Merge branch 'origin' into devel-stable

Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c

18 files changed, 1808 insertions, 339 deletions

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 1b249897c9f..e5f91f16ffa 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -112,11 +112,13 @@ config DVB_USB_CXUSB
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
-	select DVB_LGS8GL5 if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+	select DVB_ATBM8830 if !DVB_FE_CUSTOMISE
+	select DVB_LGS8GXX if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+	select MEDIA_TUNER_MAX2165 if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
@@ -334,3 +336,11 @@ config DVB_USB_EC168
 	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Say Y here to support the E3C EC168 DVB-T USB2.0 receiver.
+
+config DVB_USB_AZ6027
+	tristate "Azurewave DVB-S/S2 USB2.0 AZ6027 support"
+	depends on DVB_USB
+	select DVB_STB0899 if !DVB_FE_CUSTOMISE
+	select DVB_STB6100 if !DVB_FE_CUSTOMISE
+	help
+	  Say Y here to support the AZ6027 device
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index 72c92cb69a2..1a192453b0e 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -85,6 +85,9 @@ obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o
 dvb-usb-ec168-objs = ec168.o
 obj-$(CONFIG_DVB_USB_EC168) += dvb-usb-ec168.o
 
+dvb-usb-az6027-objs = az6027.o
+obj-$(CONFIG_DVB_USB_AZ6027) += dvb-usb-az6027.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 8b60a601fb8..d7975383d31 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -21,6 +21,8 @@
  *
  */
 
+#include <linux/hash.h>
+
 #include "af9015.h"
 #include "af9013.h"
 #include "mt2060.h"
@@ -553,26 +555,45 @@ exit:
 	return ret;
 }
 
-/* dump eeprom */
-static int af9015_eeprom_dump(struct dvb_usb_device *d)
+/* hash (and dump) eeprom */
+static int af9015_eeprom_hash(struct usb_device *udev)
 {
-	u8 reg, val;
+	static const unsigned int eeprom_size = 256;
+	unsigned int reg;
+	int ret;
+	u8 val, *eeprom;
+	struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
 
-	for (reg = 0; ; reg++) {
-		if (reg % 16 == 0) {
-			if (reg)
-				deb_info(KERN_CONT "\n");
-			deb_info(KERN_DEBUG "%02x:", reg);
-		}
-		if (af9015_read_reg_i2c(d, AF9015_I2C_EEPROM, reg, &val) == 0)
-			deb_info(KERN_CONT " %02x", val);
-		else
-			deb_info(KERN_CONT " --");
-		if (reg == 0xff)
-			break;
+	eeprom = kmalloc(eeprom_size, GFP_KERNEL);
+	if (eeprom == NULL)
+		return -ENOMEM;
+
+	for (reg = 0; reg < eeprom_size; reg++) {
+		req.addr = reg;
+		ret = af9015_rw_udev(udev, &req);
+		if (ret)
+			goto free;
+		eeprom[reg] = val;
 	}
-	deb_info(KERN_CONT "\n");
-	return 0;
+
+	if (dvb_usb_af9015_debug & 0x01)
+		print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom,
+				eeprom_size);
+
+	BUG_ON(eeprom_size % 4);
+
+	af9015_config.eeprom_sum = 0;
+	for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) {
+		af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32;
+		af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]);
+	}
+
+	deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum);
+
+	ret = 0;
+free:
+	kfree(eeprom);
+	return ret;
 }
 
 static int af9015_download_ir_table(struct dvb_usb_device *d)
@@ -711,12 +732,132 @@ error:
 	return ret;
 }
 
+struct af9015_setup {
+	unsigned int id;
+	struct dvb_usb_rc_key *rc_key_map;
+	unsigned int rc_key_map_size;
+	u8 *ir_table;
+	unsigned int ir_table_size;
+};
+
+static const struct af9015_setup *af9015_setup_match(unsigned int id,
+		const struct af9015_setup *table)
+{
+	for (; table->rc_key_map; table++)
+		if (table->id == id)
+			return table;
+	return NULL;
+}
+
+static const struct af9015_setup af9015_setup_modparam[] = {
+	{ AF9015_REMOTE_A_LINK_DTU_M,
+		af9015_rc_keys_a_link, ARRAY_SIZE(af9015_rc_keys_a_link),
+		af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
+	{ AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+		af9015_rc_keys_msi, ARRAY_SIZE(af9015_rc_keys_msi),
+		af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
+	{ AF9015_REMOTE_MYGICTV_U718,
+		af9015_rc_keys_mygictv, ARRAY_SIZE(af9015_rc_keys_mygictv),
+		af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
+	{ AF9015_REMOTE_DIGITTRADE_DVB_T,
+		af9015_rc_keys_digittrade, ARRAY_SIZE(af9015_rc_keys_digittrade),
+		af9015_ir_table_digittrade, ARRAY_SIZE(af9015_ir_table_digittrade) },
+	{ AF9015_REMOTE_AVERMEDIA_KS,
+		af9015_rc_keys_avermedia, ARRAY_SIZE(af9015_rc_keys_avermedia),
+		af9015_ir_table_avermedia_ks, ARRAY_SIZE(af9015_ir_table_avermedia_ks) },
+	{ }
+};
+
+/* don't add new entries here anymore, use hashes instead */
+static const struct af9015_setup af9015_setup_usbids[] = {
+	{ USB_VID_LEADTEK,
+		af9015_rc_keys_leadtek, ARRAY_SIZE(af9015_rc_keys_leadtek),
+		af9015_ir_table_leadtek, ARRAY_SIZE(af9015_ir_table_leadtek) },
+	{ USB_VID_VISIONPLUS,
+		af9015_rc_keys_twinhan, ARRAY_SIZE(af9015_rc_keys_twinhan),
+		af9015_ir_table_twinhan, ARRAY_SIZE(af9015_ir_table_twinhan) },
+	{ USB_VID_KWORLD_2, /* TODO: use correct rc keys */
+		af9015_rc_keys_twinhan, ARRAY_SIZE(af9015_rc_keys_twinhan),
+		af9015_ir_table_kworld, ARRAY_SIZE(af9015_ir_table_kworld) },
+	{ USB_VID_AVERMEDIA,
+		af9015_rc_keys_avermedia, ARRAY_SIZE(af9015_rc_keys_avermedia),
+		af9015_ir_table_avermedia, ARRAY_SIZE(af9015_ir_table_avermedia) },
+	{ USB_VID_MSI_2,
+		af9015_rc_keys_msi_digivox_iii, ARRAY_SIZE(af9015_rc_keys_msi_digivox_iii),
+		af9015_ir_table_msi_digivox_iii, ARRAY_SIZE(af9015_ir_table_msi_digivox_iii) },
+	{ }
+};
+
+static const struct af9015_setup af9015_setup_hashes[] = {
+	{ 0xb8feb708,
+		af9015_rc_keys_msi, ARRAY_SIZE(af9015_rc_keys_msi),
+		af9015_ir_table_msi, ARRAY_SIZE(af9015_ir_table_msi) },
+	{ 0xa3703d00,
+		af9015_rc_keys_a_link, ARRAY_SIZE(af9015_rc_keys_a_link),
+		af9015_ir_table_a_link, ARRAY_SIZE(af9015_ir_table_a_link) },
+	{ 0x9b7dc64e,
+		af9015_rc_keys_mygictv, ARRAY_SIZE(af9015_rc_keys_mygictv),
+		af9015_ir_table_mygictv, ARRAY_SIZE(af9015_ir_table_mygictv) },
+	{ }
+};
+
+static void af9015_set_remote_config(struct usb_device *udev,
+		struct dvb_usb_device_properties *props)
+{
+	const struct af9015_setup *table = NULL;
+
+	if (dvb_usb_af9015_remote) {
+		/* load remote defined as module param */
+		table = af9015_setup_match(dvb_usb_af9015_remote,
+				af9015_setup_modparam);
+	} else {
+		u16 vendor = le16_to_cpu(udev->descriptor.idVendor);
+
+		table = af9015_setup_match(af9015_config.eeprom_sum,
+				af9015_setup_hashes);
+
+		if (!table && vendor == USB_VID_AFATECH) {
+			/* Check USB manufacturer and product strings and try
+			   to determine correct remote in case of chip vendor
+			   reference IDs are used.
+			   DO NOT ADD ANYTHING NEW HERE. Use hashes instead.
+			 */
+			char manufacturer[10];
+			memset(manufacturer, 0, sizeof(manufacturer));
+			usb_string(udev, udev->descriptor.iManufacturer,
+				manufacturer, sizeof(manufacturer));
+			if (!strcmp("MSI", manufacturer)) {
+				/* iManufacturer 1 MSI
+				   iProduct      2 MSI K-VOX */
+				table = af9015_setup_match(
+					AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+					af9015_setup_modparam);
+			} else if (udev->descriptor.idProduct ==
+				cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
+				table = &(const struct af9015_setup){ 0,
+					af9015_rc_keys_trekstor,
+					ARRAY_SIZE(af9015_rc_keys_trekstor),
+					af9015_ir_table_trekstor,
+					ARRAY_SIZE(af9015_ir_table_trekstor)
+				};
+			}
+		} else if (!table)
+			table = af9015_setup_match(vendor, af9015_setup_usbids);
+	}
+
+	if (table) {
+		props->rc_key_map = table->rc_key_map;
+		props->rc_key_map_size = table->rc_key_map_size;
+		af9015_config.ir_table = table->ir_table;
+		af9015_config.ir_table_size = table->ir_table_size;
+	}
+}
+
 static int af9015_read_config(struct usb_device *udev)
 {
 	int ret;
 	u8 val, i, offset = 0;
 	struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
-	char manufacturer[10];
 
