V4L/DVB (13493): TeVii S470 and TBS 6920 fixes

 The new hardware design applied for this cards.
Silicon Labs C8051F300 microcontroller is used for LNB power control.
It connected to cx23885 GPIO pins:
 GPIO0 - P0.3 data
 GPIO1 - P0.2 reset
 GPIO2 - P0.1 clk
 GPIO3 - P0.0 busy
 Tevii S470 based on Montage Technology M88TS2020 digital satellite tuner
and M88DS3000 advanced DVB-S/S2 demodulator.

Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 1367 insertions, 0 deletions

diff --git a/drivers/media/dvb/frontends/ds3000.c b/drivers/media/dvb/frontends/ds3000.c
new file mode 100644
index 00000000000..cff3535566f
--- /dev/null
+++ b/drivers/media/dvb/frontends/ds3000.c
@@ -0,0 +1,1367 @@
+/*
+    Montage Technology DS3000/TS2020 - DVBS/S2 Demodulator/Tuner driver
+    Copyright (C) 2009 Konstantin Dimitrov <kosio.dimitrov@gmail.com>
+
+    Copyright (C) 2009 TurboSight.com
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/firmware.h>
+
+#include "dvb_frontend.h"
+#include "ds3000.h"
+
+static int debug;
+
+#define dprintk(args...) \
+	do { \
+		if (debug) \
+			printk(args); \
+	} while (0)
+
+/* as of March 2009 current DS3000 firmware version is 1.78 */
+/* DS3000 FW v1.78 MD5: a32d17910c4f370073f9346e71d34b80 */
+#define DS3000_DEFAULT_FIRMWARE "dvb-fe-ds3000.fw"
+
+#define DS3000_SAMPLE_RATE 96000 /* in kHz */
+#define DS3000_XTAL_FREQ   27000 /* in kHz */
+
+/* Register values to initialise the demod in DVB-S mode */
+static u8 ds3000_dvbs_init_tab[] = {
+	0x23, 0x05,
+	0x08, 0x03,
+	0x0c, 0x00,
+	0x21, 0x54,
+	0x25, 0x82,
+	0x27, 0x31,
+	0x30, 0x08,
+	0x31, 0x40,
+	0x32, 0x32,
+	0x33, 0x35,
+	0x35, 0xff,
+	0x3a, 0x00,
+	0x37, 0x10,
+	0x38, 0x10,
+	0x39, 0x02,
+	0x42, 0x60,
+	0x4a, 0x40,
+	0x4b, 0x04,
+	0x4d, 0x91,
+	0x5d, 0xc8,
+	0x50, 0x77,
+	0x51, 0x77,
+	0x52, 0x36,
+	0x53, 0x36,
+	0x56, 0x01,
+	0x63, 0x43,
+	0x64, 0x30,
+	0x65, 0x40,
+	0x68, 0x26,
+	0x69, 0x4c,
+	0x70, 0x20,
+	0x71, 0x70,
+	0x72, 0x04,
+	0x73, 0x00,
+	0x70, 0x40,
+	0x71, 0x70,
+	0x72, 0x04,
+	0x73, 0x00,
+	0x70, 0x60,
+	0x71, 0x70,
+	0x72, 0x04,
+	0x73, 0x00,
+	0x70, 0x80,
+	0x71, 0x70,
+	0x72, 0x04,
+	0x73, 0x00,
+	0x70, 0xa0,
+	0x71, 0x70,
+	0x72, 0x04,
+	0x73, 0x00,
+	0x70, 0x1f,
+	0x76, 0x00,
+	0x77, 0xd1,
+	0x78, 0x0c,
+	0x79, 0x80,
+	0x7f, 0x04,
+	0x7c, 0x00,
+	0x80, 0x86,
+	0x81, 0xa6,
+	0x85, 0x04,
+	0xcd, 0xf4,
+	0x90, 0x33,
+	0xa0, 0x44,
+	0xc0, 0x18,
+	0xc3, 0x10,
+	0xc4, 0x08,
+	0xc5, 0x80,
+	0xc6, 0x80,
+	0xc7, 0x0a,
+	0xc8, 0x1a,
+	0xc9, 0x80,
+	0xfe, 0x92,
+	0xe0, 0xf8,
+	0xe6, 0x8b,
+	0xd0, 0x40,
+	0xf8, 0x20,
+	0xfa, 0x0f,
+	0xfd, 0x20,
+	0xad, 0x20,
+	0xae, 0x07,
+	0xb8, 0x00,
+};
+
+/* Register values to initialise the demod in DVB-S2 mode */
+static u8 ds3000_dvbs2_init_tab[] = {
+	0x23, 0x0f,
+	0x08, 0x07,
+	0x0c, 0x00,
+	0x21, 0x54,
+	0x25, 0x82,
+	0x27, 0x31,
+	0x30, 0x08,
+	0x31, 0x32,
+	0x32, 0x32,
+	0x33, 0x35,
+	0x35, 0xff,
+	0x3a, 0x00,
+	0x37, 0x10,
+	0x38, 0x10,
+	0x39, 0x02,
+	0x42, 0x60,
+	0x4a, 0x80,
+	0x4b, 0x04,
+	0x4d, 0x81,
+	0x5d, 0x88,
+	0x50, 0x36,
+	0x51, 0x36,
+	0x52, 0x36,
+	0x53, 0x36,
+	0x63, 0x60,
+	0x64, 0x10,
+	0x65, 0x10,
+	0x68, 0x04,
+	0x69, 0x29,
+	0x70, 0x20,
+	0x71, 0x70,
+	0x72, 0x04,
+	0x73, 0x00,
+	0x70, 0x40,
+	0x71, 0x70,
+	0x72, 0x04,
+	0x73, 0x00,
+	0x70, 0x60,
+	0x71, 0x70,
+	0x72, 0x04,
+	0x73, 0x00,
+	0x70, 0x80,
+	0x71, 0x70,
+	0x72, 0x04,
+	0x73, 0x00,
+	0x70, 0xa0,
+	0x71, 0x70,
+	0x72, 0x04,
+	0x73, 0x00,
+	0x70, 0x1f,
+	0xa0, 0x44,
+	0xc0, 0x08,
+	0xc1, 0x10,
+	0xc2, 0x08,
+	0xc3, 0x10,
+	0xc4, 0x08,
+	0xc5, 0xf0,
+	0xc6, 0xf0,
+	0xc7, 0x0a,
+	0xc8, 0x1a,
+	0xc9, 0x80,
+	0xca, 0x23,
+	0xcb, 0x24,
+	0xce, 0x74,
+	0x90, 0x03,
+	0x76, 0x80,
+	0x77, 0x42,
+	0x78, 0x0a,
+	0x79, 0x80,
+	0xad, 0x40,
+	0xae, 0x07,
+	0x7f, 0xd4,
+	0x7c, 0x00,
+	0x80, 0xa8,
+	0x81, 0xda,
+	0x7c, 0x01,
+	0x80, 0xda,
+	0x81, 0xec,
+	0x7c, 0x02,
+	0x80, 0xca,
+	0x81, 0xeb,
+	0x7c, 0x03,
+	0x80, 0xba,
+	0x81, 0xdb,
+	0x85, 0x08,
+	0x86, 0x00,
+	0x87, 0x02,
+	0x89, 0x80,
+	0x8b, 0x44,
+	0x8c, 0xaa,
+	0x8a, 0x10,
+	0xba, 0x00,
+	0xf5, 0x04,
+	0xfe, 0x44,
+	0xd2, 0x32,
+	0xb8, 0x00,
+};
+
+/* DS3000 doesn't need some parameters as input and auto-detects them */
+/* save input from the application of those parameters */
