Merge branch 'master'

15 files changed, 914 insertions, 16 deletions

diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index c676b1e23ab..94233168d24 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -116,6 +116,12 @@ config DVB_MT352
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
+config DVB_ZL10353
+	tristate "Zarlink ZL10353 based"
+	depends on DVB_CORE
+	help
+	  A DVB-T tuner module. Say Y when you want to support this frontend.
+
 config DVB_DIB3000MB
 	tristate "DiBcom 3000M-B"
 	depends on DVB_CORE
@@ -155,7 +161,7 @@ comment "ATSC (North American/Korean Terresterial DTV) frontends"
 	depends on DVB_CORE
 
 config DVB_NXT200X
-	tristate "Nextwave NXT2002/NXT2004 based"
+	tristate "NxtWave Communications NXT2002/NXT2004 based"
 	depends on DVB_CORE
 	select FW_LOADER
 	help
@@ -169,14 +175,14 @@ config DVB_NXT200X
 	  or /lib/firmware (depending on configuration of firmware hotplug).
 
 config DVB_OR51211
-	tristate "or51211 based (pcHDTV HD2000 card)"
+	tristate "Oren OR51211 based"
 	depends on DVB_CORE
 	select FW_LOADER
 	help
 	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
 
 config DVB_OR51132
-	tristate "OR51132 based (pcHDTV HD3000 card)"
+	tristate "Oren OR51132 based"
 	depends on DVB_CORE
 	select FW_LOADER
 	help
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 1af769cd90c..d09b6071fba 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_DVB_TDA1004X) += tda1004x.o
 obj-$(CONFIG_DVB_SP887X) += sp887x.o
 obj-$(CONFIG_DVB_NXT6000) += nxt6000.o
 obj-$(CONFIG_DVB_MT352) += mt352.o
+obj-$(CONFIG_DVB_ZL10353) += zl10353.o
 obj-$(CONFIG_DVB_CX22702) += cx22702.o
 obj-$(CONFIG_DVB_TDA10021) += tda10021.o
 obj-$(CONFIG_DVB_STV0297) += stv0297.o
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index caaee893ca7..1708a1d4893 100644
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -39,6 +39,7 @@
 #include <linux/jiffies.h>
 #include <linux/string.h>
 #include <linux/slab.h>
+#include <linux/mutex.h>
 
 #include "dvb_frontend.h"
 #include "bcm3510.h"
@@ -52,7 +53,7 @@ struct bcm3510_state {
 	struct dvb_frontend frontend;
 
 	/* demodulator private data */
-	struct semaphore hab_sem;
+	struct mutex hab_mutex;
 	u8 firmware_loaded:1;
 
 	unsigned long next_status_check;
@@ -213,7 +214,7 @@ static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *ob
 	dbufout(ob,olen+2,deb_hab);
 	deb_hab("\n");
 
-	if (down_interruptible(&st->hab_sem) < 0)
+	if (mutex_lock_interruptible(&st->hab_mutex) < 0)
 		return -EAGAIN;
 
 	if ((ret = bcm3510_hab_send_request(st, ob, olen+2)) < 0 ||
@@ -226,7 +227,7 @@ static int bcm3510_do_hab_cmd(struct bcm3510_state *st, u8 cmd, u8 msgid, u8 *ob
 
 	memcpy(ibuf,&ib[2],ilen);
 error:
-	up(&st->hab_sem);
+	mutex_unlock(&st->hab_mutex);
 	return ret;
 }
 
@@ -796,7 +797,7 @@ struct dvb_frontend* bcm3510_attach(const struct bcm3510_config *config,
 	state->frontend.ops = &state->ops;
 	state->frontend.demodulator_priv = state;
 
-	sema_init(&state->hab_sem, 1);
+	mutex_init(&state->hab_mutex);
 