 	/* IR remote controller */
 	req.addr = AF9015_EEPROM_IR_MODE;
@@ -728,158 +869,18 @@ static int af9015_read_config(struct usb_device *udev)
 	}
 	if (ret)
 		goto error;
+
+	ret = af9015_eeprom_hash(udev);
+	if (ret)
+		goto error;
+
 	deb_info("%s: IR mode:%d\n", __func__, val);
 	for (i = 0; i < af9015_properties_count; i++) {
 		if (val == AF9015_IR_MODE_DISABLED) {
 			af9015_properties[i].rc_key_map = NULL;
 			af9015_properties[i].rc_key_map_size  = 0;
-		} else if (dvb_usb_af9015_remote) {
-			/* load remote defined as module param */
-			switch (dvb_usb_af9015_remote) {
-			case AF9015_REMOTE_A_LINK_DTU_M:
-				af9015_properties[i].rc_key_map =
-				  af9015_rc_keys_a_link;
-				af9015_properties[i].rc_key_map_size =
-				  ARRAY_SIZE(af9015_rc_keys_a_link);
-				af9015_config.ir_table = af9015_ir_table_a_link;
-				af9015_config.ir_table_size =
-				  ARRAY_SIZE(af9015_ir_table_a_link);
-				break;
-			case AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3:
-				af9015_properties[i].rc_key_map =
-				  af9015_rc_keys_msi;
-				af9015_properties[i].rc_key_map_size =
-				  ARRAY_SIZE(af9015_rc_keys_msi);
-				af9015_config.ir_table = af9015_ir_table_msi;
-				af9015_config.ir_table_size =
-				  ARRAY_SIZE(af9015_ir_table_msi);
-				break;
-			case AF9015_REMOTE_MYGICTV_U718:
-				af9015_properties[i].rc_key_map =
-				  af9015_rc_keys_mygictv;
-				af9015_properties[i].rc_key_map_size =
-				  ARRAY_SIZE(af9015_rc_keys_mygictv);
-				af9015_config.ir_table =
-				  af9015_ir_table_mygictv;
-				af9015_config.ir_table_size =
-				  ARRAY_SIZE(af9015_ir_table_mygictv);
-				break;
-			case AF9015_REMOTE_DIGITTRADE_DVB_T:
-				af9015_properties[i].rc_key_map =
-				  af9015_rc_keys_digittrade;
-				af9015_properties[i].rc_key_map_size =
-				  ARRAY_SIZE(af9015_rc_keys_digittrade);
-				af9015_config.ir_table =
-				  af9015_ir_table_digittrade;
-				af9015_config.ir_table_size =
-				  ARRAY_SIZE(af9015_ir_table_digittrade);
-				break;
-			case AF9015_REMOTE_AVERMEDIA_KS:
-				af9015_properties[i].rc_key_map =
-				  af9015_rc_keys_avermedia;
-				af9015_properties[i].rc_key_map_size =
-				  ARRAY_SIZE(af9015_rc_keys_avermedia);
-				af9015_config.ir_table =
-				  af9015_ir_table_avermedia_ks;
-				af9015_config.ir_table_size =
-				  ARRAY_SIZE(af9015_ir_table_avermedia_ks);
-				break;
-			}
-		} else {
-			switch (le16_to_cpu(udev->descriptor.idVendor)) {
-			case USB_VID_LEADTEK:
-				af9015_properties[i].rc_key_map =
-				  af9015_rc_keys_leadtek;
-				af9015_properties[i].rc_key_map_size =
-				  ARRAY_SIZE(af9015_rc_keys_leadtek);
-				af9015_config.ir_table =
-				  af9015_ir_table_leadtek;
-				af9015_config.ir_table_size =
-				  ARRAY_SIZE(af9015_ir_table_leadtek);
-				break;
-			case USB_VID_VISIONPLUS:
-				af9015_properties[i].rc_key_map =
-				  af9015_rc_keys_twinhan;
-				af9015_properties[i].rc_key_map_size =
-				  ARRAY_SIZE(af9015_rc_keys_twinhan);
-				af9015_config.ir_table =
-				  af9015_ir_table_twinhan;
-				af9015_config.ir_table_size =
-				  ARRAY_SIZE(af9015_ir_table_twinhan);
-				break;
-			case USB_VID_KWORLD_2:
-				/* TODO: use correct rc keys */
-				af9015_properties[i].rc_key_map =
-				  af9015_rc_keys_twinhan;
-				af9015_properties[i].rc_key_map_size =
-				  ARRAY_SIZE(af9015_rc_keys_twinhan);
-				af9015_config.ir_table = af9015_ir_table_kworld;
-				af9015_config.ir_table_size =
-				  ARRAY_SIZE(af9015_ir_table_kworld);
-				break;
-			/* Check USB manufacturer and product strings and try
-			   to determine correct remote in case of chip vendor
-			   reference IDs are used. */
-			case USB_VID_AFATECH:
-				memset(manufacturer, 0, sizeof(manufacturer));
-				usb_string(udev, udev->descriptor.iManufacturer,
-					manufacturer, sizeof(manufacturer));
-				if (!strcmp("Geniatech", manufacturer)) {
-					/* iManufacturer 1 Geniatech
-					   iProduct      2 AF9015 */
-					af9015_properties[i].rc_key_map =
-					  af9015_rc_keys_mygictv;
-					af9015_properties[i].rc_key_map_size =
-					  ARRAY_SIZE(af9015_rc_keys_mygictv);
-					af9015_config.ir_table =
-					  af9015_ir_table_mygictv;
-					af9015_config.ir_table_size =
-					  ARRAY_SIZE(af9015_ir_table_mygictv);
-				} else if (!strcmp("MSI", manufacturer)) {
-					/* iManufacturer 1 MSI
-					   iProduct      2 MSI K-VOX */
-					af9015_properties[i].rc_key_map =
-					  af9015_rc_keys_msi;
-					af9015_properties[i].rc_key_map_size =
-					  ARRAY_SIZE(af9015_rc_keys_msi);
-					af9015_config.ir_table =
-					  af9015_ir_table_msi;
-					af9015_config.ir_table_size =
-					  ARRAY_SIZE(af9015_ir_table_msi);
-				} else if (udev->descriptor.idProduct ==
-					cpu_to_le16(USB_PID_TREKSTOR_DVBT)) {
-					af9015_properties[i].rc_key_map =
-					  af9015_rc_keys_trekstor;
-					af9015_properties[i].rc_key_map_size =
-					  ARRAY_SIZE(af9015_rc_keys_trekstor);
-					af9015_config.ir_table =
-					  af9015_ir_table_trekstor;
-					af9015_config.ir_table_size =
-					  ARRAY_SIZE(af9015_ir_table_trekstor);
-				}
-				break;
-			case USB_VID_AVERMEDIA:
-				af9015_properties[i].rc_key_map =
-				  af9015_rc_keys_avermedia;
-				af9015_properties[i].rc_key_map_size =
-				  ARRAY_SIZE(af9015_rc_keys_avermedia);
-				af9015_config.ir_table =
-				  af9015_ir_table_avermedia;
-				af9015_config.ir_table_size =
-				  ARRAY_SIZE(af9015_ir_table_avermedia);
-				break;
-			case USB_VID_MSI_2:
-				af9015_properties[i].rc_key_map =
-				  af9015_rc_keys_msi_digivox_iii;
-				af9015_properties[i].rc_key_map_size =
-				  ARRAY_SIZE(af9015_rc_keys_msi_digivox_iii);
-				af9015_config.ir_table =
-				  af9015_ir_table_msi_digivox_iii;
-				af9015_config.ir_table_size =
-				  ARRAY_SIZE(af9015_ir_table_msi_digivox_iii);
-				break;
-			}
-		}
+		} else
+			af9015_set_remote_config(udev, &af9015_properties[i]);
 	}
 
 	/* TS mode - one or two receivers */
@@ -1001,6 +1002,9 @@ static int af9015_read_config(struct usb_device *udev)
 			af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
 			af9015_af9013_config[i].rf_spec_inv = 1;
 			break;
+		case AF9013_TUNER_TDA18218:
+			warn("tuner NXP TDA18218 not supported yet");
+			return -ENODEV;
 		default:
 			warn("tuner id:%d not supported, please report!", val);
 			return -ENODEV;
@@ -1125,11 +1129,6 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
 
 		deb_info("%s: init I2C\n", __func__);
 		ret = af9015_i2c_init(adap->dev);
-
-		/* dump eeprom (debug) */
-		ret = af9015_eeprom_dump(adap->dev);
-		if (ret)
-			return ret;
 	} else {
 		/* select I2C adapter */
 		i2c_adap = &state->i2c_adap;
@@ -1295,6 +1294,8 @@ static struct usb_device_id af9015_usb_table[] = {
 /* 25 */{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_KWORLD_399U_2)},
 	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_KWORLD_PC160_T)},
 	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_SVEON_STV20)},
+	{USB_DEVICE(USB_VID_KWORLD_2,  USB_PID_TINYTWIN_2)},
+	{USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV2000DS)},
 	{0},
 };
 MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1381,7 +1382,8 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 			},
 			{
 				.name = "DigitalNow TinyTwin DVB-T Receiver",
-				.cold_ids = {&af9015_usb_table[5], NULL},
+				.cold_ids = {&af9015_usb_table[5],
+					     &af9015_usb_table[28], NULL},
 				.warm_ids = {NULL},
 			},
 			{
@@ -1566,7 +1568,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 
 		.i2c_algo = &af9015_i2c_algo,
 