+struct ds3000_tuning {
+	u32 frequency;
+	u32 symbol_rate;
+	fe_spectral_inversion_t inversion;
+	enum fe_code_rate fec;
+
+	/* input values */
+	u8 inversion_val;
+	fe_modulation_t delivery;
+	u8 rolloff;
+};
+
+struct ds3000_state {
+	struct i2c_adapter *i2c;
+	const struct ds3000_config *config;
+
+	struct dvb_frontend frontend;
+
+	struct ds3000_tuning dcur;
+	struct ds3000_tuning dnxt;
+
+	u8 skip_fw_load;
+
+	/* previous uncorrected block counter for DVB-S2 */
+	u16 prevUCBS2;
+};
+
+static int ds3000_writereg(struct ds3000_state *state, int reg, int data)
+{
+	u8 buf[] = { reg, data };
+	struct i2c_msg msg = { .addr = state->config->demod_address,
+		.flags = 0, .buf = buf, .len = 2 };
+	int err;
+
+	dprintk("%s: write reg 0x%02x, value 0x%02x\n", __func__, reg, data);
+
+	err = i2c_transfer(state->i2c, &msg, 1);
+	if (err != 1) {
+		printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x,"
+			 " value == 0x%02x)\n", __func__, err, reg, data);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int ds3000_tuner_writereg(struct ds3000_state *state, int reg, int data)
+{
+	u8 buf[] = { reg, data };
+	struct i2c_msg msg = { .addr = 0x60,
+		.flags = 0, .buf = buf, .len = 2 };
+	int err;
+
+	dprintk("%s: write reg 0x%02x, value 0x%02x\n", __func__, reg, data);
+
+	ds3000_writereg(state, 0x03, 0x11);
+	err = i2c_transfer(state->i2c, &msg, 1);
+	if (err != 1) {
+		printk("%s: writereg error(err == %i, reg == 0x%02x,"
+			 " value == 0x%02x)\n", __func__, err, reg, data);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+/* I2C write for 8k firmware load */
+static int ds3000_writeFW(struct ds3000_state *state, int reg,
+				const u8 *data, u16 len)
+{
+	int i, ret = -EREMOTEIO;
+	struct i2c_msg msg;
+	u8 *buf;
+
+	buf = kmalloc(3, GFP_KERNEL);
+	if (buf == NULL) {
+		printk(KERN_ERR "Unable to kmalloc\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	*(buf) = reg;
+
+	msg.addr = state->config->demod_address;
+	msg.flags = 0;
+	msg.buf = buf;
+	msg.len = 3;
+
+	for (i = 0; i < len; i += 2) {
+		memcpy(buf + 1, data + i, 2);
+
+		dprintk("%s: write reg 0x%02x, len = %d\n", __func__, reg, len);
+
+		ret = i2c_transfer(state->i2c, &msg, 1);
+		if (ret != 1) {
+			printk(KERN_ERR "%s: write error(err == %i, "
+				"reg == 0x%02x\n", __func__, ret, reg);
+			ret = -EREMOTEIO;
+		}
+	}
+
+error:
+	kfree(buf);
+
+	return ret;
+}
+
+static int ds3000_readreg(struct ds3000_state *state, u8 reg)
+{
+	int ret;
+	u8 b0[] = { reg };
+	u8 b1[] = { 0 };
+	struct i2c_msg msg[] = {
+		{
+			.addr = state->config->demod_address,
+			.flags = 0,
+			.buf = b0,
+			.len = 1
+		}, {
+			.addr = state->config->demod_address,
+			.flags = I2C_M_RD,
+			.buf = b1,
+			.len = 1
+		}
+	};
+
+	ret = i2c_transfer(state->i2c, msg, 2);
+
+	if (ret != 2) {
+		printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret);
+		return ret;
+	}
+
+	dprintk("%s: read reg 0x%02x, value 0x%02x\n", __func__, reg, b1[0]);
+
+	return b1[0];
+}
+
+static int ds3000_tuner_readreg(struct ds3000_state *state, u8 reg)
+{
+	int ret;
+	u8 b0[] = { reg };
+	u8 b1[] = { 0 };
+	struct i2c_msg msg[] = {
+		{
+			.addr = 0x60,
+			.flags = 0,
+			.buf = b0,
+			.len = 1
+		}, {
+			.addr = 0x60,
+			.flags = I2C_M_RD,
+			.buf = b1,
+			.len = 1
+		}
+	};
+
+	ds3000_writereg(state, 0x03, 0x12);
+	ret = i2c_transfer(state->i2c, msg, 2);
+
+	if (ret != 2) {
+		printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret);
+		return ret;
+	}
+
+	dprintk("%s: read reg 0x%02x, value 0x%02x\n", __func__, reg, b1[0]);
+
+	return b1[0];
+}
+
+static int ds3000_set_inversion(struct ds3000_state *state,
+					fe_spectral_inversion_t inversion)
+{
+	dprintk("%s(%d)\n", __func__, inversion);
+
+	switch (inversion) {
+	case INVERSION_OFF:
+	case INVERSION_ON:
+	case INVERSION_AUTO:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	state->dnxt.inversion = inversion;
+
+	return 0;
+}
+
+static int ds3000_set_symbolrate(struct ds3000_state *state, u32 rate)
+{
+	int ret = 0;
+
+	dprintk("%s()\n", __func__);
+
+	dprintk("%s() symbol_rate = %d\n", __func__, state->dnxt.symbol_rate);
+
+	/*  check if symbol rate is within limits */
+	if ((state->dnxt.symbol_rate >
