Merge branch 'linus' into x86/paravirt-spinlocks

13 files changed, 1116 insertions, 72 deletions

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index f00a0eb4042..a577c0f89f6 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -76,6 +76,7 @@ config DVB_USB_DIB0700
 	select DVB_DIB3000MC
 	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
 	select DVB_TUNER_DIB0070
 	help
 	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
@@ -107,6 +108,8 @@ config DVB_USB_CXUSB
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
@@ -120,6 +123,8 @@ config DVB_USB_M920X
 	depends on DVB_USB
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA827X if !DVB_FE_CUSTOMISE
+	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver.
 	  Currently, only devices with a product id of
@@ -241,3 +246,13 @@ config DVB_USB_AF9005_REMOTE
 	  Say Y here to support the default remote control decoding for the
 	  Afatech AF9005 based receiver.
 
+config DVB_USB_ANYSEE
+	tristate "Anysee DVB-T/C USB2.0 support"
+	depends on DVB_USB
+	select DVB_PLL if !DVB_FE_CUSTOMISE
+	select DVB_MT352 if !DVB_FE_CUSTOMISE
+	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
+	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
+	help
+	  Say Y here to support the Anysee E30, Anysee E30 Plus or
+	  Anysee E30 C Plus DVB USB2.0 receiver.
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index c6511a6c0ab..44c11e45e56 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -61,6 +61,9 @@ obj-$(CONFIG_DVB_USB_AF9005) += dvb-usb-af9005.o
 dvb-usb-af9005-remote-objs = af9005-remote.o
 obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o
 