-		.num_device_descs = 6, /* max 9 */
+		.num_device_descs = 7, /* max 9 */
 		.devices = {
 			{
 				.name = "AverMedia AVerTV Volar GPS 805 (A805)",
@@ -1600,6 +1602,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 				.cold_ids = {&af9015_usb_table[27], NULL},
 				.warm_ids = {NULL},
 			},
+			{
+				.name = "Leadtek WinFast DTV2000DS",
+				.cold_ids = {&af9015_usb_table[29], NULL},
+				.warm_ids = {NULL},
+			},
 		}
 	},
 };
diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h
index 931c8515830..ef36b183149 100644
--- a/drivers/media/dvb/dvb-usb/af9015.h
+++ b/drivers/media/dvb/dvb-usb/af9015.h
@@ -107,6 +107,7 @@ struct af9015_config {
 	u16 mt2060_if1[2];
 	u16 firmware_size;
 	u16 firmware_checksum;
+	u32 eeprom_sum;
 	u8  *ir_table;
 	u16 ir_table_size;
 };
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
new file mode 100644
index 00000000000..d7290b2c091
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -0,0 +1,1151 @@
+/* DVB USB compliant Linux driver for the AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)
+ * receiver.
+ *
+ * Copyright (C) 2009 Adams.Xu <adams.xu@azwave.com.cn>
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the Free
+ *	Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "az6027.h"
+
+#include "stb0899_drv.h"
+#include "stb0899_reg.h"
+#include "stb0899_cfg.h"
+
+#include "stb6100.h"
+#include "stb6100_cfg.h"
+#include "dvb_ca_en50221.h"
+
+int dvb_usb_az6027_debug;
+module_param_named(debug, dvb_usb_az6027_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct az6027_device_state {
+	struct dvb_ca_en50221 ca;
+	struct mutex ca_mutex;
+	u8 power_state;
+};
+
+static const struct stb0899_s1_reg az6027_stb0899_s1_init_1[] = {
+
+	/* 0x0000000b, SYSREG */
+	{ STB0899_DEV_ID		, 0x30 },
+	{ STB0899_DISCNTRL1		, 0x32 },
+	{ STB0899_DISCNTRL2     	, 0x80 },
+	{ STB0899_DISRX_ST0     	, 0x04 },
+	{ STB0899_DISRX_ST1     	, 0x00 },
+	{ STB0899_DISPARITY     	, 0x00 },
+	{ STB0899_DISFIFO       	, 0x00 },
+	{ STB0899_DISSTATUS		, 0x20 },
+	{ STB0899_DISF22        	, 0x99 },
+	{ STB0899_DISF22RX      	, 0xa8 },
+	/* SYSREG ? */
+	{ STB0899_ACRPRESC      	, 0x11 },
+	{ STB0899_ACRDIV1       	, 0x0a },
+	{ STB0899_ACRDIV2       	, 0x05 },
+	{ STB0899_DACR1         	, 0x00 },
+	{ STB0899_DACR2         	, 0x00 },
+	{ STB0899_OUTCFG        	, 0x00 },
+	{ STB0899_MODECFG       	, 0x00 },
+	{ STB0899_IRQSTATUS_3		, 0xfe },
+	{ STB0899_IRQSTATUS_2		, 0x03 },
+	{ STB0899_IRQSTATUS_1		, 0x7c },
+	{ STB0899_IRQSTATUS_0		, 0xf4 },
+	{ STB0899_IRQMSK_3      	, 0xf3 },
+	{ STB0899_IRQMSK_2      	, 0xfc },
+	{ STB0899_IRQMSK_1      	, 0xff },
+	{ STB0899_IRQMSK_0		, 0xff },
+	{ STB0899_IRQCFG		, 0x00 },
+	{ STB0899_I2CCFG        	, 0x88 },
+	{ STB0899_I2CRPT        	, 0x58 },
+	{ STB0899_IOPVALUE5		, 0x00 },
+	{ STB0899_IOPVALUE4		, 0x33 },
+	{ STB0899_IOPVALUE3		, 0x6d },
+	{ STB0899_IOPVALUE2		, 0x90 },
+	{ STB0899_IOPVALUE1		, 0x60 },
+	{ STB0899_IOPVALUE0		, 0x00 },
+	{ STB0899_GPIO00CFG     	, 0x82 },
+	{ STB0899_GPIO01CFG     	, 0x82 },
+	{ STB0899_GPIO02CFG     	, 0x82 },
+	{ STB0899_GPIO03CFG     	, 0x82 },
+	{ STB0899_GPIO04CFG     	, 0x82 },
+	{ STB0899_GPIO05CFG     	, 0x82 },
+	{ STB0899_GPIO06CFG     	, 0x82 },
+	{ STB0899_GPIO07CFG     	, 0x82 },
+	{ STB0899_GPIO08CFG     	, 0x82 },
+	{ STB0899_GPIO09CFG     	, 0x82 },
+	{ STB0899_GPIO10CFG     	, 0x82 },
+	{ STB0899_GPIO11CFG     	, 0x82 },
+	{ STB0899_GPIO12CFG     	, 0x82 },
+	{ STB0899_GPIO13CFG     	, 0x82 },
+	{ STB0899_GPIO14CFG     	, 0x82 },
+	{ STB0899_GPIO15CFG     	, 0x82 },
+	{ STB0899_GPIO16CFG     	, 0x82 },
+	{ STB0899_GPIO17CFG     	, 0x82 },
+	{ STB0899_GPIO18CFG     	, 0x82 },
+	{ STB0899_GPIO19CFG     	, 0x82 },
+	{ STB0899_GPIO20CFG     	, 0x82 },
+	{ STB0899_SDATCFG       	, 0xb8 },
+	{ STB0899_SCLTCFG       	, 0xba },
+	{ STB0899_AGCRFCFG      	, 0x1c }, /* 0x11 */
+	{ STB0899_GPIO22        	, 0x82 }, /* AGCBB2CFG */
+	{ STB0899_GPIO21        	, 0x91 }, /* AGCBB1CFG */
+	{ STB0899_DIRCLKCFG     	, 0x82 },
+	{ STB0899_CLKOUT27CFG   	, 0x7e },
+	{ STB0899_STDBYCFG      	, 0x82 },
+	{ STB0899_CS0CFG        	, 0x82 },
+	{ STB0899_CS1CFG        	, 0x82 },
+	{ STB0899_DISEQCOCFG    	, 0x20 },
+	{ STB0899_GPIO32CFG		, 0x82 },
+	{ STB0899_GPIO33CFG		, 0x82 },
+	{ STB0899_GPIO34CFG		, 0x82 },
+	{ STB0899_GPIO35CFG		, 0x82 },
+	{ STB0899_GPIO36CFG		, 0x82 },
+	{ STB0899_GPIO37CFG		, 0x82 },
+	{ STB0899_GPIO38CFG		, 0x82 },
+	{ STB0899_GPIO39CFG		, 0x82 },
+	{ STB0899_NCOARSE       	, 0x17 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */
+	{ STB0899_SYNTCTRL      	, 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */
+	{ STB0899_FILTCTRL      	, 0x00 },
+	{ STB0899_SYSCTRL       	, 0x01 },
+	{ STB0899_STOPCLK1      	, 0x20 },
+	{ STB0899_STOPCLK2      	, 0x00 },
+	{ STB0899_INTBUFSTATUS		, 0x00 },
+	{ STB0899_INTBUFCTRL    	, 0x0a },
+	{ 0xffff			, 0xff },
+};
+
+static const struct stb0899_s1_reg az6027_stb0899_s1_init_3[] = {
+	{ STB0899_DEMOD         	, 0x00 },
+	{ STB0899_RCOMPC        	, 0xc9 },
+	{ STB0899_AGC1CN        	, 0x01 },
+	{ STB0899_AGC1REF       	, 0x10 },
+	{ STB0899_RTC	        	, 0x23 },
+	{ STB0899_TMGCFG        	, 0x4e },
+	{ STB0899_AGC2REF       	, 0x34 },
+	{ STB0899_TLSR          	, 0x84 },
+	{ STB0899_CFD           	, 0xf7 },
+	{ STB0899_ACLC	        	, 0x87 },
+	{ STB0899_BCLC          	, 0x94 },
+	{ STB0899_EQON          	, 0x41 },
+	{ STB0899_LDT           	, 0xf1 },
+	{ STB0899_LDT2          	, 0xe3 },
+	{ STB0899_EQUALREF      	, 0xb4 },
+	{ STB0899_TMGRAMP       	, 0x10 },
+	{ STB0899_TMGTHD        	, 0x30 },
+	{ STB0899_IDCCOMP		, 0xfd },
+	{ STB0899_QDCCOMP		, 0xff },
+	{ STB0899_POWERI		, 0x0c },
+	{ STB0899_POWERQ		, 0x0f },
+	{ STB0899_RCOMP			, 0x6c },
+	{ STB0899_AGCIQIN		, 0x80 },
+	{ STB0899_AGC2I1		, 0x06 },
+	{ STB0899_AGC2I2		, 0x00 },
+	{ STB0899_TLIR			, 0x30 },
+	{ STB0899_RTF			, 0x7f },
+	{ STB0899_DSTATUS		, 0x00 },
+	{ STB0899_LDI			, 0xbc },
+	{ STB0899_CFRM			, 0xea },
+	{ STB0899_CFRL			, 0x31 },
+	{ STB0899_NIRM			, 0x2b },
+	{ STB0899_NIRL			, 0x80 },
+	{ STB0899_ISYMB			, 0x1d },
+	{ STB0899_QSYMB			, 0xa6 },
+	{ STB0899_SFRH          	, 0x2f },
+	{ STB0899_SFRM          	, 0x68 },
+	{ STB0899_SFRL          	, 0x40 },
+	{ STB0899_SFRUPH        	, 0x2f },
+	{ STB0899_SFRUPM        	, 0x68 },
+	{ STB0899_SFRUPL        	, 0x40 },
+	{ STB0899_EQUAI1		, 0x02 },
+	{ STB0899_EQUAQ1		, 0xff },
+	{ STB0899_EQUAI2		, 0x04 },
+	{ STB0899_EQUAQ2		, 0x05 },
+	{ STB0899_EQUAI3		, 0x02 },
+	{ STB0899_EQUAQ3		, 0xfd },
+	{ STB0899_EQUAI4		, 0x03 },
+	{ STB0899_EQUAQ4		, 0x07 },
+	{ STB0899_EQUAI5		, 0x08 },
+	{ STB0899_EQUAQ5		, 0xf5 },
+	{ STB0899_DSTATUS2		, 0x00 },
+	{ STB0899_VSTATUS       	, 0x00 },
+	{ STB0899_VERROR		, 0x86 },
+	{ STB0899_IQSWAP		, 0x2a },
+	{ STB0899_ECNT1M		, 0x00 },
+	{ STB0899_ECNT1L		, 0x00 },
+	{ STB0899_ECNT2M		, 0x00 },
+	{ STB0899_ECNT2L		, 0x00 },
+	{ STB0899_ECNT3M		, 0x0a },
+	{ STB0899_ECNT3L		, 0xad },
+	{ STB0899_FECAUTO1      	, 0x06 },
+	{ STB0899_FECM	        	, 0x01 },
+	{ STB0899_VTH12         	, 0xb0 },
+	{ STB0899_VTH23         	, 0x7a },
+	{ STB0899_VTH34	        	, 0x58 },
+	{ STB0899_VTH56         	, 0x38 },
+	{ STB0899_VTH67         	, 0x34 },
+	{ STB0899_VTH78         	, 0x24 },
+	{ STB0899_PRVIT         	, 0xff },
+	{ STB0899_VITSYNC       	, 0x19 },
+	{ STB0899_RSULC         	, 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */
+	{ STB0899_TSULC         	, 0x42 },
+	{ STB0899_RSLLC         	, 0x41 },
+	{ STB0899_TSLPL	        	, 0x12 },
+	{ STB0899_TSCFGH        	, 0x0c },
+	{ STB0899_TSCFGM        	, 0x00 },
+	{ STB0899_TSCFGL        	, 0x00 },
+	{ STB0899_TSOUT			, 0x69 }, /* 0x0d for CAM */
+	{ STB0899_RSSYNCDEL     	, 0x00 },
+	{ STB0899_TSINHDELH     	, 0x02 },
+	{ STB0899_TSINHDELM		, 0x00 },
+	{ STB0899_TSINHDELL		, 0x00 },
+	{ STB0899_TSLLSTKM		, 0x1b },
+	{ STB0899_TSLLSTKL		, 0xb3 },
+	{ STB0899_TSULSTKM		, 0x00 },
+	{ STB0899_TSULSTKL		, 0x00 },
+	{ STB0899_PCKLENUL		, 0xbc },
+	{ STB0899_PCKLENLL		, 0xcc },
+	{ STB0899_RSPCKLEN		, 0xbd },
+	{ STB0899_TSSTATUS		, 0x90 },
+	{ STB0899_ERRCTRL1      	, 0xb6 },
+	{ STB0899_ERRCTRL2      	, 0x95 },
+	{ STB0899_ERRCTRL3      	, 0x8d },
+	{ STB0899_DMONMSK1		, 0x27 },
+	{ STB0899_DMONMSK0		, 0x03 },
+	{ STB0899_DEMAPVIT      	, 0x5c },
+	{ STB0899_PLPARM		, 0x19 },
+	{ STB0899_PDELCTRL      	, 0x48 },
+	{ STB0899_PDELCTRL2     	, 0x00 },
+	{ STB0899_BBHCTRL1      	, 0x00 },
+	{ STB0899_BBHCTRL2      	, 0x00 },
+	{ STB0899_HYSTTHRESH    	, 0x77 },
+	{ STB0899_MATCSTM		, 0x00 },
+	{ STB0899_MATCSTL		, 0x00 },
+	{ STB0899_UPLCSTM		, 0x00 },
+	{ STB0899_UPLCSTL		, 0x00 },
+	{ STB0899_DFLCSTM		, 0x00 },
+	{ STB0899_DFLCSTL		, 0x00 },
+	{ STB0899_SYNCCST		, 0x00 },
+	{ STB0899_SYNCDCSTM		, 0x00 },
+	{ STB0899_SYNCDCSTL		, 0x00 },
+	{ STB0899_ISI_ENTRY		, 0x00 },
+	{ STB0899_ISI_BIT_EN		, 0x00 },
+	{ STB0899_MATSTRM		, 0xf0 },
+	{ STB0899_MATSTRL		, 0x02 },
+	{ STB0899_UPLSTRM		, 0x45 },
+	{ STB0899_UPLSTRL		, 0x60 },
+	{ STB0899_DFLSTRM		, 0xe3 },
+	{ STB0899_DFLSTRL		, 0x00 },
+	{ STB0899_SYNCSTR		, 0x47 },
+	{ STB0899_SYNCDSTRM		, 0x05 },
+	{ STB0899_SYNCDSTRL		, 0x18 },
+	{ STB0899_CFGPDELSTATUS1	, 0x19 },
+	{ STB0899_CFGPDELSTATUS2	, 0x2b },
+	{ STB0899_BBFERRORM		, 0x00 },
+	{ STB0899_BBFERRORL		, 0x01 },
+	{ STB0899_UPKTERRORM		, 0x00 },
+	{ STB0899_UPKTERRORL		, 0x00 },
+	{ 0xffff			, 0xff },
+};
+
+
+
+struct stb0899_config az6027_stb0899_config = {
+	.init_dev		= az6027_stb0899_s1_init_1,
+	.init_s2_demod		= stb0899_s2_init_2,
+	.init_s1_demod		= az6027_stb0899_s1_init_3,
+	.init_s2_fec		= stb0899_s2_init_4,