+				state->frontend.ops.info.symbol_rate_max) ||
+	    (state->dnxt.symbol_rate <
+				state->frontend.ops.info.symbol_rate_min))
+		ret = -EOPNOTSUPP;
+
+	state->dnxt.symbol_rate = rate;
+
+	return ret;
+}
+
+static int ds3000_load_firmware(struct dvb_frontend *fe,
+					const struct firmware *fw);
+
+static int ds3000_firmware_ondemand(struct dvb_frontend *fe)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	const struct firmware *fw;
+	int ret = 0;
+
+	dprintk("%s()\n", __func__);
+
+	if (ds3000_readreg(state, 0xb2) <= 0)
+		return ret;
+
+	if (state->skip_fw_load)
+		return 0;
+	/* Load firmware */
+	/* request the firmware, this will block until someone uploads it */
+	printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__,
+				DS3000_DEFAULT_FIRMWARE);
+	ret = request_firmware(&fw, DS3000_DEFAULT_FIRMWARE,
+				state->i2c->dev.parent);
+	printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__);
+	if (ret) {
+		printk(KERN_ERR "%s: No firmware uploaded (timeout or file not "
+				"found?)\n", __func__);
+		return ret;
+	}
+
+	/* Make sure we don't recurse back through here during loading */
+	state->skip_fw_load = 1;
+
+	ret = ds3000_load_firmware(fe, fw);
+	if (ret)
+		printk("%s: Writing firmware to device failed\n", __func__);
+
+	release_firmware(fw);
+
+	dprintk("%s: Firmware upload %s\n", __func__,
+			ret == 0 ? "complete" : "failed");
+
+	/* Ensure firmware is always loaded if required */
+	state->skip_fw_load = 0;
+
+	return ret;
+}
+
+static int ds3000_load_firmware(struct dvb_frontend *fe,
+					const struct firmware *fw)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+
+	dprintk("%s\n", __func__);
+	dprintk("Firmware is %zu bytes (%02x %02x .. %02x %02x)\n",
+			fw->size,
+			fw->data[0],
+			fw->data[1],
+			fw->data[fw->size - 2],
+			fw->data[fw->size - 1]);
+
+	/* Begin the firmware load process */
+	ds3000_writereg(state, 0xb2, 0x01);
+	/* write the entire firmware */
+	ds3000_writeFW(state, 0xb0, fw->data, fw->size);
+	ds3000_writereg(state, 0xb2, 0x00);
+
+	return 0;
+}
+
+static void ds3000_dump_registers(struct dvb_frontend *fe)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	int x, y, reg = 0, val;
+
+	for (y = 0; y < 16; y++) {
+		dprintk("%s: %02x: ", __func__, y);
+		for (x = 0; x < 16; x++) {
+			reg = (y << 4) + x;
+			val = ds3000_readreg(state, reg);
+			if (x != 15)
+				dprintk("%02x ",  val);
+			else
+				dprintk("%02x\n", val);
+		}
+	}
+	dprintk("%s: -- DS3000 DUMP DONE --\n", __func__);
+}
+
+static int ds3000_read_status(struct dvb_frontend *fe, fe_status_t* status)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	int lock;
+
+	*status = 0;
+
+	switch (c->delivery_system) {
+	case SYS_DVBS:
+		lock = ds3000_readreg(state, 0xd1);
+		if ((lock & 0x07) == 0x07)
+			*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
+				FE_HAS_VITERBI | FE_HAS_SYNC |
+				FE_HAS_LOCK;
+
+		break;
+	case SYS_DVBS2:
+		lock = ds3000_readreg(state, 0x0d);
+		if ((lock & 0x8f) == 0x8f)
+			*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
+				FE_HAS_VITERBI | FE_HAS_SYNC |
+				FE_HAS_LOCK;
+
+		break;
+	default:
+		return 1;
+	}
+
+	dprintk("%s: status = 0x%02x\n", __func__, lock);
+
+	return 0;
+}
+
+#define FE_IS_TUNED (FE_HAS_SIGNAL + FE_HAS_LOCK)
+static int ds3000_is_tuned(struct dvb_frontend *fe)
+{
+	fe_status_t tunerstat;
+
+	ds3000_read_status(fe, &tunerstat);
+
+	return ((tunerstat & FE_IS_TUNED) == FE_IS_TUNED);
+}
+
+/* read DS3000 BER value */
+static int ds3000_read_ber(struct dvb_frontend *fe, u32* ber)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u8 data;
+	u32 ber_reading, lpdc_frames;
+
+	dprintk("%s()\n", __func__);
+
+	switch (c->delivery_system) {
+	case SYS_DVBS:
+		/* set the number of bytes checked during
+		BER estimation */
+		ds3000_writereg(state, 0xf9, 0x04);
+		/* read BER estimation status */
+		data = ds3000_readreg(state, 0xf8);
+		/* check if BER estimation is ready */
+		if ((data & 0x10) == 0) {
+			/* this is the number of error bits,
+			to calculate the bit error rate
+			divide to 8388608 */
+			*ber = (ds3000_readreg(state, 0xf7) << 8) |
+				ds3000_readreg(state, 0xf6);
+			/* start counting error bits */
