Merge branch 'next' into for-linus

38 files changed, 1404 insertions, 413 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index ff203a42186..9ca28fced2b 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -347,7 +347,8 @@ config LEDS_MC13783
 config LEDS_NS2
 	tristate "LED support for Network Space v2 GPIO LEDs"
 	depends on LEDS_CLASS
-	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2
+	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \
+		   MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2
 	default y
 	help
 	  This option enable support for the dual-GPIO LED found on the
@@ -387,6 +388,28 @@ config LEDS_RENESAS_TPU
 	  pin function. The latter to support brightness control.
 	  Brightness control is supported but hardware blinking is not.
 
+config LEDS_TCA6507
+	tristate "LED Support for TCA6507 I2C chip"
+	depends on LEDS_CLASS && I2C
+	help
+	  This option enables support for LEDs connected to TC6507
+	  LED driver chips accessed via the I2C bus.
+	  Driver support brightness control and hardware-assisted blinking.
+
+config LEDS_MAX8997
+	tristate "LED support for MAX8997 PMIC"
+	depends on LEDS_CLASS && MFD_MAX8997
+	help
+	  This option enables support for on-chip LED drivers on
+	  MAXIM MAX8997 PMIC.
+
+config LEDS_OT200
+	tristate "LED support for the Bachmann OT200"
+	depends on LEDS_CLASS && HAS_IOMEM
+	help
+	  This option enables support for the LEDs on the Bachmann OT200.
+	  Say Y to enable LEDs on the Bachmann OT200.
+
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
 	depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index e4f6bf56888..1fc6875a8b2 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -25,8 +25,10 @@ obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
 obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
 obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
+obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
+obj-$(CONFIG_LEDS_OT200)		+= leds-ot200.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
 obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
 obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
@@ -43,6 +45,7 @@ obj-$(CONFIG_LEDS_NS2)			+= leds-ns2.o
 obj-$(CONFIG_LEDS_NETXBIG)		+= leds-netxbig.o
 obj-$(CONFIG_LEDS_ASIC3)		+= leds-asic3.o
 obj-$(CONFIG_LEDS_RENESAS_TPU)		+= leds-renesas-tpu.o
+obj-$(CONFIG_LEDS_MAX8997)		+= leds-max8997.o
 
 # LED SPI Drivers
 obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 6d5628bb060..0c8739c448b 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -15,7 +15,6 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
 #include <linux/timer.h>
 #include <linux/err.h>
 #include <linux/ctype.h>
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index 6f1ff93d7ce..46b4c766335 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -17,7 +17,6 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
 #include <linux/timer.h>
 #include <linux/rwsem.h>
 #include <linux/leds.h>
diff --git a/drivers/leds/leds-88pm860x.c b/drivers/leds/leds-88pm860x.c
index 0810604dc70..4ca00624bd1 100644
--- a/drivers/leds/leds-88pm860x.c
+++ b/drivers/leds/leds-88pm860x.c
@@ -238,17 +238,7 @@ static struct platform_driver pm860x_led_driver = {
 	.remove	= pm860x_led_remove,
 };
 
-static int __devinit pm860x_led_init(void)
-{
-	return platform_driver_register(&pm860x_led_driver);
-}
-module_init(pm860x_led_init);
-
-static void __devexit pm860x_led_exit(void)
-{
-	platform_driver_unregister(&pm860x_led_driver);
-}
-module_exit(pm860x_led_exit);
+module_platform_driver(pm860x_led_driver);
 
 MODULE_DESCRIPTION("LED driver for Marvell PM860x");
 MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
diff --git a/drivers/leds/leds-adp5520.c b/drivers/leds/leds-adp5520.c
index 7ba4c7b5b97..b1400db3f83 100644
--- a/drivers/leds/leds-adp5520.c
+++ b/drivers/leds/leds-adp5520.c
@@ -213,17 +213,7 @@ static struct platform_driver adp5520_led_driver = {
 	.remove		= __devexit_p(adp5520_led_remove),
 };
 
-static int __init adp5520_led_init(void)
-{
-	return platform_driver_register(&adp5520_led_driver);
-}
-module_init(adp5520_led_init);
-
-static void __exit adp5520_led_exit(void)
-{
-	platform_driver_unregister(&adp5520_led_driver);
-}
-module_exit(adp5520_led_exit);
+module_platform_driver(adp5520_led_driver);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("LEDS ADP5520(01) Driver");
diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c
index 8c00937bf7e..07428357c83 100644
--- a/drivers/leds/leds-ams-delta.c
+++ b/drivers/leds/leds-ams-delta.c
@@ -118,18 +118,7 @@ static struct platform_driver ams_delta_led_driver = {
 	},
 };
 
-static int __init ams_delta_led_init(void)
-{
-	return platform_driver_register(&ams_delta_led_driver);
-}
-
-static void __exit ams_delta_led_exit(void)
-{
-	platform_driver_unregister(&ams_delta_led_driver);
-}
-
-module_init(ams_delta_led_init);
-module_exit(ams_delta_led_exit);
+module_platform_driver(ams_delta_led_driver);
 
 MODULE_AUTHOR("Jonathan McDowell <noodles@earth.li>");
 MODULE_DESCRIPTION("Amstrad Delta LED driver");
diff --git a/drivers/leds/leds-asic3.c b/drivers/leds/leds-asic3.c
index 48d9fe61bdf..525a9249283 100644
--- a/drivers/leds/leds-asic3.c
+++ b/drivers/leds/leds-asic3.c
@@ -179,21 +179,9 @@ static struct platform_driver asic3_led_driver = {
 	},
 };
 
-MODULE_ALIAS("platform:leds-asic3");
-
-static int __init asic3_led_init(void)
-{
-	return platform_driver_register(&asic3_led_driver);
-}
-
-static void __exit asic3_led_exit(void)
-{
-	platform_driver_unregister(&asic3_led_driver);
-}
-
-module_init(asic3_led_init);
-module_exit(asic3_led_exit);
+module_platform_driver(asic3_led_driver);
 
 MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>");
 MODULE_DESCRIPTION("HTC ASIC3 LED driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-asic3");
diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
index 109c875ea23..800243b6037 100644
--- a/drivers/leds/leds-atmel-pwm.c
+++ b/drivers/leds/leds-atmel-pwm.c
@@ -134,29 +134,18 @@ static int __exit pwmled_remove(struct platform_device *pdev)
 	return 0;
 }
 
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:leds-atmel-pwm");
-
 static struct platform_driver pwmled_driver = {
 	.driver = {
 		.name =		"leds-atmel-pwm",
 		.owner =	THIS_MODULE,
 	},
 	/* REVISIT add suspend() and resume() methods */
+	.probe =	pwmled_probe,
 	.remove =	__exit_p(pwmled_remove),
 };
 
-static int __init modinit(void)
-{
-	return platform_driver_probe(&pwmled_driver, pwmled_probe);
-}
-module_init(modinit);
-
-static void __exit modexit(void)
-{
-	platform_driver_unregister(&pwmled_driver);
-}
-module_exit(modexit);
+module_platform_driver(pwmled_driver);
 
 MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-atmel-pwm");
diff --git a/drivers/leds/leds-bd2802.c b/drivers/leds/leds-bd2802.c
index ea2185531f8..591cbdf5a04 100644
--- a/drivers/leds/leds-bd2802.c
+++ b/drivers/leds/leds-bd2802.c
@@ -688,8 +688,7 @@ static int __devinit bd2802_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, led);
 
 	/* Configure RESET GPIO (L: RESET, H: RESET cancel) */
-	gpio_request(pdata->reset_gpio, "RGB_RESETB");
-	gpio_direction_output(pdata->reset_gpio, 1);
+	gpio_request_one(pdata->reset_gpio, GPIOF_OUT_INIT_HIGH, "RGB_RESETB");
 
 	/* Tacss = min 0.1ms */
 	udelay(100);
@@ -813,17 +812,7 @@ static struct i2c_driver bd2802_i2c_driver = {
 	.id_table	= bd2802_id,
 };
 
-static int __init bd2802_init(void)
-{
-	return i2c_add_driver(&bd2802_i2c_driver);
-}
-module_init(bd2802_init);
-
-static void __exit bd2802_exit(void)
-{
-	i2c_del_driver(&bd2802_i2c_driver);
-}
-module_exit(bd2802_exit);
+module_i2c_driver(bd2802_i2c_driver);
 
 MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
 MODULE_DESCRIPTION("BD2802 LED driver");
diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c
index a498135a4e8..1ed1677c916 100644
--- a/drivers/leds/leds-clevo-mail.c
+++ b/drivers/leds/leds-clevo-mail.c
@@ -18,7 +18,7 @@ MODULE_AUTHOR("Márton Németh <nm127@freemail.hu>");
 MODULE_DESCRIPTION("Clevo mail LED driver");
 MODULE_LICENSE("GPL");
 
-static unsigned int __initdata nodetect;
+static bool __initdata nodetect;
 module_param_named(nodetect, nodetect, bool, 0);
 MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection");
 
diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c
index da5fb016b1a..6a8725cc7b4 100644
--- a/drivers/leds/leds-cobalt-qube.c
+++ b/drivers/leds/leds-cobalt-qube.c
@@ -75,9 +75,6 @@ static int __devexit cobalt_qube_led_remove(struct platform_device *pdev)
 	return 0;
 }
 
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:cobalt-qube-leds");
-
 static struct platform_driver cobalt_qube_led_driver = {
 	.probe	= cobalt_qube_led_probe,
 	.remove	= __devexit_p(cobalt_qube_led_remove),
@@ -87,19 +84,9 @@ static struct platform_driver cobalt_qube_led_driver = {
 	},
 };
 