+dvb-usb-anysee-objs = anysee.o
+obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
new file mode 100644
index 00000000000..adfd4fc82ef
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -0,0 +1,553 @@
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
+ * module registers serial interface that can be used to communicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#include "anysee.h"
+#include "tda1002x.h"
+#include "mt352.h"
+#include "mt352_priv.h"
+#include "zl10353.h"
+
+/* debug */
+static int dvb_usb_anysee_debug;
+module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+struct mutex anysee_usb_mutex;
+
+static int anysee_ctrl_msg(struct dvb_usb_device *d, u8 *sbuf, u8 slen,
+	u8 *rbuf, u8 rlen)
+{
+	struct anysee_state *state = d->priv;
+	int act_len, ret;
+	u8 buf[64];
+
+	if (slen > sizeof(buf))
+		slen = sizeof(buf);
+	memcpy(&buf[0], sbuf, slen);
+	buf[60] = state->seq++;
+
+	if (mutex_lock_interruptible(&anysee_usb_mutex) < 0)
+		return -EAGAIN;
+
+	/* We need receive one message more after dvb_usb_generic_rw due
+	   to weird transaction flow, which is 1 x send + 2 x receive. */
+	ret = dvb_usb_generic_rw(d, buf, sizeof(buf), buf, sizeof(buf), 0);
+
+	if (!ret) {
+		/* receive 2nd answer */
+		ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev,
+			d->props.generic_bulk_ctrl_endpoint), buf, sizeof(buf),
+			&act_len, 2000);
+		if (ret)
+			err("%s: recv bulk message failed: %d", __func__, ret);
+		else {
+			deb_xfer("<<< ");
+			debug_dump(buf, act_len, deb_xfer);
+		}
+	}
+
+	/* read request, copy returned data to return buf */
+	if (!ret && rbuf && rlen)
+		memcpy(rbuf, buf, rlen);
+
+	mutex_unlock(&anysee_usb_mutex);
+
+	return ret;
+}
+
+static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
+{
+	u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01};
+	int ret;
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1);
+	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, *val);
+	return ret;
+}
+
+static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val)
+{
+	u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val};
+	deb_info("%s: reg:%04x val:%02x\n", __func__, reg, val);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id)
+{
+	u8 buf[] = {CMD_GET_HW_INFO};
+	return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3);
+}
+
+static int anysee_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00};
+	deb_info("%s: onoff:%02x\n", __func__, onoff);
+	return anysee_ctrl_msg(adap->dev, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval)
+{
+	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval};
+	deb_info("%s: state:%02x interval:%02x\n", __func__, mode, interval);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff)
+{
+	u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff};
+	deb_info("%s: onoff:%02x\n", __func__, onoff);
+	return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+}
+
+static int anysee_init(struct dvb_usb_device *d)
+{
+	int ret;
+	/* LED light */
+	ret = anysee_led_ctrl(d, 0x01, 0x03);
+	if (ret)
+		return ret;
+
+	/* enable IR */
+	ret = anysee_ir_ctrl(d, 1);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/* I2C */
+static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+	int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int ret, inc, i = 0;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	while (i < num) {
+		if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) {
+			u8 buf[6];
+			buf[0] = CMD_I2C_READ;
+			buf[1] = msg[i].addr + 1;
+			buf[2] = msg[i].buf[0];
+			buf[3] = 0x00;
+			buf[4] = 0x00;
+			buf[5] = 0x01;
+			ret = anysee_ctrl_msg(d, buf, sizeof(buf), msg[i+1].buf,
+				msg[i+1].len);
+			inc = 2;
+		} else {
+			u8 buf[4+msg[i].len];
+			buf[0] = CMD_I2C_WRITE;
+			buf[1] = msg[i].addr;
+			buf[2] = msg[i].len;
+			buf[3] = 0x01;
+			memcpy(&buf[4], msg[i].buf, msg[i].len);
+			ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0);
+			inc = 1;
+		}
+		if (ret)
+			return ret;
+
+		i += inc;
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+
+	return i;
+}
+
+static u32 anysee_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm anysee_i2c_algo = {
+	.master_xfer   = anysee_master_xfer,
+	.functionality = anysee_i2c_func,
+};
+
+static int anysee_mt352_demod_init(struct dvb_frontend *fe)
+{
+	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
+	static u8 reset []         = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };
+	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x33 };
+	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
+/* Callbacks for DVB USB */
+static struct tda10023_config anysee_tda10023_config = {
+	.demod_address = 0x1a,
+	.invert = 0,
+	.xtal   = 16000000,
+	.pll_m  = 11,
+	.pll_p  = 3,
+	.pll_n  = 1,
+	.output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C,
+	.deltaf = 0xfeeb,
+};
+
+static struct mt352_config anysee_mt352_config = {
+	.demod_address = 0x1e,
+	.demod_init    = anysee_mt352_demod_init,
+};
+
+static struct zl10353_config anysee_zl10353_config = {
+	.demod_address = 0x1e,
+	.parallel_ts = 1,
+};
+
+static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	struct anysee_state *state = adap->dev->priv;
+	u8 hw_info[3];
+	u8 io_d; /* IO port D */
+
+	/* check which hardware we have
+	   We must do this call two times to get reliable values (hw bug). */
+	ret = anysee_get_hw_info(adap->dev, hw_info);
+	if (ret)
+		return ret;
+	ret = anysee_get_hw_info(adap->dev, hw_info);
+	if (ret)
+		return ret;
+
+	/* Meaning of these info bytes are guessed. */
+	info("firmware version:%d.%d.%d hardware id:%d",
+		0, hw_info[1], hw_info[2], hw_info[0]);
+
+	ret = anysee_read_reg(adap->dev, 0xb0, &io_d); /* IO port D */
+	if (ret)
+		return ret;
+	deb_info("%s: IO port D:%02x\n", __func__, io_d);
+
+	/* Select demod using trial and error method. */
+
+	/* Try to attach demodulator in following order:
+	      model      demod     hw  firmware
+	   1. E30        MT352     02  0.2.1
+	   2. E30        ZL10353   02  0.2.1
+	   3. E30 Plus   ZL10353   06  0.1.0
+	   4. E30C Plus  TDA10023  0a  0.1.0    rev 0.2
+	   4. E30C Plus  TDA10023  0f  0.1.2    rev 0.4
+	*/
+
+	/* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
+	adap->fe = dvb_attach(mt352_attach, &anysee_mt352_config,
+			      &adap->dev->i2c_adap);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_THOMSON_DTT7579;
+		return 0;
+	}
+
+	/* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
+	adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+			      &adap->dev->i2c_adap);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_THOMSON_DTT7579;
+		return 0;
+	}
+
+	/* connect demod on IO port D for TDA10023 & ZL10353 */
+	ret = anysee_write_reg(adap->dev, 0xb0, 0x25);
+	if (ret)
+		return ret;
+
+	/* Zarlink ZL10353 DVB-T demod inside of Samsung DNOS404ZH103A NIM */
+	adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+			      &adap->dev->i2c_adap);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_THOMSON_DTT7579;
+		return 0;
+	}
+
+	/* IO port E - E30C rev 0.4 board requires this */
+	ret = anysee_write_reg(adap->dev, 0xb1, 0xa7);
+	if (ret)
+		return ret;
+
+	/* Philips TDA10023 DVB-C demod */
+	adap->fe = dvb_attach(tda10023_attach, &anysee_tda10023_config,
+			      &adap->dev->i2c_adap, 0x48);
+	if (adap->fe != NULL) {
+		state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
+		return 0;
