[media] move the dvb/frontends to drivers/media/dvb-frontends

Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 839 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/au8522_decoder.c b/drivers/media/dvb-frontends/au8522_decoder.c
new file mode 100644
index 00000000000..5243ba6295c
--- /dev/null
+++ b/drivers/media/dvb-frontends/au8522_decoder.c
@@ -0,0 +1,839 @@
+/*
+ * Auvitek AU8522 QAM/8VSB demodulator driver and video decoder
+ *
+ * Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org>
+ * Copyright (C) 2005-2008 Auvitek International, Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * As published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/* Developer notes:
+ *
+ * VBI support is not yet working
+ * Enough is implemented here for CVBS and S-Video inputs, but the actual
+ *  analog demodulator code isn't implemented (not needed for xc5000 since it
+ *  has its own demodulator and outputs CVBS)
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-device.h>
+#include "au8522.h"
+#include "au8522_priv.h"
+
+MODULE_AUTHOR("Devin Heitmueller");
+MODULE_LICENSE("GPL");
+
+static int au8522_analog_debug;
+
+
+module_param_named(analog_debug, au8522_analog_debug, int, 0644);
+
+MODULE_PARM_DESC(analog_debug,
+		 "Analog debugging messages [0=Off (default) 1=On]");
+
+struct au8522_register_config {
+	u16 reg_name;
+	u8 reg_val[8];
+};
+
+
+/* Video Decoder Filter Coefficients
+   The values are as follows from left to right
+   0="ATV RF" 1="ATV RF13" 2="CVBS" 3="S-Video" 4="PAL" 5=CVBS13" 6="SVideo13"
+*/
+static const struct au8522_register_config filter_coef[] = {
+	{AU8522_FILTER_COEF_R410, {0x25, 0x00, 0x25, 0x25, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R411, {0x20, 0x00, 0x20, 0x20, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R412, {0x03, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R413, {0xe6, 0x00, 0xe6, 0xe6, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R414, {0x40, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R415, {0x1b, 0x00, 0x1b, 0x1b, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R416, {0xc0, 0x00, 0xc0, 0x04, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R417, {0x04, 0x00, 0x04, 0x04, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R418, {0x8c, 0x00, 0x8c, 0x8c, 0x00, 0x00, 0x00} },
+	{AU8522_FILTER_COEF_R419, {0xa0, 0x40, 0xa0, 0xa0, 0x40, 0x40, 0x40} },
+	{AU8522_FILTER_COEF_R41A, {0x21, 0x09, 0x21, 0x21, 0x09, 0x09, 0x09} },
+	{AU8522_FILTER_COEF_R41B, {0x6c, 0x38, 0x6c, 0x6c, 0x38, 0x38, 0x38} },
+	{AU8522_FILTER_COEF_R41C, {0x03, 0xff, 0x03, 0x03, 0xff, 0xff, 0xff} },
+	{AU8522_FILTER_COEF_R41D, {0xbf, 0xc7, 0xbf, 0xbf, 0xc7, 0xc7, 0xc7} },
+	{AU8522_FILTER_COEF_R41E, {0xa0, 0xdf, 0xa0, 0xa0, 0xdf, 0xdf, 0xdf} },
+	{AU8522_FILTER_COEF_R41F, {0x10, 0x06, 0x10, 0x10, 0x06, 0x06, 0x06} },
+	{AU8522_FILTER_COEF_R420, {0xae, 0x30, 0xae, 0xae, 0x30, 0x30, 0x30} },
+	{AU8522_FILTER_COEF_R421, {0xc4, 0x01, 0xc4, 0xc4, 0x01, 0x01, 0x01} },
+	{AU8522_FILTER_COEF_R422, {0x54, 0xdd, 0x54, 0x54, 0xdd, 0xdd, 0xdd} },
+	{AU8522_FILTER_COEF_R423, {0xd0, 0xaf, 0xd0, 0xd0, 0xaf, 0xaf, 0xaf} },
+	{AU8522_FILTER_COEF_R424, {0x1c, 0xf7, 0x1c, 0x1c, 0xf7, 0xf7, 0xf7} },
+	{AU8522_FILTER_COEF_R425, {0x76, 0xdb, 0x76, 0x76, 0xdb, 0xdb, 0xdb} },
+	{AU8522_FILTER_COEF_R426, {0x61, 0xc0, 0x61, 0x61, 0xc0, 0xc0, 0xc0} },
+	{AU8522_FILTER_COEF_R427, {0xd1, 0x2f, 0xd1, 0xd1, 0x2f, 0x2f, 0x2f} },
+	{AU8522_FILTER_COEF_R428, {0x84, 0xd8, 0x84, 0x84, 0xd8, 0xd8, 0xd8} },
+	{AU8522_FILTER_COEF_R429, {0x06, 0xfb, 0x06, 0x06, 0xfb, 0xfb, 0xfb} },
+	{AU8522_FILTER_COEF_R42A, {0x21, 0xd5, 0x21, 0x21, 0xd5, 0xd5, 0xd5} },
+	{AU8522_FILTER_COEF_R42B, {0x0a, 0x3e, 0x0a, 0x0a, 0x3e, 0x3e, 0x3e} },
+	{AU8522_FILTER_COEF_R42C, {0xe6, 0x15, 0xe6, 0xe6, 0x15, 0x15, 0x15} },
+	{AU8522_FILTER_COEF_R42D, {0x01, 0x34, 0x01, 0x01, 0x34, 0x34, 0x34} },
+
+};
