diff options
| author | Johannes Thumshirn <johannes.thumshirn@men.de> | 2014-12-16 10:09:20 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-01-09 15:46:37 -0800 |
| commit | 7b7c54914f73966976893747ee8e2ca58166a627 (patch) | |
| tree | 867344f8e283b38127c957f0ee4b3247f7e54687 /drivers/mcb | |
| parent | 7e4a90cb2efecb3799bde9280efbf7f4af8f891b (diff) | |
mcb: mcb-pci: Only remap the 1st 0x200 bytes of BAR 0
Currently it is not possible to have a kernel with built-in MCB attached
devices. This results out of the fact that mcb-pci requests PCI BAR 0, then
parses the chameleon table and calls the driver's probe function before
releasing BAR 0 again. When building the kernel with modules this is not a
problem (and therefore it wasn't detected by my tests yet).
A solution is to only remap the 1st 0x200 bytes of a Chameleon PCI device.
0x200 bytes is the maximum size of a Chameleon v2 Table.
Also this patch stops disabling the PCI device on successful registration of MCB
devices.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de>
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/mcb')
| -rw-r--r-- | drivers/mcb/mcb-internal.h | 1 | ||||
| -rw-r--r-- | drivers/mcb/mcb-pci.c | 27 |
2 files changed, 19 insertions, 9 deletions
diff --git a/drivers/mcb/mcb-internal.h b/drivers/mcb/mcb-internal.h index f956ef26c0c..fb7493dcfb7 100644 --- a/drivers/mcb/mcb-internal.h +++ b/drivers/mcb/mcb-internal.h @@ -7,6 +7,7 @@ #define PCI_DEVICE_ID_MEN_CHAMELEON 0x4d45 #define CHAMELEON_FILENAME_LEN 12 #define CHAMELEONV2_MAGIC 0xabce +#define CHAM_HEADER_SIZE 0x200 enum chameleon_descriptor_type { CHAMELEON_DTYPE_GENERAL = 0x0, diff --git a/drivers/mcb/mcb-pci.c b/drivers/mcb/mcb-pci.c index b5918196564..5e1bd5db02c 100644 --- a/drivers/mcb/mcb-pci.c +++ b/drivers/mcb/mcb-pci.c @@ -17,6 +17,7 @@ struct priv { struct mcb_bus *bus; + phys_addr_t mapbase; void __iomem *base; }; @@ -31,8 +32,8 @@ static int mcb_pci_get_irq(struct mcb_device *mdev) static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { + struct resource *res; struct priv *priv; - phys_addr_t mapbase; int ret; int num_cells; unsigned long flags; @@ -47,19 +48,21 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) return -ENODEV; } - mapbase = pci_resource_start(pdev, 0); - if (!mapbase) { + priv->mapbase = pci_resource_start(pdev, 0); + if (!priv->mapbase) { dev_err(&pdev->dev, "No PCI resource\n"); goto err_start; } - ret = pci_request_region(pdev, 0, KBUILD_MODNAME); - if (ret) { - dev_err(&pdev->dev, "Failed to request PCI BARs\n"); + res = request_mem_region(priv->mapbase, CHAM_HEADER_SIZE, + KBUILD_MODNAME); + if (IS_ERR(res)) { + dev_err(&pdev->dev, "Failed to request PCI memory\n"); + ret = PTR_ERR(res); goto err_start; } - priv->base = pci_iomap(pdev, 0, 0); + priv->base = ioremap(priv->mapbase, CHAM_HEADER_SIZE); if (!priv->base) { dev_err(&pdev->dev, "Cannot ioremap\n"); ret = -ENOMEM; @@ -84,7 +87,7 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) priv->bus->get_irq = mcb_pci_get_irq; - ret = chameleon_parse_cells(priv->bus, mapbase, priv->base); + ret = chameleon_parse_cells(priv->bus, priv->mapbase, priv->base); if (ret < 0) goto err_drvdata; num_cells = ret; @@ -93,8 +96,10 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) mcb_bus_add_devices(priv->bus); + return 0; + err_drvdata: - pci_iounmap(pdev, priv->base); + iounmap(priv->base); err_ioremap: pci_release_region(pdev, 0); err_start: @@ -107,6 +112,10 @@ static void mcb_pci_remove(struct pci_dev *pdev) struct priv *priv = pci_get_drvdata(pdev); mcb_release_bus(priv->bus); + + iounmap(priv->base); + release_region(priv->mapbase, CHAM_HEADER_SIZE); + pci_disable_device(pdev); } static const struct pci_device_id mcb_pci_tbl[] = { |