+	}
+
+	/* return IO port D to init value for safe */
+	ret = anysee_write_reg(adap->dev, 0xb0, io_d);
+	if (ret)
+		return ret;
+
+	err("Unkown Anysee version: %02x %02x %02x. "\
+	    "Please report the <linux-dvb@linuxtv.org>.",
+	    hw_info[0], hw_info[1], hw_info[2]);
+
+	return -ENODEV;
+}
+
+static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct anysee_state *state = adap->dev->priv;
+	deb_info("%s: \n", __func__);
+
+	switch (state->tuner) {
+	case DVB_PLL_THOMSON_DTT7579:
+		/* Thomson dtt7579 (not sure) PLL inside of:
+		   Samsung DNOS404ZH102A NIM
+		   Samsung DNOS404ZH103A NIM */
+		dvb_attach(dvb_pll_attach, adap->fe, 0x61,
+			   NULL, DVB_PLL_THOMSON_DTT7579);
+		break;
+	case DVB_PLL_SAMSUNG_DTOS403IH102A:
+		/* Unknown PLL inside of Samsung DTOS403IH102A tuner module */
+		dvb_attach(dvb_pll_attach, adap->fe, 0xc0,
+			   &adap->dev->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A);
+		break;
+	}
+
+	return 0;
+}
+
+static int anysee_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
+{
+	u8 buf[] = {CMD_GET_IR_CODE};
+	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
+	u8 ircode[2];
+	int i, ret;
+
+	ret = anysee_ctrl_msg(d, buf, sizeof(buf), &ircode[0], 2);
+	if (ret)
+		return ret;
+
+	*event = 0;
+	*state = REMOTE_NO_KEY_PRESSED;
+
+	for (i = 0; i < d->props.rc_key_map_size; i++) {
+		if (keymap[i].custom == ircode[0] &&
+		    keymap[i].data == ircode[1]) {
+			*event = keymap[i].event;
+			*state = REMOTE_KEY_PRESSED;
+			return 0;
+		}
+	}
+	return 0;
+}
+
+static struct dvb_usb_rc_key anysee_rc_keys[] = {
+	{ 0x01, 0x00, KEY_0 },
+	{ 0x01, 0x01, KEY_1 },
+	{ 0x01, 0x02, KEY_2 },
+	{ 0x01, 0x03, KEY_3 },
+	{ 0x01, 0x04, KEY_4 },
+	{ 0x01, 0x05, KEY_5 },
+	{ 0x01, 0x06, KEY_6 },
+	{ 0x01, 0x07, KEY_7 },
+	{ 0x01, 0x08, KEY_8 },
+	{ 0x01, 0x09, KEY_9 },
+	{ 0x01, 0x0a, KEY_POWER },
+	{ 0x01, 0x0b, KEY_DOCUMENTS },    /* * */
+	{ 0x01, 0x19, KEY_FAVORITES },
+	{ 0x01, 0x20, KEY_SLEEP },
+	{ 0x01, 0x21, KEY_MODE },         /* 4:3 / 16:9 select */
+	{ 0x01, 0x22, KEY_ZOOM },
+	{ 0x01, 0x47, KEY_TEXT },
+	{ 0x01, 0x16, KEY_TV },           /* TV / radio select */
+	{ 0x01, 0x1e, KEY_LANGUAGE },     /* Second Audio Program */
+	{ 0x01, 0x1a, KEY_SUBTITLE },
+	{ 0x01, 0x1b, KEY_CAMERA },       /* screenshot */
+	{ 0x01, 0x42, KEY_MUTE },
+	{ 0x01, 0x0e, KEY_MENU },
+	{ 0x01, 0x0f, KEY_EPG },
+	{ 0x01, 0x17, KEY_INFO },
+	{ 0x01, 0x10, KEY_EXIT },
+	{ 0x01, 0x13, KEY_VOLUMEUP },
+	{ 0x01, 0x12, KEY_VOLUMEDOWN },
+	{ 0x01, 0x11, KEY_CHANNELUP },
+	{ 0x01, 0x14, KEY_CHANNELDOWN },
+	{ 0x01, 0x15, KEY_OK },
+	{ 0x01, 0x1d, KEY_RED },
+	{ 0x01, 0x1f, KEY_GREEN },
+	{ 0x01, 0x1c, KEY_YELLOW },
+	{ 0x01, 0x44, KEY_BLUE },
+	{ 0x01, 0x0c, KEY_SHUFFLE },      /* snapshot */
+	{ 0x01, 0x48, KEY_STOP },
+	{ 0x01, 0x50, KEY_PLAY },
+	{ 0x01, 0x51, KEY_PAUSE },
+	{ 0x01, 0x49, KEY_RECORD },
+	{ 0x01, 0x18, KEY_PREVIOUS },     /* |<< */
+	{ 0x01, 0x0d, KEY_NEXT },         /* >>| */
+	{ 0x01, 0x24, KEY_PROG1 },        /* F1 */
+	{ 0x01, 0x25, KEY_PROG2 },        /* F2 */
+};
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties anysee_properties;
+
+static int anysee_probe(struct usb_interface *intf,
+			const struct usb_device_id *id)
+{
+	struct dvb_usb_device *d;
+	struct usb_host_interface *alt;
+	int ret;
+
+	mutex_init(&anysee_usb_mutex);
+
+	/* There is one interface with two alternate settings.
+	   Alternate setting 0 is for bulk transfer.
+	   Alternate setting 1 is for isochronous transfer.
+	   We use bulk transfer (alternate setting 0). */
+	if (intf->num_altsetting < 1)
+		return -ENODEV;
+
+	ret = dvb_usb_device_init(intf, &anysee_properties, THIS_MODULE, &d,
+		adapter_nr);
+	if (ret)
+		return ret;
+
+	alt = usb_altnum_to_altsetting(intf, 0);
+	if (alt == NULL) {
+		deb_info("%s: no alt found!\n", __func__);
+		return -ENODEV;
+	}
+
+	ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
+		alt->desc.bAlternateSetting);
+	if (ret)
+		return ret;
+
+	if (d)
+		ret = anysee_init(d);
+
+	return ret;
+}
+
+static struct usb_device_id anysee_table [] = {
+	{ USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
+	{ USB_DEVICE(USB_VID_AMT,     USB_PID_ANYSEE) },
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, anysee_table);
+
+static struct dvb_usb_device_properties anysee_properties = {
+	.caps             = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl         = DEVICE_SPECIFIC,
+
+	.size_of_priv     = sizeof(struct anysee_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = anysee_streaming_ctrl,
+			.frontend_attach  = anysee_frontend_attach,
+			.tuner_attach     = anysee_tuner_attach,
+			.stream = {
+				.type = USB_BULK,
+				.count = 8,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = 512,
+					}
+				}
+			},
+		}
+	},
+
+	.rc_key_map       = anysee_rc_keys,
+	.rc_key_map_size  = ARRAY_SIZE(anysee_rc_keys),
+	.rc_query         = anysee_rc_query,
+	.rc_interval      = 200,  /* windows driver uses 500ms */
+
+	.i2c_algo         = &anysee_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 1,
+
+	.num_device_descs = 1,
+	.devices = {
+		{
+			.name = "Anysee DVB USB2.0",
+			.cold_ids = {NULL},
+			.warm_ids = {&anysee_table[0],
+				     &anysee_table[1], NULL},
+		},
+	}
+};
+
+static struct usb_driver anysee_driver = {
+	.name       = "dvb_usb_anysee",
+	.probe      = anysee_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table   = anysee_table,
+};
+
+/* module stuff */
+static int __init anysee_module_init(void)
+{
+	int ret;
+
+	ret = usb_register(&anysee_driver);
+	if (ret)
+		err("%s: usb_register failed. Error number %d", __func__, ret);
+
+	return ret;
+}
+
+static void __exit anysee_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&anysee_driver);
+}
+
+module_init(anysee_module_init);
+module_exit(anysee_module_exit);
+
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/anysee.h b/drivers/media/dvb/dvb-usb/anysee.h
new file mode 100644
index 00000000000..7ca01ff6e13
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/anysee.h
@@ -0,0 +1,304 @@
+/*
+ * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver
+ *
+ * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO:
+ * - add smart card reader support for Conditional Access (CA)
+ *
+ * Card reader in Anysee is nothing more than ISO 7816 card reader.
+ * There is no hardware CAM in any Anysee device sold.
+ * In my understanding it should be implemented by making own module
+ * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This
+ * module registers serial interface that can be used to communicate
+ * with any ISO 7816 smart card.
+ *
+ * Any help according to implement serial smart card reader support
+ * is highly welcome!
+ */
+
+#ifndef _DVB_USB_ANYSEE_H_
+#define _DVB_USB_ANYSEE_H_
+
+#define DVB_USB_LOG_PREFIX "anysee"
+#include "dvb-usb.h"
+
+#define deb_info(args...) dprintk(dvb_usb_anysee_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_anysee_debug, 0x02, args)
+#define deb_rc(args...)   dprintk(dvb_usb_anysee_debug, 0x04, args)
+#define deb_reg(args...)  dprintk(dvb_usb_anysee_debug, 0x08, args)
+#define deb_i2c(args...)  dprintk(dvb_usb_anysee_debug, 0x10, args)
+#define deb_fw(args...)   dprintk(dvb_usb_anysee_debug, 0x20, args)
+
+enum cmd {
+	CMD_I2C_READ            = 0x33,
+	CMD_I2C_WRITE           = 0x31,
+	CMD_REG_READ            = 0xb0,
+	CMD_REG_WRITE           = 0xb1,
