Merge branch 'bcache-for-upstream' of http://evilpiepirate.org/git/linux-bcache into for-3.10/drivers

1 files changed, 379 insertions, 0 deletions

diff --git a/drivers/md/bcache/bset.h b/drivers/md/bcache/bset.h
new file mode 100644
index 00000000000..57a9cff4154
--- /dev/null
+++ b/drivers/md/bcache/bset.h
@@ -0,0 +1,379 @@
+#ifndef _BCACHE_BSET_H
+#define _BCACHE_BSET_H
+
+/*
+ * BKEYS:
+ *
+ * A bkey contains a key, a size field, a variable number of pointers, and some
+ * ancillary flag bits.
+ *
+ * We use two different functions for validating bkeys, bch_ptr_invalid and
+ * bch_ptr_bad().
+ *
+ * bch_ptr_invalid() primarily filters out keys and pointers that would be
+ * invalid due to some sort of bug, whereas bch_ptr_bad() filters out keys and
+ * pointer that occur in normal practice but don't point to real data.
+ *
+ * The one exception to the rule that ptr_invalid() filters out invalid keys is
+ * that it also filters out keys of size 0 - these are keys that have been
+ * completely overwritten. It'd be safe to delete these in memory while leaving
+ * them on disk, just unnecessary work - so we filter them out when resorting
+ * instead.
+ *
+ * We can't filter out stale keys when we're resorting, because garbage
+ * collection needs to find them to ensure bucket gens don't wrap around -
+ * unless we're rewriting the btree node those stale keys still exist on disk.
+ *
+ * We also implement functions here for removing some number of sectors from the
+ * front or the back of a bkey - this is mainly used for fixing overlapping
+ * extents, by removing the overlapping sectors from the older key.
+ *
+ * BSETS:
+ *
+ * A bset is an array of bkeys laid out contiguously in memory in sorted order,
+ * along with a header. A btree node is made up of a number of these, written at
+ * different times.
+ *
+ * There could be many of them on disk, but we never allow there to be more than
+ * 4 in memory - we lazily resort as needed.
+ *
+ * We implement code here for creating and maintaining auxiliary search trees
+ * (described below) for searching an individial bset, and on top of that we
+ * implement a btree iterator.
+ *
+ * BTREE ITERATOR:
+ *
+ * Most of the code in bcache doesn't care about an individual bset - it needs
+ * to search entire btree nodes and iterate over them in sorted order.
+ *
+ * The btree iterator code serves both functions; it iterates through the keys
+ * in a btree node in sorted order, starting from either keys after a specific
+ * point (if you pass it a search key) or the start of the btree node.
+ *
+ * AUXILIARY SEARCH TREES:
+ *
+ * Since keys are variable length, we can't use a binary search on a bset - we
+ * wouldn't be able to find the start of the next key. But binary searches are
+ * slow anyways, due to terrible cache behaviour; bcache originally used binary
+ * searches and that code topped out at under 50k lookups/second.
+ *
+ * So we need to construct some sort of lookup table. Since we only insert keys
+ * into the last (unwritten) set, most of the keys within a given btree node are
+ * usually in sets that are mostly constant. We use two different types of
+ * lookup tables to take advantage of this.
+ *
+ * Both lookup tables share in common that they don't index every key in the
+ * set; they index one key every BSET_CACHELINE bytes, and then a linear search
+ * is used for the rest.
+ *
+ * For sets that have been written to disk and are no longer being inserted
+ * into, we construct a binary search tree in an array - traversing a binary
+ * search tree in an array gives excellent locality of reference and is very
+ * fast, since both children of any node are adjacent to each other in memory
+ * (and their grandchildren, and great grandchildren...) - this means
+ * prefetching can be used to great effect.
+ *
+ * It's quite useful performance wise to keep these nodes small - not just
+ * because they're more likely to be in L2, but also because we can prefetch
+ * more nodes on a single cacheline and thus prefetch more iterations in advance
+ * when traversing this tree.
