usb_endpoint_is_int_in(endpoint))
+		return -ENODEV;
+
+	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
+	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
+
+	acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!acecad || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	acecad->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &acecad->data_dma);
+	if (!acecad->data) {
+		err= -ENOMEM;
+		goto fail1;
+	}
+
+	acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!acecad->irq) {
+		err = -ENOMEM;
+		goto fail2;
+	}
+
+	acecad->usbdev = dev;
+	acecad->input = input_dev;
+
+	if (dev->manufacturer)
+		strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
+
+	if (dev->product) {
+		if (dev->manufacturer)
+			strlcat(acecad->name, " ", sizeof(acecad->name));
+		strlcat(acecad->name, dev->product, sizeof(acecad->name));
+	}
+
+	usb_make_path(dev, acecad->phys, sizeof(acecad->phys));
+	strlcat(acecad->phys, "/input0", sizeof(acecad->phys));
+
+	input_dev->name = acecad->name;
+	input_dev->phys = acecad->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, acecad);
+
+	input_dev->open = usb_acecad_open;
+	input_dev->close = usb_acecad_close;
+
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
+	input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
+	input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+	input_dev->keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2);
+
+	switch (id->driver_info) {
+		case 0:
+			input_dev->absmax[ABS_X] = 5000;
+			input_dev->absmax[ABS_Y] = 3750;
+			input_dev->absmax[ABS_PRESSURE] = 512;
+			if (!strlen(acecad->name))
+				snprintf(acecad->name, sizeof(acecad->name),
+					"USB Acecad Flair Tablet %04x:%04x",
+					le16_to_cpu(dev->descriptor.idVendor),
+					le16_to_cpu(dev->descriptor.idProduct));
+			break;
+		case 1:
+			input_dev->absmax[ABS_X] = 3000;
+			input_dev->absmax[ABS_Y] = 2250;
+			input_dev->absmax[ABS_PRESSURE] = 1024;
+			if (!strlen(acecad->name))
+				snprintf(acecad->name, sizeof(acecad->name),
+					"USB Acecad 302 Tablet %04x:%04x",
+					le16_to_cpu(dev->descriptor.idVendor),
+					le16_to_cpu(dev->descriptor.idProduct));
+			break;
+	}
+
+	input_dev->absfuzz[ABS_X] = 4;
+	input_dev->absfuzz[ABS_Y] = 4;
+
+	usb_fill_int_urb(acecad->irq, dev, pipe,
+			acecad->data, maxp > 8 ? 8 : maxp,
+			usb_acecad_irq, acecad, endpoint->bInterval);
+	acecad->irq->transfer_dma = acecad->data_dma;
+	acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	err = input_register_device(acecad->input);
+	if (err)
+		goto fail2;
+
+	usb_set_intfdata(intf, acecad);
+
+	return 0;
+
+ fail2:	usb_buffer_free(dev, 8, acecad->data, acecad->data_dma);
+ fail1: input_free_device(input_dev);
+	kfree(acecad);
+	return err;
+}
+
+static void usb_acecad_disconnect(struct usb_interface *intf)
+{
+	struct usb_acecad *acecad = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (acecad) {
+		usb_kill_urb(acecad->irq);
+		input_unregister_device(acecad->input);
+		usb_free_urb(acecad->irq);
+		usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma);
+		kfree(acecad);
+	}
+}
+
+static struct usb_device_id usb_acecad_id_table [] = {
+	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 },
+	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302),	 .driver_info = 1 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, usb_acecad_id_table);
+
+static struct usb_driver usb_acecad_driver = {
+	.name =		"usb_acecad",
+	.probe =	usb_acecad_probe,
+	.disconnect =	usb_acecad_disconnect,
+	.id_table =	usb_acecad_id_table,
+};
+
+static int __init usb_acecad_init(void)
+{
+	int result = usb_register(&usb_acecad_driver);
+	if (result == 0)
+		info(DRIVER_VERSION ":" DRIVER_DESC);
+	return result;
+}
+
+static void __exit usb_acecad_exit(void)
+{
+	usb_deregister(&usb_acecad_driver);
+}
+
+module_init(usb_acecad_init);
+module_exit(usb_acecad_exit);
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
new file mode 100644
index 00000000000..cc0a498763d
--- /dev/null
+++ b/drivers/input/tablet/aiptek.c
@@ -0,0 +1,2236 @@
+/*
+ *  Native support for the Aiptek HyperPen USB Tablets
+ *  (4000U/5000U/6000U/8000U/12000U)
+ *
+ *  Copyright (c) 2001      Chris Atenasio   <chris@crud.net>
+ *  Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net>
+ *
+ *  based on wacom.c by
+ *     Vojtech Pavlik      <vojtech@suse.cz>
+ *     Andreas Bach Aaen   <abach@stofanet.dk>
+ *     Clifford Wolf       <clifford@clifford.at>
+ *     Sam Mosel           <sam.mosel@computer.org>
+ *     James E. Blair      <corvus@gnu.org>
+ *     Daniel Egger        <egger@suse.de>
+ *
+ *  Many thanks to Oliver Kuechemann for his support.
+ *
+ *  ChangeLog:
+ *      v0.1 - Initial release
+ *      v0.2 - Hack to get around fake event 28's. (Bryan W. Headley)
+ *      v0.3 - Make URB dynamic (Bryan W. Headley, Jun-8-2002)
+ *             Released to Linux 2.4.19 and 2.5.x
+ *      v0.4 - Rewrote substantial portions of the code to deal with
+ *             corrected control sequences, timing, dynamic configuration,
+ *             support of 6000U - 12000U, procfs, and macro key support
+ *             (Jan-1-2003 - Feb-5-2003, Bryan W. Headley)
+ *      v1.0 - Added support for diagnostic messages, count of messages
+ *             received from URB - Mar-8-2003, Bryan W. Headley
+ *      v1.1 - added support for tablet resolution, changed DV and proximity
+ *             some corrections - Jun-22-2003, martin schneebacher
+ *           - Added support for the sysfs interface, deprecating the
+ *             procfs interface for 2.5.x kernel. Also added support for
+ *             Wheel command. Bryan W. Headley July-15-2003.
+ *      v1.2 - Reworked jitter timer as a kernel thread.
+ *             Bryan W. Headley November-28-2003/Jan-10-2004.
+ *      v1.3 - Repaired issue of kernel thread going nuts on single-processor
+ *             machines, introduced programmableDelay as a command line
+ *             parameter. Feb 7 2004, Bryan W. Headley.
+ *      v1.4 - Re-wire jitter so it does not require a thread. Courtesy of
+ *             Rene van Paassen. Added reporting of physical pointer device
+ *             (e.g., stylus, mouse in reports 2, 3, 4, 5. We don't know
+ *             for reports 1, 6.)
+ *             what physical device reports for reports 1, 6.) Also enabled
+ *             MOUSE and LENS tool button modes. Renamed "rubber" to "eraser".
+ *             Feb 20, 2004, Bryan W. Headley.
+ *      v1.5 - Added previousJitterable, so we don't do jitter delay when the
+ *             user is holding a button down for periods of time.
+ *
+ * NOTE:
+ *      This kernel driver is augmented by the "Aiptek" XFree86 input
+ *      driver for your X server, as well as the Gaiptek GUI Front-end
+ *      "Tablet Manager".
+ *      These three products are highly interactive with one another,
+ *      so therefore it's easier to document them all as one subsystem.
+ *      Please visit the project's "home page", located at,
+ *      http://aiptektablet.sourceforge.net.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb/input.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.5 (May-15-2004)"
+#define DRIVER_AUTHOR  "Bryan W. Headley/Chris Atenasio"
+#define DRIVER_DESC    "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)"
+
+/*
+ * Aiptek status packet:
+ *
+ * (returned as Report 1 - relative coordinates from mouse and stylus)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     0     0     1
+ * byte1   0     0     0     0     0    BS2   BS    Tip
+ * byte2  X7    X6    X5    X4    X3    X2    X1    X0
+ * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
+ *
+ * (returned as Report 2 - absolute coordinates from the stylus)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     0     1     0
+ * byte1  X7    X6    X5    X4    X3    X2    X1    X0
+ * byte2  X15   X14   X13   X12   X11   X10   X9    X8
+ * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
+ * byte4  Y15   Y14   Y13   Y12   Y11   Y10   Y9    Y8
+ * byte5   *     *     *    BS2   BS1   Tip   IR    DV
+ * byte6  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte7  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * (returned as Report 3 - absolute coordinates from the mouse)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     0     1     0
+ * byte1  X7    X6    X5    X4    X3    X2    X1    X0
+ * byte2  X15   X14   X13   X12   X11   X10   X9    X8
+ * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
+ * byte4  Y15   Y14   Y13   Y12   Y11   Y10   Y9    Y8
+ * byte5   *     *     *    BS2   BS1   Tip   IR    DV
+ * byte6  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte7  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * (returned as Report 4 - macrokeys from the stylus)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     1     0     0
+ * byte1   0     0     0    BS2   BS    Tip   IR    DV
+ * byte2   0     0     0     0     0     0     1     0
+ * byte3   0     0     0    K4    K3    K2    K1    K0
+ * byte4  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte5  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * (returned as Report 5 - macrokeys from the mouse)
+ *
+ *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
+ * byte0   0     0     0     0     0     1     0     0
+ * byte1   0     0     0    BS2   BS    Tip   IR    DV
+ * byte2   0     0     0     0     0     0     1     0
+ * byte3   0     0     0    K4    K3    K2    K1    K0
+ * byte4  P7    P6    P5    P4    P3    P2    P1    P0
+ * byte5  P15   P14   P13   P12   P11   P10   P9    P8
+ *
+ * IR: In Range = Proximity on
+ * DV = Data Valid
+ * BS = Barrel Switch (as in, macro keys)
+ * BS2 also referred to as Tablet Pick
+ *
+ * Command Summary:
+ *
+ * Use report_type CONTROL (3)
+ * Use report_id   2
+ *
+ * Command/Data    Description     Return Bytes    Return Value
+ * 0x10/0x00       SwitchToMouse       0
+ * 0x10/0x01       SwitchToTablet      0
+ * 0x18/0x04       SetResolution       0
+ * 0x12/0xFF       AutoGainOn          0
+ * 0x17/0x00       FilterOn            0
+ * 0x01/0x00       GetXExtension       2           MaxX
+ * 0x01/0x01       GetYExtension       2           MaxY
+ * 0x02/0x00       GetModelCode        2           ModelCode = LOBYTE
+ * 0x03/0x00       GetODMCode          2           ODMCode
+ * 0x08/0x00       GetPressureLevels   2           =512
+ * 0x04/0x00       GetFirmwareVersion  2           Firmware Version
+ * 0x11/0x02       EnableMacroKeys     0
+ *
+ * To initialize the tablet:
+ *
+ * (1) Send Resolution500LPI (Command)
+ * (2) Query for Model code (Option Report)
+ * (3) Query for ODM code (Option Report)
+ * (4) Query for firmware (Option Report)
+ * (5) Query for GetXExtension (Option Report)
+ * (6) Query for GetYExtension (Option Report)
+ * (7) Query for GetPressureLevels (Option Report)
+ * (8) SwitchToTablet for Absolute coordinates, or
+ *     SwitchToMouse for Relative coordinates (Command)
+ * (9) EnableMacroKeys (Command)
+ * (10) FilterOn (Command)
+ * (11) AutoGainOn (Command)
+ *
+ * (Step 9 can be omitted, but you'll then have no function keys.)
+ */
+
+#define USB_VENDOR_ID_AIPTEK				0x08ca
+#define USB_REQ_GET_REPORT				0x01
+#define USB_REQ_SET_REPORT				0x09
+
+	/* PointerMode codes
+	 */
+#define AIPTEK_POINTER_ONLY_MOUSE_MODE			0
+#define AIPTEK_POINTER_ONLY_STYLUS_MODE			1
+#define AIPTEK_POINTER_EITHER_MODE			2
+
+#define AIPTEK_POINTER_ALLOW_MOUSE_MODE(a)		\
+	(a == AIPTEK_POINTER_ONLY_MOUSE_MODE ||		\
+	 a == AIPTEK_POINTER_EITHER_MODE)
+#define AIPTEK_POINTER_ALLOW_STYLUS_MODE(a)		\
+	(a == AIPTEK_POINTER_ONLY_STYLUS_MODE ||	\
+	 a == AIPTEK_POINTER_EITHER_MODE)
+
+	/* CoordinateMode code
+	 */
+#define AIPTEK_COORDINATE_RELATIVE_MODE			0
+#define AIPTEK_COORDINATE_ABSOLUTE_MODE			1
+
+       /* XTilt and YTilt values
+        */
+#define AIPTEK_TILT_MIN					(-128)
+#define AIPTEK_TILT_MAX					127
+#define AIPTEK_TILT_DISABLE				(-10101)
+
+	/* Wheel values
+	 */
+#define AIPTEK_WHEEL_MIN				0
+#define AIPTEK_WHEEL_MAX				1024
+#define AIPTEK_WHEEL_DISABLE				(-10101)
+
+	/* ToolCode values, which BTW are 0x140 .. 0x14f
+	 * We have things set up such that if TOOL_BUTTON_FIRED_BIT is
+	 * not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx.
+	 *
+	 * Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will
+	 * get reset.
+	 */
+#define TOOL_BUTTON(x)					((x) & 0x14f)
+#define TOOL_BUTTON_FIRED(x)				((x) & 0x200)
+#define TOOL_BUTTON_FIRED_BIT				0x200
+	/* toolMode codes
+	 */
+#define AIPTEK_TOOL_BUTTON_PEN_MODE			BTN_TOOL_PEN
+#define AIPTEK_TOOL_BUTTON_PEN_MODE			BTN_TOOL_PEN
+#define AIPTEK_TOOL_BUTTON_PENCIL_MODE			BTN_TOOL_PENCIL
+#define AIPTEK_TOOL_BUTTON_BRUSH_MODE			BTN_TOOL_BRUSH
+#define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE		BTN_TOOL_AIRBRUSH
+#define AIPTEK_TOOL_BUTTON_ERASER_MODE			BTN_TOOL_RUBBER
+#define AIPTEK_TOOL_BUTTON_MOUSE_MODE			BTN_TOOL_MOUSE
+#define AIPTEK_TOOL_BUTTON_LENS_MODE			BTN_TOOL_LENS
+
+	/* Diagnostic message codes
+	 */
+#define AIPTEK_DIAGNOSTIC_NA				0
+#define AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE	1
+#define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE	2
+#define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED		3
+
+	/* Time to wait (in ms) to help mask hand jittering
+	 * when pressing the stylus buttons.
+	 */
+#define AIPTEK_JITTER_DELAY_DEFAULT			50
+
+	/* Time to wait (in ms) in-between sending the tablet
+	 * a command and beginning the process of reading the return
+	 * sequence from the tablet.
+	 */
+#define AIPTEK_PROGRAMMABLE_DELAY_25		25
+#define AIPTEK_PROGRAMMABLE_DELAY_50		50
+#define AIPTEK_PROGRAMMABLE_DELAY_100		100
+#define AIPTEK_PROGRAMMABLE_DELAY_200		200
+#define AIPTEK_PROGRAMMABLE_DELAY_300		300
+#define AIPTEK_PROGRAMMABLE_DELAY_400		400
+#define AIPTEK_PROGRAMMABLE_DELAY_DEFAULT	AIPTEK_PROGRAMMABLE_DELAY_400
+
+	/* Mouse button programming
+	 */
+#define AIPTEK_MOUSE_LEFT_BUTTON		0x01
+#define AIPTEK_MOUSE_RIGHT_BUTTON		0x02
+#define AIPTEK_MOUSE_MIDDLE_BUTTON		0x04
+
+	/* Stylus button programming
+	 */
+#define AIPTEK_STYLUS_LOWER_BUTTON		0x08
+#define AIPTEK_STYLUS_UPPER_BUTTON		0x10
+
+	/* Length of incoming packet from the tablet
+	 */
+#define AIPTEK_PACKET_LENGTH			8
+
+	/* We report in EV_MISC both the proximity and
+	 * whether the report came from the stylus, tablet mouse
+	 * or "unknown" -- Unknown when the tablet is in relative
+	 * mode, because we only get report 1's.
+	 */
+#define AIPTEK_REPORT_TOOL_UNKNOWN		0x10
+#define AIPTEK_REPORT_TOOL_STYLUS		0x20
+#define AIPTEK_REPORT_TOOL_MOUSE		0x40
+
+static int programmableDelay = AIPTEK_PROGRAMMABLE_DELAY_DEFAULT;
+static int jitterDelay = AIPTEK_JITTER_DELAY_DEFAULT;
+
+struct aiptek_features {
+	int odmCode;		/* Tablet manufacturer code       */
+	int modelCode;		/* Tablet model code (not unique) */
+	int firmwareCode;	/* prom/eeprom version            */
+	char usbPath[64 + 1];	/* device's physical usb path     */
+	char inputPath[64 + 1];	/* input device path              */
+};
+
+struct aiptek_settings {
+	int pointerMode;	/* stylus-, mouse-only or either */
+	int coordinateMode;	/* absolute/relative coords      */
+	int toolMode;		/* pen, pencil, brush, etc. tool */
+	int xTilt;		/* synthetic xTilt amount        */
+	int yTilt;		/* synthetic yTilt amount        */
+	int wheel;		/* synthetic wheel amount        */
+	int stylusButtonUpper;	/* stylus upper btn delivers...  */
+	int stylusButtonLower;	/* stylus lower btn delivers...  */
+	int mouseButtonLeft;	/* mouse left btn delivers...    */
+	int mouseButtonMiddle;	/* mouse middle btn delivers...  */
+	int mouseButtonRight;	/* mouse right btn delivers...   */
+	int programmableDelay;	/* delay for tablet programming  */
+	int jitterDelay;	/* delay for hand jittering      */
+};
+
+struct aiptek {
+	struct input_dev *inputdev;		/* input device struct           */
+	struct usb_device *usbdev;		/* usb device struct             */
+	struct urb *urb;			/* urb for incoming reports      */
+	dma_addr_t data_dma;			/* our dma stuffage              */
+	struct aiptek_features features;	/* tablet's array of features    */
+	struct aiptek_settings curSetting;	/* tablet's current programmable */
+	struct aiptek_settings newSetting;	/* ... and new param settings    */
+	unsigned int ifnum;			/* interface number for IO       */
+	int diagnostic;				/* tablet diagnostic codes       */
+	unsigned long eventCount;		/* event count                   */
+	int inDelay;				/* jitter: in jitter delay?      */
+	unsigned long endDelay;			/* jitter: time when delay ends  */
+	int previousJitterable;			/* jitterable prev value     */
+	unsigned char *data;			/* incoming packet data          */
+};
+
+/*
+ * Permit easy lookup of keyboard events to send, versus
+ * the bitmap which comes from the tablet. This hides the
+ * issue that the F_keys are not sequentially numbered.