+	CMD_STREAMING_CTRL      = 0x12,
+	CMD_LED_AND_IR_CTRL     = 0x16,
+	CMD_GET_IR_CODE         = 0x41,
+	CMD_GET_HW_INFO         = 0x19,
+	CMD_SMARTCARD           = 0x34,
+};
+
+struct anysee_state {
+	u8 tuner;
+	u8 seq;
+};
+
+#endif
+
+/***************************************************************************
+ * USB API description (reverse engineered)
+ ***************************************************************************
+
+Transaction flow:
+=================
+BULK[00001] >>> REQUEST PACKET 64 bytes
+BULK[00081] <<< REPLY PACKET #1 64 bytes (PREVIOUS TRANSACTION REPLY)
+BULK[00081] <<< REPLY PACKET #2 64 bytes (CURRENT TRANSACTION REPLY)
+
+General reply packet(s) are always used if not own reply defined.
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #1 (PREVIOUS REPLY)
+============================================================================
+|    00 | reply data (if any) from previous transaction
+|       | Just same reply packet as returned during previous transaction.
+|       | Needed only if reply is missed in previous transaction.
+|       | Just skip normally.
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GENERAL REPLY PACKET #2 (CURRENT REPLY)
+============================================================================
+|    00 | reply data (if any)
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C WRITE REQUEST PACKET
+============================================================================
+|    00 | 0x31 I2C write command
+----------------------------------------------------------------------------
+|    01 | i2c address
+----------------------------------------------------------------------------
+|    02 | data length
+|       | 0x02 (for typical I2C reg / val pair)
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+| 04-   | data
+----------------------------------------------------------------------------
+|   -59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | I2C READ REQUEST PACKET
+============================================================================
+|    00 | 0x33 I2C read command
+----------------------------------------------------------------------------
+|    01 | i2c address + 1
+----------------------------------------------------------------------------
+|    02 | register
+----------------------------------------------------------------------------
+|    03 | 0x00
+----------------------------------------------------------------------------
+|    04 | 0x00
+----------------------------------------------------------------------------
+|    05 | 0x01
+----------------------------------------------------------------------------
+| 06-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER WRITE REQUEST PACKET
+============================================================================
+|    00 | 0xb1 register write command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+|    04 | value
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | USB CONTROLLER REGISTER READ REQUEST PACKET
+============================================================================
+|    00 | 0xb0 register read command
+----------------------------------------------------------------------------
+| 01-02 | register
+----------------------------------------------------------------------------
+|    03 | 0x01
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | LED CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+|    01 | 0x01 (LED)
+----------------------------------------------------------------------------
+|    03 | 0x00 blink
+|       | 0x01 lights continuously
+----------------------------------------------------------------------------
+|    04 | blink interval
+|       | 0x00 fastest (looks like LED lights continuously)
+|       | 0xff slowest
+----------------------------------------------------------------------------
+| 05-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | IR CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x16 LED and IR control command
+----------------------------------------------------------------------------
+|    01 | 0x02 (IR)
+----------------------------------------------------------------------------
+|    03 | 0x00 IR disabled
+|       | 0x01 IR enabled
+----------------------------------------------------------------------------
+| 04-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | STREAMING CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x12 streaming control command
+----------------------------------------------------------------------------
+|    01 | 0x00 streaming disabled
+|       | 0x01 streaming enabled
+----------------------------------------------------------------------------
+|    02 | 0x00
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REQUEST PACKET
+============================================================================
+|    00 | 0x41 remote control command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | REMOTE CONTROL REPLY PACKET
+============================================================================
+|    00 | 0x00 code not received
+|       | 0x01 code received
+----------------------------------------------------------------------------
+|    01 | remote control code
+----------------------------------------------------------------------------
+| 02-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REQUEST PACKET
+============================================================================
+|    00 | 0x19 get hardware info command
+----------------------------------------------------------------------------
+| 01-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | GET HARDWARE INFO REPLY PACKET
+============================================================================
+|    00 | hardware id
+----------------------------------------------------------------------------
+| 01-02 | firmware version
+----------------------------------------------------------------------------
+| 03-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+============================================================================
+| 00-63 | SMART CARD READER PACKET
+============================================================================
+|    00 | 0x34 smart card reader command
+----------------------------------------------------------------------------
+|    xx |
+----------------------------------------------------------------------------
+| xx-59 | don't care
+----------------------------------------------------------------------------
+|    60 | packet sequence number
+----------------------------------------------------------------------------
+| 61-63 | don't care
+----------------------------------------------------------------------------
+
+*/
diff --git a/drivers/media/dvb/dvb-usb/au6610.c b/drivers/media/dvb/dvb-usb/au6610.c
index 2ccb90fa60c..eb34cc3894e 100644
--- a/drivers/media/dvb/dvb-usb/au6610.c
+++ b/drivers/media/dvb/dvb-usb/au6610.c
@@ -1,24 +1,31 @@
-/* DVB USB compliant linux driver for Sigmatek DVB-110 DVB-T USB2.0 receiver
+/*
+ * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0.
  *
  * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
  *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
  *
- * see Documentation/dvb/README.dvb-usb for more information
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 #include "au6610.h"
-
 #include "zl10353.h"
 #include "qt1010.h"
 