+ *
+ * Nodes in the auxiliary search tree must contain both a key to compare against
+ * (we don't want to fetch the key from the set, that would defeat the purpose),
+ * and a pointer to the key. We use a few tricks to compress both of these.
+ *
+ * To compress the pointer, we take advantage of the fact that one node in the
+ * search tree corresponds to precisely BSET_CACHELINE bytes in the set. We have
+ * a function (to_inorder()) that takes the index of a node in a binary tree and
+ * returns what its index would be in an inorder traversal, so we only have to
+ * store the low bits of the offset.
+ *
+ * The key is 84 bits (KEY_DEV + key->key, the offset on the device). To
+ * compress that,  we take advantage of the fact that when we're traversing the
+ * search tree at every iteration we know that both our search key and the key
+ * we're looking for lie within some range - bounded by our previous
+ * comparisons. (We special case the start of a search so that this is true even
+ * at the root of the tree).
+ *
+ * So we know the key we're looking for is between a and b, and a and b don't
+ * differ higher than bit 50, we don't need to check anything higher than bit
+ * 50.
+ *
+ * We don't usually need the rest of the bits, either; we only need enough bits
+ * to partition the key range we're currently checking.  Consider key n - the
+ * key our auxiliary search tree node corresponds to, and key p, the key
+ * immediately preceding n.  The lowest bit we need to store in the auxiliary
+ * search tree is the highest bit that differs between n and p.
+ *
+ * Note that this could be bit 0 - we might sometimes need all 80 bits to do the
+ * comparison. But we'd really like our nodes in the auxiliary search tree to be
+ * of fixed size.
+ *
+ * The solution is to make them fixed size, and when we're constructing a node
+ * check if p and n differed in the bits we needed them to. If they don't we
+ * flag that node, and when doing lookups we fallback to comparing against the
+ * real key. As long as this doesn't happen to often (and it seems to reliably
+ * happen a bit less than 1% of the time), we win - even on failures, that key
+ * is then more likely to be in cache than if we were doing binary searches all
+ * the way, since we're touching so much less memory.
+ *
+ * The keys in the auxiliary search tree are stored in (software) floating
+ * point, with an exponent and a mantissa. The exponent needs to be big enough
+ * to address all the bits in the original key, but the number of bits in the
+ * mantissa is somewhat arbitrary; more bits just gets us fewer failures.
+ *
+ * We need 7 bits for the exponent and 3 bits for the key's offset (since keys
+ * are 8 byte aligned); using 22 bits for the mantissa means a node is 4 bytes.
+ * We need one node per 128 bytes in the btree node, which means the auxiliary
+ * search trees take up 3% as much memory as the btree itself.
+ *
+ * Constructing these auxiliary search trees is moderately expensive, and we
+ * don't want to be constantly rebuilding the search tree for the last set
+ * whenever we insert another key into it. For the unwritten set, we use a much
+ * simpler lookup table - it's just a flat array, so index i in the lookup table
+ * corresponds to the i range of BSET_CACHELINE bytes in the set. Indexing
+ * within each byte range works the same as with the auxiliary search trees.
+ *
+ * These are much easier to keep up to date when we insert a key - we do it
+ * somewhat lazily; when we shift a key up we usually just increment the pointer
+ * to it, only when it would overflow do we go to the trouble of finding the
+ * first key in that range of bytes again.
+ */
+
+/* Btree key comparison/iteration */
+
+struct btree_iter {
+	size_t size, used;
+	struct btree_iter_set {
+		struct bkey *k, *end;
+	} data[MAX_BSETS];
+};
+
+struct bset_tree {
+	/*
+	 * We construct a binary tree in an array as if the array
+	 * started at 1, so that things line up on the same cachelines
+	 * better: see comments in bset.c at cacheline_to_bkey() for
+	 * details
+	 */
+
+	/* size of the binary tree and prev array */
+	unsigned	size;
+
+	/* function of size - precalculated for to_inorder() */
+	unsigned	extra;
+
+	/* copy of the last key in the set */
+	struct bkey	end;
+	struct bkey_float *tree;
+
+	/*
+	 * The nodes in the bset tree point to specific keys - this
+	 * array holds the sizes of the previous key.