+#define NUM_FILTER_COEF (sizeof(filter_coef)\
+			 / sizeof(struct au8522_register_config))
+
+
+/* Registers 0x060b through 0x0652 are the LP Filter coefficients
+   The values are as follows from left to right
+   0="SIF" 1="ATVRF/ATVRF13"
+   Note: the "ATVRF/ATVRF13" mode has never been tested
+*/
+static const struct au8522_register_config lpfilter_coef[] = {
+	{0x060b, {0x21, 0x0b} },
+	{0x060c, {0xad, 0xad} },
+	{0x060d, {0x70, 0xf0} },
+	{0x060e, {0xea, 0xe9} },
+	{0x060f, {0xdd, 0xdd} },
+	{0x0610, {0x08, 0x64} },
+	{0x0611, {0x60, 0x60} },
+	{0x0612, {0xf8, 0xb2} },
+	{0x0613, {0x01, 0x02} },
+	{0x0614, {0xe4, 0xb4} },
+	{0x0615, {0x19, 0x02} },
+	{0x0616, {0xae, 0x2e} },
+	{0x0617, {0xee, 0xc5} },
+	{0x0618, {0x56, 0x56} },
+	{0x0619, {0x30, 0x58} },
+	{0x061a, {0xf9, 0xf8} },
+	{0x061b, {0x24, 0x64} },
+	{0x061c, {0x07, 0x07} },
+	{0x061d, {0x30, 0x30} },
+	{0x061e, {0xa9, 0xed} },
+	{0x061f, {0x09, 0x0b} },
+	{0x0620, {0x42, 0xc2} },
+	{0x0621, {0x1d, 0x2a} },
+	{0x0622, {0xd6, 0x56} },
+	{0x0623, {0x95, 0x8b} },
+	{0x0624, {0x2b, 0x2b} },
+	{0x0625, {0x30, 0x24} },
+	{0x0626, {0x3e, 0x3e} },
+	{0x0627, {0x62, 0xe2} },
+	{0x0628, {0xe9, 0xf5} },
+	{0x0629, {0x99, 0x19} },
+	{0x062a, {0xd4, 0x11} },
+	{0x062b, {0x03, 0x04} },
+	{0x062c, {0xb5, 0x85} },
+	{0x062d, {0x1e, 0x20} },
+	{0x062e, {0x2a, 0xea} },
+	{0x062f, {0xd7, 0xd2} },
+	{0x0630, {0x15, 0x15} },
+	{0x0631, {0xa3, 0xa9} },
+	{0x0632, {0x1f, 0x1f} },
+	{0x0633, {0xf9, 0xd1} },
+	{0x0634, {0xc0, 0xc3} },
+	{0x0635, {0x4d, 0x8d} },
+	{0x0636, {0x21, 0x31} },
+	{0x0637, {0x83, 0x83} },
+	{0x0638, {0x08, 0x8c} },
+	{0x0639, {0x19, 0x19} },
+	{0x063a, {0x45, 0xa5} },
+	{0x063b, {0xef, 0xec} },
+	{0x063c, {0x8a, 0x8a} },
+	{0x063d, {0xf4, 0xf6} },
+	{0x063e, {0x8f, 0x8f} },
+	{0x063f, {0x44, 0x0c} },
+	{0x0640, {0xef, 0xf0} },
+	{0x0641, {0x66, 0x66} },
+	{0x0642, {0xcc, 0xd2} },
+	{0x0643, {0x41, 0x41} },
+	{0x0644, {0x63, 0x93} },
+	{0x0645, {0x8e, 0x8e} },
+	{0x0646, {0xa2, 0x42} },
+	{0x0647, {0x7b, 0x7b} },
+	{0x0648, {0x04, 0x04} },
+	{0x0649, {0x00, 0x00} },
+	{0x064a, {0x40, 0x40} },
+	{0x064b, {0x8c, 0x98} },
+	{0x064c, {0x00, 0x00} },
+	{0x064d, {0x63, 0xc3} },
+	{0x064e, {0x04, 0x04} },
+	{0x064f, {0x20, 0x20} },
+	{0x0650, {0x00, 0x00} },
+	{0x0651, {0x40, 0x40} },
+	{0x0652, {0x01, 0x01} },
+};
+#define NUM_LPFILTER_COEF (sizeof(lpfilter_coef)\
+			   / sizeof(struct au8522_register_config))
+
+static inline struct au8522_state *to_state(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct au8522_state, sd);
+}
+
+static void setup_vbi(struct au8522_state *state, int aud_input)
+{
+	int i;
+
+	/* These are set to zero regardless of what mode we're in */
+	au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_H_REG017H, 0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_L_REG018H, 0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_TOTAL_BITS_REG019H, 0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_TUNIT_H_REG01AH, 0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_TUNIT_L_REG01BH, 0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_THRESH1_REG01CH, 0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT2_REG01EH, 0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT1_REG01FH, 0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT0_REG020H, 0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK2_REG021H,
+			0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK1_REG022H,
+			0x00);
+	au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK0_REG023H,
+			0x00);
+
+	/* Setup the VBI registers */
+	for (i = 0x30; i < 0x60; i++)
+		au8522_writereg(state, i, 0x40);
+
+	/* For some reason, every register is 0x40 except register 0x44
+	   (confirmed via the HVR-950q USB capture) */
+	au8522_writereg(state, 0x44, 0x60);
+
+	/* Enable VBI (we always do this regardless of whether the user is
+	   viewing closed caption info) */
