diff options
author | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-06-14 16:35:56 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2012-08-13 23:26:31 -0300 |
commit | 786baecfe78f8e25547c628b48a60fc8e5636056 (patch) | |
tree | bb4101ce010f55cbbfc6d93ee13b44b496a028cc /drivers/media/dvb/dvb-usb/friio.h | |
parent | 616300bd51bee80d2d122c205866aa4c20adbaa8 (diff) |
[media] dvb-usb: move it to drivers/media/usb/dvb-usb
As media/dvb will be removed, move it to a proper place.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/dvb/dvb-usb/friio.h')
-rw-r--r-- | drivers/media/dvb/dvb-usb/friio.h | 99 |
1 files changed, 0 insertions, 99 deletions
diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h deleted file mode 100644 index 0f461ca10cb..00000000000 --- a/drivers/media/dvb/dvb-usb/friio.h +++ /dev/null @@ -1,99 +0,0 @@ -/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. - * - * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp> - * - * This module is based off the the gl861 and vp702x modules. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information - */ -#ifndef _DVB_USB_FRIIO_H_ -#define _DVB_USB_FRIIO_H_ - -/** - * Friio Components - * USB hub: AU4254 - * USB controller(+ TS dmx & streaming): GL861 - * Frontend: comtech JDVBT-90502 - * (tuner PLL: tua6034, I2C addr:(0xC0 >> 1)) - * (OFDM demodulator: TC90502, I2C addr:(0x30 >> 1)) - * LED x3 (+LNB) control: PIC 16F676 - * EEPROM: 24C08 - * - * (USB smart card reader: AU9522) - * - */ - -#define DVB_USB_LOG_PREFIX "friio" -#include "dvb-usb.h" - -extern int dvb_usb_friio_debug; -#define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args) -#define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args) -#define deb_rc(args...) dprintk(dvb_usb_friio_debug, 0x04, args) -#define deb_fe(args...) dprintk(dvb_usb_friio_debug, 0x08, args) - -/* Vendor requests */ -#define GL861_WRITE 0x40 -#define GL861_READ 0xc0 - -/* command bytes */ -#define GL861_REQ_I2C_WRITE 0x01 -#define GL861_REQ_I2C_READ 0x02 -/* For control msg with data argument */ -/* Used for accessing the PLL on the secondary I2C bus of FE via GL861 */ -#define GL861_REQ_I2C_DATA_CTRL_WRITE 0x03 - -#define GL861_ALTSETTING_COUNT 2 -#define FRIIO_BULK_ALTSETTING 0 -#define FRIIO_ISOC_ALTSETTING 1 - -/* LED & LNB control via PIC. */ -/* basically, it's serial control with clock and strobe. */ -/* write the below 4bit control data to the reg 0x00 at the I2C addr 0x00 */ -/* when controlling the LEDs, 32bit(saturation, R, G, B) is sent on the bit3*/ -#define FRIIO_CTL_LNB (1 << 0) -#define FRIIO_CTL_STROBE (1 << 1) -#define FRIIO_CTL_CLK (1 << 2) -#define FRIIO_CTL_LED (1 << 3) - -/* Front End related */ - -#define FRIIO_DEMOD_ADDR (0x30 >> 1) -#define FRIIO_PLL_ADDR (0xC0 >> 1) - -#define JDVBT90502_PLL_CLK 4000000 -#define JDVBT90502_PLL_DIVIDER 28 - -#define JDVBT90502_2ND_I2C_REG 0xFE - -/* byte index for pll i2c command data structure*/ -/* see datasheet for tua6034 */ -#define DEMOD_REDIRECT_REG 0 -#define ADDRESS_BYTE 1 -#define DIVIDER_BYTE1 2 -#define DIVIDER_BYTE2 3 -#define CONTROL_BYTE 4 -#define BANDSWITCH_BYTE 5 -#define AGC_CTRL_BYTE 5 -#define PLL_CMD_LEN 6 - -/* bit masks for PLL STATUS response */ -#define PLL_STATUS_POR_MODE 0x80 /* 1: Power on Reset (test) Mode */ -#define PLL_STATUS_LOCKED 0x40 /* 1: locked */ -#define PLL_STATUS_AGC_ACTIVE 0x08 /* 1:active */ -#define PLL_STATUS_TESTMODE 0x07 /* digital output level (5 level) */ - /* 0.15Vcc step 0x00: < 0.15Vcc, ..., 0x04: >= 0.6Vcc (<= 1Vcc) */ - - -struct jdvbt90502_config { - u8 demod_address; /* i2c addr for demodulator IC */ - u8 pll_address; /* PLL addr on the secondary i2c*/ -}; -extern struct jdvbt90502_config friio_fe_config; - -extern struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d); -#endif |