 /* debug */
 static int dvb_usb_au6610_debug;
 module_param_named(debug, dvb_usb_au6610_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
-
+MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr,
@@ -42,9 +49,8 @@ static int au6610_usb_msg(struct dvb_usb_device *d, u8 operation, u8 addr,
 	}
 
 	ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), operation,
-			      USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index, usb_buf,
-			      sizeof(usb_buf), AU6610_USB_TIMEOUT);
-
+			      USB_TYPE_VENDOR|USB_DIR_IN, addr << 1, index,
+			      usb_buf, sizeof(usb_buf), AU6610_USB_TIMEOUT);
 	if (ret < 0)
 		return ret;
 
@@ -116,15 +122,6 @@ static struct i2c_algorithm au6610_i2c_algo = {
 };
 
 /* Callbacks for DVB USB */
-static int au6610_identify_state(struct usb_device *udev,
-				 struct dvb_usb_device_properties *props,
-				 struct dvb_usb_device_description **desc,
-				 int *cold)
-{
-	*cold = 0;
-	return 0;
-}
-
 static struct zl10353_config au6610_zl10353_config = {
 	.demod_address = 0x0f,
 	.no_tuner = 1,
@@ -133,12 +130,12 @@ static struct zl10353_config au6610_zl10353_config = {
 
 static int au6610_zl10353_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	if ((adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config,
-				   &adap->dev->i2c_adap)) != NULL) {
-		return 0;
-	}
+	adap->fe = dvb_attach(zl10353_attach, &au6610_zl10353_config,
+		&adap->dev->i2c_adap);
+	if (adap->fe == NULL)
+		return -ENODEV;
 
-	return -EIO;
+	return 0;
 }
 
 static struct qt1010_config au6610_qt1010_config = {
@@ -171,7 +168,7 @@ static int au6610_probe(struct usb_interface *intf,
 		alt = usb_altnum_to_altsetting(intf, AU6610_ALTSETTING);
 
 		if (alt == NULL) {
-			deb_rc("no alt found!\n");
+			deb_info("%s: no alt found!\n", __func__);
 			return -ENODEV;
 		}
 		ret = usb_set_interface(d->udev, alt->desc.bInterfaceNumber,
@@ -181,18 +178,19 @@ static int au6610_probe(struct usb_interface *intf,
 	return ret;
 }
 
-
 static struct usb_device_id au6610_table [] = {
 	{ USB_DEVICE(USB_VID_ALCOR_MICRO, USB_PID_SIGMATEK_DVB_110) },
 	{ }		/* Terminating entry */
 };
-MODULE_DEVICE_TABLE (usb, au6610_table);
+MODULE_DEVICE_TABLE(usb, au6610_table);
 
 static struct dvb_usb_device_properties au6610_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
 	.usb_ctrl = DEVICE_SPECIFIC,
-	.size_of_priv     = 0,
-	.identify_state   = au6610_identify_state,
+
+	.size_of_priv = 0,
+
 	.num_adapters = 1,
 	.adapter = {
 		{
@@ -206,20 +204,22 @@ static struct dvb_usb_device_properties au6610_properties = {
 				.u = {
 					.isoc = {
 						.framesperurb = 40,
-						.framesize = 942,   /* maximum packet size */
-						.interval = 1.25,   /* 125 us */
+						.framesize = 942,
+						.interval = 1,
 					}
 				}
 			},
 		}
 	},
+
 	.i2c_algo = &au6610_i2c_algo,
+
 	.num_device_descs = 1,
 	.devices = {
 		{
-			"Sigmatek DVB-110 DVB-T USB2.0",
-			{ &au6610_table[0], NULL },
-			{ NULL },
+			.name = "Sigmatek DVB-110 DVB-T USB2.0",
+			.cold_ids = {NULL},
+			.warm_ids = {&au6610_table[0], NULL},
 		},
 	}
 };
@@ -236,12 +236,11 @@ static int __init au6610_module_init(void)
 {
 	int ret;
 
