Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking merge from David Miller:
 "1) Move ixgbe driver over to purely page based buffering on receive.
     From Alexander Duyck.

  2) Add receive packet steering support to e1000e, from Bruce Allan.

  3) Convert TCP MD5 support over to RCU, from Eric Dumazet.

  4) Reduce cpu usage in handling out-of-order TCP packets on modern
     systems, also from Eric Dumazet.

  5) Support the IP{,V6}_UNICAST_IF socket options, making the wine
     folks happy, from Erich Hoover.

  6) Support VLAN trunking from guests in hyperv driver, from Haiyang
     Zhang.

  7) Support byte-queue-limtis in r8169, from Igor Maravic.

  8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but
     was never properly implemented, Jiri Benc fixed that.

  9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang.

  10) Support kernel side dump filtering by ctmark in netfilter
      ctnetlink, from Pablo Neira Ayuso.

  11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker.

  12) Add new peek socket options to assist with socket migration, from
      Pavel Emelyanov.

  13) Add sch_plug packet scheduler whose queue is controlled by
      userland daemons using explicit freeze and release commands.  From
      Shriram Rajagopalan.

  14) Fix FCOE checksum offload handling on transmit, from Yi Zou."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits)
  Fix pppol2tp getsockname()
  Remove printk from rds_sendmsg
  ipv6: fix incorrent ipv6 ipsec packet fragment
  cpsw: Hook up default ndo_change_mtu.
  net: qmi_wwan: fix build error due to cdc-wdm dependecy
  netdev: driver: ethernet: Add TI CPSW driver
  netdev: driver: ethernet: add cpsw address lookup engine support
  phy: add am79c874 PHY support
  mlx4_core: fix race on comm channel
  bonding: send igmp report for its master
  fs_enet: Add MPC5125 FEC support and PHY interface selection
  net: bpf_jit: fix BPF_S_LDX_B_MSH compilation
  net: update the usage of CHECKSUM_UNNECESSARY
  fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx
  net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso
  ixgbe: Fix issues with SR-IOV loopback when flow control is disabled
  net/hyperv: Fix the code handling tx busy
  ixgbe: fix namespace issues when FCoE/DCB is not enabled
  rtlwifi: Remove unused ETH_ADDR_LEN defines
  igbvf: Use ETH_ALEN
  ...

Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and
drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.

1 files changed, 164 insertions, 164 deletions

diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
index 69dfc8d2901..1ee531b6be9 100644
--- a/drivers/isdn/hisax/sedlbauer.c
+++ b/drivers/isdn/hisax/sedlbauer.c
@@ -9,7 +9,7 @@
  *
  * Author       Marcus Niemann
  * Copyright    by Marcus Niemann    <niemann@www-bib.fh-bielefeld.de>
- * 
+ *
  * This software may be used and distributed according to the terms
  * of the GNU General Public License, incorporated herein by reference.
  *
@@ -30,13 +30,13 @@
  * ISDN PC/104	IPAC		DIP-SWITCH
  * Speed Star2	IPAC		CARDMGR
  * Speed PCI	IPAC		PCI PNP
- * Speed Fax+ 	ISAC_ISAR	PCI PNP		Full analog support
+ * Speed Fax+	ISAC_ISAR	PCI PNP		Full analog support
  *
  * Important:
  * For the sedlbauer speed fax+ to work properly you have to download
  * the firmware onto the card.
  * For example: hisaxctrl <DriverID> 9 ISAR.BIN
-*/
+ */
 
 #include <linux/init.h>
 #include "hisax.h"
@@ -51,9 +51,9 @@
 static const char *Sedlbauer_revision = "$Revision: 1.34.2.6 $";
 
 static const char *Sedlbauer_Types[] =
-	{"None", "speed card/win", "speed star", "speed fax+",
-	"speed win II / ISDN PC/104", "speed star II", "speed pci",
-	"speed fax+ pyramid", "speed fax+ pci", "HST Saphir III"};
+{"None", "speed card/win", "speed star", "speed fax+",
+ "speed win II / ISDN PC/104", "speed star II", "speed pci",
+ "speed fax+ pyramid", "speed fax+ pci", "HST Saphir III"};
 