+ */
+static const int macroKeyEvents[] = {
+	KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5,
+	KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11,
+	KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17,
+	KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23,
+	KEY_F24, KEY_STOP, KEY_AGAIN, KEY_PROPS, KEY_UNDO,
+	KEY_FRONT, KEY_COPY, KEY_OPEN, KEY_PASTE, 0
+};
+
+/***********************************************************************
+ * Relative reports deliver values in 2's complement format to
+ * deal with negative offsets.
+ */
+static int aiptek_convert_from_2s_complement(unsigned char c)
+{
+	int ret;
+	unsigned char b = c;
+	int negate = 0;
+
+	if ((b & 0x80) != 0) {
+		b = ~b;
+		b--;
+		negate = 1;
+	}
+	ret = b;
+	ret = (negate == 1) ? -ret : ret;
+	return ret;
+}
+
+/***********************************************************************
+ * aiptek_irq can receive one of six potential reports.
+ * The documentation for each is in the body of the function.
+ *
+ * The tablet reports on several attributes per invocation of
+ * aiptek_irq. Because the Linux Input Event system allows the
+ * transmission of ONE attribute per input_report_xxx() call,
+ * collation has to be done on the other end to reconstitute
+ * a complete tablet report. Further, the number of Input Event reports
+ * submitted varies, depending on what USB report type, and circumstance.
+ * To deal with this, EV_MSC is used to indicate an 'end-of-report'
+ * message. This has been an undocumented convention understood by the kernel
+ * tablet driver and clients such as gpm and XFree86's tablet drivers.
+ *
+ * Of the information received from the tablet, the one piece I
+ * cannot transmit is the proximity bit (without resorting to an EV_MSC
+ * convention above.) I therefore have taken over REL_MISC and ABS_MISC
+ * (for relative and absolute reports, respectively) for communicating
+ * Proximity. Why two events? I thought it interesting to know if the
+ * Proximity event occurred while the tablet was in absolute or relative
+ * mode.
+ *
+ * Other tablets use the notion of a certain minimum stylus pressure
+ * to infer proximity. While that could have been done, that is yet
+ * another 'by convention' behavior, the documentation for which
+ * would be spread between two (or more) pieces of software.
+ *
+ * EV_MSC usage was terminated for this purpose in Linux 2.5.x, and
+ * replaced with the input_sync() method (which emits EV_SYN.)
+ */
+
+static void aiptek_irq(struct urb *urb)
+{
+	struct aiptek *aiptek = urb->context;
+	unsigned char *data = aiptek->data;
+	struct input_dev *inputdev = aiptek->inputdev;
+	int jitterable = 0;
+	int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck;
+
+	switch (urb->status) {
+	case 0:
+		/* Success */
+		break;
+
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* This urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d",
+		    __FUNCTION__, urb->status);
+		return;
+
+	default:
+		dbg("%s - nonzero urb status received: %d",
+		    __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	/* See if we are in a delay loop -- throw out report if true.
+	 */
+	if (aiptek->inDelay == 1 && time_after(aiptek->endDelay, jiffies)) {
+		goto exit;
+	}
+
+	aiptek->inDelay = 0;
+	aiptek->eventCount++;
+
+	/* Report 1 delivers relative coordinates with either a stylus
+	 * or the mouse. You do not know, however, which input
+	 * tool generated the event.
+	 */
+	if (data[0] == 1) {
+		if (aiptek->curSetting.coordinateMode ==
+		    AIPTEK_COORDINATE_ABSOLUTE_MODE) {
+			aiptek->diagnostic =
+			    AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE;
+		} else {
+			x = aiptek_convert_from_2s_complement(data[2]);
+			y = aiptek_convert_from_2s_complement(data[3]);
+
+			/* jitterable keeps track of whether any button has been pressed.
+			 * We're also using it to remap the physical mouse button mask
+			 * to pseudo-settings. (We don't specifically care about it's
+			 * value after moving/transposing mouse button bitmasks, except
+			 * that a non-zero value indicates that one or more
+			 * mouse button was pressed.)
+			 */
+			jitterable = data[5] & 0x07;
+
+			left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
+			right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
+			middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+
+			input_report_key(inputdev, BTN_LEFT, left);
+			input_report_key(inputdev, BTN_MIDDLE, middle);
+			input_report_key(inputdev, BTN_RIGHT, right);
+			input_report_rel(inputdev, REL_X, x);
+			input_report_rel(inputdev, REL_Y, y);
+			input_report_rel(inputdev, REL_MISC, 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
+
+			/* Wheel support is in the form of a single-event
+			 * firing.
+			 */
+			if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
+				input_report_rel(inputdev, REL_WHEEL,
+						 aiptek->curSetting.wheel);
+				aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+			}
+			input_sync(inputdev);
+		}
+	}
+	/* Report 2 is delivered only by the stylus, and delivers
+	 * absolute coordinates.
+	 */
+	else if (data[0] == 2) {
+		if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
+			aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
+		} else if (!AIPTEK_POINTER_ALLOW_STYLUS_MODE
+			    (aiptek->curSetting.pointerMode)) {
+				aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
+		} else {
+			x = le16_to_cpu(get_unaligned((__le16 *) (data + 1)));
+			y = le16_to_cpu(get_unaligned((__le16 *) (data + 3)));
+			z = le16_to_cpu(get_unaligned((__le16 *) (data + 6)));
+
+			p = (data[5] & 0x01) != 0 ? 1 : 0;
+			dv = (data[5] & 0x02) != 0 ? 1 : 0;
+			tip = (data[5] & 0x04) != 0 ? 1 : 0;
+
+			/* Use jitterable to re-arrange button masks
+			 */
+			jitterable = data[5] & 0x18;
+
+			bs = (data[5] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
+			pck = (data[5] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
+
+			/* dv indicates 'data valid' (e.g., the tablet is in sync
+			 * and has delivered a "correct" report) We will ignore
+			 * all 'bad' reports...
+			 */
+			if (dv != 0) {
+				/* If we've not already sent a tool_button_?? code, do
+				 * so now. Then set FIRED_BIT so it won't be resent unless
+				 * the user forces FIRED_BIT off.
+				 */
+				if (TOOL_BUTTON_FIRED
+				    (aiptek->curSetting.toolMode) == 0) {
+					input_report_key(inputdev,
+							 TOOL_BUTTON(aiptek->curSetting.toolMode),
+							 1);
+					aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+				}
+
+				if (p != 0) {
+					input_report_abs(inputdev, ABS_X, x);
+					input_report_abs(inputdev, ABS_Y, y);
+					input_report_abs(inputdev, ABS_PRESSURE, z);
+
+					input_report_key(inputdev, BTN_TOUCH, tip);
+					input_report_key(inputdev, BTN_STYLUS, bs);
+					input_report_key(inputdev, BTN_STYLUS2, pck);
+
+					if (aiptek->curSetting.xTilt !=
+					    AIPTEK_TILT_DISABLE) {
+						input_report_abs(inputdev,
+								 ABS_TILT_X,
+								 aiptek->curSetting.xTilt);
+					}
+					if (aiptek->curSetting.yTilt != AIPTEK_TILT_DISABLE) {
+						input_report_abs(inputdev,
+								 ABS_TILT_Y,
+								 aiptek->curSetting.yTilt);
+					}
+
+					/* Wheel support is in the form of a single-event
+					 * firing.
+					 */
+					if (aiptek->curSetting.wheel !=
+					    AIPTEK_WHEEL_DISABLE) {
+						input_report_abs(inputdev,
+								 ABS_WHEEL,
+								 aiptek->curSetting.wheel);
+						aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+					}
+				}
+				input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS);
+				input_sync(inputdev);
+			}
+		}
+	}
+	/* Report 3's come from the mouse in absolute mode.
+	 */
+	else if (data[0] == 3) {
+		if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
+			aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
+		} else if (!AIPTEK_POINTER_ALLOW_MOUSE_MODE
+			(aiptek->curSetting.pointerMode)) {
+			aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
+		} else {
+			x = le16_to_cpu(get_unaligned((__le16 *) (data + 1)));
+			y = le16_to_cpu(get_unaligned((__le16 *) (data + 3)));
+
+			jitterable = data[5] & 0x1c;
+
+			p = (data[5] & 0x01) != 0 ? 1 : 0;
+			dv = (data[5] & 0x02) != 0 ? 1 : 0;
+			left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
+			right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
+			middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+
+			if (dv != 0) {
+				/* If we've not already sent a tool_button_?? code, do
+				 * so now. Then set FIRED_BIT so it won't be resent unless
+				 * the user forces FIRED_BIT off.
+				 */
+				if (TOOL_BUTTON_FIRED
+				    (aiptek->curSetting.toolMode) == 0) {
+					input_report_key(inputdev,
+							 TOOL_BUTTON(aiptek->curSetting.toolMode),
+							 1);
+					aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+				}
+
+				if (p != 0) {
+					input_report_abs(inputdev, ABS_X, x);
+					input_report_abs(inputdev, ABS_Y, y);
+
+					input_report_key(inputdev, BTN_LEFT, left);
+					input_report_key(inputdev, BTN_MIDDLE, middle);
+					input_report_key(inputdev, BTN_RIGHT, right);
+
+					/* Wheel support is in the form of a single-event
+					 * firing.
+					 */
+					if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
+						input_report_abs(inputdev,
+								 ABS_WHEEL,
+								 aiptek->curSetting.wheel);
+						aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
+					}
+				}
+				input_report_rel(inputdev, REL_MISC, p | AIPTEK_REPORT_TOOL_MOUSE);
+				input_sync(inputdev);
+			}
+		}
+	}
+	/* Report 4s come from the macro keys when pressed by stylus
+	 */
+	else if (data[0] == 4) {
+		jitterable = data[1] & 0x18;
+
+		p = (data[1] & 0x01) != 0 ? 1 : 0;
+		dv = (data[1] & 0x02) != 0 ? 1 : 0;
+		tip = (data[1] & 0x04) != 0 ? 1 : 0;
+		bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
+		pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
+
+		macro = data[3];
+		z = le16_to_cpu(get_unaligned((__le16 *) (data + 4)));
+
+		if (dv != 0) {
+			/* If we've not already sent a tool_button_?? code, do
+			 * so now. Then set FIRED_BIT so it won't be resent unless
+			 * the user forces FIRED_BIT off.
+			 */
+			if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
+				input_report_key(inputdev,
+						 TOOL_BUTTON(aiptek->curSetting.toolMode),
+						 1);
+				aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+			}
+
+			if (p != 0) {
+				input_report_key(inputdev, BTN_TOUCH, tip);
+				input_report_key(inputdev, BTN_STYLUS, bs);
+				input_report_key(inputdev, BTN_STYLUS2, pck);
+				input_report_abs(inputdev, ABS_PRESSURE, z);
+			}
+
+			/* For safety, we're sending key 'break' codes for the
+			 * neighboring macro keys.
+			 */
+			if (macro > 0) {
+				input_report_key(inputdev,
+						 macroKeyEvents[macro - 1], 0);
+			}
+			if (macro < 25) {
+				input_report_key(inputdev,
+						 macroKeyEvents[macro + 1], 0);
+			}
+			input_report_key(inputdev, macroKeyEvents[macro], p);
+			input_report_abs(inputdev, ABS_MISC,
+					 p | AIPTEK_REPORT_TOOL_STYLUS);
+			input_sync(inputdev);
+		}
+	}
+	/* Report 5s come from the macro keys when pressed by mouse
+	 */
+	else if (data[0] == 5) {
+		jitterable = data[1] & 0x1c;
+
+		p = (data[1] & 0x01) != 0 ? 1 : 0;
+		dv = (data[1] & 0x02) != 0 ? 1 : 0;
+		left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
+		right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
+		middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
+		macro = data[3];
+
+		if (dv != 0) {
+			/* If we've not already sent a tool_button_?? code, do
+			 * so now. Then set FIRED_BIT so it won't be resent unless
+			 * the user forces FIRED_BIT off.
+			 */
+			if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
+				input_report_key(inputdev,
+						 TOOL_BUTTON(aiptek->curSetting.toolMode),
+						 1);
+				aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+			}
+
+			if (p != 0) {
+				input_report_key(inputdev, BTN_LEFT, left);
+				input_report_key(inputdev, BTN_MIDDLE, middle);
+				input_report_key(inputdev, BTN_RIGHT, right);
+			}
+
+			/* For safety, we're sending key 'break' codes for the
+			 * neighboring macro keys.
+			 */
+			if (macro > 0) {
+				input_report_key(inputdev,
+						 macroKeyEvents[macro - 1], 0);
+			}
+			if (macro < 25) {
+				input_report_key(inputdev,
+						 macroKeyEvents[macro + 1], 0);
+			}
+
+			input_report_key(inputdev, macroKeyEvents[macro], 1);
+			input_report_rel(inputdev, ABS_MISC,
+					 p | AIPTEK_REPORT_TOOL_MOUSE);
+			input_sync(inputdev);
+		}
+	}
+	/* We have no idea which tool can generate a report 6. Theoretically,
+	 * neither need to, having been given reports 4 & 5 for such use.
+	 * However, report 6 is the 'official-looking' report for macroKeys;
+	 * reports 4 & 5 supposively are used to support unnamed, unknown
+	 * hat switches (which just so happen to be the macroKeys.)
+	 */
+	else if (data[0] == 6) {
+		macro = le16_to_cpu(get_unaligned((__le16 *) (data + 1)));
+		if (macro > 0) {
+			input_report_key(inputdev, macroKeyEvents[macro - 1],
+					 0);
+		}
+		if (macro < 25) {
+			input_report_key(inputdev, macroKeyEvents[macro + 1],
+					 0);
+		}
+
+		/* If we've not already sent a tool_button_?? code, do
+		 * so now. Then set FIRED_BIT so it won't be resent unless
+		 * the user forces FIRED_BIT off.
+		 */
+		if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
+			input_report_key(inputdev,
+					 TOOL_BUTTON(aiptek->curSetting.
+						     toolMode), 1);
+			aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
+		}
+
+		input_report_key(inputdev, macroKeyEvents[macro], 1);
+		input_report_abs(inputdev, ABS_MISC,
+				 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
+		input_sync(inputdev);
+	} else {
+		dbg("Unknown report %d", data[0]);
+	}
+
+	/* Jitter may occur when the user presses a button on the stlyus
+	 * or the mouse. What we do to prevent that is wait 'x' milliseconds
+	 * following a 'jitterable' event, which should give the hand some time
+	 * stabilize itself.
+	 *
+	 * We just introduced aiptek->previousJitterable to carry forth the
+	 * notion that jitter occurs when the button state changes from on to off:
+	 * a person drawing, holding a button down is not subject to jittering.
+	 * With that in mind, changing from upper button depressed to lower button
+	 * WILL transition through a jitter delay.
+	 */
+
+	if (aiptek->previousJitterable != jitterable &&
+	    aiptek->curSetting.jitterDelay != 0 && aiptek->inDelay != 1) {
+		aiptek->endDelay = jiffies +
+		    ((aiptek->curSetting.jitterDelay * HZ) / 1000);
+		aiptek->inDelay = 1;
+	}
+	aiptek->previousJitterable = jitterable;
+
+exit:
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval != 0) {
+		err("%s - usb_submit_urb failed with result %d",
+		    __FUNCTION__, retval);
+	}
+}
+
+/***********************************************************************
+ * These are the USB id's known so far. We do not identify them to
+ * specific Aiptek model numbers, because there has been overlaps,
+ * use, and reuse of id's in existing models. Certain models have
+ * been known to use more than one ID, indicative perhaps of
+ * manufacturing revisions. In any event, we consider these
+ * IDs to not be model-specific nor unique.
+ */
+static const struct usb_device_id aiptek_ids[] = {
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x01)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x10)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x20)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x21)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)},
+	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)},
+	{}
+};
+
+MODULE_DEVICE_TABLE(usb, aiptek_ids);
+
+/***********************************************************************
+ * Open an instance of the tablet driver.
+ */
+static int aiptek_open(struct input_dev *inputdev)
+{
+	struct aiptek *aiptek = input_get_drvdata(inputdev);
+
+	aiptek->urb->dev = aiptek->usbdev;
+	if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0)
+		return -EIO;
+
+	return 0;
+}
+
+/***********************************************************************
+ * Close an instance of the tablet driver.
+ */
+static void aiptek_close(struct input_dev *inputdev)
+{
+	struct aiptek *aiptek = input_get_drvdata(inputdev);
+
+	usb_kill_urb(aiptek->urb);
+}
+
+/***********************************************************************
+ * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x,
+ * where they were known as usb_set_report and usb_get_report.
+ */
+static int
+aiptek_set_report(struct aiptek *aiptek,
+		  unsigned char report_type,
+		  unsigned char report_id, void *buffer, int size)
+{
+	return usb_control_msg(aiptek->usbdev,
+			       usb_sndctrlpipe(aiptek->usbdev, 0),
+			       USB_REQ_SET_REPORT,
+			       USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+			       USB_DIR_OUT, (report_type << 8) + report_id,
+			       aiptek->ifnum, buffer, size, 5000);
+}
+
+static int
+aiptek_get_report(struct aiptek *aiptek,
+		  unsigned char report_type,
+		  unsigned char report_id, void *buffer, int size)
+{
+	return usb_control_msg(aiptek->usbdev,
+			       usb_rcvctrlpipe(aiptek->usbdev, 0),
+			       USB_REQ_GET_REPORT,
+			       USB_TYPE_CLASS | USB_RECIP_INTERFACE |
+			       USB_DIR_IN, (report_type << 8) + report_id,
+			       aiptek->ifnum, buffer, size, 5000);
+}
+
+/***********************************************************************
+ * Send a command to the tablet.
