[media] ec168: convert to new DVB USB

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 107 insertions, 152 deletions

diff --git a/drivers/media/dvb/dvb-usb/ec168.c b/drivers/media/dvb/dvb-usb/ec168.c
index b4989ba8897..864195a56af 100644
--- a/drivers/media/dvb/dvb-usb/ec168.c
+++ b/drivers/media/dvb/dvb-usb/ec168.c
@@ -29,17 +29,13 @@ module_param_named(debug, dvb_usb_ec168_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-static struct ec100_config ec168_ec100_config;
-
-static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req)
+static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
 {
 	int ret;
 	unsigned int pipe;
 	u8 request, requesttype;
 	u8 *buf;
 
-
-
 	switch (req->cmd) {
 	case DOWNLOAD_FIRMWARE:
 	case GPIO:
@@ -83,15 +79,15 @@ static int ec168_rw_udev(struct usb_device *udev, struct ec168_req *req)
 	if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) {
 		/* write */
 		memcpy(buf, req->data, req->size);
-		pipe = usb_sndctrlpipe(udev, 0);
+		pipe = usb_sndctrlpipe(d->udev, 0);
 	} else {
 		/* read */
-		pipe = usb_rcvctrlpipe(udev, 0);
+		pipe = usb_rcvctrlpipe(d->udev, 0);
 	}
 
 	msleep(1); /* avoid I2C errors */
 
-	ret = usb_control_msg(udev, pipe, request, requesttype, req->value,
+	ret = usb_control_msg(d->udev, pipe, request, requesttype, req->value,
 		req->index, buf, req->size, EC168_USB_TIMEOUT);
 
 	ec168_debug_dump(request, requesttype, req->value, req->index, buf,
@@ -116,12 +112,9 @@ error:
 	return ret;
 }
 
-static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req)
-{
-	return ec168_rw_udev(d->udev, req);
-}
-
 /* I2C */
+static struct ec100_config ec168_ec100_config;
+
 static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 	int num)
 {
@@ -181,7 +174,6 @@ error:
 	return i;
 }
 
-
 static u32 ec168_i2c_func(struct i2c_adapter *adapter)
 {
 	return I2C_FUNC_I2C;
@@ -193,56 +185,32 @@ static struct i2c_algorithm ec168_i2c_algo = {
 };
 
 /* Callbacks for DVB USB */
-static struct ec100_config ec168_ec100_config = {
-	.demod_address = 0xff, /* not real address, demod is integrated */
-};
-
-static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
+static int ec168_identify_state(struct dvb_usb_device *d)
 {
+	int ret;
+	u8 reply;
+	struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
 	deb_info("%s:\n", __func__);
-	adap->fe_adap[0].fe = dvb_attach(ec100_attach, &ec168_ec100_config,
-		&adap->dev->i2c_adap);
-	if (adap->fe_adap[0].fe == NULL)
-		return -ENODEV;
 
-	return 0;
-}
+	ret = ec168_ctrl_msg(d, &req);
+	if (ret)
+		goto error;
 
-static struct mxl5005s_config ec168_mxl5003s_config = {
-	.i2c_address     = 0xc6,
-	.if_freq         = IF_FREQ_4570000HZ,
-	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
-	.agc_mode        = MXL_SINGLE_AGC,
-	.tracking_filter = MXL_TF_OFF,
-	.rssi_enable     = MXL_RSSI_ENABLE,
-	.cap_select      = MXL_CAP_SEL_ENABLE,
-	.div_out         = MXL_DIV_OUT_4,
-	.clock_out       = MXL_CLOCK_OUT_DISABLE,
-	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
-	.top		 = MXL5005S_TOP_25P2,
-	.mod_mode        = MXL_DIGITAL_MODE,
-	.if_mode         = MXL_ZERO_IF,
-	.AgcMasterByte   = 0x00,
-};
+	deb_info("%s: reply:%02x\n", __func__, reply);
 
-static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
-{
-	deb_info("%s:\n", __func__);
-	return dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap,
-		&ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
-}
+	if (reply == 0x01)
+		ret = WARM;
+	else
+		ret = COLD;
 
-static int ec168_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
-	struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
-	deb_info("%s: onoff:%d\n", __func__, onoff);
-	if (onoff)
-		req.index = 0x0102;
-	return ec168_ctrl_msg(adap->dev, &req);
+	return ret;
+error:
+	deb_info("%s: failed:%d\n", __func__, ret);
+	return ret;
 }
 