+	 *
+	 * Conceptually it's a member of struct bkey_float, but we want
+	 * to keep bkey_float to 4 bytes and prev isn't used in the fast
+	 * path.
+	 */
+	uint8_t		*prev;
+
+	/* The actual btree node, with pointers to each sorted set */
+	struct bset	*data;
+};
+
+static __always_inline int64_t bkey_cmp(const struct bkey *l,
+					const struct bkey *r)
+{
+	return unlikely(KEY_INODE(l) != KEY_INODE(r))
+		? (int64_t) KEY_INODE(l) - (int64_t) KEY_INODE(r)
+		: (int64_t) KEY_OFFSET(l) - (int64_t) KEY_OFFSET(r);
+}
+
+static inline size_t bkey_u64s(const struct bkey *k)
+{
+	BUG_ON(KEY_CSUM(k) > 1);
+	return 2 + KEY_PTRS(k) + (KEY_CSUM(k) ? 1 : 0);
+}
+
+static inline size_t bkey_bytes(const struct bkey *k)
+{
+	return bkey_u64s(k) * sizeof(uint64_t);
+}
+
+static inline void bkey_copy(struct bkey *dest, const struct bkey *src)
+{
+	memcpy(dest, src, bkey_bytes(src));
+}
+
+static inline void bkey_copy_key(struct bkey *dest, const struct bkey *src)
+{
+	if (!src)
+		src = &KEY(0, 0, 0);
+
+	SET_KEY_INODE(dest, KEY_INODE(src));
+	SET_KEY_OFFSET(dest, KEY_OFFSET(src));
+}
+
+static inline struct bkey *bkey_next(const struct bkey *k)
+{
+	uint64_t *d = (void *) k;
+	return (struct bkey *) (d + bkey_u64s(k));
+}
+
+/* Keylists */
+
+struct keylist {
+	struct bkey		*top;
+	union {
+		uint64_t		*list;
+		struct bkey		*bottom;
+	};
+
+	/* Enough room for btree_split's keys without realloc */
+#define KEYLIST_INLINE		16
+	uint64_t		d[KEYLIST_INLINE];
+};
+
+static inline void bch_keylist_init(struct keylist *l)
+{
+	l->top = (void *) (l->list = l->d);
+}
+
+static inline void bch_keylist_push(struct keylist *l)
+{
+	l->top = bkey_next(l->top);
+}
+
+static inline void bch_keylist_add(struct keylist *l, struct bkey *k)
+{
+	bkey_copy(l->top, k);
+	bch_keylist_push(l);
+}
+
+static inline bool bch_keylist_empty(struct keylist *l)
+{
+	return l->top == (void *) l->list;
+}
+
+static inline void bch_keylist_free(struct keylist *l)
+{
+	if (l->list != l->d)
+		kfree(l->list);
+}
+
+void bch_keylist_copy(struct keylist *, struct keylist *);
+struct bkey *bch_keylist_pop(struct keylist *);
+int bch_keylist_realloc(struct keylist *, int, struct cache_set *);
+
+void bch_bkey_copy_single_ptr(struct bkey *, const struct bkey *,
+			      unsigned);
+bool __bch_cut_front(const struct bkey *, struct bkey *);
+bool __bch_cut_back(const struct bkey *, struct bkey *);
+
+static inline bool bch_cut_front(const struct bkey *where, struct bkey *k)
+{
+	BUG_ON(bkey_cmp(where, k) > 0);
+	return __bch_cut_front(where, k);
+}
+
+static inline bool bch_cut_back(const struct bkey *where, struct bkey *k)
+{
+	BUG_ON(bkey_cmp(where, &START_KEY(k)) < 0);
+	return __bch_cut_back(where, k);
+}
+
+const char *bch_ptr_status(struct cache_set *, const struct bkey *);
+bool __bch_ptr_invalid(struct cache_set *, int level, const struct bkey *);
+bool bch_ptr_bad(struct btree *, const struct bkey *);
+
+static inline uint8_t gen_after(uint8_t a, uint8_t b)
+{
+	uint8_t r = a - b;
+	return r > 128U ? 0 : r;
+}
+