-	if ((ret = usb_register(&au6610_driver))) {
+	ret = usb_register(&au6610_driver);
+	if (ret)
 		err("usb_register failed. Error number %d", ret);
-		return ret;
-	}
 
-	return 0;
+	return ret;
 }
 
 static void __exit au6610_module_exit(void)
@@ -250,10 +249,10 @@ static void __exit au6610_module_exit(void)
 	usb_deregister(&au6610_driver);
 }
 
-module_init (au6610_module_init);
-module_exit (au6610_module_exit);
+module_init(au6610_module_init);
+module_exit(au6610_module_exit);
 
 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
-MODULE_DESCRIPTION("Driver Sigmatek DVB-110 DVB-T USB2.0 / AU6610");
+MODULE_DESCRIPTION("Driver for Alcor Micro AU6610 DVB-T USB2.0");
 MODULE_VERSION("0.1");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/au6610.h b/drivers/media/dvb/dvb-usb/au6610.h
index 4161b054c71..7849abe2c61 100644
--- a/drivers/media/dvb/dvb-usb/au6610.h
+++ b/drivers/media/dvb/dvb-usb/au6610.h
@@ -1,10 +1,30 @@
+/*
+ * DVB USB Linux driver for Alcor Micro AU6610 DVB-T USB2.0.
+ *
+ * Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
 #ifndef _DVB_USB_AU6610_H_
 #define _DVB_USB_AU6610_H_
 
 #define DVB_USB_LOG_PREFIX "au6610"
 #include "dvb-usb.h"
 
-#define deb_rc(args...)   dprintk(dvb_usb_au6610_debug,0x01,args)
+#define deb_info(args...)   dprintk(dvb_usb_au6610_debug, 0x01, args)
 
 #define AU6610_REQ_I2C_WRITE	0x14
 #define AU6610_REQ_I2C_READ	0x13
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 0286156704f..578afce6884 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -35,6 +35,7 @@
 #include "zl10353.h"
 #include "tuner-xc2028.h"
 #include "tuner-simple.h"
+#include "mxl5005s.h"
 
 /* debug */
 static int dvb_usb_cxusb_debug;
@@ -43,9 +44,8 @@ MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_ST
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
-#define deb_info(args...)   dprintk(dvb_usb_cxusb_debug,0x01,args)
-#define deb_i2c(args...)    if (d->udev->descriptor.idVendor == USB_VID_MEDION) \
-				dprintk(dvb_usb_cxusb_debug,0x01,args)
+#define deb_info(args...)   dprintk(dvb_usb_cxusb_debug, 0x03, args)
+#define deb_i2c(args...)    dprintk(dvb_usb_cxusb_debug, 0x02, args)
 
 static int cxusb_ctrl_msg(struct dvb_usb_device *d,
 			  u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
@@ -202,6 +202,46 @@ static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff)
 		return cxusb_ctrl_msg(d, CMD_POWER_OFF, &b, 1, NULL, 0);
 }
 
+static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	int ret;
+	if (!onoff)
+		return cxusb_ctrl_msg(d, CMD_POWER_OFF, NULL, 0, NULL, 0);
+	if (d->state == DVB_USB_STATE_INIT &&
+	    usb_set_interface(d->udev, 0, 0) < 0)
+		err("set interface failed");
+	do; while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
+		   !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) &&
+		   !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0);
+	if (!ret) {
+		/* FIXME: We don't know why, but we need to configure the
+		 * lgdt3303 with the register settings below on resume */
+		int i;
+		u8 buf, bufs[] = {
+			0x0e, 0x2, 0x00, 0x7f,
+			0x0e, 0x2, 0x02, 0xfe,
+			0x0e, 0x2, 0x02, 0x01,
+			0x0e, 0x2, 0x00, 0x03,
+			0x0e, 0x2, 0x0d, 0x40,
+			0x0e, 0x2, 0x0e, 0x87,
+			0x0e, 0x2, 0x0f, 0x8e,
+			0x0e, 0x2, 0x10, 0x01,
+			0x0e, 0x2, 0x14, 0xd7,
+			0x0e, 0x2, 0x47, 0x88,
+		};
+		msleep(20);
+		for (i = 0; i < sizeof(bufs)/sizeof(u8); i += 4/sizeof(u8)) {
+			ret = cxusb_ctrl_msg(d, CMD_I2C_WRITE,
+					     bufs+i, 4, &buf, 1);
+			if (ret)
+				break;
+			if (buf != 0x8)
+				return -EREMOTEIO;
+		}
+	}
+	return ret;
+}
+
 static int cxusb_bluebird_power_ctrl(struct dvb_usb_device *d, int onoff)
 {
 	u8 b = 0;
@@ -233,6 +273,16 @@ static int cxusb_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 	return 0;
 }
 
+static int cxusb_aver_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	if (onoff)
+		cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_ON, NULL, 0, NULL, 0);
+	else
+		cxusb_ctrl_msg(adap->dev, CMD_AVER_STREAM_OFF,
+			       NULL, 0, NULL, 0);
+	return 0;
+}
+
 static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
 	struct dvb_usb_rc_key *keymap = d->props.rc_key_map;
@@ -423,6 +473,12 @@ static struct lgdt330x_config cxusb_lgdt3303_config = {
 	.demod_chip    = LGDT3303,
 };
 
+static struct lgdt330x_config cxusb_aver_lgdt3303_config = {
+	.demod_address       = 0x0e,
+	.demod_chip          = LGDT3303,
+	.clock_polarity_flip = 2,
+};
+
 static struct mt352_config cxusb_dee1601_config = {
 	.demod_address = 0x0f,
 	.demod_init    = cxusb_dee1601_demod_init,
@@ -453,6 +509,24 @@ static struct mt352_config cxusb_mt352_xc3028_config = {
 	.demod_init = cxusb_mt352_demod_init,
 };
 