+ */
+static int
+aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data)
+{
+	const int sizeof_buf = 3 * sizeof(u8);
+	int ret;
+	u8 *buf;
+
+	buf = kmalloc(sizeof_buf, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = 2;
+	buf[1] = command;
+	buf[2] = data;
+
+	if ((ret =
+	     aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
+		dbg("aiptek_program: failed, tried to send: 0x%02x 0x%02x",
+		    command, data);
+	}
+	kfree(buf);
+	return ret < 0 ? ret : 0;
+}
+
+/***********************************************************************
+ * Retrieve information from the tablet. Querying info is defined as first
+ * sending the {command,data} sequence as a command, followed by a wait
+ * (aka, "programmaticDelay") and then a "read" request.
+ */
+static int
+aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data)
+{
+	const int sizeof_buf = 3 * sizeof(u8);
+	int ret;
+	u8 *buf;
+
+	buf = kmalloc(sizeof_buf, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = 2;
+	buf[1] = command;
+	buf[2] = data;
+
+	if (aiptek_command(aiptek, command, data) != 0) {
+		kfree(buf);
+		return -EIO;
+	}
+	msleep(aiptek->curSetting.programmableDelay);
+
+	if ((ret =
+	     aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
+		dbg("aiptek_query failed: returned 0x%02x 0x%02x 0x%02x",
+		    buf[0], buf[1], buf[2]);
+		ret = -EIO;
+	} else {
+		ret = le16_to_cpu(get_unaligned((__le16 *) (buf + 1)));
+	}
+	kfree(buf);
+	return ret;
+}
+
+/***********************************************************************
+ * Program the tablet into either absolute or relative mode.
+ * We also get information about the tablet's size.
+ */
+static int aiptek_program_tablet(struct aiptek *aiptek)
+{
+	int ret;
+	/* Execute Resolution500LPI */
+	if ((ret = aiptek_command(aiptek, 0x18, 0x04)) < 0)
+		return ret;
+
+	/* Query getModelCode */
+	if ((ret = aiptek_query(aiptek, 0x02, 0x00)) < 0)
+		return ret;
+	aiptek->features.modelCode = ret & 0xff;
+
+	/* Query getODMCode */
+	if ((ret = aiptek_query(aiptek, 0x03, 0x00)) < 0)
+		return ret;
+	aiptek->features.odmCode = ret;
+
+	/* Query getFirmwareCode */
+	if ((ret = aiptek_query(aiptek, 0x04, 0x00)) < 0)
+		return ret;
+	aiptek->features.firmwareCode = ret;
+
+	/* Query getXextension */
+	if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
+		return ret;
+	aiptek->inputdev->absmin[ABS_X] = 0;
+	aiptek->inputdev->absmax[ABS_X] = ret - 1;
+
+	/* Query getYextension */
+	if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
+		return ret;
+	aiptek->inputdev->absmin[ABS_Y] = 0;
+	aiptek->inputdev->absmax[ABS_Y] = ret - 1;
+
+	/* Query getPressureLevels */
+	if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
+		return ret;
+	aiptek->inputdev->absmin[ABS_PRESSURE] = 0;
+	aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1;
+
+	/* Depending on whether we are in absolute or relative mode, we will
+	 * do a switchToTablet(absolute) or switchToMouse(relative) command.
+	 */
+	if (aiptek->curSetting.coordinateMode ==
+	    AIPTEK_COORDINATE_ABSOLUTE_MODE) {
+		/* Execute switchToTablet */
+		if ((ret = aiptek_command(aiptek, 0x10, 0x01)) < 0) {
+			return ret;
+		}
+	} else {
+		/* Execute switchToMouse */
+		if ((ret = aiptek_command(aiptek, 0x10, 0x00)) < 0) {
+			return ret;
+		}
+	}
+
+	/* Enable the macro keys */
+	if ((ret = aiptek_command(aiptek, 0x11, 0x02)) < 0)
+		return ret;
+#if 0
+	/* Execute FilterOn */
+	if ((ret = aiptek_command(aiptek, 0x17, 0x00)) < 0)
+		return ret;
+#endif
+
+	/* Execute AutoGainOn */
+	if ((ret = aiptek_command(aiptek, 0x12, 0xff)) < 0)
+		return ret;
+
+	/* Reset the eventCount, so we track events from last (re)programming
+	 */
+	aiptek->diagnostic = AIPTEK_DIAGNOSTIC_NA;
+	aiptek->eventCount = 0;
+
+	return 0;
+}
+
+/***********************************************************************
+ * Sysfs functions. Sysfs prefers that individually-tunable parameters
+ * exist in their separate pseudo-files. Summary data that is immutable
+ * may exist in a singular file so long as you don't define a writeable
+ * interface.
+ */
+
+/***********************************************************************
+ * support the 'size' file -- display support
+ */
+static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "%dx%d\n",
+			aiptek->inputdev->absmax[ABS_X] + 1,
+			aiptek->inputdev->absmax[ABS_Y] + 1);
+}
+
+/* These structs define the sysfs files, param #1 is the name of the
+ * file, param 2 is the file permissions, param 3 & 4 are to the
+ * output generator and input parser routines. Absence of a routine is
+ * permitted -- it only means can't either 'cat' the file, or send data
+ * to it.
+ */
+static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL);
+
+/***********************************************************************
+ * support routines for the 'product_id' file
+ */
+static ssize_t show_tabletProductId(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n",
+			aiptek->inputdev->id.product);
+}
+
+static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL);
+
+/***********************************************************************
+ * support routines for the 'vendor_id' file
+ */
+static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor);
+}
+
+static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL);
+
+/***********************************************************************
+ * support routines for the 'vendor' file
+ */
+static ssize_t show_tabletManufacturer(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int retval;
+
+	if (aiptek == NULL)
+		return 0;
+
+	retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->manufacturer);
+	return retval;
+}
+
+static DEVICE_ATTR(vendor, S_IRUGO, show_tabletManufacturer, NULL);
+
+/***********************************************************************
+ * support routines for the 'product' file
+ */
+static ssize_t show_tabletProduct(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int retval;
+
+	if (aiptek == NULL)
+		return 0;
+
+	retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->product);
+	return retval;
+}
+
+static DEVICE_ATTR(product, S_IRUGO, show_tabletProduct, NULL);
+
+/***********************************************************************
+ * support routines for the 'pointer_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	char *s;
+
+	if (aiptek == NULL)
+		return 0;
+
+	switch (aiptek->curSetting.pointerMode) {
+	case AIPTEK_POINTER_ONLY_STYLUS_MODE:
+		s = "stylus";
+		break;
+
+	case AIPTEK_POINTER_ONLY_MOUSE_MODE:
+		s = "mouse";
+		break;
+
+	case AIPTEK_POINTER_EITHER_MODE:
+		s = "either";
+		break;
+
+	default:
+		s = "unknown";
+		break;
+	}
+	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+}
+
+static ssize_t
+store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	if (aiptek == NULL)
+		return 0;
+
+	if (strcmp(buf, "stylus") == 0) {
+		aiptek->newSetting.pointerMode =
+		    AIPTEK_POINTER_ONLY_STYLUS_MODE;
+	} else if (strcmp(buf, "mouse") == 0) {
+		aiptek->newSetting.pointerMode = AIPTEK_POINTER_ONLY_MOUSE_MODE;
+	} else if (strcmp(buf, "either") == 0) {
+		aiptek->newSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE;
+	}
+	return count;
+}
+
+static DEVICE_ATTR(pointer_mode,
+		   S_IRUGO | S_IWUGO,
+		   show_tabletPointerMode, store_tabletPointerMode);
+
+/***********************************************************************
+ * support routines for the 'coordinate_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	char *s;
+
+	if (aiptek == NULL)
+		return 0;
+
+	switch (aiptek->curSetting.coordinateMode) {
+	case AIPTEK_COORDINATE_ABSOLUTE_MODE:
+		s = "absolute";
+		break;
+
+	case AIPTEK_COORDINATE_RELATIVE_MODE:
+		s = "relative";
+		break;
+
+	default:
+		s = "unknown";
+		break;
+	}
+	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+}
+
+static ssize_t
+store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	if (aiptek == NULL)
+		return 0;
+
+	if (strcmp(buf, "absolute") == 0) {
+		aiptek->newSetting.pointerMode =
+		    AIPTEK_COORDINATE_ABSOLUTE_MODE;
+	} else if (strcmp(buf, "relative") == 0) {
+		aiptek->newSetting.pointerMode =
+		    AIPTEK_COORDINATE_RELATIVE_MODE;
+	}
+	return count;
+}
+
+static DEVICE_ATTR(coordinate_mode,
+		   S_IRUGO | S_IWUGO,
+		   show_tabletCoordinateMode, store_tabletCoordinateMode);
+
+/***********************************************************************
+ * support routines for the 'tool_mode' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	char *s;
+
+	if (aiptek == NULL)
+		return 0;
+
+	switch (TOOL_BUTTON(aiptek->curSetting.toolMode)) {
+	case AIPTEK_TOOL_BUTTON_MOUSE_MODE:
+		s = "mouse";
+		break;
+
+	case AIPTEK_TOOL_BUTTON_ERASER_MODE:
+		s = "eraser";
+		break;
+
+	case AIPTEK_TOOL_BUTTON_PENCIL_MODE:
+		s = "pencil";
+		break;
+
+	case AIPTEK_TOOL_BUTTON_PEN_MODE:
+		s = "pen";
+		break;
+
+	case AIPTEK_TOOL_BUTTON_BRUSH_MODE:
+		s = "brush";
+		break;
+
+	case AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE:
+		s = "airbrush";
+		break;
+
+	case AIPTEK_TOOL_BUTTON_LENS_MODE:
+		s = "lens";
+		break;
+
+	default:
+		s = "unknown";
+		break;
+	}
+	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+}
+
+static ssize_t
+store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	if (aiptek == NULL)
+		return 0;
+
+	if (strcmp(buf, "mouse") == 0) {
+		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_MOUSE_MODE;
+	} else if (strcmp(buf, "eraser") == 0) {
+		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_ERASER_MODE;
+	} else if (strcmp(buf, "pencil") == 0) {
+		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PENCIL_MODE;
+	} else if (strcmp(buf, "pen") == 0) {
+		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE;
+	} else if (strcmp(buf, "brush") == 0) {
+		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_BRUSH_MODE;
+	} else if (strcmp(buf, "airbrush") == 0) {
+		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE;
+	} else if (strcmp(buf, "lens") == 0) {
+		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_LENS_MODE;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(tool_mode,
+		   S_IRUGO | S_IWUGO,
+		   show_tabletToolMode, store_tabletToolMode);
+
+/***********************************************************************
+ * support routines for the 'xtilt' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) {
+		return snprintf(buf, PAGE_SIZE, "disable\n");
+	} else {
+		return snprintf(buf, PAGE_SIZE, "%d\n",
+				aiptek->curSetting.xTilt);
+	}
+}
+
+static ssize_t
+store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int x;
+
+	if (aiptek == NULL)
+		return 0;
+
+	if (strcmp(buf, "disable") == 0) {
+		aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE;
+	} else {
+		x = (int)simple_strtol(buf, NULL, 10);
+		if (x >= AIPTEK_TILT_MIN && x <= AIPTEK_TILT_MAX) {
+			aiptek->newSetting.xTilt = x;
+		}
+	}
+	return count;
+}
+
+static DEVICE_ATTR(xtilt,
+		   S_IRUGO | S_IWUGO, show_tabletXtilt, store_tabletXtilt);
+
+/***********************************************************************
+ * support routines for the 'ytilt' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) {
+		return snprintf(buf, PAGE_SIZE, "disable\n");
+	} else {
+		return snprintf(buf, PAGE_SIZE, "%d\n",
+				aiptek->curSetting.yTilt);
+	}
+}
+
+static ssize_t
+store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	int y;
+
+	if (aiptek == NULL)
+		return 0;
+
+	if (strcmp(buf, "disable") == 0) {
+		aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE;
+	} else {
+		y = (int)simple_strtol(buf, NULL, 10);
+		if (y >= AIPTEK_TILT_MIN && y <= AIPTEK_TILT_MAX) {
+			aiptek->newSetting.yTilt = y;
+		}
+	}
+	return count;
+}
+
+static DEVICE_ATTR(ytilt,
+		   S_IRUGO | S_IWUGO, show_tabletYtilt, store_tabletYtilt);
+
+/***********************************************************************
+ * support routines for the 'jitter' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay);
+}
+
+static ssize_t
+store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	aiptek->newSetting.jitterDelay = (int)simple_strtol(buf, NULL, 10);
+	return count;
+}
+
+static DEVICE_ATTR(jitter,
+		   S_IRUGO | S_IWUGO,
+		   show_tabletJitterDelay, store_tabletJitterDelay);
+
+/***********************************************************************
+ * support routines for the 'delay' file. Note that this file
+ * both displays current setting and allows reprogramming.
+ */
+static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n",
+			aiptek->curSetting.programmableDelay);
+}
+
+static ssize_t
+store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	aiptek->newSetting.programmableDelay = (int)simple_strtol(buf, NULL, 10);
+	return count;
+}
+
+static DEVICE_ATTR(delay,
+		   S_IRUGO | S_IWUGO,
+		   show_tabletProgrammableDelay, store_tabletProgrammableDelay);
+
+/***********************************************************************
+ * support routines for the 'input_path' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletInputDevice(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "/dev/input/%s\n",
+			aiptek->features.inputPath);
+}
+
+static DEVICE_ATTR(input_path, S_IRUGO, show_tabletInputDevice, NULL);
+
+/***********************************************************************
+ * support routines for the 'event_count' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount);
+}
+
+static DEVICE_ATTR(event_count, S_IRUGO, show_tabletEventsReceived, NULL);
+
+/***********************************************************************
+ * support routines for the 'diagnostic' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	char *retMsg;
+
+	if (aiptek == NULL)
+		return 0;
+
+	switch (aiptek->diagnostic) {
+	case AIPTEK_DIAGNOSTIC_NA:
+		retMsg = "no errors\n";
+		break;
+
+	case AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE:
+		retMsg = "Error: receiving relative reports\n";
+		break;
+
+	case AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE:
+		retMsg = "Error: receiving absolute reports\n";
+		break;
+
+	case AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED:
+		if (aiptek->curSetting.pointerMode ==
+		    AIPTEK_POINTER_ONLY_MOUSE_MODE) {
+			retMsg = "Error: receiving stylus reports\n";
+		} else {
+			retMsg = "Error: receiving mouse reports\n";
+		}
+		break;
+
+	default:
+		return 0;
+	}
+	return snprintf(buf, PAGE_SIZE, retMsg);
+}
+
+static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL);
+
+/***********************************************************************
+ * support routines for the 'stylus_upper' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	char *s;
+
+	if (aiptek == NULL)
+		return 0;
+
+	switch (aiptek->curSetting.stylusButtonUpper) {
+	case AIPTEK_STYLUS_UPPER_BUTTON:
+		s = "upper";
+		break;
+
+	case AIPTEK_STYLUS_LOWER_BUTTON:
+		s = "lower";
+		break;
+
+	default:
+		s = "unknown";
+		break;
+	}
+	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+}
+
+static ssize_t
+store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	if (strcmp(buf, "upper") == 0) {
+		aiptek->newSetting.stylusButtonUpper =
+		    AIPTEK_STYLUS_UPPER_BUTTON;
+	} else if (strcmp(buf, "lower") == 0) {
+		aiptek->newSetting.stylusButtonUpper =
+		    AIPTEK_STYLUS_LOWER_BUTTON;
+	}
+	return count;
+}
+
+static DEVICE_ATTR(stylus_upper,
+		   S_IRUGO | S_IWUGO,
+		   show_tabletStylusUpper, store_tabletStylusUpper);
+
+/***********************************************************************
+ * support routines for the 'stylus_lower' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	char *s;
+
+	if (aiptek == NULL)
+		return 0;
+
+	switch (aiptek->curSetting.stylusButtonLower) {
+	case AIPTEK_STYLUS_UPPER_BUTTON:
+		s = "upper";
+		break;
+
+	case AIPTEK_STYLUS_LOWER_BUTTON:
+		s = "lower";
+		break;
+
+	default:
+		s = "unknown";
+		break;
+	}
+	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+}
+
+static ssize_t
+store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	if (strcmp(buf, "upper") == 0) {
+		aiptek->newSetting.stylusButtonLower =
+		    AIPTEK_STYLUS_UPPER_BUTTON;
+	} else if (strcmp(buf, "lower") == 0) {
+		aiptek->newSetting.stylusButtonLower =
+		    AIPTEK_STYLUS_LOWER_BUTTON;
+	}
+	return count;
+}
+
+static DEVICE_ATTR(stylus_lower,
+		   S_IRUGO | S_IWUGO,
+		   show_tabletStylusLower, store_tabletStylusLower);
+
+/***********************************************************************
+ * support routines for the 'mouse_left' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	char *s;
+
+	if (aiptek == NULL)
+		return 0;
+
+	switch (aiptek->curSetting.mouseButtonLeft) {
+	case AIPTEK_MOUSE_LEFT_BUTTON:
+		s = "left";
+		break;
+
+	case AIPTEK_MOUSE_MIDDLE_BUTTON:
+		s = "middle";
+		break;
+
+	case AIPTEK_MOUSE_RIGHT_BUTTON:
+		s = "right";
+		break;
+
+	default:
+		s = "unknown";
+		break;
+	}
+	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+}
+
+static ssize_t
+store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	if (strcmp(buf, "left") == 0) {
+		aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON;
+	} else if (strcmp(buf, "middle") == 0) {
+		aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_MIDDLE_BUTTON;
+	} else if (strcmp(buf, "right") == 0) {
+		aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_RIGHT_BUTTON;
+	}
+	return count;
+}
+
+static DEVICE_ATTR(mouse_left,
+		   S_IRUGO | S_IWUGO,
+		   show_tabletMouseLeft, store_tabletMouseLeft);
+
+/***********************************************************************
+ * support routines for the 'mouse_middle' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	char *s;
+
+	if (aiptek == NULL)
+		return 0;
+
+	switch (aiptek->curSetting.mouseButtonMiddle) {
+	case AIPTEK_MOUSE_LEFT_BUTTON:
+		s = "left";
+		break;
+
+	case AIPTEK_MOUSE_MIDDLE_BUTTON:
+		s = "middle";
+		break;
+
+	case AIPTEK_MOUSE_RIGHT_BUTTON:
+		s = "right";
+		break;
+
+	default:
+		s = "unknown";
+		break;
+	}
+	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+}
+
+static ssize_t
+store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	if (strcmp(buf, "left") == 0) {
+		aiptek->newSetting.mouseButtonMiddle = AIPTEK_MOUSE_LEFT_BUTTON;
+	} else if (strcmp(buf, "middle") == 0) {
+		aiptek->newSetting.mouseButtonMiddle =
+		    AIPTEK_MOUSE_MIDDLE_BUTTON;
+	} else if (strcmp(buf, "right") == 0) {
+		aiptek->newSetting.mouseButtonMiddle =
+		    AIPTEK_MOUSE_RIGHT_BUTTON;
+	}
+	return count;
+}
+
+static DEVICE_ATTR(mouse_middle,
+		   S_IRUGO | S_IWUGO,
+		   show_tabletMouseMiddle, store_tabletMouseMiddle);
+
+/***********************************************************************
+ * support routines for the 'mouse_right' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+	char *s;
+
+	if (aiptek == NULL)
+		return 0;
+
+	switch (aiptek->curSetting.mouseButtonRight) {
+	case AIPTEK_MOUSE_LEFT_BUTTON:
+		s = "left";
+		break;
+
+	case AIPTEK_MOUSE_MIDDLE_BUTTON:
+		s = "middle";
+		break;
+
+	case AIPTEK_MOUSE_RIGHT_BUTTON:
+		s = "right";
+		break;
+
+	default:
+		s = "unknown";
+		break;
+	}
+	return snprintf(buf, PAGE_SIZE, "%s\n", s);
+}
+
+static ssize_t
+store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	if (strcmp(buf, "left") == 0) {
+		aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_LEFT_BUTTON;
+	} else if (strcmp(buf, "middle") == 0) {
+		aiptek->newSetting.mouseButtonRight =
+		    AIPTEK_MOUSE_MIDDLE_BUTTON;
+	} else if (strcmp(buf, "right") == 0) {
+		aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON;
+	}
+	return count;
+}
+
+static DEVICE_ATTR(mouse_right,
+		   S_IRUGO | S_IWUGO,
+		   show_tabletMouseRight, store_tabletMouseRight);
+
+/***********************************************************************
+ * support routines for the 'wheel' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) {
+		return snprintf(buf, PAGE_SIZE, "disable\n");
+	} else {
+		return snprintf(buf, PAGE_SIZE, "%d\n",
+				aiptek->curSetting.wheel);
+	}
+}
+
+static ssize_t
+store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	aiptek->newSetting.wheel = (int)simple_strtol(buf, NULL, 10);
+	return count;
+}
+
+static DEVICE_ATTR(wheel,
+		   S_IRUGO | S_IWUGO, show_tabletWheel, store_tabletWheel);
+
+/***********************************************************************
+ * support routines for the 'execute' file. Note that this file
+ * both displays current setting and allows for setting changing.