 #define PCI_SUBVENDOR_SPEEDFAX_PYRAMID	0x51
 #define PCI_SUBVENDOR_HST_SAPHIR3	0x52
@@ -62,11 +62,11 @@ static const char *Sedlbauer_Types[] =
 #define PCI_SUB_ID_SEDLBAUER		0x01
 
 #define SEDL_SPEED_CARD_WIN	1
-#define SEDL_SPEED_STAR 	2
+#define SEDL_SPEED_STAR		2
 #define SEDL_SPEED_FAX		3
-#define SEDL_SPEED_WIN2_PC104 	4
-#define SEDL_SPEED_STAR2 	5
-#define SEDL_SPEED_PCI   	6
+#define SEDL_SPEED_WIN2_PC104	4
+#define SEDL_SPEED_STAR2	5
+#define SEDL_SPEED_PCI		6
 #define SEDL_SPEEDFAX_PYRAMID	7
 #define SEDL_SPEEDFAX_PCI	8
 #define HST_SAPHIR3		9
@@ -80,7 +80,7 @@ static const char *Sedlbauer_Types[] =
 #define SEDL_BUS_PCI		2
 #define	SEDL_BUS_PCMCIA		3
 
-#define byteout(addr,val) outb(val,addr)
+#define byteout(addr, val) outb(val, addr)
 #define bytein(addr) inb(addr)
 
 #define SEDL_HSCX_ISA_RESET_ON	0
@@ -127,7 +127,7 @@ readreg(unsigned int ale, unsigned int adr, u_char off)
 }
 
 static inline void
-readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+readfifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
 {
 	byteout(ale, off);
 	insb(adr, data, size);
@@ -142,7 +142,7 @@ writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
 }
 
 static inline void
-writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+writefifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
 {
 	byteout(ale, off);
 	outsb(adr, data, size);
@@ -163,13 +163,13 @@ WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
 }
 
 static void
-ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
 {
 	readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
 }
 
 static void
-WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
 {
 	writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
 }
@@ -177,23 +177,23 @@ WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
 static u_char
 ReadISAC_IPAC(struct IsdnCardState *cs, u_char offset)
 {
-	return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80));
+	return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset | 0x80));
 }
 
 static void
 WriteISAC_IPAC(struct IsdnCardState *cs, u_char offset, u_char value)
 {
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80, value);
+	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset | 0x80, value);
 }
 
 static void
-ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
+ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char *data, int size)
 {
 	readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
 }
 
 static void
-WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
+WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char *data, int size)
 {
 	writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
 }
@@ -220,12 +220,12 @@ WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
 
 static u_char
 ReadISAR(struct IsdnCardState *cs, int mode, u_char offset)
-{	
+{
 	if (mode == 0)
 		return (readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, offset));
 	else if (mode == 1)
 		byteout(cs->hw.sedl.adr, offset);
-	return(bytein(cs->hw.sedl.hscx));
+	return (bytein(cs->hw.sedl.hscx));
 }
 
 static void
@@ -244,16 +244,16 @@ WriteISAR(struct IsdnCardState *cs, int mode, u_char offset, u_char value)
  * fast interrupt HSCX stuff goes here
  */
 
-#define READHSCX(cs, nr, reg) readreg(cs->hw.sedl.adr, \
-		cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0))
-#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.sedl.adr, \
-		cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0), data)
+#define READHSCX(cs, nr, reg) readreg(cs->hw.sedl.adr,			\
+				      cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0))
+#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.sedl.adr,		\
+					      cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0), data)
 
-#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.sedl.adr, \
-		cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
+#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.sedl.adr,	\
+						cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
 
-#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.sedl.adr, \
-		cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
+#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.sedl.adr,	\
+						  cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
 
 #include "hscx_irq.c"
 
