Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 260 insertions, 0 deletions

diff --git a/drivers/isdn/sc/interrupt.c b/drivers/isdn/sc/interrupt.c
new file mode 100644
index 00000000000..e5e164aca7f
--- /dev/null
+++ b/drivers/isdn/sc/interrupt.c
@@ -0,0 +1,260 @@
+/* $Id: interrupt.c,v 1.4.8.3 2001/09/23 22:24:59 kai Exp $
+ *
+ * Copyright (C) 1996  SpellCaster Telecommunications Inc.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ * For more information, please contact gpl-info@spellcast.com or write:
+ *
+ *     SpellCaster Telecommunications Inc.
+ *     5621 Finch Avenue East, Unit #3
+ *     Scarborough, Ontario  Canada
+ *     M1B 2T9
+ *     +1 (416) 297-8565
+ *     +1 (416) 297-6433 Facsimile
+ */
+
+#include "includes.h"
+#include "hardware.h"
+#include "message.h"
+#include "card.h"
+#include <linux/interrupt.h>
+
+extern int indicate_status(int, int, ulong, char *);
+extern void check_phystat(unsigned long);
+extern int receivemessage(int, RspMessage *);
+extern int sendmessage(int, unsigned int, unsigned int, unsigned int,
+        unsigned int, unsigned int, unsigned int, unsigned int *);
+extern void rcvpkt(int, RspMessage *);
+
+extern int cinst;
+extern board *sc_adapter[];
+
+int get_card_from_irq(int irq)
+{
+	int i;
+
+	for(i = 0 ; i < cinst ; i++) {
+		if(sc_adapter[i]->interrupt == irq)
+			return i;
+	}
+	return -1;
+}
+
+/*
+ * 
+ */
+irqreturn_t interrupt_handler(int interrupt, void *cardptr, struct pt_regs *regs)
+{
+
+	RspMessage rcvmsg;
+	int channel;
+	int card;
+
+	card = get_card_from_irq(interrupt);
+
+	if(!IS_VALID_CARD(card)) {
+		pr_debug("Invalid param: %d is not a valid card id\n", card);
+		return IRQ_NONE;
+	}
+
+	pr_debug("%s: Entered Interrupt handler\n",
+			sc_adapter[card]->devicename);
+	
+ 	/*
+	 * Pull all of the waiting messages off the response queue
+	 */
+	while (!receivemessage(card, &rcvmsg)) {
+		/*
+		 * Push the message to the adapter structure for
+		 * send_and_receive to snoop
+		 */
+		if(sc_adapter[card]->want_async_messages)
+			memcpy(&(sc_adapter[card]->async_msg),
+					&rcvmsg, sizeof(RspMessage));
+
+		channel = (unsigned int) rcvmsg.phy_link_no;
+		
+		/*
+		 * Trap Invalid request messages
+		 */
+		if(IS_CM_MESSAGE(rcvmsg, 0, 0, Invalid)) {
+			pr_debug("%s: Invalid request Message, rsp_status = %d\n", 
+				sc_adapter[card]->devicename,
+				rcvmsg.rsp_status);
+			break;	
+		}
+		
+		/*
+		 * Check for a linkRead message
+		 */
+		if (IS_CE_MESSAGE(rcvmsg, Lnk, 1, Read))
+		{
+			pr_debug("%s: Received packet 0x%x bytes long at 0x%x\n",
+						sc_adapter[card]->devicename,
+						rcvmsg.msg_data.response.msg_len,
+						rcvmsg.msg_data.response.buff_offset);
+			rcvpkt(card, &rcvmsg);
+			continue;
+
+		}
+
+		/*
+		 * Handle a write acknoledgement
+		 */
+		if(IS_CE_MESSAGE(rcvmsg, Lnk, 1, Write)) {
+			pr_debug("%s: Packet Send ACK on channel %d\n",
+				sc_adapter[card]->devicename,
+				rcvmsg.phy_link_no);
+			sc_adapter[card]->channel[rcvmsg.phy_link_no-1].free_sendbufs++;
+			continue;
+		}
+
+		/*
+		 * Handle a connection message
+		 */
+		if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Connect)) 
+		{
+			unsigned int callid;
+			setup_parm setup;	
+			pr_debug("%s: Connect message: line %d: status %d: cause 0x%x\n",
+						sc_adapter[card]->devicename,
+						rcvmsg.phy_link_no,
+						rcvmsg.rsp_status,
+						rcvmsg.msg_data.byte_array[2]);
+			
+			memcpy(&callid,rcvmsg.msg_data.byte_array,sizeof(int));
+			if(callid>=0x8000 && callid<=0xFFFF)
+			{		
+				pr_debug("%s: Got Dial-Out Rsp\n",
+					sc_adapter[card]->devicename);
+				indicate_status(card, ISDN_STAT_DCONN,
+						(unsigned long)rcvmsg.phy_link_no-1,NULL);
