summaryrefslogtreecommitdiffstats
path: root/drivers/input
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-05-26 12:22:27 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-05-26 12:22:27 -0700
commitce53044c68cf4fb6c50a2a0d88786be65fae7235 (patch)
tree19c21da7d261412192e189ef3fd1a9ff4e7ba5c2 /drivers/input
parent0877aa3908aaeeae8fc2850691668c4315d3db56 (diff)
parent046fae440d32cc6dec8148c7e06a8b4b987f8a2f (diff)
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc driver specific updates from Olof Johansson: "These changes are specific to some driver that may be used by multiple boards or socs. The most significant change in here is the move of the samsung iommu code from a platform specific in-kernel interface to the generic iommu subsystem." Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mmc: dt: Consolidate DT bindings iommu/exynos: Add iommu driver for EXYNOS Platforms ARM: davinci: optimize the DMA ISR ARM: davinci: implement DEBUG_LL port choice ARM: tegra: Add SMMU enabler in AHB ARM: tegra: Add Tegra AHB driver Input: pxa27x_keypad add choice to set direct_key_mask Input: pxa27x_keypad direct key may be low active Input: pxa27x_keypad bug fix for direct_key_mask Input: pxa27x_keypad keep clock on as wakeup source ARM: dt: tegra: pinmux changes for USB ULPI ARM: tegra: add USB ULPI PHY reset GPIO to device tree ARM: tegra: don't hard-code USB ULPI PHY reset_gpio ARM: tegra: change pll_p_out4's rate to 24MHz ARM: tegra: fix pclk rate ARM: tegra: reparent sclk to pll_c_out1 ARM: tegra: Add pllc clock init table ARM: dt: tegra cardhu: basic audio support ARM: dt: tegra30.dtsi: Add audio-related nodes ARM: tegra: add AUXDATA required for audio ...
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/keyboard/pxa27x_keypad.c52
1 files changed, 38 insertions, 14 deletions
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 29fe1b2be1c..7f7b72464a3 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -311,7 +311,15 @@ static void pxa27x_keypad_scan_direct(struct pxa27x_keypad *keypad)
if (pdata->enable_rotary0 || pdata->enable_rotary1)
pxa27x_keypad_scan_rotary(keypad);
- new_state = KPDK_DK(kpdk) & keypad->direct_key_mask;
+ /*
+ * The KPDR_DK only output the key pin level, so it relates to board,
+ * and low level may be active.
+ */
+ if (pdata->direct_key_low_active)
+ new_state = ~KPDK_DK(kpdk) & keypad->direct_key_mask;
+ else
+ new_state = KPDK_DK(kpdk) & keypad->direct_key_mask;
+
bits_changed = keypad->direct_key_state ^ new_state;
if (bits_changed == 0)
@@ -383,7 +391,14 @@ static void pxa27x_keypad_config(struct pxa27x_keypad *keypad)
if (pdata->direct_key_num > direct_key_num)
direct_key_num = pdata->direct_key_num;
- keypad->direct_key_mask = ((2 << direct_key_num) - 1) & ~mask;
+ /*
+ * Direct keys usage may not start from KP_DKIN0, check the platfrom
+ * mask data to config the specific.
+ */
+ if (pdata->direct_key_mask)
+ keypad->direct_key_mask = pdata->direct_key_mask;
+ else
+ keypad->direct_key_mask = ((1 << direct_key_num) - 1) & ~mask;
/* enable direct key */
if (direct_key_num)
@@ -399,7 +414,7 @@ static int pxa27x_keypad_open(struct input_dev *dev)
struct pxa27x_keypad *keypad = input_get_drvdata(dev);
/* Enable unit clock */
- clk_enable(keypad->clk);
+ clk_prepare_enable(keypad->clk);
pxa27x_keypad_config(keypad);
return 0;
@@ -410,7 +425,7 @@ static void pxa27x_keypad_close(struct input_dev *dev)
struct pxa27x_keypad *keypad = input_get_drvdata(dev);
/* Disable clock unit */
- clk_disable(keypad->clk);
+ clk_disable_unprepare(keypad->clk);
}
#ifdef CONFIG_PM
@@ -419,10 +434,14 @@ static int pxa27x_keypad_suspend(struct device *dev)
struct platform_device *pdev = to_platform_device(dev);
struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
- clk_disable(keypad->clk);
-
+ /*
+ * If the keypad is used a wake up source, clock can not be disabled.
+ * Or it can not detect the key pressing.
+ */
if (device_may_wakeup(&pdev->dev))
enable_irq_wake(keypad->irq);
+ else
+ clk_disable_unprepare(keypad->clk);
return 0;
}
@@ -433,19 +452,24 @@ static int pxa27x_keypad_resume(struct device *dev)
struct pxa27x_keypad *keypad = platform_get_drvdata(pdev);
struct input_dev *input_dev = keypad->input_dev;
- if (device_may_wakeup(&pdev->dev))
+ /*
+ * If the keypad is used as wake up source, the clock is not turned
+ * off. So do not need configure it again.
+ */
+ if (device_may_wakeup(&pdev->dev)) {
disable_irq_wake(keypad->irq);
+ } else {
+ mutex_lock(&input_dev->mutex);
- mutex_lock(&input_dev->mutex);
+ if (input_dev->users) {
+ /* Enable unit clock */
+ clk_prepare_enable(keypad->clk);
+ pxa27x_keypad_config(keypad);
+ }
- if (input_dev->users) {
- /* Enable unit clock */
- clk_enable(keypad->clk);
- pxa27x_keypad_config(keypad);
+ mutex_unlock(&input_dev->mutex);
}
- mutex_unlock(&input_dev->mutex);
-
return 0;
}