-static int ec168_download_firmware(struct usb_device *udev,
-	const struct firmware *fw)
+static int ec168_download_firmware(struct dvb_usb_device *d,
+		const struct firmware *fw)
 {
 	int i, len, packets, remainder, ret;
 	u16 addr = 0x0000; /* firmware start address */
@@ -262,7 +230,7 @@ static int ec168_download_firmware(struct usb_device *udev,
 		req.index = addr;
 		addr += FW_PACKET_MAX_DATA;
 
-		ret = ec168_rw_udev(udev, &req);
+		ret = ec168_ctrl_msg(d, &req);
 		if (ret) {
 			err("firmware download failed:%d packet:%d", ret, i);
 			goto error;
@@ -274,7 +242,7 @@ static int ec168_download_firmware(struct usb_device *udev,
 	req.cmd = SET_CONFIG;
 	req.value = 0;
 	req.index = 0x0001;
-	ret = ec168_rw_udev(udev, &req);
+	ret = ec168_ctrl_msg(d, &req);
 	if (ret)
 		goto error;
 
@@ -282,7 +250,7 @@ static int ec168_download_firmware(struct usb_device *udev,
 	req.cmd = GPIO;
 	req.value = 0;
 	req.index = 0x0206;
-	ret = ec168_rw_udev(udev, &req);
+	ret = ec168_ctrl_msg(d, &req);
 	if (ret)
 		goto error;
 
@@ -290,7 +258,7 @@ static int ec168_download_firmware(struct usb_device *udev,
 	req.cmd = WRITE_I2C;
 	req.value = 0;
 	req.index = 0x00c6;
-	ret = ec168_rw_udev(udev, &req);
+	ret = ec168_ctrl_msg(d, &req);
 	if (ret)
 		goto error;
 
@@ -300,93 +268,76 @@ error:
 	return ret;
 }
 
-static int ec168_identify_state(struct usb_device *udev,
-	struct dvb_usb_device_properties *props,
-	struct dvb_usb_device_description **desc, int *cold)
+static struct ec100_config ec168_ec100_config = {
+	.demod_address = 0xff, /* not real address, demod is integrated */
+};
+
+static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	int ret;
-	u8 reply;
-	struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply};
 	deb_info("%s:\n", __func__);
+	adap->fe[0] = dvb_attach(ec100_attach, &ec168_ec100_config,
+		&adap->dev->i2c_adap);
+	if (adap->fe[0] == NULL)
+		return -ENODEV;
 
-	ret = ec168_rw_udev(udev, &req);
-	if (ret)
-		goto error;
-
-	deb_info("%s: reply:%02x\n", __func__, reply);
-
-	if (reply == 0x01)
-		*cold = 0;
-	else
-		*cold = 1;
-
-	return ret;
-error:
-	deb_info("%s: failed:%d\n", __func__, ret);
-	return ret;
+	return 0;
 }
 
-/* DVB USB Driver stuff */
-static struct dvb_usb_device_properties ec168_properties;
+static struct mxl5005s_config ec168_mxl5003s_config = {
+	.i2c_address     = 0xc6,
+	.if_freq         = IF_FREQ_4570000HZ,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_OFF,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
+};
 
-static int ec168_probe(struct usb_interface *intf,
-	const struct usb_device_id *id)
+static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
 {
-	int ret;
-	deb_info("%s: interface:%d\n", __func__,
-		intf->cur_altsetting->desc.bInterfaceNumber);
-
-	ret = dvb_usb_device_init(intf, &ec168_properties, THIS_MODULE, NULL,
-		adapter_nr);
-	if (ret)
-		goto error;
-
-	return ret;
-error:
-	deb_info("%s: failed:%d\n", __func__, ret);
-	return ret;
+	deb_info("%s:\n", __func__);
+	return dvb_attach(mxl5005s_attach, adap->fe[0],
+			&adap->dev->i2c_adap,
+			&ec168_mxl5003s_config) == NULL ? -ENODEV : 0;
 }
 