+/* FIXME: needs tweaking */
+static struct mxl5005s_config aver_a868r_tuner = {
+	.i2c_address     = 0x63,
+	.if_freq         = 6000000UL,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_C,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
+};
+
 /* Callbacks for DVB USB */
 static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
 {
@@ -533,6 +607,13 @@ static int cxusb_dvico_xc3028_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
+static int cxusb_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	dvb_attach(mxl5005s_attach, adap->fe,
+		   &adap->dev->i2c_adap, &aver_a868r_tuner);
+	return 0;
+}
+
 static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	u8 b;
@@ -562,6 +643,16 @@ static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap)
 	return -EIO;
 }
 
+static int cxusb_aver_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	adap->fe = dvb_attach(lgdt330x_attach, &cxusb_aver_lgdt3303_config,
+			      &adap->dev->i2c_adap);
+	if (adap->fe != NULL)
+		return 0;
+
+	return -EIO;
+}
+
 static int cxusb_mt352_frontend_attach(struct dvb_usb_adapter *adap)
 {
 	/* used in both lgz201 and th7579 */
@@ -736,6 +827,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties;
+static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
 
 static int cxusb_probe(struct usb_interface *intf,
 		       const struct usb_device_id *id)
@@ -756,7 +848,10 @@ static int cxusb_probe(struct usb_interface *intf,
 				     THIS_MODULE, NULL, adapter_nr) ||
 	    0 == dvb_usb_device_init(intf,
 				&cxusb_bluebird_nano2_needsfirmware_properties,
-				     THIS_MODULE, NULL, adapter_nr))
+				     THIS_MODULE, NULL, adapter_nr) ||
+	    0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties,
+				     THIS_MODULE, NULL, adapter_nr) ||
+	    0)
 		return 0;
 
 	return -EINVAL;
@@ -779,6 +874,7 @@ static struct usb_device_id cxusb_table [] = {
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4) },
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2) },
 	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM) },
+	{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) },
 	{}		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, cxusb_table);
@@ -1182,6 +1278,48 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_prope
 	}
 };
 
+static struct dvb_usb_device_properties cxusb_aver_a868r_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl         = CYPRESS_FX2,
+
+	.size_of_priv     = sizeof(struct cxusb_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = cxusb_aver_streaming_ctrl,
+			.frontend_attach  = cxusb_aver_lgdt3303_frontend_attach,
+			.tuner_attach     = cxusb_mxl5003s_tuner_attach,
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_BULK,
+				.count = 5,
+				.endpoint = 0x04,
+				.u = {
+					.bulk = {
+						.buffersize = 8192,
+					}
+				}
+			},
+
+		},
+	},
+	.power_ctrl       = cxusb_aver_power_ctrl,
+
+	.i2c_algo         = &cxusb_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.num_device_descs = 1,
+	.devices = {
+		{   "AVerMedia AVerTVHD Volar (A868R)",
+			{ NULL },
+			{ &cxusb_table[16], NULL },
+		},
+	}
+};
+
 static struct usb_driver cxusb_driver = {
 	.name		= "dvb_usb_cxusb",
 	.probe		= cxusb_probe,
diff --git a/drivers/media/dvb/dvb-usb/cxusb.h b/drivers/media/dvb/dvb-usb/cxusb.h
index 4768a2c3551..1a51eafd31b 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.h
+++ b/drivers/media/dvb/dvb-usb/cxusb.h
@@ -20,6 +20,9 @@
 #define CMD_STREAMING_ON  0x36
 #define CMD_STREAMING_OFF 0x37
 
+#define CMD_AVER_STREAM_ON  0x18
+#define CMD_AVER_STREAM_OFF 0x19
+
 #define CMD_GET_IR_CODE   0x47
 
 #define CMD_ANALOG        0x50
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index c4d40fe01d5..3dd20bfbed3 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1117,6 +1117,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS) },
 	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1372,7 +1373,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			}
 		},
 
-		.num_device_descs = 2,
+		.num_device_descs = 3,
 		.devices = {
 			{   "DiBcom STK7070PD reference design",
 				{ &dib0700_usb_id_table[17], NULL },
@@ -1381,6 +1382,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{   "Pinnacle PCTV Dual DVB-T Diversity Stick",
 				{ &dib0700_usb_id_table[18], NULL },
 				{ NULL },
+			},
+			{   "Hauppauge Nova-TD Stick (52009)",
+				{ &dib0700_usb_id_table[35], NULL },
+				{ NULL },
 			}
 		}
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
index 23428cd3075..326f7608954 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c
@@ -20,11 +20,7 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d)
 	}
 