+	au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_H_REG017H,
+			AU8522_TVDEC_VBI_CTRL_H_REG017H_CCON);
+
+}
+
+static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode)
+{
+	int i;
+	int filter_coef_type;
+
+	/* Provide reasonable defaults for picture tuning values */
+	au8522_writereg(state, AU8522_TVDEC_SHARPNESSREG009H, 0x07);
+	au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, 0xed);
+	state->brightness = 0xed - 128;
+	au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, 0x79);
+	state->contrast = 0x79;
+	au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, 0x80);
+	au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, 0x80);
+	state->saturation = 0x80;
+	au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, 0x00);
+	au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, 0x00);
+	state->hue = 0x00;
+
+	/* Other decoder registers */
+	au8522_writereg(state, AU8522_TVDEC_INT_MASK_REG010H, 0x00);
+
+	if (input_mode == 0x23) {
+		/* S-Video input mapping */
+		au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x04);
+	} else {
+		/* All other modes (CVBS/ATVRF etc.) */
+		au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x00);
+	}
+
+	au8522_writereg(state, AU8522_TVDEC_PGA_REG012H,
+			AU8522_TVDEC_PGA_REG012H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_COMB_MODE_REG015H,
+			AU8522_TVDEC_COMB_MODE_REG015H_CVBS);
+	au8522_writereg(state, AU8522_TVDED_DBG_MODE_REG060H,
+			AU8522_TVDED_DBG_MODE_REG060H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL1_REG061H,
+			AU8522_TVDEC_FORMAT_CTRL1_REG061H_FIELD_LEN_525 |
+			AU8522_TVDEC_FORMAT_CTRL1_REG061H_LINE_LEN_63_492 |
+			AU8522_TVDEC_FORMAT_CTRL1_REG061H_SUBCARRIER_NTSC_MN);
+	au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL2_REG062H,
+			AU8522_TVDEC_FORMAT_CTRL2_REG062H_STD_NTSC);
+	au8522_writereg(state, AU8522_TVDEC_VCR_DET_LLIM_REG063H,
+			AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_VCR_DET_HLIM_REG064H,
+			AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR1_REG065H,
+			AU8522_TVDEC_COMB_VDIF_THR1_REG065H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR2_REG066H,
+			AU8522_TVDEC_COMB_VDIF_THR2_REG066H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR3_REG067H,
+			AU8522_TVDEC_COMB_VDIF_THR3_REG067H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_COMB_NOTCH_THR_REG068H,
+			AU8522_TVDEC_COMB_NOTCH_THR_REG068H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR1_REG069H,
+			AU8522_TVDEC_COMB_HDIF_THR1_REG069H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR2_REG06AH,
+			AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR3_REG06BH,
+			AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS);
+	if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 ||
+	    input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) {
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
+				AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO);
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
+				AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO);
+	} else {
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
+				AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS);
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
+				AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS);
+	}
+	au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH,
+			AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_UV_SEP_THR_REG06FH,
+			AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H,
+			AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS);
+	au8522_writereg(state, AU8522_REG071H, AU8522_REG071H_CVBS);
+	au8522_writereg(state, AU8522_REG072H, AU8522_REG072H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H,
+			AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H_CVBS);
+	au8522_writereg(state, AU8522_REG074H, AU8522_REG074H_CVBS);