-#define E3C_EC168_1689                          0
-#define E3C_EC168_FFFA                          1
-#define E3C_EC168_FFFB                          2
-#define E3C_EC168_1001                          3
-#define E3C_EC168_1002                          4
-
-static struct usb_device_id ec168_id[] = {
-	[E3C_EC168_1689] =
-		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168)},
-	[E3C_EC168_FFFA] =
-		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2)},
-	[E3C_EC168_FFFB] =
-		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3)},
-	[E3C_EC168_1001] =
-		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4)},
-	[E3C_EC168_1002] =
-		{USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5)},
-	{} /* terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, ec168_id);
+static int ec168_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL};
+	deb_info("%s: onoff:%d\n", __func__, onoff);
+	if (onoff)
+		req.index = 0x0102;
+	return ec168_ctrl_msg(adap->dev, &req);
+}
 
-static struct dvb_usb_device_properties ec168_properties = {
-	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+/* DVB USB Driver stuff */
+/* bInterfaceNumber 0 is HID
+ * bInterfaceNumber 1 is DVB-T */
+static struct dvb_usb_device_properties ec168_props = {
+	.driver_name = KBUILD_MODNAME,
+	.owner = THIS_MODULE,
+	.adapter_nr = adapter_nr,
+	.bInterfaceNumber = 1,
 
-	.usb_ctrl = DEVICE_SPECIFIC,
-	.download_firmware = ec168_download_firmware,
+	.identify_state = ec168_identify_state,
 	.firmware = "dvb-usb-ec168.fw",
-	.no_reconnect = 1,
+	.download_firmware = ec168_download_firmware,
 
-	.size_of_priv = 0,
+	.i2c_algo = &ec168_i2c_algo,
+	.frontend_attach = ec168_ec100_frontend_attach,
+	.tuner_attach = ec168_mxl5003s_tuner_attach,
+	.streaming_ctrl = ec168_streaming_ctrl,
 
 	.num_adapters = 1,
 	.adapter = {
 		{
-		.num_frontends = 1,
-		.fe = {{
-			.streaming_ctrl   = ec168_streaming_ctrl,
-			.frontend_attach  = ec168_ec100_frontend_attach,
-			.tuner_attach     = ec168_mxl5003s_tuner_attach,
 			.stream = {
 				.type = USB_BULK,
 				.count = 6,
@@ -397,35 +348,39 @@ static struct dvb_usb_device_properties ec168_properties = {
 					}
 				}
 			},
-		}},
 		}
 	},
+};
 
-	.identify_state = ec168_identify_state,
-
-	.i2c_algo = &ec168_i2c_algo,
+static const struct dvb_usb_driver_info ec168_driver_info = {
+	.name = "E3C EC168 reference design",
+	.props = &ec168_props,
+};
 
-	.num_device_descs = 1,
-	.devices = {
-		{
-			.name = "E3C EC168 DVB-T USB2.0 reference design",
-			.cold_ids = {
-				&ec168_id[E3C_EC168_1689],
-				&ec168_id[E3C_EC168_FFFA],
-				&ec168_id[E3C_EC168_FFFB],
-				&ec168_id[E3C_EC168_1001],
-				&ec168_id[E3C_EC168_1002],
-				NULL},
-			.warm_ids = {NULL},
-		},
-	}
+static const struct usb_device_id ec168_id[] = {
+	{ USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168),
+		.driver_info = (kernel_ulong_t) &ec168_driver_info },
+	{ USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2),
+		.driver_info = (kernel_ulong_t) &ec168_driver_info },
+	{ USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3),
+		.driver_info = (kernel_ulong_t) &ec168_driver_info },
+	{ USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4),
+		.driver_info = (kernel_ulong_t) &ec168_driver_info },
+	{ USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5),
+		.driver_info = (kernel_ulong_t) &ec168_driver_info },
+	{}
 };
+MODULE_DEVICE_TABLE(usb, ec168_id);
 
 static struct usb_driver ec168_driver = {
-	.name       = "dvb_usb_ec168",
-	.probe      = ec168_probe,
-	.disconnect = dvb_usb_device_exit,
-	.id_table   = ec168_id,
+	.name = KBUILD_MODNAME,
+	.id_table = ec168_id,
+	.probe = dvb_usbv2_probe,
+	.disconnect = dvb_usbv2_disconnect,
+	.suspend = dvb_usbv2_suspend,
+	.resume = dvb_usbv2_resume,
+	.no_dynamic_id = 1,
+	.soft_unbind = 1,
 };
 
 module_usb_driver(ec168_driver);