@@ -274,11 +274,11 @@ sedlbauer_interrupt(int intno, void *dev_id)
 	}
 
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
-      Start_HSCX:
+Start_HSCX:
 	if (val)
 		hscx_int_main(cs, val);
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
-      Start_ISAC:
+Start_ISAC:
 	if (val)
 		isac_interrupt(cs, val);
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
@@ -360,11 +360,11 @@ sedlbauer_interrupt_isar(int intno, void *dev_id)
 
 	spin_lock_irqsave(&cs->lock, flags);
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
-      Start_ISAR:
+Start_ISAR:
 	if (val & ISAR_IRQSTA)
 		isar_int_main(cs);
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
-      Start_ISAC:
+Start_ISAC:
 	if (val)
 		isac_interrupt(cs, val);
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
@@ -411,7 +411,7 @@ reset_sedlbauer(struct IsdnCardState *cs)
 	printk(KERN_INFO "Sedlbauer: resetting card\n");
 
 	if (!((cs->hw.sedl.bus == SEDL_BUS_PCMCIA) &&
-	   (cs->hw.sedl.chip == SEDL_CHIP_ISAC_HSCX))) {
+	      (cs->hw.sedl.chip == SEDL_CHIP_ISAC_HSCX))) {
 		if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
 			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_POTA2, 0x20);
 			mdelay(2);
@@ -423,12 +423,12 @@ reset_sedlbauer(struct IsdnCardState *cs)
 			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xc0);
 			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_PCFG, 0x12);
 		} else if ((cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) &&
-			(cs->hw.sedl.bus == SEDL_BUS_PCI)) {
-			byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
+			   (cs->hw.sedl.bus == SEDL_BUS_PCI)) {
+			byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_on);
 			mdelay(2);
-			byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
+			byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
 			mdelay(10);
-		} else {		
+		} else {
 			byteout(cs->hw.sedl.reset_on, SEDL_RESET);	/* Reset On */
 			mdelay(2);
 			byteout(cs->hw.sedl.reset_off, 0);	/* Reset Off */
@@ -443,86 +443,86 @@ Sedl_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	u_long flags;
 
