[media] move the dvb/frontends to drivers/media/dvb-frontends

Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 629 deletions

diff --git a/drivers/media/dvb/frontends/sp887x.c b/drivers/media/dvb/frontends/sp887x.c
deleted file mode 100644
index f4096ccb226..00000000000
--- a/drivers/media/dvb/frontends/sp887x.c
+++ /dev/null
@@ -1,629 +0,0 @@
-/*
-   Driver for the Spase sp887x demodulator
-*/
-
-/*
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware sp887x" to
- * download/extract it, and then copy it to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define SP887X_DEFAULT_FIRMWARE "dvb-fe-sp887x.fw"
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "sp887x.h"
-
-
-struct sp887x_state {
-	struct i2c_adapter* i2c;
-	const struct sp887x_config* config;
-	struct dvb_frontend frontend;
-
-	/* demodulator private data */
-	u8 initialised:1;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "sp887x: " args); \
-	} while (0)
-
-static int i2c_writebytes (struct sp887x_state* state, u8 *buf, u8 len)
-{
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = len };
-	int err;
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		printk ("%s: i2c write error (addr %02x, err == %i)\n",
-			__func__, state->config->demod_address, err);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data)
-{
-	u8 b0 [] = { reg >> 8 , reg & 0xff, data >> 8, data & 0xff };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 4 };
-	int ret;
-
-	if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) {
-		/**
-		 *  in case of soft reset we ignore ACK errors...
-		 */
-		if (!(reg == 0xf1a && data == 0x000 &&
-			(ret == -EREMOTEIO || ret == -EFAULT)))
-		{
-			printk("%s: writereg error "
-			       "(reg %03x, data %03x, ret == %i)\n",
-			       __func__, reg & 0xffff, data & 0xffff, ret);
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static int sp887x_readreg (struct sp887x_state* state, u16 reg)
-{
-	u8 b0 [] = { reg >> 8 , reg & 0xff };
-	u8 b1 [2];
-	int ret;
-	struct i2c_msg msg[] = {{ .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
-			 { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 }};
-
-	if ((ret = i2c_transfer(state->i2c, msg, 2)) != 2) {
-		printk("%s: readreg error (ret == %i)\n", __func__, ret);
-		return -1;
-	}
-
-	return (((b1[0] << 8) | b1[1]) & 0xfff);
-}
-
-static void sp887x_microcontroller_stop (struct sp887x_state* state)
-{
-	dprintk("%s\n", __func__);
-	sp887x_writereg(state, 0xf08, 0x000);
-	sp887x_writereg(state, 0xf09, 0x000);
-
-	/* microcontroller STOP */
-	sp887x_writereg(state, 0xf00, 0x000);
-}
-
-static void sp887x_microcontroller_start (struct sp887x_state* state)
-{
-	dprintk("%s\n", __func__);
-	sp887x_writereg(state, 0xf08, 0x000);
-	sp887x_writereg(state, 0xf09, 0x000);
-
-	/* microcontroller START */
-	sp887x_writereg(state, 0xf00, 0x001);
-}
-
-static void sp887x_setup_agc (struct sp887x_state* state)
-{
-	/* setup AGC parameters */
-	dprintk("%s\n", __func__);
-	sp887x_writereg(state, 0x33c, 0x054);
-	sp887x_writereg(state, 0x33b, 0x04c);
-	sp887x_writereg(state, 0x328, 0x000);
-	sp887x_writereg(state, 0x327, 0x005);
-	sp887x_writereg(state, 0x326, 0x001);
-	sp887x_writereg(state, 0x325, 0x001);
-	sp887x_writereg(state, 0x324, 0x001);
-	sp887x_writereg(state, 0x318, 0x050);
-	sp887x_writereg(state, 0x317, 0x3fe);
-	sp887x_writereg(state, 0x316, 0x001);
-	sp887x_writereg(state, 0x313, 0x005);
-	sp887x_writereg(state, 0x312, 0x002);
-	sp887x_writereg(state, 0x306, 0x000);
-	sp887x_writereg(state, 0x303, 0x000);
-}
-
-#define BLOCKSIZE 30
-#define FW_SIZE 0x4000
-/**
- *  load firmware and setup MPEG interface...