+	.init_tst		= stb0899_s1_init_5,
+
+	.demod_address 		= 0xd0, /* 0x68, 0xd0 >> 1 */
+
+	.xtal_freq		= 27000000,
+	.inversion		= IQ_SWAP_ON, /* 1 */
+
+	.lo_clk			= 76500000,
+	.hi_clk			= 99000000,
+
+	.esno_ave		= STB0899_DVBS2_ESNO_AVE,
+	.esno_quant		= STB0899_DVBS2_ESNO_QUANT,
+	.avframes_coarse	= STB0899_DVBS2_AVFRAMES_COARSE,
+	.avframes_fine		= STB0899_DVBS2_AVFRAMES_FINE,
+	.miss_threshold		= STB0899_DVBS2_MISS_THRESHOLD,
+	.uwp_threshold_acq	= STB0899_DVBS2_UWP_THRESHOLD_ACQ,
+	.uwp_threshold_track	= STB0899_DVBS2_UWP_THRESHOLD_TRACK,
+	.uwp_threshold_sof	= STB0899_DVBS2_UWP_THRESHOLD_SOF,
+	.sof_search_timeout	= STB0899_DVBS2_SOF_SEARCH_TIMEOUT,
+
+	.btr_nco_bits		= STB0899_DVBS2_BTR_NCO_BITS,
+	.btr_gain_shift_offset	= STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET,
+	.crl_nco_bits		= STB0899_DVBS2_CRL_NCO_BITS,
+	.ldpc_max_iter		= STB0899_DVBS2_LDPC_MAX_ITER,
+
+	.tuner_get_frequency	= stb6100_get_frequency,
+	.tuner_set_frequency	= stb6100_set_frequency,
+	.tuner_set_bandwidth	= stb6100_set_bandwidth,
+	.tuner_get_bandwidth	= stb6100_get_bandwidth,
+	.tuner_set_rfsiggain	= NULL,
+};
+
+struct stb6100_config az6027_stb6100_config = {
+	.tuner_address	= 0xc0,
+	.refclock	= 27000000,
+};
+
+
+/* check for mutex FIXME */
+int az6027_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
+{
+	int ret = -1;
+	if (mutex_lock_interruptible(&d->usb_mutex))
+		return -EAGAIN;
+
+	ret = usb_control_msg(d->udev,
+			      usb_rcvctrlpipe(d->udev, 0),
+			      req,
+			      USB_TYPE_VENDOR | USB_DIR_IN,
+			      value,
+			      index,
+			      b,
+			      blen,
+			      2000);
+
+	if (ret < 0) {
+		warn("usb in operation failed. (%d)", ret);
+		ret = -EIO;
+	} else
+		ret = 0;
+
+	deb_xfer("in: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index);
+	debug_dump(b, blen, deb_xfer);
+
+	mutex_unlock(&d->usb_mutex);
+	return ret;
+}
+
+static int az6027_usb_out_op(struct dvb_usb_device *d,
+			     u8 req,
+			     u16 value,
+			     u16 index,
+			     u8 *b,
+			     int blen)
+{
+	int ret;
+
+	deb_xfer("out: req. %02x, val: %04x, ind: %04x, buffer: ", req, value, index);
+	debug_dump(b, blen, deb_xfer);
+
+	if (mutex_lock_interruptible(&d->usb_mutex))
+		return -EAGAIN;
+
+	ret = usb_control_msg(d->udev,
+			      usb_sndctrlpipe(d->udev, 0),
+			      req,
+			      USB_TYPE_VENDOR | USB_DIR_OUT,
+			      value,
+			      index,
+			      b,
+			      blen,
+			      2000);
+
+	if (ret != blen) {
+		warn("usb out operation failed. (%d)", ret);
+		mutex_unlock(&d->usb_mutex);
+		return -EIO;
+	} else{
+		mutex_unlock(&d->usb_mutex);
+		return 0;
+	}
+}
+
+static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	int ret;
+	u8 req;
+	u16 value;
+	u16 index;
+	int blen;
+
+	deb_info("%s %d", __func__, onoff);
+
+	req = 0xBC;
+	value = onoff;
+	index = 0;
+	blen = 0;
+
+	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+	if (ret != 0)
+		warn("usb out operation failed. (%d)", ret);
+
+	return ret;
+}
+
+/* keys for the enclosed remote control */
+static struct dvb_usb_rc_key az6027_rc_keys[] = {
+	{ 0x01, KEY_1 },
+	{ 0x02, KEY_2 },
+};
+
+/* remote control stuff (does not work with my box) */
+static int az6027_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+	return 0;
+}
+
+/*
+int az6027_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 v = onoff;
+	return az6027_usb_out_op(d,0xBC,v,3,NULL,1);
+}
+*/
+
+static int az6027_ci_read_attribute_mem(struct dvb_ca_en50221 *ca,
+					int slot,
+					int address)
+{
+	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+	int ret;
+	u8 req;
+	u16 value;
+	u16 index;
+	int blen;
+	u8 b[12];
+
+	if (slot != 0)
+		return -EINVAL;
+
+	mutex_lock(&state->ca_mutex);
+
+	req = 0xC1;
+	value = address;
+	index = 0;
+	blen = 1;
+
+	ret = az6027_usb_in_op(d, req, value, index, b, blen);
+	if (ret < 0) {
+		warn("usb in operation failed. (%d)", ret);
+		ret = -EINVAL;
+	} else {
+		ret = b[0];
+	}
+
+	mutex_unlock(&state->ca_mutex);
+	return ret;
+}
+
+static int az6027_ci_write_attribute_mem(struct dvb_ca_en50221 *ca,
+					 int slot,
+					 int address,
+					 u8 value)
+{
+	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+	int ret;
+	u8 req;
+	u16 value1;
+	u16 index;
+	int blen;
+
+	deb_info("%s %d", __func__, slot);
+	if (slot != 0)
+		return -EINVAL;
+
+	mutex_lock(&state->ca_mutex);
+	req = 0xC2;
+	value1 = address;
+	index = value;
+	blen = 0;
+
+	ret = az6027_usb_out_op(d, req, value1, index, NULL, blen);
+	if (ret != 0)
+		warn("usb out operation failed. (%d)", ret);
+
+	mutex_unlock(&state->ca_mutex);
+	return ret;
+}
+
+static int az6027_ci_read_cam_control(struct dvb_ca_en50221 *ca,
+				      int slot,
+				      u8 address)
+{
+	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+	int ret;
+	u8 req;
+	u16 value;
+	u16 index;
+	int blen;
+	u8 b[12];
+
+	if (slot != 0)
+		return -EINVAL;
+
+	mutex_lock(&state->ca_mutex);
+
+	req = 0xC3;
+	value = address;
+	index = 0;
+	blen = 2;
+
+	ret = az6027_usb_in_op(d, req, value, index, b, blen);
+	if (ret < 0) {
+		warn("usb in operation failed. (%d)", ret);
+		ret = -EINVAL;
+	} else {
+		if (b[0] == 0)
+			warn("Read CI IO error");
+
+		ret = b[1];
+		deb_info("read cam data = %x from 0x%x", b[1], value);
+	}
+
+	mutex_unlock(&state->ca_mutex);
+	return ret;
+}
+
+static int az6027_ci_write_cam_control(struct dvb_ca_en50221 *ca,
+				       int slot,
+				       u8 address,
+				       u8 value)
+{
+	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+	int ret;
+	u8 req;
+	u16 value1;
+	u16 index;
+	int blen;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	mutex_lock(&state->ca_mutex);
+	req = 0xC4;
+	value1 = address;
+	index = value;
+	blen = 0;
+
+	ret = az6027_usb_out_op(d, req, value1, index, NULL, blen);
+	if (ret != 0) {
+		warn("usb out operation failed. (%d)", ret);
+		goto failed;
+	}
+
+failed:
+	mutex_unlock(&state->ca_mutex);
+	return ret;
+}
+
+static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+
+	int ret;
+	u8 req;
+	u16 value;
+	u16 index;
+	int blen;
+	u8 b[12];
+
+	req = 0xC8;
+	value = 0;
+	index = 0;
+	blen = 1;
+
+	ret = az6027_usb_in_op(d, req, value, index, b, blen);
+	if (ret < 0) {
+		warn("usb in operation failed. (%d)", ret);
+		ret = -EIO;
+	} else{
+		ret = b[0];
+	}
+	return ret;
+}
+
+static int az6027_ci_slot_reset(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+	int ret, i;
+	u8 req;
+	u16 value;
+	u16 index;
+	int blen;
+
+	mutex_lock(&state->ca_mutex);
+
+	req = 0xC6;
+	value = 1;
+	index = 0;
+	blen = 0;
+
+	ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
+	if (ret != 0) {
+		warn("usb out operation failed. (%d)", ret);
+		goto failed;
+	}
+
+	msleep(500);
+	req = 0xC6;
+	value = 0;
+	index = 0;
+	blen = 0;
+
+	ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
+	if (ret != 0) {
+		warn("usb out operation failed. (%d)", ret);
+		goto failed;
+	}
+
+	for (i = 0; i < 15; i++) {
+		msleep(100);
+
+		if (CI_CamReady(ca, slot)) {
+			deb_info("CAM Ready");
+			break;
+		}
+	}
+	msleep(5000);
+
+failed:
+	mutex_unlock(&state->ca_mutex);
+	return ret;
+}
+
+static int az6027_ci_slot_shutdown(struct dvb_ca_en50221 *ca, int slot)
+{
+	return 0;
+}
+
+static int az6027_ci_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot)
+{
+	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+
+	int ret;
+	u8 req;
+	u16 value;
+	u16 index;
+	int blen;
+
+	deb_info("%s", __func__);
+	mutex_lock(&state->ca_mutex);
+	req = 0xC7;
+	value = 1;
+	index = 0;
+	blen = 0;
+
+	ret = az6027_usb_out_op(d, req, value, index, NULL, blen);
+	if (ret != 0) {
+		warn("usb out operation failed. (%d)", ret);
+		goto failed;
+	}
+
+failed:
+	mutex_unlock(&state->ca_mutex);
+	return ret;
+}
+
+static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open)
+{
+	struct dvb_usb_device *d = (struct dvb_usb_device *)ca->data;
+	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+	int ret;
+	u8 req;
+	u16 value;
+	u16 index;
+	int blen;
+	u8 b[12];
+
+	mutex_lock(&state->ca_mutex);
+
+	req = 0xC5;
+	value = 0;
+	index = 0;
+	blen = 1;
+
+	ret = az6027_usb_in_op(d, req, value, index, b, blen);
+	if (ret < 0) {
+		warn("usb in operation failed. (%d)", ret);
+		ret = -EIO;
+	} else
+		ret = 0;
+
+	if (b[0] == 0) {
+		ret = 0;
+
+	} else if (b[0] == 1) {
+		ret = DVB_CA_EN50221_POLL_CAM_PRESENT |
+		      DVB_CA_EN50221_POLL_CAM_READY;
+	}
+
+	mutex_unlock(&state->ca_mutex);
+	return ret;
+}
+
+
+static void az6027_ci_uninit(struct dvb_usb_device *d)
+{
+	struct az6027_device_state *state;
+
+	deb_info("%s", __func__);
+
+	if (NULL == d)
+		return;
+
+	state = (struct az6027_device_state *)d->priv;
+	if (NULL == state)
+		return;
+
+	if (NULL == state->ca.data)
+		return;
+
+	dvb_ca_en50221_release(&state->ca);
+
+	memset(&state->ca, 0, sizeof(state->ca));
+}
+
+
+static int az6027_ci_init(struct dvb_usb_adapter *a)
+{
+	struct dvb_usb_device *d = a->dev;
+	struct az6027_device_state *state = (struct az6027_device_state *)d->priv;
+	int ret;
+
+	deb_info("%s", __func__);
+
+	mutex_init(&state->ca_mutex);
+
+	state->ca.owner			= THIS_MODULE;
+	state->ca.read_attribute_mem	= az6027_ci_read_attribute_mem;
+	state->ca.write_attribute_mem	= az6027_ci_write_attribute_mem;
+	state->ca.read_cam_control	= az6027_ci_read_cam_control;
+	state->ca.write_cam_control	= az6027_ci_write_cam_control;
+	state->ca.slot_reset		= az6027_ci_slot_reset;
+	state->ca.slot_shutdown		= az6027_ci_slot_shutdown;
+	state->ca.slot_ts_enable	= az6027_ci_slot_ts_enable;
+	state->ca.poll_slot_status	= az6027_ci_poll_slot_status;
+	state->ca.data			= d;
+