+	au8522_writereg(state, AU8522_REG075H, AU8522_REG075H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_DCAGC_CTRL_REG077H,
+			AU8522_TVDEC_DCAGC_CTRL_REG077H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_PIC_START_ADJ_REG078H,
+			AU8522_TVDEC_PIC_START_ADJ_REG078H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H,
+			AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH,
+			AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_INTRP_CTRL_REG07BH,
+			AU8522_TVDEC_INTRP_CTRL_REG07BH_CVBS);
+	au8522_writereg(state, AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H,
+			AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H_CVBS);
+	au8522_writereg(state, AU8522_TOREGAAGC_REG0E5H,
+			AU8522_TOREGAAGC_REG0E5H_CVBS);
+	au8522_writereg(state, AU8522_REG016H, AU8522_REG016H_CVBS);
+
+	setup_vbi(state, 0);
+
+	if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 ||
+	    input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) {
+		/* Despite what the table says, for the HVR-950q we still need
+		   to be in CVBS mode for the S-Video input (reason unknown). */
+		/* filter_coef_type = 3; */
+		filter_coef_type = 5;
+	} else {
+		filter_coef_type = 5;
+	}
+
+	/* Load the Video Decoder Filter Coefficients */
+	for (i = 0; i < NUM_FILTER_COEF; i++) {
+		au8522_writereg(state, filter_coef[i].reg_name,
+				filter_coef[i].reg_val[filter_coef_type]);
+	}
+
+	/* It's not clear what these registers are for, but they are always
+	   set to the same value regardless of what mode we're in */
+	au8522_writereg(state, AU8522_REG42EH, 0x87);
+	au8522_writereg(state, AU8522_REG42FH, 0xa2);
+	au8522_writereg(state, AU8522_REG430H, 0xbf);
+	au8522_writereg(state, AU8522_REG431H, 0xcb);
+	au8522_writereg(state, AU8522_REG432H, 0xa1);
+	au8522_writereg(state, AU8522_REG433H, 0x41);
+	au8522_writereg(state, AU8522_REG434H, 0x88);
+	au8522_writereg(state, AU8522_REG435H, 0xc2);
+	au8522_writereg(state, AU8522_REG436H, 0x3c);
+}
+
+static void au8522_setup_cvbs_mode(struct au8522_state *state)
+{
+	/* here we're going to try the pre-programmed route */
+	au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
+			AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
+
+	/* PGA in automatic mode */
+	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
+
+	/* Enable clamping control */
+	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
+
+	au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
+			AU8522_INPUT_CONTROL_REG081H_CVBS_CH1);
+
+	setup_decoder_defaults(state, AU8522_INPUT_CONTROL_REG081H_CVBS_CH1);
+
+	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
+			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
+}
+
+static void au8522_setup_cvbs_tuner_mode(struct au8522_state *state)
+{
+	/* here we're going to try the pre-programmed route */
+	au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
+			AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
+
+	/* It's not clear why we have to have the PGA in automatic mode while
+	   enabling clamp control, but it's what Windows does */
+	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
+
+	/* Enable clamping control */
+	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x0e);
+
+	/* Disable automatic PGA (since the CVBS is coming from the tuner) */
+	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x10);
+
+	/* Set input mode to CVBS on channel 4 with SIF audio input enabled */
+	au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
+			AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF);
+
+	setup_decoder_defaults(state,
+			       AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF);
+
+	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
+			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
+}
+
+static void au8522_setup_svideo_mode(struct au8522_state *state)
+{
+	au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
