Merge ../linus

Conflicts:

	drivers/cpufreq/cpufreq.c

96 files changed, 4205 insertions, 1015 deletions

diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index a0dcd59da76..79875958930 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -9,6 +9,7 @@ config DVB_B2C2_FLEXCOP
 	select DVB_STV0297 if !DVB_FE_CUSTOMISE
 	select DVB_BCM3510 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+	select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
 	help
 	  Support for the digital TV receiver chip made by B2C2 Inc. included in
 	  Technisats PCI cards and USB boxes.
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index b8ba8786345..c2b35e36624 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -14,7 +14,7 @@
 #include "stv0297.h"
 #include "mt312.h"
 #include "lgdt330x.h"
-#include "lg_h06xf.h"
+#include "lgh06xf.h"
 #include "dvb-pll.h"
 
 /* lnb control */
@@ -303,12 +303,6 @@ static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct fir
 	return request_firmware(fw, name, fc->dev);
 }
 
-static int lgdt3303_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
-{
-	struct flexcop_device *fc = fe->dvb->priv;
-	return lg_h06xf_pll_set(fe, &fc->i2c_adap, params);
-}
-
 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
 	.demod_address       = 0x59,
 	.demod_chip          = LGDT3303,
@@ -533,7 +527,7 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 	/* try the air atsc 3nd generation (lgdt3303) */
 	if ((fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) {
 		fc->dev_type          = FC_AIR_ATSC3;
-		fc->fe->ops.tuner_ops.set_params = lgdt3303_tuner_set_params;
+		dvb_attach(lgh06xf_attach, fc->fe, &fc->i2c_adap);
 		info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address);
 	} else
 	/* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
index 06893243f3d..6e166801505 100644
--- a/drivers/media/dvb/b2c2/flexcop-pci.c
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -63,7 +63,7 @@ struct flexcop_pci {
 
 	unsigned long last_irq;
 
-	struct work_struct irq_check_work;
+	struct delayed_work irq_check_work;
 
 	struct flexcop_device *fc_dev;
 };
@@ -97,9 +97,10 @@ static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_regi
 	return 0;
 }
 
-static void flexcop_pci_irq_check_work(void *data)
+static void flexcop_pci_irq_check_work(struct work_struct *work)
 {
-	struct flexcop_pci *fc_pci = data;
+	struct flexcop_pci *fc_pci =
+		container_of(work, struct flexcop_pci, irq_check_work.work);
 	struct flexcop_device *fc = fc_pci->fc_dev;
 
 	flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714);
@@ -371,7 +372,7 @@ static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	if ((ret = flexcop_pci_dma_init(fc_pci)) != 0)
 		goto err_fc_exit;
 
-	INIT_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work, fc_pci);
+	INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work);
 
 	return ret;
 
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c
index 2853ea1bdaf..87fb75f0d1c 100644
--- a/drivers/media/dvb/b2c2/flexcop-usb.c
+++ b/drivers/media/dvb/b2c2/flexcop-usb.c
@@ -246,7 +246,7 @@ static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb,
 	wIndex = (chipaddr << 8 ) | addr;
 
 	deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req,
-			((wValue && 0xff) << 8),wValue >> 8,((wIndex && 0xff) << 8),wIndex >> 8);
+		wValue & 0xff, wValue >> 8, wIndex & 0xff, wIndex >> 8);
 
 	len = usb_control_msg(fc_usb->udev,pipe,
 			req,
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index ae2ff5dc238..dd66b60fbc9 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -1,13 +1,13 @@
 config DVB_BT8XX
 	tristate "BT8xx based PCI cards"
 	depends on DVB_CORE && PCI && I2C && VIDEO_BT848
-	select DVB_PLL
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_SP887X if !DVB_FE_CUSTOMISE
 	select DVB_NXT6000 if !DVB_FE_CUSTOMISE
 	select DVB_CX24110 if !DVB_FE_CUSTOMISE
 	select DVB_OR51211 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+	select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select FW_LOADER
 	help
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 14e69a736ed..80a85cb4975 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -34,7 +34,6 @@
 #include "dvb_frontend.h"
 #include "dvb-bt8xx.h"
 #include "bt878.h"
-#include "dvb-pll.h"
 
 static int debug;
 
@@ -568,12 +567,6 @@ static struct mt352_config digitv_alps_tded4_config = {
 	.demod_init = digitv_alps_tded4_demod_init,
 };
 
-static int tdvs_tua6034_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
-{
-	struct dvb_bt8xx_card *card = (struct dvb_bt8xx_card *) fe->dvb->priv;
-	return lg_h06xf_pll_set(fe, card->i2c_adapter, params);
-}
-
 static struct lgdt330x_config tdvs_tua6034_config = {
 	.demod_address    = 0x0e,
 	.demod_chip       = LGDT3303,
@@ -616,7 +609,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 		lgdt330x_reset(card);
 		card->fe = dvb_attach(lgdt330x_attach, &tdvs_tua6034_config, card->i2c_adapter);
 		if (card->fe != NULL) {
-			card->fe->ops.tuner_ops.set_params = tdvs_tua6034_tuner_set_params;
+			dvb_attach(lgh06xf_attach, card->fe, card->i2c_adapter);
 			dprintk ("dvb_bt8xx: lgdt330x detected\n");
 		}
 		break;
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.h b/drivers/media/dvb/bt8xx/dvb-bt8xx.h
index 4745a9017a1..e75f4173c05 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.h
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.h
@@ -37,7 +37,7 @@
 #include "cx24110.h"
 #include "or51211.h"
 #include "lgdt330x.h"
-#include "lg_h06xf.h"
+#include "lgh06xf.h"
 #include "zl10353.h"
 
 struct dvb_bt8xx_card {
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index ff7d4f56ced..d64b96cb0c4 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -30,6 +30,7 @@
 #include <linux/input.h>
 #include <linux/dvb/frontend.h>
 #include <linux/mutex.h>
+#include <linux/mm.h>
 
 #include "dmxdev.h"
 #include "dvb_demux.h"
@@ -127,7 +128,7 @@ struct cinergyt2 {
 
 	struct dvbt_set_parameters_msg param;
 	struct dvbt_get_status_msg status;
-	struct work_struct query_work;
+	struct delayed_work query_work;
 
 	wait_queue_head_t poll_wq;
 	int pending_fe_events;
@@ -141,7 +142,7 @@ struct cinergyt2 {
 #ifdef ENABLE_RC
 	struct input_dev *rc_input_dev;
 	char phys[64];
-	struct work_struct rc_query_work;
+	struct delayed_work rc_query_work;
 	int rc_input_event;
 	u32 rc_last_code;
 	unsigned long last_event_jiffies;
@@ -275,8 +276,7 @@ static void cinergyt2_free_stream_urbs (struct cinergyt2 *cinergyt2)
 	int i;
 
 	for (i=0; i<STREAM_URB_COUNT; i++)
-		if (cinergyt2->stream_urb[i])
-			usb_free_urb(cinergyt2->stream_urb[i]);
+		usb_free_urb(cinergyt2->stream_urb[i]);
 
 	usb_buffer_free(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE,
 			    cinergyt2->streambuf, cinergyt2->streambuf_dmahandle);
@@ -287,7 +287,7 @@ static int cinergyt2_alloc_stream_urbs (struct cinergyt2 *cinergyt2)
 	int i;
 
 	cinergyt2->streambuf = usb_buffer_alloc(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE,
-					      SLAB_KERNEL, &cinergyt2->streambuf_dmahandle);
+					      GFP_KERNEL, &cinergyt2->streambuf_dmahandle);
 	if (!cinergyt2->streambuf) {
 		dprintk(1, "failed to alloc consistent stream memory area, bailing out!\n");
 		return -ENOMEM;
@@ -320,8 +320,7 @@ static void cinergyt2_stop_stream_xfer (struct cinergyt2 *cinergyt2)
 	cinergyt2_control_stream_transfer(cinergyt2, 0);
 
 	for (i=0; i<STREAM_URB_COUNT; i++)
-		if (cinergyt2->stream_urb[i])
-			usb_kill_urb(cinergyt2->stream_urb[i]);
+		usb_kill_urb(cinergyt2->stream_urb[i]);
 }
 
 static int cinergyt2_start_stream_xfer (struct cinergyt2 *cinergyt2)
@@ -724,9 +723,10 @@ static struct dvb_device cinergyt2_fe_template = {
 
 #ifdef ENABLE_RC
 
-static void cinergyt2_query_rc (void *data)
+static void cinergyt2_query_rc (struct work_struct *work)
 {
-	struct cinergyt2 *cinergyt2 = data;
+	struct cinergyt2 *cinergyt2 =
+		container_of(work, struct cinergyt2, rc_query_work.work);
 	char buf[1] = { CINERGYT2_EP1_GET_RC_EVENTS };
 	struct cinergyt2_rc_event rc_events[12];
 	int n, len, i;
@@ -746,6 +746,7 @@ static void cinergyt2_query_rc (void *data)
 				dprintk(1, "rc_input_event=%d Up\n", cinergyt2->rc_input_event);
 				input_report_key(cinergyt2->rc_input_dev,
 						 cinergyt2->rc_input_event, 0);
+				input_sync(cinergyt2->rc_input_dev);
 				cinergyt2->rc_input_event = KEY_MAX;
 			}
 			cinergyt2->rc_last_code = ~0;
@@ -783,6 +784,7 @@ static void cinergyt2_query_rc (void *data)
 			dprintk(1, "rc_input_event=%d\n", cinergyt2->rc_input_event);
 			input_report_key(cinergyt2->rc_input_dev,
 					 cinergyt2->rc_input_event, 1);
+			input_sync(cinergyt2->rc_input_dev);
 			cinergyt2->rc_last_code = rc_events[n].value;
 		}
 	}
@@ -798,8 +800,9 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2)
 {
 	struct input_dev *input_dev;
 	int i;
+	int err;
 
-	cinergyt2->rc_input_dev = input_dev = input_allocate_device();
+	input_dev = input_allocate_device();
 	if (!input_dev)
 		return -ENOMEM;
 
@@ -807,7 +810,7 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2)
 	strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys));
 	cinergyt2->rc_input_event = KEY_MAX;
 	cinergyt2->rc_last_code = ~0;
-	INIT_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc, cinergyt2);
+	INIT_DELAYED_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc);
 
 	input_dev->name = DRIVER_NAME " remote control";
 	input_dev->phys = cinergyt2->phys;
@@ -817,7 +820,13 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2)
 	input_dev->keycodesize = 0;
 	input_dev->keycodemax = 0;
 
-	input_register_device(cinergyt2->rc_input_dev);
+	err = input_register_device(input_dev);
+	if (err) {
+		input_free_device(input_dev);
+		return err;
+	}
+
+	cinergyt2->rc_input_dev = input_dev;
 	schedule_delayed_work(&cinergyt2->rc_query_work, HZ/2);
 
 	return 0;
@@ -848,9 +857,10 @@ static inline void cinergyt2_resume_rc(struct cinergyt2 *cinergyt2) { }
 
 #endif /* ENABLE_RC */
 
-static void cinergyt2_query (void *data)
+static void cinergyt2_query (struct work_struct *work)
 {
-	struct cinergyt2 *cinergyt2 = (struct cinergyt2 *) data;
+	struct cinergyt2 *cinergyt2 =
+		container_of(work, struct cinergyt2, query_work.work);
 	char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS };
 	struct dvbt_get_status_msg *s = &cinergyt2->status;
 	uint8_t lock_bits;
@@ -894,7 +904,7 @@ static int cinergyt2_probe (struct usb_interface *intf,
 
 	mutex_init(&cinergyt2->sem);
 	init_waitqueue_head (&cinergyt2->poll_wq);
-	INIT_WORK(&cinergyt2->query_work, cinergyt2_query, cinergyt2);
+	INIT_DELAYED_WORK(&cinergyt2->query_work, cinergyt2_query);
 
 	cinergyt2->udev = interface_to_usbdev(intf);
 	cinergyt2->param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS;
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 53304e6991a..e85972222ab 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -34,7 +34,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/list.h>
-#include <linux/suspend.h>
+#include <linux/freezer.h>
 #include <linux/jiffies.h>
 #include <asm/processor.h>
 
@@ -348,7 +348,7 @@ static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wra
 
 static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
 {
-	fe_status_t s;
+	fe_status_t s = 0;
 	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
 	/* if we've got no parameters, just keep idling */
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 8859ab74f0f..ebf4dc5190f 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -127,6 +127,7 @@ struct dvb_net_priv {
 	int in_use;
 	struct net_device_stats stats;
 	u16 pid;
+	struct net_device *net;
 	struct dvb_net *host;
 	struct dmx_demux *demux;
 	struct dmx_section_feed *secfeed;
@@ -1123,10 +1124,11 @@ static int dvb_set_mc_filter (struct net_device *dev, struct dev_mc_list *mc)
 }
 
 
-static void wq_set_multicast_list (void *data)
+static void wq_set_multicast_list (struct work_struct *work)
 {
-	struct net_device *dev = data;
-	struct dvb_net_priv *priv = dev->priv;
+	struct dvb_net_priv *priv =
+		container_of(work, struct dvb_net_priv, set_multicast_list_wq);
+	struct net_device *dev = priv->net;
 
 	dvb_net_feed_stop(dev);
 	priv->rx_mode = RX_MODE_UNI;
@@ -1167,9 +1169,11 @@ static void dvb_net_set_multicast_list (struct net_device *dev)
 }
 
 
-static void wq_restart_net_feed (void *data)
+static void wq_restart_net_feed (struct work_struct *work)
 {
-	struct net_device *dev = data;
+	struct dvb_net_priv *priv =
+		container_of(work, struct dvb_net_priv, restart_net_feed_wq);
+	struct net_device *dev = priv->net;
 
 	if (netif_running(dev)) {
 		dvb_net_feed_stop(dev);
@@ -1276,6 +1280,7 @@ static int dvb_net_add_if(struct dvb_net *dvbnet, u16 pid, u8 feedtype)
 	dvbnet->device[if_num] = net;
 
 	priv = net->priv;
+	priv->net = net;
 	priv->demux = dvbnet->demux;
 	priv->pid = pid;
 	priv->rx_mode = RX_MODE_UNI;
@@ -1284,8 +1289,8 @@ static int dvb_net_add_if(struct dvb_net *dvbnet, u16 pid, u8 feedtype)
 	priv->feedtype = feedtype;
 	reset_ule(priv);
 
-	INIT_WORK(&priv->set_multicast_list_wq, wq_set_multicast_list, net);
-	INIT_WORK(&priv->restart_net_feed_wq, wq_restart_net_feed, net);
+	INIT_WORK(&priv->set_multicast_list_wq, wq_set_multicast_list);
+	INIT_WORK(&priv->restart_net_feed_wq, wq_restart_net_feed);
 	mutex_init(&priv->mutex);
 
 	net->base_addr = pid;
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 2cc5caa26a0..ad52143602c 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -26,7 +26,7 @@ config DVB_USB_A800
 	tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver.
 
@@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB
 	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)"
 	depends on DVB_USB
 	select DVB_DIB3000MB
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by
 	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator.
@@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC
 	tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Support for USB2.0 DVB-T receivers based on reference designs made by
 	  DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator.
@@ -69,8 +69,10 @@ config DVB_USB_DIBUSB_MC
 config DVB_USB_DIB0700
 	tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
 	depends on DVB_USB
+	select DVB_DIB7000P
+	select DVB_DIB7000M
 	select DVB_DIB3000MC
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
 	  USB bridge is also present in devices having the DiB7700 DVB-T-USB
@@ -87,7 +89,7 @@ config DVB_USB_UMT_010
 	tristate "HanfTek UMT-010 DVB-T USB2.0 support"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver.
 
@@ -96,6 +98,7 @@ config DVB_USB_CXUSB
 	depends on DVB_USB
 	select DVB_CX22702 if !DVB_FE_CUSTOMISE
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
+	select DVB_TUNER_LGH06XF if !DVB_FE_CUSTOMISE
 	select DVB_MT352 if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	help
@@ -153,10 +156,21 @@ config DVB_USB_NOVA_T_USB2
 	tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support"
 	depends on DVB_USB
 	select DVB_DIB3000MC
-	select DVB_TUNER_MT2060
+	select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver.
 
+config DVB_USB_TTUSB2
+	tristate "Pinnacle 400e DVB-S USB2.0 support"
+	depends on DVB_USB
+	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
+	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+	select DVB_TDA826X if !DVB_FE_CUSTOMISE
+	help
+	  Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The
+	  firmware protocol used by this module is similar to the one used by the
+	  old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko.
+
 config DVB_USB_DTT200U
 	tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)"
 	depends on DVB_USB
diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile
index e239107998e..154d593bbb0 100644
--- a/drivers/media/dvb/dvb-usb/Makefile
+++ b/drivers/media/dvb/dvb-usb/Makefile
@@ -36,6 +36,9 @@ obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o
 dvb-usb-cxusb-objs = cxusb.o
 obj-$(CONFIG_DVB_USB_CXUSB) += dvb-usb-cxusb.o
 
+dvb-usb-ttusb2-objs = ttusb2.o
+obj-$(CONFIG_DVB_USB_TTUSB2) += dvb-usb-ttusb2.o
+
 dvb-usb-dib0700-objs = dib0700_core.o dib0700_devices.o
 obj-$(CONFIG_DVB_USB_DIB0700) += dvb-usb-dib0700.o
 
diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c
index 2ed3eb62d78..a6c5f19f680 100644
--- a/drivers/media/dvb/dvb-usb/a800.c
+++ b/drivers/media/dvb/dvb-usb/a800.c
@@ -116,24 +116,24 @@ static struct dvb_usb_device_properties a800_properties = {
 		{
 			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 			.pid_filter_count = 32,
-	.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-	.pid_filter       = dibusb_pid_filter,
-	.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-
-	.frontend_attach  = dibusb_dib3000mc_frontend_attach,
-	.tuner_attach     = dibusb_dib3000mc_tuner_attach,
-
-	/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x06,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
+			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
+			.pid_filter       = dibusb_pid_filter,
+			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
+
+			.frontend_attach  = dibusb_dib3000mc_frontend_attach,
+			.tuner_attach     = dibusb_dib3000mc_tuner_attach,
+
+			/* parameter for the MPEG2-data transfer */
+					.stream = {
+						.type = USB_BULK,
+				.count = 7,
+				.endpoint = 0x06,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
 
 			.size_of_priv     = sizeof(struct dibusb_state),
 		},
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 43f39069ef3..15d12fce34d 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -14,12 +14,12 @@
  * TODO: Use the cx25840-driver for the analogue part
  *
  * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de)
- * Copyright (C) 2005 Michael Krufky (mkrufky@m1k.net)
+ * Copyright (C) 2006 Michael Krufky (mkrufky@linuxtv.org)
  * Copyright (C) 2006 Chris Pascoe (c.pascoe@itee.uq.edu.au)
  *
- *	This program is free software; you can redistribute it and/or modify it
- *	under the terms of the GNU General Public License as published by the Free
- *	Software Foundation, version 2.
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License as published by the Free
+ *   Software Foundation, version 2.
  *
  * see Documentation/dvb/README.dvb-usb for more information
  */
@@ -27,29 +27,29 @@
 
 #include "cx22702.h"
 #include "lgdt330x.h"
-#include "lg_h06xf.h"
+#include "lgh06xf.h"
 #include "mt352.h"
 #include "mt352_priv.h"
 #include "zl10353.h"
 
 /* debug */
 int dvb_usb_cxusb_debug;
-module_param_named(debug,dvb_usb_cxusb_debug, int, 0644);
+module_param_named(debug, dvb_usb_cxusb_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS);
 
 static int cxusb_ctrl_msg(struct dvb_usb_device *d,
-		u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+			  u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen)
 {
 	int wo = (rbuf == NULL || rlen == 0); /* write-only */
 	u8 sndbuf[1+wlen];
-	memset(sndbuf,0,1+wlen);
+	memset(sndbuf, 0, 1+wlen);
 
 	sndbuf[0] = cmd;
-	memcpy(&sndbuf[1],wbuf,wlen);
+	memcpy(&sndbuf[1], wbuf, wlen);
 	if (wo)
-		dvb_usb_generic_write(d,sndbuf,1+wlen);
+		dvb_usb_generic_write(d, sndbuf, 1+wlen);
 	else
-		dvb_usb_generic_rw(d,sndbuf,1+wlen,rbuf,rlen,0);
+		dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0);
 
 	return 0;
 }
@@ -58,14 +58,14 @@ static int cxusb_ctrl_msg(struct dvb_usb_device *d,
 static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff)
 {
 	struct cxusb_state *st = d->priv;
-	u8 o[2],i;
+	u8 o[2], i;
 
 	if (st->gpio_write_state[GPIO_TUNER] == onoff)
 		return;
 
 	o[0] = GPIO_TUNER;
 	o[1] = onoff;
-	cxusb_ctrl_msg(d,CMD_GPIO_WRITE,o,2,&i,1);
+	cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1);
 
 	if (i != 0x01)
 		deb_info("gpio_write failed.\n");
@@ -74,7 +74,8 @@ static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff)
 }
 
 /* I2C */
-static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
+static int cxusb_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+			  int num)
 {
 	struct dvb_usb_device *d = i2c_get_adapdata(adap);
 	int i;
@@ -89,12 +90,12 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
 
 		if (d->udev->descriptor.idVendor == USB_VID_MEDION)
 			switch (msg[i].addr) {
-				case 0x63:
-					cxusb_gpio_tuner(d,0);
-					break;
-				default:
-					cxusb_gpio_tuner(d,1);
-					break;
+			case 0x63:
+				cxusb_gpio_tuner(d, 0);
+				break;
+			default:
+				cxusb_gpio_tuner(d, 1);
+				break;
 			}
 
 		/* read request */
@@ -103,26 +104,27 @@ static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
 			obuf[0] = msg[i].len;
 			obuf[1] = msg[i+1].len;
 			obuf[2] = msg[i].addr;
-			memcpy(&obuf[3],msg[i].buf,msg[i].len);
+			memcpy(&obuf[3], msg[i].buf, msg[i].len);
 
 			if (cxusb_ctrl_msg(d, CMD_I2C_READ,
-						obuf, 3+msg[i].len,
-						ibuf, 1+msg[i+1].len) < 0)
+					   obuf, 3+msg[i].len,
+					   ibuf, 1+msg[i+1].len) < 0)
 				break;
 
 			if (ibuf[0] != 0x08)
 				deb_i2c("i2c read may have failed\n");
 
-			memcpy(msg[i+1].buf,&ibuf[1],msg[i+1].len);
+			memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len);
 
 			i++;
 		} else { /* write */
 			u8 obuf[2+msg[i].len], ibuf;
 			obuf[0] = msg[i].addr;
 			obuf[1] = msg[i].len;
-			memcpy(&obuf[2],msg[i].buf,msg[i].len);
+			memcpy(&obuf[2], msg[i].buf, msg[i].len);
 
-			if (cxusb_ctrl_msg(d,CMD_I2C_WRITE, obuf, 2+msg[i].len, &ibuf,1) < 0)
+			if (cxusb_ctrl_msg(d, CMD_I2C_WRITE, obuf,
+					   2+msg[i].len, &ibuf,1) < 0)
 				break;
 			if (ibuf != 0x08)
 				deb_i2c("i2c write may have failed\n");
@@ -324,16 +326,8 @@ static int cxusb_mt352_demod_init(struct dvb_frontend* fe)
 	return 0;
 }
 
-static int cxusb_lgh064f_tuner_set_params(struct dvb_frontend *fe,
-					  struct dvb_frontend_parameters *fep)
-{
-	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	return lg_h06xf_pll_set(fe, &adap->dev->i2c_adap, fep);
-}
-
 static struct cx22702_config cxusb_cx22702_config = {
 	.demod_address = 0x63,
-
 	.output_mode = CX22702_PARALLEL_OUTPUT,
 };
 
@@ -374,31 +368,27 @@ static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
 
 static int cxusb_dee1601_tuner_attach(struct dvb_usb_adapter *adap)
 {
-	adap->pll_addr = 0x61;
-	adap->pll_desc = &dvb_pll_thomson_dtt7579;
-	adap->fe->ops.tuner_ops.calc_regs = dvb_usb_tuner_calc_regs;
+	dvb_attach(dvb_pll_attach, adap->fe, 0x61,
+		   NULL, &dvb_pll_thomson_dtt7579);
 	return 0;
 }
 
 static int cxusb_lgz201_tuner_attach(struct dvb_usb_adapter *adap)
 {
-	adap->pll_addr = 0x61;
-	adap->pll_desc = &dvb_pll_lg_z201;
-	adap->fe->ops.tuner_ops.calc_regs = dvb_usb_tuner_calc_regs;
+	dvb_attach(dvb_pll_attach, adap->fe, 0x61, NULL, &dvb_pll_lg_z201);
 	return 0;
 }
 
 static int cxusb_dtt7579_tuner_attach(struct dvb_usb_adapter *adap)
 {
-	adap->pll_addr = 0x60;
-	adap->pll_desc = &dvb_pll_thomson_dtt7579;
-	adap->fe->ops.tuner_ops.calc_regs = dvb_usb_tuner_calc_regs;
+	dvb_attach(dvb_pll_attach, adap->fe, 0x60,
+		   NULL, &dvb_pll_thomson_dtt7579);
 	return 0;
 }
 
-static int cxusb_lgdt3303_tuner_attach(struct dvb_usb_adapter *adap)
+static int cxusb_lgh064f_tuner_attach(struct dvb_usb_adapter *adap)
 {
-	adap->fe->ops.tuner_ops.set_params = cxusb_lgh064f_tuner_set_params;
+	dvb_attach(lgh06xf_attach, adap->fe, &adap->dev->i2c_adap);
 	return 0;
 }
 
@@ -410,7 +400,8 @@ static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap)
 
 	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, &b, 1);
 
-	if ((adap->fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config, &adap->dev->i2c_adap)) != NULL)
+	if ((adap->fe = dvb_attach(cx22702_attach, &cxusb_cx22702_config,
+				   &adap->dev->i2c_adap)) != NULL)
 		return 0;
 
 	return -EIO;
@@ -423,7 +414,8 @@ static int cxusb_lgdt3303_frontend_attach(struct dvb_usb_adapter *adap)
 
 	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
 
-	if ((adap->fe = dvb_attach(lgdt330x_attach, &cxusb_lgdt3303_config, &adap->dev->i2c_adap)) != NULL)
+	if ((adap->fe = dvb_attach(lgdt330x_attach, &cxusb_lgdt3303_config,
+				   &adap->dev->i2c_adap)) != NULL)
 		return 0;
 
 	return -EIO;
@@ -437,7 +429,8 @@ static int cxusb_mt352_frontend_attach(struct dvb_usb_adapter *adap)
 
 	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
 
-	if ((adap->fe = dvb_attach(mt352_attach, &cxusb_mt352_config, &adap->dev->i2c_adap)) != NULL)
+	if ((adap->fe = dvb_attach(mt352_attach, &cxusb_mt352_config,
+				   &adap->dev->i2c_adap)) != NULL)
 		return 0;
 
 	return -EIO;
@@ -450,8 +443,11 @@ static int cxusb_dee1601_frontend_attach(struct dvb_usb_adapter *adap)
 
 	cxusb_ctrl_msg(adap->dev, CMD_DIGITAL, NULL, 0, NULL, 0);
 
-	if (((adap->fe = dvb_attach(mt352_attach, &cxusb_dee1601_config, &adap->dev->i2c_adap)) != NULL) ||
-		((adap->fe = dvb_attach(zl10353_attach, &cxusb_zl10353_dee1601_config, &adap->dev->i2c_adap)) != NULL))
+	if (((adap->fe = dvb_attach(mt352_attach, &cxusb_dee1601_config,
+				    &adap->dev->i2c_adap)) != NULL) ||
+		((adap->fe = dvb_attach(zl10353_attach,
+					&cxusb_zl10353_dee1601_config,
+					&adap->dev->i2c_adap)) != NULL))
 		return 0;
 
 	return -EIO;
@@ -463,7 +459,8 @@ static int cxusb_dee1601_frontend_attach(struct dvb_usb_adapter *adap)
  */
 
 #define BLUEBIRD_01_ID_OFFSET 6638
-static int bluebird_patch_dvico_firmware_download(struct usb_device *udev, const struct firmware *fw)
+static int bluebird_patch_dvico_firmware_download(struct usb_device *udev,
+						  const struct firmware *fw)
 {
 	if (fw->size < BLUEBIRD_01_ID_OFFSET + 4)
 		return -EINVAL;
@@ -471,10 +468,12 @@ static int bluebird_patch_dvico_firmware_download(struct usb_device *udev, const
 	if (fw->data[BLUEBIRD_01_ID_OFFSET] == (USB_VID_DVICO & 0xff) &&
 	    fw->data[BLUEBIRD_01_ID_OFFSET + 1] == USB_VID_DVICO >> 8) {
 
-		fw->data[BLUEBIRD_01_ID_OFFSET + 2] = udev->descriptor.idProduct + 1;
-		fw->data[BLUEBIRD_01_ID_OFFSET + 3] = udev->descriptor.idProduct >> 8;
+		fw->data[BLUEBIRD_01_ID_OFFSET + 2] =
+			udev->descriptor.idProduct + 1;
+		fw->data[BLUEBIRD_01_ID_OFFSET + 3] =
+			udev->descriptor.idProduct >> 8;
 
-		return usb_cypress_load_firmware(udev,fw,CYPRESS_FX2);
+		return usb_cypress_load_firmware(udev, fw, CYPRESS_FX2);
 	}
 
 	return -EINVAL;
@@ -488,7 +487,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties;
 static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties;
 
 static int cxusb_probe(struct usb_interface *intf,
-		const struct usb_device_id *id)
+		       const struct usb_device_id *id)
 {
 	if (dvb_usb_device_init(intf,&cxusb_medion_properties,THIS_MODULE,NULL) == 0 ||
 		dvb_usb_device_init(intf,&cxusb_bluebird_lgh064f_properties,THIS_MODULE,NULL) == 0 ||
@@ -502,20 +501,20 @@ static int cxusb_probe(struct usb_interface *intf,
 }
 
 static struct usb_device_id cxusb_table [] = {
-		{ USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_COLD) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_WARM) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_COLD) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_WARM) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD) },
-		{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM) },
-		{}		/* Terminating entry */
+	{ USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_COLD) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LG064F_WARM) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_COLD) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_LGZ201_WARM) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_COLD) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_TH7579_WARM) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD) },
+	{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM) },
+	{}		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE (usb, cxusb_table);
 
@@ -529,20 +528,20 @@ static struct dvb_usb_device_properties cxusb_medion_properties = {
 	.num_adapters = 1,
 	.adapter = {
 		{
-	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.frontend_attach  = cxusb_cx22702_frontend_attach,
-	.tuner_attach     = cxusb_fmd1216me_tuner_attach,
-	/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-		.count = 5,
-		.endpoint = 0x02,
-		.u = {
-			.bulk = {
-				.buffersize = 8192,
-			}
-		}
-	},
+			.streaming_ctrl   = cxusb_streaming_ctrl,
+			.frontend_attach  = cxusb_cx22702_frontend_attach,
+			.tuner_attach     = cxusb_fmd1216me_tuner_attach,
+			/* parameter for the MPEG2-data transfer */
+					.stream = {
+						.type = USB_BULK,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 8192,
+					}
+				}
+			},
 
 		},
 	},
@@ -575,21 +574,21 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = {
 	.num_adapters = 1,
 	.adapter = {
 		{
-	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.frontend_attach  = cxusb_lgdt3303_frontend_attach,
-	.tuner_attach     = cxusb_lgdt3303_tuner_attach,
-
-	/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-		.count = 5,
-		.endpoint = 0x02,
-		.u = {
-			.bulk = {
-				.buffersize = 8192,
-			}
-		}
-	},
+			.streaming_ctrl   = cxusb_streaming_ctrl,
+			.frontend_attach  = cxusb_lgdt3303_frontend_attach,
+			.tuner_attach     = cxusb_lgh064f_tuner_attach,
+
+			/* parameter for the MPEG2-data transfer */
+					.stream = {
+						.type = USB_BULK,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 8192,
+					}
+				}
+			},
 		},
 	},
 
@@ -627,20 +626,20 @@ static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = {
 	.num_adapters = 1,
 	.adapter = {
 		{
-	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.frontend_attach  = cxusb_dee1601_frontend_attach,
-	.tuner_attach     = cxusb_dee1601_tuner_attach,
-	/* parameter for the MPEG2-data transfer */
+			.streaming_ctrl   = cxusb_streaming_ctrl,
+			.frontend_attach  = cxusb_dee1601_frontend_attach,
+			.tuner_attach     = cxusb_dee1601_tuner_attach,
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 5,
-		.endpoint = 0x04,
-		.u = {
-			.bulk = {
-				.buffersize = 8192,
-			}
-		}
-	},
+				.count = 5,
+				.endpoint = 0x04,
+				.u = {
+					.bulk = {
+						.buffersize = 8192,
+					}
+				}
+			},
 		},
 	},
 
@@ -686,21 +685,21 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = {
 	.num_adapters = 2,
 	.adapter = {
 		{
-	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.frontend_attach  = cxusb_mt352_frontend_attach,
-	.tuner_attach     = cxusb_lgz201_tuner_attach,
+			.streaming_ctrl   = cxusb_streaming_ctrl,
+			.frontend_attach  = cxusb_mt352_frontend_attach,
+			.tuner_attach     = cxusb_lgz201_tuner_attach,
 
-	/* parameter for the MPEG2-data transfer */
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 5,
-		.endpoint = 0x04,
-		.u = {
-			.bulk = {
-				.buffersize = 8192,
-			}
-		}
-	},
+				.count = 5,
+				.endpoint = 0x04,
+				.u = {
+					.bulk = {
+						.buffersize = 8192,
+					}
+				}
+			},
 		},
 	},
 	.power_ctrl       = cxusb_bluebird_power_ctrl,
@@ -736,21 +735,21 @@ static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = {
 	.num_adapters = 1,
 	.adapter = {
 		{
-	.streaming_ctrl   = cxusb_streaming_ctrl,
-	.frontend_attach  = cxusb_mt352_frontend_attach,
-	.tuner_attach     = cxusb_dtt7579_tuner_attach,
+			.streaming_ctrl   = cxusb_streaming_ctrl,
+			.frontend_attach  = cxusb_mt352_frontend_attach,
+			.tuner_attach     = cxusb_dtt7579_tuner_attach,
 