+ */
+static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	/* There is nothing useful to display, so a one-line manual
+	 * is in order...
+	 */
+	return snprintf(buf, PAGE_SIZE,
+			"Write anything to this file to program your tablet.\n");
+}
+
+static ssize_t
+store_tabletExecute(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	/* We do not care what you write to this file. Merely the action
+	 * of writing to this file triggers a tablet reprogramming.
+	 */
+	memcpy(&aiptek->curSetting, &aiptek->newSetting,
+	       sizeof(struct aiptek_settings));
+
+	if (aiptek_program_tablet(aiptek) < 0)
+		return -EIO;
+
+	return count;
+}
+
+static DEVICE_ATTR(execute,
+		   S_IRUGO | S_IWUGO, show_tabletExecute, store_tabletExecute);
+
+/***********************************************************************
+ * support routines for the 'odm_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode);
+}
+
+static DEVICE_ATTR(odm_code, S_IRUGO, show_tabletODMCode, NULL);
+
+/***********************************************************************
+ * support routines for the 'model_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode);
+}
+
+static DEVICE_ATTR(model_code, S_IRUGO, show_tabletModelCode, NULL);
+
+/***********************************************************************
+ * support routines for the 'firmware_code' file. Note that this file
+ * only displays current setting.
+ */
+static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct aiptek *aiptek = dev_get_drvdata(dev);
+
+	if (aiptek == NULL)
+		return 0;
+
+	return snprintf(buf, PAGE_SIZE, "%04x\n",
+			aiptek->features.firmwareCode);
+}
+
+static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL);
+
+/***********************************************************************
+ * This routine removes all existing sysfs files managed by this device
+ * driver.
+ */
+static void aiptek_delete_files(struct device *dev)
+{
+	device_remove_file(dev, &dev_attr_size);
+	device_remove_file(dev, &dev_attr_product_id);
+	device_remove_file(dev, &dev_attr_vendor_id);
+	device_remove_file(dev, &dev_attr_vendor);
+	device_remove_file(dev, &dev_attr_product);
+	device_remove_file(dev, &dev_attr_pointer_mode);
+	device_remove_file(dev, &dev_attr_coordinate_mode);
+	device_remove_file(dev, &dev_attr_tool_mode);
+	device_remove_file(dev, &dev_attr_xtilt);
+	device_remove_file(dev, &dev_attr_ytilt);
+	device_remove_file(dev, &dev_attr_jitter);
+	device_remove_file(dev, &dev_attr_delay);
+	device_remove_file(dev, &dev_attr_input_path);
+	device_remove_file(dev, &dev_attr_event_count);
+	device_remove_file(dev, &dev_attr_diagnostic);
+	device_remove_file(dev, &dev_attr_odm_code);
+	device_remove_file(dev, &dev_attr_model_code);
+	device_remove_file(dev, &dev_attr_firmware_code);
+	device_remove_file(dev, &dev_attr_stylus_lower);
+	device_remove_file(dev, &dev_attr_stylus_upper);
+	device_remove_file(dev, &dev_attr_mouse_left);
+	device_remove_file(dev, &dev_attr_mouse_middle);
+	device_remove_file(dev, &dev_attr_mouse_right);
+	device_remove_file(dev, &dev_attr_wheel);
+	device_remove_file(dev, &dev_attr_execute);
+}
+
+/***********************************************************************
+ * This routine creates the sysfs files managed by this device
+ * driver.
+ */
+static int aiptek_add_files(struct device *dev)
+{
+	int ret;
+
+	if ((ret = device_create_file(dev, &dev_attr_size)) ||
+	    (ret = device_create_file(dev, &dev_attr_product_id)) ||
+	    (ret = device_create_file(dev, &dev_attr_vendor_id)) ||
+	    (ret = device_create_file(dev, &dev_attr_vendor)) ||
+	    (ret = device_create_file(dev, &dev_attr_product)) ||
+	    (ret = device_create_file(dev, &dev_attr_pointer_mode)) ||
+	    (ret = device_create_file(dev, &dev_attr_coordinate_mode)) ||
+	    (ret = device_create_file(dev, &dev_attr_tool_mode)) ||
+	    (ret = device_create_file(dev, &dev_attr_xtilt)) ||
+	    (ret = device_create_file(dev, &dev_attr_ytilt)) ||
+	    (ret = device_create_file(dev, &dev_attr_jitter)) ||
+	    (ret = device_create_file(dev, &dev_attr_delay)) ||
+	    (ret = device_create_file(dev, &dev_attr_input_path)) ||
+	    (ret = device_create_file(dev, &dev_attr_event_count)) ||
+	    (ret = device_create_file(dev, &dev_attr_diagnostic)) ||
+	    (ret = device_create_file(dev, &dev_attr_odm_code)) ||
+	    (ret = device_create_file(dev, &dev_attr_model_code)) ||
+	    (ret = device_create_file(dev, &dev_attr_firmware_code)) ||
+	    (ret = device_create_file(dev, &dev_attr_stylus_lower)) ||
+	    (ret = device_create_file(dev, &dev_attr_stylus_upper)) ||
+	    (ret = device_create_file(dev, &dev_attr_mouse_left)) ||
+	    (ret = device_create_file(dev, &dev_attr_mouse_middle)) ||
+	    (ret = device_create_file(dev, &dev_attr_mouse_right)) ||
+	    (ret = device_create_file(dev, &dev_attr_wheel)) ||
+	    (ret = device_create_file(dev, &dev_attr_execute))) {
+		err("aiptek: killing own sysfs device files\n");
+		aiptek_delete_files(dev);
+	}
+	return ret;
+}
+
+/***********************************************************************
+ * This routine is called when a tablet has been identified. It basically
+ * sets up the tablet and the driver's internal structures.
+ */
+static int
+aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct aiptek *aiptek;
+	struct input_dev *inputdev;
+	struct input_handle *inputhandle;
+	struct list_head *node, *next;
+	int i;
+	int speeds[] = { 0,
+		AIPTEK_PROGRAMMABLE_DELAY_50,
+		AIPTEK_PROGRAMMABLE_DELAY_400,
+		AIPTEK_PROGRAMMABLE_DELAY_25,
+		AIPTEK_PROGRAMMABLE_DELAY_100,
+		AIPTEK_PROGRAMMABLE_DELAY_200,
+		AIPTEK_PROGRAMMABLE_DELAY_300
+	};
+	int err = -ENOMEM;
+
+	/* programmableDelay is where the command-line specified
+	 * delay is kept. We make it the first element of speeds[],
+	 * so therefore, your override speed is tried first, then the
+	 * remainder. Note that the default value of 400ms will be tried
+	 * if you do not specify any command line parameter.
+	 */
+	speeds[0] = programmableDelay;
+
+	aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL);
+	inputdev = input_allocate_device();
+	if (!aiptek || !inputdev)
+		goto fail1;
+
+	aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH,
+					GFP_ATOMIC, &aiptek->data_dma);
+	if (!aiptek->data)
+		goto fail1;
+
+	aiptek->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!aiptek->urb)
+		goto fail2;
+
+	aiptek->inputdev = inputdev;
+	aiptek->usbdev = usbdev;
+	aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
+	aiptek->inDelay = 0;
+	aiptek->endDelay = 0;
+	aiptek->previousJitterable = 0;
+
+	/* Set up the curSettings struct. Said struct contains the current
+	 * programmable parameters. The newSetting struct contains changes
+	 * the user makes to the settings via the sysfs interface. Those
+	 * changes are not "committed" to curSettings until the user
+	 * writes to the sysfs/.../execute file.
+	 */
+	aiptek->curSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE;
+	aiptek->curSetting.coordinateMode = AIPTEK_COORDINATE_ABSOLUTE_MODE;
+	aiptek->curSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE;
+	aiptek->curSetting.xTilt = AIPTEK_TILT_DISABLE;
+	aiptek->curSetting.yTilt = AIPTEK_TILT_DISABLE;
+	aiptek->curSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON;
+	aiptek->curSetting.mouseButtonMiddle = AIPTEK_MOUSE_MIDDLE_BUTTON;
+	aiptek->curSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON;
+	aiptek->curSetting.stylusButtonUpper = AIPTEK_STYLUS_UPPER_BUTTON;
+	aiptek->curSetting.stylusButtonLower = AIPTEK_STYLUS_LOWER_BUTTON;
+	aiptek->curSetting.jitterDelay = jitterDelay;
+	aiptek->curSetting.programmableDelay = programmableDelay;
+
+	/* Both structs should have equivalent settings
+	 */
+	aiptek->newSetting = aiptek->curSetting;
+
+	/* Determine the usb devices' physical path.
+	 * Asketh not why we always pretend we're using "../input0",
+	 * but I suspect this will have to be refactored one
+	 * day if a single USB device can be a keyboard & a mouse
+	 * & a tablet, and the inputX number actually will tell
+	 * us something...
+	 */
+	usb_make_path(usbdev, aiptek->features.usbPath,
+			sizeof(aiptek->features.usbPath));
+	strlcat(aiptek->features.usbPath, "/input0",
+		sizeof(aiptek->features.usbPath));
+
+	/* Set up client data, pointers to open and close routines
+	 * for the input device.
+	 */
+	inputdev->name = "Aiptek";
+	inputdev->phys = aiptek->features.usbPath;
+	usb_to_input_id(usbdev, &inputdev->id);
+	inputdev->dev.parent = &intf->dev;
+
+	input_set_drvdata(inputdev, aiptek);
+
+	inputdev->open = aiptek_open;
+	inputdev->close = aiptek_close;
+
+	/* Now program the capacities of the tablet, in terms of being
+	 * an input device.
+	 */
+	inputdev->evbit[0] |= BIT(EV_KEY)
+	    | BIT(EV_ABS)
+	    | BIT(EV_REL)
+	    | BIT(EV_MSC);
+
+	inputdev->absbit[0] |= BIT(ABS_MISC);
+
+	inputdev->relbit[0] |=
+	    (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC));
+
+	inputdev->keybit[LONG(BTN_LEFT)] |=
+	    (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE));
+
+	inputdev->keybit[LONG(BTN_DIGI)] |=
+	    (BIT(BTN_TOOL_PEN) |
+	     BIT(BTN_TOOL_RUBBER) |
+	     BIT(BTN_TOOL_PENCIL) |
+	     BIT(BTN_TOOL_AIRBRUSH) |
+	     BIT(BTN_TOOL_BRUSH) |
+	     BIT(BTN_TOOL_MOUSE) |
+	     BIT(BTN_TOOL_LENS) |
+	     BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2));
+
+	inputdev->mscbit[0] = BIT(MSC_SERIAL);
+
+	/* Programming the tablet macro keys needs to be done with a for loop
+	 * as the keycodes are discontiguous.
+	 */
+	for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i)
+		set_bit(macroKeyEvents[i], inputdev->keybit);
+
+	/*
+	 * Program the input device coordinate capacities. We do not yet
+	 * know what maximum X, Y, and Z values are, so we're putting fake
+	 * values in. Later, we'll ask the tablet to put in the correct
+	 * values.
+	 */
+	input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0);
+	input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0);
+	input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0);
+	input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+	input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
+	input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
+
+	endpoint = &intf->altsetting[0].endpoint[0].desc;
+
+	/* Go set up our URB, which is called when the tablet receives
+	 * input.
+	 */
+	usb_fill_int_urb(aiptek->urb,
+			 aiptek->usbdev,
+			 usb_rcvintpipe(aiptek->usbdev,
+					endpoint->bEndpointAddress),
+			 aiptek->data, 8, aiptek_irq, aiptek,
+			 endpoint->bInterval);
+
+	aiptek->urb->transfer_dma = aiptek->data_dma;
+	aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* Program the tablet. This sets the tablet up in the mode
+	 * specified in newSetting, and also queries the tablet's
+	 * physical capacities.
+	 *
+	 * Sanity check: if a tablet doesn't like the slow programmatic
+	 * delay, we often get sizes of 0x0. Let's use that as an indicator
+	 * to try faster delays, up to 25 ms. If that logic fails, well, you'll
+	 * have to explain to us how your tablet thinks it's 0x0, and yet that's
+	 * not an error :-)
+	 */
+
+	for (i = 0; i < ARRAY_SIZE(speeds); ++i) {
+		aiptek->curSetting.programmableDelay = speeds[i];
+		(void)aiptek_program_tablet(aiptek);
+		if (aiptek->inputdev->absmax[ABS_X] > 0) {
+			info("input: Aiptek using %d ms programming speed\n",
+			     aiptek->curSetting.programmableDelay);
+			break;
+		}
+	}
+
+	/* Register the tablet as an Input Device
+	 */
+	err = input_register_device(aiptek->inputdev);
+	if (err)
+		goto fail2;
+
+	/* We now will look for the evdev device which is mapped to
+	 * the tablet. The partial name is kept in the link list of
+	 * input_handles associated with this input device.
+	 * What identifies an evdev input_handler is that it begins
+	 * with 'event', continues with a digit, and that in turn
+	 * is mapped to input/eventN.
+	 */
+	list_for_each_safe(node, next, &inputdev->h_list) {
+		inputhandle = to_handle(node);
+		if (strncmp(inputhandle->name, "event", 5) == 0) {
+			strcpy(aiptek->features.inputPath, inputhandle->name);
+			break;
+		}
+	}
+
+	/* Associate this driver's struct with the usb interface.
+	 */
+	usb_set_intfdata(intf, aiptek);
+
+	/* Set up the sysfs files
+	 */
+	aiptek_add_files(&intf->dev);
+
+	/* Make sure the evdev module is loaded. Assuming evdev IS a module :-)
+	 */
+	if (request_module("evdev") != 0)
+		info("aiptek: error loading 'evdev' module");
+
+	return 0;
+
+ fail2:	usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
+			aiptek->data_dma);
+ fail1:	input_free_device(inputdev);
+	kfree(aiptek);
+	return err;
+}
+
+/***********************************************************************
+ * Deal with tablet disconnecting from the system.
+ */
+static void aiptek_disconnect(struct usb_interface *intf)
+{
+	struct aiptek *aiptek = usb_get_intfdata(intf);
+
+	/* Disassociate driver's struct with usb interface
+	 */
+	usb_set_intfdata(intf, NULL);
+	if (aiptek != NULL) {
+		/* Free & unhook everything from the system.
