Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 315 insertions, 315 deletions

diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h
index e330da0c5fc..3942efbbfb5 100644
--- a/drivers/isdn/hardware/eicon/divacapi.h
+++ b/drivers/isdn/hardware/eicon/divacapi.h
@@ -1,26 +1,26 @@
 
 /*
  *
-  Copyright (c) Eicon Networks, 2002.
+ Copyright (c) Eicon Networks, 2002.
  *
-  This source file is supplied for the use with
-  Eicon Networks range of DIVA Server Adapters.
+ This source file is supplied for the use with
+ Eicon Networks range of DIVA Server Adapters.
  *
-  Eicon File Revision :    2.1
+ Eicon File Revision :    2.1
  *
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2, or (at your option)
-  any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
  *
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY
-  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-  See the GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY
+ implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
  *
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
 
@@ -29,8 +29,8 @@
 
 
 
-  
-  
+
+
 
 
 
@@ -82,7 +82,7 @@
 #define CODEC_PERMANENT    0x02
 #define ADV_VOICE          0x03
 #define MAX_CIP_TYPES      5  /* kind of CIP types for group optimization */
-#define C_IND_MASK_DWORDS  ((MAX_APPL+32) >> 5)
+#define C_IND_MASK_DWORDS  ((MAX_APPL + 32) >> 5)
 
 
 #define FAX_CONNECT_INFO_BUFFER_SIZE  256
@@ -116,289 +116,289 @@ typedef struct msn_config_max_s MSN_CONFIG_MAX;
 typedef struct msn_ld_s MSN_LD;
 
 struct manufacturer_profile_s {
-  dword private_options;
-  dword rtp_primary_payloads;
-  dword rtp_additional_payloads;
+	dword private_options;
+	dword rtp_primary_payloads;
+	dword rtp_additional_payloads;
 };
 
 struct fax_ncpi_s {
-  word options;
-  word format;
+	word options;
+	word format;
 };
 
 struct msn_config_s {
-  byte msn[MAX_CPN_MASK_SIZE];
+	byte msn[MAX_CPN_MASK_SIZE];
 };
 
 struct msn_config_max_s {
-  MSN_CONFIG    msn_conf[MAX_MSN_CONFIG];
+	MSN_CONFIG    msn_conf[MAX_MSN_CONFIG];
 };
 
 struct msn_ld_s {
-  dword low;
-  dword high;
+	dword low;
+	dword high;
 };
 
 struct api_parse_s {
-  word          length;
-  byte   *    info;
+	word          length;
+	byte *info;
 };
 
 struct api_save_s {
-  API_PARSE     parms[MAX_MSG_PARMS+1];
-  byte          info[MAX_MSG_SIZE];
+	API_PARSE     parms[MAX_MSG_PARMS + 1];
+	byte          info[MAX_MSG_SIZE];
 };
 
 struct _DATA_B3_DESC {
-  word          Handle;
-  word          Number;
-  word          Flags;
-  word          Length;
-  void   *    P;
+	word          Handle;
+	word          Number;
+	word          Flags;
+	word          Length;
+	void *P;
 };
 
 struct _DATA_ACK_DESC {
-  word          Handle;
-  word          Number;
+	word          Handle;
+	word          Number;
 };
 
-typedef void (* t_std_internal_command)(dword Id, PLCI   *plci, byte Rc);
+typedef void (*t_std_internal_command)(dword Id, PLCI *plci, byte Rc);
 
 /************************************************************************/
 /* Don't forget to adapt dos.asm after changing the _APPL structure!!!! */
 struct _APPL {
-  word          Id;
-  word          NullCREnable;
-  word          CDEnable;
-  dword         S_Handle;
+	word          Id;
+	word          NullCREnable;
+	word          CDEnable;
+	dword         S_Handle;
 
 
 
 
 