 	if ((ret = bcm3510_readB(state,0xe0,&v)) < 0)
 		goto error;
diff --git a/drivers/media/dvb/frontends/bsbe1.h b/drivers/media/dvb/frontends/bsbe1.h
new file mode 100644
index 00000000000..78573b22ada
--- /dev/null
+++ b/drivers/media/dvb/frontends/bsbe1.h
@@ -0,0 +1,123 @@
+/*
+ * bsbe1.h - ALPS BSBE1 tuner support (moved from av7110.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+
+#ifndef BSBE1_H
+#define BSBE1_H
+
+static u8 alps_bsbe1_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x30,
+	0x03, 0x00,
+	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+	0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
+	0x06, 0x40,   /* DAC not used, set to high impendance mode */
+	0x07, 0x00,   /* DAC LSB */
+	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
+	0x09, 0x00,   /* FIFO */
+	0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+	0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */
+	0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */
+	0x10, 0x3f,   // AGC2  0x3d
+	0x11, 0x84,
+	0x12, 0xb9,
+	0x15, 0xc9,   // lock detector threshold
+	0x16, 0x00,
+	0x17, 0x00,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1a, 0x00,
+	0x1f, 0x50,
+	0x20, 0x00,
+	0x21, 0x00,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,  // out imp: normal  out type: parallel FEC mode:0
+	0x29, 0x1e,  // 1/2 threshold
+	0x2a, 0x14,  // 2/3 threshold
+	0x2b, 0x0f,  // 3/4 threshold
+	0x2c, 0x09,  // 5/6 threshold
+	0x2d, 0x05,  // 7/8 threshold
+	0x2e, 0x01,
+	0x31, 0x1f,  // test all FECs
+	0x32, 0x19,  // viterbi and synchro search
+	0x33, 0xfc,  // rs control
+	0x34, 0x93,  // error control
+	0x0f, 0x92,
+	0xff, 0xff
+};
+
+
+static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
+	stv0299_writereg(fe, 0x21, (ratio      ) & 0xf0);
+
+	return 0;
+}
+
+static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
+{
+	int ret;
+	u8 data[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+
+	if ((params->frequency < 950000) || (params->frequency > 2150000))
+		return -EINVAL;
+
+	div = (params->frequency + (125 - 1)) / 125; // round correctly
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+	data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
+
+	ret = i2c_transfer(i2c, &msg, 1);
+	return (ret != 1) ? -EIO : 0;
+}
+
+static struct stv0299_config alps_bsbe1_config = {
+	.demod_address = 0x68,
+	.inittab = alps_bsbe1_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.skip_reinit = 0,
+	.min_delay_ms = 100,
+	.set_symbol_rate = alps_bsbe1_set_symbol_rate,
+	.pll_set = alps_bsbe1_pll_set,
+};
+
+#endif
diff --git a/drivers/media/dvb/frontends/bsru6.h b/drivers/media/dvb/frontends/bsru6.h
new file mode 100644
index 00000000000..2a5366ce79c
--- /dev/null
+++ b/drivers/media/dvb/frontends/bsru6.h
@@ -0,0 +1,140 @@
+/*
+ * bsru6.h - ALPS BSRU6 tuner support (moved from budget-ci.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+
+#ifndef BSRU6_H
+#define BSRU6_H
+
+static u8 alps_bsru6_inittab[] = {
+	0x01, 0x15,
+	0x02, 0x00,
+	0x03, 0x00,
+	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+	0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
+	0x06, 0x40,   /* DAC not used, set to high impendance mode */
+	0x07, 0x00,   /* DAC LSB */
+	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
+	0x09, 0x00,   /* FIFO */
+	0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
+	0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */
+	0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */
+	0x10, 0x3f,   // AGC2  0x3d
+	0x11, 0x84,
+	0x12, 0xb9,
+	0x15, 0xc9,   // lock detector threshold
+	0x16, 0x00,
+	0x17, 0x00,
+	0x18, 0x00,
+	0x19, 0x00,
+	0x1a, 0x00,
+	0x1f, 0x50,
+	0x20, 0x00,
+	0x21, 0x00,
+	0x22, 0x00,
+	0x23, 0x00,
+	0x28, 0x00,  // out imp: normal  out type: parallel FEC mode:0
+	0x29, 0x1e,  // 1/2 threshold
+	0x2a, 0x14,  // 2/3 threshold
+	0x2b, 0x0f,  // 3/4 threshold
+	0x2c, 0x09,  // 5/6 threshold
+	0x2d, 0x05,  // 7/8 threshold
+	0x2e, 0x01,
+	0x31, 0x1f,  // test all FECs
+	0x32, 0x19,  // viterbi and synchro search
+	0x33, 0xfc,  // rs control
+	0x34, 0x93,  // error control
+	0x0f, 0x52,
+	0xff, 0xff
+};
+
+static int alps_bsru6_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) {
+		aclk = 0xb7;
+		bclk = 0x47;
+	} else if (srate < 3000000) {
+		aclk = 0xb7;
+		bclk = 0x4b;
+	} else if (srate < 7000000) {
+		aclk = 0xb7;
+		bclk = 0x4f;
+	} else if (srate < 14000000) {
+		aclk = 0xb7;
+		bclk = 0x53;
+	} else if (srate < 30000000) {
+		aclk = 0xb6;
+		bclk = 0x53;
+	} else if (srate < 45000000) {
+		aclk = 0xb4;
+		bclk = 0x51;
+	}
+
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
+	stv0299_writereg(fe, 0x21, ratio & 0xf0);
+
+	return 0;
+}
+
+static int alps_bsru6_pll_set(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters *params)
+{
+	u8 buf[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
+
+	if ((params->frequency < 950000) || (params->frequency > 2150000))
+		return -EINVAL;
+
+	div = (params->frequency + (125 - 1)) / 125;	// round correctly
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
+	buf[3] = 0xC4;
+
+	if (params->frequency > 1530000)
+		buf[3] = 0xc0;
+
+	if (i2c_transfer(i2c, &msg, 1) != 1)
+		return -EIO;
+	return 0;
+}
+
+static struct stv0299_config alps_bsru6_config = {
+	.demod_address = 0x68,
+	.inittab = alps_bsru6_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.skip_reinit = 0,
+	.lock_output = STV0229_LOCKOUTPUT_1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = alps_bsru6_set_symbol_rate,
+	.pll_set = alps_bsru6_pll_set,
+};
+
+#endif
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index d15d32c51dc..f3edf8b517d 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -371,6 +371,15 @@ static int cx24110_initfe(struct dvb_frontend* fe)
 	return 0;
 }
 
