[media] move the dvb/frontends to drivers/media/dvb-frontends

Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 280 deletions

diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h
deleted file mode 100644
index 5f484881d7b..00000000000
--- a/drivers/media/dvb/frontends/dibx000_common.h
+++ /dev/null
@@ -1,280 +0,0 @@
-#ifndef DIBX000_COMMON_H
-#define DIBX000_COMMON_H
-
-enum dibx000_i2c_interface {
-	DIBX000_I2C_INTERFACE_TUNER = 0,
-	DIBX000_I2C_INTERFACE_GPIO_1_2 = 1,
-	DIBX000_I2C_INTERFACE_GPIO_3_4 = 2,
-	DIBX000_I2C_INTERFACE_GPIO_6_7 = 3
-};
-
-struct dibx000_i2c_master {
-#define DIB3000MC 1
-#define DIB7000   2
-#define DIB7000P  11
-#define DIB7000MC 12
-#define DIB8000   13
-	u16 device_rev;
-
-	enum dibx000_i2c_interface selected_interface;
-
-/*	struct i2c_adapter  tuner_i2c_adap; */
-	struct i2c_adapter gated_tuner_i2c_adap;
-	struct i2c_adapter master_i2c_adap_gpio12;
-	struct i2c_adapter master_i2c_adap_gpio34;
-	struct i2c_adapter master_i2c_adap_gpio67;
-
-	struct i2c_adapter *i2c_adap;
-	u8 i2c_addr;
-
-	u16 base_reg;
-
-	/* for the I2C transfer */
-	struct i2c_msg msg[34];
-	u8 i2c_write_buffer[8];
-	u8 i2c_read_buffer[2];
-	struct mutex i2c_buffer_lock;
-};
-
-extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst,
-					u16 device_rev, struct i2c_adapter *i2c_adap,
-					u8 i2c_addr);
-extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master
-							*mst,
-							enum dibx000_i2c_interface
-							intf, int gating);
-extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
-extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst);
-extern int dibx000_i2c_set_speed(struct i2c_adapter *i2c_adap, u16 speed);
-
-extern u32 systime(void);
-
-#define BAND_LBAND 0x01
-#define BAND_UHF   0x02
-#define BAND_VHF   0x04
-#define BAND_SBAND 0x08
-#define BAND_FM	   0x10
-#define BAND_CBAND 0x20
-
-#define BAND_OF_FREQUENCY(freq_kHz) ((freq_kHz) <= 170000 ? BAND_CBAND : \
-									(freq_kHz) <= 115000 ? BAND_FM : \
-									(freq_kHz) <= 250000 ? BAND_VHF : \
-									(freq_kHz) <= 863000 ? BAND_UHF : \
-									(freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )
-
-struct dibx000_agc_config {
-	/* defines the capabilities of this AGC-setting - using the BAND_-defines */
-	u8 band_caps;
-
-	u16 setup;
-
-	u16 inv_gain;
-	u16 time_stabiliz;
-
-	u8 alpha_level;
-	u16 thlock;
-
-	u8 wbd_inv;
-	u16 wbd_ref;
-	u8 wbd_sel;
-	u8 wbd_alpha;
-
-	u16 agc1_max;
-	u16 agc1_min;
-	u16 agc2_max;
-	u16 agc2_min;
-
-	u8 agc1_pt1;
-	u8 agc1_pt2;
-	u8 agc1_pt3;
-
-	u8 agc1_slope1;
-	u8 agc1_slope2;
-
-	u8 agc2_pt1;
-	u8 agc2_pt2;
-
-	u8 agc2_slope1;
-	u8 agc2_slope2;
-
-	u8 alpha_mant;
-	u8 alpha_exp;
-
-	u8 beta_mant;
-	u8 beta_exp;
-
-	u8 perform_agc_softsplit;
-
-	struct {
-		u16 min;
-		u16 max;
-		u16 min_thres;
-		u16 max_thres;
-	} split;
-};
-
-struct dibx000_bandwidth_config {
-	u32 internal;
-	u32 sampling;
-
-	u8 pll_prediv;
-	u8 pll_ratio;
-	u8 pll_range;
-	u8 pll_reset;
-	u8 pll_bypass;
-
-	u8 enable_refdiv;
-	u8 bypclk_div;
-	u8 IO_CLK_en_core;
-	u8 ADClkSrc;
-	u8 modulo;
-
-	u16 sad_cfg;
-
-	u32 ifreq;
-	u32 timf;
-
-	u32 xtal_hz;
-};
-
-enum dibx000_adc_states {
-	DIBX000_SLOW_ADC_ON = 0,
-	DIBX000_SLOW_ADC_OFF,
-	DIBX000_ADC_ON,
-	DIBX000_ADC_OFF,
-	DIBX000_VBG_ENABLE,
-	DIBX000_VBG_DISABLE,
-};
-
-#define BANDWIDTH_TO_KHZ(v)	((v) / 1000)
-#define BANDWIDTH_TO_HZ(v)	((v) * 1000)
-
-/* Chip output mode. */