 
-  LIST_ENTRY    s_function;
-  dword         s_context;
-  word          s_count;
-  APPL *        s_next;
-  byte *        xbuffer_used;
-  void **       xbuffer_internal;
-  void **       xbuffer_ptr;
+	LIST_ENTRY    s_function;
+	dword         s_context;
+	word          s_count;
+	APPL *s_next;
+	byte *xbuffer_used;
+	void **xbuffer_internal;
+	void **xbuffer_ptr;
 
 
 
 
 
 
-  byte   *    queue;
-  word          queue_size;
-  word          queue_free;
-  word          queue_read;
-  word          queue_write;
-  word          queue_signal;
-  byte          msg_lost;
-  byte          appl_flags;
-  word          Number;
+	byte *queue;
+	word          queue_size;
+	word          queue_free;
+	word          queue_read;
+	word          queue_write;
+	word          queue_signal;
+	byte          msg_lost;
+	byte          appl_flags;
+	word          Number;
 
-  word          MaxBuffer;
-  byte          MaxNCCI;
-  byte          MaxNCCIData;
-  word          MaxDataLength;
-  word          NCCIDataFlowCtrlTimer;
-  byte   *    ReceiveBuffer;
-  word   *    DataNCCI;
-  word   *    DataFlags;
+	word          MaxBuffer;
+	byte          MaxNCCI;
+	byte          MaxNCCIData;
+	word          MaxDataLength;
+	word          NCCIDataFlowCtrlTimer;
+	byte *ReceiveBuffer;
+	word *DataNCCI;
+	word *DataFlags;
 };
 