+			AU8522_MODULE_CLOCK_CONTROL_REG0A3H_SVIDEO);
+
+	/* Set input to Y on Channe1, C on Channel 3 */
+	au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
+			AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13);
+
+	/* PGA in automatic mode */
+	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
+
+	/* Enable clamping control */
+	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
+
+	setup_decoder_defaults(state,
+			       AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13);
+
+	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
+			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static void disable_audio_input(struct au8522_state *state)
+{
+	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00);
+	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00);
+	au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00);
+
+	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x04);
+	au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0x02);
+
+	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
+			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO);
+}
+
+/* 0=disable, 1=SIF */
+static void set_audio_input(struct au8522_state *state, int aud_input)
+{
+	int i;
+
+	/* Note that this function needs to be used in conjunction with setting
+	   the input routing via register 0x81 */
+
+	if (aud_input == AU8522_AUDIO_NONE) {
+		disable_audio_input(state);
+		return;
+	}
+
+	if (aud_input != AU8522_AUDIO_SIF) {
+		/* The caller asked for a mode we don't currently support */
+		printk(KERN_ERR "Unsupported audio mode requested! mode=%d\n",
+		       aud_input);
+		return;
+	}
+
+	/* Load the Audio Decoder Filter Coefficients */
+	for (i = 0; i < NUM_LPFILTER_COEF; i++) {
+		au8522_writereg(state, lpfilter_coef[i].reg_name,
+				lpfilter_coef[i].reg_val[0]);
+	}
+
+	/* Setup audio */
+	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00);
+	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00);
+	au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00);
+	au8522_writereg(state, AU8522_I2C_CONTROL_REG1_REG091H, 0x80);
+	au8522_writereg(state, AU8522_I2C_CONTROL_REG0_REG090H, 0x84);
+	msleep(150);
+	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x00);
+	msleep(1);
+	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x9d);
+	msleep(50);
+	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F);
+	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F);
+	au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0xff);
+	msleep(80);
+	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F);
+	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F);
+	au8522_writereg(state, AU8522_REG0F9H, AU8522_REG0F9H_AUDIO);
+	au8522_writereg(state, AU8522_AUDIO_MODE_REG0F1H, 0x82);
+	msleep(70);
+	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x09);
+	au8522_writereg(state, AU8522_AUDIOFREQ_REG606H, 0x03);
+	au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0xc2);
+}
+
+/* ----------------------------------------------------------------------- */
+
+static int au8522_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct au8522_state *state = to_state(sd);
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		state->brightness = ctrl->value;
+		au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH,
+				ctrl->value - 128);
+		break;
+	case V4L2_CID_CONTRAST:
+		state->contrast = ctrl->value;
+		au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH,
+				ctrl->value);
+		break;
+	case V4L2_CID_SATURATION:
+		state->saturation = ctrl->value;
+		au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH,
+				ctrl->value);
+		au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH,
+				ctrl->value);
+		break;
+	case V4L2_CID_HUE:
+		state->hue = ctrl->value;
+		au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH,
+				ctrl->value >> 8);