 	switch (mt) {
-		case CARD_RESET:
-			spin_lock_irqsave(&cs->lock, flags);
-			reset_sedlbauer(cs);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			return(0);
-		case CARD_RELEASE:
-			if (cs->hw.sedl.bus == SEDL_BUS_PCI)
-				/* disable all IRQ */
-				byteout(cs->hw.sedl.cfg_reg+ 5, 0);
-			if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
-				spin_lock_irqsave(&cs->lock, flags);
-				writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
-					ISAR_IRQBIT, 0);
-				writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
-					ISAC_MASK, 0xFF);
-				reset_sedlbauer(cs);
-				writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
-					ISAR_IRQBIT, 0);
-				writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
-					ISAC_MASK, 0xFF);
-				spin_unlock_irqrestore(&cs->lock, flags);
-			}
-			release_io_sedlbauer(cs);
-			return(0);
-		case CARD_INIT:
+	case CARD_RESET:
+		spin_lock_irqsave(&cs->lock, flags);
+		reset_sedlbauer(cs);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return (0);
+	case CARD_RELEASE:
+		if (cs->hw.sedl.bus == SEDL_BUS_PCI)
+			/* disable all IRQ */
+			byteout(cs->hw.sedl.cfg_reg + 5, 0);
+		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
 			spin_lock_irqsave(&cs->lock, flags);
-			if (cs->hw.sedl.bus == SEDL_BUS_PCI)
-				/* enable all IRQ */
-				byteout(cs->hw.sedl.cfg_reg+ 5, 0x02);
+			writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
+				 ISAR_IRQBIT, 0);
+			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
+				 ISAC_MASK, 0xFF);
 			reset_sedlbauer(cs);
-			if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
-				clear_pending_isac_ints(cs);
-				writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
-					ISAR_IRQBIT, 0);
-				initisac(cs);
-				initisar(cs);
-				/* Reenable all IRQ */
-				cs->writeisac(cs, ISAC_MASK, 0);
-				/* RESET Receiver and Transmitter */
-				cs->writeisac(cs, ISAC_CMDR, 0x41);
-			} else {
-				inithscxisac(cs, 3);
-			}
+			writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
+				 ISAR_IRQBIT, 0);
+			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
+				 ISAC_MASK, 0xFF);
 			spin_unlock_irqrestore(&cs->lock, flags);
-			return(0);
-		case CARD_TEST:
-			return(0);
-		case MDL_INFO_CONN:
-			if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
-				return(0);
-			spin_lock_irqsave(&cs->lock, flags);
-			if ((long) arg)
-				cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED2;
-			else
-				cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED1;
-			byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			break;
-		case MDL_INFO_REL:
-			if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
-				return(0);
-			spin_lock_irqsave(&cs->lock, flags);
-			if ((long) arg)
-				cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED2;
-			else
-				cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED1;
-			byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			break;
+		}
+		release_io_sedlbauer(cs);
+		return (0);
+	case CARD_INIT:
+		spin_lock_irqsave(&cs->lock, flags);
+		if (cs->hw.sedl.bus == SEDL_BUS_PCI)
+			/* enable all IRQ */
+			byteout(cs->hw.sedl.cfg_reg + 5, 0x02);
+		reset_sedlbauer(cs);
+		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
+			clear_pending_isac_ints(cs);
+			writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
+				 ISAR_IRQBIT, 0);
+			initisac(cs);
+			initisar(cs);
+			/* Reenable all IRQ */
+			cs->writeisac(cs, ISAC_MASK, 0);
+			/* RESET Receiver and Transmitter */
+			cs->writeisac(cs, ISAC_CMDR, 0x41);
+		} else {
+			inithscxisac(cs, 3);
+		}
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return (0);
+	case CARD_TEST:
+		return (0);
+	case MDL_INFO_CONN:
+		if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
+			return (0);
+		spin_lock_irqsave(&cs->lock, flags);
+		if ((long) arg)
+			cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED2;
+		else
+			cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED1;
+		byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		break;
+	case MDL_INFO_REL:
+		if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
+			return (0);
+		spin_lock_irqsave(&cs->lock, flags);
+		if ((long) arg)
+			cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED2;
+		else
+			cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED1;
+		byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		break;
 	}
-	return(0);
+	return (0);
 }
 
 #ifdef __ISAPNP__
 static struct isapnp_device_id sedl_ids[] __devinitdata = {
 	{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
-	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01), 
+	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
 	  (unsigned long) "Speed win" },
 	{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
-	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02), 
+	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
 	  (unsigned long) "Speed Fax+" },
 	{ 0, }
 };
@@ -539,31 +539,31 @@ setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt)
 	if (!isapnp_present())
 		return -1;
 
-	while(ipid->card_vendor) {
+	while (ipid->card_vendor) {
 		if ((pnp_c = pnp_find_card(ipid->card_vendor,
-			ipid->card_device, pnp_c))) {
+					   ipid->card_device, pnp_c))) {
 			pnp_d = NULL;
 			if ((pnp_d = pnp_find_dev(pnp_c,
-				ipid->vendor, ipid->function, pnp_d))) {
+						  ipid->vendor, ipid->function, pnp_d))) {
 				int err;
 
 				printk(KERN_INFO "HiSax: %s detected\n",
-					(char *)ipid->driver_data);
+				       (char *)ipid->driver_data);
 				pnp_disable_dev(pnp_d);
 				err = pnp_activate_dev(pnp_d);
-				if (err<0) {
+				if (err < 0) {
 					printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
-						__func__, err);
-					return(0);
+					       __func__, err);
+					return (0);
 				}
 				card->para[1] = pnp_port_start(pnp_d, 0);
 				card->para[0] = pnp_irq(pnp_d, 0);
 