 
 struct _PLCI {
-  ENTITY        Sig;
-  ENTITY        NL;
-  word          RNum;
-  word          RFlags;
-  BUFFERS       RData[2];
-  BUFFERS       XData[1];
-  BUFFERS       NData[2];
-
-  DIVA_CAPI_ADAPTER   *adapter;
-  APPL      *appl;
-  PLCI      *relatedPTYPLCI;
-  byte          Id;
-  byte          State;
-  byte          sig_req;
-  byte          nl_req;
-  byte          SuppState;
-  byte          channels;
-  byte          tel;
-  byte          B1_resource;
-  byte          B2_prot;
-  byte          B3_prot;
-
-  word          command;
-  word          m_command;
-  word          internal_command;
-  word          number;
-  word          req_in_start;
-  word          req_in;
-  word          req_out;
-  word          msg_in_write_pos;
-  word          msg_in_read_pos;
-  word          msg_in_wrap_pos;
-
-  void   *    data_sent_ptr;
-  byte          data_sent;
-  byte          send_disc;
-  byte          sig_global_req;
-  byte          sig_remove_id;
-  byte          nl_global_req;
-  byte          nl_remove_id;
-  byte          b_channel;
-  byte          adv_nl;
-  byte          manufacturer;
-  byte          call_dir;
-  byte          hook_state;
-  byte          spoofed_msg;
-  byte          ptyState;
-  byte          cr_enquiry;
-  word          hangup_flow_ctrl_timer;
-
-  word          ncci_ring_list;
-  byte          inc_dis_ncci_table[MAX_CHANNELS_PER_PLCI];
-  t_std_internal_command internal_command_queue[MAX_INTERNAL_COMMAND_LEVELS];
-  dword         c_ind_mask_table[C_IND_MASK_DWORDS];
-  dword         group_optimization_mask_table[C_IND_MASK_DWORDS];
-  byte          RBuffer[200];
-  dword         msg_in_queue[MSG_IN_QUEUE_SIZE/sizeof(dword)];
-  API_SAVE      saved_msg;
-  API_SAVE      B_protocol;
-  byte          fax_connect_info_length;
-  byte          fax_connect_info_buffer[FAX_CONNECT_INFO_BUFFER_SIZE];
-  byte          fax_edata_ack_length;
-  word          nsf_control_bits;
-  byte          ncpi_state;
-  byte          ncpi_buffer[NCPI_BUFFER_SIZE];
-
-  byte          internal_req_buffer[INTERNAL_REQ_BUFFER_SIZE];
-  byte          internal_ind_buffer[INTERNAL_IND_BUFFER_SIZE + 3];
-  dword         requested_options_conn;
-  dword         requested_options;
-  word          B1_facilities;
-  API_SAVE   *adjust_b_parms_msg;
-  word          adjust_b_facilities;
-  word          adjust_b_command;
-  word          adjust_b_ncci;
-  word          adjust_b_mode;
-  word          adjust_b_state;
-  byte          adjust_b_restore;
-
-  byte          dtmf_rec_active;
-  word          dtmf_rec_pulse_ms;
-  word          dtmf_rec_pause_ms;
-  byte          dtmf_send_requests;
-  word          dtmf_send_pulse_ms;
-  word          dtmf_send_pause_ms;
-  word          dtmf_cmd;
-  word          dtmf_msg_number_queue[8];
-  byte          dtmf_parameter_length;
-  byte          dtmf_parameter_buffer[DTMF_PARAMETER_BUFFER_SIZE];
-
-
-  t_capidtmf_state capidtmf_state;
-
-
-  byte          li_bchannel_id;    /* BRI: 1..2, PRI: 1..32 */
-  byte          li_channel_bits;
-  byte          li_notify_update;
-  word          li_cmd;
-  word          li_write_command;
-  word          li_write_channel;
-  word          li_plci_b_write_pos;
-  word          li_plci_b_read_pos;
-  word          li_plci_b_req_pos;
-  dword         li_plci_b_queue[LI_PLCI_B_QUEUE_ENTRIES];
-
-
-  word          ec_cmd;
-  word          ec_idi_options;
-  word          ec_tail_length;
-
-
-  byte          tone_last_indication_code;
-
-  byte          vswitchstate;
-  byte          vsprot;
-  byte          vsprotdialect;
-  byte          notifiedcall; /* Flag if it is a spoofed call */
-
