isdn: whitespace coding style cleanup

isdn source code uses a not-current coding style.

Update the coding style used on a per-line basis
so that git diff -w shows only elided blank lines
at EOF.

Done with emacs and some scripts and some typing.

Built x86 allyesconfig.
No detected change in objdump -d or size.

Signed-off-by: Joe Perches <joe@perches.com>

1 files changed, 100 insertions, 100 deletions

diff --git a/drivers/isdn/hisax/enternow_pci.c b/drivers/isdn/hisax/enternow_pci.c
index f55d29d6082..b1e38b54eba 100644
--- a/drivers/isdn/hisax/enternow_pci.c
+++ b/drivers/isdn/hisax/enternow_pci.c
@@ -97,13 +97,13 @@ static unsigned char
 ReadByteAmd7930(struct IsdnCardState *cs, unsigned char offset)
 {
 	/* direct register */
-	if(offset < 8)
-		return (inb(cs->hw.njet.isac + 4*offset));
+	if (offset < 8)
+		return (inb(cs->hw.njet.isac + 4 * offset));
 
 	/* indirect register */
 	else {
-		outb(offset, cs->hw.njet.isac + 4*AMD_CR);
-		return(inb(cs->hw.njet.isac + 4*AMD_DR));
+		outb(offset, cs->hw.njet.isac + 4 * AMD_CR);
+		return (inb(cs->hw.njet.isac + 4 * AMD_DR));
 	}
 }
 
@@ -112,29 +112,29 @@ static void
 WriteByteAmd7930(struct IsdnCardState *cs, unsigned char offset, unsigned char value)
 {
 	/* direct register */
-	if(offset < 8)
-		outb(value, cs->hw.njet.isac + 4*offset);
+	if (offset < 8)
+		outb(value, cs->hw.njet.isac + 4 * offset);
 
 	/* indirect register */
 	else {
-		outb(offset, cs->hw.njet.isac + 4*AMD_CR);
-		outb(value, cs->hw.njet.isac + 4*AMD_DR);
+		outb(offset, cs->hw.njet.isac + 4 * AMD_CR);
+		outb(value, cs->hw.njet.isac + 4 * AMD_DR);
 	}
 }
 
 
 static void
 enpci_setIrqMask(struct IsdnCardState *cs, unsigned char val) {
-        if (!val)
-	        outb(0x00, cs->hw.njet.base+NETJET_IRQMASK1);
-        else
-	        outb(TJ_AMD_IRQ, cs->hw.njet.base+NETJET_IRQMASK1);
+	if (!val)
+		outb(0x00, cs->hw.njet.base + NETJET_IRQMASK1);
+	else
+		outb(TJ_AMD_IRQ, cs->hw.njet.base + NETJET_IRQMASK1);
 }
 
 
 static unsigned char dummyrr(struct IsdnCardState *cs, int chan, unsigned char off)
 {
-        return(5);
+	return (5);
 }
 
 static void dummywr(struct IsdnCardState *cs, int chan, unsigned char off, unsigned char value)
@@ -173,70 +173,70 @@ static int
 enpci_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 {
 	u_long flags;
-        unsigned char *chan;
+	unsigned char *chan;
 
 	if (cs->debug & L1_DEB_ISAC)
 		debugl1(cs, "enter:now PCI: card_msg: 0x%04X", mt);
 