+static int cx24110_sleep(struct dvb_frontend *fe)
+{
+	struct cx24110_state *state = fe->demodulator_priv;
+
+	if (state->config->pll_sleep)
+		  return state->config->pll_sleep(fe);
+	return 0;
+}
+
 static int cx24110_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
 {
 	struct cx24110_state *state = fe->demodulator_priv;
@@ -418,6 +427,9 @@ static int cx24110_send_diseqc_msg(struct dvb_frontend* fe,
 	struct cx24110_state *state = fe->demodulator_priv;
 	unsigned long timeout;
 
+	if (cmd->msg_len < 3 || cmd->msg_len > 6)
+		return -EINVAL;  /* not implemented */
+
 	for (i = 0; i < cmd->msg_len; i++)
 		cx24110_writereg(state, 0x79 + i, cmd->msg[i]);
 
@@ -639,6 +651,7 @@ static struct dvb_frontend_ops cx24110_ops = {
 	.release = cx24110_release,
 
 	.init = cx24110_initfe,
+	.sleep = cx24110_sleep,
 	.set_frontend = cx24110_set_frontend,
 	.get_frontend = cx24110_get_frontend,
 	.read_status = cx24110_read_status,
diff --git a/drivers/media/dvb/frontends/cx24110.h b/drivers/media/dvb/frontends/cx24110.h
index b63ecf26421..609ac642b40 100644
--- a/drivers/media/dvb/frontends/cx24110.h
+++ b/drivers/media/dvb/frontends/cx24110.h
@@ -35,6 +35,7 @@ struct cx24110_config
 	/* PLL maintenance */
 	int (*pll_init)(struct dvb_frontend* fe);
 	int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params);
+	int (*pll_sleep)(struct dvb_frontend* fe);
 };
 
 extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index 4dcb6050d4f..b6e2c387a04 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -362,6 +362,63 @@ struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261 = {
 };
 EXPORT_SYMBOL(dvb_pll_philips_sd1878_tda8261);
 
+/*
+ * Philips TD1316 Tuner.
+ */
+static void td1316_bw(u8 *buf, u32 freq, int bandwidth)
+{
+	u8 band;
+
+	/* determine band */
+	if (freq < 161000000)
+		band = 1;
+	else if (freq < 444000000)
+		band = 2;
+	else
+		band = 4;
+
+	buf[3] |= band;
+
+	/* setup PLL filter */
+	if (bandwidth == BANDWIDTH_8_MHZ)
+		buf[3] |= 1 << 3;
+}
+
+struct dvb_pll_desc dvb_pll_philips_td1316 = {
+	.name  = "Philips TD1316",
+	.min   =  87000000,
+	.max   = 895000000,
+	.setbw = td1316_bw,
+	.count = 9,
+	.entries = {
+		{  93834000, 36166000, 166666, 0xca, 0x60},
+		{ 123834000, 36166000, 166666, 0xca, 0xa0},
+		{ 163834000, 36166000, 166666, 0xca, 0xc0},
+		{ 253834000, 36166000, 166666, 0xca, 0x60},
+		{ 383834000, 36166000, 166666, 0xca, 0xa0},
+		{ 443834000, 36166000, 166666, 0xca, 0xc0},
+		{ 583834000, 36166000, 166666, 0xca, 0x60},
+		{ 793834000, 36166000, 166666, 0xca, 0xa0},
+		{ 858834000, 36166000, 166666, 0xca, 0xe0},
+	},
+};
+EXPORT_SYMBOL(dvb_pll_philips_td1316);
+
+/* FE6600 used on DViCO Hybrid */
+struct dvb_pll_desc dvb_pll_thomson_fe6600 = {
+	.name = "Thomson FE6600",
+	.min =  44250000,
+	.max = 858000000,
+	.count = 4,
+	.entries = {
+		{ 250000000, 36213333, 166667, 0xb4, 0x12 },
+		{ 455000000, 36213333, 166667, 0xfe, 0x11 },
+		{ 775500000, 36213333, 166667, 0xbc, 0x18 },
+		{ 999999999, 36213333, 166667, 0xf4, 0x18 },
+	}
+};
+EXPORT_SYMBOL(dvb_pll_thomson_fe6600);
+
 /* ----------------------------------------------------------- */
 /* code                                                        */
 