+			/* need to be set twice
+			otherwise it fails sometimes */
+			data |= 0x10;
+			ds3000_writereg(state, 0xf8, data);
+			ds3000_writereg(state, 0xf8, data);
+		} else
+			/* used to indicate that BER estimation
+			is not ready, i.e. BER is unknown */
+			*ber = 0xffffffff;
+		break;
+	case SYS_DVBS2:
+		/* read the number of LPDC decoded frames */
+		lpdc_frames = (ds3000_readreg(state, 0xd7) << 16) |
+				(ds3000_readreg(state, 0xd6) << 8) |
+				ds3000_readreg(state, 0xd5);
+		/* read the number of packets with bad CRC */
+		ber_reading = (ds3000_readreg(state, 0xf8) << 8) |
+				ds3000_readreg(state, 0xf7);
+		if (lpdc_frames > 750) {
+			/* clear LPDC frame counters */
+			ds3000_writereg(state, 0xd1, 0x01);
+			/* clear bad packets counter */
+			ds3000_writereg(state, 0xf9, 0x01);
+			/* enable bad packets counter */
+			ds3000_writereg(state, 0xf9, 0x00);
+			/* enable LPDC frame counters */
+			ds3000_writereg(state, 0xd1, 0x00);
+			*ber = ber_reading;
+		} else
+			/* used to indicate that BER estimation is not ready,
+			i.e. BER is unknown */
+			*ber = 0xffffffff;
+		break;
+	default:
+		return 1;
+	}
+
+	return 0;
+}
+
+/* read TS2020 signal strength */
+static int ds3000_read_signal_strength(struct dvb_frontend *fe,
+						u16 *signal_strength)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	u16 sig_reading, sig_strength;
+	u8 rfgain, bbgain;
+
+	dprintk("%s()\n", __func__);
+
+	rfgain = ds3000_tuner_readreg(state, 0x3d) & 0x1f;
+	bbgain = ds3000_tuner_readreg(state, 0x21) & 0x1f;
+
+	if (rfgain > 15)
+		rfgain = 15;
+	if (bbgain > 13)
+		bbgain = 13;
+
+	sig_reading = rfgain * 2 + bbgain * 3;
+
+	sig_strength = 40 + (64 - sig_reading) * 50 / 64 ;
+
+	/* cook the value to be suitable for szap-s2 human readable output */
+	*signal_strength = sig_strength * 1000;
+
+	dprintk("%s: raw / cooked = 0x%04x / 0x%04x\n", __func__,
+			sig_reading, *signal_strength);
+
+	return 0;
+}
+
+/* calculate DS3000 snr value in dB */
+static int ds3000_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u8 snr_reading, snr_value;
+	u32 dvbs2_signal_reading, dvbs2_noise_reading, tmp;
+	static const u16 dvbs_snr_tab[] = { /* 20 x Table (rounded up) */
+		0x0000, 0x1b13, 0x2aea, 0x3627, 0x3ede, 0x45fe, 0x4c03,
+		0x513a, 0x55d4, 0x59f2, 0x5dab, 0x6111, 0x6431, 0x6717,
+		0x69c9, 0x6c4e, 0x6eac, 0x70e8, 0x7304, 0x7505
+	};
+	static const u16 dvbs2_snr_tab[] = { /* 80 x Table (rounded up) */
+		0x0000, 0x0bc2, 0x12a3, 0x1785, 0x1b4e, 0x1e65, 0x2103,
+		0x2347, 0x2546, 0x2710, 0x28ae, 0x2a28, 0x2b83, 0x2cc5,
+		0x2df1, 0x2f09, 0x3010, 0x3109, 0x31f4, 0x32d2, 0x33a6,
+		0x3470, 0x3531, 0x35ea, 0x369b, 0x3746, 0x37ea, 0x3888,
+		0x3920, 0x39b3, 0x3a42, 0x3acc, 0x3b51, 0x3bd3, 0x3c51,
+		0x3ccb, 0x3d42, 0x3db6, 0x3e27, 0x3e95, 0x3f00, 0x3f68,
+		0x3fcf, 0x4033, 0x4094, 0x40f4, 0x4151, 0x41ac, 0x4206,
+		0x425e, 0x42b4, 0x4308, 0x435b, 0x43ac, 0x43fc, 0x444a,
+		0x4497, 0x44e2, 0x452d, 0x4576, 0x45bd, 0x4604, 0x4649,
+		0x468e, 0x46d1, 0x4713, 0x4755, 0x4795, 0x47d4, 0x4813,
+		0x4851, 0x488d, 0x48c9, 0x4904, 0x493f, 0x4978, 0x49b1,
+		0x49e9, 0x4a20, 0x4a57
+	};
+
+	dprintk("%s()\n", __func__);
+
+	switch (c->delivery_system) {
+	case SYS_DVBS:
+		snr_reading = ds3000_readreg(state, 0xff);
+		snr_reading /= 8;
+		if (snr_reading == 0)
+			*snr = 0x0000;
+		else {
+			if (snr_reading > 20)
+				snr_reading = 20;
+			snr_value = dvbs_snr_tab[snr_reading - 1] * 10 / 23026;
+			/* cook the value to be suitable for szap-s2
+			human readable output */
+			*snr = snr_value * 8 * 655;
+		}
+		dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
+				snr_reading, *snr);
+		break;
+	case SYS_DVBS2:
+		dvbs2_noise_reading = (ds3000_readreg(state, 0x8c) & 0x3f) +
+				(ds3000_readreg(state, 0x8d) << 4);
+		dvbs2_signal_reading = ds3000_readreg(state, 0x8e);
+		tmp = dvbs2_signal_reading * dvbs2_signal_reading >> 1;
+		if (dvbs2_signal_reading == 0) {
+			*snr = 0x0000;
+			return 0;
+		}
+		if (dvbs2_noise_reading == 0) {
+			snr_value = 0x0013;
+			/* cook the value to be suitable for szap-s2
+			human readable output */
+			*snr = 0xffff;
+			return 0;
+		}
+		if (tmp > dvbs2_noise_reading) {
+			snr_reading = tmp / dvbs2_noise_reading;