-static int __init cobalt_qube_led_init(void)
-{
-	return platform_driver_register(&cobalt_qube_led_driver);
-}
-
-static void __exit cobalt_qube_led_exit(void)
-{
-	platform_driver_unregister(&cobalt_qube_led_driver);
-}
-
-module_init(cobalt_qube_led_init);
-module_exit(cobalt_qube_led_exit);
+module_platform_driver(cobalt_qube_led_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Front LED support for Cobalt Server");
 MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_ALIAS("platform:cobalt-qube-leds");
diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c
index f28931cf678..d9cd73ebd6c 100644
--- a/drivers/leds/leds-da903x.c
+++ b/drivers/leds/leds-da903x.c
@@ -158,17 +158,7 @@ static struct platform_driver da903x_led_driver = {
 	.remove		= __devexit_p(da903x_led_remove),
 };
 
-static int __init da903x_led_init(void)
-{
-	return platform_driver_register(&da903x_led_driver);
-}
-module_init(da903x_led_init);
-
-static void __exit da903x_led_exit(void)
-{
-	platform_driver_unregister(&da903x_led_driver);
-}
-module_exit(da903x_led_exit);
+module_platform_driver(da903x_led_driver);
 
 MODULE_DESCRIPTION("LEDs driver for Dialog Semiconductor DA9030/DA9034");
 MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
diff --git a/drivers/leds/leds-dac124s085.c b/drivers/leds/leds-dac124s085.c
index 31cf0d60a9a..d56c14269ff 100644
--- a/drivers/leds/leds-dac124s085.c
+++ b/drivers/leds/leds-dac124s085.c
@@ -131,18 +131,7 @@ static struct spi_driver dac124s085_driver = {
 	},
 };
 
-static int __init dac124s085_leds_init(void)
-{
-	return spi_register_driver(&dac124s085_driver);
-}
-
-static void __exit dac124s085_leds_exit(void)
-{
-	spi_unregister_driver(&dac124s085_driver);
-}
-
-module_init(dac124s085_leds_init);
-module_exit(dac124s085_leds_exit);
+module_spi_driver(dac124s085_driver);
 
 MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>");
 MODULE_DESCRIPTION("DAC124S085 LED driver");
diff --git a/drivers/leds/leds-fsg.c b/drivers/leds/leds-fsg.c
index 49aceffaa5b..b9053fa6e25 100644
--- a/drivers/leds/leds-fsg.c
+++ b/drivers/leds/leds-fsg.c
@@ -224,20 +224,7 @@ static struct platform_driver fsg_led_driver = {
 	},
 };
 
-
-static int __init fsg_led_init(void)
-{
-	return platform_driver_register(&fsg_led_driver);
-}
-
-static void __exit fsg_led_exit(void)
-{
-	platform_driver_unregister(&fsg_led_driver);
-}
-
-
-module_init(fsg_led_init);
-module_exit(fsg_led_exit);
+module_platform_driver(fsg_led_driver);
 
 MODULE_AUTHOR("Rod Whitby <rod@whitby.id.au>");
 MODULE_DESCRIPTION("Freecom FSG-3 LED driver");
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 399a86f2013..7df74cb97e7 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -293,21 +293,9 @@ static struct platform_driver gpio_led_driver = {
 	},
 };
 
-MODULE_ALIAS("platform:leds-gpio");
-
-static int __init gpio_led_init(void)
-{
-	return platform_driver_register(&gpio_led_driver);
-}
-
-static void __exit gpio_led_exit(void)
-{
-	platform_driver_unregister(&gpio_led_driver);
-}
-
-module_init(gpio_led_init);
-module_exit(gpio_led_exit);
+module_platform_driver(gpio_led_driver);
 
 MODULE_AUTHOR("Raphael Assenat <raph@8d.com>, Trent Piepho <tpiepho@freescale.com>");
 MODULE_DESCRIPTION("GPIO LED driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-gpio");
diff --git a/drivers/leds/leds-hp6xx.c b/drivers/leds/leds-hp6xx.c
index bcfbd3a60ea..366b6055e33 100644
--- a/drivers/leds/leds-hp6xx.c
+++ b/drivers/leds/leds-hp6xx.c
@@ -79,9 +79,6 @@ static int hp6xxled_remove(struct platform_device *pdev)
 	return 0;
 }
 
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:hp6xx-led");
-
 static struct platform_driver hp6xxled_driver = {
 	.probe		= hp6xxled_probe,
 	.remove		= hp6xxled_remove,
@@ -91,19 +88,9 @@ static struct platform_driver hp6xxled_driver = {
 	},
 };
 
-static int __init hp6xxled_init(void)
-{
-	return platform_driver_register(&hp6xxled_driver);
-}
-
-static void __exit hp6xxled_exit(void)
-{
-	platform_driver_unregister(&hp6xxled_driver);
-}
-
-module_init(hp6xxled_init);
-module_exit(hp6xxled_exit);
+module_platform_driver(hp6xxled_driver);
 
 MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
 MODULE_DESCRIPTION("HP Jornada 6xx LED driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:hp6xx-led");
diff --git a/drivers/leds/leds-lm3530.c b/drivers/leds/leds-lm3530.c
index 0630e4f4b28..e59c166a0ce 100644
--- a/drivers/leds/leds-lm3530.c
+++ b/drivers/leds/leds-lm3530.c
@@ -164,8 +164,8 @@ static int lm3530_init_registers(struct lm3530_data *drvdata)
 
 	if (drvdata->mode == LM3530_BL_MODE_ALS) {
 		if (pltfm->als_vmax == 0) {
-			pltfm->als_vmin = als_vmin = 0;
-			pltfm->als_vmin = als_vmax = LM3530_ALS_WINDOW_mV;
+			pltfm->als_vmin = 0;
+			pltfm->als_vmax = LM3530_ALS_WINDOW_mV;
 		}
 
 		als_vmin = pltfm->als_vmin;
@@ -457,18 +457,7 @@ static struct i2c_driver lm3530_i2c_driver = {
 	},
 };
 
-static int __init lm3530_init(void)
-{
-	return i2c_add_driver(&lm3530_i2c_driver);
-}
-
-static void __exit lm3530_exit(void)
-{
-	i2c_del_driver(&lm3530_i2c_driver);
-}
-
-module_init(lm3530_init);
-module_exit(lm3530_exit);
+module_i2c_driver(lm3530_i2c_driver);
 
 MODULE_DESCRIPTION("Back Light driver for LM3530");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-lp3944.c b/drivers/leds/leds-lp3944.c
index 9010c054615..b8f9f0a5d43 100644
--- a/drivers/leds/leds-lp3944.c
+++ b/drivers/leds/leds-lp3944.c
@@ -453,18 +453,7 @@ static struct i2c_driver lp3944_driver = {
 	.id_table = lp3944_id,
 };
 
-static int __init lp3944_module_init(void)
-{
-	return i2c_add_driver(&lp3944_driver);
-}
-
-static void __exit lp3944_module_exit(void)
-{
-	i2c_del_driver(&lp3944_driver);
-}
-
-module_init(lp3944_module_init);
-module_exit(lp3944_module_exit);
+module_i2c_driver(lp3944_driver);
 
 MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
 MODULE_DESCRIPTION("LP3944 Fun Light Chip");
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index cb641f1b334..d62a7982a5e 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -797,25 +797,7 @@ static struct i2c_driver lp5521_driver = {
 	.id_table	= lp5521_id,
 };
 
-static int __init lp5521_init(void)
-{
-	int ret;
-
-	ret = i2c_add_driver(&lp5521_driver);
-
-	if (ret < 0)
-		printk(KERN_ALERT "Adding lp5521 driver failed\n");
-
-	return ret;
-}
-
-static void __exit lp5521_exit(void)
-{
-	i2c_del_driver(&lp5521_driver);
-}
-
-module_init(lp5521_init);
-module_exit(lp5521_exit);
+module_i2c_driver(lp5521_driver);
 
 MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo");
 MODULE_DESCRIPTION("LP5521 LED engine");
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index 5971e309b23..73e791ae725 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -870,8 +870,6 @@ static int __devinit lp5523_init_led(struct lp5523_led *led, struct device *dev,
 	return 0;
 }
 
-static struct i2c_driver lp5523_driver;
-
 static int __devinit lp5523_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
@@ -1021,25 +1019,7 @@ static struct i2c_driver lp5523_driver = {
 	.id_table	= lp5523_id,
 };
 
-static int __init lp5523_init(void)
-{
-	int ret;
-
-	ret = i2c_add_driver(&lp5523_driver);
-
-	if (ret < 0)
-		printk(KERN_ALERT "Adding lp5523 driver failed\n");
-
-	return ret;
-}
-
-static void __exit lp5523_exit(void)
-{
-	i2c_del_driver(&lp5523_driver);
-}
-
-module_init(lp5523_init);
-module_exit(lp5523_exit);
+module_i2c_driver(lp5523_driver);
 
 MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
 MODULE_DESCRIPTION("LP5523 LED engine");
diff --git a/drivers/leds/leds-lt3593.c b/drivers/leds/leds-lt3593.c
index 53f67b8ce55..e311a96c446 100644
--- a/drivers/leds/leds-lt3593.c
+++ b/drivers/leds/leds-lt3593.c
@@ -199,21 +199,9 @@ static struct platform_driver lt3593_led_driver = {
 	},
 };
 