+		 */
+		usb_kill_urb(aiptek->urb);
+		input_unregister_device(aiptek->inputdev);
+		aiptek_delete_files(&intf->dev);
+		usb_free_urb(aiptek->urb);
+		usb_buffer_free(interface_to_usbdev(intf),
+				AIPTEK_PACKET_LENGTH,
+				aiptek->data, aiptek->data_dma);
+		kfree(aiptek);
+	}
+}
+
+static struct usb_driver aiptek_driver = {
+	.name = "aiptek",
+	.probe = aiptek_probe,
+	.disconnect = aiptek_disconnect,
+	.id_table = aiptek_ids,
+};
+
+static int __init aiptek_init(void)
+{
+	int result = usb_register(&aiptek_driver);
+	if (result == 0) {
+		info(DRIVER_VERSION ": " DRIVER_AUTHOR);
+		info(DRIVER_DESC);
+	}
+	return result;
+}
+
+static void __exit aiptek_exit(void)
+{
+	usb_deregister(&aiptek_driver);
+}
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(programmableDelay, int, 0);
+MODULE_PARM_DESC(programmableDelay, "delay used during tablet programming");
+module_param(jitterDelay, int, 0);
+MODULE_PARM_DESC(jitterDelay, "stylus/mouse settlement delay");
+
+module_init(aiptek_init);
+module_exit(aiptek_exit);
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
new file mode 100644
index 00000000000..b2ca10f2fe0
--- /dev/null
+++ b/drivers/input/tablet/gtco.c
@@ -0,0 +1,1055 @@
+/*    -*- linux-c -*-
+
+GTCO digitizer USB driver
+
+Use the err(), dbg() and info() macros from usb.h for system logging
+
+TO CHECK:  Is pressure done right on report 5?
+
+Copyright (C) 2006  GTCO CalComp
+
+This program is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License
+as published by the Free Software Foundation; version 2
+of the License.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation, and that the name of GTCO-CalComp not be used in advertising
+or publicity pertaining to distribution of the software without specific,
+written prior permission. GTCO-CalComp makes no representations about the
+suitability of this software for any purpose.  It is provided "as is"
+without express or implied warranty.
+
+GTCO-CALCOMP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+EVENT SHALL GTCO-CALCOMP BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+TORTIOUS ACTIONS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+PERFORMANCE OF THIS SOFTWARE.
+
+GTCO CalComp, Inc.
+7125 Riverwood Drive
+Columbia, MD 21046
+
+Jeremy Roberson jroberson@gtcocalcomp.com
+Scott Hill shill@gtcocalcomp.com
+*/
+
+
+
+/*#define DEBUG*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+
+#include <linux/version.h>
+#include <linux/usb/input.h>
+
+/* Version with a Major number of 2 is for kernel inclusion only. */
+#define  GTCO_VERSION   "2.00.0006"
+
+
+/*   MACROS  */
+
+#define VENDOR_ID_GTCO	      0x078C
+#define PID_400               0x400
+#define PID_401               0x401
+#define PID_1000              0x1000
+#define PID_1001              0x1001
+#define PID_1002              0x1002
+
+/* Max size of a single report */
+#define REPORT_MAX_SIZE       10
+
+
+/* Bitmask whether pen is in range */
+#define MASK_INRANGE 0x20
+#define MASK_BUTTON  0x01F
+
+#define  PATHLENGTH     64
+
+/* DATA STRUCTURES */
+
+/* Device table */
+static struct usb_device_id gtco_usbid_table [] = {
+	{ USB_DEVICE(VENDOR_ID_GTCO, PID_400) },
+	{ USB_DEVICE(VENDOR_ID_GTCO, PID_401) },
+	{ USB_DEVICE(VENDOR_ID_GTCO, PID_1000) },
+	{ USB_DEVICE(VENDOR_ID_GTCO, PID_1001) },
+	{ USB_DEVICE(VENDOR_ID_GTCO, PID_1002) },
+	{ }
+};
+MODULE_DEVICE_TABLE (usb, gtco_usbid_table);
+
+
+/* Structure to hold all of our device specific stuff */
+struct gtco {
+
+	struct input_dev  *inputdevice; /* input device struct pointer  */
+	struct usb_device *usbdev; /* the usb device for this device */
+	struct urb        *urbinfo;	 /* urb for incoming reports      */
+	dma_addr_t        buf_dma;  /* dma addr of the data buffer*/
+	unsigned char *   buffer;   /* databuffer for reports */
+
+	char  usbpath[PATHLENGTH];
+	int   openCount;
+
+	/* Information pulled from Report Descriptor */
+	u32  usage;
+	u32  min_X;
+	u32  max_X;
+	u32  min_Y;
+	u32  max_Y;
+	s8   mintilt_X;
+	s8   maxtilt_X;
+	s8   mintilt_Y;
+	s8   maxtilt_Y;
+	u32  maxpressure;
+	u32  minpressure;
+};
+
+
+
+/*   Code for parsing the HID REPORT DESCRIPTOR          */
+
+/* From HID1.11 spec */
+struct hid_descriptor
+{
+	struct usb_descriptor_header header;
+	__le16   bcdHID;
+	u8       bCountryCode;
+	u8       bNumDescriptors;
+	u8       bDescriptorType;
+	__le16   wDescriptorLength;
+} __attribute__ ((packed));
+
+
+#define HID_DESCRIPTOR_SIZE   9
+#define HID_DEVICE_TYPE       33
+#define REPORT_DEVICE_TYPE    34
+
+
+#define PREF_TAG(x)     ((x)>>4)
+#define PREF_TYPE(x)    ((x>>2)&0x03)
+#define PREF_SIZE(x)    ((x)&0x03)
+
+#define TYPE_MAIN       0
+#define TYPE_GLOBAL     1
+#define TYPE_LOCAL      2
+#define TYPE_RESERVED   3
+
+#define TAG_MAIN_INPUT        0x8
+#define TAG_MAIN_OUTPUT       0x9
+#define TAG_MAIN_FEATURE      0xB
+#define TAG_MAIN_COL_START    0xA
+#define TAG_MAIN_COL_END      0xC
+
+#define TAG_GLOB_USAGE        0
+#define TAG_GLOB_LOG_MIN      1
+#define TAG_GLOB_LOG_MAX      2
+#define TAG_GLOB_PHYS_MIN     3
+#define TAG_GLOB_PHYS_MAX     4
+#define TAG_GLOB_UNIT_EXP     5
+#define TAG_GLOB_UNIT         6
+#define TAG_GLOB_REPORT_SZ    7
+#define TAG_GLOB_REPORT_ID    8
+#define TAG_GLOB_REPORT_CNT   9
+#define TAG_GLOB_PUSH         10
+#define TAG_GLOB_POP          11
+
+#define TAG_GLOB_MAX          12
+
+#define DIGITIZER_USAGE_TIP_PRESSURE   0x30
+#define DIGITIZER_USAGE_TILT_X         0x3D
+#define DIGITIZER_USAGE_TILT_Y         0x3E
+
+
+/*
+ *   This is an abbreviated parser for the HID Report Descriptor.  We
+ *   know what devices we are talking to, so this is by no means meant
+ *   to be generic.  We can make some safe assumptions:
+ *
+ *   - We know there are no LONG tags, all short
+ *   - We know that we have no MAIN Feature and MAIN Output items
+ *   - We know what the IRQ reports are supposed to look like.
+ *
+ *   The main purpose of this is to use the HID report desc to figure
+ *   out the mins and maxs of the fields in the IRQ reports.  The IRQ
+ *   reports for 400/401 change slightly if the max X is bigger than 64K.
+ *
+ */
+static void parse_hid_report_descriptor(struct gtco *device, char * report,
+					int length)
+{
+	int   x, i = 0;
+
+	/* Tag primitive vars */
+	__u8   prefix;
+	__u8   size;
+	__u8   tag;
+	__u8   type;
+	__u8   data   = 0;
+	__u16  data16 = 0;
+	__u32  data32 = 0;
+
+	/* For parsing logic */
+	int   inputnum = 0;
+	__u32 usage = 0;
+
+	/* Global Values, indexed by TAG */
+	__u32 globalval[TAG_GLOB_MAX];
+	__u32 oldval[TAG_GLOB_MAX];
+
+	/* Debug stuff */
+	char  maintype = 'x';
+	char  globtype[12];
+	int   indent = 0;
+	char  indentstr[10] = "";
+
+
+	dbg("======>>>>>>PARSE<<<<<<======");
+
+	/* Walk  this report and pull out the info we need */
+	while (i < length) {
+		prefix = report[i];
+
+		/* Skip over prefix */
+		i++;
+
+		/* Determine data size and save the data in the proper variable */
+		size = PREF_SIZE(prefix);
+		switch (size) {
+		case 1:
+			data = report[i];
+			break;
+		case 2:
+			data16 = le16_to_cpu(get_unaligned((__le16 *)&report[i]));
+			break;
+		case 3:
+			size = 4;
+			data32 = le32_to_cpu(get_unaligned((__le32 *)&report[i]));
+			break;
+		}
+
+		/* Skip size of data */
+		i += size;
+
+		/* What we do depends on the tag type */
+		tag  = PREF_TAG(prefix);
+		type = PREF_TYPE(prefix);
+		switch (type) {
+		case TYPE_MAIN:
+			strcpy(globtype, "");
+			switch (tag) {
+
+			case TAG_MAIN_INPUT:
+				/*
+				 * The INPUT MAIN tag signifies this is
+				 * information from a report.  We need to
+				 * figure out what it is and store the
+				 * min/max values
+				 */
+
+				maintype = 'I';
+				if (data == 2)
+					strcpy(globtype, "Variable");
+				else if (data == 3)
+					strcpy(globtype, "Var|Const");
+
+				dbg("::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits",
+				    globalval[TAG_GLOB_REPORT_ID], inputnum,
+				    globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX],
+				    globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN],
+				    globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]);
+
+
+				/*
+				  We can assume that the first two input items
+				  are always the X and Y coordinates.  After
+				  that, we look for everything else by
+				  local usage value
+				 */
+				switch (inputnum) {
+				case 0:  /* X coord */
+					dbg("GER: X Usage: 0x%x", usage);
+					if (device->max_X == 0) {
+						device->max_X = globalval[TAG_GLOB_LOG_MAX];
+						device->min_X = globalval[TAG_GLOB_LOG_MIN];
+					}
+					break;
+
+				case 1:  /* Y coord */
+					dbg("GER: Y Usage: 0x%x", usage);
+					if (device->max_Y == 0) {
+						device->max_Y = globalval[TAG_GLOB_LOG_MAX];
+						device->min_Y = globalval[TAG_GLOB_LOG_MIN];
+					}
+					break;
+
+				default:
+					/* Tilt X */
+					if (usage == DIGITIZER_USAGE_TILT_X) {
+						if (device->maxtilt_X == 0) {
+							device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX];
+							device->mintilt_X = globalval[TAG_GLOB_LOG_MIN];
+						}
+					}
+
+					/* Tilt Y */
+					if (usage == DIGITIZER_USAGE_TILT_Y) {
+						if (device->maxtilt_Y == 0) {
+							device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX];
+							device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN];
+						}
+					}
+
+					/* Pressure */
+					if (usage == DIGITIZER_USAGE_TIP_PRESSURE) {
+						if (device->maxpressure == 0) {
+							device->maxpressure = globalval[TAG_GLOB_LOG_MAX];
+							device->minpressure = globalval[TAG_GLOB_LOG_MIN];
+						}
+					}
+
+					break;
+				}
+
+				inputnum++;
+				break;
+
+			case TAG_MAIN_OUTPUT:
+				maintype = 'O';
+				break;
+
+			case TAG_MAIN_FEATURE:
+				maintype = 'F';
+				break;
+
+			case TAG_MAIN_COL_START:
+				maintype = 'S';
+
+				if (data == 0) {
+					dbg("======>>>>>> Physical");
+					strcpy(globtype, "Physical");
+				} else
+					dbg("======>>>>>>");
+
+				/* Indent the debug output */
+				indent++;
+				for (x = 0; x < indent; x++)
+					indentstr[x] = '-';
+				indentstr[x] = 0;
+
+				/* Save global tags */
+				for (x = 0; x < TAG_GLOB_MAX; x++)
+					oldval[x] = globalval[x];
+
+				break;
+
+			case TAG_MAIN_COL_END:
+				dbg("<<<<<<======");
+				maintype = 'E';
+				indent--;
+				for (x = 0; x < indent; x++)
+					indentstr[x] = '-';
+				indentstr[x] = 0;
+
+				/* Copy global tags back */
+				for (x = 0; x < TAG_GLOB_MAX; x++)
+					globalval[x] = oldval[x];
+
+				break;
+			}
+
+			switch (size) {
+			case 1:
+				dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
+				    indentstr, tag, maintype, size, globtype, data);
+				break;
+
+			case 2:
+				dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
+				    indentstr, tag, maintype, size, globtype, data16);
+				break;
+
+			case 4:
+				dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
+				    indentstr, tag, maintype, size, globtype, data32);
+				break;
+			}
+			break;
+
+		case TYPE_GLOBAL:
+			switch (tag) {
+			case TAG_GLOB_USAGE:
+				/*
+				 * First time we hit the global usage tag,
+				 * it should tell us the type of device
+				 */
+				if (device->usage == 0)
+					device->usage = data;
+
+				strcpy(globtype, "USAGE");
+				break;
+
+			case TAG_GLOB_LOG_MIN:
+				strcpy(globtype, "LOG_MIN");
+				break;
+
+			case TAG_GLOB_LOG_MAX:
+				strcpy(globtype, "LOG_MAX");
+				break;
+
+			case TAG_GLOB_PHYS_MIN:
+				strcpy(globtype, "PHYS_MIN");
+				break;
+
+			case TAG_GLOB_PHYS_MAX:
+				strcpy(globtype, "PHYS_MAX");
+				break;
+
+			case TAG_GLOB_UNIT_EXP:
+				strcpy(globtype, "EXP");
+				break;
+
+			case TAG_GLOB_UNIT:
+				strcpy(globtype, "UNIT");
+				break;
+
+			case TAG_GLOB_REPORT_SZ:
+				strcpy(globtype, "REPORT_SZ");
+				break;
+
+			case TAG_GLOB_REPORT_ID:
+				strcpy(globtype, "REPORT_ID");
+				/* New report, restart numbering */
+				inputnum = 0;
+				break;
+
+			case TAG_GLOB_REPORT_CNT:
+				strcpy(globtype, "REPORT_CNT");
+				break;
+
+			case TAG_GLOB_PUSH:
+				strcpy(globtype, "PUSH");
+				break;
+
+			case TAG_GLOB_POP:
+				strcpy(globtype, "POP");
+				break;
+			}
+
+			/* Check to make sure we have a good tag number
+			   so we don't overflow array */
+			if (tag < TAG_GLOB_MAX) {
+				switch (size) {
+				case 1:
+					dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
+					    indentstr, globtype, tag, size, data);
+					globalval[tag] = data;
+					break;
+
+				case 2:
+					dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
+					    indentstr, globtype, tag, size, data16);
+					globalval[tag] = data16;
+					break;
+
+				case 4:
+					dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
+					    indentstr, globtype, tag, size, data32);
+					globalval[tag] = data32;
+					break;
+				}
+			} else {
+				dbg("%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d ",
+				    indentstr, tag, size);
+			}
+			break;
+
+		case TYPE_LOCAL:
+			switch (tag) {
+			case TAG_GLOB_USAGE:
+				strcpy(globtype, "USAGE");
+				/* Always 1 byte */
+				usage = data;
+				break;
+
+			case TAG_GLOB_LOG_MIN:
+				strcpy(globtype, "MIN");
+				break;
+
+			case TAG_GLOB_LOG_MAX:
+				strcpy(globtype, "MAX");
+				break;
+
+			default:
+				strcpy(globtype, "UNKNOWN");
+				break;
+			}
+
+			switch (size) {
+			case 1:
+				dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
+				    indentstr, tag, globtype, size, data);
+				break;
+
+			case 2:
+				dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
+				    indentstr, tag, globtype, size, data16);
+				break;
+
+			case 4:
+				dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
+				    indentstr, tag, globtype, size, data32);
+				break;
+			}
+
+			break;
+		}
+	}
+}
+
+/*   INPUT DRIVER Routines                               */
+
+/*
+ * Called when opening the input device.  This will submit the URB to
+ * the usb system so we start getting reports
+ */
+static int gtco_input_open(struct input_dev *inputdev)
+{
+	struct gtco *device = input_get_drvdata(inputdev);
+
+	device->urbinfo->dev = device->usbdev;
+	if (usb_submit_urb(device->urbinfo, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+/*
+ * Called when closing the input device.  This will unlink the URB
+ */
+static void gtco_input_close(struct input_dev *inputdev)
+{
+	struct gtco *device = input_get_drvdata(inputdev);
+
+	usb_kill_urb(device->urbinfo);
+}
+
+
+/*
+ *  Setup input device capabilities.  Tell the input system what this
+ *  device is capable of generating.
+ *
+ *  This information is based on what is read from the HID report and
+ *  placed in the struct gtco structure
+ *
+ */
+static void gtco_setup_caps(struct input_dev *inputdev)
+{
+	struct gtco *device = input_get_drvdata(inputdev);
+
+	/* Which events */
+	inputdev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC);
+
+	/* Misc event menu block */
+	inputdev->mscbit[0] = BIT(MSC_SCAN)|BIT(MSC_SERIAL)|BIT(MSC_RAW) ;
+
+	/* Absolute values based on HID report info */
+	input_set_abs_params(inputdev, ABS_X, device->min_X, device->max_X,
+			     0, 0);
+	input_set_abs_params(inputdev, ABS_Y, device->min_Y, device->max_Y,
+			     0, 0);
+
+	/* Proximity */
+	input_set_abs_params(inputdev, ABS_DISTANCE, 0, 1, 0, 0);
+
+	/* Tilt & pressure */
+	input_set_abs_params(inputdev, ABS_TILT_X, device->mintilt_X,
+			     device->maxtilt_X, 0, 0);
+	input_set_abs_params(inputdev, ABS_TILT_Y, device->mintilt_Y,
+			     device->maxtilt_Y, 0, 0);
+	input_set_abs_params(inputdev, ABS_PRESSURE, device->minpressure,
+			     device->maxpressure, 0, 0);
+
+	/* Transducer */
+	input_set_abs_params(inputdev, ABS_MISC, 0, 0xFF, 0, 0);
+}
+
+/*   USB Routines  */
+
+/*
+ * URB callback routine.  Called when we get IRQ reports from the
+ *  digitizer.
+ *
+ *  This bridges the USB and input device worlds.  It generates events
+ *  on the input device based on the USB reports.
