Merge remote branch 'origin' into secretlab/next-spi

6 files changed, 25 insertions, 193 deletions

diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c
index 8d1d63a02b3..a80a7617f16 100644
--- a/drivers/isdn/hisax/avma1_cs.c
+++ b/drivers/isdn/hisax/avma1_cs.c
@@ -62,31 +62,6 @@ static void avma1cs_release(struct pcmcia_device *link);
 static void avma1cs_detach(struct pcmcia_device *p_dev) __devexit ;
 
 
-/*
-   A linked list of "instances" of the skeleton device.  Each actual
-   PCMCIA card corresponds to one device instance, and is described
-   by one struct pcmcia_device structure (defined in ds.h).
-
-   You may not want to use a linked list for this -- for example, the
-   memory card driver uses an array of struct pcmcia_device pointers, where minor
-   device numbers are used to derive the corresponding array index.
-*/
-
-/*
-   A driver needs to provide a dev_node_t structure for each device
-   on a card.  In some cases, there is only one device per card (for
-   example, ethernet cards, modems).  In other cases, there may be
-   many actual or logical devices (SCSI adapters, memory cards with
-   multiple partitions).  The dev_node_t structures need to be kept
-   in a linked list starting at the 'dev' field of a struct pcmcia_device
-   structure.  We allocate them in the card's private data structure,
-   because they generally can't be allocated dynamically.
-*/
-   
-typedef struct local_info_t {
-    dev_node_t	node;
-} local_info_t;
-
 /*======================================================================
 
     avma1cs_attach() creates an "instance" of the driver, allocating
@@ -101,17 +76,8 @@ typedef struct local_info_t {
 
 static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
 {
-    local_info_t *local;
-
     dev_dbg(&p_dev->dev, "avma1cs_attach()\n");
 
-    /* Allocate space for private device-specific data */
-    local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
-    if (!local)
-	return -ENOMEM;
-
-    p_dev->priv = local;
-
     /* The io structure describes IO port mapping */
     p_dev->io.NumPorts1 = 16;
     p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
@@ -119,9 +85,6 @@ static int __devinit avma1cs_probe(struct pcmcia_device *p_dev)
     p_dev->io.Attributes2 = IO_DATA_PATH_WIDTH_16;
     p_dev->io.IOAddrLines = 5;
 
-    /* Interrupt setup */
-    p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-
     /* General socket configuration */
     p_dev->conf.Attributes = CONF_ENABLE_IRQ;
     p_dev->conf.IntType = INT_MEMORY_AND_IO;
@@ -176,14 +139,11 @@ static int avma1cs_configcheck(struct pcmcia_device *p_dev,
 
 static int __devinit avma1cs_config(struct pcmcia_device *link)
 {
-    local_info_t *dev;
-    int i;
+    int i = -1;
     char devname[128];
     IsdnCard_t	icard;
     int busy = 0;
 
-    dev = link->priv;
-
     dev_dbg(&link->dev, "avma1cs_config(0x%p)\n", link);
 
     devname[0] = 0;
@@ -197,8 +157,7 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
 	/*
 	 * allocate an interrupt line
 	 */
-	i = pcmcia_request_irq(link, &link->irq);
-	if (i != 0) {
+	if (!link->irq) {
 	    /* undo */
 	    pcmcia_disable_device(link);
 	    break;
@@ -215,14 +174,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
 
     } while (0);
 
-    /* At this point, the dev_node_t structure(s) should be
-       initialized and arranged in a linked list at link->dev. */
-
-    strcpy(dev->node.dev_name, "A1");
-    dev->node.major = 45;
-    dev->node.minor = 0;
-    link->dev_node = &dev->node;
-
     /* If any step failed, release any partially configured state */
     if (i != 0) {
 	avma1cs_release(link);
@@ -230,9 +181,9 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
     }
 
     printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
-				link->io.BasePort1, link->irq.AssignedIRQ);
+				link->io.BasePort1, link->irq);
 