+			if (snr_reading > 80)
+				snr_reading = 80;
+			snr_value = dvbs2_snr_tab[snr_reading - 1] / 1000;
+			/* cook the value to be suitable for szap-s2
+			human readable output */
+			*snr = snr_value * 5 * 655;
+		} else {
+			snr_reading = dvbs2_noise_reading / tmp;
+			if (snr_reading > 80)
+				snr_reading = 80;
+			*snr = -(dvbs2_snr_tab[snr_reading] / 1000);
+		}
+		dprintk("%s: raw / cooked = 0x%02x / 0x%04x\n", __func__,
+				snr_reading, *snr);
+		break;
+	default:
+		return 1;
+	}
+
+	return 0;
+}
+
+/* read DS3000 uncorrected blocks */
+static int ds3000_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	u8 data;
+	u16 _ucblocks;
+
+	dprintk("%s()\n", __func__);
+
+	switch (c->delivery_system) {
+	case SYS_DVBS:
+		*ucblocks = (ds3000_readreg(state, 0xf5) << 8) |
+				ds3000_readreg(state, 0xf4);
+		data = ds3000_readreg(state, 0xf8);
+		/* clear packet counters */
+		data &= ~0x20;
+		ds3000_writereg(state, 0xf8, data);
+		/* enable packet counters */
+		data |= 0x20;
+		ds3000_writereg(state, 0xf8, data);
+		break;
+	case SYS_DVBS2:
+		_ucblocks = (ds3000_readreg(state, 0xe2) << 8) |
+				ds3000_readreg(state, 0xe1);
+		if (_ucblocks > state->prevUCBS2)
+			*ucblocks = _ucblocks - state->prevUCBS2;
+		else
+			*ucblocks = state->prevUCBS2 - _ucblocks;
+		state->prevUCBS2 = _ucblocks;
+		break;
+	default:
+		return 1;
+	}
+
+	return 0;
+}
+
+/* Overwrite the current tuning params, we are about to tune */
+static void ds3000_clone_params(struct dvb_frontend *fe)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	memcpy(&state->dcur, &state->dnxt, sizeof(state->dcur));
+}
+
+static int ds3000_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	u8 data;
+
+	dprintk("%s(%d)\n", __func__, tone);
+	if ((tone != SEC_TONE_ON) && (tone != SEC_TONE_OFF)) {
+		printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone);
+		return -EINVAL;
+	}
+
+	data = ds3000_readreg(state, 0xa2);
+	data &= ~0xc0;
+	ds3000_writereg(state, 0xa2, data);
+
+	switch (tone) {
+	case SEC_TONE_ON:
+		dprintk("%s: setting tone on\n", __func__);
+		data = ds3000_readreg(state, 0xa1);
+		data &= ~0x43;
+		data |= 0x04;
+		ds3000_writereg(state, 0xa1, data);
+		break;
+	case SEC_TONE_OFF:
+		dprintk("%s: setting tone off\n", __func__);
+		data = ds3000_readreg(state, 0xa2);
+		data |= 0x80;
+		ds3000_writereg(state, 0xa2, data);
+		break;
+	}
+
+	return 0;
+}
+
+static int ds3000_send_diseqc_msg(struct dvb_frontend *fe,
+				struct dvb_diseqc_master_cmd *d)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	int i;
+	u8 data;
+
+	/* Dump DiSEqC message */
+	dprintk("%s(", __func__);
+	for (i = 0 ; i < d->msg_len;) {
+		dprintk("0x%02x", d->msg[i]);
+		if (++i < d->msg_len)
+			dprintk(", ");
+	}
+
+	/* enable DiSEqC message send pin */
+	data = ds3000_readreg(state, 0xa2);
+	data &= ~0xc0;
+	ds3000_writereg(state, 0xa2, data);
+
+	/* DiSEqC message */
+	for (i = 0; i < d->msg_len; i++)
+		ds3000_writereg(state, 0xa3 + i, d->msg[i]);
+
+	data = ds3000_readreg(state, 0xa1);
+	/* clear DiSEqC message length and status,
+	enable DiSEqC message send */
+	data &= ~0xf8;
+	/* set DiSEqC mode, modulation active during 33 pulses,
+	set DiSEqC message length */
+	data |= ((d->msg_len - 1) << 3) | 0x07;
+	ds3000_writereg(state, 0xa1, data);
+
+	/* wait up to 150ms for DiSEqC transmission to complete */
+	for (i = 0; i < 15; i++) {
+		data = ds3000_readreg(state, 0xa1);
+		if ((data & 0x40) == 0)
+			break;
+		msleep(10);
+	}
+
+	/* DiSEqC timeout after 150ms */
+	if (i == 15) {
+		data = ds3000_readreg(state, 0xa1);
+		data &= ~0x80;
+		data |= 0x40;
+		ds3000_writereg(state, 0xa1, data);
+
+		data = ds3000_readreg(state, 0xa2);
+		data &= ~0xc0;
+		data |= 0x80;
+		ds3000_writereg(state, 0xa2, data);
+
+		return 1;
+	}
+
+	data = ds3000_readreg(state, 0xa2);
+	data &= ~0xc0;
+	data |= 0x80;
+	ds3000_writereg(state, 0xa2, data);
+
+	return 0;
+}
+
+/* Send DiSEqC burst */
+static int ds3000_diseqc_send_burst(struct dvb_frontend *fe,
+					fe_sec_mini_cmd_t burst)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	int i;
+	u8 data;
+
+	dprintk("%s()\n", __func__);
+
+	data = ds3000_readreg(state, 0xa2);
+	data &= ~0xc0;