+	ret = dvb_ca_en50221_init(&a->dvb_adap,
+				  &state->ca,
+				  0, /* flags */
+				  1);/* n_slots */
+	if (ret != 0) {
+		err("Cannot initialize CI: Error %d.", ret);
+		memset(&state->ca, 0, sizeof(state->ca));
+		return ret;
+	}
+
+	deb_info("CI initialized.");
+
+	return 0;
+}
+
+/*
+static int az6027_read_mac_addr(struct dvb_usb_device *d, u8 mac[6])
+{
+	az6027_usb_in_op(d, 0xb7, 6, 0, &mac[0], 6);
+	return 0;
+}
+*/
+
+static int az6027_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+
+	u8 buf;
+	int ret;
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+
+	struct i2c_msg i2c_msg = {
+		.addr	= 0x99,
+		.flags	= 0,
+		.buf	= &buf,
+		.len	= 1
+	};
+
+	/*
+	 * 2   --18v
+	 * 1   --13v
+	 * 0   --off
+	 */
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		buf = 1;
+		ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+		break;
+
+	case SEC_VOLTAGE_18:
+		buf = 2;
+		ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+		break;
+
+	case SEC_VOLTAGE_OFF:
+		buf = 0;
+		ret = i2c_transfer(&adap->dev->i2c_adap, &i2c_msg, 1);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+
+static int az6027_frontend_poweron(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	u8 req;
+	u16 value;
+	u16 index;
+	int blen;
+
+	req = 0xBC;
+	value = 1; /* power on */
+	index = 3;
+	blen = 0;
+
+	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+	if (ret != 0)
+		return -EIO;
+
+	return 0;
+}
+static int az6027_frontend_reset(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	u8 req;
+	u16 value;
+	u16 index;
+	int blen;
+
+	/* reset demodulator */
+	req = 0xC0;
+	value = 1; /* high */
+	index = 3;
+	blen = 0;
+
+	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+	if (ret != 0)
+		return -EIO;
+
+	req = 0xC0;
+	value = 0; /* low */
+	index = 3;
+	blen = 0;
+	msleep_interruptible(200);
+
+	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+	if (ret != 0)
+		return -EIO;
+
+	msleep_interruptible(200);
+
+	req = 0xC0;
+	value = 1; /*high */
+	index = 3;
+	blen = 0;
+
+	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+	if (ret != 0)
+		return -EIO;
+
+	msleep_interruptible(200);
+	return 0;
+}
+
+static int az6027_frontend_tsbypass(struct dvb_usb_adapter *adap, int onoff)
+{
+	int ret;
+	u8 req;
+	u16 value;
+	u16 index;
+	int blen;
+
+	/* TS passthrough */
+	req = 0xC7;
+	value = onoff;
+	index = 0;
+	blen = 0;
+
+	ret = az6027_usb_out_op(adap->dev, req, value, index, NULL, blen);
+	if (ret != 0)
+		return -EIO;
+
+	return 0;
+}
+
+static int az6027_frontend_attach(struct dvb_usb_adapter *adap)
+{
+
+	az6027_frontend_poweron(adap);
+	az6027_frontend_reset(adap);
+
+	deb_info("adap = %p, dev = %p\n", adap, adap->dev);
+	adap->fe = stb0899_attach(&az6027_stb0899_config, &adap->dev->i2c_adap);
+
+	if (adap->fe) {
+		deb_info("found STB0899 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb0899_config.demod_address);
+		if (stb6100_attach(adap->fe, &az6027_stb6100_config, &adap->dev->i2c_adap)) {
+			deb_info("found STB6100 DVB-S/DVB-S2 frontend @0x%02x", az6027_stb6100_config.tuner_address);
+			adap->fe->ops.set_voltage = az6027_set_voltage;
+			az6027_ci_init(adap);
+		} else {
+			adap->fe = NULL;
+		}
+	} else
+		warn("no front-end attached\n");
+
+	az6027_frontend_tsbypass(adap, 0);
+
+	return 0;
+}
+
+static struct dvb_usb_device_properties az6027_properties;
+
+static void az6027_usb_disconnect(struct usb_interface *intf)
+{
+	struct dvb_usb_device *d = usb_get_intfdata(intf);
+	az6027_ci_uninit(d);
+	dvb_usb_device_exit(intf);
+}
+
+
+static int az6027_usb_probe(struct usb_interface *intf,
+			    const struct usb_device_id *id)
+{
+	return dvb_usb_device_init(intf,
+				   &az6027_properties,
+				   THIS_MODULE,
+				   NULL,
+				   adapter_nr);
+}
+
+/* I2C */
+static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int i = 0, j = 0, len = 0;
+	int ret;
+	u16 index;
+	u16 value;
+	int length;
+	u8 req;
+	u8 data[256];
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	if (num > 2)
+		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
+
+	for (i = 0; i < num; i++) {
+
+		if (msg[i].addr == 0x99) {
+			req = 0xBE;
+			index = 0;
+			value = msg[i].buf[0] & 0x00ff;
+			length = 1;
+			az6027_usb_out_op(d, req, value, index, data, length);
+		}
+
+		if (msg[i].addr == 0xd0) {
+			/* write/read request */
+			if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
+				req = 0xB9;
+				index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
+				value = msg[i].addr + (msg[i].len << 8);
+				length = msg[i + 1].len + 6;
+				ret = az6027_usb_in_op(d, req, value, index, data, length);
+				len = msg[i + 1].len;
+				for (j = 0; j < len; j++)
+					msg[i + 1].buf[j] = data[j + 5];
+
+				i++;
+			} else {
+
+				if (msg[i].addr == 0xd0) {
+					/* demod 16bit addr */
+					req = 0xBD;
+					index = (((msg[i].buf[0] << 8) & 0xff00) | (msg[i].buf[1] & 0x00ff));
+					value = msg[i].addr + (2 << 8);
+					length = msg[i].len - 2;
+					len = msg[i].len - 2;
+					for (j = 0; j < len; j++)
+						data[j] = msg[i].buf[j + 2];
+
+				}
+				az6027_usb_out_op(d, req, value, index, data, length);
+			}
+		}
+
+		if (msg[i].addr == 0xc0) {
+			if (msg[i].flags & I2C_M_RD) {
+
+				req = 0xB9;
+				index = 0x0;
+				value = msg[i].addr;
+				length = msg[i].len + 6;
+				ret = az6027_usb_in_op(d, req, value, index, data, length);
+				len = msg[i].len;
+				for (j = 0; j < len; j++)
+					msg[i].buf[j] = data[j + 5];
+
+			} else {
+
+				req = 0xBD;
+				index = msg[i].buf[0] & 0x00FF;
+				value = msg[i].addr + (1 << 8);
+				length = msg[i].len - 1;
+				len = msg[i].len - 1;
+
+				for (j = 0; j < len; j++)
+					data[j] = msg[i].buf[j + 1];
+
+				az6027_usb_out_op(d, req, value, index, data, length);
+			}
+		}
+	}
+	mutex_unlock(&d->i2c_mutex);
+
+	return i;
+}
+
+
+static u32 az6027_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm az6027_i2c_algo = {
+	.master_xfer   = az6027_i2c_xfer,
+	.functionality = az6027_i2c_func,
+};
+
+int az6027_identify_state(struct usb_device *udev,
+			  struct dvb_usb_device_properties *props,
+			  struct dvb_usb_device_description **desc,
+			  int *cold)
+{
+	u8 b[16];
+	s16 ret = usb_control_msg(udev,
+				  usb_rcvctrlpipe(udev, 0),
+				  0xb7,
+				  USB_TYPE_VENDOR | USB_DIR_IN,
+				  6,
+				  0,
+				  b,
+				  6,
+				  USB_CTRL_GET_TIMEOUT);
+
+	*cold = ret <= 0;
+
+	deb_info("cold: %d\n", *cold);
+	return 0;
+}
+
+
+static struct usb_device_id az6027_usb_table[] = {
+	{ USB_DEVICE(USB_VID_AZUREWAVE, USB_PID_AZUREWAVE_AZ6027) },
+	{ USB_DEVICE(USB_VID_TERRATEC,  USB_PID_TERRATEC_DVBS2CI) },
+	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI) },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(usb, az6027_usb_table);
+
+static struct dvb_usb_device_properties az6027_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = CYPRESS_FX2,
+	.firmware            = "dvb-usb-az6027-03.fw",
+	.no_reconnect        = 1,
+
+	.size_of_priv     = sizeof(struct az6027_device_state),
+	.identify_state		= az6027_identify_state,
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = az6027_streaming_ctrl,
+			.frontend_attach  = az6027_frontend_attach,
+
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_BULK,
+				.count = 10,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
+		}
+	},
+/*
+	.power_ctrl       = az6027_power_ctrl,
+	.read_mac_address = az6027_read_mac_addr,
+ */
+	.rc_key_map       = az6027_rc_keys,
+	.rc_key_map_size  = ARRAY_SIZE(az6027_rc_keys),
+	.rc_interval      = 400,
+	.rc_query         = az6027_rc_query,
+	.i2c_algo         = &az6027_i2c_algo,
+
+	.num_device_descs = 1,
+	.devices = {
+		{
+			.name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)",
+			.cold_ids = { &az6027_usb_table[0], NULL },
+			.warm_ids = { NULL },
+		},
+		{ NULL },
+	}
+};
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver az6027_usb_driver = {
+	.name		= "dvb_usb_az6027",
+	.probe 		= az6027_usb_probe,
+	.disconnect 	= az6027_usb_disconnect,
+	.id_table 	= az6027_usb_table,
+};
+
+/* module stuff */
+static int __init az6027_usb_module_init(void)
+{
+	int result;
+
+	result = usb_register(&az6027_usb_driver);
+	if (result) {
+		err("usb_register failed. (%d)", result);
+		return result;
+	}
+
+	return 0;
+}
+
+static void __exit az6027_usb_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&az6027_usb_driver);
+}
+
+module_init(az6027_usb_module_init);
+module_exit(az6027_usb_module_exit);
+
+MODULE_AUTHOR("Adams Xu <Adams.xu@azwave.com.cn>");
+MODULE_DESCRIPTION("Driver for AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/az6027.h b/drivers/media/dvb/dvb-usb/az6027.h
new file mode 100644
index 00000000000..f3afe17f3f3
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/az6027.h
@@ -0,0 +1,14 @@
+#ifndef _DVB_USB_VP6027_H_
+#define _DVB_USB_VP6027_H_
+
+#define DVB_USB_LOG_PREFIX "az6027"
+#include "dvb-usb.h"
+
+
+extern int dvb_usb_az6027_debug;
+#define deb_info(args...) dprintk(dvb_usb_az6027_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_az6027_debug, 0x02, args)
+#define deb_rc(args...)   dprintk(dvb_usb_az6027_debug, 0x04, args)
+#define deb_fe(args...)   dprintk(dvb_usb_az6027_debug, 0x08, args)
+
+#endif
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 05fb28e9c69..a7b8405c291 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -1184,6 +1184,9 @@ static struct atbm8830_config mygica_d689_atbm8830_cfg = {
 	.osc_clk_freq = 30400, /* in kHz */
 	.if_freq = 0, /* zero IF */
 	.zif_swap_iq = 1,
+	.agc_min = 0x2E,
+	.agc_max = 0x90,
+	.agc_hold_loop = 0,
 };
 