+		au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH,
+				ctrl->value & 0xFF);
+		break;
+	case V4L2_CID_AUDIO_VOLUME:
+	case V4L2_CID_AUDIO_BASS:
+	case V4L2_CID_AUDIO_TREBLE:
+	case V4L2_CID_AUDIO_BALANCE:
+	case V4L2_CID_AUDIO_MUTE:
+		/* Not yet implemented */
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int au8522_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct au8522_state *state = to_state(sd);
+
+	/* Note that we are using values cached in the state structure instead
+	   of reading the registers due to issues with i2c reads not working
+	   properly/consistently yet on the HVR-950q */
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		ctrl->value = state->brightness;
+		break;
+	case V4L2_CID_CONTRAST:
+		ctrl->value = state->contrast;
+		break;
+	case V4L2_CID_SATURATION:
+		ctrl->value = state->saturation;
+		break;
+	case V4L2_CID_HUE:
+		ctrl->value = state->hue;
+		break;
+	case V4L2_CID_AUDIO_VOLUME:
+	case V4L2_CID_AUDIO_BASS:
+	case V4L2_CID_AUDIO_TREBLE:
+	case V4L2_CID_AUDIO_BALANCE:
+	case V4L2_CID_AUDIO_MUTE:
+		/* Not yet supported */
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int au8522_g_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct au8522_state *state = to_state(sd);
+
+	if (!v4l2_chip_match_i2c_client(client, &reg->match))
+		return -EINVAL;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	reg->val = au8522_readreg(state, reg->reg & 0xffff);
+	return 0;
+}
+
+static int au8522_s_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct au8522_state *state = to_state(sd);
+
+	if (!v4l2_chip_match_i2c_client(client, &reg->match))
+		return -EINVAL;
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	au8522_writereg(state, reg->reg, reg->val & 0xff);
+	return 0;
+}
+#endif
+
+static int au8522_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct au8522_state *state = to_state(sd);
+
+	if (enable) {
+		au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
+				0x01);
+		msleep(1);
+		au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
+				AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
+	} else {
+		/* This does not completely power down the device
+		   (it only reduces it from around 140ma to 80ma) */
+		au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
+				1 << 5);
+	}
+	return 0;
+}
+
+static int au8522_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+	switch (qc->id) {
+	case V4L2_CID_CONTRAST:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1,
+					    AU8522_TVDEC_CONTRAST_REG00BH_CVBS);
+	case V4L2_CID_BRIGHTNESS:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 109);
+	case V4L2_CID_SATURATION:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
+	case V4L2_CID_HUE:
+		return v4l2_ctrl_query_fill(qc, -32768, 32768, 1, 0);
+	default:
+		break;
+	}
+
+	qc->type = 0;
+	return -EINVAL;
+}
+
+static int au8522_reset(struct v4l2_subdev *sd, u32 val)
+{
+	struct au8522_state *state = to_state(sd);
+
+	state->operational_mode = AU8522_ANALOG_MODE;
+
+	/* Clear out any state associated with the digital side of the
+	   chip, so that when it gets powered back up it won't think
+	   that it is already tuned */
+	state->current_frequency = 0;
+
+	au8522_writereg(state, 0xa4, 1 << 5);
+
+	return 0;
+}
+
+static int au8522_s_video_routing(struct v4l2_subdev *sd,
+					u32 input, u32 output, u32 config)
+{
+	struct au8522_state *state = to_state(sd);
+
+	au8522_reset(sd, 0);
+
+	if (input == AU8522_COMPOSITE_CH1) {
+		au8522_setup_cvbs_mode(state);
+	} else if (input == AU8522_SVIDEO_CH13) {
+		au8522_setup_svideo_mode(state);
+	} else if (input == AU8522_COMPOSITE_CH4_SIF) {
+		au8522_setup_cvbs_tuner_mode(state);
+	} else {
+		printk(KERN_ERR "au8522 mode not currently supported\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int au8522_s_audio_routing(struct v4l2_subdev *sd,
+					u32 input, u32 output, u32 config)
+{
