Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 36 insertions, 36 deletions

diff --git a/drivers/isdn/hardware/eicon/mdm_msg.h b/drivers/isdn/hardware/eicon/mdm_msg.h
index 7a737e10bce..0e6b2e009a7 100644
--- a/drivers/isdn/hardware/eicon/mdm_msg.h
+++ b/drivers/isdn/hardware/eicon/mdm_msg.h
@@ -1,26 +1,26 @@
 
 /*
  *
-  Copyright (c) Eicon Networks, 2002.
+ Copyright (c) Eicon Networks, 2002.
  *
-  This source file is supplied for the use with
-  Eicon Networks range of DIVA Server Adapters.
+ This source file is supplied for the use with
+ Eicon Networks range of DIVA Server Adapters.
  *
-  Eicon File Revision :    2.1
+ Eicon File Revision :    2.1
  *
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2, or (at your option)
-  any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2, or (at your option)
+ any later version.
  *
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY
-  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-  See the GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY
+ implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU General Public License for more details.
  *
-  You should have received a copy of the GNU General Public License
-  along with this program; if not, write to the Free Software
-  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  */
 #ifndef __EICON_MDM_MSG_H__
@@ -30,18 +30,18 @@
 #define DSP_UDATA_INDICATION_CTS_OFF  0x03
 #define DSP_UDATA_INDICATION_CTS_ON  0x04
 /* =====================================================================
-DCD_OFF Message:
-  <word> time of DCD off (sampled from counter at 8kHz)
-DCD_ON Message:
-  <word> time of DCD on (sampled from counter at 8kHz)
-  <byte> connected norm
-  <word> connected options
-  <dword> connected speed (bit/s, max of tx and rx speed)
-  <word> roundtrip delay (ms)
-  <dword> connected speed tx (bit/s)
-  <dword> connected speed rx (bit/s)
-  Size of this message == 19 bytes, but we will receive only 11
-  ===================================================================== */
+   DCD_OFF Message:
+   <word> time of DCD off (sampled from counter at 8kHz)
+   DCD_ON Message:
+   <word> time of DCD on (sampled from counter at 8kHz)
+   <byte> connected norm
+   <word> connected options
+   <dword> connected speed (bit/s, max of tx and rx speed)
+   <word> roundtrip delay (ms)
+   <dword> connected speed tx (bit/s)
+   <dword> connected speed rx (bit/s)
+   Size of this message == 19 bytes, but we will receive only 11
+   ===================================================================== */
 #define DSP_CONNECTED_NORM_UNSPECIFIED      0
 #define DSP_CONNECTED_NORM_V21              1
 #define DSP_CONNECTED_NORM_V23              2
@@ -129,14 +129,14 @@ DCD_ON Message:
 #define DSP_CONNECTED_OPTION_MASK_COMPRESSION    0x0320
 #define DSP_UDATA_INDICATION_DISCONNECT         5
 /*
-returns:
+  returns:
   <byte> cause
 */
 /* ==========================================================
-    DLC: B2 modem configuration
+   DLC: B2 modem configuration
    ========================================================== */
 /*
-Fields in assign DLC information element for modem protocol V.42/MNP:
+  Fields in assign DLC information element for modem protocol V.42/MNP:
   <byte> length of information element
   <word> information field length
   <byte> address A       (not used, default 3)
@@ -172,10 +172,10 @@ Fields in assign DLC information element for modem protocol V.42/MNP:
 #define DLC_MODEMPROT_APPL_EARLY_CONNECT     0x01
 #define DLC_MODEMPROT_APPL_PASS_INDICATIONS  0x02
 /* ==========================================================
-    CAI parameters used for the modem L1 configuration
+   CAI parameters used for the modem L1 configuration
    ========================================================== */
 /*
-Fields in assign CAI information element:
+  Fields in assign CAI information element:
   <byte> length of information element
   <byte> info field and B-channel hardware
   <byte> rate adaptation bit rate
@@ -311,21 +311,21 @@ Fields in assign CAI information element:
 #define DSP_CAI_MODEM_SPEAKER_VOLUME_MAX   0x0c
 #define DSP_CAI_MODEM_SPEAKER_VOLUME_MASK  0x0c
 /* ==========================================================
-    DCD/CTS State
+   DCD/CTS State
    ========================================================== */
 #define MDM_WANT_CONNECT_B3_ACTIVE_I  0x01
 #define MDM_NCPI_VALID                0x02
 #define MDM_NCPI_CTS_ON_RECEIVED      0x04
 #define MDM_NCPI_DCD_ON_RECEIVED      0x08
 /* ==========================================================
-    CAPI NCPI Constants
+   CAPI NCPI Constants
    ========================================================== */
 #define MDM_NCPI_ECM_V42              0x0001
 #define MDM_NCPI_ECM_MNP              0x0002
 #define MDM_NCPI_TRANSPARENT          0x0004
 #define MDM_NCPI_COMPRESSED           0x0010
 /* ==========================================================
-    CAPI B2 Config Constants
+   CAPI B2 Config Constants
    ========================================================== */
 #define MDM_B2_DISABLE_V42bis         0x0001
 #define MDM_B2_DISABLE_MNP            0x0002
@@ -333,7 +333,7 @@ Fields in assign CAI information element:
 #define MDM_B2_DISABLE_V42            0x0008
 #define MDM_B2_DISABLE_COMP           0x0010
 /* ==========================================================
-    CAPI B1 Config Constants
+   CAPI B1 Config Constants
    ========================================================== */
 #define MDM_CAPI_DISABLE_RETRAIN      0x0001
 #define MDM_CAPI_DISABLE_RING_TONE    0x0002