-        switch (mt) {
-		case CARD_RESET:
-			spin_lock_irqsave(&cs->lock, flags);
-			reset_enpci(cs);
-                        Amd7930_init(cs);
-                        spin_unlock_irqrestore(&cs->lock, flags);
-			break;
-		case CARD_RELEASE:
-			release_io_netjet(cs);
-			break;
-		case CARD_INIT:
-			reset_enpci(cs);
-			inittiger(cs);
-			/* irq must be on here */
-			Amd7930_init(cs);
-			break;
-		case CARD_TEST:
-			break;
-                case MDL_ASSIGN:
-                        /* TEI assigned, LED1 on */
-                        cs->hw.njet.auxd = TJ_AMD_IRQ << 1;
-                        outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA);
-                        break;
-                case MDL_REMOVE:
-                        /* TEI removed, LEDs off */
-	                cs->hw.njet.auxd = 0;
-                        outb(0x00, cs->hw.njet.base + NETJET_AUXDATA);
-                        break;
-                case MDL_BC_ASSIGN:
-                        /* activate B-channel */
-                        chan = (unsigned char *)arg;
-
-                        if (cs->debug & L1_DEB_ISAC)
-		                debugl1(cs, "enter:now PCI: assign phys. BC %d in AMD LMR1", *chan);
-
-                        cs->dc.amd7930.ph_command(cs, (cs->dc.amd7930.lmr1 | (*chan + 1)), "MDL_BC_ASSIGN");
-                        /* at least one b-channel in use, LED 2 on */
-                        cs->hw.njet.auxd |= TJ_AMD_IRQ << 2;
-                        outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA);
-                        break;
-                case MDL_BC_RELEASE:
-                        /* deactivate B-channel */
-                        chan = (unsigned char *)arg;
-
-                        if (cs->debug & L1_DEB_ISAC)
-		                debugl1(cs, "enter:now PCI: release phys. BC %d in Amd LMR1", *chan);
-
-                        cs->dc.amd7930.ph_command(cs, (cs->dc.amd7930.lmr1 & ~(*chan + 1)), "MDL_BC_RELEASE");
-                        /* no b-channel active -> LED2 off */
-                        if (!(cs->dc.amd7930.lmr1 & 3)) {
-                                cs->hw.njet.auxd &= ~(TJ_AMD_IRQ << 2);
-                                outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA);
-                        }
-                        break;
-                default:
-                        break;
+	switch (mt) {
+	case CARD_RESET:
+		spin_lock_irqsave(&cs->lock, flags);
+		reset_enpci(cs);
+		Amd7930_init(cs);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		break;
+	case CARD_RELEASE:
+		release_io_netjet(cs);
+		break;
+	case CARD_INIT:
+		reset_enpci(cs);
+		inittiger(cs);
+		/* irq must be on here */
+		Amd7930_init(cs);
+		break;
+	case CARD_TEST:
+		break;
+	case MDL_ASSIGN:
+		/* TEI assigned, LED1 on */
+		cs->hw.njet.auxd = TJ_AMD_IRQ << 1;
+		outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA);
+		break;
+	case MDL_REMOVE:
+		/* TEI removed, LEDs off */
+		cs->hw.njet.auxd = 0;
+		outb(0x00, cs->hw.njet.base + NETJET_AUXDATA);
+		break;
+	case MDL_BC_ASSIGN:
+		/* activate B-channel */
+		chan = (unsigned char *)arg;
+
+		if (cs->debug & L1_DEB_ISAC)
+			debugl1(cs, "enter:now PCI: assign phys. BC %d in AMD LMR1", *chan);
+
+		cs->dc.amd7930.ph_command(cs, (cs->dc.amd7930.lmr1 | (*chan + 1)), "MDL_BC_ASSIGN");
+		/* at least one b-channel in use, LED 2 on */
+		cs->hw.njet.auxd |= TJ_AMD_IRQ << 2;
+		outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA);
+		break;
+	case MDL_BC_RELEASE:
+		/* deactivate B-channel */
+		chan = (unsigned char *)arg;
+
+		if (cs->debug & L1_DEB_ISAC)
+			debugl1(cs, "enter:now PCI: release phys. BC %d in Amd LMR1", *chan);
+
+		cs->dc.amd7930.ph_command(cs, (cs->dc.amd7930.lmr1 & ~(*chan + 1)), "MDL_BC_RELEASE");
+		/* no b-channel active -> LED2 off */
+		if (!(cs->dc.amd7930.lmr1 & 3)) {
+			cs->hw.njet.auxd &= ~(TJ_AMD_IRQ << 2);
+			outb(cs->hw.njet.auxd, cs->hw.njet.base + NETJET_AUXDATA);
+		}
+		break;
+	default:
+		break;
 
 	}
-	return(0);
+	return (0);
 }
 
 static irqreturn_t
@@ -249,32 +249,32 @@ enpci_interrupt(int intno, void *dev_id)
 	spin_lock_irqsave(&cs->lock, flags);
 	s1val = inb(cs->hw.njet.base + NETJET_IRQSTAT1);
 
-        /* AMD threw an interrupt */
+	/* AMD threw an interrupt */
 	if (!(s1val & TJ_AMD_IRQ)) {
-                /* read and clear interrupt-register */
+		/* read and clear interrupt-register */
 		ir = ReadByteAmd7930(cs, 0x00);
 		Amd7930_interrupt(cs, ir);
 		s1val = 1;
 	} else
 		s1val = 0;
 	s0val = inb(cs->hw.njet.base + NETJET_IRQSTAT0);
-	if ((s0val | s1val)==0) { // shared IRQ
+	if ((s0val | s1val) == 0) { // shared IRQ
 		spin_unlock_irqrestore(&cs->lock, flags);
 		return IRQ_NONE;
-	} 
+	}
 	if (s0val)
 		outb(s0val, cs->hw.njet.base + NETJET_IRQSTAT0);
 
