summaryrefslogtreecommitdiffstats
path: root/drivers/macintosh/via-pmu.c
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2005-11-23 17:57:25 +1100
committerPaul Mackerras <paulus@samba.org>2006-01-09 14:49:54 +1100
commit51d3082fe6e55aecfa17113dbe98077c749f724c (patch)
tree9a1e2355d5988d8cc1ca511d53c1bb24b0baa17f /drivers/macintosh/via-pmu.c
parent463ce0e103f419f51b1769111e73fe8bb305d0ec (diff)
[PATCH] powerpc: Unify udbg (#2)
This patch unifies udbg for both ppc32 and ppc64 when building the merged achitecture. xmon now has a single "back end". The powermac udbg stuff gets enriched with some ADB capabilities and btext output. In addition, the early_init callback is now called on ppc32 as well, approx. in the same order as ppc64 regarding device-tree manipulations. The init sequences of ppc32 and ppc64 are getting closer, I'll unify them in a later patch. For now, you can force udbg to the scc using "sccdbg" or to btext using "btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg output to something else than the autodetected OF output device in a later patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'drivers/macintosh/via-pmu.c')
-rw-r--r--drivers/macintosh/via-pmu.c87
1 files changed, 55 insertions, 32 deletions
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index 56404350856..13881f19960 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -147,6 +147,7 @@ static struct device_node *vias;
static int pmu_kind = PMU_UNKNOWN;
static int pmu_fully_inited = 0;
static int pmu_has_adb;
+static struct device_node *gpio_node;
static unsigned char __iomem *gpio_reg = NULL;
static int gpio_irq = -1;
static int gpio_irq_enabled = -1;
@@ -295,22 +296,26 @@ static struct backlight_controller pmu_backlight_controller = {
};
#endif /* CONFIG_PMAC_BACKLIGHT */
-int
-find_via_pmu(void)
+int __init find_via_pmu(void)
{
+ phys_addr_t taddr;
+ u32 *reg;
+
if (via != 0)
return 1;
- vias = find_devices("via-pmu");
- if (vias == 0)
+ vias = of_find_node_by_name(NULL, "via-pmu");
+ if (vias == NULL)
return 0;
- if (vias->next != 0)
- printk(KERN_WARNING "Warning: only using 1st via-pmu\n");
- if (vias->n_addrs < 1 || vias->n_intrs < 1) {
- printk(KERN_ERR "via-pmu: %d addresses, %d interrupts!\n",
- vias->n_addrs, vias->n_intrs);
- if (vias->n_addrs < 1 || vias->n_intrs < 1)
- return 0;
+ reg = (u32 *)get_property(vias, "reg", NULL);
+ if (reg == NULL) {
+ printk(KERN_ERR "via-pmu: No \"reg\" property !\n");
+ goto fail;
+ }
+ taddr = of_translate_address(vias, reg);
+ if (taddr == 0) {
+ printk(KERN_ERR "via-pmu: Can't translate address !\n");
+ goto fail;
}
spin_lock_init(&pmu_lock);
@@ -331,7 +336,8 @@ find_via_pmu(void)
pmu_kind = PMU_HEATHROW_BASED;
else if (device_is_compatible(vias->parent, "Keylargo")
|| device_is_compatible(vias->parent, "K2-Keylargo")) {
- struct device_node *gpio, *gpiop;
+ struct device_node *gpiop;
+ phys_addr_t gaddr = 0;
pmu_kind = PMU_KEYLARGO_BASED;
pmu_has_adb = (find_type_devices("adb") != NULL);
@@ -341,19 +347,24 @@ find_via_pmu(void)
PMU_INT_TICK |
PMU_INT_ENVIRONMENT;
- gpiop = find_devices("gpio");
- if (gpiop && gpiop->n_addrs) {
- gpio_reg = ioremap(gpiop->addrs->address, 0x10);
- gpio = find_devices("extint-gpio1");
- if (gpio == NULL)
- gpio = find_devices("pmu-interrupt");
- if (gpio && gpio->parent == gpiop && gpio->n_intrs)
- gpio_irq = gpio->intrs[0].line;
+ gpiop = of_find_node_by_name(NULL, "gpio");
+ if (gpiop) {
+ reg = (u32 *)get_property(gpiop, "reg", NULL);
+ if (reg)
+ gaddr = of_translate_address(gpiop, reg);
+ if (gaddr != 0)
+ gpio_reg = ioremap(gaddr, 0x10);
}
+ if (gpio_reg == NULL)
+ printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
} else
pmu_kind = PMU_UNKNOWN;
- via = ioremap(vias->addrs->address, 0x2000);
+ via = ioremap(taddr, 0x2000);
+ if (via == NULL) {
+ printk(KERN_ERR "via-pmu: Can't map address !\n");
+ goto fail;
+ }
out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
out_8(&via[IFR], 0x7f); /* clear IFR */
@@ -371,17 +382,19 @@ find_via_pmu(void)
sys_ctrler = SYS_CTRLER_PMU;
return 1;
+ fail:
+ of_node_put(vias);
+ vias = NULL;
+ return 0;
}
#ifdef CONFIG_ADB
-static int
-pmu_probe(void)
+static int pmu_probe(void)
{
return vias == NULL? -ENODEV: 0;
}
-static int __init
-pmu_init(void)
+static int __init pmu_init(void)
{
if (vias == NULL)
return -ENODEV;
@@ -405,7 +418,7 @@ static int __init via_pmu_start(void)
bright_req_2.complete = 1;
batt_req.complete = 1;
-#if defined(CONFIG_PPC32) && !defined(CONFIG_PPC_MERGE)
+#ifndef CONFIG_PPC_MERGE
if (pmu_kind == PMU_KEYLARGO_BASED)
openpic_set_irq_priority(vias->intrs[0].line,
OPENPIC_PRIORITY_DEFAULT + 1);
@@ -418,10 +431,22 @@ static int __init via_pmu_start(void)
return -EAGAIN;
}
- if (pmu_kind == PMU_KEYLARGO_BASED && gpio_irq != -1) {
- if (request_irq(gpio_irq, gpio1_interrupt, 0, "GPIO1 ADB", (void *)0))
- printk(KERN_ERR "pmu: can't get irq %d (GPIO1)\n", gpio_irq);
- gpio_irq_enabled = 1;
+ if (pmu_kind == PMU_KEYLARGO_BASED) {
+ gpio_node = of_find_node_by_name(NULL, "extint-gpio1");
+ if (gpio_node == NULL)
+ gpio_node = of_find_node_by_name(NULL,
+ "pmu-interrupt");
+ if (gpio_node && gpio_node->n_intrs > 0)
+ gpio_irq = gpio_node->intrs[0].line;
+
+ if (gpio_irq != -1) {
+ if (request_irq(gpio_irq, gpio1_interrupt, 0,
+ "GPIO1 ADB", (void *)0))
+ printk(KERN_ERR "pmu: can't get irq %d"
+ " (GPIO1)\n", gpio_irq);
+ else
+ gpio_irq_enabled = 1;
+ }
}
/* Enable interrupts */
@@ -1371,7 +1396,6 @@ next:
}
pmu_done(req);
} else {
-#if defined(CONFIG_XMON) && !defined(CONFIG_PPC64)
if (len == 4 && data[1] == 0x2c) {
extern int xmon_wants_key, xmon_adb_keycode;
if (xmon_wants_key) {
@@ -1379,7 +1403,6 @@ next:
return;
}
}
-#endif /* defined(CONFIG_XMON) && !defined(CONFIG_PPC64) */
#ifdef CONFIG_ADB
/*
* XXX On the [23]400 the PMU gives us an up