 	strncpy(d->i2c_adap.name, d->desc->name, sizeof(d->i2c_adap.name));
-#ifdef I2C_ADAP_CLASS_TV_DIGITAL
-	d->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL,
-#else
 	d->i2c_adap.class = I2C_CLASS_TV_DIGITAL,
-#endif
 	d->i2c_adap.algo      = d->props.i2c_algo;
 	d->i2c_adap.algo_data = NULL;
 	d->i2c_adap.dev.parent = &d->udev->dev;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 34245d1b7dd..e5238b31e94 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -14,6 +14,7 @@
 #define USB_VID_AFATECH				0x15a4
 #define USB_VID_ALCOR_MICRO			0x058f
 #define USB_VID_ALINK				0x05e3
+#define USB_VID_AMT				0x1c73
 #define USB_VID_ANCHOR				0x0547
 #define USB_VID_ANSONIC				0x10b9
 #define USB_VID_ANUBIS_ELECTRONIC		0x10fd
@@ -57,6 +58,7 @@
 #define USB_PID_AFATECH_AF9005				0x9020
 #define USB_VID_ALINK_DTU				0xf170
 #define USB_PID_ANSONIC_DVBT_USB			0x6000
+#define USB_PID_ANYSEE					0x861f
 #define USB_PID_AVERMEDIA_DVBT_USB_COLD			0x0001
 #define USB_PID_AVERMEDIA_DVBT_USB_WARM			0x0002
 #define USB_PID_AVERMEDIA_DVBT_USB2_COLD		0xa800
@@ -132,9 +134,15 @@
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_3		0x7070
 #define USB_PID_HAUPPAUGE_MYTV_T			0x7080
 #define USB_PID_HAUPPAUGE_NOVA_TD_STICK			0x9580
+#define USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009		0x5200
 #define USB_PID_AVERMEDIA_EXPRESS			0xb568
 #define USB_PID_AVERMEDIA_VOLAR				0xa807
 #define USB_PID_AVERMEDIA_VOLAR_2			0xb808
+#define USB_PID_AVERMEDIA_VOLAR_A868R			0xa868
+#define USB_PID_AVERMEDIA_MCE_USB_M038			0x1228
+#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R	0x0039
+#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_ATSC	0x1039
+#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT	0x2039
 #define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
 #define USB_PID_TERRATEC_CINERGY_HT_USB_XE		0x0058
diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c
index 037f7ffb47b..6f596ed4176 100644
--- a/drivers/media/dvb/dvb-usb/gl861.c
+++ b/drivers/media/dvb/dvb-usb/gl861.c
@@ -1,8 +1,8 @@
 /* DVB USB compliant linux driver for GL861 USB2.0 devices.
  *
  *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
+ *	under the terms of the GNU General Public License as published by the
+ *	Free Software Foundation, version 2.
  *
  * see Documentation/dvb/README.dvb-usb for more information
  */
@@ -13,9 +13,9 @@
 
 /* debug */
 static int dvb_usb_gl861_debug;
-module_param_named(debug,dvb_usb_gl861_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
-
+module_param_named(debug, dvb_usb_gl861_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))."
+	DVB_USB_DEBUG_STATUS);
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
@@ -70,7 +70,7 @@ static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
 		/* write/read request */
 		if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
 			if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
-					  msg[i].len, msg[i+1].buf, msg[i+1].len) < 0)
+				msg[i].len, msg[i+1].buf, msg[i+1].len) < 0)
 				break;
 			i++;
 		} else
@@ -102,12 +102,13 @@ static struct zl10353_config gl861_zl10353_config = {
 
 static int gl861_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	if ((adap->fe = dvb_attach(zl10353_attach, &gl861_zl10353_config,
-				   &adap->dev->i2c_adap)) != NULL) {
-		return 0;
-	}
 
-	return -EIO;
+	adap->fe = dvb_attach(zl10353_attach, &gl861_zl10353_config,
+		&adap->dev->i2c_adap);
+	if (adap->fe == NULL)
+		return -EIO;
+
+	return 0;
 }
 
 static struct qt1010_config gl861_qt1010_config = {
@@ -156,7 +157,7 @@ static struct usb_device_id gl861_table [] = {
 		{ USB_DEVICE(USB_VID_ALINK, USB_VID_ALINK_DTU) },
 		{ }		/* Terminating entry */
 };
-MODULE_DEVICE_TABLE (usb, gl861_table);
+MODULE_DEVICE_TABLE(usb, gl861_table);
 
 static struct dvb_usb_device_properties gl861_properties = {
 	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
@@ -180,7 +181,7 @@ static struct dvb_usb_device_properties gl861_properties = {
 				}
 			}
 		},
-	}},
+	} },
 	.i2c_algo         = &gl861_i2c_algo,
 
 	.num_device_descs = 2,
@@ -210,12 +211,11 @@ static int __init gl861_module_init(void)
 {
 	int ret;
 
-	if ((ret = usb_register(&gl861_driver))) {
+	ret = usb_register(&gl861_driver);
+	if (ret)
 		err("usb_register failed. Error number %d", ret);
-		return ret;
-	}
 
-	return 0;
+	return ret;
 }
 
 static void __exit gl861_module_exit(void)
@@ -224,8 +224,8 @@ static void __exit gl861_module_exit(void)
 	usb_deregister(&gl861_driver);
 }
 
-module_init (gl861_module_init);
-module_exit (gl861_module_exit);
+module_init(gl861_module_init);
+module_exit(gl861_module_exit);
 
 MODULE_AUTHOR("Carl Lundqvist <comabug@gmail.com>");
 MODULE_DESCRIPTION("Driver MSI Mega Sky 580 DVB-T USB2.0 / GL861");
diff --git a/drivers/media/dvb/dvb-usb/gl861.h b/drivers/media/dvb/dvb-usb/gl861.h
index 72a51afd5ee..c54855e2c23 100644
--- a/drivers/media/dvb/dvb-usb/gl861.h
+++ b/drivers/media/dvb/dvb-usb/gl861.h
@@ -4,7 +4,7 @@
 #define DVB_USB_LOG_PREFIX "gl861"
 #include "dvb-usb.h"
 
-#define deb_rc(args...)   dprintk(dvb_usb_gl861_debug,0x01,args)
+#define deb_rc(args...)   dprintk(dvb_usb_gl861_debug, 0x01, args)
 
 #define GL861_WRITE		0x40
 #define GL861_READ		0xc0