+static inline uint8_t ptr_stale(struct cache_set *c, const struct bkey *k,
+				unsigned i)
+{
+	return gen_after(PTR_BUCKET(c, k, i)->gen, PTR_GEN(k, i));
+}
+
+static inline bool ptr_available(struct cache_set *c, const struct bkey *k,
+				 unsigned i)
+{
+	return (PTR_DEV(k, i) < MAX_CACHES_PER_SET) && PTR_CACHE(c, k, i);
+}
+
+
+typedef bool (*ptr_filter_fn)(struct btree *, const struct bkey *);
+
+struct bkey *bch_next_recurse_key(struct btree *, struct bkey *);
+struct bkey *bch_btree_iter_next(struct btree_iter *);
+struct bkey *bch_btree_iter_next_filter(struct btree_iter *,
+					struct btree *, ptr_filter_fn);
+
+void bch_btree_iter_push(struct btree_iter *, struct bkey *, struct bkey *);
+struct bkey *__bch_btree_iter_init(struct btree *, struct btree_iter *,
+				   struct bkey *, struct bset_tree *);
+
+/* 32 bits total: */
+#define BKEY_MID_BITS		3
+#define BKEY_EXPONENT_BITS	7
+#define BKEY_MANTISSA_BITS	22
+#define BKEY_MANTISSA_MASK	((1 << BKEY_MANTISSA_BITS) - 1)
+
+struct bkey_float {
+	unsigned	exponent:BKEY_EXPONENT_BITS;
+	unsigned	m:BKEY_MID_BITS;
+	unsigned	mantissa:BKEY_MANTISSA_BITS;
+} __packed;
+
+/*
+ * BSET_CACHELINE was originally intended to match the hardware cacheline size -
+ * it used to be 64, but I realized the lookup code would touch slightly less
+ * memory if it was 128.
+ *
+ * It definites the number of bytes (in struct bset) per struct bkey_float in
+ * the auxiliar search tree - when we're done searching the bset_float tree we
+ * have this many bytes left that we do a linear search over.
+ *
+ * Since (after level 5) every level of the bset_tree is on a new cacheline,
+ * we're touching one fewer cacheline in the bset tree in exchange for one more
+ * cacheline in the linear search - but the linear search might stop before it
+ * gets to the second cacheline.
+ */
+
+#define BSET_CACHELINE		128
+#define bset_tree_space(b)	(btree_data_space(b) / BSET_CACHELINE)
+
+#define bset_tree_bytes(b)	(bset_tree_space(b) * sizeof(struct bkey_float))
+#define bset_prev_bytes(b)	(bset_tree_space(b) * sizeof(uint8_t))
+
+void bch_bset_init_next(struct btree *);
+
+void bch_bset_fix_invalidated_key(struct btree *, struct bkey *);
+void bch_bset_fix_lookup_table(struct btree *, struct bkey *);
+
+struct bkey *__bch_bset_search(struct btree *, struct bset_tree *,
+			   const struct bkey *);
+
+static inline struct bkey *bch_bset_search(struct btree *b, struct bset_tree *t,
+					   const struct bkey *search)
+{
+	return search ? __bch_bset_search(b, t, search) : t->data->start;
+}
+
+bool bch_bkey_try_merge(struct btree *, struct bkey *, struct bkey *);
+void bch_btree_sort_lazy(struct btree *);
+void bch_btree_sort_into(struct btree *, struct btree *);
+void bch_btree_sort_and_fix_extents(struct btree *, struct btree_iter *);
+void bch_btree_sort_partial(struct btree *, unsigned);
+
+static inline void bch_btree_sort(struct btree *b)
+{
+	bch_btree_sort_partial(b, 0);
+}
+
+int bch_bset_print_stats(struct cache_set *, char *);
+
+#endif