-	/* parameter for the MPEG2-data transfer */
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 5,
-		.endpoint = 0x04,
-		.u = {
-			.bulk = {
-				.buffersize = 8192,
-			}
-		}
-	},
+				.count = 5,
+				.endpoint = 0x04,
+				.u = {
+					.bulk = {
+						.buffersize = 8192,
+					}
+				}
+			},
 		},
 	},
 	.power_ctrl       = cxusb_bluebird_power_ctrl,
@@ -776,7 +775,7 @@ static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = {
 static struct usb_driver cxusb_driver = {
 	.name		= "dvb_usb_cxusb",
 	.probe		= cxusb_probe,
-	.disconnect = dvb_usb_device_exit,
+	.disconnect     = dvb_usb_device_exit,
 	.id_table	= cxusb_table,
 };
 
@@ -802,7 +801,7 @@ module_init (cxusb_module_init);
 module_exit (cxusb_module_exit);
 
 MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
-MODULE_AUTHOR("Michael Krufky <mkrufky@m1k.net>");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
 MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
 MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design");
 MODULE_VERSION("1.0-alpha");
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index ac84347f9d4..cda3adea24f 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -24,18 +24,23 @@ extern int dvb_usb_dib0700_debug;
 #define REQUEST_I2C_WRITE    0x3
 #define REQUEST_POLL_RC      0x4
 #define REQUEST_JUMPRAM      0x8
+#define REQUEST_SET_CLOCK    0xB
 #define REQUEST_SET_GPIO     0xC
 #define REQUEST_ENABLE_VIDEO 0xF
 	// 1 Byte: 4MSB(1 = enable streaming, 0 = disable streaming) 4LSB(Video Mode: 0 = MPEG2 188Bytes, 1 = Analog)
 	// 2 Byte: MPEG2 mode:  4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1)
 	// 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines)    4LSB(     "                "           )
+#define REQUEST_GET_VERSION  0x15
 
 struct dib0700_state {
 	u8 channel_state;
 	u16 mt2060_if1[2];
+
+	u8 is_dib7000pc;
 };
 
 extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);
+extern int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3);
 extern int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw);
 extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
 extern struct i2c_algorithm dib0700_i2c_algo;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index dca6c698566..6a4d150784a 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -135,14 +135,46 @@ struct i2c_algorithm dib0700_i2c_algo = {
 int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
 			struct dvb_usb_device_description **desc, int *cold)
 {
-	u8 buf[3] = { REQUEST_SET_GPIO, 4, (GPIO_IN << 7) | (0 << 6) }; // GPIO4 is save - used for I2C
-	*cold = usb_control_msg(udev, usb_sndctrlpipe(udev,0),
-		buf[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, buf, 3, USB_CTRL_GET_TIMEOUT) != 3;
+	u8 b[16];
+	s16 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev,0),
+		REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, 16, USB_CTRL_GET_TIMEOUT);
+
+	deb_info("FW GET_VERSION length: %d\n",ret);
+
+	*cold = ret <= 0;
 
 	deb_info("cold: %d\n", *cold);
 	return 0;
 }
 
+static int dib0700_set_clock(struct dvb_usb_device *d, u8 en_pll,
+	u8 pll_src, u8 pll_range, u8 clock_gpio3, u16 pll_prediv,
+	u16 pll_loopdiv, u16 free_div, u16 dsuScaler)
+{
+	u8 b[10];
+	b[0] = REQUEST_SET_CLOCK;
+	b[1] = (en_pll << 7) | (pll_src << 6) | (pll_range << 5) | (clock_gpio3 << 4);
+	b[2] = (pll_prediv >> 8)  & 0xff; // MSB
+	b[3] =  pll_prediv        & 0xff; // LSB
+	b[4] = (pll_loopdiv >> 8) & 0xff; // MSB
+	b[5] =  pll_loopdiv       & 0xff; // LSB
+	b[6] = (free_div >> 8)    & 0xff; // MSB
+	b[7] =  free_div          & 0xff; // LSB
+	b[8] = (dsuScaler >> 8)   & 0xff; // MSB
+	b[9] =  dsuScaler         & 0xff; // LSB
+
+	return dib0700_ctrl_wr(d, b, 10);
+}
+
+int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3)
+{
+	switch (clk_MHz) {
+		case 72: dib0700_set_clock(d, 1, 0, 1, clock_out_gp3, 2, 24, 0, 0x4c); break;
+		default: return -EINVAL;
+	}
+	return 0;
+}
+
 static int dib0700_jumpram(struct usb_device *udev, u32 address)
 {
 	int ret, actlen;
@@ -197,7 +229,7 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
 		/* start the firmware */
 		if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) {
 			info("firmware started successfully.");
-			msleep(100);
+			msleep(500);
 		}
 	} else
 		ret = -EIO;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index e473bfed226..2208757d901 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -9,6 +9,8 @@
 #include "dib0700.h"
 
 #include "dib3000mc.h"
+#include "dib7000m.h"
+#include "dib7000p.h"
 #include "mt2060.h"
 
 static int force_lna_activation;
@@ -95,37 +97,189 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
 }
 
 /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */
-/*
-static struct mt2060_config stk7000p_mt2060_config = {
-	0x60
+static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = {
+	BAND_UHF | BAND_VHF,       // band_caps
+
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
+
+	712,  // inv_gain
+	41,  // time_stabiliz
+
+	0,  // alpha_level
+	118,  // thlock
+
+	0,     // wbd_inv
+	4095,  // wbd_ref
+	0,     // wbd_sel
+	0,     // wbd_alpha
+
+	42598,  // agc1_max
+	17694,  // agc1_min
+	45875,  // agc2_max
+	2621,  // agc2_min
+	0,  // agc1_pt1
+	76,  // agc1_pt2
+	139,  // agc1_pt3
+	52,  // agc1_slope1
+	59,  // agc1_slope2
+	107,  // agc2_pt1
+	172,  // agc2_pt2
+	57,  // agc2_slope1
+	70,  // agc2_slope2
+
+	21,  // alpha_mant
+	25,  // alpha_exp
+	28,  // beta_mant
+	48,  // beta_exp
+
+	1,  // perform_agc_softsplit
+	{  0,     // split_min
+	   107,   // split_max
+	   51800, // global_split_min
+	   24700  // global_split_max
+	},
+};
+
+static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = {
+	BAND_UHF | BAND_VHF,
+
+	/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
+	 * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */
+	(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), // setup
+
+	712, // inv_gain
+	41,  // time_stabiliz
+
+	0,   // alpha_level
+	118, // thlock
+
+	0,    // wbd_inv
+	4095, // wbd_ref
+	0,    // wbd_sel
+	0,    // wbd_alpha
+
+	42598, // agc1_max
+	16384, // agc1_min
+	42598, // agc2_max
+	    0, // agc2_min
+
+	  0,   // agc1_pt1
+	137,   // agc1_pt2
+	255,   // agc1_pt3
+
+	  0,   // agc1_slope1
+	255,   // agc1_slope2
+
+	0,     // agc2_pt1
+	0,     // agc2_pt2
+
+	 0,    // agc2_slope1
+	41,    // agc2_slope2
+
+	15, // alpha_mant
+	25, // alpha_exp
+
+	28, // beta_mant
+	48, // beta_exp
+
+	0, // perform_agc_softsplit
+};
+
+static struct dibx000_bandwidth_config stk7700p_pll_config = {
+	60000, 30000, // internal, sampling
+	1, 8, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
+	0, 0, 1, 1, 0, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
+	(3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
+	60258167, // ifreq
+	20452225, // timf
+};
+
+static struct dib7000m_config stk7700p_dib7000m_config = {
+	.dvbt_mode = 1,
+	.output_mpeg2_in_188_bytes = 1,
+	.quartz_direct = 1,
+
+	.agc_config_count = 1,
+	.agc = &stk7700p_7000m_mt2060_agc_config,
+	.bw  = &stk7700p_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
+};
+
+static struct dib7000p_config stk7700p_dib7000p_config = {
+	.output_mpeg2_in_188_bytes = 1,
+
+	.agc = &stk7700p_7000p_mt2060_agc_config,
+	.bw  = &stk7700p_pll_config,
+
+	.gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS,
+	.gpio_val = DIB7000M_GPIO_DEFAULT_VALUES,
+	.gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS,
 };
-*/
 
 static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap)
 {
+	struct dib0700_state *st = adap->dev->priv;
 	/* unless there is no real power management in DVB - we leave the device on GPIO6 */
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10);
-	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10);
+
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 0); msleep(50);
+
+	dib0700_set_gpio(adap->dev, GPIO6,  GPIO_OUT, 1); msleep(10);
+	dib0700_set_gpio(adap->dev, GPIO9,  GPIO_OUT, 1);
+
 	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10);
+	dib0700_ctrl_clock(adap->dev, 72, 1);
+	dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100);
+
+	dib0700_set_gpio(adap->dev,  GPIO0, GPIO_OUT, 1);
+
+	st->mt2060_if1[0] = 1220;
+
+	if (dib7000pc_detection(&adap->dev->i2c_adap)) {
+		adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config);
+		st->is_dib7000pc = 1;
+	} else
+		adap->fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config);
 
-//	adap->fe = dib7000m_attach(&adap->dev->i2c_adap, &stk7700p_dib7000m_config, 18);
-	return 0;
+	return adap->fe == NULL ? -ENODEV : 0;
 }
 
+static struct mt2060_config stk7700p_mt2060_config = {
+	0x60
+};
+
 static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
 {
-//	tun_i2c = dib7000m_get_tuner_i2c_master(adap->fe, 1);
-//	return mt2060_attach(adap->fe, tun_i2c, &stk3000p_mt2060_config, if1);
-	return 0;
+	struct dib0700_state *st = adap->dev->priv;
+	struct i2c_adapter *tun_i2c;
+
+	if (st->is_dib7000pc)
+		tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+	else
+		tun_i2c = dib7000m_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
+
+	return dvb_attach(mt2060_attach, adap->fe, tun_i2c, &stk7700p_mt2060_config,
+		st->mt2060_if1[0]) == NULL ? -ENODEV : 0;
 }
 
 struct usb_device_id dib0700_usb_id_table[] = {
 		{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7700P) },
+		{ USB_DEVICE(USB_VID_DIBCOM,    USB_PID_DIBCOM_STK7700P_PC) },
+
 		{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
 		{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
 		{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
 		{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
+		{ USB_DEVICE(USB_VID_COMPRO,    USB_PID_COMPRO_VIDEOMATE_U500) },
+		{ USB_DEVICE(USB_VID_UNIWILL,   USB_PID_UNIWILL_STK7700P) },
+		{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
+		{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
+		{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
 		{ }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -167,20 +321,32 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			},
 		},
 
-		.num_device_descs = 3,
+		.num_device_descs = 6,
 		.devices = {
 			{   "DiBcom STK7700P reference design",
-				{ &dib0700_usb_id_table[0], NULL },
+				{ &dib0700_usb_id_table[0], &dib0700_usb_id_table[1] },
 				{ NULL },
 			},
 			{   "Hauppauge Nova-T Stick",
-				{ &dib0700_usb_id_table[3], NULL },
+				{ &dib0700_usb_id_table[4], &dib0700_usb_id_table[9], NULL },
 				{ NULL },
 			},
 			{   "AVerMedia AVerTV DVB-T Volar",
-				{ &dib0700_usb_id_table[4], NULL },
+				{ &dib0700_usb_id_table[5], &dib0700_usb_id_table[10] },
 				{ NULL },
 			},
+			{   "Compro Videomate U500",
+				{ &dib0700_usb_id_table[6], NULL },
+				{ NULL },
+			},
+			{   "Uniwill STK7700P based (Hama and others)",
+				{ &dib0700_usb_id_table[7], NULL },
+				{ NULL },
+			},
+			{   "Leadtek Winfast DTV Dongle (STK7700P based)",
+				{ &dib0700_usb_id_table[8], NULL },
+				{ NULL },
+			}
 		}
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -202,7 +368,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 		.num_device_descs = 1,
 		.devices = {
 			{   "Hauppauge Nova-T 500 Dual DVB-T",
-				{ &dib0700_usb_id_table[1], &dib0700_usb_id_table[2], NULL },
+				{ &dib0700_usb_id_table[2], &dib0700_usb_id_table[3], NULL },
 				{ NULL },
 			},
 		}
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c
index 4fe363e4835..7a6ae8f482e 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c
@@ -163,23 +163,23 @@ static struct dvb_usb_device_properties dibusb1_1_properties = {
 			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 			.pid_filter_count = 16,
 
-	.streaming_ctrl   = dibusb_streaming_ctrl,
-	.pid_filter       = dibusb_pid_filter,
-	.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-	.frontend_attach  = dibusb_dib3000mb_frontend_attach,
-	.tuner_attach     = dibusb_tuner_probe_and_attach,
+			.streaming_ctrl   = dibusb_streaming_ctrl,
+			.pid_filter       = dibusb_pid_filter,
+			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
+			.frontend_attach  = dibusb_dib3000mb_frontend_attach,
+			.tuner_attach     = dibusb_tuner_probe_and_attach,
 
-	/* parameter for the MPEG2-data transfer */
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x02,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
+				.count = 7,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
 			.size_of_priv     = sizeof(struct dibusb_state),
 		}
 	},
@@ -248,23 +248,23 @@ static struct dvb_usb_device_properties dibusb1_1_an2235_properties = {
 			.caps = DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_ADAP_HAS_PID_FILTER,
 			.pid_filter_count = 16,
 
-	.streaming_ctrl   = dibusb_streaming_ctrl,
-	.pid_filter       = dibusb_pid_filter,
-	.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-	.frontend_attach  = dibusb_dib3000mb_frontend_attach,
-	.tuner_attach     = dibusb_tuner_probe_and_attach,
+			.streaming_ctrl   = dibusb_streaming_ctrl,
+			.pid_filter       = dibusb_pid_filter,
+			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
+			.frontend_attach  = dibusb_dib3000mb_frontend_attach,
+			.tuner_attach     = dibusb_tuner_probe_and_attach,
 
-	/* parameter for the MPEG2-data transfer */
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x02,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
+				.count = 7,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
 			.size_of_priv     = sizeof(struct dibusb_state),
 		},
 	},
@@ -312,22 +312,23 @@ static struct dvb_usb_device_properties dibusb2_0b_properties = {
 			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 			.pid_filter_count = 16,
 
-	.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-	.pid_filter       = dibusb_pid_filter,
-	.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-	.frontend_attach  = dibusb_dib3000mb_frontend_attach,
-	.tuner_attach     = dibusb_thomson_tuner_attach,
-	/* parameter for the MPEG2-data transfer */
+			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
+			.pid_filter       = dibusb_pid_filter,
+			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
+			.frontend_attach  = dibusb_dib3000mb_frontend_attach,
+			.tuner_attach     = dibusb_thomson_tuner_attach,
+
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x06,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
+				.count = 7,
+				.endpoint = 0x06,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
 			.size_of_priv     = sizeof(struct dibusb_state),
 		}
 	},
@@ -369,22 +370,22 @@ static struct dvb_usb_device_properties artec_t1_usb2_properties = {
 			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 			.pid_filter_count = 16,
 
-	.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-	.pid_filter       = dibusb_pid_filter,
-	.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-	.frontend_attach  = dibusb_dib3000mb_frontend_attach,
-	.tuner_attach     = dibusb_tuner_probe_and_attach,
-	/* parameter for the MPEG2-data transfer */
+			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
+			.pid_filter       = dibusb_pid_filter,
+			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
+			.frontend_attach  = dibusb_dib3000mb_frontend_attach,
+			.tuner_attach     = dibusb_tuner_probe_and_attach,
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x06,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
+				.count = 7,
+				.endpoint = 0x06,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
 			.size_of_priv     = sizeof(struct dibusb_state),
 		}
 	},
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c
index a0fd37efc04..e7ea3e753d6 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mc.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c
@@ -54,23 +54,23 @@ static struct dvb_usb_device_properties dibusb_mc_properties = {
 		{
 			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 			.pid_filter_count = 32,
-	.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-	.pid_filter       = dibusb_pid_filter,
-	.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-	.frontend_attach  = dibusb_dib3000mc_frontend_attach,
-	.tuner_attach     = dibusb_dib3000mc_tuner_attach,
+			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
+			.pid_filter       = dibusb_pid_filter,
+			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
+			.frontend_attach  = dibusb_dib3000mc_frontend_attach,
+			.tuner_attach     = dibusb_dib3000mc_tuner_attach,
 
 	/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x06,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
+				.count = 7,
+				.endpoint = 0x06,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
 			.size_of_priv     = sizeof(struct dibusb_state),
 		}
 	},
diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
index 8fb34375c1f..4a198d4755b 100644
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ b/drivers/media/dvb/dvb-usb/digitv.c
@@ -274,20 +274,20 @@ static struct dvb_usb_device_properties digitv_properties = {
 	.num_adapters = 1,
 	.adapter = {
 		{
-	.frontend_attach  = digitv_frontend_attach,
-	.tuner_attach     = digitv_tuner_attach,
+			.frontend_attach  = digitv_frontend_attach,
+			.tuner_attach     = digitv_tuner_attach,
 
-	/* parameter for the MPEG2-data transfer */
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x02,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
+				.count = 7,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
 		}
 	},
 	.identify_state   = digitv_identify_state,
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c
index fa43a41d753..7dbe1432101 100644
--- a/drivers/media/dvb/dvb-usb/dtt200u.c
+++ b/drivers/media/dvb/dvb-usb/dtt200u.c
@@ -268,20 +268,20 @@ static struct dvb_usb_device_properties wt220u_zl0353_properties = {
 			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_NEED_PID_FILTERING,
 			.pid_filter_count = 15,
 
-	.streaming_ctrl  = dtt200u_streaming_ctrl,
-	.pid_filter      = dtt200u_pid_filter,
-	.frontend_attach = dtt200u_frontend_attach,
-	/* parameter for the MPEG2-data transfer */
+			.streaming_ctrl  = dtt200u_streaming_ctrl,
+			.pid_filter      = dtt200u_pid_filter,
+			.frontend_attach = dtt200u_frontend_attach,
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x02,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
+				.count = 7,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
 		}
 	},
 	.power_ctrl      = dtt200u_power_ctrl,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 4d6b069536c..299382dcb81 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -33,6 +33,7 @@
 #define USB_VID_VISIONPLUS			0x13d3
 #define USB_VID_TWINHAN				0x1822
 #define USB_VID_ULTIMA_ELECTRONIC		0x05d8
+#define USB_VID_UNIWILL				0x1584
 #define USB_VID_WIDEVIEW			0x14aa
 
 /* Product IDs */
@@ -46,6 +47,7 @@
 #define USB_PID_COMPRO_DVBU2000_WARM			0xd001
 #define USB_PID_COMPRO_DVBU2000_UNK_COLD		0x010c
 #define USB_PID_COMPRO_DVBU2000_UNK_WARM		0x010d
+#define USB_PID_COMPRO_VIDEOMATE_U500			0x1e78
 #define USB_PID_DIBCOM_HOOK_DEFAULT			0x0064
 #define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM		0x0065
 #define USB_PID_DIBCOM_MOD3000_COLD			0x0bb8
@@ -53,7 +55,9 @@
 #define USB_PID_DIBCOM_MOD3001_COLD			0x0bc6
 #define USB_PID_DIBCOM_MOD3001_WARM			0x0bc7
 #define USB_PID_DIBCOM_STK7700P				0x1e14
+#define USB_PID_DIBCOM_STK7700P_PC			0x1e78
 #define USB_PID_DIBCOM_ANCHOR_2135_COLD			0x2131
+#define USB_PID_UNIWILL_STK7700P			0x6003
 #define USB_PID_GRANDTEC_DVBT_USB_COLD			0x0fa0
 #define USB_PID_GRANDTEC_DVBT_USB_WARM			0x0fa1
 #define USB_PID_KWORLD_VSTREAM_COLD			0x17de
@@ -97,7 +101,9 @@
 #define USB_PID_HAUPPAUGE_NOVA_T_500			0x9941
 #define USB_PID_HAUPPAUGE_NOVA_T_500_2			0x9950
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK			0x7050
-#define USB_PID_AVERMEDIA_VOLAR				0x1234
+#define USB_PID_HAUPPAUGE_NOVA_T_STICK_2		0x7060
+#define USB_PID_AVERMEDIA_VOLAR				0xa807
+#define USB_PID_AVERMEDIA_VOLAR_2			0xb808
 #define USB_PID_NEBULA_DIGITV				0x0201
 #define USB_PID_DVICO_BLUEBIRD_LGDT			0xd820
 #define USB_PID_DVICO_BLUEBIRD_LG064F_COLD		0xd500
@@ -110,8 +116,8 @@
 #define USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM		0xdb51
 #define USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD		0xdb58
 #define USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM		0xdb59
-#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD	0xdb54
-#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM	0xdb55
+#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD		0xdb54
+#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM		0xdb55
 #define USB_PID_MEDION_MD95700				0x0932
 #define USB_PID_KYE_DVB_T_COLD				0x701e
 #define USB_PID_KYE_DVB_T_WARM				0x701f
@@ -125,7 +131,9 @@
 #define USB_PID_GRANDTEC_DVBT_USB2_WARM			0x0bc7
 #define USB_PID_WINFAST_DTV_DONGLE_COLD			0x6025
 #define USB_PID_WINFAST_DTV_DONGLE_WARM			0x6026
+#define USB_PID_WINFAST_DTV_DONGLE_STK7700P		0x6f00
 #define USB_PID_GENPIX_8PSK_COLD			0x0200
 #define USB_PID_GENPIX_8PSK_WARM			0x0201
 
+
 #endif
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index 0a3a0b6c235..19ff5978bc9 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -13,9 +13,10 @@
  *
  * TODO: Fix the repeat rate of the input device.
  */
-static void dvb_usb_read_remote_control(void *data)
+static void dvb_usb_read_remote_control(struct work_struct *work)
 {
-	struct dvb_usb_device *d = data;
+	struct dvb_usb_device *d =
+		container_of(work, struct dvb_usb_device, rc_query_work.work);
 	u32 event;
 	int state;
 
@@ -89,7 +90,9 @@ schedule:
 
 int dvb_usb_remote_init(struct dvb_usb_device *d)
 {
+	struct input_dev *input_dev;
 	int i;
+	int err;
 
 	if (d->props.rc_key_map == NULL ||
 		d->props.rc_query == NULL ||
@@ -99,23 +102,24 @@ int dvb_usb_remote_init(struct dvb_usb_device *d)
 	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
 	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
 
-	d->rc_input_dev = input_allocate_device();
-	if (!d->rc_input_dev)
+	input_dev = input_allocate_device();
+	if (!input_dev)
 		return -ENOMEM;
 
-	d->rc_input_dev->evbit[0] = BIT(EV_KEY);
-	d->rc_input_dev->keycodesize = sizeof(unsigned char);
-	d->rc_input_dev->keycodemax = KEY_MAX;
-	d->rc_input_dev->name = "IR-receiver inside an USB DVB receiver";
-	d->rc_input_dev->phys = d->rc_phys;
-	usb_to_input_id(d->udev, &d->rc_input_dev->id);
-	d->rc_input_dev->cdev.dev = &d->udev->dev;
+	input_dev->evbit[0] = BIT(EV_KEY);
+	input_dev->keycodesize = sizeof(unsigned char);
+	input_dev->keycodemax = KEY_MAX;
+	input_dev->name = "IR-receiver inside an USB DVB receiver";
+	input_dev->phys = d->rc_phys;
+	usb_to_input_id(d->udev, &input_dev->id);
+	input_dev->cdev.dev = &d->udev->dev;
 
 	/* set the bits for the keys */
 	deb_rc("key map size: %d\n", d->props.rc_key_map_size);
 	for (i = 0; i < d->props.rc_key_map_size; i++) {
-		deb_rc("setting bit for event %d item %d\n",d->props.rc_key_map[i].event, i);
-		set_bit(d->props.rc_key_map[i].event, d->rc_input_dev->keybit);
+		deb_rc("setting bit for event %d item %d\n",
+			d->props.rc_key_map[i].event, i);
+		set_bit(d->props.rc_key_map[i].event, input_dev->keybit);
 	}
 
 	/* Start the remote-control polling. */
@@ -123,12 +127,18 @@ int dvb_usb_remote_init(struct dvb_usb_device *d)
 		d->props.rc_interval = 100; /* default */
 
 	/* setting these two values to non-zero, we have to manage key repeats */
-	d->rc_input_dev->rep[REP_PERIOD] = d->props.rc_interval;
-	d->rc_input_dev->rep[REP_DELAY]  = d->props.rc_interval + 150;
+	input_dev->rep[REP_PERIOD] = d->props.rc_interval;
+	input_dev->rep[REP_DELAY]  = d->props.rc_interval + 150;
 
-	input_register_device(d->rc_input_dev);
+	err = input_register_device(input_dev);
+	if (err) {
+		input_free_device(input_dev);
+		return err;
+	}
+
+	d->rc_input_dev = input_dev;
 
-	INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d);
+	INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
 
 	info("schedule remote query interval to %d msecs.", d->props.rc_interval);
 	schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval));
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 376c45a8e77..0d721731a52 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -369,7 +369,7 @@ struct dvb_usb_device {
 	/* remote control */
 	struct input_dev *rc_input_dev;
 	char rc_phys[64];
-	struct work_struct rc_query_work;
+	struct delayed_work rc_query_work;
 	u32 last_event;
 	int last_state;
 
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
index 7375eb20166..518d67fca5e 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -194,19 +194,19 @@ static struct dvb_usb_device_properties gp8psk_properties = {
 	.num_adapters = 1,
 	.adapter = {
 		{
-	.streaming_ctrl   = gp8psk_streaming_ctrl,
-	.frontend_attach  = gp8psk_frontend_attach,
-	/* parameter for the MPEG2-data transfer */
+			.streaming_ctrl   = gp8psk_streaming_ctrl,
+			.frontend_attach  = gp8psk_frontend_attach,
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x82,
-		.u = {
-			.bulk = {
-				.buffersize = 8192,
-			}
-		}
-	},
+				.count = 7,
+				.endpoint = 0x82,
+				.u = {
+					.bulk = {
+						.buffersize = 8192,
+					}
+				}
+			},
 		}
 	},
 	.power_ctrl       = gp8psk_power_ctrl,
diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
index a58874c790b..d48622e76b1 100644
--- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
@@ -163,23 +163,23 @@ static struct dvb_usb_device_properties nova_t_properties = {
 			.caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
 			.pid_filter_count = 32,
 
-	.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-	.pid_filter       = dibusb_pid_filter,
-	.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
-	.frontend_attach  = dibusb_dib3000mc_frontend_attach,
-	.tuner_attach     = dibusb_dib3000mc_tuner_attach,
-
-	/* parameter for the MPEG2-data transfer */
-			.stream = {
-				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x06,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
+			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
+			.pid_filter       = dibusb_pid_filter,
+			.pid_filter_ctrl  = dibusb_pid_filter_ctrl,
+			.frontend_attach  = dibusb_dib3000mc_frontend_attach,
+			.tuner_attach     = dibusb_dib3000mc_tuner_attach,
+
+			/* parameter for the MPEG2-data transfer */
+					.stream = {
+						.type = USB_BULK,
+				.count = 7,
+				.endpoint = 0x06,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
 
 			.size_of_priv     = sizeof(struct dibusb_state),
 		}
diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c
new file mode 100644
index 00000000000..95d29976ed7
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/ttusb2.c
@@ -0,0 +1,270 @@
+/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
+ * (e.g. Pinnacle 400e DVB-S USB2.0).
+ *
+ * The Pinnacle 400e uses the same protocol as the Technotrend USB1.1 boxes.
+ *
+ * TDA8263 + TDA10086
+ *
+ * I2C addresses:
+ * 0x08 - LNBP21PD   - LNB power supply
+ * 0x0e - TDA10086   - Demodulator
+ * 0x50 - FX2 eeprom
+ * 0x60 - TDA8263    - Tuner
+ * 0x78 ???
+ *
+ * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
+ * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
+ * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.org>
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the Free
+ *	Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#define DVB_USB_LOG_PREFIX "ttusb2"
+#include "dvb-usb.h"
+
+#include "ttusb2.h"
+
+#include "tda826x.h"
+#include "tda10086.h"
+#include "lnbp21.h"
+
+/* debug */
+static int dvb_usb_ttusb2_debug;
+#define deb_info(args...)   dprintk(dvb_usb_ttusb2_debug,0x01,args)
+module_param_named(debug,dvb_usb_ttusb2_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS);
+
+struct ttusb2_state {
+	u8 id;
+};
+
+static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd,
+		u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+	struct ttusb2_state *st = d->priv;
+	u8 s[wlen+4],r[64] = { 0 };
+	int ret = 0;
+
+	memset(s,0,wlen+4);
+
+	s[0] = 0xaa;
+	s[1] = ++st->id;
+	s[2] = cmd;
+	s[3] = wlen;
+	memcpy(&s[4],wbuf,wlen);
+
+	ret = dvb_usb_generic_rw(d, s, wlen+4, r, 64, 0);
+
+	if (ret  != 0 ||
+		r[0] != 0x55 ||
+		r[1] != s[1] ||
+		r[2] != cmd ||
+		(rlen > 0 && r[3] != rlen)) {
+		warn("there might have been an error during control message transfer. (rlen = %d, was %d)",rlen,r[3]);
+		return -EIO;
+	}
+
+	if (rlen > 0)
+		memcpy(rbuf, &r[4], rlen);
+
+	return 0;
+}
+
+static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num)
+{
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	static u8 obuf[60], ibuf[60];
+	int i,read;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	if (num > 2)
+		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
+
+	for (i = 0; i < num; i++) {
+		read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
+
+		obuf[0] = (msg[i].addr << 1) | read;
+		obuf[1] = msg[i].len;
+
+		/* read request */
+		if (read)
+			obuf[2] = msg[i+1].len;
+		else
+			obuf[2] = 0;
+
+		memcpy(&obuf[3],msg[i].buf,msg[i].len);
+
+		if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) {
+			err("i2c transfer failed.");
+			break;
+		}
+
+		if (read) {
+			memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len);
+			i++;
+		}
+	}
+
+	mutex_unlock(&d->i2c_mutex);
+	return i;
+}
+
+static u32 ttusb2_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm ttusb2_i2c_algo = {
+	.master_xfer   = ttusb2_i2c_xfer,
+	.functionality = ttusb2_i2c_func,
+};
+
+/* Callbacks for DVB USB */
+static int ttusb2_identify_state (struct usb_device *udev, struct
+		dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
+		int *cold)
+{
+	*cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0;
+	return 0;
+}
+
+static int ttusb2_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	u8 b = onoff;
+	ttusb2_msg(d, CMD_POWER, &b, 0, NULL, 0);
+	return ttusb2_msg(d, CMD_POWER, &b, 1, NULL, 0);
+}
+
+
+static struct tda10086_config tda10086_config = {
+	.demod_address = 0x0e,
+	.invert = 0,
+};
+
+static int ttusb2_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	if (usb_set_interface(adap->dev->udev,0,3) < 0)
+		err("set interface to alts=3 failed");
+
+	if ((adap->fe = dvb_attach(tda10086_attach, &tda10086_config, &adap->dev->i2c_adap)) == NULL) {
+		deb_info("TDA10086 attach failed\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int ttusb2_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	if (dvb_attach(tda826x_attach, adap->fe, 0x60, &adap->dev->i2c_adap, 0) == NULL) {
+		deb_info("TDA8263 attach failed\n");
+		return -ENODEV;
+	}
+
+	if (dvb_attach(lnbp21_attach, adap->fe, &adap->dev->i2c_adap, 0, 0) == NULL) {
+		deb_info("LNBP21 attach failed\n");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+/* DVB USB Driver stuff */
+static struct dvb_usb_device_properties ttusb2_properties;
+
+static int ttusb2_probe(struct usb_interface *intf,
+		const struct usb_device_id *id)
+{
+	return dvb_usb_device_init(intf,&ttusb2_properties,THIS_MODULE,NULL);
+}
+
+static struct usb_device_id ttusb2_table [] = {
+		{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PCTV_400E) },
+		{}		/* Terminating entry */
+};
+MODULE_DEVICE_TABLE (usb, ttusb2_table);
+
+static struct dvb_usb_device_properties ttusb2_properties = {
+	.caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+	.usb_ctrl = CYPRESS_FX2,
+	.firmware = "dvb-usb-pctv-400e-01.fw",
+
+	.size_of_priv = sizeof(struct ttusb2_state),
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.streaming_ctrl   = NULL, // ttusb2_streaming_ctrl,
+
+			.frontend_attach  = ttusb2_frontend_attach,
+			.tuner_attach     = ttusb2_tuner_attach,
+
+			/* parameter for the MPEG2-data transfer */
+			.stream = {
+				.type = USB_ISOC,
+				.count = 5,
+				.endpoint = 0x02,
+				.u = {
+					.isoc = {
+						.framesperurb = 4,
+						.framesize = 940,
+						.interval = 1,
+					}
+				}
+			}
+		}
+	},
+
+	.power_ctrl       = ttusb2_power_ctrl,
+	.identify_state   = ttusb2_identify_state,
+
+	.i2c_algo         = &ttusb2_i2c_algo,
+
+	.generic_bulk_ctrl_endpoint = 0x01,
+
+	.num_device_descs = 1,
+	.devices = {
+		{   "Pinnacle 400e DVB-S USB2.0",
+			{ &ttusb2_table[0], NULL },
+			{ NULL },
+		},
+	}
+};
+
+static struct usb_driver ttusb2_driver = {
+	.name		= "dvb_usb_ttusb2",
+	.probe		= ttusb2_probe,
+	.disconnect = dvb_usb_device_exit,
+	.id_table	= ttusb2_table,
+};
+
+/* module stuff */
+static int __init ttusb2_module_init(void)
+{
+	int result;
+	if ((result = usb_register(&ttusb2_driver))) {
+		err("usb_register failed. Error number %d",result);
+		return result;
+	}
+
+	return 0;
+}
+
+static void __exit ttusb2_module_exit(void)
+{
+	/* deregister this driver from the USB subsystem */
+	usb_deregister(&ttusb2_driver);
+}
+
+module_init (ttusb2_module_init);
+module_exit (ttusb2_module_exit);
+
+MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_DESCRIPTION("Driver for Pinnacle PCTV 400e DVB-S USB2.0");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/ttusb2.h b/drivers/media/dvb/dvb-usb/ttusb2.h
new file mode 100644
index 00000000000..52a63af4089
--- /dev/null
+++ b/drivers/media/dvb/dvb-usb/ttusb2.h
@@ -0,0 +1,70 @@
+/* DVB USB compliant linux driver for Technotrend DVB USB boxes and clones
+ * (e.g. Pinnacle 400e DVB-S USB2.0).
+ *
+ * Copyright (c) 2002 Holger Waechtler <holger@convergence.de>
+ * Copyright (c) 2003 Felix Domke <tmbinc@elitedvb.net>
+ * Copyright (C) 2005-6 Patrick Boettcher <pb@linuxtv.de>
+ *
+ *	This program is free software; you can redistribute it and/or modify it
+ *	under the terms of the GNU General Public License as published by the Free
+ *	Software Foundation, version 2.
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_TTUSB2_H_
+#define _DVB_USB_TTUSB2_H_
+
+/* TTUSB protocol
+ *
+ * always to messages (out/in)
+ * out message:
+ * 0xaa <id> <cmdbyte> <datalen> <data...>
+ *
+ * in message (complete block is always 0x40 bytes long)
+ * 0x55 <id> <cmdbyte> <datalen> <data...>
+ *
+ * id is incremented for each transaction
+ */
+
+#define CMD_DSP_DOWNLOAD    0x13
+/* out data: <byte>[28]
+ * last block must be empty */
+
+#define CMD_DSP_BOOT        0x14
+/* out data: nothing */
+
+#define CMD_POWER           0x15
+/* out data: <on=1/off=0> */
+
+#define CMD_LNB             0x16
+/* out data: <power=1> <18V=0,13V=1> <tone> <??=1> <??=1> */
+
+#define CMD_GET_VERSION     0x17
+/* in  data: <version_byte>[5] */
+
+#define CMD_DISEQC          0x18
+/* out data: <master=0xff/burst=??> <cmdlen> <cmdbytes>[cmdlen] */
+
+#define CMD_PID_ENABLE      0x22
+/* out data: <index> <type: ts=1/sec=2> <pid msb> <pid lsb> */
+
+#define CMD_PID_DISABLE     0x23
+/* out data: <index> */
+
+#define CMD_FILTER_ENABLE   0x24
+/* out data: <index> <pid_idx> <filter>[12] <mask>[12] */
+
+#define CMD_FILTER_DISABLE  0x25
+/* out data: <index> */
+
+#define CMD_GET_DSP_VERSION 0x26
+/* in  data: <version_byte>[28] */
+
+#define CMD_I2C_XFER        0x31
+/* out data: <addr << 1> <sndlen> <rcvlen> <data>[sndlen]
+ * in  data: <addr << 1> <sndlen> <rcvlen> <data>[rcvlen] */
+
+#define CMD_I2C_BITRATE     0x32
+/* out data: <default=0> */
+
+#endif
diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c
index f9941ea88b3..f77b48f7658 100644
--- a/drivers/media/dvb/dvb-usb/umt-010.c
+++ b/drivers/media/dvb/dvb-usb/umt-010.c
@@ -99,21 +99,21 @@ static struct dvb_usb_device_properties umt_properties = {
 	.num_adapters = 1,
 	.adapter = {
 		{
-	.streaming_ctrl   = dibusb2_0_streaming_ctrl,
-	.frontend_attach  = umt_mt352_frontend_attach,
-	.tuner_attach     = umt_tuner_attach,
+			.streaming_ctrl   = dibusb2_0_streaming_ctrl,
+			.frontend_attach  = umt_mt352_frontend_attach,
+			.tuner_attach     = umt_tuner_attach,
 