+ */
+static void gtco_urb_callback(struct urb *urbinfo)
+{
+	struct gtco *device = urbinfo->context;
+	struct input_dev  *inputdev;
+	int               rc;
+	u32               val = 0;
+	s8                valsigned = 0;
+	char              le_buffer[2];
+
+	inputdev = device->inputdevice;
+
+	/* Was callback OK? */
+	if (urbinfo->status == -ECONNRESET ||
+	    urbinfo->status == -ENOENT ||
+	    urbinfo->status == -ESHUTDOWN) {
+
+		/* Shutdown is occurring. Return and don't queue up any more */
+		return;
+	}
+
+	if (urbinfo->status != 0) {
+		/*
+		 * Some unknown error.  Hopefully temporary. Just go and
+		 * requeue an URB
+		 */
+		goto resubmit;
+	}
+
+	/*
+	 * Good URB, now process
+	 */
+
+	/* PID dependent when we interpret the report */
+	if (inputdev->id.product == PID_1000 ||
+	    inputdev->id.product == PID_1001 ||
+	    inputdev->id.product == PID_1002) {
+
+		/*
+		 * Switch on the report ID
+		 * Conveniently, the reports have more information, the higher
+		 * the report number.  We can just fall through the case
+		 * statements if we start with the highest number report
+		 */
+		switch (device->buffer[0]) {
+		case 5:
+			/* Pressure is 9 bits */
+			val = ((u16)(device->buffer[8]) << 1);
+			val |= (u16)(device->buffer[7] >> 7);
+			input_report_abs(inputdev, ABS_PRESSURE,
+					 device->buffer[8]);
+
+			/* Mask out the Y tilt value used for pressure */
+			device->buffer[7] = (u8)((device->buffer[7]) & 0x7F);
+
+			/* Fall thru */
+		case 4:
+			/* Tilt */
+
+			/* Sign extend these 7 bit numbers.  */
+			if (device->buffer[6] & 0x40)
+				device->buffer[6] |= 0x80;
+
+			if (device->buffer[7] & 0x40)
+				device->buffer[7] |= 0x80;
+
+
+			valsigned = (device->buffer[6]);
+			input_report_abs(inputdev, ABS_TILT_X, (s32)valsigned);
+
+			valsigned = (device->buffer[7]);
+			input_report_abs(inputdev, ABS_TILT_Y, (s32)valsigned);
+
+			/* Fall thru */
+		case 2:
+		case 3:
+			/* Convert buttons, only 5 bits possible */
+			val = (device->buffer[5]) & MASK_BUTTON;
+
+			/* We don't apply any meaning to the bitmask,
+			   just report */
+			input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+
+			/*  Fall thru */
+		case 1:
+			/* All reports have X and Y coords in the same place */
+			val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[1]));
+			input_report_abs(inputdev, ABS_X, val);
+
+			val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[3]));
+			input_report_abs(inputdev, ABS_Y, val);
+
+			/* Ditto for proximity bit */
+			val = device->buffer[5] & MASK_INRANGE ? 1 : 0;
+			input_report_abs(inputdev, ABS_DISTANCE, val);
+
+			/* Report 1 is an exception to how we handle buttons */
+			/* Buttons are an index, not a bitmask */
+			if (device->buffer[0] == 1) {
+
+				/*
+				 * Convert buttons, 5 bit index
+				 * Report value of index set as one,
+				 * the rest as 0
+				 */
+				val = device->buffer[5] & MASK_BUTTON;
+				dbg("======>>>>>>REPORT 1: val 0x%X(%d)",
+				    val, val);
+
+				/*
+				 * We don't apply any meaning to the button
+				 * index, just report it
+				 */
+				input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+			}
+			break;
+
+		case 7:
+			/* Menu blocks */
+			input_event(inputdev, EV_MSC, MSC_SCAN,
+				    device->buffer[1]);
+			break;
+		}
+	}
+
+	/* Other pid class */
+	if (inputdev->id.product == PID_400 ||
+	    inputdev->id.product == PID_401) {
+
+		/* Report 2 */
+		if (device->buffer[0] == 2) {
+			/* Menu blocks */
+			input_event(inputdev, EV_MSC, MSC_SCAN, device->buffer[1]);
+		}
+
+		/*  Report 1 */
+		if (device->buffer[0] == 1) {
+			char buttonbyte;
+
+			/*  IF X max > 64K, we still a bit from the y report */
+			if (device->max_X > 0x10000) {
+
+				val = (u16)(((u16)(device->buffer[2] << 8)) | (u8)device->buffer[1]);
+				val |= (u32)(((u8)device->buffer[3] & 0x1) << 16);
+
+				input_report_abs(inputdev, ABS_X, val);
+
+				le_buffer[0]  = (u8)((u8)(device->buffer[3]) >> 1);
+				le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7);
+
+				le_buffer[1]  = (u8)(device->buffer[4] >> 1);
+				le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7);
+
+				val = le16_to_cpu(get_unaligned((__le16 *)le_buffer));
+				input_report_abs(inputdev, ABS_Y, val);
+
+				/*
+				 * Shift the button byte right by one to
+				 * make it look like the standard report
+				 */
+				buttonbyte = device->buffer[5] >> 1;
+			} else {
+
+				val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[1]));
+				input_report_abs(inputdev, ABS_X, val);
+
+				val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[3]));
+				input_report_abs(inputdev, ABS_Y, val);
+
+				buttonbyte = device->buffer[5];
+			}
+
+			/* BUTTONS and PROXIMITY */
+			val = buttonbyte & MASK_INRANGE ? 1 : 0;
+			input_report_abs(inputdev, ABS_DISTANCE, val);
+
+			/* Convert buttons, only 4 bits possible */
+			val = buttonbyte & 0x0F;
+#ifdef USE_BUTTONS
+			for (i = 0; i < 5; i++)
+				input_report_key(inputdev, BTN_DIGI + i, val & (1 << i));
+#else
+			/* We don't apply any meaning to the bitmask, just report */
+			input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+#endif
+
+			/* TRANSDUCER */
+			input_report_abs(inputdev, ABS_MISC, device->buffer[6]);
+		}
+	}
+
+	/* Everybody gets report ID's */
+	input_event(inputdev, EV_MSC, MSC_RAW,  device->buffer[0]);
+
+	/* Sync it up */
+	input_sync(inputdev);
+
+ resubmit:
+	rc = usb_submit_urb(urbinfo, GFP_ATOMIC);
+	if (rc != 0)
+		err("usb_submit_urb failed rc=0x%x", rc);
+}
+
+/*
+ *  The probe routine.  This is called when the kernel find the matching USB
+ *   vendor/product.  We do the following:
+ *
+ *    - Allocate mem for a local structure to manage the device
+ *    - Request a HID Report Descriptor from the device and parse it to
+ *      find out the device parameters
+ *    - Create an input device and assign it attributes
+ *   - Allocate an URB so the device can talk to us when the input
+ *      queue is open
+ */
+static int gtco_probe(struct usb_interface *usbinterface,
+		      const struct usb_device_id *id)
+{
+
+	struct gtco             *gtco;
+	struct input_dev        *input_dev;
+	struct hid_descriptor   *hid_desc;
+	char                    *report = NULL;
+	int                     result = 0, retry;
+	int			error;
+	struct usb_endpoint_descriptor *endpoint;
+
+	/* Allocate memory for device structure */
+	gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!gtco || !input_dev) {
+		err("No more memory");
+		error = -ENOMEM;
+		goto err_free_devs;
+	}
+
+	/* Set pointer to the input device */
+	gtco->inputdevice = input_dev;
+
+	/* Save interface information */
+	gtco->usbdev = usb_get_dev(interface_to_usbdev(usbinterface));
+
+	/* Allocate some data for incoming reports */
+	gtco->buffer = usb_buffer_alloc(gtco->usbdev, REPORT_MAX_SIZE,
+					GFP_KERNEL, &gtco->buf_dma);
+	if (!gtco->buffer) {
+		err("No more memory for us buffers");
+		error = -ENOMEM;
+		goto err_free_devs;
+	}
+
+	/* Allocate URB for reports */
+	gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL);
+	if (!gtco->urbinfo) {
+		err("Failed to allocate URB");
+		return -ENOMEM;
+		goto err_free_buf;
+	}
+
+	/*
+	 * The endpoint is always altsetting 0, we know this since we know
+	 * this device only has one interrupt endpoint
+	 */
+	endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
+
+	/* Some debug */
+	dbg("gtco # interfaces: %d", usbinterface->num_altsetting);
+	dbg("num endpoints:     %d", usbinterface->cur_altsetting->desc.bNumEndpoints);
+	dbg("interface class:   %d", usbinterface->cur_altsetting->desc.bInterfaceClass);
+	dbg("endpoint: attribute:0x%x type:0x%x", endpoint->bmAttributes, endpoint->bDescriptorType);
+	if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)
+		dbg("endpoint: we have interrupt endpoint\n");
+
+	dbg("endpoint extra len:%d ", usbinterface->altsetting[0].extralen);
+
+	/*
+	 * Find the HID descriptor so we can find out the size of the
+	 * HID report descriptor
+	 */
+	if (usb_get_extra_descriptor(usbinterface->cur_altsetting,
+				     HID_DEVICE_TYPE, &hid_desc) != 0){
+		err("Can't retrieve exta USB descriptor to get hid report descriptor length");
+		error = -EIO;
+		goto err_free_urb;
+	}
+
+	dbg("Extra descriptor success: type:%d  len:%d",
+	    hid_desc->bDescriptorType,  hid_desc->wDescriptorLength);
+
+	report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
+	if (!report) {
+		err("No more memory for report");
+		error = -ENOMEM;
+		goto err_free_urb;
+	}
+
+	/* Couple of tries to get reply */
+	for (retry = 0; retry < 3; retry++) {
+		result = usb_control_msg(gtco->usbdev,
+					 usb_rcvctrlpipe(gtco->usbdev, 0),
+					 USB_REQ_GET_DESCRIPTOR,
+					 USB_RECIP_INTERFACE | USB_DIR_IN,
+					 REPORT_DEVICE_TYPE << 8,
+					 0, /* interface */
+					 report,
+					 hid_desc->wDescriptorLength,
+					 5000); /* 5 secs */
+
+		if (result == hid_desc->wDescriptorLength)
+			break;
+	}
+
+	/* If we didn't get the report, fail */
+	dbg("usb_control_msg result: :%d", result);
+	if (result != hid_desc->wDescriptorLength) {
+		err("Failed to get HID Report Descriptor of size: %d",
+		    hid_desc->wDescriptorLength);
+		error = -EIO;
+		goto err_free_urb;
+	}
+
+	/* Now we parse the report */
+	parse_hid_report_descriptor(gtco, report, result);
+
+	/* Now we delete it */
+	kfree(report);
+
+	/* Create a device file node */
+	usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
+	strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
+
+	/* Set Input device functions */
+	input_dev->open = gtco_input_open;
+	input_dev->close = gtco_input_close;
+
+	/* Set input device information */
+	input_dev->name = "GTCO_CalComp";
+	input_dev->phys = gtco->usbpath;
+
+	input_set_drvdata(input_dev, gtco);
+
+	/* Now set up all the input device capabilities */
+	gtco_setup_caps(input_dev);
+
+	/* Set input device required ID information */
+	usb_to_input_id(gtco->usbdev, &input_dev->id);
+	input_dev->dev.parent = &usbinterface->dev;
+
+	/* Setup the URB, it will be posted later on open of input device */
+	endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
+
+	usb_fill_int_urb(gtco->urbinfo,
+			 gtco->usbdev,
+			 usb_rcvintpipe(gtco->usbdev,
+					endpoint->bEndpointAddress),
+			 gtco->buffer,
+			 REPORT_MAX_SIZE,
+			 gtco_urb_callback,
+			 gtco,
+			 endpoint->bInterval);
+
+	gtco->urbinfo->transfer_dma = gtco->buf_dma;
+	gtco->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* Save gtco pointer in USB interface gtco */
+	usb_set_intfdata(usbinterface, gtco);
+
+	/* All done, now register the input device */
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_free_urb;
+
+	return 0;
+
+ err_free_urb:
+	usb_free_urb(gtco->urbinfo);
+ err_free_buf:
+	usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
+			gtco->buffer, gtco->buf_dma);
+ err_free_devs:
+	kfree(report);
+	input_free_device(input_dev);
+	kfree(gtco);
+	return error;
+}
+
+/*
+ *  This function is a standard USB function called when the USB device
+ *  is disconnected.  We will get rid of the URV, de-register the input
+ *  device, and free up allocated memory
+ */
+static void gtco_disconnect(struct usb_interface *interface)
+{
+	/* Grab private device ptr */
+	struct gtco *gtco = usb_get_intfdata(interface);
+
+	/* Now reverse all the registration stuff */
+	if (gtco) {
+		input_unregister_device(gtco->inputdevice);
+		usb_kill_urb(gtco->urbinfo);
+		usb_free_urb(gtco->urbinfo);
+		usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
+				gtco->buffer, gtco->buf_dma);
+		kfree(gtco);
+	}
+
+	info("gtco driver disconnected");
+}
+
+/*   STANDARD MODULE LOAD ROUTINES  */
+
+static struct usb_driver gtco_driverinfo_table = {
+	.name		= "gtco",
+	.id_table	= gtco_usbid_table,
+	.probe		= gtco_probe,
+	.disconnect	= gtco_disconnect,
+};
+
+/*
+ *  Register this module with the USB subsystem
+ */
+static int __init gtco_init(void)
+{
+	int error;
+
+	error = usb_register(&gtco_driverinfo_table);
+	if (error) {
+		err("usb_register() failed rc=0x%x", error);
+		return error;
+	}
+
+	printk("GTCO usb driver version: %s", GTCO_VERSION);
+	return 0;
+}
+
+/*
+ *   Deregister this module with the USB subsystem
+ */
+static void __exit gtco_exit(void)
+{
+	usb_deregister(&gtco_driverinfo_table);
+}
+
+module_init(gtco_init);
+module_exit(gtco_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/tablet/kbtab.c b/drivers/input/tablet/kbtab.c
new file mode 100644
index 00000000000..91e6d00d4a4
--- /dev/null
+++ b/drivers/input/tablet/kbtab.c
@@ -0,0 +1,226 @@
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb/input.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ * v0.0.1 - Original, extremely basic version, 2.4.xx only
+ * v0.0.2 - Updated, works with 2.5.62 and 2.4.20;
+ *           - added pressure-threshold modules param code from
+ *              Alex Perry <alex.perry@ieee.org>
+ */
+
+#define DRIVER_VERSION "v0.0.2"
+#define DRIVER_AUTHOR "Josh Myer <josh@joshisanerd.com>"
+#define DRIVER_DESC "USB KB Gear JamStudio Tablet driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_KBGEAR	0x084e
+
+static int kb_pressure_click = 0x10;
+module_param(kb_pressure_click, int, 0);
+MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks");
+
+struct kbtab {
+	unsigned char *data;
+	dma_addr_t data_dma;
+	struct input_dev *dev;
+	struct usb_device *usbdev;
+	struct urb *irq;
+	int x, y;
+	int button;
+	int pressure;
+	__u32 serial[2];
+	char phys[32];
+};
+
+static void kbtab_irq(struct urb *urb)
+{
+	struct kbtab *kbtab = urb->context;
+	unsigned char *data = kbtab->data;
+	struct input_dev *dev = kbtab->dev;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	kbtab->x = le16_to_cpu(get_unaligned((__le16 *) &data[1]));
+	kbtab->y = le16_to_cpu(get_unaligned((__le16 *) &data[3]));
+
+	kbtab->pressure = (data[5]);
+
+	input_report_key(dev, BTN_TOOL_PEN, 1);
+
+	input_report_abs(dev, ABS_X, kbtab->x);
+	input_report_abs(dev, ABS_Y, kbtab->y);
+
+	/*input_report_key(dev, BTN_TOUCH , data[0] & 0x01);*/
+	input_report_key(dev, BTN_RIGHT, data[0] & 0x02);
+
+	if (-1 == kb_pressure_click) {
+		input_report_abs(dev, ABS_PRESSURE, kbtab->pressure);
+	} else {
+		input_report_key(dev, BTN_LEFT, (kbtab->pressure > kb_pressure_click) ? 1 : 0);
+	};
+
+	input_sync(dev);
+
+ exit:
+	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	if (retval)
+		err ("%s - usb_submit_urb failed with result %d",
+		     __FUNCTION__, retval);
+}
+
+static struct usb_device_id kbtab_ids[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_KBGEAR, 0x1001), .driver_info = 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(usb, kbtab_ids);
+
+static int kbtab_open(struct input_dev *dev)
+{
+	struct kbtab *kbtab = input_get_drvdata(dev);
+
+	kbtab->irq->dev = kbtab->usbdev;
+	if (usb_submit_urb(kbtab->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void kbtab_close(struct input_dev *dev)
+{
+	struct kbtab *kbtab = input_get_drvdata(dev);
+
+	usb_kill_urb(kbtab->irq);
+}
+
+static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct kbtab *kbtab;
+	struct input_dev *input_dev;
+	int error = -ENOMEM;
+
+	kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!kbtab || !input_dev)
+		goto fail1;
+
+	kbtab->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &kbtab->data_dma);
+	if (!kbtab->data)
+		goto fail1;
+
+	kbtab->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!kbtab->irq)
+		goto fail2;
+
+	kbtab->usbdev = dev;
+	kbtab->dev = input_dev;
+
+	usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys));
+	strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys));
+
+	input_dev->name = "KB Gear Tablet";
+	input_dev->phys = kbtab->phys;
+	usb_to_input_id(dev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, kbtab);
+
+	input_dev->open = kbtab_open;
+	input_dev->close = kbtab_close;
+
+	input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC);
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH);
+	input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+	input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
+
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+	usb_fill_int_urb(kbtab->irq, dev,
+			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+			 kbtab->data, 8,
+			 kbtab_irq, kbtab, endpoint->bInterval);
+	kbtab->irq->transfer_dma = kbtab->data_dma;
+	kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	error = input_register_device(kbtab->dev);
+	if (error)
+		goto fail3;
+
+	usb_set_intfdata(intf, kbtab);
+
+	return 0;
+
+ fail3:	usb_free_urb(kbtab->irq);
+ fail2:	usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma);
+ fail1:	input_free_device(input_dev);
+	kfree(kbtab);
+	return error;
+}
+
+static void kbtab_disconnect(struct usb_interface *intf)
+{
+	struct kbtab *kbtab = usb_get_intfdata(intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (kbtab) {
+		usb_kill_urb(kbtab->irq);
+		input_unregister_device(kbtab->dev);
+		usb_free_urb(kbtab->irq);
+		usb_buffer_free(interface_to_usbdev(intf), 10, kbtab->data, kbtab->data_dma);
+		kfree(kbtab);
+	}
+}
+
+static struct usb_driver kbtab_driver = {
+	.name =		"kbtab",
+	.probe =	kbtab_probe,
+	.disconnect =	kbtab_disconnect,
+	.id_table =	kbtab_ids,
+};
+
+static int __init kbtab_init(void)
+{
+	int retval;
+	retval = usb_register(&kbtab_driver);
+	if (retval)
+		goto out;
+	info(DRIVER_VERSION ":" DRIVER_DESC);
+out:
+	return retval;
+}
+
+static void __exit kbtab_exit(void)
+{
+	usb_deregister(&kbtab_driver);
+}
+
+module_init(kbtab_init);
+module_exit(kbtab_exit);
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
new file mode 100644
index 00000000000..ef01a807ec0
--- /dev/null
+++ b/drivers/input/tablet/wacom.h
@@ -0,0 +1,131 @@
+/*
+ * drivers/input/tablet/wacom.h
+ *
+ *  USB Wacom Graphire and Wacom Intuos tablet support
+ *
+ *  Copyright (c) 2000-2004 Vojtech Pavlik	<vojtech@ucw.cz>
+ *  Copyright (c) 2000 Andreas Bach Aaen	<abach@stofanet.dk>
+ *  Copyright (c) 2000 Clifford Wolf		<clifford@clifford.at>
+ *  Copyright (c) 2000 Sam Mosel		<sam.mosel@computer.org>
+ *  Copyright (c) 2000 James E. Blair		<corvus@gnu.org>
+ *  Copyright (c) 2000 Daniel Egger		<egger@suse.de>
+ *  Copyright (c) 2001 Frederic Lepied		<flepied@mandrakesoft.com>
+ *  Copyright (c) 2004 Panagiotis Issaris	<panagiotis.issaris@mech.kuleuven.ac.be>
+ *  Copyright (c) 2002-2006 Ping Cheng		<pingc@wacom.com>
+ *
+ *  ChangeLog:
+ *      v0.1 (vp)  - Initial release
+ *      v0.2 (aba) - Support for all buttons / combinations
+ *      v0.3 (vp)  - Support for Intuos added
+ *	v0.4 (sm)  - Support for more Intuos models, menustrip
+ *			relative mode, proximity.