@@ -391,8 +448,8 @@ int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
 	div = (freq + desc->entries[i].offset) / desc->entries[i].stepsize;
 	buf[0] = div >> 8;
 	buf[1] = div & 0xff;
-	buf[2] = desc->entries[i].cb1;
-	buf[3] = desc->entries[i].cb2;
+	buf[2] = desc->entries[i].config;
+	buf[3] = desc->entries[i].cb;
 
 	if (desc->setbw)
 		desc->setbw(buf, freq, bandwidth);
diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h
index bb8d4b4eb18..2b846178498 100644
--- a/drivers/media/dvb/frontends/dvb-pll.h
+++ b/drivers/media/dvb/frontends/dvb-pll.h
@@ -15,8 +15,8 @@ struct dvb_pll_desc {
 		u32 limit;
 		u32 offset;
 		u32 stepsize;
-		u8  cb1;
-		u8  cb2;
+		u8  config;
+		u8  cb;
 	} entries[12];
 };
 
@@ -40,6 +40,9 @@ extern struct dvb_pll_desc dvb_pll_tuv1236d;
 extern struct dvb_pll_desc dvb_pll_tdhu2;
 extern struct dvb_pll_desc dvb_pll_samsung_tbmv;
 extern struct dvb_pll_desc dvb_pll_philips_sd1878_tda8261;
+extern struct dvb_pll_desc dvb_pll_philips_td1316;
+
+extern struct dvb_pll_desc dvb_pll_thomson_fe6600;
 
 int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
 		      u32 freq, int bandwidth);
diff --git a/drivers/media/dvb/frontends/lnbp21.h b/drivers/media/dvb/frontends/lnbp21.h
new file mode 100644
index 00000000000..0dcbe61b61b
--- /dev/null
+++ b/drivers/media/dvb/frontends/lnbp21.h
@@ -0,0 +1,139 @@
+/*
+ * lnbp21.h - driver for lnb supply and control ic lnbp21
+ *
+ * Copyright (C) 2006 Oliver Endriss
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
+ *
+ *
+ * the project's page is at http://www.linuxtv.org
+ */
+
+#ifndef _LNBP21_H
+#define _LNBP21_H
+
+/* system register */
+#define LNBP21_OLF	0x01
+#define LNBP21_OTF	0x02
+#define LNBP21_EN	0x04
+#define LNBP21_VSEL	0x08
+#define LNBP21_LLC	0x10
+#define LNBP21_TEN	0x20
+#define LNBP21_ISEL	0x40
+#define LNBP21_PCL	0x80
+
+struct lnbp21 {
+	u8			config;
+	u8			override_or;
+	u8			override_and;
+	struct i2c_adapter	*i2c;
+	void			(*release_chain)(struct dvb_frontend* fe);
+};
+
+static int lnbp21_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+	struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv;
+	struct i2c_msg msg = {	.addr = 0x08, .flags = 0,
+				.buf = &lnbp21->config,
+				.len = sizeof(lnbp21->config) };
+
+	lnbp21->config &= ~(LNBP21_VSEL | LNBP21_EN);
+
+	switch(voltage) {
+	case SEC_VOLTAGE_OFF:
+		break;
+	case SEC_VOLTAGE_13:
+		lnbp21->config |= LNBP21_EN;
+		break;
+	case SEC_VOLTAGE_18:
+		lnbp21->config |= (LNBP21_EN | LNBP21_VSEL);
+		break;
+	default:
+		return -EINVAL;
+	};
+
+	lnbp21->config |= lnbp21->override_or;
+	lnbp21->config &= lnbp21->override_and;
+
+	return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend *fe, long arg)
+{
+	struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv;
+	struct i2c_msg msg = {	.addr = 0x08, .flags = 0,
+				.buf = &lnbp21->config,
+				.len = sizeof(lnbp21->config) };
+
+	if (arg)
+		lnbp21->config |= LNBP21_LLC;
+	else
+		lnbp21->config &= ~LNBP21_LLC;
+
+	lnbp21->config |= lnbp21->override_or;
+	lnbp21->config &= lnbp21->override_and;
+
+	return (i2c_transfer(lnbp21->i2c, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static void lnbp21_exit(struct dvb_frontend *fe)
+{
+	struct lnbp21 *lnbp21 = (struct lnbp21 *) fe->misc_priv;
+
+	/* LNBP power off */
+	lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF);
+
+	/* free data & call next release routine */
+	fe->ops->release = lnbp21->release_chain;
+	kfree(fe->misc_priv);
+	fe->misc_priv = NULL;
+	if (fe->ops->release)
+		fe->ops->release(fe);
+}
+
+static int lnbp21_init(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear)
+{
+	struct lnbp21 *lnbp21 = kmalloc(sizeof(struct lnbp21), GFP_KERNEL);
+
+	if (!lnbp21)
+		return -ENOMEM;
+
+	/* default configuration */
+	lnbp21->config = LNBP21_ISEL;
+
+	/* bits which should be forced to '1' */
+	lnbp21->override_or = override_set;
+
+	/* bits which should be forced to '0' */
+	lnbp21->override_and = ~override_clear;
+
+	/* install release callback */
+	lnbp21->release_chain = fe->ops->release;
+	fe->ops->release = lnbp21_exit;
+
+	/* override frontend ops */
+	fe->ops->set_voltage = lnbp21_set_voltage;
+	fe->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
+
+	lnbp21->i2c = i2c;
+	fe->misc_priv = lnbp21;
+
+	return lnbp21_set_voltage(fe, SEC_VOLTAGE_OFF);
+}
+
+#endif
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index c63e9a5084e..8e8df7b4ca0 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -229,7 +229,7 @@ static int tda1004x_enable_tuner_i2c(struct tda1004x_state *state)
 	dprintk("%s\n", __FUNCTION__);
 