 				if (!card->para[0] || !card->para[1]) {
 					printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
-						card->para[0], card->para[1]);
+					       card->para[0], card->para[1]);
 					pnp_disable_dev(pnp_d);
-					return(0);
+					return (0);
 				}
 				cs->hw.sedl.cfg_reg = card->para[1];
 				cs->irq = card->para[0];
@@ -579,12 +579,12 @@ setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt)
 				return (1);
 			} else {
 				printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
-				return(0);
+				return (0);
 			}
 		}
 		ipid++;
 		pnp_c = NULL;
-	} 
+	}
 
 	printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
 	return -1;
@@ -608,30 +608,30 @@ setup_sedlbauer_pci(struct IsdnCard *card)
 	u16 sub_vendor_id, sub_id;
 
 	if ((dev_sedl = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
-			PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
+					      PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
 		if (pci_enable_device(dev_sedl))
-			return(0);
+			return (0);
 		cs->irq = dev_sedl->irq;
 		if (!cs->irq) {
 			printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
-			return(0);
+			return (0);
 		}
 		cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
 	} else {
 		printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
-		return(0);
+		return (0);
 	}
 	cs->irq_flags |= IRQF_SHARED;
 	cs->hw.sedl.bus = SEDL_BUS_PCI;
 	sub_vendor_id = dev_sedl->subsystem_vendor;
 	sub_id = dev_sedl->subsystem_device;
 	printk(KERN_INFO "Sedlbauer: PCI subvendor:%x subid %x\n",
-		sub_vendor_id, sub_id);
+	       sub_vendor_id, sub_id);
 	printk(KERN_INFO "Sedlbauer: PCI base adr %#x\n",
-		cs->hw.sedl.cfg_reg);
+	       cs->hw.sedl.cfg_reg);
 	if (sub_id != PCI_SUB_ID_SEDLBAUER) {
 		printk(KERN_ERR "Sedlbauer: unknown sub id %#x\n", sub_id);
-		return(0);
+		return (0);
 	}
 	if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PYRAMID) {
 		cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
@@ -647,19 +647,19 @@ setup_sedlbauer_pci(struct IsdnCard *card)
 		cs->subtyp = SEDL_SPEED_PCI;
 	} else {
 		printk(KERN_ERR "Sedlbauer: unknown sub vendor id %#x\n",
-			sub_vendor_id);
-		return(0);
+		       sub_vendor_id);
+		return (0);
 	}
 
 	cs->hw.sedl.reset_on = SEDL_ISAR_PCI_ISAR_RESET_ON;
 	cs->hw.sedl.reset_off = SEDL_ISAR_PCI_ISAR_RESET_OFF;
 	byteout(cs->hw.sedl.cfg_reg, 0xff);
 	byteout(cs->hw.sedl.cfg_reg, 0x00);
-	byteout(cs->hw.sedl.cfg_reg+ 2, 0xdd);
-	byteout(cs->hw.sedl.cfg_reg+ 5, 0); /* disable all IRQ */
-	byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
+	byteout(cs->hw.sedl.cfg_reg + 2, 0xdd);
+	byteout(cs->hw.sedl.cfg_reg + 5, 0); /* disable all IRQ */
+	byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_on);
 	mdelay(2);
-	byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
+	byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
 	mdelay(10);
 
 	return (1);
@@ -684,20 +684,20 @@ setup_sedlbauer(struct IsdnCard *card)
 
 	strcpy(tmp, Sedlbauer_revision);
 	printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
-	
- 	if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
- 		cs->subtyp = SEDL_SPEED_CARD_WIN;
+
+	if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
+		cs->subtyp = SEDL_SPEED_CARD_WIN;
 		cs->hw.sedl.bus = SEDL_BUS_ISA;
 		cs->hw.sedl.chip = SEDL_CHIP_TEST;
- 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {	
- 		cs->subtyp = SEDL_SPEED_STAR;
+	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {
+		cs->subtyp = SEDL_SPEED_STAR;
 		cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
 		cs->hw.sedl.chip = SEDL_CHIP_TEST;
- 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {	
- 		cs->subtyp = SEDL_SPEED_FAX;
+	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {
+		cs->subtyp = SEDL_SPEED_FAX;
 		cs->hw.sedl.bus = SEDL_BUS_ISA;
 		cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
- 	} else
+	} else
 		return (0);
 
 	bytecnt = 8;
@@ -720,22 +720,22 @@ setup_sedlbauer(struct IsdnCard *card)
 			return (0);
 
 		bytecnt = 256;
-	}	
+	}
 
-ready:	
+ready:
 