+	ds3000_writereg(state, 0xa2, data);
+
+	/* DiSEqC burst */
+	if (burst == SEC_MINI_A)
+		/* Unmodulated tone burst */
+		ds3000_writereg(state, 0xa1, 0x02);
+	else if (burst == SEC_MINI_B)
+		/* Modulated tone burst */
+		ds3000_writereg(state, 0xa1, 0x01);
+	else
+		return -EINVAL;
+
+	msleep(13);
+	for (i = 0; i < 5; i++) {
+		data = ds3000_readreg(state, 0xa1);
+		if ((data & 0x40) == 0)
+			break;
+		msleep(1);
+	}
+
+	if (i == 5) {
+		data = ds3000_readreg(state, 0xa1);
+		data &= ~0x80;
+		data |= 0x40;
+		ds3000_writereg(state, 0xa1, data);
+
+		data = ds3000_readreg(state, 0xa2);
+		data &= ~0xc0;
+		data |= 0x80;
+		ds3000_writereg(state, 0xa2, data);
+
+		return 1;
+	}
+
+	data = ds3000_readreg(state, 0xa2);
+	data &= ~0xc0;
+	data |= 0x80;
+	ds3000_writereg(state, 0xa2, data);
+
+	return 0;
+}
+
+static void ds3000_release(struct dvb_frontend *fe)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	dprintk("%s\n", __func__);
+	kfree(state);
+}
+
+static struct dvb_frontend_ops ds3000_ops;
+
+struct dvb_frontend *ds3000_attach(const struct ds3000_config *config,
+				    struct i2c_adapter *i2c)
+{
+	struct ds3000_state *state = NULL;
+	int ret;
+
+	dprintk("%s\n", __func__);
+
+	/* allocate memory for the internal state */
+	state = kmalloc(sizeof(struct ds3000_state), GFP_KERNEL);
+	if (state == NULL) {
+		printk(KERN_ERR "Unable to kmalloc\n");
+		goto error2;
+	}
+
+	/* setup the state */
+	memset(state, 0, sizeof(struct ds3000_state));
+
+	state->config = config;
+	state->i2c = i2c;
+	state->prevUCBS2 = 0;
+
+	/* check if the demod is present */
+	ret = ds3000_readreg(state, 0x00) & 0xfe;
+	if (ret != 0xe0) {
+		printk(KERN_ERR "Invalid probe, probably not a DS3000\n");
+		goto error3;
+	}
+
+	printk(KERN_INFO "DS3000 chip version: %d.%d attached.\n",
+			ds3000_readreg(state, 0x02),
+			ds3000_readreg(state, 0x01));
+
+	memcpy(&state->frontend.ops, &ds3000_ops,
+			sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+	return &state->frontend;
+
+error3:
+	kfree(state);
+error2:
+	return NULL;
+}
+EXPORT_SYMBOL(ds3000_attach);
+
+static int ds3000_set_property(struct dvb_frontend *fe,
+	struct dtv_property *tvp)
+{
+	dprintk("%s(..)\n", __func__);
+	return 0;
+}
+
+static int ds3000_get_property(struct dvb_frontend *fe,
+	struct dtv_property *tvp)
+{
+	dprintk("%s(..)\n", __func__);
+	return 0;
+}
+
+static int ds3000_tune(struct dvb_frontend *fe,
+				struct dvb_frontend_parameters *p)
+{
+	struct ds3000_state *state = fe->demodulator_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+	int ret = 0, retune, i;
+	u8 status, mlpf, mlpf_new, mlpf_max, mlpf_min, nlpf;
+	u16 value, ndiv;
+	u32 f3db;
+
+	dprintk("%s() ", __func__);
+
+	/* Load the firmware if required */
+	ret = ds3000_firmware_ondemand(fe);
+	if (ret != 0) {
+		printk(KERN_ERR "%s: Unable initialise the firmware\n",
+								__func__);
+		return ret;
+	}
+
+	state->dnxt.delivery = c->modulation;
+	state->dnxt.frequency = c->frequency;
+	state->dnxt.rolloff = 2; /* fixme */
+	state->dnxt.fec = c->fec_inner;
+
+	ret = ds3000_set_inversion(state, p->inversion);
+	if (ret !=  0)
+		return ret;
+
+	ret = ds3000_set_symbolrate(state, c->symbol_rate);
+	if (ret !=  0)
+		return ret;
+
+	/* discard the 'current' tuning parameters and prepare to tune */
+	ds3000_clone_params(fe);
+
+	retune = 1;	/* try 1 times */
+	dprintk("%s:   retune = %d\n", __func__, retune);
+	dprintk("%s:   frequency   = %d\n", __func__, state->dcur.frequency);
+	dprintk("%s:   symbol_rate = %d\n", __func__, state->dcur.symbol_rate);
+	dprintk("%s:   FEC	 = %d \n", __func__,
+		state->dcur.fec);
+	dprintk("%s:   Inversion   = %d\n", __func__, state->dcur.inversion);
+
+	do {
+		/* Reset status register */
+		status = 0;
+		/* Tune */
+		/* TS2020 init */
+		ds3000_tuner_writereg(state, 0x42, 0x73);
+		ds3000_tuner_writereg(state, 0x05, 0x01);
+		ds3000_tuner_writereg(state, 0x62, 0xf5);
+		/* unknown */
+		ds3000_tuner_writereg(state, 0x07, 0x02);
+		ds3000_tuner_writereg(state, 0x10, 0x00);
+		ds3000_tuner_writereg(state, 0x60, 0x79);
+		ds3000_tuner_writereg(state, 0x08, 0x01);
+		ds3000_tuner_writereg(state, 0x00, 0x01);
+		/* calculate and set freq divider */