 	result = tda1004x_write_mask(state, TDA1004X_CONFC4, 2, 2);
-	msleep(1);
+	msleep(20);
 	return result;
 }
 
@@ -502,7 +502,12 @@ static int tda10046_fwupload(struct dvb_frontend* fe)
 	const struct firmware *fw;
 
 	/* reset + wake up chip */
-	tda1004x_write_byteI(state, TDA1004X_CONFC4, 0);
+	if (state->config->xtal_freq == TDA10046_XTAL_4M) {
+		tda1004x_write_byteI(state, TDA1004X_CONFC4, 0);
+	} else {
+		dprintk("%s: 16MHz Xtal, reducing I2C speed\n", __FUNCTION__);
+		tda1004x_write_byteI(state, TDA1004X_CONFC4, 0x80);
+	}
 	tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0);
 	/* let the clocks recover from sleep */
 	msleep(5);
@@ -651,7 +656,7 @@ static int tda10046_init(struct dvb_frontend* fe)
 	// tda setup
 	tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer
 	tda1004x_write_byteI(state, TDA1004X_AUTO, 0x87);    // 100 ppm crystal, select HP stream
-	tda1004x_write_byteI(state, TDA1004X_CONFC1, 8);      // disable pulse killer
+	tda1004x_write_byteI(state, TDA1004X_CONFC1, 0x88);      // enable pulse killer
 
 	switch (state->config->agc_config) {
 	case TDA10046_AGC_DEFAULT:
@@ -672,6 +677,12 @@ static int tda10046_init(struct dvb_frontend* fe)
 		tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
 		tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities
 		break;
+	case TDA10046_AGC_TDA827X_GPL:
+		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
+		tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
+		tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+		tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
+		break;
 	}
 	tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
 	tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on
@@ -683,6 +694,7 @@ static int tda10046_init(struct dvb_frontend* fe)
 	tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits
 	tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config
 	tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config
+	// tda1004x_write_mask(state, 0x50, 0x80, 0x80);         // handle out of guard echoes
 	tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7);
 
 	state->initialised = 1;
@@ -1027,6 +1039,7 @@ static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status
 		if (status == -1)
 			return -EIO;
 		cber |= (status << 8);
+		// The address 0x20 should be read to cope with a TDA10046 bug
 		tda1004x_read_byte(state, TDA1004X_CBER_RESET);
 
 		if (cber != 65535)
@@ -1047,7 +1060,8 @@ static int tda1004x_read_status(struct dvb_frontend* fe, fe_status_t * fe_status
 		status = tda1004x_read_byte(state, TDA1004X_VBER_MSB);
 		if (status == -1)
 			return -EIO;
-		vber |= ((status << 16) & 0x0f);
+		vber |= (status & 0x0f) << 16;
+		// The CVBER_LUT should be read to cope with TDA10046 hardware bug
 		tda1004x_read_byte(state, TDA1004X_CVBER_LUT);
 