-	/* parameter for the MPEG2-data transfer */
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 20,
-		.endpoint = 0x06,
-		.u = {
-			.bulk = {
-				.buffersize = 512,
-			}
-		}
-	},
+				.count = 20,
+				.endpoint = 0x06,
+				.u = {
+					.bulk = {
+						.buffersize = 512,
+					}
+				}
+			},
 
 			.size_of_priv     = sizeof(struct dibusb_state),
 		}
diff --git a/drivers/media/dvb/dvb-usb/usb-urb.c b/drivers/media/dvb/dvb-usb/usb-urb.c
index 78035ee824c..397f51a7b2a 100644
--- a/drivers/media/dvb/dvb-usb/usb-urb.c
+++ b/drivers/media/dvb/dvb-usb/usb-urb.c
@@ -116,7 +116,7 @@ static int usb_allocate_stream_buffers(struct usb_data_stream *stream, int num,
 	for (stream->buf_num = 0; stream->buf_num < num; stream->buf_num++) {
 		deb_mem("allocating buffer %d\n",stream->buf_num);
 		if (( stream->buf_list[stream->buf_num] =
-					usb_buffer_alloc(stream->udev, size, SLAB_ATOMIC,
+					usb_buffer_alloc(stream->udev, size, GFP_ATOMIC,
 					&stream->dma_addr[stream->buf_num]) ) == NULL) {
 			deb_mem("not enough memory for urb-buffer allocation.\n");
 			usb_free_stream_buffers(stream);
diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c
index 02bd61aaac6..16533b31a82 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.c
+++ b/drivers/media/dvb/dvb-usb/vp702x.c
@@ -275,22 +275,22 @@ static struct dvb_usb_device_properties vp702x_properties = {
 			.caps             = DVB_USB_ADAP_RECEIVES_204_BYTE_TS,
 
 			.streaming_ctrl   = vp702x_streaming_ctrl,
-	.frontend_attach  = vp702x_frontend_attach,
+			.frontend_attach  = vp702x_frontend_attach,
 
-	/* parameter for the MPEG2-data transfer */
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
 				.count = 10,
-		.endpoint = 0x02,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
 			.size_of_priv     = sizeof(struct vp702x_state),
 		}
-		},
+	},
 	.read_mac_address = vp702x_read_mac_addr,
 
 	.rc_key_map       = vp702x_rc_keys,
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index b4cf002703a..69a46b3607a 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -125,7 +125,25 @@ static struct dvb_usb_rc_key vp7045_rc_keys[] = {
 	{ 0x00, 0x00, KEY_TAB }, /* Tab */
 	{ 0x00, 0x48, KEY_INFO }, /* Preview */
 	{ 0x00, 0x04, KEY_LIST }, /* RecordList */
-	{ 0x00, 0x0f, KEY_TEXT } /* Teletext */
+	{ 0x00, 0x0f, KEY_TEXT }, /* Teletext */
+	{ 0x00, 0x41, KEY_PREVIOUSSONG },
+	{ 0x00, 0x42, KEY_NEXTSONG },
+	{ 0x00, 0x4b, KEY_UP },
+	{ 0x00, 0x51, KEY_DOWN },
+	{ 0x00, 0x4e, KEY_LEFT },
+	{ 0x00, 0x52, KEY_RIGHT },
+	{ 0x00, 0x4f, KEY_ENTER },
+	{ 0x00, 0x13, KEY_CANCEL },
+	{ 0x00, 0x4a, KEY_CLEAR },
+	{ 0x00, 0x54, KEY_PRINT }, /* Capture */
+	{ 0x00, 0x43, KEY_SUBTITLE }, /* Subtitle/CC */
+	{ 0x00, 0x08, KEY_VIDEO }, /* A/V */
+	{ 0x00, 0x07, KEY_SLEEP }, /* Hibernate */
+	{ 0x00, 0x45, KEY_ZOOM }, /* Zoom+ */
+	{ 0x00, 0x18, KEY_RED},
+	{ 0x00, 0x53, KEY_GREEN},
+	{ 0x00, 0x5e, KEY_YELLOW},
+	{ 0x00, 0x5f, KEY_BLUE}
 };
 
 static int vp7045_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
@@ -217,18 +235,18 @@ static struct dvb_usb_device_properties vp7045_properties = {
 	.num_adapters = 1,
 	.adapter = {
 		{
-	.frontend_attach  = vp7045_frontend_attach,
-	/* parameter for the MPEG2-data transfer */
+			.frontend_attach  = vp7045_frontend_attach,
+			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
-		.count = 7,
-		.endpoint = 0x02,
-		.u = {
-			.bulk = {
-				.buffersize = 4096,
-			}
-		}
-	},
+				.count = 7,
+				.endpoint = 0x02,
+				.u = {
+					.bulk = {
+						.buffersize = 4096,
+					}
+				}
+			},
 		}
 	},
 	.power_ctrl       = vp7045_power_ctrl,
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 080fa257a0b..af314bb1dca 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -172,6 +172,22 @@ config DVB_DIB3000MC
 	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
 	  to support this frontend.
 
+config DVB_DIB7000M
+	tristate "DiBcom 7000MA/MB/PA/PB/MC"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+	  to support this frontend.
+
+config DVB_DIB7000P
+	tristate "DiBcom 7000PC"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
+	  to support this frontend.
+
 comment "DVB-C (cable) frontends"
 	depends on DVB_CORE
 
@@ -276,9 +292,19 @@ config DVB_TDA826X
 
 config DVB_TUNER_MT2060
 	tristate "Microtune MT2060 silicon IF tuner"
+	depends on I2C
+	default m if DVB_FE_CUSTOMISE
 	help
 	  A driver for the silicon IF tuner MT2060 from Microtune.
 
+config DVB_TUNER_LGH06XF
+	tristate "LG TDVS-H06xF ATSC tuner"
+	depends on DVB_CORE && I2C
+	select DVB_PLL
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A driver for the LG TDVS-H06xF ATSC tuner family.
+
 comment "Miscellaneous devices"
 	depends on DVB_CORE
 
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index dce9cf0c75c..3fa6e5d32a9 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -13,6 +13,8 @@ obj-$(CONFIG_DVB_TDA8083) += tda8083.o
 obj-$(CONFIG_DVB_L64781) += l64781.o
 obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o
 obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o
+obj-$(CONFIG_DVB_DIB7000M) += dib7000m.o dibx000_common.o
+obj-$(CONFIG_DVB_DIB7000P) += dib7000p.o dibx000_common.o
 obj-$(CONFIG_DVB_MT312) += mt312.o
 obj-$(CONFIG_DVB_VES1820) += ves1820.o
 obj-$(CONFIG_DVB_VES1X93) += ves1x93.o
@@ -37,3 +39,4 @@ obj-$(CONFIG_DVB_TDA10086) += tda10086.o
 obj-$(CONFIG_DVB_TDA826X) += tda826x.o
 obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
 obj-$(CONFIG_DVB_TUA6100) += tua6100.o
+obj-$(CONFIG_DVB_TUNER_LGH06XF) += lgh06xf.o
diff --git a/drivers/media/dvb/frontends/bcm3510.h b/drivers/media/dvb/frontends/bcm3510.h
index 6dfa839a702..7e4f95e1734 100644
--- a/drivers/media/dvb/frontends/bcm3510.h
+++ b/drivers/media/dvb/frontends/bcm3510.h
@@ -34,7 +34,7 @@ struct bcm3510_config
 	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
 };
 
-#if defined(CONFIG_DVB_BCM3510) || defined(CONFIG_DVB_BCM3510_MODULE)
+#if defined(CONFIG_DVB_BCM3510) || (defined(CONFIG_DVB_BCM3510_MODULE) && defined(MODULE))
 extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/cx22700.h b/drivers/media/dvb/frontends/cx22700.h
index 10286cc29fb..7ac33690cdc 100644
--- a/drivers/media/dvb/frontends/cx22700.h
+++ b/drivers/media/dvb/frontends/cx22700.h
@@ -31,7 +31,7 @@ struct cx22700_config
 	u8 demod_address;
 };
 
-#if defined(CONFIG_DVB_CX22700) || defined(CONFIG_DVB_CX22700_MODULE)
+#if defined(CONFIG_DVB_CX22700) || (defined(CONFIG_DVB_CX22700_MODULE) && defined(MODULE))
 extern struct dvb_frontend* cx22700_attach(const struct cx22700_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h
index bc217ddf02c..9cd64da6ee4 100644
--- a/drivers/media/dvb/frontends/cx22702.h
+++ b/drivers/media/dvb/frontends/cx22702.h
@@ -41,7 +41,7 @@ struct cx22702_config
 	u8 output_mode;
 };
 
-#if defined(CONFIG_DVB_CX22702) || defined(CONFIG_DVB_CX22702_MODULE)
+#if defined(CONFIG_DVB_CX22702) || (defined(CONFIG_DVB_CX22702_MODULE) && defined(MODULE))
 extern struct dvb_frontend* cx22702_attach(const struct cx22702_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/cx24110.h b/drivers/media/dvb/frontends/cx24110.h
index c9d5ae250eb..0ca3af4db51 100644
--- a/drivers/media/dvb/frontends/cx24110.h
+++ b/drivers/media/dvb/frontends/cx24110.h
@@ -41,7 +41,7 @@ static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val) {
 	return r;
 }
 
-#if defined(CONFIG_DVB_CX24110) || defined(CONFIG_DVB_CX24110_MODULE)
+#if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE))
 extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb/frontends/cx24123.h
index 57a1dae1dc4..84f9e4f5c15 100644
--- a/drivers/media/dvb/frontends/cx24123.h
+++ b/drivers/media/dvb/frontends/cx24123.h
@@ -35,7 +35,7 @@ struct cx24123_config
 	int lnb_polarity;
 };
 
-#if defined(CONFIG_DVB_CX24123) || defined(CONFIG_DVB_CX24123_MODULE)
+#if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) && defined(MODULE))
 extern struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb/frontends/dib3000.h
index 0caac3f0f27..a6d3854a67b 100644
--- a/drivers/media/dvb/frontends/dib3000.h
+++ b/drivers/media/dvb/frontends/dib3000.h
@@ -41,7 +41,7 @@ struct dib_fe_xfer_ops
 	int (*tuner_pass_ctrl)(struct dvb_frontend *fe, int onoff, u8 pll_ctrl);
 };
 
-#if defined(CONFIG_DVB_DIB3000MB) || defined(CONFIG_DVB_DIB3000MB_MODULE)
+#if defined(CONFIG_DVB_DIB3000MB) || (defined(CONFIG_DVB_DIB3000MB_MODULE) && defined(MODULE))
 extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config,
 					     struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops);
 #else
diff --git a/drivers/media/dvb/frontends/dib3000mc.c b/drivers/media/dvb/frontends/dib3000mc.c
index 3561a777568..5da66178006 100644
--- a/drivers/media/dvb/frontends/dib3000mc.c
+++ b/drivers/media/dvb/frontends/dib3000mc.c
@@ -511,16 +511,11 @@ static int dib3000mc_autosearch_start(struct dvb_frontend *demod, struct dibx000
 
 
 	/* a channel for autosearch */
-	reg = 0;
-	if (chan->nfft == -1 && chan->guard == -1) reg = 7;
-	if (chan->nfft == -1 && chan->guard != -1) reg = 2;
-	if (chan->nfft != -1 && chan->guard == -1) reg = 3;
-
 	fchan.nfft = 1; fchan.guard = 0; fchan.nqam = 2;
 	fchan.vit_alpha = 1; fchan.vit_code_rate_hp = 2; fchan.vit_code_rate_lp = 2;
 	fchan.vit_hrch = 0; fchan.vit_select_hp = 1;
 
-	dib3000mc_set_channel_cfg(state, &fchan, reg);
+	dib3000mc_set_channel_cfg(state, &fchan, 7);
 
 	reg = dib3000mc_read_word(state, 0);
 	dib3000mc_write_word(state, 0, reg | (1 << 8));
diff --git a/drivers/media/dvb/frontends/dib3000mc.h b/drivers/media/dvb/frontends/dib3000mc.h
index 0d6fdef7753..72d4757601d 100644
--- a/drivers/media/dvb/frontends/dib3000mc.h
+++ b/drivers/media/dvb/frontends/dib3000mc.h
@@ -39,7 +39,7 @@ struct dib3000mc_config {
 #define DEFAULT_DIB3000MC_I2C_ADDRESS 16
 #define DEFAULT_DIB3000P_I2C_ADDRESS  24
 