- */
-static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-	u8 buf [BLOCKSIZE+2];
-	int i;
-	int fw_size = fw->size;
-	const unsigned char *mem = fw->data;
-
-	dprintk("%s\n", __func__);
-
-	/* ignore the first 10 bytes, then we expect 0x4000 bytes of firmware */
-	if (fw_size < FW_SIZE+10)
-		return -ENODEV;
-
-	mem = fw->data + 10;
-
-	/* soft reset */
-	sp887x_writereg(state, 0xf1a, 0x000);
-
-	sp887x_microcontroller_stop (state);
-
-	printk ("%s: firmware upload... ", __func__);
-
-	/* setup write pointer to -1 (end of memory) */
-	/* bit 0x8000 in address is set to enable 13bit mode */
-	sp887x_writereg(state, 0x8f08, 0x1fff);
-
-	/* dummy write (wrap around to start of memory) */
-	sp887x_writereg(state, 0x8f0a, 0x0000);
-
-	for (i = 0; i < FW_SIZE; i += BLOCKSIZE) {
-		int c = BLOCKSIZE;
-		int err;
-
-		if (i+c > FW_SIZE)
-			c = FW_SIZE - i;
-
-		/* bit 0x8000 in address is set to enable 13bit mode */
-		/* bit 0x4000 enables multibyte read/write transfers */
-		/* write register is 0xf0a */
-		buf[0] = 0xcf;
-		buf[1] = 0x0a;
-
-		memcpy(&buf[2], mem + i, c);
-
-		if ((err = i2c_writebytes (state, buf, c+2)) < 0) {
-			printk ("failed.\n");
-			printk ("%s: i2c error (err == %i)\n", __func__, err);
-			return err;
-		}
-	}
-
-	/* don't write RS bytes between packets */
-	sp887x_writereg(state, 0xc13, 0x001);
-
-	/* suppress clock if (!data_valid) */
-	sp887x_writereg(state, 0xc14, 0x000);
-
-	/* setup MPEG interface... */
-	sp887x_writereg(state, 0xc1a, 0x872);
-	sp887x_writereg(state, 0xc1b, 0x001);
-	sp887x_writereg(state, 0xc1c, 0x000); /* parallel mode (serial mode == 1) */
-	sp887x_writereg(state, 0xc1a, 0x871);
-
-	/* ADC mode, 2 for MT8872, 3 for SP8870/SP8871 */
-	sp887x_writereg(state, 0x301, 0x002);
-
-	sp887x_setup_agc(state);
-
-	/* bit 0x010: enable data valid signal */
-	sp887x_writereg(state, 0xd00, 0x010);
-	sp887x_writereg(state, 0x0d1, 0x000);
-	return 0;
-};
-
-static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05)
-{
-	int known_parameters = 1;
-
-	*reg0xc05 = 0x000;
-
-	switch (p->modulation) {
-	case QPSK:
-		break;
-	case QAM_16:
-		*reg0xc05 |= (1 << 10);
-		break;
-	case QAM_64:
-		*reg0xc05 |= (2 << 10);
-		break;
-	case QAM_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	switch (p->hierarchy) {
-	case HIERARCHY_NONE:
-		break;
-	case HIERARCHY_1:
-		*reg0xc05 |= (1 << 7);
-		break;
-	case HIERARCHY_2:
-		*reg0xc05 |= (2 << 7);
-		break;
-	case HIERARCHY_4:
-		*reg0xc05 |= (3 << 7);
-		break;
-	case HIERARCHY_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	switch (p->code_rate_HP) {
-	case FEC_1_2:
-		break;
-	case FEC_2_3:
-		*reg0xc05 |= (1 << 3);
-		break;
-	case FEC_3_4:
-		*reg0xc05 |= (2 << 3);
-		break;
-	case FEC_5_6:
-		*reg0xc05 |= (3 << 3);
-		break;
-	case FEC_7_8:
-		*reg0xc05 |= (4 << 3);
-		break;
-	case FEC_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	if (known_parameters)
-		*reg0xc05 |= (2 << 1);	/* use specified parameters */
-	else
-		*reg0xc05 |= (1 << 1);	/* enable autoprobing */
-
-	return 0;