 		// if RS has passed some valid TS packets, then we must be
@@ -1161,6 +1175,7 @@ static int tda1004x_read_ber(struct dvb_frontend* fe, u32* ber)
 	if (tmp < 0)
 		return -EIO;
 	*ber |= (tmp << 9);
+	// The address 0x20 should be read to cope with a TDA10046 bug
 	tda1004x_read_byte(state, TDA1004X_CBER_RESET);
 
 	dprintk("%s: ber=0x%x\n", __FUNCTION__, *ber);
@@ -1187,6 +1202,8 @@ static int tda1004x_sleep(struct dvb_frontend* fe)
 				tda1004x_disable_tuner_i2c(state);
 			}
 		}
+		/* set outputs to tristate */
+		tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0xff);
 		tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1);
 		break;
 	}
diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h
index 8659c52647a..cc0c4af6406 100644
--- a/drivers/media/dvb/frontends/tda1004x.h
+++ b/drivers/media/dvb/frontends/tda1004x.h
@@ -35,7 +35,8 @@ enum tda10046_agc {
 	TDA10046_AGC_DEFAULT,		/* original configuration */
 	TDA10046_AGC_IFO_AUTO_NEG,	/* IF AGC only, automatic, negtive */
 	TDA10046_AGC_IFO_AUTO_POS,	/* IF AGC only, automatic, positive */
-	TDA10046_AGC_TDA827X,	    /* IF AGC only, special setup for tda827x */
+	TDA10046_AGC_TDA827X,		/* IF AGC only, special setup for tda827x */
+	TDA10046_AGC_TDA827X_GPL,	/* same as above, but GPIOs 0 */
 };
 