-    icard.para[0] = link->irq.AssignedIRQ;
+    icard.para[0] = link->irq;
     icard.para[1] = link->io.BasePort1;
     icard.protocol = isdnprot;
     icard.typ = ISDN_CTYPE_A1_PCMCIA;
@@ -243,7 +194,7 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
 	avma1cs_release(link);
 	return -ENODEV;
     }
-    dev->node.minor = i;
+    link->priv = (void *) (unsigned long) i;
 
     return 0;
 } /* avma1cs_config */
@@ -258,12 +209,12 @@ static int __devinit avma1cs_config(struct pcmcia_device *link)
 
 static void avma1cs_release(struct pcmcia_device *link)
 {
-	local_info_t *local = link->priv;
+	unsigned long minor = (unsigned long) link->priv;
 
 	dev_dbg(&link->dev, "avma1cs_release(0x%p)\n", link);
 
 	/* now unregister function with hisax */
-	HiSax_closecard(local->node.minor);
+	HiSax_closecard(minor);
 
 	pcmcia_disable_device(link);
 } /* avma1cs_release */
diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c
index c9f2279e21f..218927e3a4e 100644
--- a/drivers/isdn/hisax/elsa_cs.c
+++ b/drivers/isdn/hisax/elsa_cs.c
@@ -87,24 +87,8 @@ static void elsa_cs_release(struct pcmcia_device *link);
 
 static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit;
 
-/*
-   A driver needs to provide a dev_node_t structure for each device
-   on a card.  In some cases, there is only one device per card (for
-   example, ethernet cards, modems).  In other cases, there may be
-   many actual or logical devices (SCSI adapters, memory cards with
-   multiple partitions).  The dev_node_t structures need to be kept
-   in a linked list starting at the 'dev' field of a struct pcmcia_device
-   structure.  We allocate them in the card's private data structure,
-   because they generally shouldn't be allocated dynamically.
-   In this case, we also provide a flag to indicate if a device is
-   "stopped" due to a power management event, or card ejection.  The
-   device IO routines can use a flag like this to throttle IO to a
-   card that is not ready to accept it.
-*/
-
 typedef struct local_info_t {
 	struct pcmcia_device	*p_dev;
-    dev_node_t          node;
     int                 busy;
     int			cardnr;
 } local_info_t;
@@ -136,10 +120,6 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link)
 
     local->cardnr = -1;
 
-    /* Interrupt setup */
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.Handler = NULL;
-
     /*
       General socket configuration defaults can go here.  In this
       client, we assume very little, and rely on the CIS for almost
@@ -223,28 +203,18 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
     if (i != 0)
 	goto failed;
 
-    i = pcmcia_request_irq(link, &link->irq);
-    if (i != 0) {
-        link->irq.AssignedIRQ = 0;
+    if (!link->irq)
 	goto failed;
-    }
 
     i = pcmcia_request_configuration(link, &link->conf);
     if (i != 0)
 	goto failed;
 
-    /* At this point, the dev_node_t structure(s) should be
-       initialized and arranged in a linked list at link->dev. *//*  */
-    sprintf(dev->node.dev_name, "elsa");
-    dev->node.major = dev->node.minor = 0x0;
-
-    link->dev_node = &dev->node;
-
     /* Finally, report what we've done */
-    printk(KERN_INFO "%s: index 0x%02x: ",
-           dev->node.dev_name, link->conf.ConfigIndex);
+    dev_info(&link->dev, "index 0x%02x: ",
+	    link->conf.ConfigIndex);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
-        printk(", irq %d", link->irq.AssignedIRQ);
+	printk(", irq %d", link->irq);
     if (link->io.NumPorts1)
         printk(", io 0x%04x-0x%04x", link->io.BasePort1,
                link->io.BasePort1+link->io.NumPorts1-1);
@@ -253,7 +223,7 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link)
                link->io.BasePort2+link->io.NumPorts2-1);
     printk("\n");
 
-    icard.para[0] = link->irq.AssignedIRQ;
+    icard.para[0] = link->irq;
     icard.para[1] = link->io.BasePort1;
     icard.protocol = protocol;
     icard.typ = ISDN_CTYPE_ELSA_PCMCIA;
diff --git a/drivers/isdn/hisax/hfc4s8s_l1.c b/drivers/isdn/hisax/hfc4s8s_l1.c
index 051b44e2556..384d5118e32 100644
--- a/drivers/isdn/hisax/hfc4s8s_l1.c
+++ b/drivers/isdn/hisax/hfc4s8s_l1.c
@@ -310,7 +310,7 @@ wait_busy(hfc4s8s_hw * a)
 