 	/* DMA-Interrupt: B-channel-stuff */
 	/* set bits in sval to indicate which page is free */
 	if (inl(cs->hw.njet.base + NETJET_DMA_WRITE_ADR) <
-		inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ))
+	    inl(cs->hw.njet.base + NETJET_DMA_WRITE_IRQ))
 		/* the 2nd write page is free */
 		s0val = 0x08;
 	else	/* the 1st write page is free */
 		s0val = 0x04;
 	if (inl(cs->hw.njet.base + NETJET_DMA_READ_ADR) <
-		inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ))
+	    inl(cs->hw.njet.base + NETJET_DMA_READ_IRQ))
 		/* the 2nd read page is free */
 		s0val = s0val | 0x02;
 	else	/* the 1st read page is free */
@@ -287,11 +287,11 @@ enpci_interrupt(int intno, void *dev_id)
 		}
 		cs->hw.njet.irqstat0 = s0val;
 		if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_READ) !=
-			(cs->hw.njet.last_is0 & NETJET_IRQM0_READ))
+		    (cs->hw.njet.last_is0 & NETJET_IRQM0_READ))
 			/* we have a read dma int */
 			read_tiger(cs);
 		if ((cs->hw.njet.irqstat0 & NETJET_IRQM0_WRITE) !=
-			(cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE))
+		    (cs->hw.njet.last_is0 & NETJET_IRQM0_WRITE))
 			/* we have a write dma int */
 			write_tiger(cs);
 		test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
@@ -304,26 +304,26 @@ static int __devinit en_pci_probe(struct pci_dev *dev_netjet,
 				  struct IsdnCardState *cs)
 {
 	if (pci_enable_device(dev_netjet))
-		return(0);
+		return (0);
 	cs->irq = dev_netjet->irq;
 	if (!cs->irq) {
 		printk(KERN_WARNING "enter:now PCI: No IRQ for PCI card found\n");
-		return(0);
+		return (0);
 	}
 	cs->hw.njet.base = pci_resource_start(dev_netjet, 0);
 	if (!cs->hw.njet.base) {
 		printk(KERN_WARNING "enter:now PCI: No IO-Adr for PCI card found\n");
-		return(0);
+		return (0);
 	}
 	/* checks Sub-Vendor ID because system crashes with Traverse-Card */
 	if ((dev_netjet->subsystem_vendor != 0x55) ||
 	    (dev_netjet->subsystem_device != 0x02)) {
 		printk(KERN_WARNING "enter:now: You tried to load this driver with an incompatible TigerJet-card\n");
 		printk(KERN_WARNING "Use type=20 for Traverse NetJet PCI Card.\n");
-		return(0);
+		return (0);
 	}
 
-	return(1);
+	return (1);
 }
 
 static void __devinit en_cs_init(struct IsdnCard *card,
@@ -356,8 +356,8 @@ static int __devinit en_cs_init_rest(struct IsdnCard *card,
 	const int bytecnt = 256;
 
 	printk(KERN_INFO
-		"enter:now PCI: PCI card configured at 0x%lx IRQ %d\n",
-		cs->hw.njet.base, cs->irq);
+	       "enter:now PCI: PCI card configured at 0x%lx IRQ %d\n",
+	       cs->hw.njet.base, cs->irq);
 	if (!request_region(cs->hw.njet.base, bytecnt, "Fn_ISDN")) {
 		printk(KERN_WARNING
 		       "HiSax: enter:now config port %lx-%lx already in use\n",
@@ -368,13 +368,13 @@ static int __devinit en_cs_init_rest(struct IsdnCard *card,
 
 	setup_Amd7930(cs);
 	cs->hw.njet.last_is0 = 0;
-        /* macro rByteAMD */
-        cs->readisac = &ReadByteAmd7930;
-        /* macro wByteAMD */
-        cs->writeisac = &WriteByteAmd7930;
-        cs->dc.amd7930.setIrqMask = &enpci_setIrqMask;
+	/* macro rByteAMD */
+	cs->readisac = &ReadByteAmd7930;
+	/* macro wByteAMD */
+	cs->writeisac = &WriteByteAmd7930;
+	cs->dc.amd7930.setIrqMask = &enpci_setIrqMask;
 
-        cs->BC_Read_Reg  = &dummyrr;
+	cs->BC_Read_Reg  = &dummyrr;
 	cs->BC_Write_Reg = &dummywr;
 	cs->BC_Send_Data = &netjet_fill_dma;
 	cs->cardmsg = &enpci_card_msg;
@@ -398,27 +398,27 @@ setup_enternow_pci(struct IsdnCard *card)
 #error "not running on big endian machines now"
 #endif
 
-        strcpy(tmp, enternow_pci_rev);
+	strcpy(tmp, enternow_pci_rev);
 	printk(KERN_INFO "HiSax: Formula-n Europe AG enter:now ISDN PCI driver Rev. %s\n", HiSax_getrev(tmp));
 	if (cs->typ != ISDN_CTYPE_ENTERNOW)
-		return(0);
+		return (0);
 	test_and_clear_bit(FLG_LOCK_ATOMIC, &cs->HW_Flags);
 
-	for ( ;; )
+	for (;;)
 	{
 		if ((dev_netjet = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
-			PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
+							PCI_DEVICE_ID_TIGERJET_300,  dev_netjet))) {
 			ret = en_pci_probe(dev_netjet, cs);
 			if (!ret)
-				return(0);
+				return (0);
 		} else {
-                        printk(KERN_WARNING "enter:now PCI: No PCI card found\n");
-			return(0);
+			printk(KERN_WARNING "enter:now PCI: No PCI card found\n");
+			return (0);
 		}
 
 		en_cs_init(card, cs);
 		break;
 	}
 
-        return en_cs_init_rest(card, cs);
+	return en_cs_init_rest(card, cs);
 }