-MODULE_ALIAS("platform:leds-lt3593");
-
-static int __init lt3593_led_init(void)
-{
-	return platform_driver_register(&lt3593_led_driver);
-}
-
-static void __exit lt3593_led_exit(void)
-{
-	platform_driver_unregister(&lt3593_led_driver);
-}
-
-module_init(lt3593_led_init);
-module_exit(lt3593_led_exit);
+module_platform_driver(lt3593_led_driver);
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
 MODULE_DESCRIPTION("LED driver for LT3593 controllers");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-lt3593");
diff --git a/drivers/leds/leds-max8997.c b/drivers/leds/leds-max8997.c
new file mode 100644
index 00000000000..f4c0e37fad1
--- /dev/null
+++ b/drivers/leds/leds-max8997.c
@@ -0,0 +1,372 @@
+/*
+ * leds-max8997.c - LED class driver for MAX8997 LEDs.
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * Donggeun Kim <dg77.kim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/leds.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mfd/max8997-private.h>
+#include <linux/platform_device.h>
+
+#define MAX8997_LED_FLASH_SHIFT			3
+#define MAX8997_LED_FLASH_CUR_MASK		0xf8
+#define MAX8997_LED_MOVIE_SHIFT			4
+#define MAX8997_LED_MOVIE_CUR_MASK		0xf0
+
+#define MAX8997_LED_FLASH_MAX_BRIGHTNESS	0x1f
+#define MAX8997_LED_MOVIE_MAX_BRIGHTNESS	0xf
+#define MAX8997_LED_NONE_MAX_BRIGHTNESS		0
+
+#define MAX8997_LED0_FLASH_MASK			0x1
+#define MAX8997_LED0_FLASH_PIN_MASK		0x5
+#define MAX8997_LED0_MOVIE_MASK			0x8
+#define MAX8997_LED0_MOVIE_PIN_MASK		0x28
+
+#define MAX8997_LED1_FLASH_MASK			0x2
+#define MAX8997_LED1_FLASH_PIN_MASK		0x6
+#define MAX8997_LED1_MOVIE_MASK			0x10
+#define MAX8997_LED1_MOVIE_PIN_MASK		0x30
+
+#define MAX8997_LED_BOOST_ENABLE_MASK		(1 << 6)
+
+struct max8997_led {
+	struct max8997_dev *iodev;
+	struct led_classdev cdev;
+	bool enabled;
+	int id;
+	enum max8997_led_mode led_mode;
+	struct mutex mutex;
+};
+
+static void max8997_led_clear_mode(struct max8997_led *led,
+			enum max8997_led_mode mode)
+{
+	struct i2c_client *client = led->iodev->i2c;
+	u8 val = 0, mask = 0;
+	int ret;
+
+	switch (mode) {
+	case MAX8997_FLASH_MODE:
+		mask = led->id ?
+		      MAX8997_LED1_FLASH_MASK : MAX8997_LED0_FLASH_MASK;
+		break;
+	case MAX8997_MOVIE_MODE:
+		mask = led->id ?
+		      MAX8997_LED1_MOVIE_MASK : MAX8997_LED0_MOVIE_MASK;
+		break;
+	case MAX8997_FLASH_PIN_CONTROL_MODE:
+		mask = led->id ?
+		      MAX8997_LED1_FLASH_PIN_MASK : MAX8997_LED0_FLASH_PIN_MASK;
+		break;
+	case MAX8997_MOVIE_PIN_CONTROL_MODE:
+		mask = led->id ?
+		      MAX8997_LED1_MOVIE_PIN_MASK : MAX8997_LED0_MOVIE_PIN_MASK;
+		break;
+	default:
+		break;
+	}
+
+	if (mask) {
+		ret = max8997_update_reg(client,
+				MAX8997_REG_LEN_CNTL, val, mask);
+		if (ret)
+			dev_err(led->iodev->dev,
+				"failed to update register(%d)\n", ret);
+	}
+}
+
+static void max8997_led_set_mode(struct max8997_led *led,
+			enum max8997_led_mode mode)
+{
+	int ret;
+	struct i2c_client *client = led->iodev->i2c;
+	u8 mask = 0;
+
+	/* First, clear the previous mode */
+	max8997_led_clear_mode(led, led->led_mode);
+
+	switch (mode) {
+	case MAX8997_FLASH_MODE:
+		mask = led->id ?
+		      MAX8997_LED1_FLASH_MASK : MAX8997_LED0_FLASH_MASK;
+		led->cdev.max_brightness = MAX8997_LED_FLASH_MAX_BRIGHTNESS;
+		break;
+	case MAX8997_MOVIE_MODE:
+		mask = led->id ?
+		      MAX8997_LED1_MOVIE_MASK : MAX8997_LED0_MOVIE_MASK;
+		led->cdev.max_brightness = MAX8997_LED_MOVIE_MAX_BRIGHTNESS;
+		break;
+	case MAX8997_FLASH_PIN_CONTROL_MODE:
+		mask = led->id ?
+		      MAX8997_LED1_FLASH_PIN_MASK : MAX8997_LED0_FLASH_PIN_MASK;
+		led->cdev.max_brightness = MAX8997_LED_FLASH_MAX_BRIGHTNESS;
+		break;
+	case MAX8997_MOVIE_PIN_CONTROL_MODE:
+		mask = led->id ?
+		      MAX8997_LED1_MOVIE_PIN_MASK : MAX8997_LED0_MOVIE_PIN_MASK;
+		led->cdev.max_brightness = MAX8997_LED_MOVIE_MAX_BRIGHTNESS;
+		break;
+	default:
+		led->cdev.max_brightness = MAX8997_LED_NONE_MAX_BRIGHTNESS;
+		break;
+	}
+
+	if (mask) {
+		ret = max8997_update_reg(client,
+				MAX8997_REG_LEN_CNTL, mask, mask);
+		if (ret)
+			dev_err(led->iodev->dev,
+				"failed to update register(%d)\n", ret);
+	}
+
+	led->led_mode = mode;
+}
+
+static void max8997_led_enable(struct max8997_led *led, bool enable)
+{
+	int ret;
+	struct i2c_client *client = led->iodev->i2c;
+	u8 val = 0, mask = MAX8997_LED_BOOST_ENABLE_MASK;
+
+	if (led->enabled == enable)
+		return;
+
+	val = enable ? MAX8997_LED_BOOST_ENABLE_MASK : 0;
+
+	ret = max8997_update_reg(client, MAX8997_REG_BOOST_CNTL, val, mask);
+	if (ret)
+		dev_err(led->iodev->dev,
+			"failed to update register(%d)\n", ret);
+
+	led->enabled = enable;
+}
+
+static void max8997_led_set_current(struct max8997_led *led,
+				enum led_brightness value)
+{
+	int ret;
+	struct i2c_client *client = led->iodev->i2c;
+	u8 val = 0, mask = 0, reg = 0;
+
+	switch (led->led_mode) {
+	case MAX8997_FLASH_MODE:
+	case MAX8997_FLASH_PIN_CONTROL_MODE:
+		val = value << MAX8997_LED_FLASH_SHIFT;
+		mask = MAX8997_LED_FLASH_CUR_MASK;
+		reg = led->id ? MAX8997_REG_FLASH2_CUR : MAX8997_REG_FLASH1_CUR;
+		break;
+	case MAX8997_MOVIE_MODE:
+	case MAX8997_MOVIE_PIN_CONTROL_MODE:
+		val = value << MAX8997_LED_MOVIE_SHIFT;
+		mask = MAX8997_LED_MOVIE_CUR_MASK;
+		reg = MAX8997_REG_MOVIE_CUR;
+		break;
+	default:
+		break;
+	}
+
+	if (mask) {
+		ret = max8997_update_reg(client, reg, val, mask);
+		if (ret)
+			dev_err(led->iodev->dev,
+				"failed to update register(%d)\n", ret);
+	}
+}
+
+static void max8997_led_brightness_set(struct led_classdev *led_cdev,
+				enum led_brightness value)
+{
+	struct max8997_led *led =
+			container_of(led_cdev, struct max8997_led, cdev);
+
+	if (value) {
+		max8997_led_set_current(led, value);
+		max8997_led_enable(led, true);
+	} else {
+		max8997_led_set_current(led, value);
+		max8997_led_enable(led, false);
+	}
+}
+
+static ssize_t max8997_led_show_mode(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct max8997_led *led =
+			container_of(led_cdev, struct max8997_led, cdev);
+	ssize_t ret = 0;
+
+	mutex_lock(&led->mutex);
+
+	switch (led->led_mode) {
+	case MAX8997_FLASH_MODE:
+		ret += sprintf(buf, "FLASH\n");
+		break;
+	case MAX8997_MOVIE_MODE:
+		ret += sprintf(buf, "MOVIE\n");
+		break;
+	case MAX8997_FLASH_PIN_CONTROL_MODE:
+		ret += sprintf(buf, "FLASH_PIN_CONTROL\n");
+		break;
+	case MAX8997_MOVIE_PIN_CONTROL_MODE:
+		ret += sprintf(buf, "MOVIE_PIN_CONTROL\n");
+		break;
+	default:
+		ret += sprintf(buf, "NONE\n");
+		break;
+	}
+
+	mutex_unlock(&led->mutex);
+
+	return ret;
+}
+
+static ssize_t max8997_led_store_mode(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct max8997_led *led =
+			container_of(led_cdev, struct max8997_led, cdev);
+	enum max8997_led_mode mode;
+
+	mutex_lock(&led->mutex);
+
+	if (!strncmp(buf, "FLASH_PIN_CONTROL", 17))
+		mode = MAX8997_FLASH_PIN_CONTROL_MODE;
+	else if (!strncmp(buf, "MOVIE_PIN_CONTROL", 17))
+		mode = MAX8997_MOVIE_PIN_CONTROL_MODE;
+	else if (!strncmp(buf, "FLASH", 5))
+		mode = MAX8997_FLASH_MODE;
+	else if (!strncmp(buf, "MOVIE", 5))
+		mode = MAX8997_MOVIE_MODE;
+	else
+		mode = MAX8997_NONE;
+
+	max8997_led_set_mode(led, mode);
+
+	mutex_unlock(&led->mutex);
+
+	return size;
+}
+
+static DEVICE_ATTR(mode, 0644, max8997_led_show_mode, max8997_led_store_mode);
+
+static int __devinit max8997_led_probe(struct platform_device *pdev)
+{
+	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+	struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct max8997_led *led;
+	char name[20];
+	int ret = 0;
+
+	if (pdata == NULL) {
+		dev_err(&pdev->dev, "no platform data\n");
+		return -ENODEV;
+	}
+
+	led = kzalloc(sizeof(*led), GFP_KERNEL);
+	if (led == NULL) {
+		ret = -ENOMEM;
+		goto err_mem;
+	}
+
+	led->id = pdev->id;
+	snprintf(name, sizeof(name), "max8997-led%d", pdev->id);
+
+	led->cdev.name = name;
+	led->cdev.brightness_set = max8997_led_brightness_set;
+	led->cdev.flags |= LED_CORE_SUSPENDRESUME;
+	led->cdev.brightness = 0;
+	led->iodev = iodev;
+
+	/* initialize mode and brightness according to platform_data */
+	if (pdata->led_pdata) {
+		u8 mode = 0, brightness = 0;
+
+		mode = pdata->led_pdata->mode[led->id];
+		brightness = pdata->led_pdata->brightness[led->id];
+
+		max8997_led_set_mode(led, pdata->led_pdata->mode[led->id]);
+
+		if (brightness > led->cdev.max_brightness)
+			brightness = led->cdev.max_brightness;
+		max8997_led_set_current(led, brightness);
+		led->cdev.brightness = brightness;
+	} else {
+		max8997_led_set_mode(led, MAX8997_NONE);
+		max8997_led_set_current(led, 0);
+	}
+
+	mutex_init(&led->mutex);
+
+	platform_set_drvdata(pdev, led);
+
+	ret = led_classdev_register(&pdev->dev, &led->cdev);
+	if (ret < 0)
+		goto err_led;
+
+	ret = device_create_file(led->cdev.dev, &dev_attr_mode);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"failed to create file: %d\n", ret);
+		goto err_file;
+	}
+
+	return 0;
+
+err_file:
+	led_classdev_unregister(&led->cdev);
+err_led:
+	kfree(led);
+err_mem:
+	return ret;
+}
+
+static int __devexit max8997_led_remove(struct platform_device *pdev)
+{
+	struct max8997_led *led = platform_get_drvdata(pdev);
+
+	device_remove_file(led->cdev.dev, &dev_attr_mode);
+	led_classdev_unregister(&led->cdev);
+	kfree(led);
+
+	return 0;
+}
+
+static struct platform_driver max8997_led_driver = {
+	.driver = {
+		.name  = "max8997-led",
+		.owner = THIS_MODULE,
+	},
+	.probe  = max8997_led_probe,
+	.remove = __devexit_p(max8997_led_remove),
+};
+
+static int __init max8997_led_init(void)
+{
+	return platform_driver_register(&max8997_led_driver);
+}
+module_init(max8997_led_init);
+
+static void __exit max8997_led_exit(void)
+{
+	platform_driver_unregister(&max8997_led_driver);
+}
+module_exit(max8997_led_exit);
+
+MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
+MODULE_DESCRIPTION("MAX8997 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:max8997-led");
diff --git a/drivers/leds/leds-mc13783.c b/drivers/leds/leds-mc13783.c
index b3393a9f213..8bc49154155 100644
--- a/drivers/leds/leds-mc13783.c
+++ b/drivers/leds/leds-mc13783.c
@@ -275,7 +275,7 @@ static int __devinit mc13783_led_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (pdata->num_leds < 1 || pdata->num_leds > MC13783_LED_MAX) {
+	if (pdata->num_leds < 1 || pdata->num_leds > (MC13783_LED_MAX + 1)) {
 		dev_err(&pdev->dev, "Invalid led count %d\n", pdata->num_leds);
 		return -EINVAL;
 	}
@@ -385,17 +385,7 @@ static struct platform_driver mc13783_led_driver = {
 	.remove		= __devexit_p(mc13783_led_remove),
 };
 