+		if (state->dcur.frequency < 1146000) {
+			ds3000_tuner_writereg(state, 0x10, 0x11);
+			ndiv = ((state->dcur.frequency * (6 + 8) * 4) +
+					(DS3000_XTAL_FREQ / 2)) /
+					DS3000_XTAL_FREQ - 1024;
+		} else {
+			ds3000_tuner_writereg(state, 0x10, 0x01);
+			ndiv = ((state->dcur.frequency * (6 + 8) * 2) +
+					(DS3000_XTAL_FREQ / 2)) /
+					DS3000_XTAL_FREQ - 1024;
+		}
+
+		ds3000_tuner_writereg(state, 0x01, (ndiv & 0x0f00) >> 8);
+		ds3000_tuner_writereg(state, 0x02, ndiv & 0x00ff);
+
+		/* set pll */
+		ds3000_tuner_writereg(state, 0x03, 0x06);
+		ds3000_tuner_writereg(state, 0x51, 0x0f);
+		ds3000_tuner_writereg(state, 0x51, 0x1f);
+		ds3000_tuner_writereg(state, 0x50, 0x10);
+		ds3000_tuner_writereg(state, 0x50, 0x00);
+		msleep(5);
+
+		/* unknown */
+		ds3000_tuner_writereg(state, 0x51, 0x17);
+		ds3000_tuner_writereg(state, 0x51, 0x1f);
+		ds3000_tuner_writereg(state, 0x50, 0x08);
+		ds3000_tuner_writereg(state, 0x50, 0x00);
+		msleep(5);
+
+		value = ds3000_tuner_readreg(state, 0x3d);
+		value &= 0x0f;
+		if ((value > 4) && (value < 15)) {
+			value -= 3;
+			if (value < 4)
+				value = 4;
+			value = ((value << 3) | 0x01) & 0x79;
+		}
+
+		ds3000_tuner_writereg(state, 0x60, value);
+		ds3000_tuner_writereg(state, 0x51, 0x17);
+		ds3000_tuner_writereg(state, 0x51, 0x1f);
+		ds3000_tuner_writereg(state, 0x50, 0x08);
+		ds3000_tuner_writereg(state, 0x50, 0x00);
+
+		/* set low-pass filter period */
+		ds3000_tuner_writereg(state, 0x04, 0x2e);
+		ds3000_tuner_writereg(state, 0x51, 0x1b);
+		ds3000_tuner_writereg(state, 0x51, 0x1f);
+		ds3000_tuner_writereg(state, 0x50, 0x04);
+		ds3000_tuner_writereg(state, 0x50, 0x00);
+		msleep(5);
+
+		f3db = ((state->dcur.symbol_rate / 1000) << 2) / 5 + 2000;
+		if ((state->dcur.symbol_rate / 1000) < 5000)
+			f3db += 3000;
+		if (f3db < 7000)
+			f3db = 7000;
+		if (f3db > 40000)
+			f3db = 40000;
+
+		/* set low-pass filter baseband */
+		value = ds3000_tuner_readreg(state, 0x26);
+		mlpf = 0x2e * 207 / ((value << 1) + 151);
+		mlpf_max = mlpf * 135 / 100;
+		mlpf_min = mlpf * 78 / 100;
+		if (mlpf_max > 63)
+			mlpf_max = 63;
+
+		/* rounded to the closest integer */
+		nlpf = ((mlpf * f3db * 1000) + (2766 * DS3000_XTAL_FREQ / 2))
+				/ (2766 * DS3000_XTAL_FREQ);
+		if (nlpf > 23)
+			nlpf = 23;
+		if (nlpf < 1)
+			nlpf = 1;
+
+		/* rounded to the closest integer */
+		mlpf_new = ((DS3000_XTAL_FREQ * nlpf * 2766) +
+				(1000 * f3db / 2)) / (1000 * f3db);
+
+		if (mlpf_new < mlpf_min) {
+			nlpf++;
+			mlpf_new = ((DS3000_XTAL_FREQ * nlpf * 2766) +
+					(1000 * f3db / 2)) / (1000 * f3db);
+		}
+
+		if (mlpf_new > mlpf_max)
+			mlpf_new = mlpf_max;
+
+		ds3000_tuner_writereg(state, 0x04, mlpf_new);
+		ds3000_tuner_writereg(state, 0x06, nlpf);
+		ds3000_tuner_writereg(state, 0x51, 0x1b);
+		ds3000_tuner_writereg(state, 0x51, 0x1f);
+		ds3000_tuner_writereg(state, 0x50, 0x04);
+		ds3000_tuner_writereg(state, 0x50, 0x00);
+		msleep(5);
+
+		/* unknown */
+		ds3000_tuner_writereg(state, 0x51, 0x1e);
+		ds3000_tuner_writereg(state, 0x51, 0x1f);
+		ds3000_tuner_writereg(state, 0x50, 0x01);
+		ds3000_tuner_writereg(state, 0x50, 0x00);
+		msleep(60);
+
+		/* ds3000 global reset */
+		ds3000_writereg(state, 0x07, 0x80);
+		ds3000_writereg(state, 0x07, 0x00);
+		/* ds3000 build-in uC reset */
+		ds3000_writereg(state, 0xb2, 0x01);
+		/* ds3000 software reset */
+		ds3000_writereg(state, 0x00, 0x01);
+
+		switch (c->delivery_system) {
+		case SYS_DVBS:
+			/* initialise the demod in DVB-S mode */
+			for (i = 0; i < sizeof(ds3000_dvbs_init_tab); i += 2)
+				ds3000_writereg(state,
+					ds3000_dvbs_init_tab[i],
+					ds3000_dvbs_init_tab[i + 1]);
+			value = ds3000_readreg(state, 0xfe);
+			value &= 0xc0;
+			value |= 0x1b;
+			ds3000_writereg(state, 0xfe, value);
+			break;
+		case SYS_DVBS2:
+			/* initialise the demod in DVB-S2 mode */
+			for (i = 0; i < sizeof(ds3000_dvbs2_init_tab); i += 2)
+				ds3000_writereg(state,
+					ds3000_dvbs2_init_tab[i],
+					ds3000_dvbs2_init_tab[i + 1]);
+			ds3000_writereg(state, 0xfe, 0x54);
+			break;
+		default:
+			return 1;
+		}
+
+		/* enable 27MHz clock output */
+		ds3000_writereg(state, 0x29, 0x80);
+		/* enable ac coupling */
