diff options
author | Antti Palosaari <crope@iki.fi> | 2006-11-05 16:05:38 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@infradead.org> | 2007-02-21 13:35:30 -0200 |
commit | 5decdd2729066c5c155d0f6e7fdf89b844fbfc27 (patch) | |
tree | 8f5fcf1db45402f7c4247cb34aa9802a891fffb7 /drivers/media/dvb/dvb-usb/dvb-usb-ids.h | |
parent | 4131fd4fd40aa22cfe61b4e7c78e640b9fcfcd8c (diff) |
V4L/DVB (5236): Initial support for Sigmatek DVB-110 DVB-T
This patch adds driver for Sigmatek DVB-110 USB DVB-T stick. Stick has based
on hardware of Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE 6353)
demodulator and Alcor Micro AU6610 DVB-T USB controller. HW is rather similar
as used in MSI Megasky GL861.
Currently, the driver works only in USB 2.0. In my understanding USB 1.1 is
also supported by hw but I cannot test it due to lack of USB 1.1 port. Device
supports only isochronous mode transfers. There is also eeprom in usb
controller(at least in address range 0x80 - 0xbf) for storing data, eg.
firmware. Anyway, firmware loading is not used / required by the device.
There seems to be at least one unknown I2C device in address 0xa0, probably
remote control or GPIO. Windows drivers reads registers from 0x00 to 0x07
from this unknown address.
Driver is based on gl861 module. Tuner has a lot of problems to lock with
megasky qt1010 module with this hardware with some broadcasting standards.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers/media/dvb/dvb-usb/dvb-usb-ids.h')
-rw-r--r-- | drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index c3a42c19350..148386aba27 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -11,6 +11,7 @@ /* Vendor IDs */ #define USB_VID_ADSTECH 0x06e1 +#define USB_VID_ALCOR_MICRO 0x058f #define USB_VID_ANCHOR 0x0547 #define USB_VID_AVERMEDIA 0x07ca #define USB_VID_COMPRO 0x185b @@ -137,6 +138,7 @@ #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00 #define USB_PID_GENPIX_8PSK_COLD 0x0200 #define USB_PID_GENPIX_8PSK_WARM 0x0201 +#define USB_PID_SIGMATEK_DVB_110 0x6610 #endif |