 static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap)
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index 495a90577c5..83fc24a6c31 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -42,7 +42,6 @@ struct dib0700_state {
 	u16 mt2060_if1[2];
 	u8 rc_toggle;
 	u8 rc_counter;
-	u8 rc_func_version;
 	u8 is_dib7000pc;
 	u8 fw_use_new_i2c_api;
 	u8 disable_streaming_master_mode;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 0d3c9a9a33b..4f961d2d181 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -471,14 +471,209 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 	return dib0700_ctrl_wr(adap->dev, b, 4);
 }
 
+/* Number of keypresses to ignore before start repeating */
+#define RC_REPEAT_DELAY_V1_20 10
+
+/* This is the structure of the RC response packet starting in firmware 1.20 */
+struct dib0700_rc_response {
+	u8 report_id;
+	u8 data_state;
+	u16 system;
+	u8 data;
+	u8 not_data;
+};
+#define RC_MSG_SIZE_V1_20 6
+
+static void dib0700_rc_urb_completion(struct urb *purb)
+{
+	struct dvb_usb_device *d = purb->context;
+	struct dvb_usb_rc_key *keymap;
+	struct dib0700_state *st;
+	struct dib0700_rc_response poll_reply;
+	u8 *buf;
+	int found = 0;
+	u32 event;
+	int state;
+	int i;
+
+	deb_info("%s()\n", __func__);
+	if (d == NULL)
+		return;
+
+	if (d->rc_input_dev == NULL) {
+		/* This will occur if disable_rc_polling=1 */
+		usb_free_urb(purb);
+		return;
+	}
+
+	keymap = d->props.rc_key_map;
+	st = d->priv;
+	buf = (u8 *)purb->transfer_buffer;
+
+	if (purb->status < 0) {
+		deb_info("discontinuing polling\n");
+		usb_free_urb(purb);
+		return;
+	}
+
+	if (purb->actual_length != RC_MSG_SIZE_V1_20) {
+		deb_info("malformed rc msg size=%d\n", purb->actual_length);
+		goto resubmit;
+	}
+
+	/* Set initial results in case we exit the function early */
+	event = 0;
+	state = REMOTE_NO_KEY_PRESSED;
+
+	deb_data("IR raw %02X %02X %02X %02X %02X %02X (len %d)\n", buf[0],
+		 buf[1], buf[2], buf[3], buf[4], buf[5], purb->actual_length);
+
+	switch (dvb_usb_dib0700_ir_proto) {
+	case 0:
+		/* NEC Protocol */
+		poll_reply.report_id  = 0;
+		poll_reply.data_state = 1;
+		poll_reply.system     = buf[2];
+		poll_reply.data       = buf[4];
+		poll_reply.not_data   = buf[5];
+
+		/* NEC protocol sends repeat code as 0 0 0 FF */
+		if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00)
+		    && (poll_reply.not_data == 0xff)) {
+			poll_reply.data_state = 2;
+			break;
+		}
+		break;
+	default:
+		/* RC5 Protocol */
+		poll_reply.report_id  = buf[0];
+		poll_reply.data_state = buf[1];
+		poll_reply.system     = (buf[2] << 8) | buf[3];
+		poll_reply.data       = buf[4];
+		poll_reply.not_data   = buf[5];
+		break;
+	}
+
+	if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+		/* Key failed integrity check */
+		err("key failed integrity check: %04x %02x %02x",
+		    poll_reply.system,
+		    poll_reply.data, poll_reply.not_data);
+		goto resubmit;
+	}
+
+	deb_data("rid=%02x ds=%02x sm=%04x d=%02x nd=%02x\n",
+		 poll_reply.report_id, poll_reply.data_state,
+		 poll_reply.system, poll_reply.data, poll_reply.not_data);
+
+	/* Find the key in the map */
+	for (i = 0; i < d->props.rc_key_map_size; i++) {
+		if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) &&
+		    rc5_data(&keymap[i]) == poll_reply.data) {
+			event = keymap[i].event;
+			found = 1;
+			break;
+		}
+	}
+
+	if (found == 0) {
+		err("Unknown remote controller key: %04x %02x %02x",
+		    poll_reply.system, poll_reply.data, poll_reply.not_data);
+		d->last_event = 0;
+		goto resubmit;
+	}
+
+	if (poll_reply.data_state == 1) {
+		/* New key hit */
+		st->rc_counter = 0;
+		event = keymap[i].event;
+		state = REMOTE_KEY_PRESSED;
+		d->last_event = keymap[i].event;
+	} else if (poll_reply.data_state == 2) {
+		/* Key repeated */
+		st->rc_counter++;
+
+		/* prevents unwanted double hits */
+		if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
+			event = d->last_event;
+			state = REMOTE_KEY_PRESSED;
+			st->rc_counter = RC_REPEAT_DELAY_V1_20;
+		}
+	} else {
+		err("Unknown data state [%d]", poll_reply.data_state);
+	}
+
+	switch (state) {
+	case REMOTE_NO_KEY_PRESSED:
+		break;
+	case REMOTE_KEY_PRESSED:
+		deb_info("key pressed\n");
+		d->last_event = event;
+	case REMOTE_KEY_REPEAT:
+		deb_info("key repeated\n");
+		input_event(d->rc_input_dev, EV_KEY, event, 1);
+		input_sync(d->rc_input_dev);
+		input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
+		input_sync(d->rc_input_dev);
+		break;
+	default:
+		break;
+	}
+
+resubmit:
+	/* Clean the buffer before we requeue */
+	memset(purb->transfer_buffer, 0, RC_MSG_SIZE_V1_20);
+
+	/* Requeue URB */
+	usb_submit_urb(purb, GFP_ATOMIC);
+}
+
 int dib0700_rc_setup(struct dvb_usb_device *d)
 {
+	struct dib0700_state *st = d->priv;
 	u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0};
-	int i = dib0700_ctrl_wr(d, rc_setup, 3);
+	struct urb *purb;
+	int ret;
+	int i;
+
+	if (d->props.rc_key_map == NULL)
+		return 0;
+
+	/* Set the IR mode */
+	i = dib0700_ctrl_wr(d, rc_setup, 3);
 	if (i<0) {
 		err("ir protocol setup failed");
 		return -1;
 	}
+
+	if (st->fw_version < 0x10200)
+		return 0;
+
+	/* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
+	purb = usb_alloc_urb(0, GFP_KERNEL);
+	if (purb == NULL) {
+		err("rc usb alloc urb failed\n");
+		return -1;
+	}
+
+	purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
+	if (purb->transfer_buffer == NULL) {
+		err("rc kzalloc failed\n");
+		usb_free_urb(purb);
+		return -1;
+	}
+
+	purb->status = -EINPROGRESS;
+	usb_fill_bulk_urb(purb, d->udev, usb_rcvbulkpipe(d->udev, 1),
+			  purb->transfer_buffer, RC_MSG_SIZE_V1_20,
+			  dib0700_rc_urb_completion, d);
+
+	ret = usb_submit_urb(purb, GFP_ATOMIC);
+	if (ret != 0) {
+		err("rc submit urb failed\n");
+		return -1;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 44972d01bbd..34eab05afc6 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -472,20 +472,25 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 };
 