-  int           rx_dma_descriptor;
-  dword         rx_dma_magic;
+	ENTITY        Sig;
+	ENTITY        NL;
+	word          RNum;
+	word          RFlags;
+	BUFFERS       RData[2];
+	BUFFERS       XData[1];
+	BUFFERS       NData[2];
+
+	DIVA_CAPI_ADAPTER   *adapter;
+	APPL      *appl;
+	PLCI      *relatedPTYPLCI;
+	byte          Id;
+	byte          State;
+	byte          sig_req;
+	byte          nl_req;
+	byte          SuppState;
+	byte          channels;
+	byte          tel;
+	byte          B1_resource;
+	byte          B2_prot;
+	byte          B3_prot;
+
+	word          command;
+	word          m_command;
+	word          internal_command;
+	word          number;
+	word          req_in_start;
+	word          req_in;
+	word          req_out;
+	word          msg_in_write_pos;
+	word          msg_in_read_pos;
+	word          msg_in_wrap_pos;
+
+	void *data_sent_ptr;
+	byte          data_sent;
+	byte          send_disc;
+	byte          sig_global_req;
+	byte          sig_remove_id;
+	byte          nl_global_req;
+	byte          nl_remove_id;
+	byte          b_channel;
+	byte          adv_nl;
+	byte          manufacturer;
+	byte          call_dir;
+	byte          hook_state;
+	byte          spoofed_msg;
+	byte          ptyState;
+	byte          cr_enquiry;
+	word          hangup_flow_ctrl_timer;
+
+	word          ncci_ring_list;
+	byte          inc_dis_ncci_table[MAX_CHANNELS_PER_PLCI];
+	t_std_internal_command internal_command_queue[MAX_INTERNAL_COMMAND_LEVELS];
+	dword         c_ind_mask_table[C_IND_MASK_DWORDS];
+	dword         group_optimization_mask_table[C_IND_MASK_DWORDS];
+	byte          RBuffer[200];
+	dword         msg_in_queue[MSG_IN_QUEUE_SIZE/sizeof(dword)];
+	API_SAVE      saved_msg;
+	API_SAVE      B_protocol;
+	byte          fax_connect_info_length;
+	byte          fax_connect_info_buffer[FAX_CONNECT_INFO_BUFFER_SIZE];
+	byte          fax_edata_ack_length;
+	word          nsf_control_bits;
+	byte          ncpi_state;
+	byte          ncpi_buffer[NCPI_BUFFER_SIZE];
+
+	byte          internal_req_buffer[INTERNAL_REQ_BUFFER_SIZE];
+	byte          internal_ind_buffer[INTERNAL_IND_BUFFER_SIZE + 3];
+	dword         requested_options_conn;
+	dword         requested_options;
+	word          B1_facilities;
+	API_SAVE   *adjust_b_parms_msg;
+	word          adjust_b_facilities;
+	word          adjust_b_command;
+	word          adjust_b_ncci;
+	word          adjust_b_mode;
+	word          adjust_b_state;
+	byte          adjust_b_restore;
+
+	byte          dtmf_rec_active;
+	word          dtmf_rec_pulse_ms;
+	word          dtmf_rec_pause_ms;
+	byte          dtmf_send_requests;
+	word          dtmf_send_pulse_ms;
+	word          dtmf_send_pause_ms;
+	word          dtmf_cmd;
+	word          dtmf_msg_number_queue[8];
+	byte          dtmf_parameter_length;
+	byte          dtmf_parameter_buffer[DTMF_PARAMETER_BUFFER_SIZE];
+
+
+	t_capidtmf_state capidtmf_state;
+
+
+	byte          li_bchannel_id;    /* BRI: 1..2, PRI: 1..32 */
+	byte          li_channel_bits;
+	byte          li_notify_update;
+	word          li_cmd;
+	word          li_write_command;
+	word          li_write_channel;
+	word          li_plci_b_write_pos;
+	word          li_plci_b_read_pos;
+	word          li_plci_b_req_pos;
+	dword         li_plci_b_queue[LI_PLCI_B_QUEUE_ENTRIES];
+
+
+	word          ec_cmd;
+	word          ec_idi_options;
+	word          ec_tail_length;
+
+
+	byte          tone_last_indication_code;
+
+	byte          vswitchstate;
+	byte          vsprot;
+	byte          vsprotdialect;
+	byte          notifiedcall; /* Flag if it is a spoofed call */
+
+	int           rx_dma_descriptor;
+	dword         rx_dma_magic;
 };
 
