Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git

Signed-off-by: Steve French <sfrench@us.ibm.com>

1 files changed, 3 insertions, 247 deletions

diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 238c77b52f8..c23c02d9564 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -41,6 +41,8 @@
 #include "l64781.h"
 #include "tda8083.h"
 #include "s5h1420.h"
+#include "lnbp21.h"
+#include "bsru6.h"
 
 static void Set22K (struct budget *budget, int state)
 {
@@ -184,64 +186,6 @@ static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t m
 	return 0;
 }
 
-static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-	u8 buf;
-	struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) };
-
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
-	switch(voltage) {
-	case SEC_VOLTAGE_13:
-		buf = (buf & 0xf7) | 0x04;
-		break;
-
-	case SEC_VOLTAGE_18:
-		buf = (buf & 0xf7) | 0x0c;
-		break;
-
-	case SEC_VOLTAGE_OFF:
-		buf = buf & 0xf0;
-		break;
-	}
-
-	msg.flags = 0;
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
-	return 0;
-}
-
-static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, long arg)
-{
-	struct budget* budget = (struct budget*) fe->dvb->priv;
-	u8 buf;
-	struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) };
-
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
-	if (arg) {
-		buf = buf | 0x10;
-	} else {
-		buf = buf & 0xef;
-	}
-
-	msg.flags = 0;
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
-
-	return 0;
-}
-
-static int lnbp21_init(struct budget* budget)
-{
-	u8 buf = 0x00;
-	struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = &buf, .len = sizeof(buf) };
-
-	if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1)
-		return -EIO;
-	return 0;
-}
-
 static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
 {
 	struct budget* budget = (struct budget*) fe->dvb->priv;
@@ -277,176 +221,6 @@ static struct ves1x93_config alps_bsrv2_config =
 	.pll_set = alps_bsrv2_pll_set,
 };
 