+		ds3000_writereg(state, 0x25, 0x8a);
+
+		/* enhance symbol rate performance */
+		if ((state->dcur.symbol_rate / 1000) <= 5000) {
+			value = 29777 / (state->dcur.symbol_rate / 1000) + 1;
+			if (value % 2 != 0)
+				value++;
+			ds3000_writereg(state, 0xc3, 0x0d);
+			ds3000_writereg(state, 0xc8, value);
+			ds3000_writereg(state, 0xc4, 0x10);
+			ds3000_writereg(state, 0xc7, 0x0e);
+		} else if ((state->dcur.symbol_rate / 1000) <= 10000) {
+			value = 92166 / (state->dcur.symbol_rate / 1000) + 1;
+			if (value % 2 != 0)
+				value++;
+			ds3000_writereg(state, 0xc3, 0x07);
+			ds3000_writereg(state, 0xc8, value);
+			ds3000_writereg(state, 0xc4, 0x09);
+			ds3000_writereg(state, 0xc7, 0x12);
+		} else if ((state->dcur.symbol_rate / 1000) <= 20000) {
+			value = 64516 / (state->dcur.symbol_rate / 1000) + 1;
+			ds3000_writereg(state, 0xc3, value);
+			ds3000_writereg(state, 0xc8, 0x0e);
+			ds3000_writereg(state, 0xc4, 0x07);
+			ds3000_writereg(state, 0xc7, 0x18);
+		} else {
+			value = 129032 / (state->dcur.symbol_rate / 1000) + 1;
+			ds3000_writereg(state, 0xc3, value);
+			ds3000_writereg(state, 0xc8, 0x0a);
+			ds3000_writereg(state, 0xc4, 0x05);
+			ds3000_writereg(state, 0xc7, 0x24);
+		}
+
+		/* normalized symbol rate rounded to the closest integer */
+		value = (((state->dcur.symbol_rate / 1000) << 16) +
+				(DS3000_SAMPLE_RATE / 2)) / DS3000_SAMPLE_RATE;
+		ds3000_writereg(state, 0x61, value & 0x00ff);
+		ds3000_writereg(state, 0x62, (value & 0xff00) >> 8);
+
+		/* co-channel interference cancellation disabled */
+		ds3000_writereg(state, 0x56, 0x00);
+
+		/* equalizer disabled */
+		ds3000_writereg(state, 0x76, 0x00);
+
+		/*ds3000_writereg(state, 0x08, 0x03);
+		ds3000_writereg(state, 0xfd, 0x22);
+		ds3000_writereg(state, 0x08, 0x07);
+		ds3000_writereg(state, 0xfd, 0x42);
+		ds3000_writereg(state, 0x08, 0x07);*/
+
+		/* ds3000 out of software reset */
+		ds3000_writereg(state, 0x00, 0x00);
+		/* start ds3000 build-in uC */
+		ds3000_writereg(state, 0xb2, 0x00);
+
+		/* TODO: calculate and set carrier offset */
+
+		/* wait before retrying */
+		for (i = 0; i < 30 ; i++) {
+			if (ds3000_is_tuned(fe)) {
+				dprintk("%s: Tuned\n", __func__);
+				ds3000_dump_registers(fe);
+				goto tuned;
+			}
+			msleep(1);
+		}
+
+		dprintk("%s: Not tuned\n", __func__);
+		ds3000_dump_registers(fe);
+
+	} while (--retune);
+
+tuned:
+	return ret;
+}
+
+static enum dvbfe_algo ds3000_get_algo(struct dvb_frontend *fe)
+{
+	dprintk("%s()\n", __func__);
+	return DVBFE_ALGO_SW;
+}
+
+/*
+ * Initialise or wake up device
+ *
+ * Power config will reset and load initial firmware if required
+ */
+static int ds3000_initfe(struct dvb_frontend *fe)
+{
+	dprintk("%s()\n", __func__);
+	return 0;
+}
+
+/* Put device to sleep */
+static int ds3000_sleep(struct dvb_frontend *fe)
+{
+	dprintk("%s()\n", __func__);
+	return 0;
+}
+
+static struct dvb_frontend_ops ds3000_ops = {
+
+	.info = {
+		.name = "Montage Technology DS3000/TS2020",
+		.type = FE_QPSK,
+		.frequency_min = 950000,
+		.frequency_max = 2150000,
+		.frequency_stepsize = 1011, /* kHz for QPSK frontends */
+		.frequency_tolerance = 5000,
+		.symbol_rate_min = 1000000,
+		.symbol_rate_max = 45000000,
+		.caps = FE_CAN_INVERSION_AUTO |
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 |
+			FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_2G_MODULATION |
+			FE_CAN_QPSK | FE_CAN_RECOVER
+	},
+
+	.release = ds3000_release,
+
+	.init = ds3000_initfe,
+	.sleep = ds3000_sleep,
+	.read_status = ds3000_read_status,
+	.read_ber = ds3000_read_ber,
+	.read_signal_strength = ds3000_read_signal_strength,
+	.read_snr = ds3000_read_snr,
+	.read_ucblocks = ds3000_read_ucblocks,
+	.set_tone = ds3000_set_tone,
+	.diseqc_send_master_cmd = ds3000_send_diseqc_msg,
+	.diseqc_send_burst = ds3000_diseqc_send_burst,
+	.get_frontend_algo = ds3000_get_algo,
+
+	.set_property = ds3000_set_property,
+	.get_property = ds3000_get_property,
+	.set_frontend = ds3000_tune,
+};
+
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+MODULE_DESCRIPTION("DVB Frontend module for Montage Technology "
+			"DS3000/TS2020 hardware");
+MODULE_AUTHOR("Konstantin Dimitrov");
+MODULE_LICENSE("GPL");