diff options
author | Mauro Carvalho Chehab <mchehab@redhat.com> | 2013-01-17 20:10:47 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2013-01-24 14:24:59 -0200 |
commit | 593ae89a3f2ea69b0cffb8d8ca63549c6c02ec19 (patch) | |
tree | 9a9c5eeefc9adeadf692a2cdef9ce03be5d4ba30 /drivers/media/dvb-frontends | |
parent | 94a93e5f85040114d6a77c085457b3943b6da889 (diff) |
[media] mb86a20s: add block count measures (PER/UCB)
Add both per-layer and global block error count and block count,
for PER and UCB measurements.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/dvb-frontends')
-rw-r--r-- | drivers/media/dvb-frontends/mb86a20s.c | 190 |
1 files changed, 180 insertions, 10 deletions
diff --git a/drivers/media/dvb-frontends/mb86a20s.c b/drivers/media/dvb-frontends/mb86a20s.c index 4f3e222a2bc..c5c2c49ea99 100644 --- a/drivers/media/dvb-frontends/mb86a20s.c +++ b/drivers/media/dvb-frontends/mb86a20s.c @@ -111,13 +111,21 @@ static struct regdata mb86a20s_init[] = { { 0x50, 0xdf }, { 0x51, 0xf4 }, { 0x50, 0xe0 }, { 0x51, 0x01 }, { 0x50, 0xe1 }, { 0x51, 0xf4 }, - { 0x50, 0xb0 }, { 0x51, 0x07 }, - { 0x50, 0xb2 }, { 0x51, 0xff }, - { 0x50, 0xb3 }, { 0x51, 0xff }, - { 0x50, 0xb4 }, { 0x51, 0xff }, - { 0x50, 0xb5 }, { 0x51, 0xff }, - { 0x50, 0xb6 }, { 0x51, 0xff }, - { 0x50, 0xb7 }, { 0x51, 0xff }, + + /* + * On this demod, when the block count reaches the count below, + * it collects the block error count. The block counters are initialized + * to 127 here. This warrants that all of them will be quickly + * calculated when device gets locked. As TMCC is parsed, the values + * will be adjusted later in the driver's code. + */ + { 0x50, 0xb0 }, { 0x51, 0x07 }, /* Enable PER */ + { 0x50, 0xb2 }, { 0x51, 0x00 }, + { 0x50, 0xb3 }, { 0x51, 0x7f }, + { 0x50, 0xb4 }, { 0x51, 0x00 }, + { 0x50, 0xb5 }, { 0x51, 0x7f }, + { 0x50, 0xb6 }, { 0x51, 0x00 }, + { 0x50, 0xb7 }, { 0x51, 0x7f }, { 0x50, 0x50 }, { 0x51, 0x02 }, /* MER manual mode */ { 0x50, 0x51 }, { 0x51, 0x04 }, /* MER symbol 4 */ @@ -893,6 +901,123 @@ static int mb86a20s_get_ber_before_vterbi(struct dvb_frontend *fe, return 0; } +static int mb86a20s_get_blk_error(struct dvb_frontend *fe, + unsigned layer, + u32 *error, u32 *count) +{ + struct mb86a20s_state *state = fe->demodulator_priv; + int rc; + u32 collect_rate; + dev_dbg(&state->i2c->dev, "%s called.\n", __func__); + + if (layer >= 3) + return -EINVAL; + + /* Check if the PER measures are already available */ + rc = mb86a20s_writereg(state, 0x50, 0xb8); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + + /* Check if data is available for that layer */ + + if (!(rc & (1 << layer))) { + dev_dbg(&state->i2c->dev, + "%s: block counts for layer %c aren't available yet.\n", + __func__, 'A' + layer); + return -EBUSY; + } + + /* Read Packet error Count */ + rc = mb86a20s_writereg(state, 0x50, 0xb9 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *error = rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0xba + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *error |= rc; + dev_err(&state->i2c->dev, "%s: block error for layer %c: %d.\n", + __func__, 'A' + layer, *error); + + /* Read Bit Count */ + rc = mb86a20s_writereg(state, 0x50, 0xb2 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count = rc << 8; + rc = mb86a20s_writereg(state, 0x50, 0xb3 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_readreg(state, 0x51); + if (rc < 0) + return rc; + *count |= rc; + + dev_dbg(&state->i2c->dev, + "%s: block count for layer %c: %d.