-static int __init mc13783_led_init(void)
-{
-	return platform_driver_register(&mc13783_led_driver);
-}
-module_init(mc13783_led_init);
-
-static void __exit mc13783_led_exit(void)
-{
-	platform_driver_unregister(&mc13783_led_driver);
-}
-module_exit(mc13783_led_exit);
+module_platform_driver(mc13783_led_driver);
 
 MODULE_DESCRIPTION("LEDs driver for Freescale MC13783 PMIC");
 MODULE_AUTHOR("Philippe Retornaz <philippe.retornaz@epfl.ch>");
diff --git a/drivers/leds/leds-netxbig.c b/drivers/leds/leds-netxbig.c
index f2e51c13439..d8433f2d53b 100644
--- a/drivers/leds/leds-netxbig.c
+++ b/drivers/leds/leds-netxbig.c
@@ -81,35 +81,23 @@ static int __devinit gpio_ext_init(struct netxbig_gpio_ext *gpio_ext)
 
 	/* Configure address GPIOs. */
 	for (i = 0; i < gpio_ext->num_addr; i++) {
-		err = gpio_request(gpio_ext->addr[i], "GPIO extension addr");
+		err = gpio_request_one(gpio_ext->addr[i], GPIOF_OUT_INIT_LOW,
+				       "GPIO extension addr");
 		if (err)
 			goto err_free_addr;
-		err = gpio_direction_output(gpio_ext->addr[i], 0);
-		if (err) {
-			gpio_free(gpio_ext->addr[i]);
-			goto err_free_addr;
-		}
 	}
 	/* Configure data GPIOs. */
 	for (i = 0; i < gpio_ext->num_data; i++) {
-		err = gpio_request(gpio_ext->data[i], "GPIO extension data");
+		err = gpio_request_one(gpio_ext->data[i], GPIOF_OUT_INIT_LOW,
+				   "GPIO extension data");
 		if (err)
 			goto err_free_data;
-		err = gpio_direction_output(gpio_ext->data[i], 0);
-		if (err) {
-			gpio_free(gpio_ext->data[i]);
-			goto err_free_data;
-		}
 	}
 	/* Configure "enable select" GPIO. */
-	err = gpio_request(gpio_ext->enable, "GPIO extension enable");
+	err = gpio_request_one(gpio_ext->enable, GPIOF_OUT_INIT_LOW,
+			       "GPIO extension enable");
 	if (err)
 		goto err_free_data;
-	err = gpio_direction_output(gpio_ext->enable, 0);
-	if (err) {
-		gpio_free(gpio_ext->enable);
-		goto err_free_data;
-	}
 
 	return 0;
 
@@ -429,21 +417,10 @@ static struct platform_driver netxbig_led_driver = {
 		.owner	= THIS_MODULE,
 	},
 };
-MODULE_ALIAS("platform:leds-netxbig");
 
-static int __init netxbig_led_init(void)
-{
-	return platform_driver_register(&netxbig_led_driver);
-}
-
-static void __exit netxbig_led_exit(void)
-{
-	platform_driver_unregister(&netxbig_led_driver);
-}
-
-module_init(netxbig_led_init);
-module_exit(netxbig_led_exit);
+module_platform_driver(netxbig_led_driver);
 
 MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
 MODULE_DESCRIPTION("LED driver for LaCie xBig Network boards");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-netxbig");
diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index 37b7d0cfe58..2f0a14421a7 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -323,21 +323,10 @@ static struct platform_driver ns2_led_driver = {
 		.owner	= THIS_MODULE,
 	},
 };
-MODULE_ALIAS("platform:leds-ns2");
-
-static int __init ns2_led_init(void)
-{
-	return platform_driver_register(&ns2_led_driver);
-}
 
-static void __exit ns2_led_exit(void)
-{
-	platform_driver_unregister(&ns2_led_driver);
-}
-
-module_init(ns2_led_init);
-module_exit(ns2_led_exit);
+module_platform_driver(ns2_led_driver);
 
 MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
 MODULE_DESCRIPTION("Network Space v2 LED driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-ns2");
diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c
new file mode 100644
index 00000000000..c4646825a62
--- /dev/null
+++ b/drivers/leds/leds-ot200.c
@@ -0,0 +1,171 @@
+/*
+ * Bachmann ot200 leds driver.
+ *
+ * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ *         Christian Gmeiner <christian.gmeiner@gmail.com>
+ *
+ * License: GPL as published by the FSF.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+
+struct ot200_led {
+	struct led_classdev cdev;
+	const char *name;
+	unsigned long port;
+	u8 mask;
+};
+
+/*
+ * The device has three leds on the back panel (led_err, led_init and led_run)
+ * and can handle up to seven leds on the front panel.
+ */
+
+static struct ot200_led leds[] = {
+	{
+		.name = "led_run",
+		.port = 0x5a,
+		.mask = BIT(0),
+	},
+	{
+		.name = "led_init",
+		.port = 0x5a,
+		.mask = BIT(1),
+	},
+	{
+		.name = "led_err",
+		.port = 0x5a,
+		.mask = BIT(2),
+	},
+	{
+		.name = "led_1",
+		.port = 0x49,
+		.mask = BIT(7),
+	},
+	{
+		.name = "led_2",
+		.port = 0x49,
+		.mask = BIT(6),
+	},
+	{
+		.name = "led_3",
+		.port = 0x49,
+		.mask = BIT(5),
+	},
+	{
+		.name = "led_4",
+		.port = 0x49,
+		.mask = BIT(4),
+	},
+	{
+		.name = "led_5",
+		.port = 0x49,
+		.mask = BIT(3),
+	},
+	{
+		.name = "led_6",
+		.port = 0x49,
+		.mask = BIT(2),
+	},
+	{
+		.name = "led_7",
+		.port = 0x49,
+		.mask = BIT(1),
+	}
+};
+
+static DEFINE_SPINLOCK(value_lock);
+
+/*
+ * we need to store the current led states, as it is not
+ * possible to read the current led state via inb().
+ */
+static u8 leds_back;
+static u8 leds_front;
+
+static void ot200_led_brightness_set(struct led_classdev *led_cdev,
+		enum led_brightness value)
+{
+	struct ot200_led *led = container_of(led_cdev, struct ot200_led, cdev);
+	u8 *val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&value_lock, flags);
+
+	if (led->port == 0x49)
+		val = &leds_front;
+	else if (led->port == 0x5a)
+		val = &leds_back;
+	else
+		BUG();
+
+	if (value == LED_OFF)
+		*val &= ~led->mask;
+	else
+		*val |= led->mask;
+
+	outb(*val, led->port);
+	spin_unlock_irqrestore(&value_lock, flags);
+}
+
+static int __devinit ot200_led_probe(struct platform_device *pdev)
+{
+	int i;
+	int ret;
+
+	for (i = 0; i < ARRAY_SIZE(leds); i++) {
+
+		leds[i].cdev.name = leds[i].name;
+		leds[i].cdev.brightness_set = ot200_led_brightness_set;
+
+		ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
+		if (ret < 0)
+			goto err;
+	}
+
+	leds_front = 0;		/* turn off all front leds */
+	leds_back = BIT(1);	/* turn on init led */
+	outb(leds_front, 0x49);
+	outb(leds_back, 0x5a);
+
+	return 0;
+
+err:
+	for (i = i - 1; i >= 0; i--)
+		led_classdev_unregister(&leds[i].cdev);
+
+	return ret;
+}
+
+static int __devexit ot200_led_remove(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(leds); i++)
+		led_classdev_unregister(&leds[i].cdev);
+
+	return 0;
+}
+
+static struct platform_driver ot200_led_driver = {
+	.probe		= ot200_led_probe,
+	.remove		= __devexit_p(ot200_led_remove),
+	.driver		= {
+		.name	= "leds-ot200",
+		.owner	= THIS_MODULE,
+	},
+};
+
+module_platform_driver(ot200_led_driver);
+
+MODULE_AUTHOR("Sebastian A. Siewior <bigeasy@linutronix.de>");
+MODULE_DESCRIPTION("ot200 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-ot200");
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index a2c874623e3..ceccab44b5b 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -489,20 +489,8 @@ static int pca9532_remove(struct i2c_client *client)
 	return 0;
 }
 
-static int __init pca9532_init(void)
-{
-	return i2c_add_driver(&pca9532_driver);
-}
-
-static void __exit pca9532_exit(void)
-{
-	i2c_del_driver(&pca9532_driver);
-}
+module_i2c_driver(pca9532_driver);
 
 MODULE_AUTHOR("Riku Voipio");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("PCA 9532 LED dimmer");
-
-module_init(pca9532_init);
-module_exit(pca9532_exit);
-
diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index 66aa3e8e786..dcc3bc3d38d 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -371,18 +371,7 @@ static struct i2c_driver pca955x_driver = {
 	.id_table = pca955x_id,
 };
 
-static int __init pca955x_leds_init(void)
-{
-	return i2c_add_driver(&pca955x_driver);
-}
-
-static void __exit pca955x_leds_exit(void)
-{
-	i2c_del_driver(&pca955x_driver);
-}
-
-module_init(pca955x_leds_init);
-module_exit(pca955x_leds_exit);
+module_i2c_driver(pca955x_driver);
 
 MODULE_AUTHOR("Nate Case <ncase@xes-inc.com>");
 MODULE_DESCRIPTION("PCA955x LED driver");
diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c
index 666daf77872..3ed92f34bd4 100644
--- a/drivers/leds/leds-pwm.c
+++ b/drivers/leds/leds-pwm.c
@@ -135,18 +135,7 @@ static struct platform_driver led_pwm_driver = {
 	},
 };
 
-static int __init led_pwm_init(void)
-{
-	return platform_driver_register(&led_pwm_driver);
-}
-
-static void __exit led_pwm_exit(void)
-{
-	platform_driver_unregister(&led_pwm_driver);
-}
-
-module_init(led_pwm_init);
-module_exit(led_pwm_exit);
+module_platform_driver(led_pwm_driver);
 
 MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
 MODULE_DESCRIPTION("PWM LED driver for PXA");
diff --git a/drivers/leds/leds-rb532.c b/drivers/leds/leds-rb532.c
index c3525f37f73..a7815b6cd85 100644
--- a/drivers/leds/leds-rb532.c
+++ b/drivers/leds/leds-rb532.c
@@ -57,21 +57,9 @@ static struct platform_driver rb532_led_driver = {
 	},
 };
 
-static int __init rb532_led_init(void)
-{
-	return platform_driver_register(&rb532_led_driver);
-}
-
-static void __exit rb532_led_exit(void)
-{
-	platform_driver_unregister(&rb532_led_driver);
-}
-
-module_init(rb532_led_init);
-module_exit(rb532_led_exit);
-
-MODULE_ALIAS("platform:rb532-led");
+module_platform_driver(rb532_led_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("User LED support for Routerboard532");
 MODULE_AUTHOR("Phil Sutter <n0-1@freewrt.org>");
+MODULE_ALIAS("platform:rb532-led");
diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c
index 8497f56f8e4..df7e963bddd 100644
--- a/drivers/leds/leds-regulator.c
+++ b/drivers/leds/leds-regulator.c
@@ -229,17 +229,7 @@ static struct platform_driver regulator_led_driver = {
 	.remove = __devexit_p(regulator_led_remove),
 };
 
-static int __init regulator_led_init(void)
-{
-	return platform_driver_register(&regulator_led_driver);
-}
-module_init(regulator_led_init);
-
-static void __exit regulator_led_exit(void)
-{
-	platform_driver_unregister(&regulator_led_driver);
-}
-module_exit(regulator_led_exit);
+module_platform_driver(regulator_led_driver);
 
 MODULE_AUTHOR("Antonio Ospite <ospite@studenti.unina.it>");
 MODULE_DESCRIPTION("Regulator driven LED driver");
diff --git a/drivers/leds/leds-renesas-tpu.c b/drivers/leds/leds-renesas-tpu.c
index 3ee540eb127..32fe337d5c6 100644
--- a/drivers/leds/leds-renesas-tpu.c
+++ b/drivers/leds/leds-renesas-tpu.c
@@ -339,18 +339,7 @@ static struct platform_driver r_tpu_device_driver = {
 	}
 };
 
-static int __init r_tpu_init(void)
-{
-	return platform_driver_register(&r_tpu_device_driver);
-}
-
-static void __exit r_tpu_exit(void)
-{
-	platform_driver_unregister(&r_tpu_device_driver);
-}
-
-module_init(r_tpu_init);
-module_exit(r_tpu_exit);
+module_platform_driver(r_tpu_device_driver);
 
 MODULE_AUTHOR("Magnus Damm");
 MODULE_DESCRIPTION("Renesas TPU LED Driver");
diff --git a/drivers/leds/leds-s3c24xx.c b/drivers/leds/leds-s3c24xx.c
index 29f8b0f0e2c..bd0a5ed49c4 100644
--- a/drivers/leds/leds-s3c24xx.c
+++ b/drivers/leds/leds-s3c24xx.c
@@ -121,18 +121,7 @@ static struct platform_driver s3c24xx_led_driver = {
 	},
 };
 
-static int __init s3c24xx_led_init(void)
-{
-	return platform_driver_register(&s3c24xx_led_driver);
-}
-
-static void __exit s3c24xx_led_exit(void)
-{
-	platform_driver_unregister(&s3c24xx_led_driver);
-}
-
-module_init(s3c24xx_led_init);
-module_exit(s3c24xx_led_exit);
+module_platform_driver(s3c24xx_led_driver);
 
 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
 MODULE_DESCRIPTION("S3C24XX LED driver");
diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
index 614ebebaaa2..57371e1485a 100644
--- a/drivers/leds/leds-ss4200.c
+++ b/drivers/leds/leds-ss4200.c
@@ -79,7 +79,7 @@ static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id)
 	return 1;
 }
 
-static unsigned int __initdata nodetect;
+static bool __initdata nodetect;
 module_param_named(nodetect, nodetect, bool, 0);
 MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection");
 
diff --git a/drivers/leds/leds-tca6507.c b/drivers/leds/leds-tca6507.c
new file mode 100644
index 00000000000..133f89fb707
--- /dev/null
+++ b/drivers/leds/leds-tca6507.c
@@ -0,0 +1,779 @@
+/*
+ * leds-tca6507
+ *
+ * The TCA6507 is a programmable LED controller that can drive 7
+ * separate lines either by holding them low, or by pulsing them
+ * with modulated width.
+ * The modulation can be varied in a simple pattern to produce a blink or
+ * double-blink.
+ *
+ * This driver can configure each line either as a 'GPIO' which is out-only
+ * (no pull-up) or as an LED with variable brightness and hardware-assisted
+ * blinking.
+ *
+ * Apart from OFF and ON there are three programmable brightness levels which
+ * can be programmed from 0 to 15 and indicate how many 500usec intervals in
+ * each 8msec that the led is 'on'.  The levels are named MASTER, BANK0 and
+ * BANK1.
+ *
+ * There are two different blink rates that can be programmed, each with
+ * separate time for rise, on, fall, off and second-off.  Thus if 3 or more
+ * different non-trivial rates are required, software must be used for the extra
+ * rates. The two different blink rates must align with the two levels BANK0 and
+ * BANK1.
+ * This driver does not support double-blink so 'second-off' always matches
+ * 'off'.
+ *
+ * Only 16 different times can be programmed in a roughly logarithmic scale from
+ * 64ms to 16320ms.  To be precise the possible times are:
+ *    0, 64, 128, 192, 256, 384, 512, 768,
+ *    1024, 1536, 2048, 3072, 4096, 5760, 8128, 16320
+ *
+ * Times that cannot be closely matched with these must be
+ * handled in software.  This driver allows 12.5% error in matching.
+ *
+ * This driver does not allow rise/fall rates to be set explicitly.  When trying
+ * to match a given 'on' or 'off' period, an appropriate pair of 'change' and
+ * 'hold' times are chosen to get a close match.  If the target delay is even,
+ * the 'change' number will be the smaller; if odd, the 'hold' number will be
+ * the smaller.
+
+ * Choosing pairs of delays with 12.5% errors allows us to match delays in the
+ * ranges: 56-72, 112-144, 168-216, 224-27504, 28560-36720.
+ * 26% of the achievable sums can be matched by multiple pairings. For example
+ * 1536 == 1536+0, 1024+512, or 768+768.  This driver will always choose the
+ * pairing with the least maximum - 768+768 in this case.  Other pairings are
+ * not available.
+ *
+ * Access to the 3 levels and 2 blinks are on a first-come, first-served basis.
+ * Access can be shared by multiple leds if they have the same level and
+ * either same blink rates, or some don't blink.
+ * When a led changes, it relinquishes access and tries again, so it might
+ * lose access to hardware blink.
+ * If a blink engine cannot be allocated, software blink is used.
+ * If the desired brightness cannot be allocated, the closest available non-zero
+ * brightness is used.  As 'full' is always available, the worst case would be
+ * to have two different blink rates at '1', with Max at '2', then other leds
+ * will have to choose between '2' and '16'.  Hopefully this is not likely.
+ *
+ * Each bank (BANK0 and BANK1) has two usage counts - LEDs using the brightness
+ * and LEDs using the blink.  It can only be reprogrammed when the appropriate
+ * counter is zero.  The MASTER level has a single usage count.
+ *
+ * Each Led has programmable 'on' and 'off' time as milliseconds.  With each
+ * there is a flag saying if it was explicitly requested or defaulted.
+ * Similarly the banks know if each time was explicit or a default.  Defaults
+ * are permitted to be changed freely - they are not recognised when matching.
+ *
+ *
+ * An led-tca6507 device must be provided with platform data.  This data
+ * lists for each output: the name, default trigger, and whether the signal
+ * is being used as a GPiO rather than an led.  'struct led_plaform_data'
+ * is used for this.  If 'name' is NULL, the output isn't used.  If 'flags'
+ * is TCA6507_MAKE_CPIO, the output is a GPO.
+ * The "struct led_platform_data" can be embedded in a
+ * "struct tca6507_platform_data" which adds a 'gpio_base' for the GPiOs,
+ * and a 'setup' callback which is called once the GPiOs are available.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/workqueue.h>
+#include <linux/leds-tca6507.h>
+
+/* LED select registers determine the source that drives LED outputs */
+#define TCA6507_LS_LED_OFF	0x0	/* Output HI-Z (off) */
+#define TCA6507_LS_LED_OFF1	0x1	/* Output HI-Z (off) - not used */
+#define TCA6507_LS_LED_PWM0	0x2	/* Output LOW with Bank0 rate */
+#define TCA6507_LS_LED_PWM1	0x3	/* Output LOW with Bank1 rate */
+#define TCA6507_LS_LED_ON	0x4	/* Output LOW (on) */
+#define TCA6507_LS_LED_MIR	0x5	/* Output LOW with Master Intensity */
+#define TCA6507_LS_BLINK0	0x6	/* Blink at Bank0 rate */
+#define TCA6507_LS_BLINK1	0x7	/* Blink at Bank1 rate */
+
+enum {
+	BANK0,
+	BANK1,
+	MASTER,
+};
+static int bank_source[3] = {
+	TCA6507_LS_LED_PWM0,
+	TCA6507_LS_LED_PWM1,
+	TCA6507_LS_LED_MIR,
+};
+static int blink_source[2] = {
+	TCA6507_LS_BLINK0,
+	TCA6507_LS_BLINK1,
+};
+
+/* PWM registers */
+#define	TCA6507_REG_CNT			11
+
+/*
+ * 0x00, 0x01, 0x02 encode the TCA6507_LS_* values, each output
+ * owns one bit in each register
+ */
+#define	TCA6507_FADE_ON			0x03
+#define	TCA6507_FULL_ON			0x04
+#define	TCA6507_FADE_OFF		0x05
+#define	TCA6507_FIRST_OFF		0x06
+#define	TCA6507_SECOND_OFF		0x07
+#define	TCA6507_MAX_INTENSITY		0x08
+#define	TCA6507_MASTER_INTENSITY	0x09
+#define	TCA6507_INITIALIZE		0x0A
+
+#define	INIT_CODE			0x8
+
+#define TIMECODES 16
+static int time_codes[TIMECODES] = {
+	0, 64, 128, 192, 256, 384, 512, 768,
+	1024, 1536, 2048, 3072, 4096, 5760, 8128, 16320
+};
+
+/* Convert an led.brightness level (0..255) to a TCA6507 level (0..15) */
+static inline int TO_LEVEL(int brightness)
+{
+	return brightness >> 4;
+}
+
+/* ...and convert back */
+static inline int TO_BRIGHT(int level)
+{
+	if (level)
+		return (level << 4) | 0xf;
+	return 0;
+}
+
+#define NUM_LEDS 7
+struct tca6507_chip {
+	int			reg_set;	/* One bit per register where
+						 * a '1' means the register
+						 * should be written */
+	u8			reg_file[TCA6507_REG_CNT];
+	/* Bank 2 is Master Intensity and doesn't use times */
+	struct bank {
+		int level;
+		int ontime, offtime;
+		int on_dflt, off_dflt;
+		int time_use, level_use;
+	} bank[3];
+	struct i2c_client	*client;
+	struct work_struct	work;
+	spinlock_t		lock;
+
+	struct tca6507_led {
+		struct tca6507_chip	*chip;
+		struct led_classdev	led_cdev;
+		int			num;
+		int			ontime, offtime;
+		int			on_dflt, off_dflt;
+		int			bank;	/* Bank used, or -1 */
+		int			blink;	/* Set if hardware-blinking */
+	} leds[NUM_LEDS];
+#ifdef CONFIG_GPIOLIB
+	struct gpio_chip		gpio;
+	const char			*gpio_name[NUM_LEDS];
+	int				gpio_map[NUM_LEDS];
+#endif
+};
+
+static const struct i2c_device_id tca6507_id[] = {
+	{ "tca6507" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tca6507_id);
+
+static int choose_times(int msec, int *c1p, int *c2p)
+{
+	/*
+	 * Choose two timecodes which add to 'msec' as near as possible.
+	 * The first returned is the 'on' or 'off' time.  The second is to be
+	 * used as a 'fade-on' or 'fade-off' time.  If 'msec' is even,
+	 * the first will not be smaller than the second.  If 'msec' is odd,
+	 * the first will not be larger than the second.
+	 * If we cannot get a sum within 1/8 of 'msec' fail with -EINVAL,
+	 * otherwise return the sum that was achieved, plus 1 if the first is
+	 * smaller.
+	 * If two possibilities are equally good (e.g. 512+0, 256+256), choose
+	 * the first pair so there is more change-time visible (i.e. it is
+	 * softer).
+	 */
+	int c1, c2;
+	int tmax = msec * 9 / 8;
+	int tmin = msec * 7 / 8;
+	int diff = 65536;
+
+	/* We start at '1' to ensure we never even think of choosing a
+	 * total time of '0'.
+	 */
+	for (c1 = 1; c1 < TIMECODES; c1++) {
+		int t = time_codes[c1];
+		if (t*2 < tmin)
+			continue;
+		if (t > tmax)
+			break;
+		for (c2 = 0; c2 <= c1; c2++) {
+			int tt = t + time_codes[c2];
+			int d;
+			if (tt < tmin)
+				continue;
+			if (tt > tmax)
+				break;
+			/* This works! */
+			d = abs(msec - tt);
+			if (d >= diff)
+				continue;
+			/* Best yet */
+			*c1p = c1;
+			*c2p = c2;
+			diff = d;
+			if (d == 0)
+				return msec;
+		}
+	}
+	if (diff < 65536) {
+		int actual;
+		if (msec & 1) {
+			c1 = *c2p;
+			*c2p = *c1p;
+			*c1p = c1;
+		}
+		actual = time_codes[*c1p] + time_codes[*c2p];
+		if (*c1p < *c2p)
+			return actual + 1;
+		else
+			return actual;
+	}
+	/* No close match */
+	return -EINVAL;
+}
+
+/*
+ * Update the register file with the appropriate 3-bit state for
+ * the given led.
+ */
+static void set_select(struct tca6507_chip *tca, int led, int val)
+{
+	int mask = (1 << led);
+	int bit;
+
+	for (bit = 0; bit < 3; bit++) {
+		int n = tca->reg_file[bit] & ~mask;
+		if (val & (1 << bit))
+			n |= mask;
+		if (tca->reg_file[bit] != n) {
+			tca->reg_file[bit] = n;
+			tca->reg_set |= (1 << bit);
+		}
+	}
+}
+
+/* Update the register file with the appropriate 4-bit code for
+ * one bank or other.  This can be used for timers, for levels, or
+ * for initialisation.
+ */
+static void set_code(struct tca6507_chip *tca, int reg, int bank, int new)
+{
+	int mask = 0xF;
+	int n;
+	if (bank) {
+		mask <<= 4;
+		new <<= 4;
+	}
+	n = tca->reg_file[reg] & ~mask;
+	n |= new;
+	if (tca->reg_file[reg] != n) {
+		tca->reg_file[reg] = n;
+		tca->reg_set |= 1 << reg;
+	}
+}
+
+/* Update brightness level. */
+static void set_level(struct tca6507_chip *tca, int bank, int level)
+{
+	switch (bank) {
+	case BANK0:
+	case BANK1:
+		set_code(tca, TCA6507_MAX_INTENSITY, bank, level);
+		break;
+	case MASTER:
+		set_code(tca, TCA6507_MASTER_INTENSITY, 0, level);
+		break;
+	}
+	tca->bank[bank].level = level;
+}
+
+/* Record all relevant time code for a given bank */
+static void set_times(struct tca6507_chip *tca, int bank)
+{
+	int c1, c2;
+	int result;
+
+	result = choose_times(tca->bank[bank].ontime, &c1, &c2);
+	dev_dbg(&tca->client->dev,
+		"Chose on  times %d(%d) %d(%d) for %dms\n", c1, time_codes[c1],
+		c2, time_codes[c2], tca->bank[bank].ontime);
+	set_code(tca, TCA6507_FADE_ON, bank, c2);
+	set_code(tca, TCA6507_FULL_ON, bank, c1);
+	tca->bank[bank].ontime = result;
+
+	result = choose_times(tca->bank[bank].offtime, &c1, &c2);
+	dev_dbg(&tca->client->dev,
+		"Chose off times %d(%d) %d(%d) for %dms\n", c1, time_codes[c1],
+		c2, time_codes[c2], tca->bank[bank].offtime);
+	set_code(tca, TCA6507_FADE_OFF, bank, c2);
+	set_code(tca, TCA6507_FIRST_OFF, bank, c1);
+	set_code(tca, TCA6507_SECOND_OFF, bank, c1);
+	tca->bank[bank].offtime = result;
+
+	set_code(tca, TCA6507_INITIALIZE, bank, INIT_CODE);
+}
+
+/* Write all needed register of tca6507 */
+
+static void tca6507_work(struct work_struct *work)
+{
+	struct tca6507_chip *tca = container_of(work, struct tca6507_chip,
+						work);
+	struct i2c_client *cl = tca->client;
+	int set;
+	u8 file[TCA6507_REG_CNT];