-#if defined(CONFIG_DVB_DIB3000MC) || defined(CONFIG_DVB_DIB3000MC_MODULE)
+#if defined(CONFIG_DVB_DIB3000MC) || (defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE))
 extern struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg);
 #else
 static inline struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg)
diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c
new file mode 100644
index 00000000000..f5d40aa3d27
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib7000m.c
@@ -0,0 +1,1191 @@
+/*
+ * Linux-DVB Driver for DiBcom's DiB7000M and
+ *              first generation DiB7000P-demodulator-family.
+ *
+ * Copyright (C) 2005-6 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+
+#include "dib7000m.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000M:"); printk(args); } } while (0)
+
+struct dib7000m_state {
+	struct dvb_frontend demod;
+    struct dib7000m_config cfg;
+
+	u8 i2c_addr;
+	struct i2c_adapter   *i2c_adap;
+
+	struct dibx000_i2c_master i2c_master;
+
+/* offset is 1 in case of the 7000MC */
+	u8 reg_offs;
+
+	u16 wbd_ref;
+
+	u8 current_band;
+	fe_bandwidth_t current_bandwidth;
+	struct dibx000_agc_config *current_agc;
+	u32 timf;
+
+	u16 revision;
+};
+
+enum dib7000m_power_mode {
+	DIB7000M_POWER_ALL = 0,
+
+	DIB7000M_POWER_NO,
+	DIB7000M_POWER_INTERF_ANALOG_AGC,
+	DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD,
+	DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD,
+	DIB7000M_POWER_INTERFACE_ONLY,
+};
+
+static u16 dib7000m_read_word(struct dib7000m_state *state, u16 reg)
+{
+	u8 wb[2] = { (reg >> 8) | 0x80, reg & 0xff };
+	u8 rb[2];
+	struct i2c_msg msg[2] = {
+		{ .addr = state->i2c_addr >> 1, .flags = 0,        .buf = wb, .len = 2 },
+		{ .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
+	};
+
+	if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
+		dprintk("i2c read error on %d\n",reg);
+
+	return (rb[0] << 8) | rb[1];
+}
+
+static int dib7000m_write_word(struct dib7000m_state *state, u16 reg, u16 val)
+{
+	u8 b[4] = {
+		(reg >> 8) & 0xff, reg & 0xff,
+		(val >> 8) & 0xff, val & 0xff,
+	};
+	struct i2c_msg msg = {
+		.addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
+	};
+	return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
+}
+static int dib7000m_set_output_mode(struct dib7000m_state *state, int mode)
+{
+	int    ret = 0;
+	u16 outreg, fifo_threshold, smo_mode,
+		sram = 0x0005; /* by default SRAM output is disabled */
+
+	outreg = 0;
+	fifo_threshold = 1792;
+	smo_mode = (dib7000m_read_word(state, 294 + state->reg_offs) & 0x0010) | (1 << 1);
+
+	dprintk("-I-  Setting output mode for demod %p to %d\n",
+			&state->demod, mode);
+
+	switch (mode) {
+		case OUTMODE_MPEG2_PAR_GATED_CLK:   // STBs with parallel gated clock
+			outreg = (1 << 10);  /* 0x0400 */
+			break;
+		case OUTMODE_MPEG2_PAR_CONT_CLK:    // STBs with parallel continues clock
+			outreg = (1 << 10) | (1 << 6); /* 0x0440 */
+			break;
+		case OUTMODE_MPEG2_SERIAL:          // STBs with serial input
+			outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */
+			break;
+		case OUTMODE_DIVERSITY:
+			if (state->cfg.hostbus_diversity)
+				outreg = (1 << 10) | (4 << 6); /* 0x0500 */
+			else
+				sram   |= 0x0c00;
+			break;
+		case OUTMODE_MPEG2_FIFO:            // e.g. USB feeding
+			smo_mode |= (3 << 1);
+			fifo_threshold = 512;
+			outreg = (1 << 10) | (5 << 6);
+			break;
+		case OUTMODE_HIGH_Z:  // disable
+			outreg = 0;
+			break;
+		default:
+			dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod);
+			break;
+	}
+
+	if (state->cfg.output_mpeg2_in_188_bytes)
+		smo_mode |= (1 << 5) ;
+
+	ret |= dib7000m_write_word(state,  294 + state->reg_offs, smo_mode);
+	ret |= dib7000m_write_word(state,  295 + state->reg_offs, fifo_threshold); /* synchronous fread */
+	ret |= dib7000m_write_word(state, 1795, outreg);
+	ret |= dib7000m_write_word(state, 1805, sram);
+
+	return ret;
+}
+
+static int dib7000m_set_power_mode(struct dib7000m_state *state, enum dib7000m_power_mode mode)
+{
+	/* by default everything is going to be powered off */
+	u16 reg_903 = 0xffff, reg_904 = 0xffff, reg_905 = 0xffff, reg_906  = 0x3fff;
+
+	/* now, depending on the requested mode, we power on */
+	switch (mode) {
+		/* power up everything in the demod */
+		case DIB7000M_POWER_ALL:
+			reg_903 = 0x0000; reg_904 = 0x0000; reg_905 = 0x0000; reg_906 = 0x0000;
+			break;
+
+		/* just leave power on the control-interfaces: GPIO and (I2C or SDIO or SRAM) */
+		case DIB7000M_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C or SRAM */
+			reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 2));
+			break;
+
+		case DIB7000M_POWER_INTERF_ANALOG_AGC:
+			reg_903 &= ~((1 << 15) | (1 << 14) | (1 << 11) | (1 << 10));
+			reg_905 &= ~((1 << 7) | (1 << 6) | (1 << 5) | (1 << 4) | (1 << 2));
+			reg_906 &= ~((1 << 0));
+			break;
+
+		case DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD:
+			reg_903 = 0x0000; reg_904 = 0x801f; reg_905 = 0x0000; reg_906 = 0x0000;
+			break;
+
+		case DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD:
+			reg_903 = 0x0000; reg_904 = 0x8000; reg_905 = 0x010b; reg_906 = 0x0000;
+			break;
+		case DIB7000M_POWER_NO:
+			break;
+	}
+
+	/* always power down unused parts */
+	if (!state->cfg.mobile_mode)
+		reg_904 |= (1 << 7) | (1 << 6) | (1 << 4) | (1 << 2) | (1 << 1);
+
+	/* P_sdio_select_clk = 0 on MC */
+	if (state->revision != 0x4000)
+		reg_906 <<= 1;
+
+	dib7000m_write_word(state,  903,  reg_903);
+	dib7000m_write_word(state,  904,  reg_904);
+	dib7000m_write_word(state,  905,  reg_905);
+	dib7000m_write_word(state,  906,  reg_906);
+
+	return 0;
+}
+
+static int dib7000m_set_adc_state(struct dib7000m_state *state, enum dibx000_adc_states no)
+{
+	int ret = 0;
+	u16 reg_913 = dib7000m_read_word(state, 913),
+	       reg_914 = dib7000m_read_word(state, 914);
+
+	switch (no) {
+		case DIBX000_SLOW_ADC_ON:
+			reg_914 |= (1 << 1) | (1 << 0);
+			ret |= dib7000m_write_word(state, 914, reg_914);
+			reg_914 &= ~(1 << 1);
+			break;
+
+		case DIBX000_SLOW_ADC_OFF:
+			reg_914 |=  (1 << 1) | (1 << 0);
+			break;
+
+		case DIBX000_ADC_ON:
+			if (state->revision == 0x4000) { // workaround for PA/MA
+				// power-up ADC
+				dib7000m_write_word(state, 913, 0);
+				dib7000m_write_word(state, 914, reg_914 & 0x3);
+				// power-down bandgag
+				dib7000m_write_word(state, 913, (1 << 15));
+				dib7000m_write_word(state, 914, reg_914 & 0x3);
+			}
+
+			reg_913 &= 0x0fff;
+			reg_914 &= 0x0003;
+			break;
+
+		case DIBX000_ADC_OFF: // leave the VBG voltage on
+			reg_913 |= (1 << 14) | (1 << 13) | (1 << 12);
+			reg_914 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
+			break;
+
+		case DIBX000_VBG_ENABLE:
+			reg_913 &= ~(1 << 15);
+			break;
+
+		case DIBX000_VBG_DISABLE:
+			reg_913 |= (1 << 15);
+			break;
+
+		default:
+			break;
+	}
+
+//	dprintk("-D-  913: %x, 914: %x\n", reg_913, reg_914);
+
+	ret |= dib7000m_write_word(state, 913, reg_913);
+	ret |= dib7000m_write_word(state, 914, reg_914);
+
+	return ret;
+}
+
+static int dib7000m_set_bandwidth(struct dvb_frontend *demod, u8 bw_idx)
+{
+	struct dib7000m_state *state = demod->demodulator_priv;
+	u32 timf;
+
+	// store the current bandwidth for later use
+	state->current_bandwidth = bw_idx;
+
+	if (state->timf == 0) {
+		dprintk("-D-  Using default timf\n");
+		timf = state->cfg.bw->timf;
+	} else {
+		dprintk("-D-  Using updated timf\n");
+		timf = state->timf;
+	}
+
+	timf = timf * (BW_INDEX_TO_KHZ(bw_idx) / 100) / 80;
+
+	dib7000m_write_word(state, 23, (timf >> 16) & 0xffff);
+	dib7000m_write_word(state, 24, (timf      ) & 0xffff);
+
+	return 0;
+}
+
+static int dib7000m_sad_calib(struct dib7000m_state *state)
+{
+
+/* internal */
+//	dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+	dib7000m_write_word(state, 929, (0 << 1) | (0 << 0));
+	dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096
+
+	/* do the calibration */
+	dib7000m_write_word(state, 929, (1 << 0));
+	dib7000m_write_word(state, 929, (0 << 0));
+
+	msleep(1);
+
+	return 0;
+}
+
+static void dib7000m_reset_pll_common(struct dib7000m_state *state, const struct dibx000_bandwidth_config *bw)
+{
+	dib7000m_write_word(state, 18, ((bw->internal*1000) >> 16) & 0xffff);
+	dib7000m_write_word(state, 19,  (bw->internal*1000)        & 0xffff);
+	dib7000m_write_word(state, 21,  (bw->ifreq          >> 16) & 0xffff);
+	dib7000m_write_word(state, 22,   bw->ifreq                 & 0xffff);
+
+	dib7000m_write_word(state, 928, bw->sad_cfg);
+}
+
+static void dib7000m_reset_pll(struct dib7000m_state *state)
+{
+	const struct dibx000_bandwidth_config *bw = state->cfg.bw;
+	u16 reg_907,reg_910;
+
+	/* default */
+	reg_907 = (bw->pll_bypass << 15) | (bw->modulo << 7) |
+		(bw->ADClkSrc << 6) | (bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) |
+		(bw->enable_refdiv << 1) | (0 << 0);
+	reg_910 = (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset;
+
+	// for this oscillator frequency should be 30 MHz for the Master (default values in the board_parameters give that value)
+	// this is only working only for 30 MHz crystals
+	if (!state->cfg.quartz_direct) {
+		reg_910 |= (1 << 5);  // forcing the predivider to 1
+
+		// if the previous front-end is baseband, its output frequency is 15 MHz (prev freq divided by 2)
+		if(state->cfg.input_clk_is_div_2)
+			reg_907 |= (16 << 9);
+		else // otherwise the previous front-end puts out its input (default 30MHz) - no extra division necessary
+			reg_907 |= (8 << 9);
+	} else {
+		reg_907 |= (bw->pll_ratio & 0x3f) << 9;
+		reg_910 |= (bw->pll_prediv << 5);
+	}
+
+	dib7000m_write_word(state, 910, reg_910); // pll cfg
+	dib7000m_write_word(state, 907, reg_907); // clk cfg0
+	dib7000m_write_word(state, 908, 0x0006);  // clk_cfg1
+
+	dib7000m_reset_pll_common(state, bw);
+}
+
+static void dib7000mc_reset_pll(struct dib7000m_state *state)
+{
+	const struct dibx000_bandwidth_config *bw = state->cfg.bw;
+
+	// clk_cfg0
+	dib7000m_write_word(state, 907, (bw->pll_prediv << 8) | (bw->pll_ratio << 0));
+
+	// clk_cfg1
+	//dib7000m_write_word(state, 908, (1 << 14) | (3 << 12) |(0 << 11) |
+	dib7000m_write_word(state, 908, (0 << 14) | (3 << 12) |(0 << 11) |
+			(bw->IO_CLK_en_core << 10) | (bw->bypclk_div << 5) | (bw->enable_refdiv << 4) |
+			(bw->pll_bypass << 3) | (bw->pll_range << 1) | (bw->pll_reset << 0));
+
+	// smpl_cfg
+	dib7000m_write_word(state, 910, (1 << 12) | (2 << 10) | (bw->modulo << 8) | (bw->ADClkSrc << 7));
+
+	dib7000m_reset_pll_common(state, bw);
+}
+
+static int dib7000m_reset_gpio(struct dib7000m_state *st)
+{
+	/* reset the GPIOs */
+	dprintk("-D-  gpio dir: %x: gpio val: %x, gpio pwm pos: %x\n",
+		st->cfg.gpio_dir, st->cfg.gpio_val,st->cfg.gpio_pwm_pos);
+
+	dib7000m_write_word(st, 773, st->cfg.gpio_dir);
+	dib7000m_write_word(st, 774, st->cfg.gpio_val);
+
+	/* TODO 782 is P_gpio_od */
+
+	dib7000m_write_word(st, 775, st->cfg.gpio_pwm_pos);
+
+	dib7000m_write_word(st, 780, st->cfg.pwm_freq_div);
+	return 0;
+}
+
+static int dib7000m_demod_reset(struct dib7000m_state *state)
+{
+	dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
+
+	/* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
+	dib7000m_set_adc_state(state, DIBX000_VBG_ENABLE);
+
+	/* restart all parts */
+	dib7000m_write_word(state,  898, 0xffff);
+	dib7000m_write_word(state,  899, 0xffff);
+	dib7000m_write_word(state,  900, 0xff0f);
+	dib7000m_write_word(state,  901, 0xfffc);
+
+	dib7000m_write_word(state,  898, 0);
+	dib7000m_write_word(state,  899, 0);
+	dib7000m_write_word(state,  900, 0);
+	dib7000m_write_word(state,  901, 0);
+
+	if (state->revision == 0x4000)
+		dib7000m_reset_pll(state);
+	else
+		dib7000mc_reset_pll(state);
+
+	if (dib7000m_reset_gpio(state) != 0)
+		dprintk("-E-  GPIO reset was not successful.\n");
+
+	if (dib7000m_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
+		dprintk("-E-  OUTPUT_MODE could not be resetted.\n");
+
+	/* unforce divstr regardless whether i2c enumeration was done or not */
+	dib7000m_write_word(state, 1794, dib7000m_read_word(state, 1794) & ~(1 << 1) );
+
+	dib7000m_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ);
+
+	dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON);
+	dib7000m_sad_calib(state);
+	dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_OFF);
+
+	dib7000m_set_power_mode(state, DIB7000M_POWER_INTERFACE_ONLY);
+
+	return 0;
+}
+
+static void dib7000m_restart_agc(struct dib7000m_state *state)
+{
+	// P_restart_iqc & P_restart_agc
+	dib7000m_write_word(state, 898, 0x0c00);
+	dib7000m_write_word(state, 898, 0x0000);
+}
+
+static int dib7000m_agc_soft_split(struct dib7000m_state *state)
+{
+	u16 agc,split_offset;
+
+	if(!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0)
+		return 0;
+
+	// n_agc_global
+	agc = dib7000m_read_word(state, 390);
+
+	if (agc > state->current_agc->split.min_thres)
+		split_offset = state->current_agc->split.min;
+	else if (agc < state->current_agc->split.max_thres)
+		split_offset = state->current_agc->split.max;
+	else
+		split_offset = state->current_agc->split.max *
+			(agc - state->current_agc->split.min_thres) /
+			(state->current_agc->split.max_thres - state->current_agc->split.min_thres);
+
+	dprintk("AGC split_offset: %d\n",split_offset);
+
+	// P_agc_force_split and P_agc_split_offset
+	return dib7000m_write_word(state, 103, (dib7000m_read_word(state, 103) & 0xff00) | split_offset);
+}
+
+static int dib7000m_update_lna(struct dib7000m_state *state)
+{
+	int i;
+	u16 dyn_gain;
+
+	// when there is no LNA to program return immediatly
+	if (state->cfg.update_lna == NULL)
+		return 0;
+
+	msleep(60);
+	for (i = 0; i < 20; i++) {
+		// read dyn_gain here (because it is demod-dependent and not tuner)
+		dyn_gain = dib7000m_read_word(state, 390);
+
+		dprintk("agc global: %d\n", dyn_gain);
+
+		if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
+			dib7000m_restart_agc(state);
+			msleep(60);
+		} else
+			break;
+	}
+	return 0;
+}
+
+static void dib7000m_set_agc_config(struct dib7000m_state *state, u8 band)
+{
+	struct dibx000_agc_config *agc = NULL;
+	int i;
+	if (state->current_band == band)
+		return;
+	state->current_band = band;
+
+	for (i = 0; i < state->cfg.agc_config_count; i++)
+		if (state->cfg.agc[i].band_caps & band) {
+			agc = &state->cfg.agc[i];
+			break;
+		}
+
+	if (agc == NULL) {
+		dprintk("-E-  No valid AGC configuration found for band 0x%02x\n",band);
+		return;
+	}
+
+	state->current_agc = agc;
+
+	/* AGC */
+	dib7000m_write_word(state, 72 ,  agc->setup);
+	dib7000m_write_word(state, 73 ,  agc->inv_gain);
+	dib7000m_write_word(state, 74 ,  agc->time_stabiliz);
+	dib7000m_write_word(state, 97 , (agc->alpha_level << 12) | agc->thlock);
+
+	// Demod AGC loop configuration
+	dib7000m_write_word(state, 98, (agc->alpha_mant << 5) | agc->alpha_exp);
+	dib7000m_write_word(state, 99, (agc->beta_mant  << 6) | agc->beta_exp);
+
+	dprintk("-D-  WBD: ref: %d, sel: %d, active: %d, alpha: %d\n",
+		state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
+
+	/* AGC continued */
+	if (state->wbd_ref != 0)
+		dib7000m_write_word(state, 102, state->wbd_ref);
+	else // use default
+		dib7000m_write_word(state, 102, agc->wbd_ref);
+
+	dib7000m_write_word(state, 103, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) );
+	dib7000m_write_word(state, 104,  agc->agc1_max);
+	dib7000m_write_word(state, 105,  agc->agc1_min);
+	dib7000m_write_word(state, 106,  agc->agc2_max);
+	dib7000m_write_word(state, 107,  agc->agc2_min);
+	dib7000m_write_word(state, 108, (agc->agc1_pt1 << 8) | agc->agc1_pt2 );
+	dib7000m_write_word(state, 109, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
+	dib7000m_write_word(state, 110, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
+	dib7000m_write_word(state, 111, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
+
+	if (state->revision > 0x4000) { // settings for the MC
+		dib7000m_write_word(state, 71,   agc->agc1_pt3);
+//		dprintk("-D-  929: %x %d %d\n",
+//			(dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2), agc->wbd_inv, agc->wbd_sel);
+		dib7000m_write_word(state, 929, (dib7000m_read_word(state, 929) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2));
+	} else {
+		// wrong default values
+		u16 b[9] = { 676, 696, 717, 737, 758, 778, 799, 819, 840 };
+		for (i = 0; i < 9; i++)
+			dib7000m_write_word(state, 88 + i, b[i]);
+	}
+}
+
+static void dib7000m_update_timf_freq(struct dib7000m_state *state)
+{
+	u32 timf = (dib7000m_read_word(state, 436) << 16) | dib7000m_read_word(state, 437);
+	state->timf = timf * 80 / (BW_INDEX_TO_KHZ(state->current_bandwidth) / 100);
+	dib7000m_write_word(state, 23, (u16) (timf >> 16));
+	dib7000m_write_word(state, 24, (u16) (timf & 0xffff));
+	dprintk("-D-  Updated timf_frequency: %d (default: %d)\n",state->timf, state->cfg.bw->timf);
+}
+
+static void dib7000m_set_channel(struct dib7000m_state *state, struct dibx000_ofdm_channel *ch, u8 seq)
+{
+	u16 value, est[4];
+
+	dib7000m_set_agc_config(state, BAND_OF_FREQUENCY(ch->RF_kHz));
+
+	/* nfft, guard, qam, alpha */
+	dib7000m_write_word(state, 0, (ch->nfft << 7) | (ch->guard << 5) | (ch->nqam << 3) | (ch->vit_alpha));
+	dib7000m_write_word(state, 5, (seq << 4));
+
+	/* P_dintl_native, P_dintlv_inv, P_vit_hrch, P_vit_code_rate, P_vit_select_hp */
+	value = (ch->intlv_native << 6) | (ch->vit_hrch << 4) | (ch->vit_select_hp & 0x1);
+	if (ch->vit_hrch == 0 || ch->vit_select_hp == 1)
+		value |= (ch->vit_code_rate_hp << 1);
+	else
+		value |= (ch->vit_code_rate_lp << 1);
+	dib7000m_write_word(state, 267 + state->reg_offs, value);
+
+	/* offset loop parameters */
+
+	/* P_timf_alpha = 6, P_corm_alpha=6, P_corm_thres=0x80 */
+	dib7000m_write_word(state, 26, (6 << 12) | (6 << 8) | 0x80);
+
+	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=1, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
+	dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (1 << 9) | (3 << 5) | (1 << 4) | (0x3));
+
+	/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max=3 */
+	dib7000m_write_word(state, 32, (0 << 4) | 0x3);
+
+	/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step=5 */
+	dib7000m_write_word(state, 33, (0 << 4) | 0x5);
+
+	/* P_dvsy_sync_wait */
+	switch (ch->nfft) {
+		case 1: value = 256; break;
+		case 2: value = 128; break;
+		case 0:
+		default: value = 64; break;
+	}
+	value *= ((1 << (ch->guard)) * 3 / 2); // add 50% SFN margin
+	value <<= 4;
+
+	/* deactive the possibility of diversity reception if extended interleave - not for 7000MC */
+	/* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
+	if (ch->intlv_native || state->revision > 0x4000)
+		value |= (1 << 2) | (2 << 0);
+	else
+		value |= 0;
+	dib7000m_write_word(state, 266 + state->reg_offs, value);
+
+	/* channel estimation fine configuration */
+	switch (ch->nqam) {
+		case 2:
+			est[0] = 0x0148;       /* P_adp_regul_cnt 0.04 */
+			est[1] = 0xfff0;       /* P_adp_noise_cnt -0.002 */
+			est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
+			est[3] = 0xfff8;       /* P_adp_noise_ext -0.001 */
+			break;
+		case 1:
+			est[0] = 0x023d;       /* P_adp_regul_cnt 0.07 */
+			est[1] = 0xffdf;       /* P_adp_noise_cnt -0.004 */
+			est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
+			est[3] = 0xfff0;       /* P_adp_noise_ext -0.002 */
+			break;
+		default:
+			est[0] = 0x099a;       /* P_adp_regul_cnt 0.3 */
+			est[1] = 0xffae;       /* P_adp_noise_cnt -0.01 */
+			est[2] = 0x0333;       /* P_adp_regul_ext 0.1 */
+			est[3] = 0xfff8;       /* P_adp_noise_ext -0.002 */
+			break;
+	}
+	for (value = 0; value < 4; value++)
+		dib7000m_write_word(state, 214 + value + state->reg_offs, est[value]);
+
+	// set power-up level: interf+analog+AGC
+	dib7000m_set_power_mode(state, DIB7000M_POWER_INTERF_ANALOG_AGC);
+	dib7000m_set_adc_state(state, DIBX000_ADC_ON);
+
+	msleep(7);
+
+	//AGC initialization
+	if (state->cfg.agc_control)
+		state->cfg.agc_control(&state->demod, 1);
+
+	dib7000m_restart_agc(state);
+
+	// wait AGC rough lock time
+	msleep(5);
+
+	dib7000m_update_lna(state);
+	dib7000m_agc_soft_split(state);
+
+	// wait AGC accurate lock time
+	msleep(7);
+
+	if (state->cfg.agc_control)
+		state->cfg.agc_control(&state->demod, 0);
+
+	// set power-up level: autosearch
+	dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_DINTLV_ICIRM_EQUAL_CFROD);
+}
+
+static int dib7000m_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+	struct dib7000m_state *state = demod->demodulator_priv;
+	struct dibx000_ofdm_channel auto_ch;
+	int ret = 0;
+	u32 value;
+
+	INIT_OFDM_CHANNEL(&auto_ch);
+	auto_ch.RF_kHz           = ch->RF_kHz;
+	auto_ch.Bw               = ch->Bw;
+	auto_ch.nqam             = 2;
+	auto_ch.guard            = 0;
+	auto_ch.nfft             = 1;
+	auto_ch.vit_alpha        = 1;
+	auto_ch.vit_select_hp    = 1;
+	auto_ch.vit_code_rate_hp = 2;
+	auto_ch.vit_code_rate_lp = 3;
+	auto_ch.vit_hrch         = 0;
+	auto_ch.intlv_native     = 1;
+
+	dib7000m_set_channel(state, &auto_ch, 7);
+
+	// always use the setting for 8MHz here lock_time for 7,6 MHz are longer
+	value = 30 * state->cfg.bw->internal;
+	ret |= dib7000m_write_word(state, 6,  (u16) ((value >> 16) & 0xffff)); // lock0 wait time
+	ret |= dib7000m_write_word(state, 7,  (u16)  (value        & 0xffff)); // lock0 wait time
+	value = 100 * state->cfg.bw->internal;
+	ret |= dib7000m_write_word(state, 8,  (u16) ((value >> 16) & 0xffff)); // lock1 wait time
+	ret |= dib7000m_write_word(state, 9,  (u16)  (value        & 0xffff)); // lock1 wait time
+	value = 500 * state->cfg.bw->internal;
+	ret |= dib7000m_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
+	ret |= dib7000m_write_word(state, 11, (u16)  (value        & 0xffff)); // lock2 wait time
+
+	// start search
+	value = dib7000m_read_word(state, 0);
+	ret |= dib7000m_write_word(state, 0, value | (1 << 9));
+
+	/* clear n_irq_pending */
+	if (state->revision == 0x4000)
+		dib7000m_write_word(state, 1793, 0);
+	else
+		dib7000m_read_word(state, 537);
+
+	ret |= dib7000m_write_word(state, 0, (u16) value);
+
+	return ret;
+}
+
+static int dib7000m_autosearch_irq(struct dib7000m_state *state, u16 reg)
+{
+	u16 irq_pending = dib7000m_read_word(state, reg);
+
+	if (irq_pending & 0x1) { // failed
+		dprintk("#\n");
+		return 1;
+	}
+
+	if (irq_pending & 0x2) { // succeeded
+		dprintk("!\n");
+		return 2;
+	}
+	return 0; // still pending
+}
+
+static int dib7000m_autosearch_is_irq(struct dvb_frontend *demod)
+{
+	struct dib7000m_state *state = demod->demodulator_priv;
+	if (state->revision == 0x4000)
+		return dib7000m_autosearch_irq(state, 1793);
+	else
+		return dib7000m_autosearch_irq(state, 537);
+}
+
+static int dib7000m_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+	struct dib7000m_state *state = demod->demodulator_priv;
+	int ret = 0;
+	u16 value;
+
+	// we are already tuned - just resuming from suspend
+	if (ch != NULL)
+		dib7000m_set_channel(state, ch, 0);
+	else
+		return -EINVAL;
+
+	// restart demod
+	ret |= dib7000m_write_word(state, 898, 0x4000);
+	ret |= dib7000m_write_word(state, 898, 0x0000);
+	msleep(45);
+
+	ret |= dib7000m_set_power_mode(state, DIB7000M_POWER_COR4_CRY_ESRAM_MOUT_NUD);
+	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
+	ret |= dib7000m_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
+
+	// never achieved a lock with that bandwidth so far - wait for timfreq to update
+	if (state->timf == 0)
+		msleep(200);
+
+	//dump_reg(state);
+	/* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
+	value = (6 << 8) | 0x80;
+	switch (ch->nfft) {
+		case 0: value |= (7 << 12); break;
+		case 1: value |= (9 << 12); break;
+		case 2: value |= (8 << 12); break;
+	}
+	ret |= dib7000m_write_word(state, 26, value);
+
+	/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
+	value = (0 << 4);
+	switch (ch->nfft) {
+		case 0: value |= 0x6; break;
+		case 1: value |= 0x8; break;
+		case 2: value |= 0x7; break;
+	}
+	ret |= dib7000m_write_word(state, 32, value);
+
+	/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
+	value = (0 << 4);
+	switch (ch->nfft) {
+		case 0: value |= 0x6; break;
+		case 1: value |= 0x8; break;
+		case 2: value |= 0x7; break;
+	}
+	ret |= dib7000m_write_word(state, 33,  value);
+
+	// we achieved a lock - it's time to update the osc freq
+	if ((dib7000m_read_word(state, 535) >> 6)  & 0x1)
+		dib7000m_update_timf_freq(state);
+
+	return ret;
+}
+
+static int dib7000m_init(struct dvb_frontend *demod)
+{
+	struct dib7000m_state *state = demod->demodulator_priv;
+	int ret = 0;
+	u8 o = state->reg_offs;
+
+	dib7000m_set_power_mode(state, DIB7000M_POWER_ALL);
+
+	if (dib7000m_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0)
+		dprintk("-E-  could not start Slow ADC\n");
+
+	if (state->cfg.dvbt_mode)
+		dib7000m_write_word(state, 1796, 0x0); // select DVB-T output
+
+	if (state->cfg.mobile_mode)
+		ret |= dib7000m_write_word(state, 261 + o, 2);
+	else
+		ret |= dib7000m_write_word(state, 224 + o, 1);
+
+	ret |= dib7000m_write_word(state, 173 + o, 0);
+	ret |= dib7000m_write_word(state, 174 + o, 0);
+	ret |= dib7000m_write_word(state, 175 + o, 0);
+	ret |= dib7000m_write_word(state, 176 + o, 0);
+	ret |= dib7000m_write_word(state, 177 + o, 0);
+	ret |= dib7000m_write_word(state, 178 + o, 0);
+	ret |= dib7000m_write_word(state, 179 + o, 0);
+	ret |= dib7000m_write_word(state, 180 + o, 0);
+
+	// P_corm_thres Lock algorithms configuration
+	ret |= dib7000m_write_word(state, 26, 0x6680);
+
+	// P_palf_alpha_regul, P_palf_filter_freeze, P_palf_filter_on
+	ret |= dib7000m_write_word(state, 170 + o, 0x0410);
+	// P_fft_nb_to_cut
+	ret |= dib7000m_write_word(state, 182 + o, 8192);
+	// P_pha3_thres
+	ret |= dib7000m_write_word(state, 195 + o, 0x0ccd);
+	// P_cti_use_cpe, P_cti_use_prog
+	ret |= dib7000m_write_word(state, 196 + o,     0);
+	// P_cspu_regul, P_cspu_win_cut
+	ret |= dib7000m_write_word(state, 205 + o, 0x200f);
+	// P_adp_regul_cnt
+	ret |= dib7000m_write_word(state, 214 + o, 0x023d);
+	// P_adp_noise_cnt
+	ret |= dib7000m_write_word(state, 215 + o, 0x00a4);
+	// P_adp_regul_ext
+	ret |= dib7000m_write_word(state, 216 + o, 0x00a4);
+	// P_adp_noise_ext
+	ret |= dib7000m_write_word(state, 217 + o, 0x7ff0);
+	// P_adp_fil
+	ret |= dib7000m_write_word(state, 218 + o, 0x3ccc);
+
+	// P_2d_byp_ti_num
+	ret |= dib7000m_write_word(state, 226 + o, 0);
+
+	// P_fec_*
+	ret |= dib7000m_write_word(state, 281 + o, 0x0010);
+	// P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
+	ret |= dib7000m_write_word(state, 294 + o,0x0062);
+
+	// P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
+	if(state->cfg.tuner_is_baseband)
+		ret |= dib7000m_write_word(state, 36, 0x0755);
+	else
+		ret |= dib7000m_write_word(state, 36, 0x1f55);
+
+	// auto search configuration
+	ret |= dib7000m_write_word(state, 2,  0x0004);
+	ret |= dib7000m_write_word(state, 3,  0x1000);
+	ret |= dib7000m_write_word(state, 4,  0x0814);
+	ret |= dib7000m_write_word(state, 6,  0x001b);
+	ret |= dib7000m_write_word(state, 7,  0x7740);
+	ret |= dib7000m_write_word(state, 8,  0x005b);
+	ret |= dib7000m_write_word(state, 9,  0x8d80);
+	ret |= dib7000m_write_word(state, 10, 0x01c9);
+	ret |= dib7000m_write_word(state, 11, 0xc380);
+	ret |= dib7000m_write_word(state, 12, 0x0000);
+	ret |= dib7000m_write_word(state, 13, 0x0080);
+	ret |= dib7000m_write_word(state, 14, 0x0000);
+	ret |= dib7000m_write_word(state, 15, 0x0090);
+	ret |= dib7000m_write_word(state, 16, 0x0001);
+	ret |= dib7000m_write_word(state, 17, 0xd4c0);
+	ret |= dib7000m_write_word(state, 263 + o,0x0001);
+
+	// P_divclksel=3 P_divbitsel=1
+	if (state->revision == 0x4000)
+		dib7000m_write_word(state, 909, (3 << 10) | (1 << 6));
+	else
+		dib7000m_write_word(state, 909, (3 << 4) | 1);
+
+	// Tuner IO bank: max drive (14mA)
+	ret |= dib7000m_write_word(state, 912 ,0x2c8a);
+
+	ret |= dib7000m_write_word(state, 1817, 1);
+
+	return ret;
+}
+
+static int dib7000m_sleep(struct dvb_frontend *demod)
+{
+	struct dib7000m_state *st = demod->demodulator_priv;
+	dib7000m_set_output_mode(st, OUTMODE_HIGH_Z);
+	return dib7000m_set_power_mode(st, DIB7000M_POWER_INTERFACE_ONLY) |
+		dib7000m_set_adc_state(st, DIBX000_SLOW_ADC_OFF) |
+		dib7000m_set_adc_state(st, DIBX000_ADC_OFF);
+}
+
+static int dib7000m_identify(struct dib7000m_state *state)
+{
+	u16 value;
+	if ((value = dib7000m_read_word(state, 896)) != 0x01b3) {
+		dprintk("-E-  DiB7000M: wrong Vendor ID (read=0x%x)\n",value);
+		return -EREMOTEIO;
+	}
+
+	state->revision = dib7000m_read_word(state, 897);
+	if (state->revision != 0x4000 &&
+		state->revision != 0x4001 &&
+		state->revision != 0x4002) {
+		dprintk("-E-  DiB7000M: wrong Device ID (%x)\n",value);
+		return -EREMOTEIO;
+	}
+
+	/* protect this driver to be used with 7000PC */
+	if (state->revision == 0x4000 && dib7000m_read_word(state, 769) == 0x4000) {
+		dprintk("-E-  DiB7000M: this driver does not work with DiB7000PC\n");
+		return -EREMOTEIO;
+	}
+
+	switch (state->revision) {
+		case 0x4000: dprintk("-I-  found DiB7000MA/PA/MB/PB\n"); break;
+		case 0x4001: state->reg_offs = 1; dprintk("-I-  found DiB7000HC\n"); break;
+		case 0x4002: state->reg_offs = 1; dprintk("-I-  found DiB7000MC\n"); break;
+	}
+
+	return 0;
+}
+
+
+static int dib7000m_get_frontend(struct dvb_frontend* fe,
+				struct dvb_frontend_parameters *fep)
+{
+	struct dib7000m_state *state = fe->demodulator_priv;
+	u16 tps = dib7000m_read_word(state,480);
+
+	fep->inversion = INVERSION_AUTO;
+
+	fep->u.ofdm.bandwidth = state->current_bandwidth;
+
+	switch ((tps >> 8) & 0x3) {
+		case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break;
+		case 1: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; break;
+		/* case 2: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_4K; break; */
+	}
+
+	switch (tps & 0x3) {
+		case 0: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; break;
+		case 1: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; break;
+		case 2: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; break;
+		case 3: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; break;
+	}
+
+	switch ((tps >> 14) & 0x3) {
+		case 0: fep->u.ofdm.constellation = QPSK; break;
+		case 1: fep->u.ofdm.constellation = QAM_16; break;
+		case 2:
+		default: fep->u.ofdm.constellation = QAM_64; break;
+	}
+
+	/* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
+	/* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */
+
+	fep->u.ofdm.hierarchy_information = HIERARCHY_NONE;
+	switch ((tps >> 5) & 0x7) {
+		case 1: fep->u.ofdm.code_rate_HP = FEC_1_2; break;
+		case 2: fep->u.ofdm.code_rate_HP = FEC_2_3; break;
+		case 3: fep->u.ofdm.code_rate_HP = FEC_3_4; break;
+		case 5: fep->u.ofdm.code_rate_HP = FEC_5_6; break;
+		case 7:
+		default: fep->u.ofdm.code_rate_HP = FEC_7_8; break;
+
+	}
+
+	switch ((tps >> 2) & 0x7) {
+		case 1: fep->u.ofdm.code_rate_LP = FEC_1_2; break;
+		case 2: fep->u.ofdm.code_rate_LP = FEC_2_3; break;
+		case 3: fep->u.ofdm.code_rate_LP = FEC_3_4; break;
+		case 5: fep->u.ofdm.code_rate_LP = FEC_5_6; break;
+		case 7:
+		default: fep->u.ofdm.code_rate_LP = FEC_7_8; break;
+	}
+
+	/* native interleaver: (dib7000m_read_word(state, 481) >>  5) & 0x1 */
+
+	return 0;
+}
+
+static int dib7000m_set_frontend(struct dvb_frontend* fe,
+				struct dvb_frontend_parameters *fep)
+{
+	struct dib7000m_state *state = fe->demodulator_priv;
+	struct dibx000_ofdm_channel ch;
+
+	INIT_OFDM_CHANNEL(&ch);
+	FEP2DIB(fep,&ch);
+
+	state->current_bandwidth = fep->u.ofdm.bandwidth;
+	dib7000m_set_bandwidth(fe, fep->u.ofdm.bandwidth);
+
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe, fep);
+
+	if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
+		fep->u.ofdm.guard_interval    == GUARD_INTERVAL_AUTO ||
+		fep->u.ofdm.constellation     == QAM_AUTO ||
+		fep->u.ofdm.code_rate_HP      == FEC_AUTO) {
+		int i = 800, found;
+
+		dib7000m_autosearch_start(fe, &ch);
+		do {
+			msleep(1);
+			found = dib7000m_autosearch_is_irq(fe);
+		} while (found == 0 && i--);
+
+		dprintk("autosearch returns: %d\n",found);
+		if (found == 0 || found == 1)
+			return 0; // no channel found
+
+		dib7000m_get_frontend(fe, fep);
+		FEP2DIB(fep, &ch);
+	}
+
+	/* make this a config parameter */
+	dib7000m_set_output_mode(state, OUTMODE_MPEG2_FIFO);
+
+	return dib7000m_tune(fe, &ch);
+}
+
+static int dib7000m_read_status(struct dvb_frontend *fe, fe_status_t *stat)
+{
+	struct dib7000m_state *state = fe->demodulator_priv;
+	u16 lock = dib7000m_read_word(state, 535);
+
+	*stat = 0;
+
+	if (lock & 0x8000)
+		*stat |= FE_HAS_SIGNAL;
+	if (lock & 0x3000)
+		*stat |= FE_HAS_CARRIER;
+	if (lock & 0x0100)
+		*stat |= FE_HAS_VITERBI;
+	if (lock & 0x0010)
+		*stat |= FE_HAS_SYNC;
+	if (lock & 0x0008)
+		*stat |= FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int dib7000m_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct dib7000m_state *state = fe->demodulator_priv;
+	*ber = (dib7000m_read_word(state, 526) << 16) | dib7000m_read_word(state, 527);
+	return 0;
+}
+
+static int dib7000m_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
+{
+	struct dib7000m_state *state = fe->demodulator_priv;
+	*unc = dib7000m_read_word(state, 534);
+	return 0;
+}
+
+static int dib7000m_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	struct dib7000m_state *state = fe->demodulator_priv;
+	u16 val = dib7000m_read_word(state, 390);
+	*strength = 65535 - val;
+	return 0;
+}
+
+static int dib7000m_read_snr(struct dvb_frontend* fe, u16 *snr)
+{
+	*snr = 0x0000;
+	return 0;
+}
+
+static int dib7000m_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
+{
+	tune->min_delay_ms = 1000;
+	return 0;
+}
+
+static void dib7000m_release(struct dvb_frontend *demod)
+{
+	struct dib7000m_state *st = demod->demodulator_priv;
+	dibx000_exit_i2c_master(&st->i2c_master);
+	kfree(st);
+}
+
+struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
+{
+	struct dib7000m_state *st = demod->demodulator_priv;
+	return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
+}
+EXPORT_SYMBOL(dib7000m_get_i2c_master);
+
+int dib7000m_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000m_config cfg[])
+{
+	struct dib7000m_state st = { .i2c_adap = i2c };
+	int k = 0;
+	u8 new_addr = 0;
+
+	for (k = no_of_demods-1; k >= 0; k--) {
+		st.cfg = cfg[k];
+
+		/* designated i2c address */
+		new_addr          = (0x40 + k) << 1;
+		st.i2c_addr = new_addr;
+		if (dib7000m_identify(&st) != 0) {
+			st.i2c_addr = default_addr;
+			if (dib7000m_identify(&st) != 0) {
+				dprintk("DiB7000M #%d: not identified\n", k);
+				return -EIO;
+			}
+		}
+
+		/* start diversity to pull_down div_str - just for i2c-enumeration */
+		dib7000m_set_output_mode(&st, OUTMODE_DIVERSITY);
+
+		dib7000m_write_word(&st, 1796, 0x0); // select DVB-T output
+
+		/* set new i2c address and force divstart */
+		dib7000m_write_word(&st, 1794, (new_addr << 2) | 0x2);
+
+		dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr);
+	}
+
+	for (k = 0; k < no_of_demods; k++) {
+		st.cfg = cfg[k];
+		st.i2c_addr = (0x40 + k) << 1;
+
+		// unforce divstr
+		dib7000m_write_word(&st,1794, st.i2c_addr << 2);
+
+		/* deactivate div - it was just for i2c-enumeration */
+		dib7000m_set_output_mode(&st, OUTMODE_HIGH_Z);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(dib7000m_i2c_enumeration);
+
+static struct dvb_frontend_ops dib7000m_ops;
+struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg)
+{
+	struct dvb_frontend *demod;
+	struct dib7000m_state *st;
+	st = kzalloc(sizeof(struct dib7000m_state), GFP_KERNEL);
+	if (st == NULL)
+		return NULL;
+
+	memcpy(&st->cfg, cfg, sizeof(struct dib7000m_config));
+	st->i2c_adap = i2c_adap;
+	st->i2c_addr = i2c_addr;
+
+	demod                   = &st->demod;
+	demod->demodulator_priv = st;
+	memcpy(&st->demod.ops, &dib7000m_ops, sizeof(struct dvb_frontend_ops));
+
+	if (dib7000m_identify(st) != 0)
+		goto error;
+
+	if (st->revision == 0x4000)
+		dibx000_init_i2c_master(&st->i2c_master, DIB7000, st->i2c_adap, st->i2c_addr);
+	else
+		dibx000_init_i2c_master(&st->i2c_master, DIB7000MC, st->i2c_adap, st->i2c_addr);
+
+	dib7000m_demod_reset(st);
+
+	return demod;
+
+error:
+	kfree(st);
+	return NULL;
+}
+EXPORT_SYMBOL(dib7000m_attach);
+
+static struct dvb_frontend_ops dib7000m_ops = {
+	.info = {
+		.name = "DiBcom 7000MA/MB/PA/PB/MC",
+		.type = FE_OFDM,
+		.frequency_min      = 44250000,
+		.frequency_max      = 867250000,
+		.frequency_stepsize = 62500,