 
 struct _NCCI {
-  byte          data_out;
-  byte          data_pending;
-  byte          data_ack_out;
-  byte          data_ack_pending;
-  DATA_B3_DESC  DBuffer[MAX_DATA_B3];
-  DATA_ACK_DESC DataAck[MAX_DATA_ACK];
+	byte          data_out;
+	byte          data_pending;
+	byte          data_ack_out;
+	byte          data_ack_pending;
+	DATA_B3_DESC  DBuffer[MAX_DATA_B3];
+	DATA_ACK_DESC DataAck[MAX_DATA_ACK];
 };
 
 
 struct _DIVA_CAPI_ADAPTER {
-  IDI_CALL      request;
-  byte          Id;
-  byte          max_plci;
-  byte          max_listen;
-  byte          listen_active;
-  PLCI      *plci;
-  byte          ch_ncci[MAX_NL_CHANNEL+1];
-  byte          ncci_ch[MAX_NCCI+1];
-  byte          ncci_plci[MAX_NCCI+1];
-  byte          ncci_state[MAX_NCCI+1];
-  byte          ncci_next[MAX_NCCI+1];
-  NCCI          ncci[MAX_NCCI+1];
-
-  byte          ch_flow_control[MAX_NL_CHANNEL+1];  /* Used by XON protocol */
-  byte          ch_flow_control_pending;
-  byte          ch_flow_plci[MAX_NL_CHANNEL+1];
-  int           last_flow_control_ch;
-
-  dword         Info_Mask[MAX_APPL];
-  dword         CIP_Mask[MAX_APPL];
-
-  dword         Notification_Mask[MAX_APPL];
-  PLCI      *codec_listen[MAX_APPL];
-  dword         requested_options_table[MAX_APPL];
-  API_PROFILE   profile;
-  MANUFACTURER_PROFILE man_profile;
-  dword         manufacturer_features;
-
-  byte          AdvCodecFLAG;
-  PLCI      *AdvCodecPLCI;
-  PLCI      *AdvSignalPLCI;
-  APPL      *AdvSignalAppl;
-  byte          TelOAD[23];
-  byte          TelOSA[23];
-  byte          scom_appl_disable;
-  PLCI      *automatic_lawPLCI;
-  byte          automatic_law;
-  byte          u_law;
-
-  byte          adv_voice_coef_length;
-  byte          adv_voice_coef_buffer[ADV_VOICE_COEF_BUFFER_SIZE];
-
-  byte          li_pri;
-  byte          li_channels;
-  word          li_base;
-
-  byte adapter_disabled;
-  byte group_optimization_enabled; /* use application groups if enabled */
-  dword sdram_bar;
-  byte flag_dynamic_l1_down; /* for hunt groups:down layer 1 if no appl present*/
-  byte FlowControlIdTable[256];
-  byte FlowControlSkipTable[256];
-  void* os_card; /* pointer to associated OS dependent adapter structure */
+	IDI_CALL      request;
+	byte          Id;
+	byte          max_plci;
+	byte          max_listen;
+	byte          listen_active;
+	PLCI      *plci;
+	byte          ch_ncci[MAX_NL_CHANNEL + 1];
+	byte          ncci_ch[MAX_NCCI + 1];
+	byte          ncci_plci[MAX_NCCI + 1];
+	byte          ncci_state[MAX_NCCI + 1];
+	byte          ncci_next[MAX_NCCI + 1];
+	NCCI          ncci[MAX_NCCI + 1];
+
+	byte          ch_flow_control[MAX_NL_CHANNEL + 1];  /* Used by XON protocol */
+	byte          ch_flow_control_pending;
+	byte          ch_flow_plci[MAX_NL_CHANNEL + 1];
+	int           last_flow_control_ch;
+
+	dword         Info_Mask[MAX_APPL];
+	dword         CIP_Mask[MAX_APPL];
+
+	dword         Notification_Mask[MAX_APPL];
+	PLCI      *codec_listen[MAX_APPL];
+	dword         requested_options_table[MAX_APPL];
+	API_PROFILE   profile;
+	MANUFACTURER_PROFILE man_profile;
+	dword         manufacturer_features;
+
+	byte          AdvCodecFLAG;
+	PLCI      *AdvCodecPLCI;
+	PLCI      *AdvSignalPLCI;
+	APPL      *AdvSignalAppl;
+	byte          TelOAD[23];
+	byte          TelOSA[23];
+	byte          scom_appl_disable;
+	PLCI      *automatic_lawPLCI;
+	byte          automatic_law;
+	byte          u_law;
+
+	byte          adv_voice_coef_length;
+	byte          adv_voice_coef_buffer[ADV_VOICE_COEF_BUFFER_SIZE];
+
+	byte          li_pri;
+	byte          li_channels;
+	word          li_base;
+
+	byte adapter_disabled;
+	byte group_optimization_enabled; /* use application groups if enabled */
+	dword sdram_bar;
+	byte flag_dynamic_l1_down; /* for hunt groups:down layer 1 if no appl present*/
+	byte FlowControlIdTable[256];
+	byte FlowControlSkipTable[256];
+	void *os_card; /* pointer to associated OS dependent adapter structure */
 };
 