+	int r;
+
+	spin_lock_irq(&tca->lock);
+	set = tca->reg_set;
+	memcpy(file, tca->reg_file, TCA6507_REG_CNT);
+	tca->reg_set = 0;
+	spin_unlock_irq(&tca->lock);
+
+	for (r = 0; r < TCA6507_REG_CNT; r++)
+		if (set & (1<<r))
+			i2c_smbus_write_byte_data(cl, r, file[r]);
+}
+
+static void led_release(struct tca6507_led *led)
+{
+	/* If led owns any resource, release it. */
+	struct tca6507_chip *tca = led->chip;
+	if (led->bank >= 0) {
+		struct bank *b = tca->bank + led->bank;
+		if (led->blink)
+			b->time_use--;
+		b->level_use--;
+	}
+	led->blink = 0;
+	led->bank = -1;
+}
+
+static int led_prepare(struct tca6507_led *led)
+{
+	/* Assign this led to a bank, configuring that bank if necessary. */
+	int level = TO_LEVEL(led->led_cdev.brightness);
+	struct tca6507_chip *tca = led->chip;
+	int c1, c2;
+	int i;
+	struct bank *b;
+	int need_init = 0;
+
+	led->led_cdev.brightness = TO_BRIGHT(level);
+	if (level == 0) {
+		set_select(tca, led->num, TCA6507_LS_LED_OFF);
+		return 0;
+	}
+
+	if (led->ontime == 0 || led->offtime == 0) {
+		/*
+		 * Just set the brightness, choosing first usable bank.
+		 * If none perfect, choose best.
+		 * Count backwards so we check MASTER bank first
+		 * to avoid wasting a timer.
+		 */
+		int best = -1;/* full-on */
+		int diff = 15-level;
+
+		if (level == 15) {
+			set_select(tca, led->num, TCA6507_LS_LED_ON);
+			return 0;
+		}
+
+		for (i = MASTER; i >= BANK0; i--) {
+			int d;
+			if (tca->bank[i].level == level ||
+			    tca->bank[i].level_use == 0) {
+				best = i;
+				break;
+			}
+			d = abs(level - tca->bank[i].level);
+			if (d < diff) {
+				diff = d;
+				best = i;
+			}
+		}
+		if (best == -1) {
+			/* Best brightness is full-on */
+			set_select(tca, led->num, TCA6507_LS_LED_ON);
+			led->led_cdev.brightness = LED_FULL;
+			return 0;
+		}
+
+		if (!tca->bank[best].level_use)
+			set_level(tca, best, level);
+
+		tca->bank[best].level_use++;
+		led->bank = best;
+		set_select(tca, led->num, bank_source[best]);
+		led->led_cdev.brightness = TO_BRIGHT(tca->bank[best].level);
+		return 0;
+	}
+
+	/*
+	 * We have on/off time so we need to try to allocate a timing bank.
+	 * First check if times are compatible with hardware and give up if
+	 * not.
+	 */
+	if (choose_times(led->ontime, &c1, &c2) < 0)
+		return -EINVAL;
+	if (choose_times(led->offtime, &c1, &c2) < 0)
+		return -EINVAL;
+
+	for (i = BANK0; i <= BANK1; i++) {
+		if (tca->bank[i].level_use == 0)
+			/* not in use - it is ours! */
+			break;
+		if (tca->bank[i].level != level)
+			/* Incompatible level - skip */
+			/* FIX: if timer matches we maybe should consider
+			 * this anyway...
+			 */
+			continue;
+
+		if (tca->bank[i].time_use == 0)
+			/* Timer not in use, and level matches - use it */
+			break;
+
+		if (!(tca->bank[i].on_dflt ||
+		      led->on_dflt ||
+		      tca->bank[i].ontime == led->ontime))
+			/* on time is incompatible */
+			continue;
+
+		if (!(tca->bank[i].off_dflt ||
+		      led->off_dflt ||
+		      tca->bank[i].offtime == led->offtime))
+			/* off time is incompatible */
+			continue;
+
+		/* looks like a suitable match */
+		break;
+	}
+
+	if (i > BANK1)
+		/* Nothing matches - how sad */
+		return -EINVAL;
+
+	b = &tca->bank[i];
+	if (b->level_use == 0)
+		set_level(tca, i, level);
+	b->level_use++;
+	led->bank = i;
+
+	if (b->on_dflt ||
+	    !led->on_dflt ||
+	    b->time_use == 0) {
+		b->ontime = led->ontime;
+		b->on_dflt = led->on_dflt;
+		need_init = 1;
+	}
+
+	if (b->off_dflt ||
+	    !led->off_dflt ||
+	    b->time_use == 0) {
+		b->offtime = led->offtime;
+		b->off_dflt = led->off_dflt;
+		need_init = 1;
+	}
+
+	if (need_init)
+		set_times(tca, i);
+
+	led->ontime = b->ontime;
+	led->offtime = b->offtime;
+
+	b->time_use++;
+	led->blink = 1;
+	led->led_cdev.brightness = TO_BRIGHT(b->level);
+	set_select(tca, led->num, blink_source[i]);
+	return 0;
+}
+
+static int led_assign(struct tca6507_led *led)
+{
+	struct tca6507_chip *tca = led->chip;
+	int err;
+	unsigned long flags;
+
+	spin_lock_irqsave(&tca->lock, flags);
+	led_release(led);
+	err = led_prepare(led);
+	if (err) {
+		/*
+		 * Can only fail on timer setup.  In that case we need to
+		 * re-establish as steady level.
+		 */
+		led->ontime = 0;
+		led->offtime = 0;
+		led_prepare(led);
+	}
+	spin_unlock_irqrestore(&tca->lock, flags);
+
+	if (tca->reg_set)
+		schedule_work(&tca->work);
+	return err;
+}
+
+static void tca6507_brightness_set(struct led_classdev *led_cdev,
+				   enum led_brightness brightness)
+{
+	struct tca6507_led *led = container_of(led_cdev, struct tca6507_led,
+					       led_cdev);
+	led->led_cdev.brightness = brightness;
+	led->ontime = 0;
+	led->offtime = 0;
+	led_assign(led);
+}
+
+static int tca6507_blink_set(struct led_classdev *led_cdev,
+			     unsigned long *delay_on,
+			     unsigned long *delay_off)
+{
+	struct tca6507_led *led = container_of(led_cdev, struct tca6507_led,
+					       led_cdev);
+
+	if (*delay_on == 0)
+		led->on_dflt = 1;
+	else if (delay_on != &led_cdev->blink_delay_on)
+		led->on_dflt = 0;
+	led->ontime = *delay_on;
+
+	if (*delay_off == 0)
+		led->off_dflt = 1;
+	else if (delay_off != &led_cdev->blink_delay_off)
+		led->off_dflt = 0;
+	led->offtime = *delay_off;
+
+	if (led->ontime == 0)
+		led->ontime = 512;
+	if (led->offtime == 0)
+		led->offtime = 512;
+
+	if (led->led_cdev.brightness == LED_OFF)
+		led->led_cdev.brightness = LED_FULL;
+	if (led_assign(led) < 0) {
+		led->ontime = 0;
+		led->offtime = 0;
+		led->led_cdev.brightness = LED_OFF;
+		return -EINVAL;
+	}
+	*delay_on = led->ontime;
+	*delay_off = led->offtime;
+	return 0;
+}
+
+#ifdef CONFIG_GPIOLIB
+static void tca6507_gpio_set_value(struct gpio_chip *gc,
+				   unsigned offset, int val)
+{
+	struct tca6507_chip *tca = container_of(gc, struct tca6507_chip, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tca->lock, flags);
+	/*
+	 * 'OFF' is floating high, and 'ON' is pulled down, so it has the
+	 * inverse sense of 'val'.
+	 */
+	set_select(tca, tca->gpio_map[offset],
+		   val ? TCA6507_LS_LED_OFF : TCA6507_LS_LED_ON);
+	spin_unlock_irqrestore(&tca->lock, flags);
+	if (tca->reg_set)
+		schedule_work(&tca->work);
+}
+
+static int tca6507_gpio_direction_output(struct gpio_chip *gc,
+					  unsigned offset, int val)
+{
+	tca6507_gpio_set_value(gc, offset, val);
+	return 0;
+}
+
+static int tca6507_probe_gpios(struct i2c_client *client,
+			       struct tca6507_chip *tca,
+			       struct tca6507_platform_data *pdata)
+{
+	int err;
+	int i = 0;
+	int gpios = 0;
+
+	for (i = 0; i < NUM_LEDS; i++)
+		if (pdata->leds.leds[i].name && pdata->leds.leds[i].flags) {
+			/* Configure as a gpio */
+			tca->gpio_name[gpios] = pdata->leds.leds[i].name;
+			tca->gpio_map[gpios] = i;
+			gpios++;
+		}
+
+	if (!gpios)
+		return 0;
+
+	tca->gpio.label = "gpio-tca6507";
+	tca->gpio.names = tca->gpio_name;
+	tca->gpio.ngpio = gpios;
+	tca->gpio.base = pdata->gpio_base;
+	tca->gpio.owner = THIS_MODULE;
+	tca->gpio.direction_output = tca6507_gpio_direction_output;
+	tca->gpio.set = tca6507_gpio_set_value;
+	tca->gpio.dev = &client->dev;
+	err = gpiochip_add(&tca->gpio);
+	if (err) {
+		tca->gpio.ngpio = 0;
+		return err;
+	}
+	if (pdata->setup)
+		pdata->setup(tca->gpio.base, tca->gpio.ngpio);
+	return 0;
+}
+
+static void tca6507_remove_gpio(struct tca6507_chip *tca)
+{
+	if (tca->gpio.ngpio) {
+		int err = gpiochip_remove(&tca->gpio);
+		dev_err(&tca->client->dev, "%s failed, %d\n",
+			"gpiochip_remove()", err);
+	}
+}
+#else /* CONFIG_GPIOLIB */
+static int tca6507_probe_gpios(struct i2c_client *client,
+			       struct tca6507_chip *tca,
+			       struct tca6507_platform_data *pdata)
+{
+	return 0;
+}
+static void tca6507_remove_gpio(struct tca6507_chip *tca)
+{
+}
+#endif /* CONFIG_GPIOLIB */
+
+static int __devinit tca6507_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct tca6507_chip *tca;
+	struct i2c_adapter *adapter;
+	struct tca6507_platform_data *pdata;
+	int err;
+	int i = 0;
+
+	adapter = to_i2c_adapter(client->dev.parent);
+	pdata = client->dev.platform_data;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
+		return -EIO;
+
+	if (!pdata || pdata->leds.num_leds != NUM_LEDS) {
+		dev_err(&client->dev, "Need %d entries in platform-data list\n",
+			NUM_LEDS);
+		return -ENODEV;
+	}
+	err = -ENOMEM;
+	tca = kzalloc(sizeof(*tca), GFP_KERNEL);
+	if (!tca)
+		goto exit;
+
+	tca->client = client;
+	INIT_WORK(&tca->work, tca6507_work);
+	spin_lock_init(&tca->lock);
+	i2c_set_clientdata(client, tca);
+
+	for (i = 0; i < NUM_LEDS; i++) {
+		struct tca6507_led *l = tca->leds + i;
+
+		l->chip = tca;
+		l->num = i;
+		if (pdata->leds.leds[i].name && !pdata->leds.leds[i].flags) {
+			l->led_cdev.name = pdata->leds.leds[i].name;
+			l->led_cdev.default_trigger
+				= pdata->leds.leds[i].default_trigger;
+			l->led_cdev.brightness_set = tca6507_brightness_set;
+			l->led_cdev.blink_set = tca6507_blink_set;
+			l->bank = -1;
+			err = led_classdev_register(&client->dev,
+						    &l->led_cdev);
+			if (err < 0)
+				goto exit;
+		}
+	}
+	err = tca6507_probe_gpios(client, tca, pdata);
+	if (err)
+		goto exit;
+	/* set all registers to known state - zero */
+	tca->reg_set = 0x7f;
+	schedule_work(&tca->work);
+
+	return 0;
+exit:
+	while (i--)
+		if (tca->leds[i].led_cdev.name)
+			led_classdev_unregister(&tca->leds[i].led_cdev);
+	cancel_work_sync(&tca->work);
+	i2c_set_clientdata(client, NULL);
+	kfree(tca);
+	return err;
+}
+
+static int __devexit tca6507_remove(struct i2c_client *client)
+{
+	int i;
+	struct tca6507_chip *tca = i2c_get_clientdata(client);
+	struct tca6507_led *tca_leds = tca->leds;
+
+	for (i = 0; i < NUM_LEDS; i++) {
+		if (tca_leds[i].led_cdev.name)
+			led_classdev_unregister(&tca_leds[i].led_cdev);
+	}
+	tca6507_remove_gpio(tca);
+	cancel_work_sync(&tca->work);
+	i2c_set_clientdata(client, NULL);
+	kfree(tca);
+
+	return 0;
+}
+
+static struct i2c_driver tca6507_driver = {
+	.driver   = {
+		.name    = "leds-tca6507",
+		.owner   = THIS_MODULE,
+	},
+	.probe    = tca6507_probe,
+	.remove   = __devexit_p(tca6507_remove),
+	.id_table = tca6507_id,
+};
+
+static int __init tca6507_leds_init(void)
+{
+	return i2c_add_driver(&tca6507_driver);
+}
+
+static void __exit tca6507_leds_exit(void)
+{
+	i2c_del_driver(&tca6507_driver);
+}
+
+module_init(tca6507_leds_init);
+module_exit(tca6507_leds_exit);
+
+MODULE_AUTHOR("NeilBrown <neilb@suse.de>");
+MODULE_DESCRIPTION("TCA6507 LED/GPO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c
index b1eb34c3e81..74a24cf897c 100644
--- a/drivers/leds/leds-wm831x-status.c
+++ b/drivers/leds/leds-wm831x-status.c
@@ -237,7 +237,8 @@ static int wm831x_status_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	drvdata = kzalloc(sizeof(struct wm831x_status), GFP_KERNEL);
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_status),
+			       GFP_KERNEL);
 	if (!drvdata)
 		return -ENOMEM;
 	dev_set_drvdata(&pdev->dev, drvdata);
@@ -300,7 +301,6 @@ static int wm831x_status_probe(struct platform_device *pdev)
 