+		.caps = FE_CAN_INVERSION_AUTO |
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_RECOVER |
+			FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.release              = dib7000m_release,
+
+	.init                 = dib7000m_init,
+	.sleep                = dib7000m_sleep,
+
+	.set_frontend         = dib7000m_set_frontend,
+	.get_tune_settings    = dib7000m_fe_get_tune_settings,
+	.get_frontend         = dib7000m_get_frontend,
+
+	.read_status          = dib7000m_read_status,
+	.read_ber             = dib7000m_read_ber,
+	.read_signal_strength = dib7000m_read_signal_strength,
+	.read_snr             = dib7000m_read_snr,
+	.read_ucblocks        = dib7000m_read_unc_blocks,
+};
+
+MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_DESCRIPTION("Driver for the DiBcom 7000MA/MB/PA/PB/MC COFDM demodulator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib7000m.h b/drivers/media/dvb/frontends/dib7000m.h
new file mode 100644
index 00000000000..597e9cc2da6
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib7000m.h
@@ -0,0 +1,51 @@
+#ifndef DIB7000M_H
+#define DIB7000M_H
+
+#include "dibx000_common.h"
+
+struct dib7000m_config {
+	u8 dvbt_mode;
+	u8 output_mpeg2_in_188_bytes;
+	u8 hostbus_diversity;
+	u8 tuner_is_baseband;
+	u8 mobile_mode;
+	int (*update_lna) (struct dvb_frontend *, u16 agc_global);
+
+	u8 agc_config_count;
+	struct dibx000_agc_config *agc;
+
+	struct dibx000_bandwidth_config *bw;
+
+#define DIB7000M_GPIO_DEFAULT_DIRECTIONS 0xffff
+	u16 gpio_dir;
+#define DIB7000M_GPIO_DEFAULT_VALUES     0x0000
+	u16 gpio_val;
+#define DIB7000M_GPIO_PWM_POS0(v)        ((v & 0xf) << 12)
+#define DIB7000M_GPIO_PWM_POS1(v)        ((v & 0xf) << 8 )
+#define DIB7000M_GPIO_PWM_POS2(v)        ((v & 0xf) << 4 )
+#define DIB7000M_GPIO_PWM_POS3(v)         (v & 0xf)
+#define DIB7000M_GPIO_DEFAULT_PWM_POS    0xffff
+	u16 gpio_pwm_pos;
+
+	u16 pwm_freq_div;
+
+	u8 quartz_direct;
+
+	u8 input_clk_is_div_2;
+
+	int (*agc_control) (struct dvb_frontend *, u8 before);
+};
+
+#define DEFAULT_DIB7000M_I2C_ADDRESS 18
+
+extern struct dvb_frontend * dib7000m_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000m_config *cfg);
+extern struct i2c_adapter * dib7000m_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
+
+/* TODO
+extern INT dib7000m_set_gpio(struct dibDemod *demod, UCHAR num, UCHAR dir, UCHAR val);
+extern INT dib7000m_enable_vbg_voltage(struct dibDemod *demod);
+extern void dib7000m_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff);
+extern USHORT dib7000m_get_current_agc_global(struct dibDemod *demod);
+*/
+
+#endif
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
new file mode 100644
index 00000000000..0349a4b5da3
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -0,0 +1,1019 @@
+/*
+ * Linux-DVB Driver for DiBcom's second generation DiB7000P (PC).
+ *
+ * Copyright (C) 2005-6 DiBcom (http://www.dibcom.fr/)
+ *
+ * This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation, version 2.
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+
+#include "dvb_frontend.h"
+
+#include "dib7000p.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
+
+#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB7000P:"); printk(args); } } while (0)
+
+struct dib7000p_state {
+	struct dvb_frontend demod;
+    struct dib7000p_config cfg;
+
+	u8 i2c_addr;
+	struct i2c_adapter   *i2c_adap;
+
+	struct dibx000_i2c_master i2c_master;
+
+	u16 wbd_ref;
+
+	u8 current_band;
+	fe_bandwidth_t current_bandwidth;
+	struct dibx000_agc_config *current_agc;
+	u32 timf;
+
+	u16 gpio_dir;
+	u16 gpio_val;
+};
+
+enum dib7000p_power_mode {
+	DIB7000P_POWER_ALL = 0,
+	DIB7000P_POWER_INTERFACE_ONLY,
+};
+
+static u16 dib7000p_read_word(struct dib7000p_state *state, u16 reg)
+{
+	u8 wb[2] = { reg >> 8, reg & 0xff };
+	u8 rb[2];
+	struct i2c_msg msg[2] = {
+		{ .addr = state->i2c_addr >> 1, .flags = 0,        .buf = wb, .len = 2 },
+		{ .addr = state->i2c_addr >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2 },
+	};
+
+	if (i2c_transfer(state->i2c_adap, msg, 2) != 2)
+		dprintk("i2c read error on %d\n",reg);
+
+	return (rb[0] << 8) | rb[1];
+}
+
+static int dib7000p_write_word(struct dib7000p_state *state, u16 reg, u16 val)
+{
+	u8 b[4] = {
+		(reg >> 8) & 0xff, reg & 0xff,
+		(val >> 8) & 0xff, val & 0xff,
+	};
+	struct i2c_msg msg = {
+		.addr = state->i2c_addr >> 1, .flags = 0, .buf = b, .len = 4
+	};
+	return i2c_transfer(state->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0;
+}
+static int dib7000p_set_output_mode(struct dib7000p_state *state, int mode)
+{
+	int    ret = 0;
+	u16 outreg, fifo_threshold, smo_mode;
+
+	outreg = 0;
+	fifo_threshold = 1792;
+	smo_mode = (dib7000p_read_word(state, 235) & 0x0010) | (1 << 1);
+
+	dprintk("-I-  Setting output mode for demod %p to %d\n",
+			&state->demod, mode);
+
+	switch (mode) {
+		case OUTMODE_MPEG2_PAR_GATED_CLK:   // STBs with parallel gated clock
+			outreg = (1 << 10);  /* 0x0400 */
+			break;
+		case OUTMODE_MPEG2_PAR_CONT_CLK:    // STBs with parallel continues clock
+			outreg = (1 << 10) | (1 << 6); /* 0x0440 */
+			break;
+		case OUTMODE_MPEG2_SERIAL:          // STBs with serial input
+			outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0480 */
+			break;
+		case OUTMODE_DIVERSITY:
+			if (state->cfg.hostbus_diversity)
+				outreg = (1 << 10) | (4 << 6); /* 0x0500 */
+			else
+				outreg = (1 << 11);
+			break;
+		case OUTMODE_MPEG2_FIFO:            // e.g. USB feeding
+			smo_mode |= (3 << 1);
+			fifo_threshold = 512;
+			outreg = (1 << 10) | (5 << 6);
+			break;
+		case OUTMODE_HIGH_Z:  // disable
+			outreg = 0;
+			break;
+		default:
+			dprintk("Unhandled output_mode passed to be set for demod %p\n",&state->demod);
+			break;
+	}
+
+	if (state->cfg.output_mpeg2_in_188_bytes)
+		smo_mode |= (1 << 5) ;
+
+	ret |= dib7000p_write_word(state,  235, smo_mode);
+	ret |= dib7000p_write_word(state,  236, fifo_threshold); /* synchronous fread */
+	ret |= dib7000p_write_word(state, 1286, outreg);         /* P_Div_active */
+
+	return ret;
+}
+
+static int dib7000p_set_power_mode(struct dib7000p_state *state, enum dib7000p_power_mode mode)
+{
+	/* by default everything is powered off */
+	u16 reg_774 = 0xffff, reg_775 = 0xffff, reg_776 = 0x0007, reg_899  = 0x0003,
+		reg_1280 = (0xfe00) | (dib7000p_read_word(state, 1280) & 0x01ff);
+
+	/* now, depending on the requested mode, we power on */
+	switch (mode) {
+		/* power up everything in the demod */
+		case DIB7000P_POWER_ALL:
+			reg_774 = 0x0000; reg_775 = 0x0000; reg_776 = 0x0; reg_899 = 0x0; reg_1280 &= 0x01ff;
+			break;
+		/* just leave power on the control-interfaces: GPIO and (I2C or SDIO) */
+		case DIB7000P_POWER_INTERFACE_ONLY: /* TODO power up either SDIO or I2C */
+			reg_1280 &= ~((1 << 14) | (1 << 13) | (1 << 12) | (1 << 10));
+			break;
+/* TODO following stuff is just converted from the dib7000-driver - check when is used what */
+	}
+
+	dib7000p_write_word(state,  774,  reg_774);
+	dib7000p_write_word(state,  775,  reg_775);
+	dib7000p_write_word(state,  776,  reg_776);
+	dib7000p_write_word(state,  899,  reg_899);
+	dib7000p_write_word(state, 1280, reg_1280);
+
+	return 0;
+}
+
+static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_adc_states no)
+{
+	u16 reg_908 = dib7000p_read_word(state, 908),
+	       reg_909 = dib7000p_read_word(state, 909);
+
+	switch (no) {
+		case DIBX000_SLOW_ADC_ON:
+			reg_909 |= (1 << 1) | (1 << 0);
+			dib7000p_write_word(state, 909, reg_909);
+			reg_909 &= ~(1 << 1);
+			break;
+
+		case DIBX000_SLOW_ADC_OFF:
+			reg_909 |=  (1 << 1) | (1 << 0);
+			break;
+
+		case DIBX000_ADC_ON:
+			reg_908 &= 0x0fff;
+			reg_909 &= 0x0003;
+			break;
+
+		case DIBX000_ADC_OFF: // leave the VBG voltage on
+			reg_908 |= (1 << 14) | (1 << 13) | (1 << 12);
+			reg_909 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
+			break;
+
+		case DIBX000_VBG_ENABLE:
+			reg_908 &= ~(1 << 15);
+			break;
+
+		case DIBX000_VBG_DISABLE:
+			reg_908 |= (1 << 15);
+			break;
+
+		default:
+			break;
+	}
+
+//	dprintk("908: %x, 909: %x\n", reg_908, reg_909);
+
+	dib7000p_write_word(state, 908, reg_908);
+	dib7000p_write_word(state, 909, reg_909);
+}
+
+static int dib7000p_set_bandwidth(struct dvb_frontend *demod, u8 BW_Idx)
+{
+	struct dib7000p_state *state = demod->demodulator_priv;
+	u32 timf;
+
+	// store the current bandwidth for later use
+	state->current_bandwidth = BW_Idx;
+
+	if (state->timf == 0) {
+		dprintk("-D-  Using default timf\n");
+		timf = state->cfg.bw->timf;
+	} else {
+		dprintk("-D-  Using updated timf\n");
+		timf = state->timf;
+	}
+
+	timf = timf * (BW_INDEX_TO_KHZ(BW_Idx) / 100) / 80;
+
+	dprintk("timf: %d\n",timf);
+
+	dib7000p_write_word(state, 23, (timf >> 16) & 0xffff);
+	dib7000p_write_word(state, 24, (timf      ) & 0xffff);
+
+	return 0;
+}
+
+static int dib7000p_sad_calib(struct dib7000p_state *state)
+{
+/* internal */
+//	dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+	dib7000p_write_word(state, 73, (0 << 1) | (0 << 0));
+	dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096
+
+	/* do the calibration */
+	dib7000p_write_word(state, 73, (1 << 0));
+	dib7000p_write_word(state, 73, (0 << 0));
+
+	msleep(1);
+
+	return 0;
+}
+
+static void dib7000p_reset_pll(struct dib7000p_state *state)
+{
+	struct dibx000_bandwidth_config *bw = &state->cfg.bw[0];
+
+	dib7000p_write_word(state, 903, (bw->pll_prediv << 5) | (((bw->pll_ratio >> 6) & 0x3) << 3) | (bw->pll_range << 1) | bw->pll_reset);
+	dib7000p_write_word(state, 900, ((bw->pll_ratio & 0x3f) << 9) | (bw->pll_bypass << 15) | (bw->modulo << 7) | (bw->ADClkSrc << 6) |
+		(bw->IO_CLK_en_core << 5) | (bw->bypclk_div << 2) | (bw->enable_refdiv << 1) | (0 << 0));
+
+	dib7000p_write_word(state, 18, ((bw->internal*1000) >> 16) & 0xffff);
+	dib7000p_write_word(state, 19,  (bw->internal*1000       ) & 0xffff);
+	dib7000p_write_word(state, 21,  (bw->ifreq          >> 16) & 0xffff);
+	dib7000p_write_word(state, 22,  (bw->ifreq               ) & 0xffff);
+
+	dib7000p_write_word(state, 72, bw->sad_cfg);
+}
+
+static int dib7000p_reset_gpio(struct dib7000p_state *st)
+{
+	/* reset the GPIOs */
+	dprintk("-D-  gpio dir: %x: gpio val: %x, gpio pwm pos: %x\n",st->gpio_dir, st->gpio_val,st->cfg.gpio_pwm_pos);
+
+	dib7000p_write_word(st, 1029, st->gpio_dir);
+	dib7000p_write_word(st, 1030, st->gpio_val);
+
+	/* TODO 1031 is P_gpio_od */
+
+	dib7000p_write_word(st, 1032, st->cfg.gpio_pwm_pos);
+
+	dib7000p_write_word(st, 1037, st->cfg.pwm_freq_div);
+	return 0;
+}
+
+static int dib7000p_demod_reset(struct dib7000p_state *state)
+{
+	dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
+
+	dib7000p_set_adc_state(state, DIBX000_VBG_ENABLE);
+
+	/* restart all parts */
+	dib7000p_write_word(state,  770, 0xffff);
+	dib7000p_write_word(state,  771, 0xffff);
+	dib7000p_write_word(state,  772, 0x001f);
+	dib7000p_write_word(state,  898, 0x0003);
+	/* except i2c, sdio, gpio - control interfaces */
+	dib7000p_write_word(state, 1280, 0x01fc - ((1 << 7) | (1 << 6) | (1 << 5)) );
+
+	dib7000p_write_word(state,  770, 0);
+	dib7000p_write_word(state,  771, 0);
+	dib7000p_write_word(state,  772, 0);
+	dib7000p_write_word(state,  898, 0);
+	dib7000p_write_word(state, 1280, 0);
+
+	/* default */
+	dib7000p_reset_pll(state);
+
+	if (dib7000p_reset_gpio(state) != 0)
+		dprintk("-E-  GPIO reset was not successful.\n");
+
+	if (dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) != 0)
+		dprintk("-E-  OUTPUT_MODE could not be resetted.\n");
+
+	/* unforce divstr regardless whether i2c enumeration was done or not */
+	dib7000p_write_word(state, 1285, dib7000p_read_word(state, 1285) & ~(1 << 1) );
+
+	dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);
+
+	return 0;
+}
+
+static void dib7000p_restart_agc(struct dib7000p_state *state)
+{
+	// P_restart_iqc & P_restart_agc
+	dib7000p_write_word(state, 770, 0x0c00);
+	dib7000p_write_word(state, 770, 0x0000);
+}
+
+static void dib7000p_update_lna(struct dib7000p_state *state)
+{
+	int i;
+	u16 dyn_gain;
+
+	// when there is no LNA to program return immediatly
+	if (state->cfg.update_lna == NULL)
+		return;
+
+	for (i = 0; i < 5; i++) {
+		// read dyn_gain here (because it is demod-dependent and not tuner)
+		dyn_gain = dib7000p_read_word(state, 394);
+
+		if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
+			dib7000p_restart_agc(state);
+			msleep(5);
+		} else
+			break;
+	}
+}
+
+static void dib7000p_pll_clk_cfg(struct dib7000p_state *state)
+{
+	u16 tmp = 0;
+	tmp = dib7000p_read_word(state, 903);
+	dib7000p_write_word(state, 903, (tmp | 0x1));   //pwr-up pll
+	tmp = dib7000p_read_word(state, 900);
+	dib7000p_write_word(state, 900, (tmp & 0x7fff) | (1 << 6));     //use High freq clock
+}
+
+static void dib7000p_update_timf_freq(struct dib7000p_state *state)
+{
+	u32 timf = (dib7000p_read_word(state, 427) << 16) | dib7000p_read_word(state, 428);
+	state->timf = timf * 80 / (BW_INDEX_TO_KHZ(state->current_bandwidth) / 100);
+	dib7000p_write_word(state, 23, (u16) (timf >> 16));
+	dib7000p_write_word(state, 24, (u16) (timf & 0xffff));
+	dprintk("-D-  Updated timf_frequency: %d (default: %d)\n",state->timf, state->cfg.bw->timf);
+}
+
+static void dib7000p_set_channel(struct dib7000p_state *state, struct dibx000_ofdm_channel *ch, u8 seq)
+{
+	u16 tmp, est[4]; // reg_26, reg_32, reg_33, reg_187, reg_188, reg_189, reg_190, reg_207, reg_208;
+
+	/* nfft, guard, qam, alpha */
+	dib7000p_write_word(state, 0, (ch->nfft << 7) | (ch->guard << 5) | (ch->nqam << 3) | (ch->vit_alpha));
+	dib7000p_write_word(state, 5, (seq << 4) | 1); /* do not force tps, search list 0 */
+
+	/* P_dintl_native, P_dintlv_inv, P_vit_hrch, P_vit_code_rate, P_vit_select_hp */
+	tmp = (ch->intlv_native << 6) | (ch->vit_hrch << 4) | (ch->vit_select_hp & 0x1);
+	if (ch->vit_hrch == 0 || ch->vit_select_hp == 1)
+		tmp |= (ch->vit_code_rate_hp << 1);
+	else
+		tmp |= (ch->vit_code_rate_lp << 1);
+	dib7000p_write_word(state, 208, tmp);
+
+	/* P_dvsy_sync_wait */
+	switch (ch->nfft) {
+		case 1: tmp = 256; break;
+		case 2: tmp = 128; break;
+		case 0:
+		default: tmp = 64; break;
+	}
+	tmp *= ((1 << (ch->guard)) * 3 / 2); // add 50% SFN margin
+	tmp <<= 4;
+
+	/* deactive the possibility of diversity reception if extended interleave */
+	/* P_dvsy_sync_mode = 0, P_dvsy_sync_enable=1, P_dvcb_comb_mode=2 */
+	if (ch->intlv_native || ch->nfft == 1)
+		tmp |= (1 << 2) | (2 << 0);
+	dib7000p_write_word(state, 207, tmp);
+
+	dib7000p_write_word(state, 26, 0x6680);   // timf(6xxx)
+	dib7000p_write_word(state, 29, 0x1273);   // isi inh1273 on1073
+	dib7000p_write_word(state, 32, 0x0003);   // pha_off_max(xxx3)
+	dib7000p_write_word(state, 33, 0x0005);   // sfreq(xxx5)
+
+	/* channel estimation fine configuration */
+	switch (ch->nqam) {
+		case 2:
+			est[0] = 0x0148;       /* P_adp_regul_cnt 0.04 */
+			est[1] = 0xfff0;       /* P_adp_noise_cnt -0.002 */
+			est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
+			est[3] = 0xfff8;       /* P_adp_noise_ext -0.001 */
+			break;
+		case 1:
+			est[0] = 0x023d;       /* P_adp_regul_cnt 0.07 */
+			est[1] = 0xffdf;       /* P_adp_noise_cnt -0.004 */
+			est[2] = 0x00a4;       /* P_adp_regul_ext 0.02 */
+			est[3] = 0xfff0;       /* P_adp_noise_ext -0.002 */
+			break;
+		default:
+			est[0] = 0x099a;       /* P_adp_regul_cnt 0.3 */
+			est[1] = 0xffae;       /* P_adp_noise_cnt -0.01 */
+			est[2] = 0x0333;       /* P_adp_regul_ext 0.1 */
+			est[3] = 0xfff8;       /* P_adp_noise_ext -0.002 */
+			break;
+	}
+	for (tmp = 0; tmp < 4; tmp++)
+		dib7000p_write_word(state, 187 + tmp, est[tmp]);
+
+	// set power-up level: interf+analog+AGC
+	dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
+	dib7000p_set_adc_state(state, DIBX000_ADC_ON);
+	dib7000p_pll_clk_cfg(state);
+	msleep(7);
+
+	// AGC initialization
+	if (state->cfg.agc_control)
+		state->cfg.agc_control(&state->demod, 1);
+
+	dib7000p_restart_agc(state);
+
+	// wait AGC rough lock time
+	msleep(5);
+
+	dib7000p_update_lna(state);
+
+	// wait AGC accurate lock time
+	msleep(7);
+	if (state->cfg.agc_control)
+		state->cfg.agc_control(&state->demod, 0);
+}
+
+static int dib7000p_autosearch_start(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+	struct dib7000p_state *state = demod->demodulator_priv;
+	struct dibx000_ofdm_channel auto_ch;
+	u32 value;
+
+	INIT_OFDM_CHANNEL(&auto_ch);
+	auto_ch.RF_kHz           = ch->RF_kHz;
+	auto_ch.Bw               = ch->Bw;
+	auto_ch.nqam             = 2;
+	auto_ch.guard            = 0;
+	auto_ch.nfft             = 1;
+	auto_ch.vit_alpha        = 1;
+	auto_ch.vit_select_hp    = 1;
+	auto_ch.vit_code_rate_hp = 2;
+	auto_ch.vit_code_rate_lp = 3;
+	auto_ch.vit_hrch         = 0;
+	auto_ch.intlv_native     = 1;
+
+	dib7000p_set_channel(state, &auto_ch, 7);
+
+	// always use the setting for 8MHz here lock_time for 7,6 MHz are longer
+	value = 30 * state->cfg.bw->internal;
+	dib7000p_write_word(state, 6,  (u16) ((value >> 16) & 0xffff)); // lock0 wait time
+	dib7000p_write_word(state, 7,  (u16)  (value        & 0xffff)); // lock0 wait time
+	value = 100 * state->cfg.bw->internal;
+	dib7000p_write_word(state, 8,  (u16) ((value >> 16) & 0xffff)); // lock1 wait time
+	dib7000p_write_word(state, 9,  (u16)  (value        & 0xffff)); // lock1 wait time
+	value = 500 * state->cfg.bw->internal;
+	dib7000p_write_word(state, 10, (u16) ((value >> 16) & 0xffff)); // lock2 wait time
+	dib7000p_write_word(state, 11, (u16)  (value        & 0xffff)); // lock2 wait time
+
+	value = dib7000p_read_word(state, 0);
+	dib7000p_write_word(state, 0, (1 << 9) | value);
+	dib7000p_read_word(state, 1284);
+	dib7000p_write_word(state, 0, (u16) value);
+
+	return 0;
+}
+
+static int dib7000p_autosearch_is_irq(struct dvb_frontend *demod)
+{
+	struct dib7000p_state *state = demod->demodulator_priv;
+	u16 irq_pending = dib7000p_read_word(state, 1284);
+
+	if (irq_pending & 0x1) // failed
+		return 1;
+
+	if (irq_pending & 0x2) // succeeded
+		return 2;
+
+	return 0; // still pending
+}
+
+static int dib7000p_tune(struct dvb_frontend *demod, struct dibx000_ofdm_channel *ch)
+{
+	struct dib7000p_state *state = demod->demodulator_priv;
+	u16 tmp = 0;
+
+	if (ch != NULL)
+		dib7000p_set_channel(state, ch, 0);
+	else
+		return -EINVAL;
+
+	// restart demod
+	dib7000p_write_word(state, 770, 0x4000);
+	dib7000p_write_word(state, 770, 0x0000);
+	msleep(45);
+
+	/* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3, P_ctrl_inh_cor4=1, P_ctrl_alpha_cor4=3 */
+	dib7000p_write_word(state, 29, (0 << 14) | (4 << 10) | (0 << 9) | (3 << 5) | (1 << 4) | (0x3));
+
+	// never achieved a lock with that bandwidth so far - wait for osc-freq to update
+	if (state->timf == 0)
+		msleep(200);
+
+	/* offset loop parameters */
+
+	/* P_timf_alpha, P_corm_alpha=6, P_corm_thres=0x80 */
+	tmp = (6 << 8) | 0x80;
+	switch (ch->nfft) {
+		case 0: tmp |= (7 << 12); break;
+		case 1: tmp |= (9 << 12); break;
+		case 2: tmp |= (8 << 12); break;
+	}
+	dib7000p_write_word(state, 26, tmp);  /* timf_a(6xxx) */
+
+	/* P_ctrl_freeze_pha_shift=0, P_ctrl_pha_off_max */
+	tmp = (0 << 4);
+	switch (ch->nfft) {
+		case 0: tmp |= 0x6; break;
+		case 1: tmp |= 0x8; break;
+		case 2: tmp |= 0x7; break;
+	}
+	dib7000p_write_word(state, 32,  tmp);
+
+	/* P_ctrl_sfreq_inh=0, P_ctrl_sfreq_step */
+	tmp = (0 << 4);
+	switch (ch->nfft) {
+		case 0: tmp |= 0x6; break;
+		case 1: tmp |= 0x8; break;
+		case 2: tmp |= 0x7; break;
+	}
+	dib7000p_write_word(state, 33,  tmp);
+
+	tmp = dib7000p_read_word(state,509);
+	if (!((tmp >> 6) & 0x1)) {
+		/* restart the fec */
+		tmp = dib7000p_read_word(state,771);
+		dib7000p_write_word(state, 771, tmp | (1 << 1));
+		dib7000p_write_word(state, 771, tmp);
+		msleep(10);
+		tmp = dib7000p_read_word(state,509);
+	}
+
+	// we achieved a lock - it's time to update the osc freq
+	if ((tmp >> 6) & 0x1)
+		dib7000p_update_timf_freq(state);
+
+	return 0;
+}
+
+static int dib7000p_init(struct dvb_frontend *demod)
+{
+	struct dibx000_agc_config *agc;
+	struct dib7000p_state *state = demod->demodulator_priv;
+	int ret = 0;
+
+	// Demodulator default configuration
+	agc = state->cfg.agc;
+
+	dib7000p_set_power_mode(state, DIB7000P_POWER_ALL);
+	dib7000p_set_adc_state(state, DIBX000_SLOW_ADC_ON);
+
+	/* AGC */
+	ret |= dib7000p_write_word(state, 75 ,  agc->setup );
+	ret |= dib7000p_write_word(state, 76 ,  agc->inv_gain );
+	ret |= dib7000p_write_word(state, 77 ,  agc->time_stabiliz );
+	ret |= dib7000p_write_word(state, 100, (agc->alpha_level << 12) | agc->thlock);
+
+	// Demod AGC loop configuration
+	ret |= dib7000p_write_word(state, 101, (agc->alpha_mant << 5) | agc->alpha_exp);
+	ret |= dib7000p_write_word(state, 102, (agc->beta_mant << 6)  | agc->beta_exp);
+
+	/* AGC continued */
+	dprintk("-D-  WBD: ref: %d, sel: %d, active: %d, alpha: %d\n",
+		state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel);
+
+	if (state->wbd_ref != 0)
+		ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | state->wbd_ref);
+	else
+		ret |= dib7000p_write_word(state, 105, (agc->wbd_inv << 12) | agc->wbd_ref);
+
+	ret |= dib7000p_write_word(state, 106, (agc->wbd_sel << 13) | (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8) );
+
+	ret |= dib7000p_write_word(state, 107,  agc->agc1_max);
+	ret |= dib7000p_write_word(state, 108,  agc->agc1_min);
+	ret |= dib7000p_write_word(state, 109,  agc->agc2_max);
+	ret |= dib7000p_write_word(state, 110,  agc->agc2_min);
+	ret |= dib7000p_write_word(state, 111, (agc->agc1_pt1 << 8) | agc->agc1_pt2 );
+	ret |= dib7000p_write_word(state, 112,  agc->agc1_pt3);
+	ret |= dib7000p_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2);
+	ret |= dib7000p_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2);
+	ret |= dib7000p_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2);
+
+	/* disable power smoothing */
+	ret |= dib7000p_write_word(state, 145, 0);
+	ret |= dib7000p_write_word(state, 146, 0);
+	ret |= dib7000p_write_word(state, 147, 0);
+	ret |= dib7000p_write_word(state, 148, 0);
+	ret |= dib7000p_write_word(state, 149, 0);
+	ret |= dib7000p_write_word(state, 150, 0);
+	ret |= dib7000p_write_word(state, 151, 0);
+	ret |= dib7000p_write_word(state, 152, 0);
+
+	// P_timf_alpha=6, P_corm_alpha=6, P_corm_thres=128 default: 6,4,26
+	ret |= dib7000p_write_word(state, 26 ,0x6680);
+
+	// P_palf_filter_on=1, P_palf_filter_freeze=0, P_palf_alpha_regul=16
+	ret |= dib7000p_write_word(state, 142,0x0410);
+	// P_fft_freq_dir=1, P_fft_nb_to_cut=0
+	ret |= dib7000p_write_word(state, 154,1 << 13);
+	// P_pha3_thres, default 0x3000
+	ret |= dib7000p_write_word(state, 168,0x0ccd);
+	// P_cti_use_cpe=0, P_cti_use_prog=0, P_cti_win_len=16, default: 0x0010
+	//ret |= dib7000p_write_word(state, 169,0x0010);
+	// P_cspu_regul=512, P_cspu_win_cut=15, default: 0x2005
+	ret |= dib7000p_write_word(state, 183,0x200f);
+	// P_adp_regul_cnt=573, default: 410
+	ret |= dib7000p_write_word(state, 187,0x023d);
+	// P_adp_noise_cnt=
+	ret |= dib7000p_write_word(state, 188,0x00a4);
+	// P_adp_regul_ext
+	ret |= dib7000p_write_word(state, 189,0x00a4);
+	// P_adp_noise_ext
+	ret |= dib7000p_write_word(state, 190,0x7ff0);
+	// P_adp_fil
+	ret |= dib7000p_write_word(state, 191,0x3ccc);
+
+	ret |= dib7000p_write_word(state, 222,0x0010);
+	// P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard
+	ret |= dib7000p_write_word(state, 235,0x0062);
+
+	// P_iqc_alpha_pha, P_iqc_alpha_amp_dcc_alpha, ...
+	if(state->cfg.tuner_is_baseband)
+		ret |= dib7000p_write_word(state, 36,0x0755);
+	else
+		ret |= dib7000p_write_word(state, 36,0x1f55);
+
+	// auto search configuration
+	ret |= dib7000p_write_word(state, 2  ,0x0004);
+	ret |= dib7000p_write_word(state, 3  ,0x1000);
+
+	/* Equal Lock */
+	ret |= dib7000p_write_word(state, 4   ,0x0814);
+
+	ret |= dib7000p_write_word(state, 6  ,0x001b);
+	ret |= dib7000p_write_word(state, 7  ,0x7740);
+	ret |= dib7000p_write_word(state, 8  ,0x005b);
+	ret |= dib7000p_write_word(state, 9  ,0x8d80);
+	ret |= dib7000p_write_word(state, 10 ,0x01c9);
+	ret |= dib7000p_write_word(state, 11 ,0xc380);
+	ret |= dib7000p_write_word(state, 12 ,0x0000);
+	ret |= dib7000p_write_word(state, 13 ,0x0080);
+	ret |= dib7000p_write_word(state, 14 ,0x0000);
+	ret |= dib7000p_write_word(state, 15 ,0x0090);
+	ret |= dib7000p_write_word(state, 16 ,0x0001);
+	ret |= dib7000p_write_word(state, 17 ,0xd4c0);
+
+	// P_clk_cfg1
+	ret |= dib7000p_write_word(state, 901, 0x0006);
+
+	// P_divclksel=3 P_divbitsel=1
+	ret |= dib7000p_write_word(state, 902, (3 << 10) | (1 << 6));
+
+	// Tuner IO bank: max drive (14mA) + divout pads max drive
+	ret |= dib7000p_write_word(state, 905, 0x2c8e);
+
+	ret |= dib7000p_set_bandwidth(&state->demod, BANDWIDTH_8_MHZ);
+	dib7000p_sad_calib(state);
+
+	return ret;
+}
+
+static int dib7000p_sleep(struct dvb_frontend *demod)
+{
+	struct dib7000p_state *state = demod->demodulator_priv;
+	return dib7000p_set_output_mode(state, OUTMODE_HIGH_Z) | dib7000p_set_power_mode(state, DIB7000P_POWER_INTERFACE_ONLY);
+}
+
+static int dib7000p_identify(struct dib7000p_state *st)
+{
+	u16 value;
+	dprintk("-I-  DiB7000PC: checking demod on I2C address: %d (%x)\n",
+		st->i2c_addr, st->i2c_addr);
+
+	if ((value = dib7000p_read_word(st, 768)) != 0x01b3) {
+		dprintk("-E-  DiB7000PC: wrong Vendor ID (read=0x%x)\n",value);
+		return -EREMOTEIO;
+	}
+
+	if ((value = dib7000p_read_word(st, 769)) != 0x4000) {
+		dprintk("-E-  DiB7000PC: wrong Device ID (%x)\n",value);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+
+static int dib7000p_get_frontend(struct dvb_frontend* fe,
+				struct dvb_frontend_parameters *fep)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	u16 tps = dib7000p_read_word(state,463);
+
+	fep->inversion = INVERSION_AUTO;
+
+	fep->u.ofdm.bandwidth = state->current_bandwidth;
+
+	switch ((tps >> 8) & 0x3) {
+		case 0: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_2K; break;
+		case 1: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_8K; break;
+		/* case 2: fep->u.ofdm.transmission_mode = TRANSMISSION_MODE_4K; break; */
+	}
+
+	switch (tps & 0x3) {
+		case 0: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_32; break;
+		case 1: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_16; break;
+		case 2: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_8; break;
+		case 3: fep->u.ofdm.guard_interval = GUARD_INTERVAL_1_4; break;
+	}
+
+	switch ((tps >> 14) & 0x3) {
+		case 0: fep->u.ofdm.constellation = QPSK; break;
+		case 1: fep->u.ofdm.constellation = QAM_16; break;
+		case 2:
+		default: fep->u.ofdm.constellation = QAM_64; break;
+	}
+
+	/* as long as the frontend_param structure is fixed for hierarchical transmission I refuse to use it */
+	/* (tps >> 13) & 0x1 == hrch is used, (tps >> 10) & 0x7 == alpha */
+
+	fep->u.ofdm.hierarchy_information = HIERARCHY_NONE;
+	switch ((tps >> 5) & 0x7) {
+		case 1: fep->u.ofdm.code_rate_HP = FEC_1_2; break;
+		case 2: fep->u.ofdm.code_rate_HP = FEC_2_3; break;
+		case 3: fep->u.ofdm.code_rate_HP = FEC_3_4; break;
+		case 5: fep->u.ofdm.code_rate_HP = FEC_5_6; break;
+		case 7:
+		default: fep->u.ofdm.code_rate_HP = FEC_7_8; break;
+
+	}
+
+	switch ((tps >> 2) & 0x7) {
+		case 1: fep->u.ofdm.code_rate_LP = FEC_1_2; break;
+		case 2: fep->u.ofdm.code_rate_LP = FEC_2_3; break;
+		case 3: fep->u.ofdm.code_rate_LP = FEC_3_4; break;
+		case 5: fep->u.ofdm.code_rate_LP = FEC_5_6; break;
+		case 7:
+		default: fep->u.ofdm.code_rate_LP = FEC_7_8; break;
+	}
+
+	/* native interleaver: (dib7000p_read_word(state, 464) >>  5) & 0x1 */
+
+	return 0;
+}
+
+static int dib7000p_set_frontend(struct dvb_frontend* fe,
+				struct dvb_frontend_parameters *fep)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	struct dibx000_ofdm_channel ch;
+
+	INIT_OFDM_CHANNEL(&ch);
+	FEP2DIB(fep,&ch);
+
+	state->current_bandwidth = fep->u.ofdm.bandwidth;
+	dib7000p_set_bandwidth(fe, fep->u.ofdm.bandwidth);
+
+	if (fe->ops.tuner_ops.set_params)
+		fe->ops.tuner_ops.set_params(fe, fep);
+
+	if (fep->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ||
+		fep->u.ofdm.guard_interval    == GUARD_INTERVAL_AUTO ||
+		fep->u.ofdm.constellation     == QAM_AUTO ||
+		fep->u.ofdm.code_rate_HP      == FEC_AUTO) {
+		int i = 800, found;
+
+		dib7000p_autosearch_start(fe, &ch);
+		do {
+			msleep(1);
+			found = dib7000p_autosearch_is_irq(fe);
+		} while (found == 0 && i--);
+
+		dprintk("autosearch returns: %d\n",found);
+		if (found == 0 || found == 1)
+			return 0; // no channel found
+
+		dib7000p_get_frontend(fe, fep);
+		FEP2DIB(fep, &ch);
+	}
+
+	/* make this a config parameter */
+	dib7000p_set_output_mode(state, OUTMODE_MPEG2_FIFO);
+
+	return dib7000p_tune(fe, &ch);
+}
+
+static int dib7000p_read_status(struct dvb_frontend *fe, fe_status_t *stat)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	u16 lock = dib7000p_read_word(state, 509);
+
+	*stat = 0;
+
+	if (lock & 0x8000)
+		*stat |= FE_HAS_SIGNAL;
+	if (lock & 0x3000)
+		*stat |= FE_HAS_CARRIER;
+	if (lock & 0x0100)
+		*stat |= FE_HAS_VITERBI;
+	if (lock & 0x0010)
+		*stat |= FE_HAS_SYNC;
+	if (lock & 0x0008)
+		*stat |= FE_HAS_LOCK;
+
+	return 0;
+}
+
+static int dib7000p_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	*ber = (dib7000p_read_word(state, 500) << 16) | dib7000p_read_word(state, 501);
+	return 0;
+}
+
+static int dib7000p_read_unc_blocks(struct dvb_frontend *fe, u32 *unc)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	*unc = dib7000p_read_word(state, 506);
+	return 0;
+}
+
+static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	struct dib7000p_state *state = fe->demodulator_priv;
+	u16 val = dib7000p_read_word(state, 394);
+	*strength = 65535 - val;
+	return 0;
+}
+
+static int dib7000p_read_snr(struct dvb_frontend* fe, u16 *snr)
+{
+	*snr = 0x0000;
+	return 0;
+}
+
+static int dib7000p_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune)
+{
+	tune->min_delay_ms = 1000;
+	return 0;
+}
+
+static void dib7000p_release(struct dvb_frontend *demod)
+{
+	struct dib7000p_state *st = demod->demodulator_priv;
+	dibx000_exit_i2c_master(&st->i2c_master);
+	kfree(st);
+}
+
+int dib7000pc_detection(struct i2c_adapter *i2c_adap)
+{
+	u8 tx[2], rx[2];
+	struct i2c_msg msg[2] = {
+		{ .addr = 18 >> 1, .flags = 0,        .buf = tx, .len = 2 },
+		{ .addr = 18 >> 1, .flags = I2C_M_RD, .buf = rx, .len = 2 },
+	};
+
+	tx[0] = 0x03;
+	tx[1] = 0x00;
+
+	if (i2c_transfer(i2c_adap, msg, 2) == 2)
+		if (rx[0] == 0x01 && rx[1] == 0xb3) {
+			dprintk("-D-  DiB7000PC detected\n");
+			return 1;
+		}
+
+	msg[0].addr = msg[1].addr = 0x40;
+
+	if (i2c_transfer(i2c_adap, msg, 2) == 2)
+		if (rx[0] == 0x01 && rx[1] == 0xb3) {
+			dprintk("-D-  DiB7000PC detected\n");
+			return 1;
+		}
+
+	dprintk("-D-  DiB7000PC not detected\n");
+	return 0;
+}
+EXPORT_SYMBOL(dib7000pc_detection);
+
+struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *demod, enum dibx000_i2c_interface intf, int gating)
+{
+	struct dib7000p_state *st = demod->demodulator_priv;
+	return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating);
+}
+EXPORT_SYMBOL(dib7000p_get_i2c_master);
+
+int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[])
+{
+	struct dib7000p_state st = { .i2c_adap = i2c };
+	int k = 0;
+	u8 new_addr = 0;
+
+	for (k = no_of_demods-1; k >= 0; k--) {
+		st.cfg = cfg[k];
+
+		/* designated i2c address */
+		new_addr          = (0x40 + k) << 1;
+		st.i2c_addr = new_addr;
+		if (dib7000p_identify(&st) != 0) {
+			st.i2c_addr = default_addr;
+			if (dib7000p_identify(&st) != 0) {
+				dprintk("DiB7000P #%d: not identified\n", k);
+				return -EIO;
+			}
+		}
+
+		/* start diversity to pull_down div_str - just for i2c-enumeration */
+		dib7000p_set_output_mode(&st, OUTMODE_DIVERSITY);
+
+		/* set new i2c address and force divstart */
+		dib7000p_write_word(&st, 1285, (new_addr << 2) | 0x2);
+
+		dprintk("IC %d initialized (to i2c_address 0x%x)\n", k, new_addr);
+	}
+
+	for (k = 0; k < no_of_demods; k++) {
+		st.cfg = cfg[k];
+		st.i2c_addr = (0x40 + k) << 1;
+
+		// unforce divstr
+		dib7000p_write_word(&st, 1285, st.i2c_addr << 2);
+
+		/* deactivate div - it was just for i2c-enumeration */
+		dib7000p_set_output_mode(&st, OUTMODE_HIGH_Z);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(dib7000p_i2c_enumeration);
+
+static struct dvb_frontend_ops dib7000p_ops;
+struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg)
+{
+	struct dvb_frontend *demod;
+	struct dib7000p_state *st;
+	st = kzalloc(sizeof(struct dib7000p_state), GFP_KERNEL);
+	if (st == NULL)
+		return NULL;
+
+	memcpy(&st->cfg, cfg, sizeof(struct dib7000p_config));
+	st->i2c_adap = i2c_adap;
+	st->i2c_addr = i2c_addr;
+	st->gpio_val = cfg->gpio_val;
+	st->gpio_dir = cfg->gpio_dir;
+
+	demod                   = &st->demod;
+	demod->demodulator_priv = st;
+	memcpy(&st->demod.ops, &dib7000p_ops, sizeof(struct dvb_frontend_ops));
+
+	if (dib7000p_identify(st) != 0)
+		goto error;
+
+	dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr);
+
+	dib7000p_demod_reset(st);
+
+	return demod;
+
+error:
+	kfree(st);
+	return NULL;
+}
+EXPORT_SYMBOL(dib7000p_attach);
+
+static struct dvb_frontend_ops dib7000p_ops = {
+	.info = {
+		.name = "DiBcom 7000PC",
+		.type = FE_OFDM,
+		.frequency_min      = 44250000,
+		.frequency_max      = 867250000,
+		.frequency_stepsize = 62500,
+		.caps = FE_CAN_INVERSION_AUTO |
+			FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
+			FE_CAN_TRANSMISSION_MODE_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO |
+			FE_CAN_RECOVER |
+			FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.release              = dib7000p_release,
+
+	.init                 = dib7000p_init,
+	.sleep                = dib7000p_sleep,
+
+	.set_frontend         = dib7000p_set_frontend,
+	.get_tune_settings    = dib7000p_fe_get_tune_settings,
+	.get_frontend         = dib7000p_get_frontend,
+
+	.read_status          = dib7000p_read_status,
+	.read_ber             = dib7000p_read_ber,
+	.read_signal_strength = dib7000p_read_signal_strength,
+	.read_snr             = dib7000p_read_snr,
+	.read_ucblocks        = dib7000p_read_unc_blocks,
+};
+
+MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
+MODULE_DESCRIPTION("Driver for the DiBcom 7000PC COFDM demodulator");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h
new file mode 100644
index 00000000000..79465cf1ace
--- /dev/null
+++ b/drivers/media/dvb/frontends/dib7000p.h
@@ -0,0 +1,46 @@
+#ifndef DIB7000P_H
+#define DIB7000P_H
+
+#include "dibx000_common.h"
+
+struct dib7000p_config {
+	u8 output_mpeg2_in_188_bytes;
+	u8 hostbus_diversity;
+	u8 tuner_is_baseband;
+	int (*update_lna) (struct dvb_frontend *, u16 agc_global);
+
+	struct dibx000_agc_config *agc;
+	struct dibx000_bandwidth_config *bw;
+
+#define DIB7000P_GPIO_DEFAULT_DIRECTIONS 0xffff
+	u16 gpio_dir;
+#define DIB7000P_GPIO_DEFAULT_VALUES     0x0000
+	u16 gpio_val;
+#define DIB7000P_GPIO_PWM_POS0(v)        ((v & 0xf) << 12)
+#define DIB7000P_GPIO_PWM_POS1(v)        ((v & 0xf) << 8 )
+#define DIB7000P_GPIO_PWM_POS2(v)        ((v & 0xf) << 4 )
+#define DIB7000P_GPIO_PWM_POS3(v)         (v & 0xf)
+#define DIB7000P_GPIO_DEFAULT_PWM_POS    0xffff
+	u16 gpio_pwm_pos;
+
+	u16 pwm_freq_div;
+
+	u8 quartz_direct;
+
+	int (*agc_control) (struct dvb_frontend *, u8 before);
+};
+
+#define DEFAULT_DIB7000P_I2C_ADDRESS 18
+
+extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg);
+extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
+extern int dib7000pc_detection(struct i2c_adapter *i2c_adap);
+
+/* TODO
+extern INT dib7000p_set_gpio(struct dibDemod *demod, UCHAR num, UCHAR dir, UCHAR val);
+extern INT dib7000p_enable_vbg_voltage(struct dibDemod *demod);
+extern void dib7000p_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff);
+extern USHORT dib7000p_get_current_agc_global(struct dibDemod *demod);
+*/
+
+#endif
diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h
index bb0c65f8aee..a1df604366c 100644
--- a/drivers/media/dvb/frontends/dibx000_common.h
+++ b/drivers/media/dvb/frontends/dibx000_common.h
@@ -32,6 +32,13 @@ extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst);
 #define BAND_LBAND 0x01
 #define BAND_UHF   0x02
 #define BAND_VHF   0x04
+#define BAND_SBAND 0x08
+#define BAND_FM	   0x10
+
+#define BAND_OF_FREQUENCY(freq_kHz) ( (freq_kHz) <= 115000 ? BAND_FM : \
+									(freq_kHz) <= 250000 ? BAND_VHF : \
+									(freq_kHz) <= 863000 ? BAND_UHF : \
+									(freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND )
 