-#define OUTMODE_HIGH_Z              0
-#define OUTMODE_MPEG2_PAR_GATED_CLK 1
-#define OUTMODE_MPEG2_PAR_CONT_CLK  2
-#define OUTMODE_MPEG2_SERIAL        7
-#define OUTMODE_DIVERSITY           4
-#define OUTMODE_MPEG2_FIFO          5
-#define OUTMODE_ANALOG_ADC          6
-
-#define INPUT_MODE_OFF                0x11
-#define INPUT_MODE_DIVERSITY          0x12
-#define INPUT_MODE_MPEG               0x13
-
-enum frontend_tune_state {
-	CT_TUNER_START = 10,
-	CT_TUNER_STEP_0,
-	CT_TUNER_STEP_1,
-	CT_TUNER_STEP_2,
-	CT_TUNER_STEP_3,
-	CT_TUNER_STEP_4,
-	CT_TUNER_STEP_5,
-	CT_TUNER_STEP_6,
-	CT_TUNER_STEP_7,
-	CT_TUNER_STOP,
-
-	CT_AGC_START = 20,
-	CT_AGC_STEP_0,
-	CT_AGC_STEP_1,
-	CT_AGC_STEP_2,
-	CT_AGC_STEP_3,
-	CT_AGC_STEP_4,
-	CT_AGC_STOP,
-
-	CT_DEMOD_START = 30,
-	CT_DEMOD_STEP_1,
-	CT_DEMOD_STEP_2,
-	CT_DEMOD_STEP_3,
-	CT_DEMOD_STEP_4,
-	CT_DEMOD_STEP_5,
-	CT_DEMOD_STEP_6,
-	CT_DEMOD_STEP_7,
-	CT_DEMOD_STEP_8,
-	CT_DEMOD_STEP_9,
-	CT_DEMOD_STEP_10,
-	CT_DEMOD_SEARCH_NEXT = 41,
-	CT_DEMOD_STEP_LOCKED,
-	CT_DEMOD_STOP,
-
-	CT_DONE = 100,
-	CT_SHUTDOWN,
-
-};
-
-struct dvb_frontend_parametersContext {
-#define CHANNEL_STATUS_PARAMETERS_UNKNOWN   0x01
-#define CHANNEL_STATUS_PARAMETERS_SET       0x02
-	u8 status;
-	u32 tune_time_estimation[2];
-	s32 tps_available;
-	u16 tps[9];
-};
-
-#define FE_STATUS_TUNE_FAILED          0
-#define FE_STATUS_TUNE_TIMED_OUT      -1
-#define FE_STATUS_TUNE_TIME_TOO_SHORT -2
-#define FE_STATUS_TUNE_PENDING        -3
-#define FE_STATUS_STD_SUCCESS         -4
-#define FE_STATUS_FFT_SUCCESS         -5
-#define FE_STATUS_DEMOD_SUCCESS       -6
-#define FE_STATUS_LOCKED              -7
-#define FE_STATUS_DATA_LOCKED         -8
-
-#define FE_CALLBACK_TIME_NEVER 0xffffffff
-
-#define ABS(x) ((x < 0) ? (-x) : (x))
-
-#define DATA_BUS_ACCESS_MODE_8BIT                 0x01
-#define DATA_BUS_ACCESS_MODE_16BIT                0x02
-#define DATA_BUS_ACCESS_MODE_NO_ADDRESS_INCREMENT 0x10
-
-struct dibGPIOFunction {
-#define BOARD_GPIO_COMPONENT_BUS_ADAPTER 1
-#define BOARD_GPIO_COMPONENT_DEMOD       2
-	u8 component;
-
-#define BOARD_GPIO_FUNCTION_BOARD_ON      1
-#define BOARD_GPIO_FUNCTION_BOARD_OFF     2
-#define BOARD_GPIO_FUNCTION_COMPONENT_ON  3
-#define BOARD_GPIO_FUNCTION_COMPONENT_OFF 4
-#define BOARD_GPIO_FUNCTION_SUBBAND_PWM   5
-#define BOARD_GPIO_FUNCTION_SUBBAND_GPIO   6
-	u8 function;
-
-/* mask, direction and value are used specify which GPIO to change GPIO0
- * is LSB and possible GPIO31 is MSB.  The same bit-position as in the
- * mask is used for the direction and the value. Direction == 1 is OUT,
- * 0 == IN. For direction "OUT" value is either 1 or 0, for direction IN
- * value has no meaning.
- *
- * In case of BOARD_GPIO_FUNCTION_PWM mask is giving the GPIO to be
- * used to do the PWM. Direction gives the PWModulator to be used.
- * Value gives the PWM value in device-dependent scale.
- */
-	u32 mask;
-	u32 direction;
-	u32 value;
-};
-
-#define MAX_NB_SUBBANDS   8
-struct dibSubbandSelection {
-	u8  size; /* Actual number of subbands. */
-	struct {
-		u16 f_mhz;
-		struct dibGPIOFunction gpio;
-	} subband[MAX_NB_SUBBANDS];
-};
-
-#define DEMOD_TIMF_SET    0x00
-#define DEMOD_TIMF_GET    0x01
-#define DEMOD_TIMF_UPDATE 0x02
-
-#define MPEG_ON_DIBTX		1
-#define DIV_ON_DIBTX		2
-#define ADC_ON_DIBTX		3
-#define DEMOUT_ON_HOSTBUS	4
-#define DIBTX_ON_HOSTBUS	5
-#define MPEG_ON_HOSTBUS		6
-
-#endif