Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 92 insertions, 92 deletions

diff --git a/drivers/isdn/hisax/bkm_a8.c b/drivers/isdn/hisax/bkm_a8.c
index e775706c60e..c9c98f071af 100644
--- a/drivers/isdn/hisax/bkm_a8.c
+++ b/drivers/isdn/hisax/bkm_a8.c
@@ -4,7 +4,7 @@
  *
  * Author       Roland Klabunde
  * Copyright    by Roland Klabunde   <R.Klabunde@Berkom.de>
- * 
+ *
  * This software may be used and distributed according to the terms
  * of the GNU General Public License, incorporated herein by reference.
  *
@@ -34,7 +34,7 @@ static const char *sct_quadro_subtypes[] =
 };
 
 
-#define wordout(addr,val) outw(val,addr)
+#define wordout(addr, val) outw(val, addr)
 #define wordin(addr) inw(addr)
 
 static inline u_char
@@ -47,7 +47,7 @@ readreg(unsigned int ale, unsigned int adr, u_char off)
 }
 
 static inline void
-readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+readfifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
 {
 	int i;
 	wordout(ale, off);
@@ -64,7 +64,7 @@ writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
 }
 
 static inline void
-writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+writefifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
 {
 	int i;
 	wordout(ale, off);
@@ -87,13 +87,13 @@ WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
 }
 
 static void
-ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
 {
 	readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
 }
 
 static void
-WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
 {
 	writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
 }
@@ -117,21 +117,21 @@ set_ipac_active(struct IsdnCardState *cs, u_int active)
 {
 	/* set irq mask */
 	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
-		active ? 0xc0 : 0xff);
+		 active ? 0xc0 : 0xff);
 }
 
 /*
  * fast interrupt HSCX stuff goes here
  */
 
-#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
-	cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
-#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
-	cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
-#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
-	cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
-#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
-	cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
+#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base,			\
+				      cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
+#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base,		\
+					      cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
+#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base,		\
+						cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
+#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base,	\
+						  cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
 
 #include "hscx_irq.c"
 
@@ -148,7 +148,7 @@ bkm_interrupt_ipac(int intno, void *dev_id)
 		spin_unlock_irqrestore(&cs->lock, flags);
 		return IRQ_NONE;
 	}
-      Start_IPAC:
+Start_IPAC:
 	if (cs->debug & L1_DEB_IPAC)
 		debugl1(cs, "IPAC ISTA %02X", ista);
 	if (ista & 0x0f) {
@@ -224,33 +224,33 @@ BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	u_long flags;
 
 	switch (mt) {
-		case CARD_RESET:
-			spin_lock_irqsave(&cs->lock, flags);
-			/* Disable ints */
-			set_ipac_active(cs, 0);
-			enable_bkm_int(cs, 0);
-			reset_bkm(cs);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			return (0);
-		case CARD_RELEASE:
-			/* Sanity */
-			spin_lock_irqsave(&cs->lock, flags);
-			set_ipac_active(cs, 0);
-			enable_bkm_int(cs, 0);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			release_io_sct_quadro(cs);
-			return (0);
-		case CARD_INIT:
-			spin_lock_irqsave(&cs->lock, flags);
-			cs->debug |= L1_DEB_IPAC;
-			set_ipac_active(cs, 1);
-			inithscxisac(cs, 3);
-			/* Enable ints */
-			enable_bkm_int(cs, 1);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			return (0);
-		case CARD_TEST:
-			return (0);
+	case CARD_RESET:
+		spin_lock_irqsave(&cs->lock, flags);
+		/* Disable ints */
+		set_ipac_active(cs, 0);
+		enable_bkm_int(cs, 0);
+		reset_bkm(cs);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return (0);
+	case CARD_RELEASE:
+		/* Sanity */
+		spin_lock_irqsave(&cs->lock, flags);
+		set_ipac_active(cs, 0);
+		enable_bkm_int(cs, 0);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		release_io_sct_quadro(cs);
+		return (0);
+	case CARD_INIT:
+		spin_lock_irqsave(&cs->lock, flags);
+		cs->debug |= L1_DEB_IPAC;
+		set_ipac_active(cs, 1);
+		inithscxisac(cs, 3);
+		/* Enable ints */
+		enable_bkm_int(cs, 1);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return (0);
+	case CARD_TEST:
+		return (0);
 	}
 	return (0);
 }
@@ -260,11 +260,11 @@ sct_alloc_io(u_int adr, u_int len)
 {
 	if (!request_region(adr, len, "scitel")) {
 		printk(KERN_WARNING
-			"HiSax: Scitel port %#x-%#x already in use\n",
-			adr, adr + len);
+		       "HiSax: Scitel port %#x-%#x already in use\n",
+		       adr, adr + len);
 		return (1);
 	}
-	return(0);
+	return (0);
 }
 