 struct dibx000_agc_config {
 	/* defines the capabilities of this AGC-setting - using the BAND_-defines*/
@@ -129,6 +136,7 @@ enum dibx000_adc_states {
 
 /* I hope I can get rid of the following kludge in the near future */
 struct dibx000_ofdm_channel {
+	u32 RF_kHz;
 	u8  Bw;
 	s16 nfft;
 	s16 guard;
@@ -138,9 +146,11 @@ struct dibx000_ofdm_channel {
 	s16 vit_alpha;
 	s16 vit_code_rate_hp;
 	s16 vit_code_rate_lp;
+	u8  intlv_native;
 };
 
 #define FEP2DIB(fep,ch) \
+	(ch)->RF_kHz           = (fep)->frequency / 1000; \
 	(ch)->Bw               = (fep)->u.ofdm.bandwidth; \
 	(ch)->nfft             = (fep)->u.ofdm.transmission_mode == TRANSMISSION_MODE_AUTO ? -1 : (fep)->u.ofdm.transmission_mode; \
 	(ch)->guard            = (fep)->u.ofdm.guard_interval == GUARD_INTERVAL_AUTO ? -1 : (fep)->u.ofdm.guard_interval; \
@@ -149,7 +159,8 @@ struct dibx000_ofdm_channel {
 	(ch)->vit_select_hp    = 1; \
 	(ch)->vit_alpha        = 1; \
 	(ch)->vit_code_rate_hp = (fep)->u.ofdm.code_rate_HP == FEC_AUTO ? -1 : (fep)->u.ofdm.code_rate_HP; \
-	(ch)->vit_code_rate_lp = (fep)->u.ofdm.code_rate_LP == FEC_AUTO ? -1 : (fep)->u.ofdm.code_rate_LP;
+	(ch)->vit_code_rate_lp = (fep)->u.ofdm.code_rate_LP == FEC_AUTO ? -1 : (fep)->u.ofdm.code_rate_LP; \
+	(ch)->intlv_native     = 1;
 
 #define INIT_OFDM_CHANNEL(ch) do {\
 	(ch)->Bw               = 0;  \
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index b7e7108ee5b..62de760c844 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -472,14 +472,14 @@ int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
 		printk("pll: %s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n",
 		       desc->name, div, buf[0], buf[1], buf[2], buf[3]);
 
-	return 0;
+	// calculate the frequency we set it to
+	return (div * desc->entries[i].stepsize) - desc->entries[i].offset;
 }
 EXPORT_SYMBOL(dvb_pll_configure);
 
 static int dvb_pll_release(struct dvb_frontend *fe)
 {
-	if (fe->tuner_priv)
-		kfree(fe->tuner_priv);
+	kfree(fe->tuner_priv);
 	fe->tuner_priv = NULL;
 	return 0;
 }
@@ -489,7 +489,8 @@ static int dvb_pll_sleep(struct dvb_frontend *fe)
 	struct dvb_pll_priv *priv = fe->tuner_priv;
 	u8 buf[4];
 	struct i2c_msg msg =
-		{ .addr = priv->pll_i2c_address, .flags = 0, .buf = buf, .len = sizeof(buf) };
+		{ .addr = priv->pll_i2c_address, .flags = 0,
+		  .buf = buf, .len = sizeof(buf) };
 	int i;
 	int result;
 
@@ -517,16 +518,16 @@ static int dvb_pll_sleep(struct dvb_frontend *fe)
 	return 0;
 }
 
-static int dvb_pll_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+static int dvb_pll_set_params(struct dvb_frontend *fe,
+			      struct dvb_frontend_parameters *params)
 {
 	struct dvb_pll_priv *priv = fe->tuner_priv;
 	u8 buf[4];
 	struct i2c_msg msg =
-		{ .addr = priv->pll_i2c_address, .flags = 0, .buf = buf, .len = sizeof(buf) };
+		{ .addr = priv->pll_i2c_address, .flags = 0,
+		  .buf = buf, .len = sizeof(buf) };
 	int result;
-	u32 div;
-	int i;
-	u32 bandwidth = 0;
+	u32 bandwidth = 0, frequency = 0;
 
 	if (priv->i2c == NULL)
 		return -EINVAL;
@@ -536,8 +537,11 @@ static int dvb_pll_set_params(struct dvb_frontend *fe, struct dvb_frontend_param
 		bandwidth = params->u.ofdm.bandwidth;
 	}
 
-	if ((result = dvb_pll_configure(priv->pll_desc, buf, params->frequency, bandwidth)) != 0)
+	if ((result = dvb_pll_configure(priv->pll_desc, buf,
+					params->frequency, bandwidth)) < 0)
 		return result;
+	else
+		frequency = result;
 
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 1);
@@ -545,26 +549,19 @@ static int dvb_pll_set_params(struct dvb_frontend *fe, struct dvb_frontend_param
 		return result;
 	}
 
-	// calculate the frequency we set it to
-	for (i = 0; i < priv->pll_desc->count; i++) {
-		if (params->frequency > priv->pll_desc->entries[i].limit)
-			continue;
-		break;
-	}
-	div = (params->frequency + priv->pll_desc->entries[i].offset) / priv->pll_desc->entries[i].stepsize;
-	priv->frequency = (div * priv->pll_desc->entries[i].stepsize) - priv->pll_desc->entries[i].offset;
+	priv->frequency = frequency;
 	priv->bandwidth = bandwidth;
 
 	return 0;
 }
 
-static int dvb_pll_calc_regs(struct dvb_frontend *fe, struct dvb_frontend_parameters *params, u8 *buf, int buf_len)
+static int dvb_pll_calc_regs(struct dvb_frontend *fe,
+			     struct dvb_frontend_parameters *params,
+			     u8 *buf, int buf_len)
 {
 	struct dvb_pll_priv *priv = fe->tuner_priv;
 	int result;
-	u32 div;
-	int i;
-	u32 bandwidth = 0;
+	u32 bandwidth = 0, frequency = 0;
 
 	if (buf_len < 5)
 		return -EINVAL;
@@ -574,18 +571,15 @@ static int dvb_pll_calc_regs(struct dvb_frontend *fe, struct dvb_frontend_parame
 		bandwidth = params->u.ofdm.bandwidth;
 	}
 
-	if ((result = dvb_pll_configure(priv->pll_desc, buf+1, params->frequency, bandwidth)) != 0)
+	if ((result = dvb_pll_configure(priv->pll_desc, buf+1,
+					params->frequency, bandwidth)) < 0)
 		return result;
+	else
+		frequency = result;
+
 	buf[0] = priv->pll_i2c_address;
 
-	// calculate the frequency we set it to
-	for (i = 0; i < priv->pll_desc->count; i++) {
-		if (params->frequency > priv->pll_desc->entries[i].limit)
-			continue;
-		break;
-	}
-	div = (params->frequency + priv->pll_desc->entries[i].offset) / priv->pll_desc->entries[i].stepsize;
-	priv->frequency = (div * priv->pll_desc->entries[i].stepsize) - priv->pll_desc->entries[i].offset;
+	priv->frequency = frequency;
 	priv->bandwidth = bandwidth;
 
 	return 5;
@@ -614,10 +608,13 @@ static struct dvb_tuner_ops dvb_pll_tuner_ops = {
 	.get_bandwidth = dvb_pll_get_bandwidth,
 };
 
-struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, struct i2c_adapter *i2c, struct dvb_pll_desc *desc)
+struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr,
+				    struct i2c_adapter *i2c,
+				    struct dvb_pll_desc *desc)
 {
 	u8 b1 [] = { 0 };
-	struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD, .buf = b1, .len = 1 };
+	struct i2c_msg msg = { .addr = pll_addr, .flags = I2C_M_RD,
+			       .buf = b1, .len = 1 };
 	struct dvb_pll_priv *priv = NULL;
 	int ret;
 
@@ -640,7 +637,9 @@ struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, struc
 	priv->i2c = i2c;
 	priv->pll_desc = desc;
 
-	memcpy(&fe->ops.tuner_ops, &dvb_pll_tuner_ops, sizeof(struct dvb_tuner_ops));
+	memcpy(&fe->ops.tuner_ops, &dvb_pll_tuner_ops,
+	       sizeof(struct dvb_tuner_ops));
+
 	strncpy(fe->ops.tuner_ops.info.name, desc->name, 128);
 	fe->ops.tuner_ops.info.frequency_min = desc->min;
 	fe->ops.tuner_ops.info.frequency_min = desc->max;
diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h
index ed5ac5a361a..681186a5e5e 100644
--- a/drivers/media/dvb/frontends/dvb-pll.h
+++ b/drivers/media/dvb/frontends/dvb-pll.h
@@ -48,7 +48,7 @@ extern struct dvb_pll_desc dvb_pll_philips_td1316;
 extern struct dvb_pll_desc dvb_pll_thomson_fe6600;
 
 extern int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
-		      u32 freq, int bandwidth);
+			     u32 freq, int bandwidth);
 
 /**
  * Attach a dvb-pll to the supplied frontend structure.
@@ -59,6 +59,9 @@ extern int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf,
  * @param desc dvb_pll_desc to use.
  * @return Frontend pointer on success, NULL on failure
  */
-extern struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe, int pll_addr, struct i2c_adapter *i2c, struct dvb_pll_desc *desc);
+extern struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe,
+					   int pll_addr,
+					   struct i2c_adapter *i2c,
+					   struct dvb_pll_desc *desc);
 
 #endif
diff --git a/drivers/media/dvb/frontends/isl6421.h b/drivers/media/dvb/frontends/isl6421.h
index 1916e3eb2df..ea7f78a7d3c 100644
--- a/drivers/media/dvb/frontends/isl6421.h
+++ b/drivers/media/dvb/frontends/isl6421.h
@@ -39,7 +39,7 @@
 #define ISL6421_ISEL1	0x20
 #define ISL6421_DCL	0x40
 
-#if defined(CONFIG_DVB_ISL6421) || defined(CONFIG_DVB_ISL6421_MODULE)
+#if defined(CONFIG_DVB_ISL6421) || (defined(CONFIG_DVB_ISL6421_MODULE) && defined(MODULE))
 /* override_set and override_clear control which system register bits (above) to always set & clear */
 extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr,
 			  u8 override_set, u8 override_clear);
diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c
index f3bc82e44a2..1aeacb1c4af 100644
--- a/drivers/media/dvb/frontends/l64781.c
+++ b/drivers/media/dvb/frontends/l64781.c
@@ -36,7 +36,7 @@ struct l64781_state {
 	struct dvb_frontend frontend;
 
 	/* private demodulator data */
-	int first:1;
+	unsigned int first:1;
 };
 
 #define dprintk(args...) \
diff --git a/drivers/media/dvb/frontends/l64781.h b/drivers/media/dvb/frontends/l64781.h
index 21ba4a23076..cd15f76ff28 100644
--- a/drivers/media/dvb/frontends/l64781.h
+++ b/drivers/media/dvb/frontends/l64781.h
@@ -31,7 +31,7 @@ struct l64781_config
 	u8 demod_address;
 };
 
-#if defined(CONFIG_DVB_L64781) || defined(CONFIG_DVB_L64781_MODULE)
+#if defined(CONFIG_DVB_L64781) || (defined(CONFIG_DVB_L64781_MODULE) && defined(MODULE))
 extern struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 					  struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/lg_h06xf.h b/drivers/media/dvb/frontends/lg_h06xf.h
deleted file mode 100644
index 754d51d1112..00000000000
--- a/drivers/media/dvb/frontends/lg_h06xf.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  lg_h06xf.h - ATSC Tuner support for LG TDVS-H06xF
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef _LG_H06XF_H_
-#define _LG_H06XF_H_
-#include "dvb-pll.h"
-
-static int lg_h06xf_pll_set(struct dvb_frontend* fe, struct i2c_adapter* i2c_adap,
-		     struct dvb_frontend_parameters* params)
-{
-	u8 buf[4];
-	struct i2c_msg msg = { .addr = 0x61, .flags = 0,
-			       .buf = buf, .len = sizeof(buf) };
-	int err;
-
-	dvb_pll_configure(&dvb_pll_lg_tdvs_h06xf, buf, params->frequency, 0);
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if ((err = i2c_transfer(i2c_adap, &msg, 1)) != 1) {
-		printk(KERN_WARNING "lg_h06xf: %s error "
-			"(addr %02x <- %02x, err = %i)\n",
-			__FUNCTION__, buf[0], buf[1], err);
-		if (err < 0)
-			return err;
-		else
-			return -EREMOTEIO;
-	}
-
-	/* Set the Auxiliary Byte. */
-	buf[0] = buf[2];
-	buf[0] &= ~0x20;
-	buf[0] |= 0x18;
-	buf[1] = 0x50;
-	msg.len = 2;
-	if (fe->ops.i2c_gate_ctrl)
-		fe->ops.i2c_gate_ctrl(fe, 1);
-	if ((err = i2c_transfer(i2c_adap, &msg, 1)) != 1) {
-		printk(KERN_WARNING "lg_h06xf: %s error "
-			"(addr %02x <- %02x, err = %i)\n",
-			__FUNCTION__, buf[0], buf[1], err);
-		if (err < 0)
-			return err;
-		else
-			return -EREMOTEIO;
-	}
-
-	return 0;
-}
-#endif
diff --git a/drivers/media/dvb/frontends/lgdt330x.c b/drivers/media/dvb/frontends/lgdt330x.c
index 9a354708bd2..68aad0f6519 100644
--- a/drivers/media/dvb/frontends/lgdt330x.c
+++ b/drivers/media/dvb/frontends/lgdt330x.c
@@ -31,9 +31,6 @@
  *   Air2PC/AirStar 2 ATSC 3rd generation (HD5000)
  *   pcHDTV HD5500
  *
- * TODO:
- * signal strength always returns 0.
- *
  */
 
 #include <linux/kernel.h>
@@ -46,9 +43,13 @@
 #include <asm/byteorder.h>
 
 #include "dvb_frontend.h"
+#include "dvb_math.h"
 #include "lgdt330x_priv.h"
 #include "lgdt330x.h"
 
+/* Use Equalizer Mean Squared Error instead of Phaser Tracker MSE */
+/* #define USE_EQMSE */
+
 static int debug = 0;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug,"Turn on/off lgdt330x frontend debugging (default:off).");
@@ -68,6 +69,7 @@ struct lgdt330x_state
 
 	/* Demodulator private data */
 	fe_modulation_t current_modulation;
+	u32 snr; /* Result of last SNR calculation */
 
 	/* Tuner private data */
 	u32 current_frequency;
@@ -302,10 +304,10 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe,
 	static u8 lgdt3303_8vsb_44_data[] = {
 		0x04, 0x00,
 		0x0d, 0x40,
-	0x0e, 0x87,
-	0x0f, 0x8e,
-	0x10, 0x01,
-	0x47, 0x8b };
+		0x0e, 0x87,
+		0x0f, 0x8e,
+		0x10, 0x01,
+		0x47, 0x8b };
 
 	/*
 	 * Array of byte pairs <address, value>
@@ -435,9 +437,6 @@ static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
 		/* Test signal does not exist flag */
 		/* as well as the AGC lock flag.   */
 		*status |= FE_HAS_SIGNAL;
-	} else {
-		/* Without a signal all other status bits are meaningless */
-		return 0;
 	}
 
 	/*
@@ -500,9 +499,6 @@ static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status)
 		/* Test input signal does not exist flag */
 		/* as well as the AGC lock flag.   */
 		*status |= FE_HAS_SIGNAL;
-	} else {
-		/* Without a signal all other status bits are meaningless */
-		return 0;
 	}
 
 	/* Carrier Recovery Lock Status Register */
@@ -543,151 +539,150 @@ static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status)
 	return 0;
 }
 
-static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+/* Calculate SNR estimation (scaled by 2^24)
+
+   8-VSB SNR equations from LGDT3302 and LGDT3303 datasheets, QAM
+   equations from LGDT3303 datasheet.  VSB is the same between the '02
+   and '03, so maybe QAM is too?  Perhaps someone with a newer datasheet
+   that has QAM information could verify?
+
+   For 8-VSB: (two ways, take your pick)
+   LGDT3302:
+     SNR_EQ = 10 * log10(25 * 24^2 / EQ_MSE)
+   LGDT3303:
+     SNR_EQ = 10 * log10(25 * 32^2 / EQ_MSE)
+   LGDT3302 & LGDT3303:
+     SNR_PT = 10 * log10(25 * 32^2 / PT_MSE)  (we use this one)
+   For 64-QAM:
+     SNR    = 10 * log10( 688128   / MSEQAM)
+   For 256-QAM:
+     SNR    = 10 * log10( 696320   / MSEQAM)
+
+   We re-write the snr equation as:
+     SNR * 2^24 = 10*(c - intlog10(MSE))
+   Where for 256-QAM, c = log10(696320) * 2^24, and so on. */
+
+static u32 calculate_snr(u32 mse, u32 c)
 {
-	/* not directly available. */
-	*strength = 0;
-	return 0;
+	if (mse == 0) /* No signal */
+		return 0;
+
+	mse = intlog10(mse);
+	if (mse > c) {
+		/* Negative SNR, which is possible, but realisticly the
+		demod will lose lock before the signal gets this bad.  The
+		API only allows for unsigned values, so just return 0 */
+		return 0;
+	}
+	return 10*(c - mse);
 }
 
 static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-#ifdef SNR_IN_DB
-	/*
-	 * Spec sheet shows formula for SNR_EQ = 10 log10(25 * 24**2 / noise)
-	 * and SNR_PH = 10 log10(25 * 32**2 / noise) for equalizer and phase tracker
-	 * respectively. The following tables are built on these formulas.
-	 * The usual definition is SNR = 20 log10(signal/noise)
-	 * If the specification is wrong the value retuned is 1/2 the actual SNR in db.
-	 *
-	 * This table is a an ordered list of noise values computed by the
-	 * formula from the spec sheet such that the index into the table
-	 * starting at 43 or 45 is the SNR value in db. There are duplicate noise
-	 * value entries at the beginning because the SNR varies more than
-	 * 1 db for a change of 1 digit in noise at very small values of noise.
-	 *
-	 * Examples from SNR_EQ table:
-	 * noise SNR
-	 *   0    43
-	 *   1    42
-	 *   2    39
-	 *   3    37
-	 *   4    36
-	 *   5    35
-	 *   6    34
-	 *   7    33
-	 *   8    33
-	 *   9    32
-	 *   10   32
-	 *   11   31
-	 *   12   31
-	 *   13   30
-	 */
-
-	static const u32 SNR_EQ[] =
-		{ 1,     2,      2,      2, 3,      3,      4,     4,     5,     7,
-		  9,     11,     13,     17, 21,     26,     33,    41,    52,    65,
-		  81,    102,    129,    162, 204,    257,    323,   406,   511,   644,
-		  810,   1020,   1284,   1616, 2035,   2561,   3224,  4059,  5110,  6433,
-		  8098,  10195,  12835,  16158, 20341,  25608,  32238, 40585, 51094, 64323,
-		  80978, 101945, 128341, 161571, 203406, 256073, 0x40000
-		};
-
-	static const u32 SNR_PH[] =
-		{ 1,     2,      2,      2,      3,      3,     4,     5,     6,     8,
-		  10,    12,     15,     19,     23,     29, 37,    46,    58,    73,
-		  91,    115,    144,    182,    229,    288, 362,   456,   574,   722,
-		  909,   1144,   1440,   1813,   2282,   2873, 3617,  4553,  5732,  7216,
-		  9084,  11436,  14396,  18124,  22817,  28724,  36161, 45524, 57312, 72151,
-		  90833, 114351, 143960, 181235, 228161, 0x080000
-		};
-
-	static u8 buf[5];/* read data buffer */
-	static u32 noise;   /* noise value */
-	static u32 snr_db;  /* index into SNR_EQ[] */
 	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
+	u8 buf[5];	/* read data buffer */
+	u32 noise;	/* noise value */
+	u32 c;		/* per-modulation SNR calculation constant */
 
-	/* read both equalizer and phase tracker noise data */
-	i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf));
-
-	if (state->current_modulation == VSB_8) {
-		/* Equalizer Mean-Square Error Register for VSB */
+	switch(state->current_modulation) {
+	case VSB_8:
+		i2c_read_demod_bytes(state, LGDT3302_EQPH_ERR0, buf, 5);
+#ifdef USE_EQMSE
+		/* Use Equalizer Mean-Square Error Register */
+		/* SNR for ranges from -15.61 to +41.58 */
 		noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2];
-
-		/*
-		 * Look up noise value in table.
-		 * A better search algorithm could be used...
-		 * watch out there are duplicate entries.
-		 */
-		for (snr_db = 0; snr_db < sizeof(SNR_EQ); snr_db++) {
-			if (noise < SNR_EQ[snr_db]) {
-				*snr = 43 - snr_db;
-				break;
-			}
-		}
-	} else {
-		/* Phase Tracker Mean-Square Error Register for QAM */
-		noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
-
-		/* Look up noise value in table. */
-		for (snr_db = 0; snr_db < sizeof(SNR_PH); snr_db++) {
-			if (noise < SNR_PH[snr_db]) {
-				*snr = 45 - snr_db;
-				break;
-			}
-		}
-	}
+		c = 69765745; /* log10(25*24^2)*2^24 */
 #else
-	/* Return the raw noise value */
-	static u8 buf[5];/* read data buffer */
-	static u32 noise;   /* noise value */
-	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
-
-	/* read both equalizer and pase tracker noise data */
-	i2c_read_demod_bytes(state, EQPH_ERR0, buf, sizeof(buf));
-
-	if (state->current_modulation == VSB_8) {
-		/* Phase Tracker Mean-Square Error Register for VSB */
+		/* Use Phase Tracker Mean-Square Error Register */
+		/* SNR for ranges from -13.11 to +44.08 */
 		noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
-	} else {
-
-		/* Carrier Recovery Mean-Square Error for QAM */
-		i2c_read_demod_bytes(state, 0x1a, buf, 2);
+		c = 73957994; /* log10(25*32^2)*2^24 */
+#endif
+		break;
+	case QAM_64:
+	case QAM_256:
+		i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
 		noise = ((buf[0] & 3) << 8) | buf[1];
+		c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
+		/* log10(688128)*2^24 and log10(696320)*2^24 */
+		break;
+	default:
+		printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n",
+		       __FUNCTION__);
+		return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
 	}
 
-	/* Small values for noise mean signal is better so invert noise */
-	*snr = ~noise;
-#endif
+	state->snr = calculate_snr(noise, c);
+	*snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
 
-	dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr);
+	dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __FUNCTION__, noise,
+		state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
 
 	return 0;
 }
 
 static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr)
 {
-	/* Return the raw noise value */
-	static u8 buf[5];/* read data buffer */
-	static u32 noise;   /* noise value */
 	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
+	u8 buf[5];	/* read data buffer */
+	u32 noise;	/* noise value */
+	u32 c;		/* per-modulation SNR calculation constant */
 
-	if (state->current_modulation == VSB_8) {
-
-		i2c_read_demod_bytes(state, 0x6e, buf, 5);
-		/* Phase Tracker Mean-Square Error Register for VSB */
+	switch(state->current_modulation) {
+	case VSB_8:
+		i2c_read_demod_bytes(state, LGDT3303_EQPH_ERR0, buf, 5);
+#ifdef USE_EQMSE
+		/* Use Equalizer Mean-Square Error Register */
+		/* SNR for ranges from -16.12 to +44.08 */
+		noise = ((buf[0] & 0x78) << 13) | (buf[1] << 8) | buf[2];
+		c = 73957994; /* log10(25*32^2)*2^24 */
+#else
+		/* Use Phase Tracker Mean-Square Error Register */
+		/* SNR for ranges from -13.11 to +44.08 */
 		noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4];
-	} else {
-
-		/* Carrier Recovery Mean-Square Error for QAM */
-		i2c_read_demod_bytes(state, 0x1a, buf, 2);
+		c = 73957994; /* log10(25*32^2)*2^24 */
+#endif
+		break;
+	case QAM_64:
+	case QAM_256:
+		i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
 		noise = (buf[0] << 8) | buf[1];
+		c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
+		/* log10(688128)*2^24 and log10(696320)*2^24 */
+		break;
+	default:
+		printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n",
+		       __FUNCTION__);
+		return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
 	}
 
-	/* Small values for noise mean signal is better so invert noise */
-	*snr = ~noise;
+	state->snr = calculate_snr(noise, c);
+	*snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
+
+	dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __FUNCTION__, noise,
+		state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16);
+
+	return 0;
+}
+
+static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+{
+	/* Calculate Strength from SNR up to 35dB */
+	/* Even though the SNR can go higher than 35dB, there is some comfort */
+	/* factor in having a range of strong signals that can show at 100%   */
+	struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
+	u16 snr;
+	int ret;
 
-	dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr);
+	ret = fe->ops.read_snr(fe, &snr);
+	if (ret != 0)
+		return ret;
+	/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
+	/* scale the range 0 - 35*2^24 into 0 - 65535 */
+	if (state->snr >= 8960 * 0x10000)
+		*strength = 0xffff;
+	else
+		*strength = state->snr / 8960;
 
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/lgdt330x.h b/drivers/media/dvb/frontends/lgdt330x.h
index 3f96b485584..995059004b1 100644
--- a/drivers/media/dvb/frontends/lgdt330x.h
+++ b/drivers/media/dvb/frontends/lgdt330x.h
@@ -52,7 +52,7 @@ struct lgdt330x_config
 	int clock_polarity_flip;
 };
 
-#if defined(CONFIG_DVB_LGDT330X) || defined(CONFIG_DVB_LGDT330X_MODULE)
+#if defined(CONFIG_DVB_LGDT330X) || (defined(CONFIG_DVB_LGDT330X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
 					    struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/lgdt330x_priv.h b/drivers/media/dvb/frontends/lgdt330x_priv.h
index 59b7c5b9012..38c76695abf 100644
--- a/drivers/media/dvb/frontends/lgdt330x_priv.h
+++ b/drivers/media/dvb/frontends/lgdt330x_priv.h
@@ -51,14 +51,19 @@ enum I2C_REG {
 	AGC_RFIF_ACC2= 0x3b,
 	AGC_STATUS= 0x3f,
 	SYNC_STATUS_VSB= 0x43,
-	EQPH_ERR0= 0x47,
-	EQ_ERR1= 0x48,
-	EQ_ERR2= 0x49,
-	PH_ERR1= 0x4a,
-	PH_ERR2= 0x4b,
 	DEMUX_CONTROL= 0x66,
+	LGDT3302_EQPH_ERR0= 0x47,
+	LGDT3302_EQ_ERR1= 0x48,
+	LGDT3302_EQ_ERR2= 0x49,
+	LGDT3302_PH_ERR1= 0x4a,
+	LGDT3302_PH_ERR2= 0x4b,
 	LGDT3302_PACKET_ERR_COUNTER1= 0x6a,
 	LGDT3302_PACKET_ERR_COUNTER2= 0x6b,
+	LGDT3303_EQPH_ERR0= 0x6e,
+	LGDT3303_EQ_ERR1= 0x6f,
+	LGDT3303_EQ_ERR2= 0x70,
+	LGDT3303_PH_ERR1= 0x71,
+	LGDT3303_PH_ERR2= 0x72,
 	LGDT3303_PACKET_ERR_COUNTER1= 0x8b,
 	LGDT3303_PACKET_ERR_COUNTER2= 0x8c,
 };
diff --git a/drivers/media/dvb/frontends/lgh06xf.c b/drivers/media/dvb/frontends/lgh06xf.c
new file mode 100644
index 00000000000..2202d0cc878
--- /dev/null
+++ b/drivers/media/dvb/frontends/lgh06xf.c
@@ -0,0 +1,134 @@
+/*
+ *  lgh06xf.c - ATSC Tuner support for LG TDVS-H06xF
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "dvb-pll.h"
+#include "lgh06xf.h"
+
+#define LG_H06XF_PLL_I2C_ADDR 0x61
+
+struct lgh06xf_priv {
+	struct i2c_adapter *i2c;
+	u32 frequency;
+};
+
+static int lgh06xf_release(struct dvb_frontend *fe)
+{
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+	return 0;
+}
+
+static int lgh06xf_set_params(struct dvb_frontend* fe,
+			      struct dvb_frontend_parameters* params)
+{
+	struct lgh06xf_priv *priv = fe->tuner_priv;
+	u8 buf[4];
+	struct i2c_msg msg = { .addr = LG_H06XF_PLL_I2C_ADDR, .flags = 0,
+			       .buf = buf, .len = sizeof(buf) };
+	u32 frequency;
+	int result;
+
+	if ((result = dvb_pll_configure(&dvb_pll_lg_tdvs_h06xf, buf,
+					params->frequency, 0)) < 0)
+		return result;
+	else
+		frequency = result;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) {
+		printk(KERN_WARNING "lgh06xf: %s error "
+		       "(addr %02x <- %02x, result = %i)\n",
+		       __FUNCTION__, buf[0], buf[1], result);
+		if (result < 0)
+			return result;
+		else
+			return -EREMOTEIO;
+	}
+
+	/* Set the Auxiliary Byte. */
+	buf[0] = buf[2];
+	buf[0] &= ~0x20;
+	buf[0] |= 0x18;
+	buf[1] = 0x50;
+	msg.len = 2;
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	if ((result = i2c_transfer(priv->i2c, &msg, 1)) != 1) {
+		printk(KERN_WARNING "lgh06xf: %s error "
+		       "(addr %02x <- %02x, result = %i)\n",
+		       __FUNCTION__, buf[0], buf[1], result);
+		if (result < 0)
+			return result;
+		else
+			return -EREMOTEIO;
+	}
+
+	priv->frequency = frequency;
+
+	return 0;
+}
+
+static int lgh06xf_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct lgh06xf_priv *priv = fe->tuner_priv;
+	*frequency = priv->frequency;
+	return 0;
+}
+
+static struct dvb_tuner_ops lgh06xf_tuner_ops = {
+	.release       = lgh06xf_release,
+	.set_params    = lgh06xf_set_params,
+	.get_frequency = lgh06xf_get_frequency,
+};
+
+struct dvb_frontend* lgh06xf_attach(struct dvb_frontend *fe,
+				    struct i2c_adapter *i2c)
+{
+	struct lgh06xf_priv *priv = NULL;
+
+	priv = kzalloc(sizeof(struct lgh06xf_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return NULL;
+
+	priv->i2c = i2c;
+
+	memcpy(&fe->ops.tuner_ops, &lgh06xf_tuner_ops,
+	       sizeof(struct dvb_tuner_ops));
+
+	strlcpy(fe->ops.tuner_ops.info.name, dvb_pll_lg_tdvs_h06xf.name,
+		sizeof(fe->ops.tuner_ops.info.name));
+
+	fe->ops.tuner_ops.info.frequency_min = dvb_pll_lg_tdvs_h06xf.min;
+	fe->ops.tuner_ops.info.frequency_max = dvb_pll_lg_tdvs_h06xf.max;
+
+	fe->tuner_priv = priv;
+	return fe;
+}
+
+EXPORT_SYMBOL(lgh06xf_attach);
+
+MODULE_DESCRIPTION("LG TDVS-H06xF ATSC Tuner support");
+MODULE_AUTHOR("Michael Krufky");
+MODULE_LICENSE("GPL");
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/media/dvb/frontends/lgh06xf.h b/drivers/media/dvb/frontends/lgh06xf.h
new file mode 100644
index 00000000000..510b4bedfb2
--- /dev/null
+++ b/drivers/media/dvb/frontends/lgh06xf.h
@@ -0,0 +1,35 @@
+/*
+ *  lgh06xf.h - ATSC Tuner support for LG TDVS-H06xF
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _LGH06XF_H_
+#define _LGH06XF_H_
+#include "dvb_frontend.h"
+
+#if defined(CONFIG_DVB_TUNER_LGH06XF) || (defined(CONFIG_DVB_TUNER_LGH06XF_MODULE) && defined(MODULE))
+extern struct dvb_frontend* lgh06xf_attach(struct dvb_frontend* fe,
+					    struct i2c_adapter *i2c);
+#else
+static inline struct dvb_frontend* lgh06xf_attach(struct dvb_frontend* fe,
+						  struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+	return NULL;
+}
+#endif /* CONFIG_DVB_TUNER_LGH06XF */
+
+#endif /* _LGH06XF_H_ */
diff --git a/drivers/media/dvb/frontends/lnbp21.h b/drivers/media/dvb/frontends/lnbp21.h
index 1fe1dd17931..68906acf7d6 100644
--- a/drivers/media/dvb/frontends/lnbp21.h
+++ b/drivers/media/dvb/frontends/lnbp21.h
@@ -39,7 +39,7 @@
 