 /* Number of keypresses to ignore before start repeating */
 #define RC_REPEAT_DELAY 6
-#define RC_REPEAT_DELAY_V1_20 10
 
-
-
-/* Used by firmware versions < 1.20 (deprecated) */
-static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
-				   int *state)
+static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	u8 key[4];
 	int i;
 	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
 	struct dib0700_state *st = d->priv;
+
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
+
+	if (st->fw_version >= 0x10200) {
+		/* For 1.20 firmware , We need to keep the RC polling
+		   callback so we can reuse the input device setup in
+		   dvb-usb-remote.c.  However, the actual work is being done
+		   in the bulk URB completion handler. */
+		return 0;
+	}
+
 	i=dib0700_ctrl_rd(d,rc_request,2,key,4);
 	if (i<=0) {
 		err("RC Query Failed");
@@ -557,149 +562,6 @@ static int dib0700_rc_query_legacy(struct dvb_usb_device *d, u32 *event,
 	return 0;
 }
 
-/* This is the structure of the RC response packet starting in firmware 1.20 */
-struct dib0700_rc_response {
-	u8 report_id;
-	u8 data_state;
-	u16 system;
-	u8 data;
-	u8 not_data;
-};
-
-/* This supports the new IR response format for firmware v1.20 */
-static int dib0700_rc_query_v1_20(struct dvb_usb_device *d, u32 *event,
-				  int *state)
-{
-	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
-	struct dib0700_state *st = d->priv;
-	struct dib0700_rc_response poll_reply;
-	u8 buf[6];
-	int i;
-	int status;
-	int actlen;
-	int found = 0;
-
-	/* Set initial results in case we exit the function early */
-	*event = 0;
-	*state = REMOTE_NO_KEY_PRESSED;
-
-	/* Firmware v1.20 provides RC data via bulk endpoint 1 */
-	status = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 1), buf,
-			      sizeof(buf), &actlen, 50);
-	if (status < 0) {
-		/* No data available (meaning no key press) */
-		return 0;
-	}
-
-
-	switch (dvb_usb_dib0700_ir_proto) {
-	case 0:
-		poll_reply.report_id  = 0;
-		poll_reply.data_state = 1;
-		poll_reply.system     = buf[2];
-		poll_reply.data       = buf[4];
-		poll_reply.not_data   = buf[5];
-
-		/* NEC protocol sends repeat code as 0 0 0 FF */
-		if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00)
-		    && (poll_reply.not_data == 0xff)) {
-			poll_reply.data_state = 2;
-			break;
-		}
-		break;
-	default:
-	if (actlen != sizeof(buf)) {
-		/* We didn't get back the 6 byte message we expected */
-		err("Unexpected RC response size [%d]", actlen);
-		return -1;
-	}
-
-	poll_reply.report_id  = buf[0];
-	poll_reply.data_state = buf[1];
-		poll_reply.system     = (buf[2] << 8) | buf[3];
-	poll_reply.data       = buf[4];
-	poll_reply.not_data   = buf[5];
-
-		break;
-	}
-
-	if ((poll_reply.data + poll_reply.not_data) != 0xff) {
-		/* Key failed integrity check */
-		err("key failed integrity check: %04x %02x %02x",
-		    poll_reply.system,
-		    poll_reply.data, poll_reply.not_data);
-		return -1;
-	}
-
-
-	/* Find the key in the map */
-	for (i = 0; i < d->props.rc_key_map_size; i++) {
-		if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) &&
-			rc5_data(&keymap[i]) == poll_reply.data) {
-			*event = keymap[i].event;
-			found = 1;
-			break;
-		}
-	}
-
-	if (found == 0) {
-		err("Unknown remote controller key: %04x %02x %02x",
-			poll_reply.system,
-			poll_reply.data, poll_reply.not_data);
-		d->last_event = 0;
-		return 0;
-	}
-
-	if (poll_reply.data_state == 1) {
-		/* New key hit */
-		st->rc_counter = 0;
-		*event = keymap[i].event;
-		*state = REMOTE_KEY_PRESSED;
-		d->last_event = keymap[i].event;
-	} else if (poll_reply.data_state == 2) {
-		/* Key repeated */
-		st->rc_counter++;
-
-		/* prevents unwanted double hits */
-		if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
-			*event = d->last_event;
-			*state = REMOTE_KEY_PRESSED;
-			st->rc_counter = RC_REPEAT_DELAY_V1_20;
-		}
-	} else {
-		err("Unknown data state [%d]", poll_reply.data_state);
-	}
-
-	return 0;
-}
-
-static int dib0700_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
-{
-	struct dib0700_state *st = d->priv;
-
-	/* Because some people may have improperly named firmware files,
-	   let's figure out whether to use the new firmware call or the legacy
-	   call based on the firmware version embedded in the file */
-	if (st->rc_func_version == 0) {
-		u32 hwver, romver, ramver, fwtype;
-		int ret = dib0700_get_version(d, &hwver, &romver, &ramver,
-					      &fwtype);
-		if (ret < 0) {
-			err("Could not determine version info");
-			return -1;
-		}
-		if (ramver < 0x10200)
-			st->rc_func_version = 1;
-		else
-			st->rc_func_version = 2;
-	}
-
-	if (st->rc_func_version == 2)
-		return dib0700_rc_query_v1_20(d, event, state);
-	else
-		return dib0700_rc_query_legacy(d, event, state);
-}
-
 static struct dvb_usb_rc_key dib0700_rc_keys[] = {
 	/* Key codes for the tiny Pinnacle remote*/
 	{ 0x0700, KEY_MUTE },
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index bc3581d58ce..ae8b57acfe0 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -64,6 +64,8 @@
 #define USB_VID_HUMAX_COEX			0x10b9
 #define USB_VID_774				0x7a69
 #define USB_VID_EVOLUTEPC			0x1e59
+#define USB_VID_AZUREWAVE			0x13d3
+#define USB_VID_TECHNISAT			0x14f7
 
 /* Product IDs */
 #define USB_PID_ADSTECH_USB2_COLD			0xa333
@@ -138,6 +140,7 @@
 #define USB_PID_TWINHAN_VP7021_COLD			0x3207
 #define USB_PID_TWINHAN_VP7021_WARM			0x3208
 #define USB_PID_TINYTWIN				0x3226
+#define USB_PID_TINYTWIN_2				0xe402
 #define USB_PID_DNTV_TINYUSB2_COLD			0x3223
 #define USB_PID_DNTV_TINYUSB2_WARM			0x3224
 #define USB_PID_ULTIMA_TVBOX_COLD			0x8105
@@ -209,6 +212,7 @@
 #define USB_PID_PINNACLE_PCTV71E			0x022b
 #define USB_PID_PINNACLE_PCTV72E			0x0236
 #define USB_PID_PINNACLE_PCTV73E			0x0237
+#define USB_PID_PINNACLE_PCTV310E			0x3211
 #define USB_PID_PINNACLE_PCTV801E			0x023a
 #define USB_PID_PINNACLE_PCTV801E_SE			0x023b
 #define USB_PID_PINNACLE_PCTV73A			0x0243
@@ -248,6 +252,7 @@
 #define USB_PID_DIGIVOX_MINI_SL_WARM			0xe361
 #define USB_PID_GRANDTEC_DVBT_USB2_COLD			0x0bc6
 #define USB_PID_GRANDTEC_DVBT_USB2_WARM			0x0bc7
+#define USB_PID_WINFAST_DTV2000DS			0x6a04
 #define USB_PID_WINFAST_DTV_DONGLE_COLD			0x6025
 #define USB_PID_WINFAST_DTV_DONGLE_WARM			0x6026
 #define USB_PID_WINFAST_DTV_DONGLE_STK7700P		0x6f00
@@ -290,5 +295,7 @@
 #define USB_PID_FRIIO_WHITE				0x0001
 #define USB_PID_TVWAY_PLUS				0x0002
 #define USB_PID_SVEON_STV20				0xe39d
-
+#define USB_PID_AZUREWAVE_AZ6027			0x3275
+#define USB_PID_TERRATEC_DVBS2CI			0x3275
+#define USB_PID_TECHNISAT_USB2_HDCI			0x0002
 #endif
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
index e331db8c77b..5d91f70d2d2 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c
@@ -243,7 +243,7 @@ int dvb_usb_device_init(struct usb_interface *intf,
 		d = kzalloc(sizeof(struct dvb_usb_device),GFP_KERNEL);
 	if (d == NULL) {
 		err("no memory for 'struct dvb_usb_device'");
-		return ret;
+		return -ENOMEM;
 	}
 
 	d->udev = udev;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index 6b5ded9e7d5..a03ef7efec9 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -107,6 +107,7 @@ static void dvb_usb_read_remote_control(struct work_struct *work)
 		case REMOTE_KEY_REPEAT:
 			deb_rc("key repeated\n");
 			input_event(d->rc_input_dev, EV_KEY, event, 1);
+			input_sync(d->rc_input_dev);
 			input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
 			input_sync(d->rc_input_dev);
 			break;
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index 64132c0cf80..accc65509b0 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -1,6 +1,7 @@
 /* DVB USB framework compliant Linux driver for the
 *	DVBWorld DVB-S 2101, 2102, DVB-S2 2104, DVB-C 3101,
-*	TeVii S600, S630, S650 Cards
+*	TeVii S600, S630, S650,
+*	Prof 1100, 7500 Cards
 * Copyright (C) 2008,2009 Igor M. Liplianin (liplianin@me.by)
 *
 *	This program is free software; you can redistribute it and/or modify it
@@ -469,11 +470,13 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 								int num)
 {
 	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	struct usb_device *udev;
 	int ret = 0;
 	int len, i, j;
 
 	if (!d)
 		return -ENODEV;
+	udev = d->udev;
 	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
 		return -EAGAIN;
 
@@ -488,8 +491,13 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 		}
 		case (DW2102_VOLTAGE_CTRL): {
 			u8 obuf[2];
+
+			obuf[0] = 1;
+			obuf[1] = msg[j].buf[1];/* off-on */
+			ret = dw210x_op_rw(d->udev, 0x8a, 0, 0,
+					obuf, 2, DW210X_WRITE_MSG);
 			obuf[0] = 3;
-			obuf[1] = msg[j].buf[0];
+			obuf[1] = msg[j].buf[0];/* 13v-18v */
 			ret = dw210x_op_rw(d->udev, 0x8a, 0, 0,
 					obuf, 2, DW210X_WRITE_MSG);
 			break;
@@ -527,6 +535,17 @@ static int s6x0_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 					i += 16;
 					len -= 16;
 				} while (len > 0);
+			} else if ((udev->descriptor.idProduct == 0x7500)
+					&& (j < (num - 1))) {
+				/* write register addr before read */
+				u8 obuf[msg[j].len + 2];
+				obuf[0] = msg[j + 1].len;
+				obuf[1] = (msg[j].addr << 1);
+				memcpy(obuf + 2, msg[j].buf, msg[j].len);
+				ret = dw210x_op_rw(d->udev, 0x92, 0, 0,
+						obuf, msg[j].len + 2,
+						DW210X_WRITE_MSG);
+				break;
 			} else {
 				/* write registers */
 				u8 obuf[msg[j].len + 2];
@@ -651,18 +670,25 @@ static int s6x0_read_mac_address(struct dvb_usb_device *d, u8 mac[6])
 
 static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
-	static u8 command_13v[1] = {0x00};
-	static u8 command_18v[1] = {0x01};
-	struct i2c_msg msg[] = {
-		{.addr = DW2102_VOLTAGE_CTRL, .flags = 0,
-			.buf = command_13v, .len = 1},
+	static u8 command_13v[] = {0x00, 0x01};
+	static u8 command_18v[] = {0x01, 0x01};
+	static u8 command_off[] = {0x00, 0x00};
+	struct i2c_msg msg = {
+		.addr = DW2102_VOLTAGE_CTRL,
+		.flags = 0,
+		.buf = command_off,
+		.len = 2,
 	};
 
 	struct dvb_usb_adapter *udev_adap =
 		(struct dvb_usb_adapter *)(fe->dvb->priv);
 	if (voltage == SEC_VOLTAGE_18)
-		msg[0].buf = command_18v;
-	i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
+		msg.buf = command_18v;
+	else if (voltage == SEC_VOLTAGE_13)
+		msg.buf = command_13v;
+
+	i2c_transfer(&udev_adap->dev->i2c_adap, &msg, 1);
+
 	return 0;
 }
 
@@ -735,6 +761,18 @@ static struct stv6110_config dw2104_stv6110_config = {
 	.clk_div = 1,
 };
 
+static struct stv0900_config prof_7500_stv0900_config = {
+	.demod_address = 0x6a,
+	.demod_mode = 0,
+	.xtal = 27000000,
+	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+	.diseqc_mode = 2,/* 2/3 PWM */
+	.tun1_maddress = 0,/* 0x60 */
+	.tun1_adc = 0,/* 2 Vpp */
+	.path1_mode = 3,
+	.tun1_type = 3,
+};
+
 static int dw2104_frontend_attach(struct dvb_usb_adapter *d)
 {
 	struct dvb_tuner_ops *tuner_ops = NULL;
@@ -882,6 +920,19 @@ static int s6x0_frontend_attach(struct dvb_usb_adapter *d)
 	return -EIO;
 }
 
+static int prof_7500_frontend_attach(struct dvb_usb_adapter *d)
+{
+	d->fe = dvb_attach(stv0900_attach, &prof_7500_stv0900_config,
+					&d->dev->i2c_adap, 0);
+	if (d->fe == NULL)
+		return -EIO;
+	d->fe->ops.set_voltage = dw210x_set_voltage;
+
+	info("Attached STV0900+STB6100A!\n");
+
+	return 0;
+}
+
 static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	dvb_attach(dvb_pll_attach, adap->fe, 0x60,
@@ -1073,6 +1124,7 @@ static struct usb_device_id dw2102_table[] = {
 	{USB_DEVICE(0x9022, USB_PID_TEVII_S630)},
 	{USB_DEVICE(0x3011, USB_PID_PROF_1100)},
 	{USB_DEVICE(0x9022, USB_PID_TEVII_S660)},
+	{USB_DEVICE(0x3034, 0x7500)},
 	{ }
 };
 
@@ -1387,9 +1439,30 @@ static struct dvb_usb_device_properties s6x0_properties = {
 	}
 };
 