+ *	v0.5 (vp)  - Big cleanup, nifty features removed,
+ *			they belong in userspace
+ *	v1.8 (vp)  - Submit URB only when operating, moved to CVS,
+ *			use input_report_key instead of report_btn and
+ *			other cleanups
+ *	v1.11 (vp) - Add URB ->dev setting for new kernels
+ *	v1.11 (jb) - Add support for the 4D Mouse & Lens
+ *	v1.12 (de) - Add support for two more inking pen IDs
+ *	v1.14 (vp) - Use new USB device id probing scheme.
+ *		     Fix Wacom Graphire mouse wheel
+ *	v1.18 (vp) - Fix mouse wheel direction
+ *		     Make mouse relative
+ *      v1.20 (fl) - Report tool id for Intuos devices
+ *                 - Multi tools support
+ *                 - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...)
+ *                 - Add PL models support
+ *		   - Fix Wacom Graphire mouse wheel again
+ *	v1.21 (vp) - Removed protocol descriptions
+ *		   - Added MISC_SERIAL for tool serial numbers
+ *	      (gb) - Identify version on module load.
+ *    v1.21.1 (fl) - added Graphire2 support
+ *    v1.21.2 (fl) - added Intuos2 support
+ *                 - added all the PL ids
+ *    v1.21.3 (fl) - added another eraser id from Neil Okamoto
+ *                 - added smooth filter for Graphire from Peri Hankey
+ *                 - added PenPartner support from Olaf van Es
+ *                 - new tool ids from Ole Martin Bjoerndalen
+ *	v1.29 (pc) - Add support for more tablets
+ *		   - Fix pressure reporting
+ *	v1.30 (vp) - Merge 2.4 and 2.5 drivers
+ *		   - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse
+ *		   - Cleanups here and there
+ *    v1.30.1 (pi) - Added Graphire3 support
+ *	v1.40 (pc) - Add support for several new devices, fix eraser reporting, ...
+ *	v1.43 (pc) - Added support for Cintiq 21UX
+ *		   - Fixed a Graphire bug
+ *		   - Merged wacom_intuos3_irq into wacom_intuos_irq
+ *	v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc.
+ *		   - Report Device IDs
+ *      v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19
+ *                 - Minor data report fix
+ *      v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c,
+ *		   - where wacom_sys.c deals with system specific code,
+ * 		   - and wacom_wac.c deals with Wacom specific code
+ *		   - Support Intuos3 4x6
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef WACOM_H
+#define WACOM_H
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb/input.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v1.46"
+#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
+#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_WACOM	0x056a
+
+struct wacom {
+	dma_addr_t data_dma;
+	struct input_dev *dev;
+	struct usb_device *usbdev;
+	struct urb *irq;
+	struct wacom_wac * wacom_wac;
+	char phys[32];
+};
+
+struct wacom_combo {
+	struct wacom * wacom;
+	struct urb * urb;
+};
+
+extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
+extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data);
+extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data);
+extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data);
+extern void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value);
+extern void wacom_input_sync(void *wcombo);
+extern void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
+extern __u16 wacom_le16_to_cpu(unsigned char *data);
+extern __u16 wacom_be16_to_cpu(unsigned char *data);
+extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
+extern const struct usb_device_id * get_device_table(void);
+
+#endif
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
new file mode 100644
index 00000000000..83bddef6606
--- /dev/null
+++ b/drivers/input/tablet/wacom_sys.c
@@ -0,0 +1,318 @@
+/*
+ * drivers/input/tablet/wacom_sys.c
+ *
+ *  USB Wacom Graphire and Wacom Intuos tablet support - system specific code
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "wacom.h"
+#include "wacom_wac.h"
+
+#define USB_REQ_GET_REPORT	0x01
+#define USB_REQ_SET_REPORT	0x09
+
+static int usb_get_report(struct usb_interface *intf, unsigned char type,
+				unsigned char id, void *buf, int size)
+{
+	return usb_control_msg(interface_to_usbdev(intf),
+		usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
+		USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+		(type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
+		buf, size, 100);
+}
+
+static int usb_set_report(struct usb_interface *intf, unsigned char type,
+				unsigned char id, void *buf, int size)
+{
+	return usb_control_msg(interface_to_usbdev(intf),
+		usb_sndctrlpipe(interface_to_usbdev(intf), 0),
+                USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+                (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
+		buf, size, 1000);
+}
+
+static struct input_dev * get_input_dev(struct wacom_combo *wcombo)
+{
+	return wcombo->wacom->dev;
+}
+
+static void wacom_sys_irq(struct urb *urb)
+{
+	struct wacom *wacom = urb->context;
+	struct wacom_combo wcombo;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+		/* this urb is terminated, clean up */
+		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+		return;
+	default:
+		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+		goto exit;
+	}
+
+	wcombo.wacom = wacom;
+	wcombo.urb = urb;
+
+	if (wacom_wac_irq(wacom->wacom_wac, (void *)&wcombo))
+		input_sync(get_input_dev(&wcombo));
+
+ exit:
+	retval = usb_submit_urb (urb, GFP_ATOMIC);
+	if (retval)
+		err ("%s - usb_submit_urb failed with result %d",
+		     __FUNCTION__, retval);
+}
+
+void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
+{
+	input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
+	return;
+}
+
+void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
+{
+	input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
+	return;
+}
+
+void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
+{
+	input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
+	return;
+}
+
+void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
+{
+	input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
+	return;
+}
+
+__u16 wacom_be16_to_cpu(unsigned char *data)
+{
+	__u16 value;
+	value = be16_to_cpu(*(__be16 *) data);
+	return value;
+}
+
+__u16 wacom_le16_to_cpu(unsigned char *data)
+{
+	__u16 value;
+	value = le16_to_cpu(*(__le16 *) data);
+	return value;
+}
+
+void wacom_input_sync(void *wcombo)
+{
+	input_sync(get_input_dev((struct wacom_combo *)wcombo));
+	return;
+}
+
+static int wacom_open(struct input_dev *dev)
+{
+	struct wacom *wacom = input_get_drvdata(dev);
+
+	wacom->irq->dev = wacom->usbdev;
+	if (usb_submit_urb(wacom->irq, GFP_KERNEL))
+		return -EIO;
+
+	return 0;
+}
+
+static void wacom_close(struct input_dev *dev)
+{
+	struct wacom *wacom = input_get_drvdata(dev);
+
+	usb_kill_urb(wacom->irq);
+}
+
+void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->evbit[0] |= BIT(EV_MSC);
+	input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_4);
+}
+
+void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->evbit[0] |= BIT(EV_REL);
+	input_dev->relbit[0] |= BIT(REL_WHEEL);
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
+	input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
+}
+
+void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3);
+	input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
+}
+
+void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
+	input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
+}
+
+void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
+	input_dev->mscbit[0] |= BIT(MSC_SERIAL);
+	input_dev->relbit[0] |= BIT(REL_WHEEL);
+	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE)	| BIT(BTN_TOOL_BRUSH)
+		| BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2);
+	input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
+	input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
+	input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
+	input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
+	input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
+}
+
+void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
+}
+
+void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER);
+}
+
+static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(intf);
+	struct usb_endpoint_descriptor *endpoint;
+	struct wacom *wacom;
+	struct wacom_wac *wacom_wac;
+	struct input_dev *input_dev;
+	int error = -ENOMEM;
+	char rep_data[2], limit = 0;
+
+	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
+	wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!wacom || !input_dev || !wacom_wac)
+		goto fail1;
+
+	wacom_wac->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma);
+	if (!wacom_wac->data)
+		goto fail1;
+
+	wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!wacom->irq)
+		goto fail2;
+
+	wacom->usbdev = dev;
+	wacom->dev = input_dev;
+	usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
+	strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
+
+	wacom_wac->features = get_wacom_feature(id);
+	BUG_ON(wacom_wac->features->pktlen > 10);
+
+	input_dev->name = wacom_wac->features->name;
+	wacom->wacom_wac = wacom_wac;
+	usb_to_input_id(dev, &input_dev->id);
+
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, wacom);
+
+	input_dev->open = wacom_open;
+	input_dev->close = wacom_close;
+
+	input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
+	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
+	input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
+	input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC);
+
+	wacom_init_input_dev(input_dev, wacom_wac);
+
+	endpoint = &intf->cur_altsetting->endpoint[0].desc;
+
+	usb_fill_int_urb(wacom->irq, dev,
+			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+			 wacom_wac->data, wacom_wac->features->pktlen,
+			 wacom_sys_irq, wacom, endpoint->bInterval);
+	wacom->irq->transfer_dma = wacom->data_dma;
+	wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	error = input_register_device(wacom->dev);
+	if (error)
+		goto fail3;
+
+	/* Ask the tablet to report tablet data. Repeat until it succeeds */
+	do {
+		rep_data[0] = 2;
+		rep_data[1] = 2;
+		usb_set_report(intf, 3, 2, rep_data, 2);
+		usb_get_report(intf, 3, 2, rep_data, 2);
+	} while (rep_data[1] != 2 && limit++ < 5);
+
+	usb_set_intfdata(intf, wacom);
+	return 0;
+
+ fail3:	usb_free_urb(wacom->irq);
+ fail2:	usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma);
+ fail1:	input_free_device(input_dev);
+	kfree(wacom);
+	kfree(wacom_wac);
+	return error;
+}
+
+static void wacom_disconnect(struct usb_interface *intf)
+{
+	struct wacom *wacom = usb_get_intfdata (intf);
+
+	usb_set_intfdata(intf, NULL);
+	if (wacom) {
+		usb_kill_urb(wacom->irq);
+		input_unregister_device(wacom->dev);
+		usb_free_urb(wacom->irq);
+		usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
+		kfree(wacom->wacom_wac);
+		kfree(wacom);
+	}
+}
+
+static struct usb_driver wacom_driver = {
+	.name =		"wacom",
+	.probe =	wacom_probe,
+	.disconnect =	wacom_disconnect,
+};
+
+static int __init wacom_init(void)
+{
+	int result;
+	wacom_driver.id_table = get_device_table();
+	result = usb_register(&wacom_driver);
+	if (result == 0)
+		info(DRIVER_VERSION ":" DRIVER_DESC);
+	return result;
+}
+
+static void __exit wacom_exit(void)
+{
+	usb_deregister(&wacom_driver);
+}
+
+module_init(wacom_init);
+module_exit(wacom_exit);
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
new file mode 100644
index 00000000000..7661f03a2db
--- /dev/null
+++ b/drivers/input/tablet/wacom_wac.c
@@ -0,0 +1,675 @@
+/*
+ * drivers/input/tablet/wacom_wac.c
+ *
+ *  USB Wacom Graphire and Wacom Intuos tablet support - Wacom specific code
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include "wacom.h"
+#include "wacom_wac.h"
+
+static int wacom_penpartner_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+
+	switch (data[0]) {
+		case 1:
+			if (data[5] & 0x80) {
+				wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+				wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
+				wacom_report_key(wcombo, wacom->tool[0], 1);
+				wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
+				wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+				wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+				wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
+				wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -127));
+				wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
+			} else {
+				wacom_report_key(wcombo, wacom->tool[0], 0);
+				wacom_report_abs(wcombo, ABS_MISC, 0); /* report tool id */
+				wacom_report_abs(wcombo, ABS_PRESSURE, -1);
+				wacom_report_key(wcombo, BTN_TOUCH, 0);
+			}
+			break;
+		case 2:
+			wacom_report_key(wcombo, BTN_TOOL_PEN, 1);
+			wacom_report_abs(wcombo, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
+			wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
+			wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
+			wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
+			wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
+			wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
+			break;
+		default:
+			printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
+			return 0;
+        }
+	return 1;
+}
+
+static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	int prox, id, pressure;
+
+	if (data[0] != 2) {
+		dbg("wacom_pl_irq: received unknown report #%d", data[0]);
+		return 0;
+	}
+
+	prox = data[1] & 0x40;
+
+	id = ERASER_DEVICE_ID;
+	if (prox) {
+
+		pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
+		if (wacom->features->pressure_max > 255)
+			pressure = (pressure << 1) | ((data[4] >> 6) & 1);
+		pressure += (wacom->features->pressure_max + 1) / 2;
+
+		/*
+		 * if going from out of proximity into proximity select between the eraser
+		 * and the pen based on the state of the stylus2 button, choose eraser if
+		 * pressed else choose pen. if not a proximity change from out to in, send
+		 * an out of proximity for previous tool then a in for new tool.