 enum tda10046_if {
diff --git a/drivers/media/dvb/frontends/zl10353.c b/drivers/media/dvb/frontends/zl10353.c
new file mode 100644
index 00000000000..d7d9f59d76d
--- /dev/null
+++ b/drivers/media/dvb/frontends/zl10353.c
@@ -0,0 +1,311 @@
+/*
+ * Driver for Zarlink DVB-T ZL10353 demodulator
+ *
+ * Copyright (C) 2006 Christopher Pascoe <c.pascoe@itee.uq.edu.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+
+#include "dvb_frontend.h"
+#include "zl10353_priv.h"
+#include "zl10353.h"
+
+struct zl10353_state {
+	struct i2c_adapter *i2c;
+	struct dvb_frontend frontend;
+	struct dvb_frontend_ops ops;
+
+	struct zl10353_config config;
+};
+
+static int debug_regs = 0;
+
+static int zl10353_single_write(struct dvb_frontend *fe, u8 reg, u8 val)
+{
+	struct zl10353_state *state = fe->demodulator_priv;
+	u8 buf[2] = { reg, val };
+	struct i2c_msg msg = { .addr = state->config.demod_address, .flags = 0,
+			       .buf = buf, .len = 2 };
+	int err = i2c_transfer(state->i2c, &msg, 1);
+	if (err != 1) {
+		printk("zl10353: write to reg %x failed (err = %d)!\n", reg, err);
+		return err;
+	}
+	return 0;
+}
+
+int zl10353_write(struct dvb_frontend *fe, u8 *ibuf, int ilen)
+{
+	int err, i;
+	for (i = 0; i < ilen - 1; i++)
+		if ((err = zl10353_single_write(fe, ibuf[0] + i, ibuf[i + 1])))
+			return err;
+
+	return 0;
+}
+
+static int zl10353_read_register(struct zl10353_state *state, u8 reg)
+{
+	int ret;
+	u8 b0[1] = { reg };
+	u8 b1[1] = { 0 };
+	struct i2c_msg msg[2] = { { .addr = state->config.demod_address,
+				    .flags = 0,
+				    .buf = b0, .len = 1 },
+				  { .addr = state->config.demod_address,
+				    .flags = I2C_M_RD,
+				    .buf = b1, .len = 1 } };
+
+	ret = i2c_transfer(state->i2c, msg, 2);
+
+	if (ret != 2) {
+		printk("%s: readreg error (reg=%d, ret==%i)\n",
+		       __FUNCTION__, reg, ret);
+		return ret;
+	}
+
+	return b1[0];
+}
+
+static void zl10353_dump_regs(struct dvb_frontend *fe)
+{
+	struct zl10353_state *state = fe->demodulator_priv;
+	char buf[52], buf2[4];
+	int ret;
+	u8 reg;
+
+	/* Dump all registers. */
+	for (reg = 0; ; reg++) {
+		if (reg % 16 == 0) {
+			if (reg)
+				printk(KERN_DEBUG "%s\n", buf);
+			sprintf(buf, "%02x: ", reg);
+		}
+		ret = zl10353_read_register(state, reg);
+		if (ret >= 0)
+			sprintf(buf2, "%02x ", (u8)ret);
+		else
+			strcpy(buf2, "-- ");
+		strcat(buf, buf2);
+		if (reg == 0xff)
+			break;
+	}
+	printk(KERN_DEBUG "%s\n", buf);
+}
+
+static int zl10353_sleep(struct dvb_frontend *fe)
+{
+	static u8 zl10353_softdown[] = { 0x50, 0x0C, 0x44 };
+
+	zl10353_write(fe, zl10353_softdown, sizeof(zl10353_softdown));
+	return 0;
+}
+
+static int zl10353_set_parameters(struct dvb_frontend *fe,
+				  struct dvb_frontend_parameters *param)
+{
+	struct zl10353_state *state = fe->demodulator_priv;
+	u8 pllbuf[6] = { 0x67 };
+
+	/* These settings set "auto-everything" and start the FSM. */
+	zl10353_single_write(fe, 0x55, 0x80);
+	udelay(200);
+	zl10353_single_write(fe, 0xEA, 0x01);
+	udelay(200);
+	zl10353_single_write(fe, 0xEA, 0x00);
+
+	zl10353_single_write(fe, 0x56, 0x28);
+	zl10353_single_write(fe, 0x89, 0x20);
+	zl10353_single_write(fe, 0x5E, 0x00);
+	zl10353_single_write(fe, 0x65, 0x5A);
+	zl10353_single_write(fe, 0x66, 0xE9);
+	zl10353_single_write(fe, 0x62, 0x0A);
+
+	state->config.pll_set(fe, param, pllbuf + 1);
+	zl10353_write(fe, pllbuf, sizeof(pllbuf));
+
+	zl10353_single_write(fe, 0x70, 0x01);
+	udelay(250);
+	zl10353_single_write(fe, 0xE4, 0x00);
+	zl10353_single_write(fe, 0xE5, 0x2A);
+	zl10353_single_write(fe, 0xE9, 0x02);
+	zl10353_single_write(fe, 0xE7, 0x40);
+	zl10353_single_write(fe, 0xE8, 0x10);
+
+	return 0;
+}
+
+static int zl10353_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct zl10353_state *state = fe->demodulator_priv;
+	int s6, s7, s8;
+
+	if ((s6 = zl10353_read_register(state, STATUS_6)) < 0)
+		return -EREMOTEIO;
+	if ((s7 = zl10353_read_register(state, STATUS_7)) < 0)
+		return -EREMOTEIO;
+	if ((s8 = zl10353_read_register(state, STATUS_8)) < 0)
+		return -EREMOTEIO;
+
+	*status = 0;
+	if (s6 & (1 << 2))
+		*status |= FE_HAS_CARRIER;
+	if (s6 & (1 << 1))
+		*status |= FE_HAS_VITERBI;
+	if (s6 & (1 << 5))
+		*status |= FE_HAS_LOCK;
+	if (s7 & (1 << 4))
+		*status |= FE_HAS_SYNC;
+	if (s8 & (1 << 6))
+		*status |= FE_HAS_SIGNAL;
+
+	if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) !=
+	    (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC))
+		*status &= ~FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int zl10353_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+	struct zl10353_state *state = fe->demodulator_priv;
+	u8 _snr;
+
+	if (debug_regs)
+		zl10353_dump_regs(fe);
