[media] it913x: support for different tuner regs

There appears to be differences in the tuner registers
on earlier IT9135 devices.

Using the current IT9137 settings cause corruptions on
some channels

This patch is in preparation for multi firmware loading and
current unsupported types.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 35 insertions, 2 deletions

diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c
index 24f04b4ac87..d57e0626369 100644
--- a/drivers/media/dvb/dvb-usb/it913x.c
+++ b/drivers/media/dvb/dvb-usb/it913x.c
@@ -338,6 +338,31 @@ static int it913x_rc_query(struct dvb_usb_device *d)
 	return ret;
 }
 
+static int ite_firmware_select(struct usb_device *udev,
+	struct dvb_usb_device_properties *props)
+{
+	int sw;
+	/* auto switch */
+	if (le16_to_cpu(udev->descriptor.idProduct) ==
+			USB_PID_ITETECH_IT9135)
+		sw = IT9135_V1_FW;
+	else
+		sw = IT9137_FW;
+
+	switch (sw) {
+	case IT9135_V1_FW:
+		it913x_config.firmware_ver = 0;
+		it913x_config.adc_x2 = 1;
+		break;
+	case IT9137_FW:
+	default:
+		it913x_config.firmware_ver = 0;
+		it913x_config.adc_x2 = 0;
+	}
+
+	return 0;
+}
+
 #define TS_MPEG_PKT_SIZE	188
 #define EP_LOW			21
 #define TS_BUFFER_SIZE_PID	(EP_LOW*TS_MPEG_PKT_SIZE)
@@ -392,6 +417,8 @@ static int it913x_identify_state(struct usb_device *udev,
 		props->adapter[1].fe[0].stream.u.bulk.buffersize =
 			props->adapter[0].fe[0].stream.u.bulk.buffersize;
 
+	ret = ite_firmware_select(udev, props);
+
 	if (firm_no > 0) {
 		*cold = 0;
 		return 0;
@@ -421,10 +448,16 @@ static int it913x_identify_state(struct usb_device *udev,
 
 	if (it913x_config.dual_mode) {
 		ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, CHIP2_I2C_ADDR);
-		ret |= it913x_wr_reg(udev, DEV_0,  CLK_O_EN, 0x1);
+		if (it913x_config.firmware_ver == 1)
+			ret |= it913x_wr_reg(udev, DEV_0,  0xcfff, 0x1);
+		else
+			ret |= it913x_wr_reg(udev, DEV_0,  CLK_O_EN, 0x1);
 	} else {
 		ret |= it913x_wr_reg(udev, DEV_0, 0x4bfb, 0x0);
-		ret |= it913x_wr_reg(udev, DEV_0,  CLK_O_EN, 0x0);
+		if (it913x_config.firmware_ver == 1)
+			ret |= it913x_wr_reg(udev, DEV_0,  0xcfff, 0x0);
+		else
+			ret |= it913x_wr_reg(udev, DEV_0,  CLK_O_EN, 0x0);
 	}
 
 	*cold = 1;