-}
-
-/**
- *  estimates division of two 24bit numbers,
- *  derived from the ves1820/stv0299 driver code
- */
-static void divide (int n, int d, int *quotient_i, int *quotient_f)
-{
-	unsigned int q, r;
-
-	r = (n % d) << 8;
-	q = (r / d);
-
-	if (quotient_i)
-		*quotient_i = q;
-
-	if (quotient_f) {
-		r = (r % d) << 8;
-		q = (q << 8) | (r / d);
-		r = (r % d) << 8;
-		*quotient_f = (q << 8) | (r / d);
-	}
-}
-
-static void sp887x_correct_offsets (struct sp887x_state* state,
-				    struct dtv_frontend_properties *p,
-				    int actual_freq)
-{
-	static const u32 srate_correction [] = { 1879617, 4544878, 8098561 };
-	int bw_index;
-	int freq_offset = actual_freq - p->frequency;
-	int sysclock = 61003; //[kHz]
-	int ifreq = 36000000;
-	int freq;
-	int frequency_shift;
-
-	switch (p->bandwidth_hz) {
-	default:
-	case 8000000:
-		bw_index = 0;
-		break;
-	case 7000000:
-		bw_index = 1;
-		break;
-	case 6000000:
-		bw_index = 2;
-		break;
-	}
-
-	if (p->inversion == INVERSION_ON)
-		freq = ifreq - freq_offset;
-	else
-		freq = ifreq + freq_offset;
-
-	divide(freq / 333, sysclock, NULL, &frequency_shift);
-
-	if (p->inversion == INVERSION_ON)
-		frequency_shift = -frequency_shift;
-
-	/* sample rate correction */
-	sp887x_writereg(state, 0x319, srate_correction[bw_index] >> 12);
-	sp887x_writereg(state, 0x31a, srate_correction[bw_index] & 0xfff);
-
-	/* carrier offset correction */
-	sp887x_writereg(state, 0x309, frequency_shift >> 12);
-	sp887x_writereg(state, 0x30a, frequency_shift & 0xfff);
-}
-
-static int sp887x_setup_frontend_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct sp887x_state* state = fe->demodulator_priv;
-	unsigned actual_freq;
-	int err;
-	u16 val, reg0xc05;
-
-	if (p->bandwidth_hz != 8000000 &&
-	    p->bandwidth_hz != 7000000 &&
-	    p->bandwidth_hz != 6000000)
-		return -EINVAL;
-
-	if ((err = configure_reg0xc05(p, &reg0xc05)))
-		return err;
-
-	sp887x_microcontroller_stop(state);
-
-	/* setup the PLL */
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-	if (fe->ops.tuner_ops.get_frequency) {
-		fe->ops.tuner_ops.get_frequency(fe, &actual_freq);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	} else {
-		actual_freq = p->frequency;
-	}
-
-	/* read status reg in order to clear <pending irqs */
-	sp887x_readreg(state, 0x200);
-
-	sp887x_correct_offsets(state, p, actual_freq);
-
-	/* filter for 6/7/8 Mhz channel */
-	if (p->bandwidth_hz == 6000000)
-		val = 2;
-	else if (p->bandwidth_hz == 7000000)
-		val = 1;
-	else
-		val = 0;
-
-	sp887x_writereg(state, 0x311, val);
-
-	/* scan order: 2k first = 0, 8k first = 1 */
-	if (p->transmission_mode == TRANSMISSION_MODE_2K)
-		sp887x_writereg(state, 0x338, 0x000);
-	else
-		sp887x_writereg(state, 0x338, 0x001);
-
-	sp887x_writereg(state, 0xc05, reg0xc05);
-
-	if (p->bandwidth_hz == 6000000)
-		val = 2 << 3;
-	else if (p->bandwidth_hz == 7000000)
-		val = 3 << 3;
-	else
-		val = 0 << 3;
-
-	/* enable OFDM and SAW bits as lock indicators in sync register 0xf17,
-	 * optimize algorithm for given bandwidth...