-static u8 alps_bsru6_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x00,
-	0x03, 0x00,
-	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
-	0x05, 0x35,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
-	0x06, 0x40,   /* DAC not used, set to high impendance mode */
-	0x07, 0x00,   /* DAC LSB */
-	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
-	0x09, 0x00,   /* FIFO */
-	0x0c, 0x51,   /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
-	0x0d, 0x82,   /* DC offset compensation = ON, beta_agc1 = 2 */
-	0x0e, 0x23,   /* alpha_tmg = 2, beta_tmg = 3 */
-	0x10, 0x3f,   // AGC2  0x3d
-	0x11, 0x84,
-	0x12, 0xb9,
-	0x15, 0xc9,   // lock detector threshold
-	0x16, 0x00,
-	0x17, 0x00,
-	0x18, 0x00,
-	0x19, 0x00,
-	0x1a, 0x00,
-	0x1f, 0x50,
-	0x20, 0x00,
-	0x21, 0x00,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00,  // out imp: normal  out type: parallel FEC mode:0
-	0x29, 0x1e,  // 1/2 threshold
-	0x2a, 0x14,  // 2/3 threshold
-	0x2b, 0x0f,  // 3/4 threshold
-	0x2c, 0x09,  // 5/6 threshold
-	0x2d, 0x05,  // 7/8 threshold
-	0x2e, 0x01,
-	0x31, 0x1f,  // test all FECs
-	0x32, 0x19,  // viterbi and synchro search
-	0x33, 0xfc,  // rs control
-	0x34, 0x93,  // error control
-	0x0f, 0x52,
-	0xff, 0xff
-};
-
-static int alps_bsru6_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
-{
-	u8 aclk = 0;
-	u8 bclk = 0;
-
-	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
-	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
-	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
-	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
-	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
-	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
-
-	stv0299_writereg (fe, 0x13, aclk);
-	stv0299_writereg (fe, 0x14, bclk);
-	stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
-	stv0299_writereg (fe, 0x20, (ratio >>  8) & 0xff);
-	stv0299_writereg (fe, 0x21, (ratio      ) & 0xf0);
-
-	return 0;
-}
-
-static int alps_bsru6_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
-{
-	u8 data[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	if ((params->frequency < 950000) || (params->frequency > 2150000)) return -EINVAL;
-
-	div = (params->frequency + (125 - 1)) / 125; // round correctly
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
-	data[3] = 0xC4;
-
-	if (params->frequency > 1530000) data[3] = 0xc0;
-
-	if (i2c_transfer(i2c, &msg, 1) != 1) return -EIO;
-	return 0;
-}
-
-static struct stv0299_config alps_bsru6_config = {
-
-	.demod_address = 0x68,
-	.inittab = alps_bsru6_inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.lock_output = STV0229_LOCKOUTPUT_1,
-	.volt13_op0_op1 = STV0299_VOLT13_OP1,
-	.min_delay_ms = 100,
-	.set_symbol_rate = alps_bsru6_set_symbol_rate,
-	.pll_set = alps_bsru6_pll_set,
-};
-
-static u8 alps_bsbe1_inittab[] = {
-	0x01, 0x15,
-	0x02, 0x30,
-	0x03, 0x00,
-	0x04, 0x7d,  /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
-	0x05, 0x35,  /* I2CT = 0, SCLT = 1, SDAT = 1 */
-	0x06, 0x40,  /* DAC not used, set to high impendance mode */
-	0x07, 0x00,  /* DAC LSB */
-	0x08, 0x40,  /* DiSEqC off, LNB power on OP2/LOCK pin on */
-	0x09, 0x00,  /* FIFO */
-	0x0c, 0x51,  /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
-	0x0d, 0x82,  /* DC offset compensation = ON, beta_agc1 = 2 */
-	0x0e, 0x23,  /* alpha_tmg = 2, beta_tmg = 3 */
-	0x10, 0x3f,  // AGC2 0x3d
-	0x11, 0x84,
-	0x12, 0xb9,
-	0x15, 0xc9,  // lock detector threshold
-	0x16, 0x00,
-	0x17, 0x00,
-	0x18, 0x00,
-	0x19, 0x00,
-	0x1a, 0x00,
-	0x1f, 0x50,
-	0x20, 0x00,
-	0x21, 0x00,
-	0x22, 0x00,
-	0x23, 0x00,
-	0x28, 0x00, // out imp: normal out type: parallel FEC mode:0
-	0x29, 0x1e, // 1/2 threshold
-	0x2a, 0x14, // 2/3 threshold
-	0x2b, 0x0f, // 3/4 threshold
-	0x2c, 0x09, // 5/6 threshold
-	0x2d, 0x05, // 7/8 threshold
-	0x2e, 0x01,
-	0x31, 0x1f, // test all FECs
-	0x32, 0x19, // viterbi and synchro search
-	0x33, 0xfc, // rs control
-	0x34, 0x93, // error control
-	0x0f, 0x92, // 0x80 = inverse AGC
-	0xff, 0xff
-};
-
-static int alps_bsbe1_pll_set(struct dvb_frontend* fe, struct i2c_adapter *i2c, struct dvb_frontend_parameters* params)
-{
-	int ret;
-	u8 data[4];
-	u32 div;
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
-
-	if ((params->frequency < 950000) || (params->frequency > 2150000))
-		return -EINVAL;
-
-	div = (params->frequency + (125 - 1)) / 125; // round correctly
-	data[0] = (div >> 8) & 0x7f;
-	data[1] = div & 0xff;
-	data[2] = 0x80 | ((div & 0x18000) >> 10) | 4;
-	data[3] = (params->frequency > 1530000) ? 0xE0 : 0xE4;
-
-	ret = i2c_transfer(i2c, &msg, 1);
-	return (ret != 1) ? -EIO : 0;
-}
-
-static struct stv0299_config alps_bsbe1_config = {
-	.demod_address = 0x68,
-	.inittab = alps_bsbe1_inittab,
-	.mclk = 88000000UL,
-	.invert = 1,
-	.skip_reinit = 0,
-	.min_delay_ms = 100,
-	.set_symbol_rate = alps_bsru6_set_symbol_rate,
-	.pll_set = alps_bsbe1_pll_set,
-};
-
 static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
 {
 	struct budget* budget = (struct budget*) fe->dvb->priv;
@@ -580,20 +354,6 @@ static u8 read_pwm(struct budget* budget)
 static void frontend_init(struct budget *budget)
 {
 	switch(budget->dev->pci->subsystem_device) {
-	case 0x1017:
-		// try the ALPS BSBE1 now
-		budget->dvb_frontend = stv0299_attach(&alps_bsbe1_config, &budget->i2c_adap);
-		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
-			budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
-			budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL;
-			if (lnbp21_init(budget)) {
-				printk("%s: No LNBP21 found!\n", __FUNCTION__);
-				goto error_out;
-			}
-		}
-
-		break;
 	case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
 	case 0x1013:
 		// try the ALPS BSRV2 first of all
@@ -646,9 +406,7 @@ static void frontend_init(struct budget *budget)
 	case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
 		budget->dvb_frontend = s5h1420_attach(&s5h1420_config, &budget->i2c_adap);
 		if (budget->dvb_frontend) {
-			budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
-			budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
-			if (lnbp21_init(budget)) {
+			if (lnbp21_init(budget->dvb_frontend, &budget->i2c_adap, 0, 0)) {
 				printk("%s: No LNBP21 found!\n", __FUNCTION__);
 				goto error_out;
 			}
@@ -719,7 +477,6 @@ static int budget_detach (struct saa7146_dev* dev)
 
 static struct saa7146_extension budget_extension;
 
-MAKE_BUDGET_INFO(ttbs2, "TT-Budget/WinTV-NOVA-S PCI (rev AL/alps bsbe1 lnbp21 frontend)", BUDGET_TT);
 MAKE_BUDGET_INFO(ttbs,	"TT-Budget/WinTV-NOVA-S  PCI",	BUDGET_TT);
 MAKE_BUDGET_INFO(ttbc,	"TT-Budget/WinTV-NOVA-C  PCI",	BUDGET_TT);
 MAKE_BUDGET_INFO(ttbt,	"TT-Budget/WinTV-NOVA-T  PCI",	BUDGET_TT);
@@ -732,7 +489,6 @@ static struct pci_device_id pci_tbl[] = {
 	MAKE_EXTENSION_PCI(ttbc,  0x13c2, 0x1004),
 	MAKE_EXTENSION_PCI(ttbt,  0x13c2, 0x1005),
 	MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
-	MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017),
 	MAKE_EXTENSION_PCI(ttbs,  0x13c2, 0x1016),
 	MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
 	MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),