[media] move the dvb/frontends to drivers/media/dvb-frontends

Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 75 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/lnbp21.h b/drivers/media/dvb-frontends/lnbp21.h
new file mode 100644
index 00000000000..fcdf1c650dd
--- /dev/null
+++ b/drivers/media/dvb-frontends/lnbp21.h
@@ -0,0 +1,75 @@
+/*
+ * lnbp21.h - driver for lnb supply and control ic lnbp21
+ *
+ * Copyright (C) 2006 Oliver Endriss
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+
+#ifndef _LNBP21_H
+#define _LNBP21_H
+
+/* system register bits */
+/* [RO] 0=OK; 1=over current limit flag */
+#define LNBP21_OLF	0x01
+/* [RO] 0=OK; 1=over temperature flag (150 C) */
+#define LNBP21_OTF	0x02
+/* [RW] 0=disable LNB power, enable loopthrough
+	1=enable LNB power, disable loopthrough */
+#define LNBP21_EN	0x04
+/* [RW] 0=low voltage (13/14V, vert pol)
+	1=high voltage (18/19V,horiz pol) */
+#define LNBP21_VSEL	0x08
+/* [RW] increase LNB voltage by 1V:
+	0=13/18V; 1=14/19V */
+#define LNBP21_LLC	0x10
+/* [RW] 0=tone controlled by DSQIN pin
+	1=tone enable, disable DSQIN */
+#define LNBP21_TEN	0x20
+/* [RW] current limit select:
+	0:Iout=500-650mA Isc=300mA
+	1:Iout=400-550mA Isc=200mA */
+#define LNBP21_ISEL	0x40
+/* [RW] short-circuit protect:
+	0=pulsed (dynamic) curr limiting
+	1=static curr limiting */
+#define LNBP21_PCL	0x80
+
+#include <linux/dvb/frontend.h>
+
+#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) \
+							&& defined(MODULE))
+/* override_set and override_clear control which
+ system register bits (above) to always set & clear */
+extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe,
+				struct i2c_adapter *i2c, u8 override_set,
+				u8 override_clear);
+#else
+static inline struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe,
+				struct i2c_adapter *i2c, u8 override_set,
+				u8 override_clear)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif