Merge branch 'origin' into for-linus

Conflicts:
	MAINTAINERS

11 files changed, 1670 insertions, 31 deletions

diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 8b8bc04ee98..9744b069241 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -71,10 +71,11 @@ config DVB_USB_DIB0700
 	depends on DVB_USB
 	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
 	select DVB_DIB7000M if !DVB_FE_CUSTOMISE
+	select DVB_DIB8000 if !DVB_FE_CUSTOMISE
 	select DVB_DIB3000MC if !DVB_FE_CUSTOMISE
 	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
-	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+	select DVB_TUNER_DIB0070
 	select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
@@ -87,7 +88,7 @@ config DVB_USB_DIB0700
 	  Avermedia and other big and small companies.
 
 	  For an up-to-date list of devices supported by this driver, have a look
-	  on the Linux-DVB Wiki at www.linuxtv.org.
+	  on the LinuxTV Wiki at www.linuxtv.org.
 
 	  Say Y if you own such a device and want to use it. You should build it as
 	  a module.
@@ -315,3 +316,9 @@ config DVB_USB_CE6230
 	select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
 	help
 	  Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver
+
+config DVB_USB_FRIIO
+	tristate "Friio ISDB-T USB2.0 Receiver support"
+	depends on DVB_USB
+	help
+	  Say Y here to support the Japanese DTV receiver Friio.
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index f92734ed777..85b83a43d55 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -79,6 +79,9 @@ obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o
 dvb-usb-ce6230-objs = ce6230.o
 obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o
 
+dvb-usb-friio-objs = friio.o friio-fe.o
+obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 99cdd0d101c..cf042b309b4 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -61,10 +61,13 @@ static struct af9013_config af9015_af9013_config[] = {
 
 static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 {
+#define BUF_LEN 63
+#define REQ_HDR_LEN 8 /* send header size */
+#define ACK_HDR_LEN 2 /* rece header size */
 	int act_len, ret;
-	u8 buf[64];
+	u8 buf[BUF_LEN];
 	u8 write = 1;
-	u8 msg_len = 8;
+	u8 msg_len = REQ_HDR_LEN;
 	static u8 seq; /* packet sequence number */
 
 	if (mutex_lock_interruptible(&af9015_usb_mutex) < 0)
@@ -94,7 +97,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 		break;
 	case WRITE_MEMORY:
 		if (((req->addr & 0xff00) == 0xff00) ||
-		    ((req->addr & 0xae00) == 0xae00))
+		    ((req->addr & 0xff00) == 0xae00))
 			buf[0] = WRITE_VIRTUAL_MEMORY;
 	case WRITE_VIRTUAL_MEMORY:
 	case COPY_FIRMWARE:
@@ -107,17 +110,26 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 		goto error_unlock;
 	}
 
+	/* buffer overflow check */
+	if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) ||
+		(!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
+		err("too much data; cmd:%d len:%d", req->cmd, req->data_len);
+		ret = -EINVAL;
+		goto error_unlock;
+	}
+
 	/* write requested */
 	if (write) {
-		memcpy(&buf[8], req->data, req->data_len);
+		memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len);
 		msg_len += req->data_len;
 	}
+
 	deb_xfer(">>> ");
 	debug_dump(buf, msg_len, deb_xfer);
 
 	/* send req */
 	ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len,
-	&act_len, AF9015_USB_TIMEOUT);
+		&act_len, AF9015_USB_TIMEOUT);
 	if (ret)
 		err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len);
 	else
@@ -130,10 +142,14 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 	if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
 		goto exit_unlock;
 
-	/* receive ack and data if read req */
-	msg_len = 1 + 1 + req->data_len;  /* seq + status + data len */
+	/* write receives seq + status = 2 bytes
+	   read receives seq + status + data = 2 + N bytes */
+	msg_len = ACK_HDR_LEN;
+	if (!write)
+		msg_len += req->data_len;
+
 	ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len,
-			   &act_len, AF9015_USB_TIMEOUT);
+		&act_len, AF9015_USB_TIMEOUT);
 	if (ret) {
 		err("recv bulk message failed:%d", ret);
 		ret = -1;
@@ -159,7 +175,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
 
 	/* read request, copy returned data to return buf */
 	if (!write)
-		memcpy(req->data, &buf[2], req->data_len);
+		memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len);
 
 error_unlock:
 exit_unlock:
@@ -369,12 +385,14 @@ static int af9015_init_endpoint(struct dvb_usb_device *d)
 	u8  packet_size;
 	deb_info("%s: USB speed:%d\n", __func__, d->udev->speed);
 
+	/* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0.
+	   We use smaller - about 1/4 from the original, 5 and 87. */
 #define TS_PACKET_SIZE            188
 
-#define TS_USB20_PACKET_COUNT     348
+#define TS_USB20_PACKET_COUNT      87
 #define TS_USB20_FRAME_SIZE       (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT)
 
-#define TS_USB11_PACKET_COUNT      21
+#define TS_USB11_PACKET_COUNT       5
 #define TS_USB11_FRAME_SIZE       (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT)
 
 #define TS_USB20_MAX_PACKET_SIZE  512
@@ -868,13 +886,13 @@ static int af9015_read_config(struct usb_device *udev)
 		/* USB1.1 set smaller buffersize and disable 2nd adapter */
 		if (udev->speed == USB_SPEED_FULL) {
 			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
-				= TS_USB11_MAX_PACKET_SIZE;
+				= TS_USB11_FRAME_SIZE;
 			/* disable 2nd adapter because we don't have
 			   PID-filters */
 			af9015_config.dual_mode = 0;
 		} else {
 			af9015_properties[i].adapter[0].stream.u.bulk.buffersize
-				= TS_USB20_MAX_PACKET_SIZE;
+				= TS_USB20_FRAME_SIZE;
 		}
 	}
 
@@ -1310,7 +1328,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
@@ -1416,7 +1434,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
@@ -1522,7 +1540,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 					.u = {
 						.bulk = {
 							.buffersize =
-						TS_USB20_MAX_PACKET_SIZE,
+						TS_USB20_FRAME_SIZE,
 						}
 					}
 				},
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 7381aff4dcf..2ae7f648eff 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -203,11 +203,11 @@ static struct i2c_algorithm anysee_i2c_algo = {
 
 static int anysee_mt352_demod_init(struct dvb_frontend *fe)
 {
-	static u8 clock_config []  = { CLOCK_CTL,  0x38, 0x28 };
-	static u8 reset []         = { RESET,      0x80 };
-	static u8 adc_ctl_1_cfg [] = { ADC_CTL_1,  0x40 };
-	static u8 agc_cfg []       = { AGC_TARGET, 0x28, 0x20 };
-	static u8 gpp_ctl_cfg []   = { GPP_CTL,    0x33 };
+	static u8 clock_config[]   = { CLOCK_CTL,  0x38, 0x28 };
+	static u8 reset[]          = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg[]  = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg[]        = { AGC_TARGET, 0x28, 0x20 };
+	static u8 gpp_ctl_cfg[]    = { GPP_CTL,    0x33 };
 	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
 
 	mt352_write(fe, clock_config,   sizeof(clock_config));
@@ -485,7 +485,7 @@ static int anysee_probe(struct usb_interface *intf,
 	return ret;
 }
 
-static struct usb_device_id anysee_table [] = {
+static struct usb_device_id anysee_table[] = {
 	{ USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) },
 	{ USB_DEVICE(USB_VID_AMT,     USB_PID_ANYSEE) },
 	{ }		/* Terminating entry */
@@ -511,7 +511,7 @@ static struct dvb_usb_device_properties anysee_properties = {
 				.endpoint = 0x82,
 				.u = {
 					.bulk = {
-						.buffersize = 512,
+						.buffersize = (16*512),
 					}
 				}
 			},
diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c
index 52badc00e67..0737c637789 100644
--- a/drivers/media/dvb/dvb-usb/ce6230.c
+++ b/drivers/media/dvb/dvb-usb/ce6230.c
@@ -274,7 +274,7 @@ static struct dvb_usb_device_properties ce6230_properties = {
 				.endpoint = 0x82,
 				.u = {
 					.bulk = {
-						.buffersize = 512,
+						.buffersize = (16*512),
 					}
 				}
 			},
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index d1d6f449140..0b2812aa30a 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -4,13 +4,14 @@
  *	under the terms of the GNU General Public License as published by the Free
  *	Software Foundation, version 2.
  *
- *  Copyright (C) 2005-7 DiBcom, SA
+ *  Copyright (C) 2005-9 DiBcom, SA et al
  */
 #include "dib0700.h"
 
 #include "dib3000mc.h"
 #include "dib7000m.h"
 #include "dib7000p.h"
+#include "dib8000.h"
 #include "mt2060.h"
 #include "mt2266.h"
 #include "tuner-xc2028.h"
@@ -1098,11 +1099,13 @@ static struct dibx000_agc_config dib7070_agc_config = {
 
 static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
 {
+	deb_info("reset: %d", onoff);
 	return dib7000p_set_gpio(fe, 8, 0, !onoff);
 }
 
 static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
 {
+	deb_info("sleep: %d", onoff);
 	return dib7000p_set_gpio(fe, 9, 0, onoff);
 }
 
@@ -1112,16 +1115,26 @@ static struct dib0070_config dib7070p_dib0070_config[2] = {
 		.reset = dib7070_tuner_reset,
 		.sleep = dib7070_tuner_sleep,
 		.clock_khz = 12000,
-		.clock_pad_drive = 4
+		.clock_pad_drive = 4,
+		.charge_pump = 2,
 	}, {
 		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
 		.reset = dib7070_tuner_reset,
 		.sleep = dib7070_tuner_sleep,
 		.clock_khz = 12000,
-
+		.charge_pump = 2,
 	}
 };
 
+static struct dib0070_config dib7770p_dib0070_config = {
+	 .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+	 .reset = dib7070_tuner_reset,
+	 .sleep = dib7070_tuner_sleep,
+	 .clock_khz = 12000,
+	 .clock_pad_drive = 0,
+	 .flip_chip = 1,
+};
+
 static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
 {
 	struct dvb_usb_adapter *adap = fe->dvb->priv;
@@ -1139,6 +1152,45 @@ static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_fronte
 	return state->set_param_save(fe, fep);
 }
 
+static int dib7770_set_param_override(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *fep)
+{
+	 struct dvb_usb_adapter *adap = fe->dvb->priv;
+	 struct dib0700_adapter_state *state = adap->priv;
+
+	 u16 offset;
+	 u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+	 switch (band) {
+	 case BAND_VHF:
+		  dib7000p_set_gpio(fe, 0, 0, 1);
+		  offset = 850;
+		  break;
+	 case BAND_UHF:
+	 default:
+		  dib7000p_set_gpio(fe, 0, 0, 0);
+		  offset = 250;
+		  break;
+	 }
+	 deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
+	 dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
+	 return state->set_param_save(fe, fep);
+}
+
+static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	 struct dib0700_adapter_state *st = adap->priv;
+	 struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe,
+			 DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	 if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				 &dib7770p_dib0070_config) == NULL)
+		 return -ENODEV;
+
+	 st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+	 adap->fe->ops.tuner_ops.set_params = dib7770_set_param_override;
+	 return 0;
+}
+
 static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
 {
 	struct dib0700_adapter_state *st = adap->priv;
@@ -1217,6 +1269,306 @@ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
 	return adap->fe == NULL ? -ENODEV : 0;
 }
 
+/* DIB807x generic */
+static struct dibx000_agc_config dib807x_agc_config[2] = {
+	{
+		BAND_VHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup*/
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}, {
+		BAND_UHF,
+		/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+		 * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+		 * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+		 * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+		 * P_agc_write=0 */
+		(0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) |
+			(0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) |
+			(0 << 0), /* setup */
+
+		600, /* inv_gain*/
+		10,  /* time_stabiliz*/
+
+		0,  /* alpha_level*/
+		118,  /* thlock*/
+
+		0,     /* wbd_inv*/
+		3530,  /* wbd_ref*/
+		1,     /* wbd_sel*/
+		5,     /* wbd_alpha*/
+
+		65535,  /* agc1_max*/
+		0,  /* agc1_min*/
+
+		65535,  /* agc2_max*/
+		0,      /* agc2_min*/
+
+		0,      /* agc1_pt1*/
+		40,     /* agc1_pt2*/
+		183,    /* agc1_pt3*/
+		206,    /* agc1_slope1*/
+		255,    /* agc1_slope2*/
+		72,     /* agc2_pt1*/
+		152,    /* agc2_pt2*/
+		88,     /* agc2_slope1*/
+		90,     /* agc2_slope2*/
+
+		17,  /* alpha_mant*/
+		27,  /* alpha_exp*/
+		23,  /* beta_mant*/
+		51,  /* beta_exp*/
+
+		0,  /* perform_agc_softsplit*/
+	}
+};
+
+static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = {
+	60000, 15000, /* internal, sampling*/
+	1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/
+	0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core,
+			  ADClkSrc, modulo */
+	(3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/
+	(0 << 25) | 0, /* ifreq = 0.000000 MHz*/
+	18179755, /* timf*/
+	12000000, /* xtal_hz*/
+};
+
+static struct dib8000_config dib807x_dib8000_config[2] = {
+	{
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.div_cfg = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}, {
+		.output_mpeg2_in_188_bytes = 1,
+
+		.agc_config_count = 2,
+		.agc = dib807x_agc_config,
+		.pll = &dib807x_bw_config_12_mhz,
+		.tuner_is_baseband = 1,
+
+		.gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+		.gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+		.gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+		.hostbus_diversity = 1,
+		.agc_control = &dib0070_ctrl_agc_filter,
+		.output_mode = OUTMODE_MPEG2_FIFO,
+		.drives = 0x2d98,
+	}
+};
+
+static int dib807x_tuner_reset(struct dvb_frontend *fe, int onoff)
+{
+	return dib8000_set_gpio(fe, 5, 0, !onoff);
+}
+
+static int dib807x_tuner_sleep(struct dvb_frontend *fe, int onoff)
+{
+	return dib8000_set_gpio(fe, 0, 0, onoff);
+}
+
+static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = {
+    { 240,      7},
+    { 0xffff,   6},
+};
+
+static struct dib0070_config dib807x_dib0070_config[2] = {
+	{
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib807x_tuner_reset,
+		.sleep = dib807x_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 4,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -100,
+		.freq_offset_khz_vhf = -100,
+	}, {
+		.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
+		.reset = dib807x_tuner_reset,
+		.sleep = dib807x_tuner_sleep,
+		.clock_khz = 12000,
+		.clock_pad_drive = 2,
+		.vga_filter = 1,
+		.force_crystal_mode = 1,
+		.enable_third_order_filter = 1,
+		.charge_pump = 0,
+		.wbd_gain = dib8070_wbd_gain_cfg,
+		.osc_buffer_state = 0,
+		.freq_offset_khz_uhf = -25,
+		.freq_offset_khz_vhf = -25,
+	}
+};
+
+static int dib807x_set_param_override(struct dvb_frontend *fe,
+		struct dvb_frontend_parameters *fep)
+{
+	struct dvb_usb_adapter *adap = fe->dvb->priv;
+	struct dib0700_adapter_state *state = adap->priv;
+
+	u16 offset = dib0070_wbd_offset(fe);
+	u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
+	switch (band) {
+	case BAND_VHF:
+		offset += 750;
+		break;
+	case BAND_UHF:  /* fall-thru wanted */
+	default:
+		offset += 250; break;
+	}
+	deb_info("WBD for DiB8000: %d\n", offset);
+	dib8000_set_wbd_ref(fe, offset);
+
+	return state->set_param_save(fe, fep);
+}
+
+static int dib807x_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	struct dib0700_adapter_state *st = adap->priv;
+	struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe,
+			DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	if (adap->id == 0) {
+		if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				&dib807x_dib0070_config[0]) == NULL)
+			return -ENODEV;
+	} else {
+		if (dvb_attach(dib0070_attach, adap->fe, tun_i2c,
+				&dib807x_dib0070_config[1]) == NULL)
+			return -ENODEV;
+	}
+
+	st->set_param_save = adap->fe->ops.tuner_ops.set_params;
+	adap->fe->ops.tuner_ops.set_params = dib807x_set_param_override;
+	return 0;
+}
+
+
+/* STK807x */
+static int stk807x_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18,
+				0x80);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe == NULL ?  -ENODEV : 0;
+}
+
+/* STK807xPVR */
+static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap)
+{
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+	msleep(30);
+	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+	msleep(500);
+	dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+	dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+	msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+	/* initialize IC 0 */
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x80);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80,
+			      &dib807x_dib8000_config[0]);
+
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap)
+{
+	/* initialize IC 1 */
+	dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x82);
+
+	adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82,
+			      &dib807x_dib8000_config[1]);
+
+	return adap->fe == NULL ? -ENODEV : 0;
+}
+
+
 /* STK7070PD */
 static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
 	{
@@ -1500,7 +1852,15 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T3) },
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_T5) },
 	{ USB_DEVICE(USB_VID_YUAN,      USB_PID_YUAN_STK7700D) },
-	{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_STK7700D_2) },
+/* 55 */{ USB_DEVICE(USB_VID_YUAN,	USB_PID_YUAN_STK7700D_2) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73A) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV73ESE) },
+	{ USB_DEVICE(USB_VID_PINNACLE,	USB_PID_PINNACLE_PCTV282E) },
+	{ USB_DEVICE(USB_VID_DIBCOM,	USB_PID_DIBCOM_STK7770P) },
+/* 60 */{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS_2) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XPVR) },
+	{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK807XP) },
+	{ USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1565,7 +1925,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 			{   "Leadtek Winfast DTV Dongle (STK7700P based)",
-				{ &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] },
+				{ &dib0700_usb_id_table[8] },
 				{ NULL },
 			},
 			{   "AVerMedia AVerTV DVB-T Express",
@@ -1764,6 +2124,41 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7070p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv     = sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 3,
+		.devices = {
+			{   "Pinnacle PCTV 73A",
+				{ &dib0700_usb_id_table[56], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 73e SE",
+				{ &dib0700_usb_id_table[57], NULL },
+				{ NULL },
+			},
+			{   "Pinnacle PCTV 282e",
+				{ &dib0700_usb_id_table[58], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
 		.num_adapters = 2,
 		.adapter = {
 			{
@@ -1927,6 +2322,102 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 				{ NULL },
 			},
 		},
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk7070p_frontend_attach,
+				.tuner_attach     = dib7770p_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "DiBcom STK7770P reference design",
+				{ &dib0700_usb_id_table[59], NULL },
+				{ NULL },
+			},
+			{   "Terratec Cinergy T USB XXS (HD)",
+				{ &dib0700_usb_id_table[34], &dib0700_usb_id_table[60] },
+				{ NULL },
+			},
+		},
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 1,
+		.adapter = {
+			{
+				.frontend_attach  = stk807x_frontend_attach,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 2,
+		.devices = {
+			{   "DiBcom STK807xP reference design",
+				{ &dib0700_usb_id_table[62], NULL },
+				{ NULL },
+			},
+			{   "Prolink Pixelview SBTVD",
+				{ &dib0700_usb_id_table[63], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
+
+	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+		.num_adapters = 2,
+		.adapter = {
+			{
+				.frontend_attach  = stk807xpvr_frontend_attach0,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+			{
+				.frontend_attach  = stk807xpvr_frontend_attach1,
+				.tuner_attach     = dib807x_tuner_attach,
+
+				DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
+
+				.size_of_priv =
+					sizeof(struct dib0700_adapter_state),
+			},
+		},
+
+		.num_device_descs = 1,
+		.devices = {
+			{   "DiBcom STK807xPVR reference design",
+				{ &dib0700_usb_id_table[61], NULL },
+				{ NULL },
+			},
+		},
+
+		.rc_interval      = DEFAULT_RC_INTERVAL,
+		.rc_key_map       = dib0700_rc_keys,
+		.rc_key_map_size  = ARRAY_SIZE(dib0700_rc_keys),
+		.rc_query         = dib0700_rc_query
 	},
 };
 
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 185a5069b10..a548c14c194 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -46,6 +46,7 @@
 #define USB_VID_MSI_2				0x1462
 #define USB_VID_OPERA1				0x695c
 #define USB_VID_PINNACLE			0x2304
+#define USB_VID_PIXELVIEW			0x1554
 #define USB_VID_TECHNOTREND			0x0b48
 #define USB_VID_TERRATEC			0x0ccd
 #define USB_VID_TELESTAR			0x10b9
@@ -59,6 +60,7 @@
 #define USB_VID_YUAN				0x1164
 #define USB_VID_XTENSIONS			0x1ae7
 #define USB_VID_HUMAX_COEX			0x10b9
+#define USB_VID_774				0x7a69
 
 /* Product IDs */
 #define USB_PID_ADSTECH_USB2_COLD			0xa333
@@ -95,7 +97,10 @@
 #define USB_PID_DIBCOM_STK7700_U7000			0x7001
 #define USB_PID_DIBCOM_STK7070P				0x1ebc
 #define USB_PID_DIBCOM_STK7070PD			0x1ebe
+#define USB_PID_DIBCOM_STK807XP				0x1f90
+#define USB_PID_DIBCOM_STK807XPVR			0x1f98
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
+#define USB_PID_DIBCOM_STK7770P				0x1e80
 #define USB_PID_DPOSH_M9206_COLD			0x9206
 #define USB_PID_DPOSH_M9206_WARM			0xa090
 #define USB_PID_UNIWILL_STK7700P			0x6003
@@ -184,6 +189,7 @@
 #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS		0x0060
 #define USB_PID_TERRATEC_CINERGY_T_EXPRESS		0x0062
 #define USB_PID_TERRATEC_CINERGY_T_XXS			0x0078
+#define USB_PID_TERRATEC_CINERGY_T_XXS_2		0x00ab
 #define USB_PID_TERRATEC_T3				0x10a0
 #define USB_PID_TERRATEC_T5				0x10a1
 #define USB_PID_PINNACLE_EXPRESSCARD_320CX		0x022e
@@ -195,6 +201,10 @@
 #define USB_PID_PINNACLE_PCTV73E			0x0237
 #define USB_PID_PINNACLE_PCTV801E			0x023a
 #define USB_PID_PINNACLE_PCTV801E_SE			0x023b
+#define USB_PID_PINNACLE_PCTV73A			0x0243
+#define USB_PID_PINNACLE_PCTV73ESE			0x0245
+#define USB_PID_PINNACLE_PCTV282E			0x0248
+#define USB_PID_PIXELVIEW_SBTVD				0x5010
 #define USB_PID_PCTV_200E				0x020e
 #define USB_PID_PCTV_400E				0x020f
 #define USB_PID_PCTV_450E				0x0222
@@ -265,5 +275,6 @@
 #define USB_PID_ELGATO_EYETV_DTT_Dlx			0x0020
 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD		0x5000
 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM		0x5001
+#define USB_PID_FRIIO_WHITE				0x0001
 
 #endif
diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
new file mode 100644
index 00000000000..c4dfe25cf60
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -0,0 +1,483 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include "friio.h"
+
+struct jdvbt90502_state {
+	struct i2c_adapter *i2c;
+	struct dvb_frontend frontend;
+	struct jdvbt90502_config config;
+};
+
+/* NOTE: TC90502 has 16bit register-address? */
+/* register 0x0100 is used for reading PLL status, so reg is u16 here */
+static int jdvbt90502_reg_read(struct jdvbt90502_state *state,
+			       const u16 reg, u8 *buf, const size_t count)
+{
+	int ret;
+	u8 wbuf[3];
+	struct i2c_msg msg[2];
+
+	wbuf[0] = reg & 0xFF;
+	wbuf[1] = 0;
+	wbuf[2] = reg >> 8;
+
+	msg[0].addr = state->config.demod_address;
+	msg[0].flags = 0;
+	msg[0].buf = wbuf;
+	msg[0].len = sizeof(wbuf);
+
+	msg[1].addr = msg[0].addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].buf = buf;
+	msg[1].len = count;
+
+	ret = i2c_transfer(state->i2c, msg, 2);
+	if (ret != 2) {
+		deb_fe(" reg read failed.\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+/* currently 16bit register-address is not used, so reg is u8 here */
+static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state,
+				       const u8 reg, const u8 val)
+{
+	struct i2c_msg msg;
+	u8 wbuf[2];
+
+	wbuf[0] = reg;
+	wbuf[1] = val;
+
+	msg.addr = state->config.demod_address;
+	msg.flags = 0;
+	msg.buf = wbuf;
+	msg.len = sizeof(wbuf);
+
+	if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+		deb_fe(" reg write failed.");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int _jdvbt90502_write(struct dvb_frontend *fe, u8 *buf, int len)
+{
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+	int err, i;
+	for (i = 0; i < len - 1; i++) {
+		err = jdvbt90502_single_reg_write(state,
+						  buf[0] + i, buf[i + 1]);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+/* read pll status byte via the demodulator's I2C register */
+/* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */
+static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result)
+{
+	int ret;
+
+	/* +1 for reading */
+	u8 pll_addr_byte = (state->config.pll_address << 1) + 1;
+
+	*result = 0;
+
+	ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG,
+					  pll_addr_byte);
+	if (ret)
+		goto error;
+
+	ret = jdvbt90502_reg_read(state, 0x0100, result, 1);
+	if (ret)
+		goto error;
+
+	deb_fe("PLL read val:%02x\n", *result);
+	return 0;
+
+error:
+	deb_fe("%s:ret == %d\n", __func__, ret);
+	return -EREMOTEIO;
+}
+
+
+/* set pll frequency via the demodulator's I2C register */
+static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq)
+{
+	int ret;
+	int retry;
+	u8 res1;
+	u8 res2[9];
+
+	u8 pll_freq_cmd[PLL_CMD_LEN];
+	u8 pll_agc_cmd[PLL_CMD_LEN];
+	struct i2c_msg msg[2];
+	u32 f;
+
+	deb_fe("%s: freq=%d, step=%d\n", __func__, freq,
+	       state->frontend.ops.info.frequency_stepsize);
+	/* freq -> oscilator frequency conversion. */
+	/* freq: 473,000,000 + n*6,000,000 (no 1/7MHz shift to center freq) */
+	/* add 400[1/7 MHZ] = 57.142857MHz.   57MHz for the IF,  */
+	/*                                   1/7MHz for center freq shift */
+	f = freq / state->frontend.ops.info.frequency_stepsize;
+	f += 400;
+	pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */
+	pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1;
+	pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F;
+	pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF;
+	pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */
+	pll_freq_cmd[BANDSWITCH_BYTE] = 0x08;	/* UHF band */
+
+	msg[0].addr = state->config.demod_address;
+	msg[0].flags = 0;
+	msg[0].buf = pll_freq_cmd;
+	msg[0].len = sizeof(pll_freq_cmd);
+
+	ret = i2c_transfer(state->i2c, &msg[0], 1);
+	if (ret != 1)
+		goto error;
+
+	udelay(50);
+
+	pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG];
+	pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE];
+	pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1];
+	pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2];
+	pll_agc_cmd[CONTROL_BYTE] = 0x9A; /*  AGC_CTRL instead of BANDSWITCH */
+	pll_agc_cmd[AGC_CTRL_BYTE] = 0x50;
+	/* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */
+
+	msg[1].addr = msg[0].addr;
+	msg[1].flags = 0;
+	msg[1].buf = pll_agc_cmd;
+	msg[1].len = sizeof(pll_agc_cmd);
+
+	ret = i2c_transfer(state->i2c, &msg[1], 1);
+	if (ret != 1)
+		goto error;
+
+	/* I don't know what these cmds are for,  */
+	/* but the USB log on a windows box contains them */
+	ret = jdvbt90502_single_reg_write(state, 0x01, 0x40);
+	ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00);
+	if (ret)
+		goto error;
+	udelay(100);
+
+	/* wait for the demod to be ready? */
+#define RETRY_COUNT 5
+	for (retry = 0; retry < RETRY_COUNT; retry++) {
+		ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1);
+		if (ret)
+			goto error;
+		/* if (res1 != 0x00) goto error; */
+		ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2));
+		if (ret)
+			goto error;
+		if (res2[0] >= 0xA7)
+			break;
+		msleep(100);
+	}
+	if (retry >= RETRY_COUNT) {
+		deb_fe("%s: FE does not get ready after freq setting.\n",
+		       __func__);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+error:
+	deb_fe("%s:ret == %d\n", __func__, ret);
+	return -EREMOTEIO;
+}
+
+static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state)
+{
+	u8 result;
+	int ret;
+
+	*state = FE_HAS_SIGNAL;
+
+	ret = jdvbt90502_pll_read(fe->demodulator_priv, &result);
+	if (ret) {
+		deb_fe("%s:ret == %d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+
+	*state = FE_HAS_SIGNAL
+		| FE_HAS_CARRIER
+		| FE_HAS_VITERBI
+		| FE_HAS_SYNC;
+
+	if (result & PLL_STATUS_LOCKED)
+		*state |= FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int jdvbt90502_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	*ber = 0;
+	return 0;
+}
+
+static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe,
+					   u16 *strength)
+{
+	int ret;
+	u8 rbuf[37];
+
+	*strength = 0;
+
+	/* status register (incl. signal strength) : 0x89  */
+	/* TODO: read just the necessary registers [0x8B..0x8D]? */
+	ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089,
+				  rbuf, sizeof(rbuf));
+
+	if (ret) {
+		deb_fe("%s:ret == %d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+
+	/* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */
+	*strength = (rbuf[3] << 8) + rbuf[4];
+	if (rbuf[2])
+		*strength = 0xffff;
+
+	return 0;
+}
+
+static int jdvbt90502_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	*snr = 0x0101;
+	return 0;
+}
+
+static int jdvbt90502_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	*ucblocks = 0;
+	return 0;
+}
+
+static int jdvbt90502_get_tune_settings(struct dvb_frontend *fe,
+					struct dvb_frontend_tune_settings *fs)
+{
+	fs->min_delay_ms = 500;
+	fs->step_size = 0;
+	fs->max_drift = 0;
+
+	return 0;
+}
+
+static int jdvbt90502_get_frontend(struct dvb_frontend *fe,
+				   struct dvb_frontend_parameters *p)
+{
+	p->inversion = INVERSION_AUTO;
+	p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
+	p->u.ofdm.code_rate_HP = FEC_AUTO;
+	p->u.ofdm.code_rate_LP = FEC_AUTO;
+	p->u.ofdm.constellation = QAM_64;
+	p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO;
+	p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO;
+	p->u.ofdm.hierarchy_information = HIERARCHY_AUTO;
+	return 0;
+}
+
+static int jdvbt90502_set_frontend(struct dvb_frontend *fe,
+				   struct dvb_frontend_parameters *p)
+{
+	/**
+	 * NOTE: ignore all the paramters except frequency.
+	 *       others should be fixed to the proper value for ISDB-T,
+	 *       but don't check here.
+	 */
+
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+	int ret;
+
+	deb_fe("%s: Freq:%d\n", __func__, p->frequency);
+
+	ret = jdvbt90502_pll_set_freq(state, p->frequency);
+	if (ret) {
+		deb_fe("%s:ret == %d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int jdvbt90502_sleep(struct dvb_frontend *fe)
+{
+	deb_fe("%s called.\n", __func__);
+	return 0;
+}
+
+
+/**
+ * (reg, val) commad list to initialize this module.
+ *  captured on a Windows box.
+ */
+static u8 init_code[][2] = {
+	{0x01, 0x40},
+	{0x04, 0x38},
+	{0x05, 0x40},
+	{0x07, 0x40},
+	{0x0F, 0x4F},
+	{0x11, 0x21},
+	{0x12, 0x0B},
+	{0x13, 0x2F},
+	{0x14, 0x31},
+	{0x16, 0x02},
+	{0x21, 0xC4},
+	{0x22, 0x20},
+	{0x2C, 0x79},
+	{0x2D, 0x34},
+	{0x2F, 0x00},
+	{0x30, 0x28},
+	{0x31, 0x31},
+	{0x32, 0xDF},
+	{0x38, 0x01},
+	{0x39, 0x78},
+	{0x3B, 0x33},
+	{0x3C, 0x33},
+	{0x48, 0x90},
+	{0x51, 0x68},
+	{0x5E, 0x38},
+	{0x71, 0x00},
+	{0x72, 0x08},
+	{0x77, 0x00},
+	{0xC0, 0x21},
+	{0xC1, 0x10},
+	{0xE4, 0x1A},
+	{0xEA, 0x1F},
+	{0x77, 0x00},
+	{0x71, 0x00},
+	{0x71, 0x00},
+	{0x76, 0x0C},
+};
+
+const static int init_code_len = sizeof(init_code) / sizeof(u8[2]);
+
+static int jdvbt90502_init(struct dvb_frontend *fe)
+{
+	int i = -1;
+	int ret;
+	struct i2c_msg msg;
+
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+
+	deb_fe("%s called.\n", __func__);
+
+	msg.addr = state->config.demod_address;
+	msg.flags = 0;
+	msg.len = 2;
+	for (i = 0; i < init_code_len; i++) {
+		msg.buf = init_code[i];
+		ret = i2c_transfer(state->i2c, &msg, 1);
+		if (ret != 1)
+			goto error;
+	}
+	msleep(100);
+
+	return 0;
+
+error:
+	deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret);
+	return -EREMOTEIO;
+}
+
+
+static void jdvbt90502_release(struct dvb_frontend *fe)
+{
+	struct jdvbt90502_state *state = fe->demodulator_priv;
+	kfree(state);
+}
+
+
+static struct dvb_frontend_ops jdvbt90502_ops;
+
+struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d)
+{
+	struct jdvbt90502_state *state = NULL;
+
+	deb_info("%s called.\n", __func__);
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	/* setup the state */
+	state->i2c = &d->i2c_adap;
+	memcpy(&state->config, &friio_fe_config, sizeof(friio_fe_config));
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &jdvbt90502_ops,
+	       sizeof(jdvbt90502_ops));
+	state->frontend.demodulator_priv = state;
+
+	if (jdvbt90502_init(&state->frontend) < 0)
+		goto error;
+
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+
+static struct dvb_frontend_ops jdvbt90502_ops = {
+
+	.info = {
+		.name			= "Comtech JDVBT90502 ISDB-T",
+		.type			= FE_OFDM,
+		.frequency_min		= 473000000, /* UHF 13ch, center */
+		.frequency_max		= 767142857, /* UHF 62ch, center */
+		.frequency_stepsize	= JDVBT90502_PLL_CLK /
+							JDVBT90502_PLL_DIVIDER,
+		.frequency_tolerance	= 0,
+
+		/* NOTE: this driver ignores all parameters but frequency. */
+		.caps = FE_CAN_INVERSION_AUTO |
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+			FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO |
+			FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.release = jdvbt90502_release,
+
+	.init = jdvbt90502_init,
+	.sleep = jdvbt90502_sleep,
+	.write = _jdvbt90502_write,
+
+	.set_frontend = jdvbt90502_set_frontend,
+	.get_frontend = jdvbt90502_get_frontend,
+	.get_tune_settings = jdvbt90502_get_tune_settings,
+
+	.read_status = jdvbt90502_read_status,
+	.read_ber = jdvbt90502_read_ber,
+	.read_signal_strength = jdvbt90502_read_signal_strength,
+	.read_snr = jdvbt90502_read_snr,
+	.read_ucblocks = jdvbt90502_read_ucblocks,
+};
diff --git a/drivers/media/dvb/dvb-usb/friio.c b/drivers/media/dvb/dvb-usb/friio.c
new file mode 100644
index 00000000000..14a65b4aec0
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio.c
@@ -0,0 +1,525 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#include "friio.h"
+
+/* debug */
+int dvb_usb_friio_debug;
+module_param_named(debug, dvb_usb_friio_debug, int, 0644);
+MODULE_PARM_DESC(debug,
+		 "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))."
+		 DVB_USB_DEBUG_STATUS);
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+/**
+ * Indirect I2C access to the PLL via FE.
+ * whole I2C protocol data to the PLL is sent via the FE's I2C register.
+ * This is done by a control msg to the FE with the I2C data accompanied, and
+ * a specific USB request number is assigned for that purpose.
+ *
+ * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE).
+ * TODO: refoctored, smarter i2c functions.
+ */
+static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr,
+				  u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+	u16 index = wbuf[0];	/* must be JDVBT90502_2ND_I2C_REG(=0xFE) */
+	u16 value = addr << (8 + 1);
+	int wo = (rbuf == NULL || rlen == 0);	/* write only */
+	u8 req, type;
+
+	deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n",
+		 wbuf[1], wbuf[0], wlen - 1);
+
+	if (wo && wlen >= 2) {
+		req = GL861_REQ_I2C_DATA_CTRL_WRITE;
+		type = GL861_WRITE;
+		udelay(20);
+		return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+				       req, type, value, index,
+				       &wbuf[1], wlen - 1, 2000);
+	}
+
+	deb_xfer("not supported ctrl-msg, aborting.");
+	return -EINVAL;
+}
+
+/* normal I2C access (without extra data arguments).
+ * write to the register wbuf[0] at I2C address addr with the value wbuf[1],
+ *  or read from the register wbuf[0].
+ * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3
+ */
+static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
+			 u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
+{
+	u16 index;
+	u16 value = addr << (8 + 1);
+	int wo = (rbuf == NULL || rlen == 0);	/* write-only */
+	u8 req, type;
+	unsigned int pipe;
+
+	/* special case for the indirect I2C access to the PLL via FE, */
+	if (addr == friio_fe_config.demod_address &&
+	    wbuf[0] == JDVBT90502_2ND_I2C_REG)
+		return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen);
+
+	if (wo) {
+		req = GL861_REQ_I2C_WRITE;
+		type = GL861_WRITE;
+		pipe = usb_sndctrlpipe(d->udev, 0);
+	} else {		/* rw */
+		req = GL861_REQ_I2C_READ;
+		type = GL861_READ;
+		pipe = usb_rcvctrlpipe(d->udev, 0);
+	}
+
+	switch (wlen) {
+	case 1:
+		index = wbuf[0];
+		break;
+	case 2:
+		index = wbuf[0];
+		value = value + wbuf[1];
+		break;
+	case 3:
+		/* special case for 16bit register-address */
+		index = (wbuf[2] << 8) | wbuf[0];
+		value = value + wbuf[1];
+		break;
+	default:
+		deb_xfer("wlen = %x, aborting.", wlen);
+		return -EINVAL;
+	}
+	msleep(1);
+	return usb_control_msg(d->udev, pipe, req, type,
+			       value, index, rbuf, rlen, 2000);
+}
+
+/* I2C */
+static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+			  int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	int i;
+
+
+	if (num > 2)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	for (i = 0; i < num; i++) {
+		/* write/read request */
+		if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
+			if (gl861_i2c_msg(d, msg[i].addr,
+					  msg[i].buf, msg[i].len,
+					  msg[i + 1].buf, msg[i + 1].len) < 0)
+				break;
+			i++;
+		} else
+			if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
+					  msg[i].len, NULL, 0) < 0)
+				break;
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+	return i;
+}
+
+static u32 gl861_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+
+static int friio_ext_ctl(struct dvb_usb_adapter *adap,
+			 u32 sat_color, int lnb_on)
+{
+	int i;
+	int ret;
+	struct i2c_msg msg;
+	u8 buf[2];
+	u32 mask;
+	u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0;
+
+	msg.addr = 0x00;
+	msg.flags = 0;
+	msg.len = 2;
+	msg.buf = buf;
+
+	buf[0] = 0x00;
+
+	/* send 2bit header (&B10) */
+	buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE;
+	ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+	buf[1] = lnb | FRIIO_CTL_STROBE;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+	/* send 32bit(satur, R, G, B) data in serial */
+	mask = 1 << 31;
+	for (i = 0; i < 32; i++) {
+		buf[1] = lnb | FRIIO_CTL_STROBE;
+		if (sat_color & mask)
+			buf[1] |= FRIIO_CTL_LED;
+		ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+		buf[1] |= FRIIO_CTL_CLK;
+		ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+		mask >>= 1;
+	}
+
+	/* set the strobe off */
+	buf[1] = lnb;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+	buf[1] |= FRIIO_CTL_CLK;
+	ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
+
+	return (ret == 70);
+}
+
+
+static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
+
+/* TODO: move these init cmds to the FE's init routine? */
+static u8 streaming_init_cmds[][2] = {
+	{0x33, 0x08},
+	{0x37, 0x40},
+	{0x3A, 0x1F},
+	{0x3B, 0xFF},
+	{0x3C, 0x1F},
+	{0x3D, 0xFF},
+	{0x38, 0x00},
+	{0x35, 0x00},
+	{0x39, 0x00},
+	{0x36, 0x00},
+};
+static int cmdlen = sizeof(streaming_init_cmds) / 2;
+
+/*
+ * Command sequence in this init function is a replay
+ *  of the captured USB commands from the Windows proprietary driver.
+ */
+static int friio_initialize(struct dvb_usb_device *d)
+{
+	int ret;
+	int i;
+	int retry = 0;
+	u8 rbuf[2];
+	u8 wbuf[3];
+
+	deb_info("%s called.\n", __func__);
+
+	/* use gl861_i2c_msg instead of gl861_i2c_xfer(), */
+	/* because the i2c device is not set up yet. */
+	wbuf[0] = 0x11;
+	wbuf[1] = 0x02;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+	msleep(2);
+
+	wbuf[0] = 0x11;
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+	msleep(1);
+
+	/* following msgs should be in the FE's init code? */
+	/* cmd sequence to identify the device type? (friio black/white) */
+	wbuf[0] = 0x03;
+	wbuf[1] = 0x80;
+	/* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */
+	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+			      GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
+			      0x1200, 0x0100, wbuf, 2, 2000);
+	if (ret < 0)
+		goto error;
+
+	msleep(2);
+	wbuf[0] = 0x00;
+	wbuf[2] = 0x01;		/* reg.0x0100 */
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2);
+	/* my Friio White returns 0xffff. */
+	if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
+		goto error;
+
+	msleep(2);
+	wbuf[0] = 0x03;
+	wbuf[1] = 0x80;
+	ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
+			      GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
+			      0x9000, 0x0100, wbuf, 2, 2000);
+	if (ret < 0)
+		goto error;
+
+	msleep(2);
+	wbuf[0] = 0x00;
+	wbuf[2] = 0x01;		/* reg.0x0100 */
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2);
+	/* my Friio White returns 0xffff again. */
+	if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
+		goto error;
+
+	msleep(1);
+
+restart:
+	/* ============ start DEMOD init cmds ================== */
+	/* read PLL status to clear the POR bit */
+	wbuf[0] = JDVBT90502_2ND_I2C_REG;
+	wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1;	/* +1 for reading */
+	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	msleep(5);
+	/* note: DEMODULATOR has 16bit register-address. */
+	wbuf[0] = 0x00;
+	wbuf[2] = 0x01;		/* reg addr: 0x0100 */
+	wbuf[1] = 0x00;		/* val: not used */
+	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1);
+	if (ret < 0)
+		goto error;
+/*
+	msleep(1);
+	wbuf[0] = 0x80;
+	wbuf[1] = 0x00;
+	ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1);
+	if (ret < 0)
+		goto error;
+ */
+	if (rbuf[0] & 0x80) {	/* still in PowerOnReset state? */
+		if (++retry > 3) {
+			deb_info("failed to get the correct"
+				 " FE demod status:0x%02x\n", rbuf[0]);
+			goto error;
+		}
+		msleep(100);
+		goto restart;
+	}
+
+	/* TODO: check return value in rbuf */
+	/* =========== end DEMOD init cmds ===================== */
+	msleep(1);
+
+	wbuf[0] = 0x30;
+	wbuf[1] = 0x04;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	msleep(2);
+	/* following 2 cmds unnecessary? */
+	wbuf[0] = 0x00;
+	wbuf[1] = 0x01;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	wbuf[0] = 0x06;
+	wbuf[1] = 0x0F;
+	ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+	if (ret < 0)
+		goto error;
+
+	/* some streaming ctl cmds (maybe) */
+	msleep(10);
+	for (i = 0; i < cmdlen; i++) {
+		ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2,
+				    NULL, 0);
+		if (ret < 0)
+			goto error;
+		msleep(1);
+	}
+	msleep(20);
+
+	/* change the LED color etc. */
+	ret = friio_streaming_ctrl(&d->adapter[0], 0);
+	if (ret < 0)
+		goto error;
+
+	return 0;
+
+error:
+	deb_info("%s:ret == %d\n", __func__, ret);
+	return -EIO;
+}
+
+/* Callbacks for DVB USB */
+
+static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+	int ret;
+
+	deb_info("%s called.(%d)\n", __func__, onoff);
+
+	/* set the LED color and saturation (and LNB on) */
+	if (onoff)
+		ret = friio_ext_ctl(adap, 0x6400ff64, 1);
+	else
+		ret = friio_ext_ctl(adap, 0x96ff00ff, 1);
+
+	if (ret != 1) {
+		deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret);
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+static int friio_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	if (friio_initialize(adap->dev) < 0)
+		return -EIO;
+
+	adap->fe = jdvbt90502_attach(adap->dev);
+	if (adap->fe == NULL)
+		return -EIO;
+
+	return 0;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties friio_properties;
+
+static int friio_probe(struct usb_interface *intf,
+		       const struct usb_device_id *id)
+{
+	struct dvb_usb_device *d;
+	struct usb_host_interface *alt;
+	int ret;
+
+	if (intf->num_altsetting < GL861_ALTSETTING_COUNT)
+		return -ENODEV;
+
+	alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING);
+	if (alt == NULL) {
+		deb_rc("not alt found!\n");
+		return -ENODEV;
+	}
+	ret = usb_set_interface(interface_to_usbdev(intf),
+				alt->desc.bInterfaceNumber,
+				alt->desc.bAlternateSetting);
+	if (ret != 0) {
+		deb_rc("failed to set alt-setting!\n");
+		return ret;
+	}
+
+	ret = dvb_usb_device_init(intf, &friio_properties,
+				  THIS_MODULE, &d, adapter_nr);
+	if (ret == 0)
+		friio_streaming_ctrl(&d->adapter[0], 1);
+
+	return ret;
+}
+
+
+struct jdvbt90502_config friio_fe_config = {
+	.demod_address = FRIIO_DEMOD_ADDR,
+	.pll_address = FRIIO_PLL_ADDR,
+};
+
+static struct i2c_algorithm gl861_i2c_algo = {
+	.master_xfer   = gl861_i2c_xfer,
+	.functionality = gl861_i2c_func,
+};
+
+static struct usb_device_id friio_table[] = {
+	{ USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) },
+	{ }		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, friio_table);
+
+
+static struct dvb_usb_device_properties friio_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+	.usb_ctrl = DEVICE_SPECIFIC,
+
+	.size_of_priv = 0,
+
+	.num_adapters = 1,
+	.adapter = {
+		/* caps:0 =>  no pid filter, 188B TS packet */
+		/* GL861 has a HW pid filter, but no info available. */
+		{
+			.caps  = 0,
+
+			.frontend_attach  = friio_frontend_attach,
+			.streaming_ctrl = friio_streaming_ctrl,
+
+			.stream = {
+				.type = USB_BULK,
+				/* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */
+				.count = 8,
+				.endpoint = 0x01,
+				.u = {
+					/* GL861 has 6KB buf inside */
+					.bulk = {
+						.buffersize = 16384,
+					}
+				}
+			},
+		}
+	},
+	.i2c_algo = &gl861_i2c_algo,
+
+	.num_device_descs = 1,
+	.devices = {
+		{
+			.name = "774 Friio ISDB-T USB2.0",
+			.cold_ids = { NULL },
+			.warm_ids = { &friio_table[0], NULL },
+		},
+	}
+};
+
+static struct usb_driver friio_driver = {
+	.name		= "dvb_usb_friio",
+	.probe		= friio_probe,
+	.disconnect	= dvb_usb_device_exit,
+	.id_table	= friio_table,
+};
+
+
+/* module stuff */
+static int __init friio_module_init(void)
+{
+	int ret;
+
+	ret = usb_register(&friio_driver);
+	if (ret)
+		err("usb_register failed. Error number %d", ret);
+
+	return ret;
+}
+
+
+static void __exit friio_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&friio_driver);
+}
+
+module_init(friio_module_init);
+module_exit(friio_module_exit);
+
+MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>");
+MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver");
+MODULE_VERSION("0.2");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h
new file mode 100644
index 00000000000..af8d55e390f
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/friio.h
@@ -0,0 +1,99 @@
+/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
+ *
+ * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
+ *
+ * This module is based off the the gl861 and vp702x modules.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_FRIIO_H_
+#define _DVB_USB_FRIIO_H_
+
+/**
+ *      Friio Components
+ *       USB hub:                                AU4254
+ *         USB controller(+ TS dmx & streaming): GL861
+ *         Frontend:                             comtech JDVBT-90502
+ *             (tuner PLL:                       tua6034, I2C addr:(0xC0 >> 1))
+ *             (OFDM demodulator:                TC90502, I2C addr:(0x30 >> 1))
+ *         LED x3 (+LNB) controll:               PIC 16F676
+ *         EEPROM:                               24C08
+ *
+ *        (USB smart card reader:                AU9522)
+ *
+ */
+
+#define DVB_USB_LOG_PREFIX "friio"
+#include "dvb-usb.h"
+
+extern int dvb_usb_friio_debug;
+#define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args)
+#define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args)
+#define deb_rc(args...)   dprintk(dvb_usb_friio_debug, 0x04, args)
+#define deb_fe(args...)   dprintk(dvb_usb_friio_debug, 0x08, args)
+
+/* Vendor requests */
+#define GL861_WRITE		0x40
+#define GL861_READ		0xc0
+
+/* command bytes */
+#define GL861_REQ_I2C_WRITE	0x01
+#define GL861_REQ_I2C_READ	0x02
+/* For control msg with data argument */
+/* Used for accessing the PLL on the secondary I2C bus of FE via GL861 */
+#define GL861_REQ_I2C_DATA_CTRL_WRITE	0x03
+
+#define GL861_ALTSETTING_COUNT	2
+#define FRIIO_BULK_ALTSETTING	0
+#define FRIIO_ISOC_ALTSETTING	1
+
+/* LED & LNB control via PIC. */
+/* basically, it's serial control with clock and strobe. */
+/* write the below 4bit control data to the reg 0x00 at the I2C addr 0x00 */
+/* when controlling the LEDs, 32bit(saturation, R, G, B) is sent on the bit3*/
+#define FRIIO_CTL_LNB (1 << 0)
+#define FRIIO_CTL_STROBE (1 << 1)
+#define FRIIO_CTL_CLK (1 << 2)
+#define FRIIO_CTL_LED (1 << 3)
+
+/* Front End related */
+
+#define FRIIO_DEMOD_ADDR  (0x30 >> 1)
+#define FRIIO_PLL_ADDR  (0xC0 >> 1)
+
+#define JDVBT90502_PLL_CLK	4000000
+#define JDVBT90502_PLL_DIVIDER	28
+
+#define JDVBT90502_2ND_I2C_REG 0xFE
+
+/* byte index for pll i2c command data structure*/
+/* see datasheet for tua6034 */
+#define DEMOD_REDIRECT_REG 0
+#define ADDRESS_BYTE       1
+#define DIVIDER_BYTE1      2
+#define DIVIDER_BYTE2      3
+#define CONTROL_BYTE       4
+#define BANDSWITCH_BYTE    5
+#define AGC_CTRL_BYTE      5
+#define PLL_CMD_LEN        6
+
+/* bit masks for PLL STATUS response */
+#define PLL_STATUS_POR_MODE   0x80 /* 1: Power on Reset (test) Mode */
+#define PLL_STATUS_LOCKED     0x40 /* 1: locked */
+#define PLL_STATUS_AGC_ACTIVE 0x08 /* 1:active */
+#define PLL_STATUS_TESTMODE   0x07 /* digital output level (5 level) */
+  /* 0.15Vcc step   0x00: < 0.15Vcc, ..., 0x04: >= 0.6Vcc (<= 1Vcc) */
+
+
+struct jdvbt90502_config {
+	u8 demod_address; /* i2c addr for demodulator IC */
+	u8 pll_address;   /* PLL addr on the secondary i2c*/
+};
+extern struct jdvbt90502_config friio_fe_config;
+
+extern struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d);
+#endif
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index aec7a1943b6..ef9b7bed13f 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -337,6 +337,8 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar
 	int i, pass, ret = 0;
 
 	buff = kmalloc(65536, GFP_KERNEL);
+	if (buff == NULL)
+		return -ENOMEM;
 
 	if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0)
 		goto done;