 err_led:
 	led_classdev_unregister(&drvdata->cdev);
-	kfree(drvdata);
 err:
 	return ret;
 }
@@ -311,7 +311,6 @@ static int wm831x_status_remove(struct platform_device *pdev)
 
 	device_remove_file(drvdata->cdev.dev, &dev_attr_src);
 	led_classdev_unregister(&drvdata->cdev);
-	kfree(drvdata);
 
 	return 0;
 }
@@ -325,17 +324,7 @@ static struct platform_driver wm831x_status_driver = {
 	.remove = wm831x_status_remove,
 };
 
-static int __devinit wm831x_status_init(void)
-{
-	return platform_driver_register(&wm831x_status_driver);
-}
-module_init(wm831x_status_init);
-
-static void wm831x_status_exit(void)
-{
-	platform_driver_unregister(&wm831x_status_driver);
-}
-module_exit(wm831x_status_exit);
+module_platform_driver(wm831x_status_driver);
 
 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
 MODULE_DESCRIPTION("WM831x status LED driver");
diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c
index 4a127657835..918d4baff1c 100644
--- a/drivers/leds/leds-wm8350.c
+++ b/drivers/leds/leds-wm8350.c
@@ -227,7 +227,7 @@ static int wm8350_led_probe(struct platform_device *pdev)
 		goto err_isink;
 	}
 
-	led = kzalloc(sizeof(*led), GFP_KERNEL);
+	led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
 	if (led == NULL) {
 		ret = -ENOMEM;
 		goto err_dcdc;
@@ -259,12 +259,10 @@ static int wm8350_led_probe(struct platform_device *pdev)
 
 	ret = led_classdev_register(&pdev->dev, &led->cdev);
 	if (ret < 0)
-		goto err_led;
+		goto err_dcdc;
 
 	return 0;
 
- err_led:
-	kfree(led);
  err_dcdc:
 	regulator_put(dcdc);
  err_isink:
@@ -281,7 +279,6 @@ static int wm8350_led_remove(struct platform_device *pdev)
 	wm8350_led_disable(led);
 	regulator_put(led->dcdc);
 	regulator_put(led->isink);
-	kfree(led);
 	return 0;
 }
 
@@ -295,17 +292,7 @@ static struct platform_driver wm8350_led_driver = {
 	.shutdown = wm8350_led_shutdown,
 };
 
-static int __devinit wm8350_led_init(void)
-{
-	return platform_driver_register(&wm8350_led_driver);
-}
-module_init(wm8350_led_init);
-
-static void wm8350_led_exit(void)
-{
-	platform_driver_unregister(&wm8350_led_driver);
-}
-module_exit(wm8350_led_exit);
+module_platform_driver(wm8350_led_driver);
 
 MODULE_AUTHOR("Mark Brown");
 MODULE_DESCRIPTION("WM8350 LED driver");