 	/* In case of the sedlbauer pcmcia card, this region is in use,
 	 * reserved for us by the card manager. So we do not check it
 	 * here, it would fail.
 	 */
 	if (cs->hw.sedl.bus != SEDL_BUS_PCMCIA &&
-		!request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
+	    !request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
 		printk(KERN_WARNING
-			"HiSax: %s config port %x-%x already in use\n",
-			CardType[card->typ],
-			cs->hw.sedl.cfg_reg,
-			cs->hw.sedl.cfg_reg + bytecnt);
-			return (0);
+		       "HiSax: %s config port %x-%x already in use\n",
+		       CardType[card->typ],
+		       cs->hw.sedl.cfg_reg,
+		       cs->hw.sedl.cfg_reg + bytecnt);
+		return (0);
 	}
 
 	printk(KERN_INFO
@@ -753,12 +753,12 @@ ready:
  * testing ISA and PCMCIA Cards for IPAC, default is ISAC
  * do not test for PCI card, because ports are different
  * and PCI card uses only IPAC (for the moment)
- */	
+ */
 	if (cs->hw.sedl.bus != SEDL_BUS_PCI) {
 		val = readreg(cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR,
-			cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
+			      cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
 		printk(KERN_DEBUG "Sedlbauer: testing IPAC version %x\n", val);
-	        if ((val == 1) || (val == 2)) {
+		if ((val == 1) || (val == 2)) {
 			/* IPAC */
 			cs->subtyp = SEDL_SPEED_WIN2_PC104;
 			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
@@ -777,16 +777,16 @@ ready:
  * hw.sedl.chip is now properly set
  */
 	printk(KERN_INFO "Sedlbauer: %s detected\n",
-		Sedlbauer_Types[cs->subtyp]);
+	       Sedlbauer_Types[cs->subtyp]);
 
 	setup_isac(cs);
 	if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
 		if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
-	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
+			cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
 			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
 			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
 		} else {
-	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
+			cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
 			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
 			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
 		}
@@ -807,22 +807,22 @@ ready:
 		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
 			if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
 				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_PCI_ADR;
+					SEDL_ISAR_PCI_ADR;
 				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_PCI_ISAC;
+					SEDL_ISAR_PCI_ISAC;
 				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_PCI_ISAR;
+					SEDL_ISAR_PCI_ISAR;
 			} else {
 				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_ISA_ADR;
+					SEDL_ISAR_ISA_ADR;
 				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_ISA_ISAC;
+					SEDL_ISAR_ISA_ISAC;
 				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_ISA_ISAR;
+					SEDL_ISAR_ISA_ISAR;
 				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_ISA_ISAR_RESET_ON;
+					SEDL_ISAR_ISA_ISAR_RESET_ON;
 				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_ISA_ISAR_RESET_OFF;
+					SEDL_ISAR_ISA_ISAR_RESET_OFF;
 			}
 			cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
 			cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
@@ -838,7 +838,7 @@ ready:
 				ver = ISARVersion(cs, "Sedlbauer:");
 				if (ver < 0)
 					printk(KERN_WARNING
-						"Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
+					       "Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
 				else
 					break;
 				reset_sedlbauer(cs);
@@ -865,10 +865,10 @@ ready:
 			}
 			cs->irq_func = &sedlbauer_interrupt;
 			ISACVersion(cs, "Sedlbauer:");
-		
+
 			if (HscxVersion(cs, "Sedlbauer:")) {
 				printk(KERN_WARNING
-					"Sedlbauer: wrong HSCX versions check IO address\n");
+				       "Sedlbauer: wrong HSCX versions check IO address\n");
 				release_io_sedlbauer(cs);
 				return (0);
 			}