+	struct au8522_state *state = to_state(sd);
+	set_audio_input(state, input);
+	return 0;
+}
+
+static int au8522_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
+{
+	int val = 0;
+	struct au8522_state *state = to_state(sd);
+	u8 lock_status;
+
+	/* Interrogate the decoder to see if we are getting a real signal */
+	lock_status = au8522_readreg(state, 0x00);
+	if (lock_status == 0xa2)
+		vt->signal = 0xffff;
+	else
+		vt->signal = 0x00;
+
+	vt->capability |=
+		V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
+		V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
+
+	val = V4L2_TUNER_SUB_MONO;
+	vt->rxsubchans = val;
+	vt->audmode = V4L2_TUNER_MODE_STEREO;
+	return 0;
+}
+
+static int au8522_g_chip_ident(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_chip_ident *chip)
+{
+	struct au8522_state *state = to_state(sd);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	return v4l2_chip_ident_i2c_client(client, chip, state->id, state->rev);
+}
+
+static int au8522_log_status(struct v4l2_subdev *sd)
+{
+	/* FIXME: Add some status info here */
+	return 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct v4l2_subdev_core_ops au8522_core_ops = {
+	.log_status = au8522_log_status,
+	.g_chip_ident = au8522_g_chip_ident,
+	.g_ctrl = au8522_g_ctrl,
+	.s_ctrl = au8522_s_ctrl,
+	.queryctrl = au8522_queryctrl,
+	.reset = au8522_reset,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register = au8522_g_register,
+	.s_register = au8522_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_tuner_ops au8522_tuner_ops = {
+	.g_tuner = au8522_g_tuner,
+};
+
+static const struct v4l2_subdev_audio_ops au8522_audio_ops = {
+	.s_routing = au8522_s_audio_routing,
+};
+
+static const struct v4l2_subdev_video_ops au8522_video_ops = {
+	.s_routing = au8522_s_video_routing,
+	.s_stream = au8522_s_stream,
+};
+
+static const struct v4l2_subdev_ops au8522_ops = {
+	.core = &au8522_core_ops,
+	.tuner = &au8522_tuner_ops,
+	.audio = &au8522_audio_ops,
+	.video = &au8522_video_ops,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static int au8522_probe(struct i2c_client *client,
+			const struct i2c_device_id *did)
+{
+	struct au8522_state *state;
+	struct v4l2_subdev *sd;
+	int instance;
+	struct au8522_config *demod_config;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA)) {
+		return -EIO;
+	}
+
+	/* allocate memory for the internal state */
+	instance = au8522_get_state(&state, client->adapter, client->addr);
+	switch (instance) {
+	case 0:
+		printk(KERN_ERR "au8522_decoder allocation failed\n");
+		return -EIO;
+	case 1:
+		/* new demod instance */
+		printk(KERN_INFO "au8522_decoder creating new instance...\n");
+		break;
+	default:
+		/* existing demod instance */
+		printk(KERN_INFO "au8522_decoder attach existing instance.\n");
+		break;
+	}
+
+	demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL);
+	if (demod_config == NULL) {
+		if (instance == 1)
+			kfree(state);
+		return -ENOMEM;
+	}
+	demod_config->demod_address = 0x8e >> 1;
+
+	state->config = demod_config;
+	state->i2c = client->adapter;
+
+	sd = &state->sd;
+	v4l2_i2c_subdev_init(sd, client, &au8522_ops);
+
+	state->c = client;
+	state->vid_input = AU8522_COMPOSITE_CH1;
+	state->aud_input = AU8522_AUDIO_NONE;
+	state->id = 8522;
+	state->rev = 0;
+
+	/* Jam open the i2c gate to the tuner */
+	au8522_writereg(state, 0x106, 1);
+
+	return 0;
+}
+
+static int au8522_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	v4l2_device_unregister_subdev(sd);
+	au8522_release_state(to_state(sd));
+	return 0;
+}
+
+static const struct i2c_device_id au8522_id[] = {
+	{"au8522", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, au8522_id);
+
+static struct i2c_driver au8522_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "au8522",
+	},
+	.probe		= au8522_probe,
+	.remove		= au8522_remove,
+	.id_table	= au8522_id,
+};
+
+module_i2c_driver(au8522_driver);