 static struct pci_dev *dev_a8 __devinitdata = NULL;
@@ -298,18 +298,18 @@ setup_sct_quadro(struct IsdnCard *card)
 		return (0);
 	}
 	if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
-		(sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
+				      (sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
 		return (0);
 	if (cs->subtyp == SCT_1) {
 		while ((dev_a8 = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
-			PCI_DEVICE_ID_PLX_9050, dev_a8))) {
-			
+						       PCI_DEVICE_ID_PLX_9050, dev_a8))) {
+
 			sub_vendor_id = dev_a8->subsystem_vendor;
 			sub_sys_id = dev_a8->subsystem_device;
 			if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
-				(sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
+			    (sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
 				if (pci_enable_device(dev_a8))
-					return(0);
+					return (0);
 				pci_ioaddr1 = pci_resource_start(dev_a8, 1);
 				pci_irq = dev_a8->irq;
 				pci_bus = dev_a8->bus->number;
@@ -320,23 +320,23 @@ setup_sct_quadro(struct IsdnCard *card)
 		}
 		if (!found) {
 			printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
-				"Card not found\n",
-				sct_quadro_subtypes[cs->subtyp]);
+			       "Card not found\n",
+			       sct_quadro_subtypes[cs->subtyp]);
 			return (0);
 		}
 #ifdef ATTEMPT_PCI_REMAPPING
 /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
 		if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
 			printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
-				"PLX rev 1, remapping required!\n",
-				sct_quadro_subtypes[cs->subtyp]);
+			       "PLX rev 1, remapping required!\n",
+			       sct_quadro_subtypes[cs->subtyp]);
 			/* Restart PCI negotiation */
-			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
+			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int)-1);
 			/* Move up by 0x80 byte */
 			pci_ioaddr1 += 0x80;
 			pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
 			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
-			dev_a8->resource[ 1].start = pci_ioaddr1;
+			dev_a8->resource[1].start = pci_ioaddr1;
 		}
 #endif /* End HACK */
 	}
@@ -371,39 +371,39 @@ setup_sct_quadro(struct IsdnCard *card)
 	/* pci_ioaddr5 is for the first subdevice only */
 	cs->hw.ax.plx_adr = pci_ioaddr1;
 	/* Enter all ipac_base addresses */
-	switch(cs->subtyp) {
-		case 1:
-			cs->hw.ax.base = pci_ioaddr5 + 0x00;
-			if (sct_alloc_io(pci_ioaddr1, 128))
-				return(0);
-			if (sct_alloc_io(pci_ioaddr5, 64))
-				return(0);
-			/* disable all IPAC */
-			writereg(pci_ioaddr5, pci_ioaddr5 + 4,
-				IPAC_MASK, 0xFF);
-			writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
-				IPAC_MASK, 0xFF);
-			writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
-				IPAC_MASK, 0xFF);
-			writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
-				IPAC_MASK, 0xFF);
-			break;
-		case 2:
-			cs->hw.ax.base = pci_ioaddr4 + 0x08;
-			if (sct_alloc_io(pci_ioaddr4, 64))
-				return(0);
-			break;
-		case 3:
-			cs->hw.ax.base = pci_ioaddr3 + 0x10;
-			if (sct_alloc_io(pci_ioaddr3, 64))
-				return(0);
-			break;
-		case 4:
-			cs->hw.ax.base = pci_ioaddr2 + 0x20;
-			if (sct_alloc_io(pci_ioaddr2, 64))
-				return(0);
-			break;
-	}	
+	switch (cs->subtyp) {
+	case 1:
+		cs->hw.ax.base = pci_ioaddr5 + 0x00;
+		if (sct_alloc_io(pci_ioaddr1, 128))
+			return (0);
+		if (sct_alloc_io(pci_ioaddr5, 64))
+			return (0);
+		/* disable all IPAC */
+		writereg(pci_ioaddr5, pci_ioaddr5 + 4,
+			 IPAC_MASK, 0xFF);
+		writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
+			 IPAC_MASK, 0xFF);
+		writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
+			 IPAC_MASK, 0xFF);
+		writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
+			 IPAC_MASK, 0xFF);
+		break;
+	case 2:
+		cs->hw.ax.base = pci_ioaddr4 + 0x08;
+		if (sct_alloc_io(pci_ioaddr4, 64))
+			return (0);
+		break;
+	case 3:
+		cs->hw.ax.base = pci_ioaddr3 + 0x10;
+		if (sct_alloc_io(pci_ioaddr3, 64))
+			return (0);
+		break;
+	case 4:
+		cs->hw.ax.base = pci_ioaddr2 + 0x20;
+		if (sct_alloc_io(pci_ioaddr2, 64))
+			return (0);
+		break;
+	}
 	/* For isac and hscx data path */
 	cs->hw.ax.data_adr = cs->hw.ax.base + 4;
 
@@ -429,7 +429,7 @@ setup_sct_quadro(struct IsdnCard *card)
 	cs->irq_func = &bkm_interrupt_ipac;
 
 	printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
-		sct_quadro_subtypes[cs->subtyp],
-		readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
+	       sct_quadro_subtypes[cs->subtyp],
+	       readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
 	return (1);
 }