 
@@ -451,23 +451,23 @@ struct _DIVA_CAPI_ADAPTER {
 
 typedef struct t30_info_s T30_INFO;
 struct t30_info_s {
-  byte          code;
-  byte          rate_div_2400;
-  byte          resolution;
-  byte          data_format;
-  byte          pages_low;
-  byte          pages_high;
-  byte          operating_mode;
-  byte          control_bits_low;
-  byte          control_bits_high;
-  byte          feature_bits_low;
-  byte          feature_bits_high;
-  byte          recording_properties;
-  byte          universal_6;
-  byte          universal_7;
-  byte          station_id_len;
-  byte          head_line_len;
-  byte          station_id[T30_MAX_STATION_ID_LENGTH];
+	byte          code;
+	byte          rate_div_2400;
+	byte          resolution;
+	byte          data_format;
+	byte          pages_low;
+	byte          pages_high;
+	byte          operating_mode;
+	byte          control_bits_low;
+	byte          control_bits_high;
+	byte          feature_bits_low;
+	byte          feature_bits_high;
+	byte          recording_properties;
+	byte          universal_6;
+	byte          universal_7;
+	byte          station_id_len;
+	byte          head_line_len;
+	byte          station_id[T30_MAX_STATION_ID_LENGTH];
 /* byte          head_line[];      */
 /* byte          sub_sep_length;   */
 /* byte          sub_sep_field[];  */
@@ -528,13 +528,13 @@ struct t30_info_s {
 #define T30_OPERATING_MODE_CAPI_NEG     4
 #define T30_OPERATING_MODE_COUNT        5
 
-        /* EDATA transmit messages */
+/* EDATA transmit messages */
 #define EDATA_T30_DIS         0x01
 #define EDATA_T30_FTT         0x02
 #define EDATA_T30_MCF         0x03
 #define EDATA_T30_PARAMETERS  0x04
 
-        /* EDATA receive messages */
+/* EDATA receive messages */
 #define EDATA_T30_DCS         0x81
 #define EDATA_T30_TRAIN_OK    0x82
 #define EDATA_T30_EOP         0x83
@@ -639,11 +639,11 @@ struct t30_info_s {
 
 typedef struct async_s ASYNC_FORMAT;
 struct async_s {
-  unsigned pe:    1;
-  unsigned parity:2;
-  unsigned spare: 2;
-  unsigned stp:   1;
-  unsigned ch_len:2;   /* 3th octett in CAI */
+	unsigned pe:1;
+	unsigned parity:2;
+	unsigned spare:2;
+	unsigned stp:1;
+	unsigned ch_len:2;   /* 3th octett in CAI */
 };
 
 
@@ -686,14 +686,14 @@ struct async_s {
 /*------------------------------------------------------------------*/
 /* Capi IE + Msg types                                              */
 /*------------------------------------------------------------------*/
-#define ESC_CAUSE        0x800|CAU          /* Escape cause element */
-#define ESC_MSGTYPE      0x800|MSGTYPEIE    /* Escape message type  */
-#define ESC_CHI          0x800|CHI          /* Escape channel id    */
-#define ESC_LAW          0x800|BC           /* Escape law info      */
-#define ESC_CR           0x800|CRIE         /* Escape CallReference */
-#define ESC_PROFILE      0x800|PROFILEIE    /* Escape profile       */
-#define ESC_SSEXT        0x800|SSEXTIE      /* Escape Supplem. Serv.*/
-#define ESC_VSWITCH      0x800|VSWITCHIE    /* Escape VSwitch       */
+#define ESC_CAUSE        0x800 | CAU        /* Escape cause element */
+#define ESC_MSGTYPE      0x800 | MSGTYPEIE  /* Escape message type  */
+#define ESC_CHI          0x800 | CHI        /* Escape channel id    */
+#define ESC_LAW          0x800 | BC         /* Escape law info      */
+#define ESC_CR           0x800 | CRIE       /* Escape CallReference */
+#define ESC_PROFILE      0x800 | PROFILEIE  /* Escape profile       */
+#define ESC_SSEXT        0x800 | SSEXTIE    /* Escape Supplem. Serv.*/
+#define ESC_VSWITCH      0x800 | VSWITCHIE  /* Escape VSwitch       */
 #define CST              0x14               /* Call State i.e.      */
 #define PI               0x1E               /* Progress Indicator   */
 #define NI               0x27               /* Notification Ind     */
@@ -903,25 +903,25 @@ struct async_s {
 typedef struct li_config_s LI_CONFIG;
 
 struct xconnect_card_address_s {
-  dword low;
-  dword high;
+	dword low;
+	dword high;
 };
 