 /******************************************************/
 /* function to read critical counter registers that   */
-/* may be udpated by the chip during read             */
+/* may be updated by the chip during read             */
 /******************************************************/
 static u_char
 Read_hfc8_stable(hfc4s8s_hw * hw, int reg)
diff --git a/drivers/isdn/hisax/hisax_fcpcipnp.c b/drivers/isdn/hisax/hisax_fcpcipnp.c
index 1925118122f..8b0a7d86b30 100644
--- a/drivers/isdn/hisax/hisax_fcpcipnp.c
+++ b/drivers/isdn/hisax/hisax_fcpcipnp.c
@@ -74,9 +74,10 @@ static struct pnp_device_id fcpnp_ids[] __devinitdata = {
 		.id		= "AVM0900",
 		.driver_data	= (unsigned long) "Fritz!Card PnP",
 	},
+	{ .id = "" }
 };
 
-MODULE_DEVICE_TABLE(isapnp, fcpnp_ids);
+MODULE_DEVICE_TABLE(pnp, fcpnp_ids);
 #endif
 
 static int protocol = 2;       /* EURO-ISDN Default */
diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c
index 71b3ddef03b..1f4feaab21a 100644
--- a/drivers/isdn/hisax/sedlbauer_cs.c
+++ b/drivers/isdn/hisax/sedlbauer_cs.c
@@ -87,32 +87,8 @@ static void sedlbauer_release(struct pcmcia_device *link);
 
 static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit;
 
-/*
-   You'll also need to prototype all the functions that will actually
-   be used to talk to your device.  See 'memory_cs' for a good example
-   of a fully self-sufficient driver; the other drivers rely more or
-   less on other parts of the kernel.
-*/
-
-/*
-   A driver needs to provide a dev_node_t structure for each device
-   on a card.  In some cases, there is only one device per card (for
-   example, ethernet cards, modems).  In other cases, there may be
-   many actual or logical devices (SCSI adapters, memory cards with
-   multiple partitions).  The dev_node_t structures need to be kept
-   in a linked list starting at the 'dev' field of a struct pcmcia_device
-   structure.  We allocate them in the card's private data structure,
-   because they generally shouldn't be allocated dynamically.
-
-   In this case, we also provide a flag to indicate if a device is
-   "stopped" due to a power management event, or card ejection.  The
-   device IO routines can use a flag like this to throttle IO to a
-   card that is not ready to accept it.
-*/
-   
 typedef struct local_info_t {
 	struct pcmcia_device	*p_dev;
-    dev_node_t		node;
     int			stop;
     int			cardnr;
 } local_info_t;
@@ -143,10 +119,6 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link)
     local->p_dev = link;
     link->priv = local;
 
-    /* Interrupt setup */
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.Handler = NULL;
-
     /*
       General socket configuration defaults can go here.  In this
       client, we assume very little, and rely on the CIS for almost
@@ -227,9 +199,7 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
-	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
-		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
@@ -285,7 +255,6 @@ static int sedlbauer_config_check(struct pcmcia_device *p_dev,
 
 static int __devinit sedlbauer_config(struct pcmcia_device *link)
 {
-    local_info_t *dev = link->priv;
     win_req_t *req;
     int ret;
     IsdnCard_t  icard;
@@ -313,17 +282,6 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
 	    goto failed;
 
     /*
-       Allocate an interrupt line.  Note that this does not assign a
-       handler to the interrupt, unless the 'Handler' member of the
-       irq structure is initialized.
-    */
-    if (link->conf.Attributes & CONF_ENABLE_IRQ) {
-	    ret = pcmcia_request_irq(link, &link->irq);
-	    if (ret)
-		    goto failed;
-    }
-	
-    /*
        This actually configures the PCMCIA socket -- setting up
        the I/O windows and the interrupt mapping, and putting the
        card and host interface into "Memory and IO" mode.
@@ -332,21 +290,13 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
     if (ret)
 	    goto failed;
 
-    /*
-      At this point, the dev_node_t structure(s) need to be
-      initialized and arranged in a linked list at link->dev.
-    */
-    sprintf(dev->node.dev_name, "sedlbauer");
-    dev->node.major = dev->node.minor = 0;
-    link->dev_node = &dev->node;
-
     /* Finally, report what we've done */
-    printk(KERN_INFO "%s: index 0x%02x:",
-	   dev->node.dev_name, link->conf.ConfigIndex);
+    dev_info(&link->dev, "index 0x%02x:",
+	   link->conf.ConfigIndex);
     if (link->conf.Vpp)
 	printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
-	printk(", irq %d", link->irq.AssignedIRQ);
+	printk(", irq %d", link->irq);
     if (link->io.NumPorts1)
 	printk(", io 0x%04x-0x%04x", link->io.BasePort1,
 	       link->io.BasePort1+link->io.NumPorts1-1);
@@ -358,7 +308,7 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link)
 	       req->Base+req->Size-1);
     printk("\n");
 
-    icard.para[0] = link->irq.AssignedIRQ;
+    icard.para[0] = link->irq;
     icard.para[1] = link->io.BasePort1;
     icard.protocol = protocol;
     icard.typ = ISDN_CTYPE_SEDLBAUER_PCMCIA;
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index d010a0da8e1..5771955cc53 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -68,34 +68,8 @@ static void teles_cs_release(struct pcmcia_device *link);
 
 static void teles_detach(struct pcmcia_device *p_dev) __devexit ;
 
-/*
-   A linked list of "instances" of the teles_cs device.  Each actual
-   PCMCIA card corresponds to one device instance, and is described
-   by one struct pcmcia_device structure (defined in ds.h).
-
-   You may not want to use a linked list for this -- for example, the
-   memory card driver uses an array of struct pcmcia_device pointers, where minor
-   device numbers are used to derive the corresponding array index.
-*/
-
-/*
-   A driver needs to provide a dev_node_t structure for each device
-   on a card.  In some cases, there is only one device per card (for
-   example, ethernet cards, modems).  In other cases, there may be
-   many actual or logical devices (SCSI adapters, memory cards with
-   multiple partitions).  The dev_node_t structures need to be kept
-   in a linked list starting at the 'dev' field of a struct pcmcia_device
-   structure.  We allocate them in the card's private data structure,
-   because they generally shouldn't be allocated dynamically.
-   In this case, we also provide a flag to indicate if a device is
-   "stopped" due to a power management event, or card ejection.  The
-   device IO routines can use a flag like this to throttle IO to a
-   card that is not ready to accept it.
-*/
-
 typedef struct local_info_t {
 	struct pcmcia_device	*p_dev;
-    dev_node_t          node;
     int                 busy;
     int			cardnr;
 } local_info_t;
@@ -126,10 +100,6 @@ static int __devinit teles_probe(struct pcmcia_device *link)
     local->p_dev = link;
     link->priv = local;
 
-    /* Interrupt setup */
-    link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
-    link->irq.Handler = NULL;
-
     /*
       General socket configuration defaults can go here.  In this
       client, we assume very little, and rely on the CIS for almost
@@ -213,28 +183,18 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
     if (i != 0)
 	goto cs_failed;
 
-    i = pcmcia_request_irq(link, &link->irq);
-    if (i != 0) {
-        link->irq.AssignedIRQ = 0;
+    if (!link->irq)
         goto cs_failed;
-    }
 
     i = pcmcia_request_configuration(link, &link->conf);
     if (i != 0)
       goto cs_failed;
 
-    /* At this point, the dev_node_t structure(s) should be
-       initialized and arranged in a linked list at link->dev. *//*  */
-    sprintf(dev->node.dev_name, "teles");
-    dev->node.major = dev->node.minor = 0x0;
-
-    link->dev_node = &dev->node;
-
     /* Finally, report what we've done */
-    printk(KERN_INFO "%s: index 0x%02x:",
-           dev->node.dev_name, link->conf.ConfigIndex);
+    dev_info(&link->dev, "index 0x%02x:",
+	    link->conf.ConfigIndex);
     if (link->conf.Attributes & CONF_ENABLE_IRQ)
-        printk(", irq %d", link->irq.AssignedIRQ);
+	    printk(", irq %d", link->irq);
     if (link->io.NumPorts1)
         printk(", io 0x%04x-0x%04x", link->io.BasePort1,
                link->io.BasePort1+link->io.NumPorts1-1);
@@ -243,7 +203,7 @@ static int __devinit teles_cs_config(struct pcmcia_device *link)
                link->io.BasePort2+link->io.NumPorts2-1);
     printk("\n");
 
-    icard.para[0] = link->irq.AssignedIRQ;
+    icard.para[0] = link->irq;
     icard.para[1] = link->io.BasePort1;
     icard.protocol = protocol;
     icard.typ = ISDN_CTYPE_TELESPCMCIA;