+struct dvb_usb_device_properties *p7500;
+static struct dvb_usb_device_description d7500 = {
+	"Prof 7500 USB DVB-S2",
+	{&dw2102_table[9], NULL},
+	{NULL},
+};
+
 static int dw2102_probe(struct usb_interface *intf,
 		const struct usb_device_id *id)
 {
+
+	p7500 = kzalloc(sizeof(struct dvb_usb_device_properties), GFP_KERNEL);
+	if (!p7500)
+		return -ENOMEM;
+	/* copy default structure */
+	memcpy(p7500, &s6x0_properties,
+			sizeof(struct dvb_usb_device_properties));
+	/* fill only different fields */
+	p7500->firmware = "dvb-usb-p7500.fw";
+	p7500->devices[0] = d7500;
+	p7500->rc_key_map = tbs_rc_keys;
+	p7500->rc_key_map_size = ARRAY_SIZE(tbs_rc_keys);
+	p7500->adapter->frontend_attach = prof_7500_frontend_attach;
+
 	if (0 == dvb_usb_device_init(intf, &dw2102_properties,
 			THIS_MODULE, NULL, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &dw2104_properties,
@@ -1397,6 +1470,8 @@ static int dw2102_probe(struct usb_interface *intf,
 	    0 == dvb_usb_device_init(intf, &dw3101_properties,
 			THIS_MODULE, NULL, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf, &s6x0_properties,
+			THIS_MODULE, NULL, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf, p7500,
 			THIS_MODULE, NULL, adapter_nr))
 		return 0;
 
@@ -1431,6 +1506,6 @@ MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
 MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101, 2102, DVB-S2 2104,"
 				" DVB-C 3101 USB2.0,"
 				" TeVii S600, S630, S650, S660 USB2.0,"
-				" Prof 1100 USB2.0 devices");
+				" Prof 1100, 7500 USB2.0 devices");
 MODULE_VERSION("0.1");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
index ebb7b9fd115..d14bd227b50 100644
--- a/drivers/media/dvb/dvb-usb/friio-fe.c
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -366,7 +366,7 @@ static u8 init_code[][2] = {
 	{0x76, 0x0C},
 };
 
-const static int init_code_len = sizeof(init_code) / sizeof(u8[2]);
+static const int init_code_len = sizeof(init_code) / sizeof(u8[2]);
 
 static int jdvbt90502_init(struct dvb_frontend *fe)
 {
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index ef9b7bed13f..737ffa36ac9 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -16,6 +16,9 @@
 #include "qt1010.h"
 #include "tda1004x.h"
 #include "tda827x.h"
+
+#include <media/tuner.h>
+#include "tuner-simple.h"
 #include <asm/unaligned.h>
 
 /* debug */
@@ -158,11 +161,14 @@ static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 
 			case 0x93:
 			case 0x92:
+			case 0x83: /* pinnacle PCTV310e */
+			case 0x82:
 				m->rep_count = 0;
 				*state = REMOTE_KEY_PRESSED;
 				goto unlock;
 
 			case 0x91:
+			case 0x81: /* pinnacle PCTV310e */
 				/* prevent immediate auto-repeat */
 				if (++m->rep_count > 2)
 					*state = REMOTE_KEY_REPEAT;
@@ -546,6 +552,14 @@ static int m920x_tda8275_61_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
+static int m920x_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	dvb_attach(simple_tuner_attach, adap->fe,
+		   &adap->dev->i2c_adap, 0x61,
+		   TUNER_PHILIPS_FMD1216ME_MK3);
+	return 0;
+}
+
 /* device-specific initialization */
 static struct m920x_inits megasky_rc_init [] = {
 	{ M9206_RC_INIT2, 0xa8 },
@@ -562,6 +576,18 @@ static struct m920x_inits tvwalkertwin_rc_init [] = {
 	{ } /* terminating entry */
 };
 
+static struct m920x_inits pinnacle310e_init[] = {
+	/* without these the tuner don't work */
+	{ 0xff20,         0x9b },
+	{ 0xff22,         0x70 },
+
+	/* rc settings */
+	{ 0xff50,         0x80 },
+	{ M9206_RC_INIT1, 0x00 },
+	{ M9206_RC_INIT2, 0xff },
+	{ } /* terminating entry */
+};
+
 /* ir keymaps */
 static struct dvb_usb_rc_key megasky_rc_keys [] = {
 	{ 0x0012, KEY_POWER },
@@ -602,11 +628,68 @@ static struct dvb_usb_rc_key tvwalkertwin_rc_keys [] = {
 	{ 0x001e, KEY_VOLUMEUP },
 };
 
+static struct dvb_usb_rc_key pinnacle310e_rc_keys[] = {
+	{ 0x16, KEY_POWER },
+	{ 0x17, KEY_FAVORITES },
+	{ 0x0f, KEY_TEXT },
+	{ 0x48, KEY_MEDIA },		/* preview */
+	{ 0x1c, KEY_EPG },
+	{ 0x04, KEY_LIST },			/* record list */
+	{ 0x03, KEY_1 },
+	{ 0x01, KEY_2 },
+	{ 0x06, KEY_3 },
+	{ 0x09, KEY_4 },
+	{ 0x1d, KEY_5 },
+	{ 0x1f, KEY_6 },
+	{ 0x0d, KEY_7 },
+	{ 0x19, KEY_8 },
+	{ 0x1b, KEY_9 },
+	{ 0x15, KEY_0 },
+	{ 0x0c, KEY_CANCEL },
+	{ 0x4a, KEY_CLEAR },
+	{ 0x13, KEY_BACK },
+	{ 0x00, KEY_TAB },
+	{ 0x4b, KEY_UP },
+	{ 0x4e, KEY_LEFT },
+	{ 0x52, KEY_RIGHT },
+	{ 0x51, KEY_DOWN },
+	{ 0x4f, KEY_ENTER },		/* could also be KEY_OK */
+	{ 0x1e, KEY_VOLUMEUP },
+	{ 0x0a, KEY_VOLUMEDOWN },
+	{ 0x05, KEY_CHANNELUP },
+	{ 0x02, KEY_CHANNELDOWN },
+	{ 0x11, KEY_RECORD },
+	{ 0x14, KEY_PLAY },
+	{ 0x4c, KEY_PAUSE },
+	{ 0x1a, KEY_STOP },
+	{ 0x40, KEY_REWIND },
+	{ 0x12, KEY_FASTFORWARD },
+	{ 0x41, KEY_PREVIOUSSONG },	/* Replay */
+	{ 0x42, KEY_NEXTSONG },		/* Skip */
+	{ 0x54, KEY_CAMERA },		/* Capture */
+/*	{ 0x50, KEY_SAP },	*/		/* Sap */
+	{ 0x47, KEY_CYCLEWINDOWS },	/* Pip */
+	{ 0x4d, KEY_SCREEN },		/* FullScreen */
+	{ 0x08, KEY_SUBTITLE },
+	{ 0x0e, KEY_MUTE },
+/*	{ 0x49, KEY_LR },	*/		/* L/R */
+	{ 0x07, KEY_SLEEP },		/* Hibernate */
+	{ 0x08, KEY_MEDIA },		/* A/V */
+	{ 0x0e, KEY_MENU },			/* Recall */
+	{ 0x45, KEY_ZOOMIN },
+	{ 0x46, KEY_ZOOMOUT },
+	{ 0x18, KEY_TV },			/* Red */
+	{ 0x53, KEY_VCR },			/* Green */
+	{ 0x5e, KEY_SAT },			/* Yellow */
+	{ 0x5f, KEY_PLAYER },		/* Blue */
+};
+
 /* DVB USB Driver stuff */
 static struct dvb_usb_device_properties megasky_properties;
 static struct dvb_usb_device_properties digivox_mini_ii_properties;
 static struct dvb_usb_device_properties tvwalkertwin_properties;
 static struct dvb_usb_device_properties dposh_properties;
+static struct dvb_usb_device_properties pinnacle_pctv310e_properties;
 
 static int m920x_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
@@ -652,6 +735,13 @@ static int m920x_probe(struct usb_interface *intf,
 			goto found;
 		}
 
+		ret = dvb_usb_device_init(intf, &pinnacle_pctv310e_properties,
+					  THIS_MODULE, &d, adapter_nr);
+		if (ret == 0) {
+			rc_init_seq = pinnacle310e_init;
+			goto found;
+		}
+
 		return ret;
 	} else {
 		/* Another interface on a multi-tuner device */
@@ -682,6 +772,7 @@ static struct usb_device_id m920x_table [] = {
 			     USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM) },
 		{ USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_COLD) },
 		{ USB_DEVICE(USB_VID_DPOSH, USB_PID_DPOSH_M9206_WARM) },
+		{ USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_PINNACLE_PCTV310E) },
 		{ }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, m920x_table);
@@ -895,6 +986,56 @@ static struct dvb_usb_device_properties dposh_properties = {
 	 }
 };
 
+static struct dvb_usb_device_properties pinnacle_pctv310e_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl = DEVICE_SPECIFIC,
+	.download_firmware = NULL,
+
+	.rc_interval      = 100,
+	.rc_key_map       = pinnacle310e_rc_keys,
+	.rc_key_map_size  = ARRAY_SIZE(pinnacle310e_rc_keys),
+	.rc_query         = m920x_rc_query,
+
+	.size_of_priv     = sizeof(struct m920x_state),
+
+	.identify_state   = m920x_identify_state,
+	.num_adapters = 1,
+	.adapter = {{
+		.caps = DVB_USB_ADAP_HAS_PID_FILTER |
+			DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+
+		.pid_filter_count = 8,
+		.pid_filter       = m920x_pid_filter,
+		.pid_filter_ctrl  = m920x_pid_filter_ctrl,
+
+		.frontend_attach  = m920x_mt352_frontend_attach,
+		.tuner_attach     = m920x_fmd1216me_tuner_attach,
+
+		.stream = {
+			.type = USB_ISOC,
+			.count = 5,
+			.endpoint = 0x84,
+			.u = {
+				.isoc = {
+					.framesperurb = 128,
+					.framesize = 564,
+					.interval = 1,
+				}
+			}
+		},
+	} },
+	.i2c_algo         = &m920x_i2c_algo,
+
+	.num_device_descs = 1,
+	.devices = {
+		{   "Pinnacle PCTV 310e",
+			{ &m920x_table[6], NULL },
+			{ NULL },
+		}
+	}
+};
+
 static struct usb_driver m920x_driver = {
 	.name		= "dvb_usb_m920x",
 	.probe		= m920x_probe,
diff --git a/drivers/media/dvb/dvb-usb/m920x.h b/drivers/media/dvb/dvb-usb/m920x.h
index 37532890acc..3c061518ffc 100644
--- a/drivers/media/dvb/dvb-usb/m920x.h
+++ b/drivers/media/dvb/dvb-usb/m920x.h
@@ -18,7 +18,7 @@
 #define M9206_FW	0x30
 
 #define M9206_MAX_FILTERS 8
-#define M9206_MAX_ADAPTERS 2
+#define M9206_MAX_ADAPTERS 4
 
 /*
 sequences found in logs:
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
index d4e23094167..830557696ae 100644
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -138,7 +138,7 @@ static int opera1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 					(msg[i].addr<<1)|(msg[i].flags&I2C_M_RD?0x01:0),
 					msg[i].buf,
 					msg[i].len
-					)!= msg[i].len)) {
+					)) != msg[i].len) {
 			break;
 		}
 		if (dvb_usb_opera1_debug & 0x10)