\n", + __func__, 'A' + layer, *count); + + /* + * As we get TMCC data from the frontend, we can better estimate the + * BER bit counters, in order to do the BER measure during a longer + * time. Use those data, if available, to update the bit count + * measure. + */ + + if (!state->estimated_rate[layer]) + goto reset_measurement; + + collect_rate = state->estimated_rate[layer] / 204 / 8; + + if (collect_rate < 32) + collect_rate = 32; + if (collect_rate > 65535) + collect_rate = 65535; + + if (collect_rate != *count) { + dev_dbg(&state->i2c->dev, + "%s: updating PER counter on layer %c to %d.\n", + __func__, 'A' + layer, collect_rate); + rc = mb86a20s_writereg(state, 0x50, 0xb2 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate >> 8); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x50, 0xb3 + layer * 2); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, collect_rate & 0xff); + if (rc < 0) + return rc; + } + +reset_measurement: + /* Reset counter to collect new data */ + rc = mb86a20s_writereg(state, 0x50, 0xb1); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, (1 << layer)); + if (rc < 0) + return rc; + rc = mb86a20s_writereg(state, 0x51, 0x00); + if (rc < 0) + return rc; + + return 0; +} + struct linear_segments { unsigned x, y; }; @@ -1115,7 +1240,7 @@ static int mb86a20s_get_main_CNR(struct dvb_frontend *fe) return rc; } -static int mb86a20s_get_per_layer_CNR(struct dvb_frontend *fe) +static int mb86a20s_get_blk_error_layer_CNR(struct dvb_frontend *fe) { struct mb86a20s_state *state = fe->demodulator_priv; struct dtv_frontend_properties *c = &fe->dtv_property_cache; @@ -1258,14 +1383,16 @@ static int mb86a20s_get_stats(struct dvb_frontend *fe) int rc = 0, i; u32 bit_error = 0, bit_count = 0; u32 t_pre_bit_error = 0, t_pre_bit_count = 0; - int active_layers = 0, ber_layers = 0; + u32 block_error = 0, block_count = 0; + u32 t_block_error = 0, t_block_count = 0; + int active_layers = 0, ber_layers = 0, per_layers = 0; dev_dbg(&state->i2c->dev, "%s called.\n", __func__); mb86a20s_get_main_CNR(fe); /* Get per-layer stats */ - mb86a20s_get_per_layer_CNR(fe); + mb86a20s_get_blk_error_layer_CNR(fe); for (i = 0; i < 3; i++) { if (c->isdbt_layer_enabled & (1 << i)) { @@ -1297,9 +1424,38 @@ static int mb86a20s_get_stats(struct dvb_frontend *fe) if (c->block_error.stat[1 + i].scale != FE_SCALE_NOT_AVAILABLE) ber_layers++; + /* Handle Block errors for PER/UCB reports */ + rc = mb86a20s_get_blk_error(fe, i, + &block_error, + &block_count); + if (rc >= 0) { + c->block_error.stat[1 + i].scale = FE_SCALE_COUNTER; + c->block_error.stat[1 + i].uvalue += block_error; + c->block_count.stat[1 + i].scale = FE_SCALE_COUNTER; + c->block_count.stat[1 + i].uvalue += block_count; + } else if (rc != -EBUSY) { + /* + * If an I/O error happened, + * measures are now unavailable + */ + c->block_error.stat[1 + i].scale = FE_SCALE_NOT_AVAILABLE; + c->block_count.stat[1 + i].scale = FE_SCALE_NOT_AVAILABLE; + dev_err(&state->i2c->dev, + "%s: Can't get PER for layer %c (error %d).\n", + __func__, 'A' + i, rc); + + } + + if (c->block_error.stat[1 + i].scale != FE_SCALE_NOT_AVAILABLE) + per_layers++; + /* Update total BER */ t_pre_bit_error += c->pre_bit_error.stat[1 + i].uvalue; t_pre_bit_count += c->pre_bit_count.stat[1 + i].uvalue; + + /* Update total PER */ + t_block_error += c->block_error.stat[1 + i].uvalue; + t_block_count += c->block_count.stat[1 + i].uvalue; } } @@ -1321,6 +1477,20 @@ static int mb86a20s_get_stats(struct dvb_frontend *fe) c->pre_bit_count.stat[0].uvalue = t_pre_bit_count; } + if (per_layers) { + /* + * At least one per-layer UCB measure was read. We can now + * calculate the total UCB + * + * Total block Error/Count is calculated as the sum of the + * block errors on all active layers. + */ + c->block_error.stat[0].scale = FE_SCALE_COUNTER; + c->block_error.stat[0].uvalue = t_block_error; + c->block_count.stat[0].scale = FE_SCALE_COUNTER; + c->block_count.stat[0].uvalue = t_block_count; + } + return rc; } |