+				
+			}
+			else if(callid>=0x0000 && callid<=0x7FFF)
+			{
+				pr_debug("%s: Got Incoming Call\n",
+						sc_adapter[card]->devicename);
+				strcpy(setup.phone,&(rcvmsg.msg_data.byte_array[4]));
+				strcpy(setup.eazmsn,
+					sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn);
+				setup.si1 = 7;
+				setup.si2 = 0;
+				setup.plan = 0;
+				setup.screen = 0;
+
+				indicate_status(card, ISDN_STAT_ICALL,(unsigned long)rcvmsg.phy_link_no-1,(char *)&setup);
+				indicate_status(card, ISDN_STAT_DCONN,(unsigned long)rcvmsg.phy_link_no-1,NULL);
+			}
+			continue;
+		}
+
+		/*
+		 * Handle a disconnection message
+		 */
+		if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Disconnect)) 
+		{
+			pr_debug("%s: disconnect message: line %d: status %d: cause 0x%x\n",
+						sc_adapter[card]->devicename,
+						rcvmsg.phy_link_no,
+						rcvmsg.rsp_status,
+					 	rcvmsg.msg_data.byte_array[2]);
+
+			indicate_status(card, ISDN_STAT_BHUP,(unsigned long)rcvmsg.phy_link_no-1,NULL);
+			indicate_status(card, ISDN_STAT_DHUP,(unsigned long)rcvmsg.phy_link_no-1,NULL);
+			continue;
+
+		}
+
+		/*
+		 * Handle a startProc engine up message
+		 */
+		if (IS_CM_MESSAGE(rcvmsg, 5, 0, MiscEngineUp)) {
+			pr_debug("%s: Received EngineUp message\n",
+				sc_adapter[card]->devicename);
+			sc_adapter[card]->EngineUp = 1;
+			sendmessage(card, CEPID,ceReqTypeCall,ceReqClass0,ceReqCallGetMyNumber,1,0,NULL);
+			sendmessage(card, CEPID,ceReqTypeCall,ceReqClass0,ceReqCallGetMyNumber,2,0,NULL);
+			init_timer(&sc_adapter[card]->stat_timer);
+			sc_adapter[card]->stat_timer.function = check_phystat;
+			sc_adapter[card]->stat_timer.data = card;
+			sc_adapter[card]->stat_timer.expires = jiffies + CHECKSTAT_TIME;
+			add_timer(&sc_adapter[card]->stat_timer);
+			continue;
+		}
+
+		/*
+		 * Start proc response
+		 */
+		if (IS_CM_MESSAGE(rcvmsg, 2, 0, StartProc)) {
+			pr_debug("%s: StartProc Response Status %d\n",
+				sc_adapter[card]->devicename,
+				rcvmsg.rsp_status);
+			continue;
+		}
+
+		/*
+		 * Handle a GetMyNumber Rsp
+		 */
+		if (IS_CE_MESSAGE(rcvmsg,Call,0,GetMyNumber)){
+			strcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn,rcvmsg.msg_data.byte_array);
+			continue;
+		}
+			
+		/*
+		 * PhyStatus response
+		 */
+		if(IS_CE_MESSAGE(rcvmsg, Phy, 2, Status)) {
+			unsigned int b1stat, b2stat;
+
+			/*
+			 * Covert the message data to the adapter->phystat code
+			 */
+			b1stat = (unsigned int) rcvmsg.msg_data.byte_array[0];
+			b2stat = (unsigned int) rcvmsg.msg_data.byte_array[1];
+
+			sc_adapter[card]->nphystat = (b2stat >> 8) | b1stat; /* endian?? */
+			pr_debug("%s: PhyStat is 0x%2x\n",
+				sc_adapter[card]->devicename,
+				sc_adapter[card]->nphystat);
+			continue;
+		}
+
+
+		/* 
+		 * Handle a GetFramFormat
+		 */
+		if(IS_CE_MESSAGE(rcvmsg, Call, 0, GetFrameFormat)) {
+			if(rcvmsg.msg_data.byte_array[0] != HDLC_PROTO) {
+				unsigned int proto = HDLC_PROTO;
+				/*
+				 * Set board format to HDLC if it wasn't already
+				 */
+				pr_debug("%s: current frame format: 0x%x, will change to HDLC\n",
+						sc_adapter[card]->devicename,
+					rcvmsg.msg_data.byte_array[0]);
+				sendmessage(card, CEPID, ceReqTypeCall,
+						ceReqClass0,
+						ceReqCallSetFrameFormat,
+						(unsigned char) channel +1,
+						1,&proto);
+				}
+			continue;
+		}
+
+		/*
+		 * Hmm...
+		 */
+		pr_debug("%s: Received unhandled message (%d,%d,%d) link %d\n",
+			sc_adapter[card]->devicename,
+			rcvmsg.type, rcvmsg.class, rcvmsg.code,
+			rcvmsg.phy_link_no);
+
+	}	/* while */
+
+	pr_debug("%s: Exiting Interrupt Handler\n",
+			sc_adapter[card]->devicename);
+	return IRQ_HANDLED;
+}