 #include <linux/dvb/frontend.h>
 
-#if defined(CONFIG_DVB_LNBP21) || defined(CONFIG_DVB_LNBP21_MODULE)
+#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) && defined(MODULE))
 /* override_set and override_clear control which system register bits (above) to always set & clear */
 extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear);
 #else
diff --git a/drivers/media/dvb/frontends/mt2060.h b/drivers/media/dvb/frontends/mt2060.h
index 34a37c2b556..0a86eab3a95 100644
--- a/drivers/media/dvb/frontends/mt2060.h
+++ b/drivers/media/dvb/frontends/mt2060.h
@@ -30,6 +30,14 @@ struct mt2060_config {
 	u8 clock_out; /* 0 = off, 1 = CLK/4, 2 = CLK/2, 3 = CLK/1 */
 };
 
+#if defined(CONFIG_DVB_TUNER_MT2060) || (defined(CONFIG_DVB_TUNER_MT2060_MODULE) && defined(MODULE))
 extern struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1);
+#else
+static inline struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
+	return NULL;
+}
+#endif // CONFIG_DVB_TUNER_MT2060
 
 #endif
diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h
index 7112fb4d58a..cf9a1505ad4 100644
--- a/drivers/media/dvb/frontends/mt312.h
+++ b/drivers/media/dvb/frontends/mt312.h
@@ -34,7 +34,7 @@ struct mt312_config
 	u8 demod_address;
 };
 
-#if defined(CONFIG_DVB_MT312) || defined(CONFIG_DVB_MT312_MODULE)
+#if defined(CONFIG_DVB_MT312) || (defined(CONFIG_DVB_MT312_MODULE) && defined(MODULE))
 struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
 					struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/mt352.h b/drivers/media/dvb/frontends/mt352.h
index 0035c2e2d7c..e9964081fd8 100644
--- a/drivers/media/dvb/frontends/mt352.h
+++ b/drivers/media/dvb/frontends/mt352.h
@@ -51,7 +51,7 @@ struct mt352_config
 	int (*demod_init)(struct dvb_frontend* fe);
 };
 
-#if defined(CONFIG_DVB_MT352) || defined(CONFIG_DVB_MT352_MODULE)
+#if defined(CONFIG_DVB_MT352) || (defined(CONFIG_DVB_MT352_MODULE) && defined(MODULE))
 extern struct dvb_frontend* mt352_attach(const struct mt352_config* config,
 					 struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/nxt200x.h b/drivers/media/dvb/frontends/nxt200x.h
index 2eb220e9806..28bc5591b31 100644
--- a/drivers/media/dvb/frontends/nxt200x.h
+++ b/drivers/media/dvb/frontends/nxt200x.h
@@ -45,7 +45,7 @@ struct nxt200x_config
 	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
 };
 
-#if defined(CONFIG_DVB_NXT200X) || defined(CONFIG_DVB_NXT200X_MODULE)
+#if defined(CONFIG_DVB_NXT200X) || (defined(CONFIG_DVB_NXT200X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/nxt6000.h b/drivers/media/dvb/frontends/nxt6000.h
index 9397393a6bd..13d22518356 100644
--- a/drivers/media/dvb/frontends/nxt6000.h
+++ b/drivers/media/dvb/frontends/nxt6000.h
@@ -33,7 +33,7 @@ struct nxt6000_config
 	u8 clock_inversion:1;
 };
 
-#if defined(CONFIG_DVB_NXT6000) || defined(CONFIG_DVB_NXT6000_MODULE)
+#if defined(CONFIG_DVB_NXT6000) || (defined(CONFIG_DVB_NXT6000_MODULE) && defined(MODULE))
 extern struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index d20ab30c1e8..5a3a6e53cda 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -40,6 +40,7 @@
 #include <linux/slab.h>
 #include <asm/byteorder.h>
 
+#include "dvb_math.h"
 #include "dvb_frontend.h"
 #include "dvb-pll.h"
 #include "or51132.h"
@@ -62,6 +63,7 @@ struct or51132_state
 
 	/* Demodulator private data */
 	fe_modulation_t current_modulation;
+	u32 snr; /* Result of last SNR calculation */
 
 	/* Tuner private data */
 	u32 current_frequency;
@@ -465,124 +467,128 @@ static int or51132_read_status(struct dvb_frontend* fe, fe_status_t* status)
 	return 0;
 }
 
-/* log10-1 table at .5 increments from 1 to 100.5 */
-static unsigned int i100x20log10[] = {
-     0,  352,  602,  795,  954, 1088, 1204, 1306, 1397, 1480,
-  1556, 1625, 1690, 1750, 1806, 1858, 1908, 1955, 2000, 2042,
-  2082, 2121, 2158, 2193, 2227, 2260, 2292, 2322, 2352, 2380,
-  2408, 2434, 2460, 2486, 2510, 2534, 2557, 2580, 2602, 2623,
-  2644, 2664, 2684, 2704, 2723, 2742, 2760, 2778, 2795, 2813,
-  2829, 2846, 2862, 2878, 2894, 2909, 2924, 2939, 2954, 2968,
-  2982, 2996, 3010, 3023, 3037, 3050, 3062, 3075, 3088, 3100,
-  3112, 3124, 3136, 3148, 3159, 3170, 3182, 3193, 3204, 3214,
-  3225, 3236, 3246, 3256, 3266, 3276, 3286, 3296, 3306, 3316,
-  3325, 3334, 3344, 3353, 3362, 3371, 3380, 3389, 3397, 3406,
-  3415, 3423, 3432, 3440, 3448, 3456, 3464, 3472, 3480, 3488,
-  3496, 3504, 3511, 3519, 3526, 3534, 3541, 3549, 3556, 3563,
-  3570, 3577, 3584, 3591, 3598, 3605, 3612, 3619, 3625, 3632,
-  3639, 3645, 3652, 3658, 3665, 3671, 3677, 3683, 3690, 3696,
-  3702, 3708, 3714, 3720, 3726, 3732, 3738, 3744, 3750, 3755,
-  3761, 3767, 3772, 3778, 3784, 3789, 3795, 3800, 3806, 3811,
-  3816, 3822, 3827, 3832, 3838, 3843, 3848, 3853, 3858, 3863,
-  3868, 3874, 3879, 3884, 3888, 3893, 3898, 3903, 3908, 3913,
-  3918, 3922, 3927, 3932, 3936, 3941, 3946, 3950, 3955, 3960,
-  3964, 3969, 3973, 3978, 3982, 3986, 3991, 3995, 4000, 4004,
-};
+/* Calculate SNR estimation (scaled by 2^24)
 
-static unsigned int denom[] = {1,1,100,1000,10000,100000,1000000,10000000,100000000};
+   8-VSB SNR and QAM equations from Oren datasheets
 
-static unsigned int i20Log10(unsigned short val)
-{
-	unsigned int rntval = 100;
-	unsigned int tmp = val;
-	unsigned int exp = 1;
+   For 8-VSB:
+     SNR[dB] = 10 * log10(897152044.8282 / MSE^2 ) - K
+
+     Where K = 0 if NTSC rejection filter is OFF; and
+	   K = 3 if NTSC rejection filter is ON
+
+   For QAM64:
+     SNR[dB] = 10 * log10(897152044.8282 / MSE^2 )
 
-	while(tmp > 100) {tmp /= 100; exp++;}
+   For QAM256:
+     SNR[dB] = 10 * log10(907832426.314266  / MSE^2 )
 
-	val = (2 * val)/denom[exp];
-	if (exp > 1) rntval = 2000*exp;
+   We re-write the snr equation as:
+     SNR * 2^24 = 10*(c - 2*intlog10(MSE))
+   Where for QAM256, c = log10(907832426.314266) * 2^24
+   and for 8-VSB and QAM64, c = log10(897152044.8282) * 2^24 */
 
-	rntval += i100x20log10[val];
-	return rntval;
+static u32 calculate_snr(u32 mse, u32 c)
+{
+	if (mse == 0) /* No signal */
+		return 0;
+
+	mse = 2*intlog10(mse);
+	if (mse > c) {
+		/* Negative SNR, which is possible, but realisticly the
+		demod will lose lock before the signal gets this bad.  The
+		API only allows for unsigned values, so just return 0 */
+		return 0;
+	}
+	return 10*(c - mse);
 }
 
-static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+static int or51132_read_snr(struct dvb_frontend* fe, u16* snr)
 {
 	struct or51132_state* state = fe->demodulator_priv;
-	unsigned char rec_buf[2];
-	unsigned char snd_buf[2];
-	u8 rcvr_stat;
-	u16 snr_equ;
-	u32 signal_strength;
-	int usK;
+	u8 rec_buf[2];
+	u8 snd_buf[2];
+	u32 noise;
+	u32 c;
+	u32 usK;
 
+	/* Register is same for VSB or QAM firmware */
 	snd_buf[0]=0x04;
 	snd_buf[1]=0x02; /* SNR after Equalizer */
 	msleep(30); /* 30ms */
 	if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
-		printk(KERN_WARNING "or51132: read_status write error\n");
-		return -1;
+		printk(KERN_WARNING "or51132: snr write error\n");
+		return -EREMOTEIO;
 	}
 	msleep(30); /* 30ms */
 	if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
-		printk(KERN_WARNING "or51132: read_status read error\n");
-		return -1;
+		printk(KERN_WARNING "or51132: snr read error\n");
+		return -EREMOTEIO;
 	}
-	snr_equ = rec_buf[0] | (rec_buf[1] << 8);
-	dprintk("read_signal_strength snr_equ %x %x (%i)\n",rec_buf[0],rec_buf[1],snr_equ);
+	noise = rec_buf[0] | (rec_buf[1] << 8);
+	dprintk("read_snr noise %x %x (%i)\n",rec_buf[0],rec_buf[1],noise);
 
-	/* Receiver Status */
+	/* Read status, contains modulation type for QAM_AUTO and
+	   NTSC filter for VSB */
 	snd_buf[0]=0x04;
-	snd_buf[1]=0x00;
+	snd_buf[1]=0x00; /* Status register */
 	msleep(30); /* 30ms */
 	if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
-		printk(KERN_WARNING "or51132: read_signal_strength read_status write error\n");
-		return -1;
+		printk(KERN_WARNING "or51132: status write error\n");
+		return -EREMOTEIO;
 	}
 	msleep(30); /* 30ms */
 	if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
-		printk(KERN_WARNING "or51132: read_signal_strength read_status read error\n");
-		return -1;
+		printk(KERN_WARNING "or51132: status read error\n");
+		return -EREMOTEIO;
 	}
-	dprintk("read_signal_strength read_status %x %x\n",rec_buf[0],rec_buf[1]);
-	rcvr_stat = rec_buf[1];
-	usK = (rcvr_stat & 0x10) ? 3 : 0;
 
-	/* The value reported back from the frontend will be FFFF=100% 0000=0% */
-	signal_strength = (((8952 - i20Log10(snr_equ) - usK*100)/3+5)*65535)/1000;
-	if (signal_strength > 0xffff)
-		*strength = 0xffff;
-	else
-		*strength = signal_strength;
-	dprintk("read_signal_strength %i\n",*strength);
+	usK = 0;
+	switch (rec_buf[0]) {
+	case 0x06:
+		usK = (rec_buf[1] & 0x10) ? 0x03000000 : 0;
+		/* Fall through to QAM64 case */
+	case 0x43:
+		c = 150204167;
+		break;
+	case 0x45:
+		c = 150290396;
+		break;
+	default:
+		printk(KERN_ERR "or51132: unknown status 0x%02x\n", rec_buf[0]);
+		return -EREMOTEIO;
+	}
+	dprintk("%s: modulation %02x, NTSC rej O%s\n", __FUNCTION__,
+		rec_buf[0], rec_buf[1]&0x10?"n":"ff");
+
+	/* Calculate SNR using noise, c, and NTSC rejection correction */
+	state->snr = calculate_snr(noise, c) - usK;
+	*snr = (state->snr) >> 16;
+
+	dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __FUNCTION__, noise,
+		state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
 
 	return 0;
 }
 
-static int or51132_read_snr(struct dvb_frontend* fe, u16* snr)
+static int or51132_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-	struct or51132_state* state = fe->demodulator_priv;
-	unsigned char rec_buf[2];
-	unsigned char snd_buf[2];
-	u16 snr_equ;
-
-	snd_buf[0]=0x04;
-	snd_buf[1]=0x02; /* SNR after Equalizer */
-	msleep(30); /* 30ms */
-	if (i2c_writebytes(state,state->config->demod_address,snd_buf,2)) {
-		printk(KERN_WARNING "or51132: read_snr write error\n");
-		return -1;
-	}
-	msleep(30); /* 30ms */
-	if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
-		printk(KERN_WARNING "or51132: read_snr dvr read error\n");
-		return -1;
-	}
-	snr_equ = rec_buf[0] | (rec_buf[1] << 8);
-	dprintk("read_snr snr_equ %x %x (%i)\n",rec_buf[0],rec_buf[1],snr_equ);
+	/* Calculate Strength from SNR up to 35dB */
+	/* Even though the SNR can go higher than 35dB, there is some comfort */
+	/* factor in having a range of strong signals that can show at 100%   */
+	struct or51132_state* state = (struct or51132_state*) fe->demodulator_priv;
+	u16 snr;
+	int ret;
 
-	*snr = 0xFFFF - snr_equ;
-	dprintk("read_snr %i\n",*snr);
+	ret = fe->ops.read_snr(fe, &snr);
+	if (ret != 0)
+		return ret;
+	/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
+	/* scale the range 0 - 35*2^24 into 0 - 65535 */
+	if (state->snr >= 8960 * 0x10000)
+		*strength = 0xffff;
+	else
+		*strength = state->snr / 8960;
 
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/or51132.h b/drivers/media/dvb/frontends/or51132.h
index 9718be4fb83..add24f0a743 100644
--- a/drivers/media/dvb/frontends/or51132.h
+++ b/drivers/media/dvb/frontends/or51132.h
@@ -34,7 +34,7 @@ struct or51132_config
 	int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured);
 };
 
-#if defined(CONFIG_DVB_OR51132) || defined(CONFIG_DVB_OR51132_MODULE)
+#if defined(CONFIG_DVB_OR51132) || (defined(CONFIG_DVB_OR51132_MODULE) && defined(MODULE))
 extern struct dvb_frontend* or51132_attach(const struct or51132_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/or51211.c b/drivers/media/dvb/frontends/or51211.c
index 2bf124b5368..048d7cfe12d 100644
--- a/drivers/media/dvb/frontends/or51211.c
+++ b/drivers/media/dvb/frontends/or51211.c
@@ -39,6 +39,7 @@
 #include <linux/slab.h>
 #include <asm/byteorder.h>
 
+#include "dvb_math.h"
 #include "dvb_frontend.h"
 #include "or51211.h"
 
@@ -63,6 +64,7 @@ struct or51211_state {
 
 	/* Demodulator private data */
 	u8 initialized:1;
+	u32 snr; /* Result of last SNR claculation */
 
 	/* Tuner private data */
 	u32 current_frequency;
@@ -292,107 +294,81 @@ static int or51211_read_status(struct dvb_frontend* fe, fe_status_t* status)
 	return 0;
 }
 
-/* log10-1 table at .5 increments from 1 to 100.5 */
-static unsigned int i100x20log10[] = {
-		0,  352,  602,  795,  954, 1088, 1204, 1306, 1397, 1480,
-	 1556, 1625, 1690, 1750, 1806, 1858, 1908, 1955, 2000, 2042,
-	 2082, 2121, 2158, 2193, 2227, 2260, 2292, 2322, 2352, 2380,
-	 2408, 2434, 2460, 2486, 2510, 2534, 2557, 2580, 2602, 2623,
-	 2644, 2664, 2684, 2704, 2723, 2742, 2760, 2778, 2795, 2813,
-	 2829, 2846, 2862, 2878, 2894, 2909, 2924, 2939, 2954, 2968,
-	 2982, 2996, 3010, 3023, 3037, 3050, 3062, 3075, 3088, 3100,
-	 3112, 3124, 3136, 3148, 3159, 3170, 3182, 3193, 3204, 3214,
-	 3225, 3236, 3246, 3256, 3266, 3276, 3286, 3296, 3306, 3316,
-	 3325, 3334, 3344, 3353, 3362, 3371, 3380, 3389, 3397, 3406,
-	 3415, 3423, 3432, 3440, 3448, 3456, 3464, 3472, 3480, 3488,
-	 3496, 3504, 3511, 3519, 3526, 3534, 3541, 3549, 3556, 3563,
-	 3570, 3577, 3584, 3591, 3598, 3605, 3612, 3619, 3625, 3632,
-	 3639, 3645, 3652, 3658, 3665, 3671, 3677, 3683, 3690, 3696,
-	 3702, 3708, 3714, 3720, 3726, 3732, 3738, 3744, 3750, 3755,
-	 3761, 3767, 3772, 3778, 3784, 3789, 3795, 3800, 3806, 3811,
-	 3816, 3822, 3827, 3832, 3838, 3843, 3848, 3853, 3858, 3863,
-	 3868, 3874, 3879, 3884, 3888, 3893, 3898, 3903, 3908, 3913,
-	 3918, 3922, 3927, 3932, 3936, 3941, 3946, 3950, 3955, 3960,
-	 3964, 3969, 3973, 3978, 3982, 3986, 3991, 3995, 4000, 4004,
-};
-
-static unsigned int denom[] = {1,1,100,1000,10000,100000,1000000,10000000,100000000};
+/* Calculate SNR estimation (scaled by 2^24)
 
-static unsigned int i20Log10(unsigned short val)
-{
-	unsigned int rntval = 100;
-	unsigned int tmp = val;
-	unsigned int exp = 1;
+   8-VSB SNR equation from Oren datasheets
 
-	while(tmp > 100) {tmp /= 100; exp++;}
+   For 8-VSB:
+     SNR[dB] = 10 * log10(219037.9454 / MSE^2 )
 
-	val = (2 * val)/denom[exp];
-	if (exp > 1) rntval = 2000*exp;
+   We re-write the snr equation as:
+     SNR * 2^24 = 10*(c - 2*intlog10(MSE))
+   Where for 8-VSB, c = log10(219037.9454) * 2^24 */
 
-	rntval += i100x20log10[val];
-	return rntval;
+static u32 calculate_snr(u32 mse, u32 c)
+{
+	if (mse == 0) /* No signal */
+		return 0;
+
+	mse = 2*intlog10(mse);
+	if (mse > c) {
+		/* Negative SNR, which is possible, but realisticly the
+		demod will lose lock before the signal gets this bad.  The
+		API only allows for unsigned values, so just return 0 */
+		return 0;
+	}
+	return 10*(c - mse);
 }
 
-static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength)
+static int or51211_read_snr(struct dvb_frontend* fe, u16* snr)
 {
 	struct or51211_state* state = fe->demodulator_priv;
 	u8 rec_buf[2];
-	u8 snd_buf[4];
-	u8 snr_equ;
-	u32 signal_strength;
+	u8 snd_buf[3];
 
 	/* SNR after Equalizer */
 	snd_buf[0] = 0x04;
 	snd_buf[1] = 0x00;
 	snd_buf[2] = 0x04;
-	snd_buf[3] = 0x00;
 
 	if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
-		printk(KERN_WARNING "or51211: read_status write error\n");
+		printk(KERN_WARNING "%s: error writing snr reg\n",
+		       __FUNCTION__);
 		return -1;
 	}
-	msleep(3);
 	if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
-		printk(KERN_WARNING "or51211: read_status read error\n");
+		printk(KERN_WARNING "%s: read_status read error\n",
+		       __FUNCTION__);
 		return -1;
 	}
-	snr_equ = rec_buf[0] & 0xff;
 
-	/* The value reported back from the frontend will be FFFF=100% 0000=0% */
-	signal_strength = (((5334 - i20Log10(snr_equ))/3+5)*65535)/1000;
-	if (signal_strength > 0xffff)
-		*strength = 0xffff;
-	else
-		*strength = signal_strength;
-	dprintk("read_signal_strength %i\n",*strength);
+	state->snr = calculate_snr(rec_buf[0], 89599047);
+	*snr = (state->snr) >> 16;
+
+	dprintk("%s: noise = 0x%02x, snr = %d.%02d dB\n", __FUNCTION__, rec_buf[0],
+		state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
 
 	return 0;
 }
 
-static int or51211_read_snr(struct dvb_frontend* fe, u16* snr)
+static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
-	struct or51211_state* state = fe->demodulator_priv;
-	u8 rec_buf[2];
-	u8 snd_buf[4];
-
-	/* SNR after Equalizer */
-	snd_buf[0] = 0x04;
-	snd_buf[1] = 0x00;
-	snd_buf[2] = 0x04;
-	snd_buf[3] = 0x00;
-
-	if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
-		printk(KERN_WARNING "or51211: read_status write error\n");
-		return -1;
-	}
-	msleep(3);
-	if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
-		printk(KERN_WARNING "or51211: read_status read error\n");
-		return -1;
-	}
-	*snr = rec_buf[0] & 0xff;
-
-	dprintk("read_snr %i\n",*snr);
+	/* Calculate Strength from SNR up to 35dB */
+	/* Even though the SNR can go higher than 35dB, there is some comfort */
+	/* factor in having a range of strong signals that can show at 100%   */
+	struct or51211_state* state = (struct or51211_state*)fe->demodulator_priv;
+	u16 snr;
+	int ret;
+
+	ret = fe->ops.read_snr(fe, &snr);
+	if (ret != 0)
+		return ret;
+	/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
+	/* scale the range 0 - 35*2^24 into 0 - 65535 */
+	if (state->snr >= 8960 * 0x10000)
+		*strength = 0xffff;
+	else
+		*strength = state->snr / 8960;
 
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/or51211.h b/drivers/media/dvb/frontends/or51211.h
index 10a5419f9e0..8aad8402d61 100644
--- a/drivers/media/dvb/frontends/or51211.h
+++ b/drivers/media/dvb/frontends/or51211.h
@@ -37,7 +37,7 @@ struct or51211_config
 	void (*sleep)(struct dvb_frontend * fe);
 };
 
-#if defined(CONFIG_DVB_OR51211) || defined(CONFIG_DVB_OR51211_MODULE)
+#if defined(CONFIG_DVB_OR51211) || (defined(CONFIG_DVB_OR51211_MODULE) && defined(MODULE))
 extern struct dvb_frontend* or51211_attach(const struct or51211_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h
index efc54d7f3c5..1555870f722 100644
--- a/drivers/media/dvb/frontends/s5h1420.h
+++ b/drivers/media/dvb/frontends/s5h1420.h
@@ -34,7 +34,7 @@ struct s5h1420_config
 	u8 invert:1;
 };
 
-#if defined(CONFIG_DVB_S5H1420) || defined(CONFIG_DVB_S5H1420_MODULE)
+#if defined(CONFIG_DVB_S5H1420) || (defined(CONFIG_DVB_S5H1420_MODULE) && defined(MODULE))
 extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config,
 	     struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/sp8870.h b/drivers/media/dvb/frontends/sp8870.h
index 4cf27d3b10f..909cefe7139 100644
--- a/drivers/media/dvb/frontends/sp8870.h
+++ b/drivers/media/dvb/frontends/sp8870.h
@@ -35,7 +35,7 @@ struct sp8870_config
 	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
 };
 
-#if defined(CONFIG_DVB_SP8870) || defined(CONFIG_DVB_SP8870_MODULE)
+#if defined(CONFIG_DVB_SP8870) || (defined(CONFIG_DVB_SP8870_MODULE) && defined(MODULE))
 extern struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
 					  struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/sp887x.h b/drivers/media/dvb/frontends/sp887x.h
index cab7ea644df..7ee78d7d916 100644
--- a/drivers/media/dvb/frontends/sp887x.h
+++ b/drivers/media/dvb/frontends/sp887x.h
@@ -17,7 +17,7 @@ struct sp887x_config
 	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
 };
 
-#if defined(CONFIG_DVB_SP887X) || defined(CONFIG_DVB_SP887X_MODULE)
+#if defined(CONFIG_DVB_SP887X) || (defined(CONFIG_DVB_SP887X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* sp887x_attach(const struct sp887x_config* config,
 					  struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/stv0297.h b/drivers/media/dvb/frontends/stv0297.h
index 760b80db43a..69f4515df2b 100644
--- a/drivers/media/dvb/frontends/stv0297.h
+++ b/drivers/media/dvb/frontends/stv0297.h
@@ -42,7 +42,7 @@ struct stv0297_config
 	u8 stop_during_read:1;
 };
 
-#if defined(CONFIG_DVB_STV0297) || defined(CONFIG_DVB_STV0297_MODULE)
+#if defined(CONFIG_DVB_STV0297) || (defined(CONFIG_DVB_STV0297_MODULE) && defined(MODULE))
 extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/stv0299.h b/drivers/media/dvb/frontends/stv0299.h
index 7ef25207081..33df9495908 100644
--- a/drivers/media/dvb/frontends/stv0299.h
+++ b/drivers/media/dvb/frontends/stv0299.h
@@ -89,7 +89,7 @@ struct stv0299_config
 	int (*set_symbol_rate)(struct dvb_frontend* fe, u32 srate, u32 ratio);
 };
 
-#if defined(CONFIG_DVB_STV0299) || defined(CONFIG_DVB_STV0299_MODULE)
+#if defined(CONFIG_DVB_STV0299) || (defined(CONFIG_DVB_STV0299_MODULE) && defined(MODULE))
 extern struct dvb_frontend* stv0299_attach(const struct stv0299_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/tda10021.h b/drivers/media/dvb/frontends/tda10021.h
index d68ae20c841..e3da780108f 100644
--- a/drivers/media/dvb/frontends/tda10021.h
+++ b/drivers/media/dvb/frontends/tda10021.h
@@ -32,7 +32,7 @@ struct tda10021_config
 	u8 demod_address;
 };
 
-#if defined(CONFIG_DVB_TDA10021) || defined(CONFIG_DVB_TDA10021_MODULE)
+#if defined(CONFIG_DVB_TDA10021) || (defined(CONFIG_DVB_TDA10021_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda10021_attach(const struct tda10021_config* config,
 					    struct i2c_adapter* i2c, u8 pwm);
 #else
diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c
index 11e0dca9a2d..00e4bcd9f1a 100644
--- a/drivers/media/dvb/frontends/tda1004x.c
+++ b/drivers/media/dvb/frontends/tda1004x.c
@@ -648,18 +648,24 @@ static int tda10046_init(struct dvb_frontend* fe)
 		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup
 		tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x00); // set AGC polarities
 		break;
-	case TDA10046_AGC_TDA827X:
+	case TDA10046_AGC_TDA827X_GP11:
 		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
 		tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
 		tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
 		tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x6a); // set AGC polarities
 		break;
-	case TDA10046_AGC_TDA827X_GPL:
+	case TDA10046_AGC_TDA827X_GP00:
 		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
 		tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
 		tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
 		tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities
 		break;
+	case TDA10046_AGC_TDA827X_GP01:
+		tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02);   // AGC setup
+		tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70);    // AGC Threshold
+		tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x08); // Gain Renormalize
+		tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x62); // set AGC polarities
+		break;
 	}
 	tda1004x_write_byteI(state, TDA1004X_CONFADC2, 0x38);
 	tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on
diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h
index e28fca05734..ec502d71b83 100644
--- a/drivers/media/dvb/frontends/tda1004x.h
+++ b/drivers/media/dvb/frontends/tda1004x.h
@@ -35,8 +35,9 @@ enum tda10046_agc {
 	TDA10046_AGC_DEFAULT,		/* original configuration */
 	TDA10046_AGC_IFO_AUTO_NEG,	/* IF AGC only, automatic, negtive */
 	TDA10046_AGC_IFO_AUTO_POS,	/* IF AGC only, automatic, positive */
-	TDA10046_AGC_TDA827X,		/* IF AGC only, special setup for tda827x */
-	TDA10046_AGC_TDA827X_GPL,	/* same as above, but GPIOs 0 */
+	TDA10046_AGC_TDA827X_GP11,	/* IF AGC only, special setup for tda827x */
+	TDA10046_AGC_TDA827X_GP00,	/* same as above, but GPIOs 0 */
+	TDA10046_AGC_TDA827X_GP01,	/* same as above, but GPIO3=0 GPIO1=1*/
 };
 
 enum tda10046_if {
@@ -71,7 +72,7 @@ struct tda1004x_config
 	int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
 };
 
-#if defined(CONFIG_DVB_TDA1004X) || defined(CONFIG_DVB_TDA1004X_MODULE)
+#if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
 					    struct i2c_adapter* i2c);
 
diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c
index 7456b0b9976..4c27a2d90a3 100644
--- a/drivers/media/dvb/frontends/tda10086.c
+++ b/drivers/media/dvb/frontends/tda10086.c
@@ -441,6 +441,10 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_pa
 
 	dprintk ("%s\n", __FUNCTION__);
 
+	// check for invalid symbol rate
+	if (fe_params->u.qpsk.symbol_rate < 500000)
+		return -EINVAL;
+
 	// calculate the updated frequency (note: we convert from Hz->kHz)
 	tmp64 = tda10086_read_byte(state, 0x52);
 	tmp64 |= (tda10086_read_byte(state, 0x51) << 8);
diff --git a/drivers/media/dvb/frontends/tda10086.h b/drivers/media/dvb/frontends/tda10086.h
index 18457adee30..ed584a8f4a8 100644
--- a/drivers/media/dvb/frontends/tda10086.h
+++ b/drivers/media/dvb/frontends/tda10086.h
@@ -35,7 +35,7 @@ struct tda10086_config
 	u8 invert;
 };
 
-#if defined(CONFIG_DVB_TDA10086) || defined(CONFIG_DVB_TDA10086_MODULE)
+#if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
 					    struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/tda8083.c b/drivers/media/dvb/frontends/tda8083.c
index 3aa45ebbac3..67415c9db6f 100644
--- a/drivers/media/dvb/frontends/tda8083.c
+++ b/drivers/media/dvb/frontends/tda8083.c
@@ -262,12 +262,29 @@ static int tda8083_read_status(struct dvb_frontend* fe, fe_status_t* status)
 	if (sync & 0x10)
 		*status |= FE_HAS_SYNC;
 
+	if (sync & 0x20) /* frontend can not lock */
+		*status |= FE_TIMEDOUT;
+
 	if ((sync & 0x1f) == 0x1f)
 		*status |= FE_HAS_LOCK;
 
 	return 0;
 }
 
+static int tda8083_read_ber(struct dvb_frontend* fe, u32* ber)
+{
+	struct tda8083_state* state = fe->demodulator_priv;
+	int ret;
+	u8 buf[3];
+
+	if ((ret = tda8083_readregs(state, 0x0b, buf, sizeof(buf))))
+		return ret;
+
+	*ber = ((buf[0] & 0x1f) << 16) | (buf[1] << 8) | buf[2];
+
+	return 0;
+}
+
 static int tda8083_read_signal_strength(struct dvb_frontend* fe, u16* strength)
 {
 	struct tda8083_state* state = fe->demodulator_priv;
@@ -288,6 +305,17 @@ static int tda8083_read_snr(struct dvb_frontend* fe, u16* snr)
 	return 0;
 }
 