-	 */
-	sp887x_writereg(state, 0xf14, 0x160 | val);
-	sp887x_writereg(state, 0xf15, 0x000);
-
-	sp887x_microcontroller_start(state);
-	return 0;
-}
-
-static int sp887x_read_status(struct dvb_frontend* fe, fe_status_t* status)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-	u16 snr12 = sp887x_readreg(state, 0xf16);
-	u16 sync0x200 = sp887x_readreg(state, 0x200);
-	u16 sync0xf17 = sp887x_readreg(state, 0xf17);
-
-	*status = 0;
-
-	if (snr12 > 0x00f)
-		*status |= FE_HAS_SIGNAL;
-
-	//if (sync0x200 & 0x004)
-	//	*status |= FE_HAS_SYNC | FE_HAS_CARRIER;
-
-	//if (sync0x200 & 0x008)
-	//	*status |= FE_HAS_VITERBI;
-
-	if ((sync0xf17 & 0x00f) == 0x002) {
-		*status |= FE_HAS_LOCK;
-		*status |= FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_CARRIER;
-	}
-
-	if (sync0x200 & 0x001) {	/* tuner adjustment requested...*/
-		int steps = (sync0x200 >> 4) & 0x00f;
-		if (steps & 0x008)
-			steps = -steps;
-		dprintk("sp887x: implement tuner adjustment (%+i steps)!!\n",
-		       steps);
-	}
-
-	return 0;
-}
-
-static int sp887x_read_ber(struct dvb_frontend* fe, u32* ber)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	*ber = (sp887x_readreg(state, 0xc08) & 0x3f) |
-	       (sp887x_readreg(state, 0xc07) << 6);
-	sp887x_writereg(state, 0xc08, 0x000);
-	sp887x_writereg(state, 0xc07, 0x000);
-	if (*ber >= 0x3fff0)
-		*ber = ~0;
-
-	return 0;
-}
-
-static int sp887x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	u16 snr12 = sp887x_readreg(state, 0xf16);
-	u32 signal = 3 * (snr12 << 4);
-	*strength = (signal < 0xffff) ? signal : 0xffff;
-
-	return 0;
-}
-
-static int sp887x_read_snr(struct dvb_frontend* fe, u16* snr)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	u16 snr12 = sp887x_readreg(state, 0xf16);
-	*snr = (snr12 << 4) | (snr12 >> 8);
-
-	return 0;
-}
-
-static int sp887x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	*ucblocks = sp887x_readreg(state, 0xc0c);
-	if (*ucblocks == 0xfff)
-		*ucblocks = ~0;
-
-	return 0;
-}
-
-static int sp887x_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	if (enable) {
-		return sp887x_writereg(state, 0x206, 0x001);
-	} else {
-		return sp887x_writereg(state, 0x206, 0x000);
-	}
-}
-
-static int sp887x_sleep(struct dvb_frontend* fe)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-
-	/* tristate TS output and disable interface pins */
-	sp887x_writereg(state, 0xc18, 0x000);
-
-	return 0;
-}
-
-static int sp887x_init(struct dvb_frontend* fe)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-	const struct firmware *fw = NULL;
-	int ret;
-
-	if (!state->initialised) {
-		/* request the firmware, this will block until someone uploads it */
-		printk("sp887x: waiting for firmware upload (%s)...\n", SP887X_DEFAULT_FIRMWARE);
-		ret = state->config->request_firmware(fe, &fw, SP887X_DEFAULT_FIRMWARE);
-		if (ret) {
-			printk("sp887x: no firmware upload (timeout or file not found?)\n");
-			return ret;
-		}
-
-		ret = sp887x_initial_setup(fe, fw);
-		release_firmware(fw);
-		if (ret) {
-			printk("sp887x: writing firmware to device failed\n");
-			return ret;
-		}
-		printk("sp887x: firmware upload complete\n");
-		state->initialised = 1;
-	}
-
-	/* enable TS output and interface pins */
-	sp887x_writereg(state, 0xc18, 0x00d);
-
-	return 0;
-}
-
-static int sp887x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-	fesettings->min_delay_ms = 350;
-	fesettings->step_size = 166666*2;
-	fesettings->max_drift = (166666*2)+1;
-	return 0;
-}
-
-static void sp887x_release(struct dvb_frontend* fe)
-{
-	struct sp887x_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops sp887x_ops;
-
-struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
-				   struct i2c_adapter* i2c)
-{
-	struct sp887x_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct sp887x_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->initialised = 0;
-
-	/* check if the demod is there */
-	if (sp887x_readreg(state, 0x0200) < 0) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &sp887x_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops sp887x_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name = "Spase SP887x DVB-T",
-		.frequency_min =  50500000,
-		.frequency_max = 858000000,
-		.frequency_stepsize = 166666,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
-			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
-			FE_CAN_RECOVER
-	},
-
-	.release = sp887x_release,
-
-	.init = sp887x_init,
-	.sleep = sp887x_sleep,
-	.i2c_gate_ctrl = sp887x_i2c_gate_ctrl,
-
-	.set_frontend = sp887x_setup_frontend_parameters,
-	.get_tune_settings = sp887x_get_tune_settings,
-
-	.read_status = sp887x_read_status,
-	.read_ber = sp887x_read_ber,
-	.read_signal_strength = sp887x_read_signal_strength,
-	.read_snr = sp887x_read_snr,
-	.read_ucblocks = sp887x_read_ucblocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Spase sp887x DVB-T demodulator driver");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sp887x_attach);