+
+	_snr = zl10353_read_register(state, SNR);
+	*snr = (_snr << 8) | _snr;
+
+	return 0;
+}
+
+static int zl10353_get_tune_settings(struct dvb_frontend *fe,
+				     struct dvb_frontend_tune_settings
+					 *fe_tune_settings)
+{
+	fe_tune_settings->min_delay_ms = 1000;
+	fe_tune_settings->step_size = 0;
+	fe_tune_settings->max_drift = 0;
+
+	return 0;
+}
+
+static int zl10353_init(struct dvb_frontend *fe)
+{
+	struct zl10353_state *state = fe->demodulator_priv;
+	u8 zl10353_reset_attach[6] = { 0x50, 0x03, 0x64, 0x46, 0x15, 0x0F };
+	int rc = 0;
+
+	if (debug_regs)
+		zl10353_dump_regs(fe);
+
+	/* Do a "hard" reset if not already done */
+	if (zl10353_read_register(state, 0x50) != 0x03) {
+		rc = zl10353_write(fe, zl10353_reset_attach,
+				   sizeof(zl10353_reset_attach));
+		if (debug_regs)
+			zl10353_dump_regs(fe);
+	}
+
+	return 0;
+}
+
+static void zl10353_release(struct dvb_frontend *fe)
+{
+	struct zl10353_state *state = fe->demodulator_priv;
+
+	kfree(state);
+}
+
+static struct dvb_frontend_ops zl10353_ops;
+
+struct dvb_frontend *zl10353_attach(const struct zl10353_config *config,
+				    struct i2c_adapter *i2c)
+{
+	struct zl10353_state *state = NULL;
+
+	/* allocate memory for the internal state */
+	state = kzalloc(sizeof(struct zl10353_state), GFP_KERNEL);
+	if (state == NULL)
+		goto error;
+
+	/* setup the state */
+	state->i2c = i2c;
+	memcpy(&state->config, config, sizeof(struct zl10353_config));
+	memcpy(&state->ops, &zl10353_ops, sizeof(struct dvb_frontend_ops));
+
+	/* check if the demod is there */
+	if (zl10353_read_register(state, CHIP_ID) != ID_ZL10353)
+		goto error;
+
+	/* create dvb_frontend */
+	state->frontend.ops = &state->ops;
+	state->frontend.demodulator_priv = state;
+
+	return &state->frontend;
+error:
+	kfree(state);
+	return NULL;
+}
+
+static struct dvb_frontend_ops zl10353_ops = {
+
+	.info = {
+		.name			= "Zarlink ZL10353 DVB-T",
+		.type			= FE_OFDM,
+		.frequency_min		= 174000000,
+		.frequency_max		= 862000000,
+		.frequency_stepsize	= 166667,
+		.frequency_tolerance	= 0,
+		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
+			FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
+			FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER |
+			FE_CAN_MUTE_TS
+	},
+
+	.release = zl10353_release,
+
+	.init = zl10353_init,
+	.sleep = zl10353_sleep,
+
+	.set_frontend = zl10353_set_parameters,
+	.get_tune_settings = zl10353_get_tune_settings,
+
+	.read_status = zl10353_read_status,
+	.read_snr = zl10353_read_snr,
+};
+
+module_param(debug_regs, int, 0644);
+MODULE_PARM_DESC(debug_regs, "Turn on/off frontend register dumps (default:off).");
+
+MODULE_DESCRIPTION("Zarlink ZL10353 DVB-T demodulator driver");
+MODULE_AUTHOR("Chris Pascoe");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(zl10353_attach);
+EXPORT_SYMBOL(zl10353_write);
diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h
new file mode 100644
index 00000000000..5cc4ae718d8
--- /dev/null
+++ b/drivers/media/dvb/frontends/zl10353.h
@@ -0,0 +1,43 @@
+/*
+ *  Driver for Zarlink DVB-T ZL10353 demodulator
+ *
+ *  Copyright (C) 2006 Christopher Pascoe <c.pascoe@itee.uq.edu.au>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#ifndef ZL10353_H
+#define ZL10353_H
+
+#include <linux/dvb/frontend.h>
+
+struct zl10353_config
+{
+	/* demodulator's I2C address */
+	u8 demod_address;
+
+	/* function which configures the PLL buffer (for secondary I2C
+	 * connected tuner) or tunes the PLL (for direct connected tuner) */
+	int (*pll_set)(struct dvb_frontend *fe,
+		       struct dvb_frontend_parameters *params, u8 *pllbuf);
+};
+
+extern struct dvb_frontend* zl10353_attach(const struct zl10353_config *config,
+					   struct i2c_adapter *i2c);
+
+extern int zl10353_write(struct dvb_frontend *fe, u8 *ibuf, int ilen);
+
+#endif /* ZL10353_H */
diff --git a/drivers/media/dvb/frontends/zl10353_priv.h b/drivers/media/dvb/frontends/zl10353_priv.h
new file mode 100644
index 00000000000..b72224bd7dd
--- /dev/null
+++ b/drivers/media/dvb/frontends/zl10353_priv.h
@@ -0,0 +1,42 @@
+/*
+ *  Driver for Zarlink DVB-T ZL10353 demodulator
+ *
+ *  Copyright (C) 2006 Christopher Pascoe <c.pascoe@itee.uq.edu.au>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
+ */
+
+#ifndef _ZL10353_PRIV_
+#define _ZL10353_PRIV_
+
+#define ID_ZL10353	0x14
+
+enum zl10353_reg_addr {
+	INTERRUPT_0	= 0x00,
+	INTERRUPT_1	= 0x01,
+	INTERRUPT_2	= 0x02,
+	INTERRUPT_3	= 0x03,
+	INTERRUPT_4	= 0x04,
+	INTERRUPT_5	= 0x05,
+	STATUS_6	= 0x06,
+	STATUS_7	= 0x07,
+	STATUS_8	= 0x08,
+	STATUS_9	= 0x09,
+	SNR		= 0x10,
+	CHIP_ID		= 0x7F,
+};
+
+#endif                          /* _ZL10353_PRIV_ */