 struct xconnect_transfer_address_s {
-  struct xconnect_card_address_s card_address;
-  dword offset;
+	struct xconnect_card_address_s card_address;
+	dword offset;
 };
 
 struct li_config_s {
-  DIVA_CAPI_ADAPTER   *adapter;
-  PLCI   *plci;
-  struct xconnect_transfer_address_s send_b;
-  struct xconnect_transfer_address_s send_pc;
-  byte   *flag_table;  /* dword aligned and sized */
-  byte   *coef_table;  /* dword aligned and sized */
-  byte channel;
-  byte curchnl;
-  byte chflags;
+	DIVA_CAPI_ADAPTER   *adapter;
+	PLCI   *plci;
+	struct xconnect_transfer_address_s send_b;
+	struct xconnect_transfer_address_s send_pc;
+	byte   *flag_table;  /* dword aligned and sized */
+	byte   *coef_table;  /* dword aligned and sized */
+	byte channel;
+	byte curchnl;
+	byte chflags;
 };
 
 extern LI_CONFIG   *li_config_table;
@@ -1110,33 +1110,33 @@ extern word li_total_channels;
 #define B1_PIAFS                29
 #define B2_PIAFS                29
 
-#define PRIVATE_PIAFS           29 
+#define PRIVATE_PIAFS           29
 
 /*
   B2 configuration for PIAFS:
-+---------------------+------+-----------------------------------------+
-| PIAFS Protocol      | byte | Bit 1 - Protocol Speed                  |
-| Speed configuration |      |         0 - 32K                         |
-|                     |      |         1 - 64K (default)               |
-|                     |      | Bit 2 - Variable Protocol Speed         |
-|                     |      |         0 - Speed is fix                |
-|                     |      |         1 - Speed is variable (default) |
-+---------------------+------+-----------------------------------------+
-| Direction           | word | Enable compression/decompression for    |
-|                     |      | 0: All direction                        |
-|                     |      | 1: disable outgoing data                |
-|                     |      | 2: disable incomming data               |
-|                     |      | 3: disable both direction (default)     |
-+---------------------+------+-----------------------------------------+
-| Number of code      | word | Parameter P1 of V.42bis in accordance   |
-| words               |      | with V.42bis                            |
-+---------------------+------+-----------------------------------------+
-| Maximum String      | word | Parameter P2 of V.42bis in accordance   |
-| Length              |      | with V.42bis                            |
-+---------------------+------+-----------------------------------------+
-| control (UDATA)     | byte | enable PIAFS control communication      |
-| abilities           |      |                                         |
-+---------------------+------+-----------------------------------------+
+  +---------------------+------+-----------------------------------------+
+  | PIAFS Protocol      | byte | Bit 1 - Protocol Speed                  |
+  | Speed configuration |      |         0 - 32K                         |
+  |                     |      |         1 - 64K (default)               |
+  |                     |      | Bit 2 - Variable Protocol Speed         |
+  |                     |      |         0 - Speed is fix                |
+  |                     |      |         1 - Speed is variable (default) |
+  +---------------------+------+-----------------------------------------+
+  | Direction           | word | Enable compression/decompression for    |
+  |                     |      | 0: All direction                        |
+  |                     |      | 1: disable outgoing data                |
+  |                     |      | 2: disable incomming data               |
+  |                     |      | 3: disable both direction (default)     |
+  +---------------------+------+-----------------------------------------+
+  | Number of code      | word | Parameter P1 of V.42bis in accordance   |
+  | words               |      | with V.42bis                            |
+  +---------------------+------+-----------------------------------------+
+  | Maximum String      | word | Parameter P2 of V.42bis in accordance   |
+  | Length              |      | with V.42bis                            |
+  +---------------------+------+-----------------------------------------+
+  | control (UDATA)     | byte | enable PIAFS control communication      |
+  | abilities           |      |                                         |
+  +---------------------+------+-----------------------------------------+
 */
 #define PIAFS_UDATA_ABILITIES  0x80