+		 */
+		if (!wacom->tool[0]) {
+			/* Eraser bit set for DTF */
+			if (data[1] & 0x10)
+				wacom->tool[1] = BTN_TOOL_RUBBER;
+			else
+				/* Going into proximity select tool */
+				wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+		} else {
+			/* was entered with stylus2 pressed */
+			if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
+				/* report out proximity for previous tool */
+				wacom_report_key(wcombo, wacom->tool[1], 0);
+				wacom_input_sync(wcombo);
+				wacom->tool[1] = BTN_TOOL_PEN;
+				return 0;
+			}
+		}
+		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+			/* Unknown tool selected default to pen tool */
+			wacom->tool[1] = BTN_TOOL_PEN;
+			id = STYLUS_DEVICE_ID;
+		}
+		wacom_report_key(wcombo, wacom->tool[1], prox); /* report in proximity for tool */
+		wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+		wacom_report_abs(wcombo, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
+		wacom_report_abs(wcombo, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
+		wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
+
+		wacom_report_key(wcombo, BTN_TOUCH, data[4] & 0x08);
+		wacom_report_key(wcombo, BTN_STYLUS, data[4] & 0x10);
+		/* Only allow the stylus2 button to be reported for the pen tool. */
+		wacom_report_key(wcombo, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
+	} else {
+		/* report proximity-out of a (valid) tool */
+		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
+			/* Unknown tool selected default to pen tool */
+			wacom->tool[1] = BTN_TOOL_PEN;
+		}
+		wacom_report_key(wcombo, wacom->tool[1], prox);
+	}
+
+	wacom->tool[0] = prox; /* Save proximity state */
+	return 1;
+}
+
+static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	int id;
+
+	if (data[0] != 2) {
+		printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
+		return 0;
+	}
+
+	if (data[1] & 0x04) {
+		wacom_report_key(wcombo, BTN_TOOL_RUBBER, data[1] & 0x20);
+		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x08);
+		id = ERASER_DEVICE_ID;
+	} else {
+		wacom_report_key(wcombo, BTN_TOOL_PEN, data[1] & 0x20);
+		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
+		id = STYLUS_DEVICE_ID;
+	}
+	wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+	wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
+	wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
+	wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
+	wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+	wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
+	return 1;
+}
+
+static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	int x, y, id, rw;
+
+	if (data[0] != 2) {
+		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
+		return 0;
+	}
+
+	id = STYLUS_DEVICE_ID;
+	if (data[1] & 0x80) { /* in prox */
+
+		switch ((data[1] >> 5) & 3) {
+
+			case 0:	/* Pen */
+				wacom->tool[0] = BTN_TOOL_PEN;
+				break;
+
+			case 1: /* Rubber */
+				wacom->tool[0] = BTN_TOOL_RUBBER;
+				id = ERASER_DEVICE_ID;
+				break;
+
+			case 2: /* Mouse with wheel */
+				wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
+				if (wacom->features->type == WACOM_G4) {
+					rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
+					wacom_report_rel(wcombo, REL_WHEEL, -rw);
+				} else
+					wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]);
+				/* fall through */
+
+			case 3: /* Mouse without wheel */
+				wacom->tool[0] = BTN_TOOL_MOUSE;
+				id = CURSOR_DEVICE_ID;
+				wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
+				wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
+				if (wacom->features->type == WACOM_G4)
+					wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
+				else
+					wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
+				break;
+		}
+		x = wacom_le16_to_cpu(&data[2]);
+		y = wacom_le16_to_cpu(&data[4]);
+		wacom_report_abs(wcombo, ABS_X, x);
+		wacom_report_abs(wcombo, ABS_Y, y);
+		if (wacom->tool[0] != BTN_TOOL_MOUSE) {
+			wacom_report_abs(wcombo, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
+			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
+			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
+			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
+		}
+		wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
+		wacom_report_key(wcombo, wacom->tool[0], 1);
+	} else if (!(data[1] & 0x90)) {
+		wacom_report_abs(wcombo, ABS_X, 0);
+		wacom_report_abs(wcombo, ABS_Y, 0);
+		if (wacom->tool[0] == BTN_TOOL_MOUSE) {
+			wacom_report_key(wcombo, BTN_LEFT, 0);
+			wacom_report_key(wcombo, BTN_RIGHT, 0);
+			wacom_report_abs(wcombo, ABS_DISTANCE, 0);
+		} else {
+			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+			wacom_report_key(wcombo, BTN_TOUCH, 0);
+			wacom_report_key(wcombo, BTN_STYLUS, 0);
+			wacom_report_key(wcombo, BTN_STYLUS2, 0);
+		}
+		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
+		wacom_report_key(wcombo, wacom->tool[0], 0);
+	}
+
+	/* send pad data */
+	if (wacom->features->type == WACOM_G4) {
+		if (data[7] & 0xf8) {
+			wacom_input_sync(wcombo); /* sync last event */
+			wacom->id[1] = 1;
+			wacom->serial[1] = (data[7] & 0xf8);
+			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
+			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
+			rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
+			wacom_report_rel(wcombo, REL_WHEEL, rw);
+			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
+			wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+		} else if (wacom->id[1]) {
+			wacom_input_sync(wcombo); /* sync last event */
+			wacom->id[1] = 0;
+			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
+			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
+			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
+			wacom_report_abs(wcombo, ABS_MISC, 0);
+			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
+		}
+	}
+	return 1;
+}
+
+static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	int idx;
+
+	/* tool number */
+	idx = data[1] & 0x01;
+
+	/* Enter report */
+	if ((data[1] & 0xfc) == 0xc0) {
+		/* serial number of the tool */
+		wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
+			(data[4] << 20) + (data[5] << 12) +
+			(data[6] << 4) + (data[7] >> 4);
+
+		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
+		switch (wacom->id[idx]) {
+			case 0x812: /* Inking pen */
+			case 0x801: /* Intuos3 Inking pen */
+			case 0x012:
+				wacom->tool[idx] = BTN_TOOL_PENCIL;
+				break;
+			case 0x822: /* Pen */
+			case 0x842:
+			case 0x852:
+			case 0x823: /* Intuos3 Grip Pen */
+			case 0x813: /* Intuos3 Classic Pen */
+			case 0x885: /* Intuos3 Marker Pen */
+			case 0x022:
+				wacom->tool[idx] = BTN_TOOL_PEN;
+				break;
+			case 0x832: /* Stroke pen */
+			case 0x032:
+				wacom->tool[idx] = BTN_TOOL_BRUSH;
+				break;
+			case 0x007: /* Mouse 4D and 2D */
+		        case 0x09c:
+			case 0x094:
+			case 0x017: /* Intuos3 2D Mouse */
+				wacom->tool[idx] = BTN_TOOL_MOUSE;
+				break;
+			case 0x096: /* Lens cursor */
+			case 0x097: /* Intuos3 Lens cursor */
+				wacom->tool[idx] = BTN_TOOL_LENS;
+				break;
+			case 0x82a: /* Eraser */
+			case 0x85a:
+		        case 0x91a:
+			case 0xd1a:
+			case 0x0fa:
+			case 0x82b: /* Intuos3 Grip Pen Eraser */
+			case 0x81b: /* Intuos3 Classic Pen Eraser */
+			case 0x91b: /* Intuos3 Airbrush Eraser */
+				wacom->tool[idx] = BTN_TOOL_RUBBER;
+				break;
+			case 0xd12:
+			case 0x912:
+			case 0x112:
+			case 0x913: /* Intuos3 Airbrush */
+				wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
+				break;
+			default: /* Unknown tool */
+				wacom->tool[idx] = BTN_TOOL_PEN;
+		}
+		return 1;
+	}
+
+	/* Exit report */
+	if ((data[1] & 0xfe) == 0x80) {
+		wacom_report_abs(wcombo, ABS_X, 0);
+		wacom_report_abs(wcombo, ABS_Y, 0);
+		wacom_report_abs(wcombo, ABS_DISTANCE, 0);
+		if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
+			wacom_report_key(wcombo, BTN_LEFT, 0);
+			wacom_report_key(wcombo, BTN_MIDDLE, 0);
+			wacom_report_key(wcombo, BTN_RIGHT, 0);
+			wacom_report_key(wcombo, BTN_SIDE, 0);
+			wacom_report_key(wcombo, BTN_EXTRA, 0);
+			wacom_report_abs(wcombo, ABS_THROTTLE, 0);
+			wacom_report_abs(wcombo, ABS_RZ, 0);
+ 		} else {
+			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
+			wacom_report_abs(wcombo, ABS_TILT_X, 0);
+			wacom_report_abs(wcombo, ABS_TILT_Y, 0);
+			wacom_report_key(wcombo, BTN_STYLUS, 0);
+			wacom_report_key(wcombo, BTN_STYLUS2, 0);
+			wacom_report_key(wcombo, BTN_TOUCH, 0);
+			wacom_report_abs(wcombo, ABS_WHEEL, 0);
+		}
+		wacom_report_key(wcombo, wacom->tool[idx], 0);
+		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
+		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+		return 2;
+	}
+	return 0;
+}
+
+static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	unsigned int t;
+
+	/* general pen packet */
+	if ((data[1] & 0xb8) == 0xa0) {
+		t = (data[6] << 2) | ((data[7] >> 6) & 3);
+		wacom_report_abs(wcombo, ABS_PRESSURE, t);
+		wacom_report_abs(wcombo, ABS_TILT_X,
+				((data[7] << 1) & 0x7e) | (data[8] >> 7));
+		wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
+		wacom_report_key(wcombo, BTN_STYLUS, data[1] & 2);
+		wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 4);
+		wacom_report_key(wcombo, BTN_TOUCH, t > 10);
+	}
+
+	/* airbrush second packet */
+	if ((data[1] & 0xbc) == 0xb4) {
+		wacom_report_abs(wcombo, ABS_WHEEL,
+				(data[6] << 2) | ((data[7] >> 6) & 3));
+		wacom_report_abs(wcombo, ABS_TILT_X,
+				((data[7] << 1) & 0x7e) | (data[8] >> 7));
+		wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
+	}
+	return;
+}
+
+static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
+{
+	unsigned char *data = wacom->data;
+	unsigned int t;
+	int idx, result;
+
+	if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) {
+		dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
+                return 0;
+	}
+
+	/* tool number */
+	idx = data[1] & 0x01;
+
+	/* pad packets. Works as a second tool and is always in prox */
+	if (data[0] == 12) {
+		/* initiate the pad as a device */
+		if (wacom->tool[1] != BTN_TOOL_FINGER)
+			wacom->tool[1] = BTN_TOOL_FINGER;
+
+		wacom_report_key(wcombo, BTN_0, (data[5] & 0x01));
+		wacom_report_key(wcombo, BTN_1, (data[5] & 0x02));
+		wacom_report_key(wcombo, BTN_2, (data[5] & 0x04));
+		wacom_report_key(wcombo, BTN_3, (data[5] & 0x08));
+		wacom_report_key(wcombo, BTN_4, (data[6] & 0x01));
+		wacom_report_key(wcombo, BTN_5, (data[6] & 0x02));
+		wacom_report_key(wcombo, BTN_6, (data[6] & 0x04));
+		wacom_report_key(wcombo, BTN_7, (data[6] & 0x08));
+		wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
+		wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
+
+		if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) |
+			data[2] | (data[3] & 0x1f) | data[4])
+			wacom_report_key(wcombo, wacom->tool[1], 1);
+		else
+			wacom_report_key(wcombo, wacom->tool[1], 0);
+		wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
+		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff);
+                return 1;
+	}
+
+	/* process in/out prox events */
+	result = wacom_intuos_inout(wacom, wcombo);
+	if (result)
+                return result-1;
+
+	/* Only large I3 and I1 & I2 support Lense Cursor */
+ 	if((wacom->tool[idx] == BTN_TOOL_LENS)
+			&& ((wacom->features->type == INTUOS3)
+		 	|| (wacom->features->type == INTUOS3S)))
+		return 0;
+
+	/* Cintiq doesn't send data when RDY bit isn't set */
+	if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
+                 return 0;
+
+	if (wacom->features->type >= INTUOS3S) {
+		wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
+		wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
+		wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
+	} else {
+		wacom_report_abs(wcombo, ABS_X, wacom_be16_to_cpu(&data[2]));
+		wacom_report_abs(wcombo, ABS_Y, wacom_be16_to_cpu(&data[4]));
+		wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
+	}
+
+	/* process general packets */
+	wacom_intuos_general(wacom, wcombo);
+
+	/* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */
+	if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) {
+
+		if (data[1] & 0x02) {
+			/* Rotation packet */
+			if (wacom->features->type >= INTUOS3S) {
+				/* I3 marker pen rotation reported as wheel
+				 * due to valuator limitation
+				 */
+				t = (data[6] << 3) | ((data[7] >> 5) & 7);
+				t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
+					((t-1) / 2 + 450)) : (450 - t / 2) ;
+				wacom_report_abs(wcombo, ABS_WHEEL, t);
+			} else {
+				/* 4D mouse rotation packet */
+				t = (data[6] << 3) | ((data[7] >> 5) & 7);
+				wacom_report_abs(wcombo, ABS_RZ, (data[7] & 0x20) ?
+					((t - 1) / 2) : -t / 2);
+			}
+
+		} else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3S) {
+			/* 4D mouse packet */
+			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x01);
+			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
+			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x04);
+
+			wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x20);
+			wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x10);
+			t = (data[6] << 2) | ((data[7] >> 6) & 3);
+			wacom_report_abs(wcombo, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
+
+		} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
+			/* 2D mouse packet */
+			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x04);
+			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x08);
+			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x10);
+			wacom_report_rel(wcombo, REL_WHEEL, (data[8] & 0x01)
+						 - ((data[8] & 0x02) >> 1));
+
+			/* I3 2D mouse side buttons */
+			if (wacom->features->type >= INTUOS3S && wacom->features->type <= INTUOS3L) {
+				wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x40);
+				wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x20);
+			}
+
+		} else if (wacom->features->type < INTUOS3S || wacom->features->type == INTUOS3L) {
+			/* Lens cursor packets */
+			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x01);
+			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
+			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x04);
+			wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x10);
+			wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x08);
+		}
+	}
+
+	wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */
+	wacom_report_key(wcombo, wacom->tool[idx], 1);
+	wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
+	return 1;
+}
+
+int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
+{
+	switch (wacom_wac->features->type) {
+		case PENPARTNER:
+			return (wacom_penpartner_irq(wacom_wac, wcombo));
+			break;
+		case PL:
+			return (wacom_pl_irq(wacom_wac, wcombo));
+			break;
+		case WACOM_G4:
+		case GRAPHIRE:
+			return (wacom_graphire_irq(wacom_wac, wcombo));
+			break;
+		case PTU:
+			return (wacom_ptu_irq(wacom_wac, wcombo));
+			break;
+		case INTUOS:
+		case INTUOS3S:
+		case INTUOS3:
+		case INTUOS3L:
+		case CINTIQ:
+			return (wacom_intuos_irq(wacom_wac, wcombo));
+			break;
+		default:
+			return 0;
+	}
+	return 0;
+}
+
+void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
+{
+	switch (wacom_wac->features->type) {
+		case WACOM_G4:
+			input_dev_g4(input_dev, wacom_wac);
+			/* fall through */
+		case GRAPHIRE:
+			input_dev_g(input_dev, wacom_wac);
+			break;
+		case INTUOS3:
+		case INTUOS3L:
+		case CINTIQ:
+			input_dev_i3(input_dev, wacom_wac);
+			/* fall through */
+		case INTUOS3S:
+			input_dev_i3s(input_dev, wacom_wac);
+		case INTUOS:
+			input_dev_i(input_dev, wacom_wac);
+			break;
+		case PL:
+		case PTU:
+			input_dev_pl(input_dev, wacom_wac);
+			break;
+		case PENPARTNER:
+			input_dev_pt(input_dev, wacom_wac);
+			break;
+	}
+	return;
+}
+
+static struct wacom_features wacom_features[] = {
+	{ "Wacom Penpartner",    7,   5040,  3780,  255,  0, PENPARTNER },
+        { "Wacom Graphire",      8,  10206,  7422,  511, 63, GRAPHIRE },
+	{ "Wacom Graphire2 4x5", 8,  10206,  7422,  511, 63, GRAPHIRE },
+	{ "Wacom Graphire2 5x7", 8,  13918, 10206,  511, 63, GRAPHIRE },
+	{ "Wacom Graphire3",     8,  10208,  7424,  511, 63, GRAPHIRE },
+	{ "Wacom Graphire3 6x8", 8,  16704, 12064,  511, 63, GRAPHIRE },
+	{ "Wacom Graphire4 4x5", 8,  10208,  7424,  511, 63, WACOM_G4 },
+	{ "Wacom Graphire4 6x8", 8,  16704, 12064,  511, 63, WACOM_G4 },
+	{ "Wacom Volito",        8,   5104,  3712,  511, 63, GRAPHIRE },
+	{ "Wacom PenStation2",   8,   3250,  2320,  255, 63, GRAPHIRE },
+	{ "Wacom Volito2 4x5",   8,   5104,  3712,  511, 63, GRAPHIRE },
+	{ "Wacom Volito2 2x3",   8,   3248,  2320,  511, 63, GRAPHIRE },
+	{ "Wacom PenPartner2",   8,   3250,  2320,  255, 63, GRAPHIRE },
+	{ "Wacom Intuos 4x5",   10,  12700, 10600, 1023, 31, INTUOS },
+	{ "Wacom Intuos 6x8",   10,  20320, 16240, 1023, 31, INTUOS },
+	{ "Wacom Intuos 9x12",  10,  30480, 24060, 1023, 31, INTUOS },
+	{ "Wacom Intuos 12x12", 10,  30480, 31680, 1023, 31, INTUOS },
+	{ "Wacom Intuos 12x18", 10,  45720, 31680, 1023, 31, INTUOS },
+	{ "Wacom PL400",         8,   5408,  4056,  255,  0, PL },
+	{ "Wacom PL500",         8,   6144,  4608,  255,  0, PL },
+	{ "Wacom PL600",         8,   6126,  4604,  255,  0, PL },
+	{ "Wacom PL600SX",       8,   6260,  5016,  255,  0, PL },
+	{ "Wacom PL550",         8,   6144,  4608,  511,  0, PL },
+	{ "Wacom PL800",         8,   7220,  5780,  511,  0, PL },
+	{ "Wacom PL700",         8,   6758,  5406,  511,  0, PL },
+	{ "Wacom PL510",         8,   6282,  4762,  511,  0, PL },
+	{ "Wacom DTU710",        8,  34080, 27660,  511,  0, PL },
+	{ "Wacom DTF521",        8,   6282,  4762,  511,  0, PL },
+	{ "Wacom DTF720",        8,   6858,  5506,  511,  0, PL },
+	{ "Wacom Cintiq Partner",8,  20480, 15360,  511,  0, PTU },
+	{ "Wacom Intuos2 4x5",   10, 12700, 10600, 1023, 31, INTUOS },
+	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
+	{ "Wacom Intuos2 9x12",  10, 30480, 24060, 1023, 31, INTUOS },
+	{ "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 31, INTUOS },
+	{ "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 31, INTUOS },
+	{ "Wacom Intuos3 4x5",   10, 25400, 20320, 1023, 63, INTUOS3S },
+	{ "Wacom Intuos3 6x8",   10, 40640, 30480, 1023, 63, INTUOS3 },
+	{ "Wacom Intuos3 9x12",  10, 60960, 45720, 1023, 63, INTUOS3 },
+	{ "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 63, INTUOS3L },
+	{ "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 63, INTUOS3L },
+	{ "Wacom Intuos3 6x11",  10, 54204, 31750, 1023, 63, INTUOS3 },
+	{ "Wacom Intuos3 4x6",   10, 31496, 19685, 1023, 63, INTUOS3S },
+	{ "Wacom Cintiq 21UX",   10, 87200, 65600, 1023, 63, CINTIQ },
+	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
+	{ }
+};
+
+static struct usb_device_id wacom_ids[] = {
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB7) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
+	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
+	{ }
+};
+
+const struct usb_device_id * get_device_table(void) {
+        const struct usb_device_id * id_table = wacom_ids;
+        return id_table;
+}
+
+struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
+        int index = id - wacom_ids;
+        struct wacom_features *wf = &wacom_features[index];
+        return wf;
+}
+
+MODULE_DEVICE_TABLE(usb, wacom_ids);
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
new file mode 100644
index 00000000000..a5e12e8756d
--- /dev/null
+++ b/drivers/input/tablet/wacom_wac.h
@@ -0,0 +1,49 @@
+/*
+ * drivers/input/tablet/wacom_wac.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef WACOM_WAC_H
+#define WACOM_WAC_H
+
+#define STYLUS_DEVICE_ID	0x02
+#define CURSOR_DEVICE_ID	0x06
+#define ERASER_DEVICE_ID	0x0A
+#define PAD_DEVICE_ID		0x0F
+
+enum {
+	PENPARTNER = 0,
+	GRAPHIRE,
+	WACOM_G4,
+	PTU,
+	PL,
+	INTUOS,
+	INTUOS3S,
+	INTUOS3,
+	INTUOS3L,
+	CINTIQ,
+	MAX_TYPE
+};
+
+struct wacom_features {
+	char *name;
+	int pktlen;
+	int x_max;
+	int y_max;
+	int pressure_max;
+	int distance_max;
+	int type;
+};
+
+struct wacom_wac {
+	unsigned char *data;
+        int tool[2];
+        int id[2];
+        __u32 serial[2];
+	struct wacom_features *features;
+};
+
+#endif