+static int tda8083_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
+{
+	struct tda8083_state* state = fe->demodulator_priv;
+
+	*ucblocks = tda8083_readreg(state, 0x0f);
+	if (*ucblocks == 0xff)
+		*ucblocks = 0xffffffff;
+
+	return 0;
+}
+
 static int tda8083_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
 {
 	struct tda8083_state* state = fe->demodulator_priv;
@@ -440,6 +468,8 @@ static struct dvb_frontend_ops tda8083_ops = {
 	.read_status = tda8083_read_status,
 	.read_signal_strength = tda8083_read_signal_strength,
 	.read_snr = tda8083_read_snr,
+	.read_ber = tda8083_read_ber,
+	.read_ucblocks = tda8083_read_ucblocks,
 
 	.diseqc_send_master_cmd = tda8083_send_diseqc_msg,
 	.diseqc_send_burst = tda8083_diseqc_send_burst,
diff --git a/drivers/media/dvb/frontends/tda8083.h b/drivers/media/dvb/frontends/tda8083.h
index aae15bdce6e..2d3307999f2 100644
--- a/drivers/media/dvb/frontends/tda8083.h
+++ b/drivers/media/dvb/frontends/tda8083.h
@@ -35,7 +35,7 @@ struct tda8083_config
 	u8 demod_address;
 };
 
-#if defined(CONFIG_DVB_TDA8083) || defined(CONFIG_DVB_TDA8083_MODULE)
+#if defined(CONFIG_DVB_TDA8083) || (defined(CONFIG_DVB_TDA8083_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda8083_attach(const struct tda8083_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/tda826x.c b/drivers/media/dvb/frontends/tda826x.c
index eeab26bd36e..79f971dc52b 100644
--- a/drivers/media/dvb/frontends/tda826x.c
+++ b/drivers/media/dvb/frontends/tda826x.c
@@ -42,8 +42,7 @@ struct tda826x_priv {
 
 static int tda826x_release(struct dvb_frontend *fe)
 {
-	if (fe->tuner_priv)
-		kfree(fe->tuner_priv);
+	kfree(fe->tuner_priv);
 	fe->tuner_priv = NULL;
 	return 0;
 }
@@ -121,7 +120,7 @@ static struct dvb_tuner_ops tda826x_tuner_ops = {
 	.info = {
 		.name = "Philips TDA826X",
 		.frequency_min = 950000,
-		.frequency_min = 2175000
+		.frequency_max = 2175000
 	},
 	.release = tda826x_release,
 	.sleep = tda826x_sleep,
@@ -133,18 +132,21 @@ struct dvb_frontend *tda826x_attach(struct dvb_frontend *fe, int addr, struct i2
 {
 	struct tda826x_priv *priv = NULL;
 	u8 b1 [] = { 0, 0 };
-	struct i2c_msg msg = { .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 };
+	struct i2c_msg msg[2] = {
+		{ .addr = addr, .flags = 0,        .buf = NULL, .len = 0 },
+		{ .addr = addr, .flags = I2C_M_RD, .buf = b1, .len = 2 }
+	};
 	int ret;
 
 	dprintk("%s:\n", __FUNCTION__);
 
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 1);
-	ret = i2c_transfer (i2c, &msg, 1);
+	ret = i2c_transfer (i2c, msg, 2);
 	if (fe->ops.i2c_gate_ctrl)
 		fe->ops.i2c_gate_ctrl(fe, 0);
 
-	if (ret != 1)
+	if (ret != 2)
 		return NULL;
 	if (!(b1[1] & 0x80))
 		return NULL;
diff --git a/drivers/media/dvb/frontends/tda826x.h b/drivers/media/dvb/frontends/tda826x.h
index 83998c00119..ad998119596 100644
--- a/drivers/media/dvb/frontends/tda826x.h
+++ b/drivers/media/dvb/frontends/tda826x.h
@@ -35,7 +35,7 @@
  * @param has_loopthrough Set to 1 if the card has a loopthrough RF connector.
  * @return FE pointer on success, NULL on failure.
  */
-#if defined(CONFIG_DVB_TDA826X) || defined(CONFIG_DVB_TDA826X_MODULE)
+#if defined(CONFIG_DVB_TDA826X) || (defined(CONFIG_DVB_TDA826X_MODULE) && defined(MODULE))
 extern struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe, int addr,
 					   struct i2c_adapter *i2c,
 					   int has_loopthrough);
diff --git a/drivers/media/dvb/frontends/tua6100.c b/drivers/media/dvb/frontends/tua6100.c
index 88554393a9b..6ba0029dcf2 100644
--- a/drivers/media/dvb/frontends/tua6100.c
+++ b/drivers/media/dvb/frontends/tua6100.c
@@ -43,8 +43,7 @@ struct tua6100_priv {
 
 static int tua6100_release(struct dvb_frontend *fe)
 {
-	if (fe->tuner_priv)
-		kfree(fe->tuner_priv);
+	kfree(fe->tuner_priv);
 	fe->tuner_priv = NULL;
 	return 0;
 }
diff --git a/drivers/media/dvb/frontends/tua6100.h b/drivers/media/dvb/frontends/tua6100.h
index 8f98033ffa7..03a665e7df6 100644
--- a/drivers/media/dvb/frontends/tua6100.h
+++ b/drivers/media/dvb/frontends/tua6100.h
@@ -34,7 +34,7 @@
 #include <linux/i2c.h>
 #include "dvb_frontend.h"
 
-#if defined(CONFIG_DVB_TUA6100) || defined(CONFIG_DVB_TUA6100_MODULE)
+#if defined(CONFIG_DVB_TUA6100) || (defined(CONFIG_DVB_TUA6100_MODULE) && defined(MODULE))
 extern struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c);
 #else
 static inline struct dvb_frontend* tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c)
diff --git a/drivers/media/dvb/frontends/ves1820.h b/drivers/media/dvb/frontends/ves1820.h
index f0c9dded39d..e4a2a324046 100644
--- a/drivers/media/dvb/frontends/ves1820.h
+++ b/drivers/media/dvb/frontends/ves1820.h
@@ -41,7 +41,7 @@ struct ves1820_config
 	u8 selagc:1;
 };
 
-#if defined(CONFIG_DVB_VES1820) || defined(CONFIG_DVB_VES1820_MODULE)
+#if defined(CONFIG_DVB_VES1820) || (defined(CONFIG_DVB_VES1820_MODULE) && defined(MODULE))
 extern struct dvb_frontend* ves1820_attach(const struct ves1820_config* config,
 					   struct i2c_adapter* i2c, u8 pwm);
 #else
diff --git a/drivers/media/dvb/frontends/ves1x93.h b/drivers/media/dvb/frontends/ves1x93.h
index 395fed39b28..d507f8966f8 100644
--- a/drivers/media/dvb/frontends/ves1x93.h
+++ b/drivers/media/dvb/frontends/ves1x93.h
@@ -40,7 +40,7 @@ struct ves1x93_config
 	u8 invert_pwm:1;
 };
 
-#if defined(CONFIG_DVB_VES1X93) || defined(CONFIG_DVB_VES1X93_MODULE)
+#if defined(CONFIG_DVB_VES1X93) || (defined(CONFIG_DVB_VES1X93_MODULE) && defined(MODULE))
 extern struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
 					   struct i2c_adapter* i2c);
 #else
diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h
index 79a947215c4..0bc0109737f 100644
--- a/drivers/media/dvb/frontends/zl10353.h
+++ b/drivers/media/dvb/frontends/zl10353.h
@@ -36,7 +36,7 @@ struct zl10353_config
 	int parallel_ts;
 };
 
-#if defined(CONFIG_DVB_ZL10353) || defined(CONFIG_DVB_ZL10353_MODULE)
+#if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE))
 extern struct dvb_frontend* zl10353_attach(const struct zl10353_config *config,
 					   struct i2c_adapter *i2c);
 #else
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index 8e4ce101eb2..ffda71dfdd6 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -650,7 +650,7 @@ static int __devinit pluto2_probe(struct pci_dev *pdev,
 	/* dvb */
 	ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, THIS_MODULE, &pdev->dev);
 	if (ret < 0)
-		goto err_i2c_bit_del_bus;
+		goto err_i2c_del_adapter;
 
 	dvb_adapter = &pluto->dvb_adapter;
 
@@ -712,8 +712,8 @@ err_dvb_dmx_release:
 	dvb_dmx_release(dvbdemux);
 err_dvb_unregister_adapter:
 	dvb_unregister_adapter(dvb_adapter);
-err_i2c_bit_del_bus:
-	i2c_bit_del_bus(&pluto->i2c_adap);
+err_i2c_del_adapter:
+	i2c_del_adapter(&pluto->i2c_adap);
 err_pluto_hw_exit:
 	pluto_hw_exit(pluto);
 err_free_irq:
@@ -748,7 +748,7 @@ static void __devexit pluto2_remove(struct pci_dev *pdev)
 	dvb_dmxdev_release(&pluto->dmxdev);
 	dvb_dmx_release(dvbdemux);
 	dvb_unregister_adapter(dvb_adapter);
-	i2c_bit_del_bus(&pluto->i2c_adap);
+	i2c_del_adapter(&pluto->i2c_adap);
 	pluto_hw_exit(pluto);
 	free_irq(pdev->irq, pluto);
 	pci_iounmap(pdev, pluto->io_mem);
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index 95531a62499..eec7ccf41f8 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -92,6 +92,7 @@ config DVB_BUDGET_CI
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+	select VIDEO_IR
 	help
 	  Support for simple SAA7146 based DVB cards
 	  (so called Budget- or Nova-PCI cards) without onboard
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index bba23bcd1b1..366c1371ee9 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -2828,7 +2828,7 @@ MODULE_DEVICE_TABLE(pci, pci_tbl);
 
 static struct saa7146_extension av7110_extension = {
 	.name		= "dvb",
-	.flags		= SAA7146_I2C_SHORT_DELAY,
+	.flags		= SAA7146_USE_I2C_IRQ,
 
 	.module		= THIS_MODULE,
 	.pci_tbl	= &pci_tbl[0],
diff --git a/drivers/media/dvb/ttpci/av7110_ir.c b/drivers/media/dvb/ttpci/av7110_ir.c
index d54bbcdde2c..e4544ea2b89 100644
--- a/drivers/media/dvb/ttpci/av7110_ir.c
+++ b/drivers/media/dvb/ttpci/av7110_ir.c
@@ -48,7 +48,8 @@ static void av7110_emit_keyup(unsigned long data)
 	if (!data || !test_bit(data, input_dev->key))
 		return;
 
-	input_event(input_dev, EV_KEY, data, !!0);
+	input_report_key(input_dev, data, 0);
+	input_sync(input_dev);
 }
 
 
@@ -115,14 +116,17 @@ static void av7110_emit_key(unsigned long parm)
 		del_timer(&keyup_timer);
 		if (keyup_timer.data != keycode || new_toggle != old_toggle) {
 			delay_timer_finished = 0;
-			input_event(input_dev, EV_KEY, keyup_timer.data, !!0);
-			input_event(input_dev, EV_KEY, keycode, !0);
-		} else
-			if (delay_timer_finished)
-				input_event(input_dev, EV_KEY, keycode, 2);
+			input_event(input_dev, EV_KEY, keyup_timer.data, 0);
+			input_event(input_dev, EV_KEY, keycode, 1);
+			input_sync(input_dev);
+		} else if (delay_timer_finished) {
+			input_event(input_dev, EV_KEY, keycode, 2);
+			input_sync(input_dev);
+		}
 	} else {
 		delay_timer_finished = 0;
-		input_event(input_dev, EV_KEY, keycode, !0);
+		input_event(input_dev, EV_KEY, keycode, 1);
+		input_sync(input_dev);
 	}
 
 	keyup_timer.expires = jiffies + UP_TIMEOUT;
@@ -211,6 +215,7 @@ static void ir_handler(struct av7110 *av7110, u32 ircom)
 int __devinit av7110_ir_init(struct av7110 *av7110)
 {
 	static struct proc_dir_entry *e;
+	int err;
 
 	if (av_cnt >= sizeof av_list/sizeof av_list[0])
 		return -ENOSPC;
@@ -231,7 +236,11 @@ int __devinit av7110_ir_init(struct av7110 *av7110)
 		set_bit(EV_KEY, input_dev->evbit);
 		set_bit(EV_REP, input_dev->evbit);
 		input_register_keys();
-		input_register_device(input_dev);
+		err = input_register_device(input_dev);
+		if (err) {
+			input_free_device(input_dev);
+			return err;
+		}
 		input_dev->timer.function = input_repeat_key;
 
 		e = create_proc_entry("av7110_ir", S_IFREG | S_IRUGO | S_IWUSR, NULL);
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 2235ff8b8a1..89ab4b59155 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -360,7 +360,7 @@ static int ciintf_init(struct budget_av *budget_av)
 	saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTLO);
 
 	/* Enable DEBI pins */
-	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+	saa7146_write(saa, MC1, MASK_27 | MASK_11);
 
 	/* register CI interface */
 	budget_av->ca.owner = THIS_MODULE;
@@ -386,7 +386,7 @@ static int ciintf_init(struct budget_av *budget_av)
 	return 0;
 
 error:
-	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+	saa7146_write(saa, MC1, MASK_27);
 	return result;
 }
 
@@ -403,7 +403,7 @@ static void ciintf_deinit(struct budget_av *budget_av)
 	dvb_ca_en50221_release(&budget_av->ca);
 
 	/* disable DEBI pins */
-	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+	saa7146_write(saa, MC1, MASK_27);
 }
 
 
@@ -655,6 +655,10 @@ static struct tda10021_config philips_cu1216_config = {
 	.demod_address = 0x0c,
 };
 
+static struct tda10021_config philips_cu1216_config_altaddress = {
+	.demod_address = 0x0d,
+};
+
 
 
 
@@ -831,7 +835,7 @@ static int philips_sd1878_tda8261_tuner_set_params(struct dvb_frontend *fe,
 		return -EINVAL;
 
 	rc=dvb_pll_configure(&dvb_pll_philips_sd1878_tda8261, buf,
-			params->frequency, 0);
+			     params->frequency, 0);
 	if(rc < 0) return rc;
 
 	if (fe->ops.i2c_gate_ctrl)
@@ -914,6 +918,7 @@ static u8 read_pwm(struct budget_av *budget_av)
 #define SUBID_DVBS_TV_STAR_CI	0x0016
 #define SUBID_DVBS_EASYWATCH_1  0x001a
 #define SUBID_DVBS_EASYWATCH	0x001e
+#define SUBID_DVBC_EASYWATCH	0x002a
 #define SUBID_DVBC_KNC1		0x0020
 #define SUBID_DVBC_KNC1_PLUS	0x0021
 #define SUBID_DVBC_CINERGY1200	0x1156
@@ -947,11 +952,15 @@ static void frontend_init(struct budget_av *budget_av)
 	/* Enable / PowerON Frontend */
 	saa7146_setgpio(saa, 0, SAA7146_GPIO_OUTLO);
 
+	/* Wait for PowerON */
+	msleep(100);
+
 	/* additional setup necessary for the PLUS cards */
 	switch (saa->pci->subsystem_device) {
 		case SUBID_DVBS_KNC1_PLUS:
 		case SUBID_DVBC_KNC1_PLUS:
 		case SUBID_DVBT_KNC1_PLUS:
+		case SUBID_DVBC_EASYWATCH:
 			saa7146_setgpio(saa, 3, SAA7146_GPIO_OUTHI);
 			break;
 	}
@@ -1006,10 +1015,15 @@ static void frontend_init(struct budget_av *budget_av)
 	case SUBID_DVBC_KNC1:
 	case SUBID_DVBC_KNC1_PLUS:
 	case SUBID_DVBC_CINERGY1200:
+	case SUBID_DVBC_EASYWATCH:
 		budget_av->reinitialise_demod = 1;
 		fe = dvb_attach(tda10021_attach, &philips_cu1216_config,
 				     &budget_av->budget.i2c_adap,
 				     read_pwm(budget_av));
+		if (fe == NULL)
+			fe = dvb_attach(tda10021_attach, &philips_cu1216_config_altaddress,
+					     &budget_av->budget.i2c_adap,
+					     read_pwm(budget_av));
 		if (fe) {
 			budget_av->tda10021_poclkp = 1;
 			budget_av->tda10021_set_frontend = fe->ops.set_frontend;
@@ -1242,6 +1256,7 @@ MAKE_BUDGET_INFO(knc1t, "KNC1 DVB-T", BUDGET_KNC1T);
 MAKE_BUDGET_INFO(kncxs, "KNC TV STAR DVB-S", BUDGET_TVSTAR);
 MAKE_BUDGET_INFO(satewpls, "Satelco EasyWatch DVB-S light", BUDGET_TVSTAR);
 MAKE_BUDGET_INFO(satewpls1, "Satelco EasyWatch DVB-S light", BUDGET_KNC1S);
+MAKE_BUDGET_INFO(satewplc, "Satelco EasyWatch DVB-C", BUDGET_KNC1CP);
 MAKE_BUDGET_INFO(knc1sp, "KNC1 DVB-S Plus", BUDGET_KNC1SP);
 MAKE_BUDGET_INFO(knc1cp, "KNC1 DVB-C Plus", BUDGET_KNC1CP);
 MAKE_BUDGET_INFO(knc1tp, "KNC1 DVB-T Plus", BUDGET_KNC1TP);
@@ -1260,6 +1275,7 @@ static struct pci_device_id pci_tbl[] = {
 	MAKE_EXTENSION_PCI(kncxs, 0x1894, 0x0016),
 	MAKE_EXTENSION_PCI(satewpls, 0x1894, 0x001e),
 	MAKE_EXTENSION_PCI(satewpls1, 0x1894, 0x001a),
+	MAKE_EXTENSION_PCI(satewplc, 0x1894, 0x002a),
 	MAKE_EXTENSION_PCI(knc1c, 0x1894, 0x0020),
 	MAKE_EXTENSION_PCI(knc1cp, 0x1894, 0x0021),
 	MAKE_EXTENSION_PCI(knc1t, 0x1894, 0x0030),
@@ -1277,7 +1293,7 @@ MODULE_DEVICE_TABLE(pci, pci_tbl);
 
 static struct saa7146_extension budget_extension = {
 	.name = "budget_av",
-	.flags = SAA7146_I2C_SHORT_DELAY,
+	.flags = SAA7146_USE_I2C_IRQ,
 
 	.pci_tbl = pci_tbl,
 
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index 2a2e9b40061..f2066b47bae 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -37,6 +37,7 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/spinlock.h>
+#include <media/ir-common.h>
 
 #include "dvb_ca_en50221.h"
 #include "stv0299.h"
@@ -46,7 +47,14 @@
 #include "bsbe1.h"
 #include "bsru6.h"
 
-#define DEBIADDR_IR		0x1234
+/*
+ * Regarding DEBIADDR_IR:
+ * Some CI modules hang if random addresses are read.
+ * Using address 0x4000 for the IR read means that we
+ * use the same address as for CI version, which should
+ * be a safe default.
+ */
+#define DEBIADDR_IR		0x4000
 #define DEBIADDR_CICONTROL	0x0000
 #define DEBIADDR_CIVERSION	0x4000
 #define DEBIADDR_IO		0x1000
@@ -65,162 +73,218 @@
 #define SLOTSTATUS_READY	8
 #define SLOTSTATUS_OCCUPIED	(SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY)
 
+/* Milliseconds during which key presses are regarded as key repeat and during
+ * which the debounce logic is active
+ */
+#define IR_REPEAT_TIMEOUT	350
+
+/* RC5 device wildcard */
+#define IR_DEVICE_ANY		255
+
+/* Some remotes sends multiple sequences per keypress (e.g. Zenith sends two),
+ * this setting allows the superflous sequences to be ignored
+ */
+static int debounce = 0;
+module_param(debounce, int, 0644);
+MODULE_PARM_DESC(debounce, "ignore repeated IR sequences (default: 0 = ignore no sequences)");
+
+static int rc5_device = -1;
+module_param(rc5_device, int, 0644);
+MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)");
+
+static int ir_debug = 0;
+module_param(ir_debug, int, 0644);
+MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
+
+struct budget_ci_ir {
+	struct input_dev *dev;
+	struct tasklet_struct msp430_irq_tasklet;
+	char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
+	char phys[32];
+	struct ir_input_state state;
+	int rc5_device;
+};
+
 struct budget_ci {
 	struct budget budget;
-	struct input_dev *input_dev;
-	struct tasklet_struct msp430_irq_tasklet;
 	struct tasklet_struct ciintf_irq_tasklet;
 	int slot_status;
 	int ci_irq;
 	struct dvb_ca_en50221 ca;
-	char ir_dev_name[50];
+	struct budget_ci_ir ir;
 	u8 tuner_pll_address; /* used for philips_tdm1316l configs */
 };
 
-/* from reading the following remotes:
-   Zenith Universal 7 / TV Mode 807 / VCR Mode 837
-   Hauppauge (from NOVA-CI-s box product)
-   i've taken a "middle of the road" approach and note the differences
-*/
-static u16 key_map[64] = {
-	/* 0x0X */
-	KEY_0, KEY_1, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, KEY_7, KEY_8,
-	KEY_9,
-	KEY_ENTER,
-	KEY_RED,
-	KEY_POWER,		/* RADIO on Hauppauge */
-	KEY_MUTE,
-	0,
-	KEY_A,			/* TV on Hauppauge */
-	/* 0x1X */
-	KEY_VOLUMEUP, KEY_VOLUMEDOWN,
-	0, 0,
-	KEY_B,
-	0, 0, 0, 0, 0, 0, 0,
-	KEY_UP, KEY_DOWN,
-	KEY_OPTION,		/* RESERVED on Hauppauge */
-	KEY_BREAK,
-	/* 0x2X */
-	KEY_CHANNELUP, KEY_CHANNELDOWN,
-	KEY_PREVIOUS,		/* Prev. Ch on Zenith, SOURCE on Hauppauge */
-	0, KEY_RESTART, KEY_OK,
-	KEY_CYCLEWINDOWS,	/* MINIMIZE on Hauppauge */
-	0,
-	KEY_ENTER,		/* VCR mode on Zenith */
-	KEY_PAUSE,
-	0,
-	KEY_RIGHT, KEY_LEFT,
-	0,
-	KEY_MENU,		/* FULL SCREEN on Hauppauge */
-	0,
-	/* 0x3X */
-	KEY_SLOW,
-	KEY_PREVIOUS,		/* VCR mode on Zenith */
-	KEY_REWIND,
-	0,
-	KEY_FASTFORWARD,
-	KEY_PLAY, KEY_STOP,
-	KEY_RECORD,
-	KEY_TUNER,		/* TV/VCR on Zenith */
-	0,
-	KEY_C,
-	0,
-	KEY_EXIT,
-	KEY_POWER2,
-	KEY_TUNER,		/* VCR mode on Zenith */
-	0,
-};
-
-static void msp430_ir_debounce(unsigned long data)
+static void msp430_ir_keyup(unsigned long data)
 {
-	struct input_dev *dev = (struct input_dev *) data;
-
-	if (dev->rep[0] == 0 || dev->rep[0] == ~0) {
-		input_event(dev, EV_KEY, key_map[dev->repeat_key], !!0);
-		return;
-	}
-
-	dev->rep[0] = 0;
-	dev->timer.expires = jiffies + HZ * 350 / 1000;
-	add_timer(&dev->timer);
-	input_event(dev, EV_KEY, key_map[dev->repeat_key], 2);	/* REPEAT */
+	struct budget_ci_ir *ir = (struct budget_ci_ir *) data;
+	ir_input_nokey(ir->dev, &ir->state);
 }
 
 static void msp430_ir_interrupt(unsigned long data)
 {
 	struct budget_ci *budget_ci = (struct budget_ci *) data;
-	struct input_dev *dev = budget_ci->input_dev;
-	unsigned int code =
-		ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
+	struct input_dev *dev = budget_ci->ir.dev;
+	static int bounces = 0;
+	int device;
+	int toggle;
+	static int prev_toggle = -1;
+	static u32 ir_key;
+	u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
+
+	/*
+	 * The msp430 chip can generate two different bytes, command and device
+	 *
+	 * type1: X1CCCCCC, C = command bits (0 - 63)
+	 * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit
+	 *
+	 * More than one command byte may be generated before the device byte
+	 * Only when we have both, a correct keypress is generated
+	 */
+
+	/* Is this a RC5 command byte? */
+	if (command & 0x40) {
+		if (ir_debug)
+			printk("budget_ci: received command byte 0x%02x\n", command);
+		ir_key = command & 0x3f;
+		return;
+	}
 
-	if (code & 0x40) {
-		code &= 0x3f;
+	/* It's a RC5 device byte */
+	if (ir_debug)
+		printk("budget_ci: received device byte 0x%02x\n", command);
+	device = command & 0x1f;
+	toggle = command & 0x20;
 
-		if (timer_pending(&dev->timer)) {
-			if (code == dev->repeat_key) {
-				++dev->rep[0];
-				return;
-			}
-			del_timer(&dev->timer);
-			input_event(dev, EV_KEY, key_map[dev->repeat_key], !!0);
-		}
+	if (budget_ci->ir.rc5_device != IR_DEVICE_ANY && budget_ci->ir.rc5_device != device)
+		return;
 
-		if (!key_map[code]) {
-			printk("DVB (%s): no key for %02x!\n", __FUNCTION__, code);
-			return;
-		}
+	/* Ignore repeated key sequences if requested */
+	if (toggle == prev_toggle && ir_key == dev->repeat_key &&
+	    bounces > 0 && timer_pending(&dev->timer)) {
+		if (ir_debug)
+			printk("budget_ci: debounce logic ignored IR command\n");
+		bounces--;
+		return;
+	}
+	prev_toggle = toggle;
+
+	/* Are we still waiting for a keyup event? */
+	if (del_timer(&dev->timer))
+		ir_input_nokey(dev, &budget_ci->ir.state);
+
+	/* Generate keypress */
+	if (ir_debug)
+		printk("budget_ci: generating keypress 0x%02x\n", ir_key);
+	ir_input_keydown(dev, &budget_ci->ir.state, ir_key, (ir_key & (command << 8)));
 
-		/* initialize debounce and repeat */
-		dev->repeat_key = code;
-		/* Zenith remote _always_ sends 2 sequences */
-		dev->rep[0] = ~0;
-		/* 350 milliseconds */
-		dev->timer.expires = jiffies + HZ * 350 / 1000;
-		/* MAKE */
-		input_event(dev, EV_KEY, key_map[code], !0);
-		add_timer(&dev->timer);
+	/* Do we want to delay the keyup event? */
+	if (debounce) {
+		bounces = debounce;
+		mod_timer(&dev->timer, jiffies + msecs_to_jiffies(IR_REPEAT_TIMEOUT));
+	} else {
+		ir_input_nokey(dev, &budget_ci->ir.state);
 	}
 }
 
 static int msp430_ir_init(struct budget_ci *budget_ci)
 {
 	struct saa7146_dev *saa = budget_ci->budget.dev;
-	struct input_dev *input_dev;
-	int i;
+	struct input_dev *input_dev = budget_ci->ir.dev;
+	int error;
+
+	budget_ci->ir.dev = input_dev = input_allocate_device();
+	if (!input_dev) {
+		printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
+		error = -ENOMEM;
+		goto out1;
+	}
 
-	budget_ci->input_dev = input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
+	snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name),
+		 "Budget-CI dvb ir receiver %s", saa->name);
+	snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys),
+		 "pci-%s/ir0", pci_name(saa->pci));
 
-	sprintf(budget_ci->ir_dev_name, "Budget-CI dvb ir receiver %s", saa->name);
+	input_dev->name = budget_ci->ir.name;
 
-	input_dev->name = budget_ci->ir_dev_name;
+	input_dev->phys = budget_ci->ir.phys;
+	input_dev->id.bustype = BUS_PCI;
+	input_dev->id.version = 1;
+	if (saa->pci->subsystem_vendor) {
+		input_dev->id.vendor = saa->pci->subsystem_vendor;
+		input_dev->id.product = saa->pci->subsystem_device;
+	} else {
+		input_dev->id.vendor = saa->pci->vendor;
+		input_dev->id.product = saa->pci->device;
+	}
+	input_dev->cdev.dev = &saa->pci->dev;
 
-	set_bit(EV_KEY, input_dev->evbit);
-	for (i = 0; i < ARRAY_SIZE(key_map); i++)
-		if (key_map[i])
-			set_bit(key_map[i], input_dev->keybit);
+	/* Select keymap and address */
+	switch (budget_ci->budget.dev->pci->subsystem_device) {
+	case 0x100c:
+	case 0x100f:
+	case 0x1010:
+	case 0x1011:
+	case 0x1012:
+	case 0x1017:
+		/* The hauppauge keymap is a superset of these remotes */
+		ir_input_init(input_dev, &budget_ci->ir.state,
+			      IR_TYPE_RC5, ir_codes_hauppauge_new);
+
+		if (rc5_device < 0)
+			budget_ci->ir.rc5_device = 0x1f;
+		else
+			budget_ci->ir.rc5_device = rc5_device;
+		break;
+	default:
+		/* unknown remote */
+		ir_input_init(input_dev, &budget_ci->ir.state,
+			      IR_TYPE_RC5, ir_codes_budget_ci_old);
+
+		if (rc5_device < 0)
+			budget_ci->ir.rc5_device = IR_DEVICE_ANY;
+		else
+			budget_ci->ir.rc5_device = rc5_device;
+		break;
+	}
+
+	/* initialise the key-up debounce timeout handler */
+	input_dev->timer.function = msp430_ir_keyup;
+	input_dev->timer.data = (unsigned long) &budget_ci->ir;
 
-	input_register_device(budget_ci->input_dev);
+	error = input_register_device(input_dev);
+	if (error) {
+		printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
+		goto out2;
+	}
 
-	input_dev->timer.function = msp430_ir_debounce;
+	tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt,
+		     (unsigned long) budget_ci);
 
-	saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_06);
+	SAA7146_IER_ENABLE(saa, MASK_06);
 	saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI);
 
 	return 0;
+
+out2:
+	input_free_device(input_dev);
+out1:
+	return error;
 }
 
 static void msp430_ir_deinit(struct budget_ci *budget_ci)
 {
 	struct saa7146_dev *saa = budget_ci->budget.dev;
-	struct input_dev *dev = budget_ci->input_dev;
+	struct input_dev *dev = budget_ci->ir.dev;
 
-	saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_06);
+	SAA7146_IER_DISABLE(saa, MASK_06);
 	saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
+	tasklet_kill(&budget_ci->ir.msp430_irq_tasklet);
 
-	if (del_timer(&dev->timer))
-		input_event(dev, EV_KEY, key_map[dev->repeat_key], !!0);
+	if (del_timer(&dev->timer)) {
+		ir_input_nokey(dev, &budget_ci->ir.state);
+		input_sync(dev);
+	}
 
 	input_unregister_device(dev);
 }
@@ -421,7 +485,7 @@ static int ciintf_init(struct budget_ci *budget_ci)
 	memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221));
 
 	// enable DEBI pins
-	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16) | 0x800);
+	saa7146_write(saa, MC1, MASK_27 | MASK_11);
 
 	// test if it is there
 	ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0);
@@ -473,7 +537,7 @@ static int ciintf_init(struct budget_ci *budget_ci)
 		} else {
 			saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI);
 		}
-		saa7146_write(saa, IER, saa7146_read(saa, IER) | MASK_03);
+		SAA7146_IER_ENABLE(saa, MASK_03);
 	}
 
 	// enable interface
@@ -495,7 +559,7 @@ static int ciintf_init(struct budget_ci *budget_ci)
 	return 0;
 
 error:
-	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+	saa7146_write(saa, MC1, MASK_27);
 	return result;
 }
 
@@ -505,7 +569,7 @@ static void ciintf_deinit(struct budget_ci *budget_ci)
 
 	// disable CI interrupts
 	if (budget_ci->ci_irq) {
-		saa7146_write(saa, IER, saa7146_read(saa, IER) & ~MASK_03);
+		SAA7146_IER_DISABLE(saa, MASK_03);
 		saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT);
 		tasklet_kill(&budget_ci->ciintf_irq_tasklet);
 	}
@@ -523,7 +587,7 @@ static void ciintf_deinit(struct budget_ci *budget_ci)
 	dvb_ca_en50221_release(&budget_ci->ca);
 
 	// disable DEBI pins
-	saa7146_write(saa, MC1, saa7146_read(saa, MC1) | (0x800 << 16));
+	saa7146_write(saa, MC1, MASK_27);
 }
 
 static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
@@ -533,7 +597,7 @@ static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr)
 	dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci);
 
 	if (*isr & MASK_06)
-		tasklet_schedule(&budget_ci->msp430_irq_tasklet);
+		tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet);
 
 	if (*isr & MASK_10)
 		ttpci_budget_irq10_handler(dev, isr);
@@ -828,7 +892,7 @@ static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe, struc
 		band = 1;
 	} else if (tuner_frequency < 200000000) {
 		cp = 6;
-		band = 1;
+		band = 2;
 	} else if (tuner_frequency < 290000000) {
 		cp = 3;
 		band = 2;
@@ -1028,6 +1092,7 @@ static void frontend_init(struct budget_ci *budget_ci)
 
 	case 0x1012:		// TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt))
 		budget_ci->tuner_pll_address = 0x60;
+		philips_tdm1316l_config.invert = 1;
 		budget_ci->budget.dvb_frontend =
 			dvb_attach(tda10046_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
 		if (budget_ci->budget.dvb_frontend) {
@@ -1075,24 +1140,23 @@ static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 	struct budget_ci *budget_ci;
 	int err;
 
-	if (!(budget_ci = kmalloc(sizeof(struct budget_ci), GFP_KERNEL)))
-		return -ENOMEM;
+	budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL);
+	if (!budget_ci) {
+		err = -ENOMEM;
+		goto out1;
+	}
 
 	dprintk(2, "budget_ci: %p\n", budget_ci);
 
-	budget_ci->budget.ci_present = 0;
-
 	dev->ext_priv = budget_ci;
 
-	if ((err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE))) {
-		kfree(budget_ci);
-		return err;
-	}
-
-	tasklet_init(&budget_ci->msp430_irq_tasklet, msp430_ir_interrupt,
-		     (unsigned long) budget_ci);
+	err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE);
+	if (err)
+		goto out2;
 
-	msp430_ir_init(budget_ci);
+	err = msp430_ir_init(budget_ci);
+	if (err)
+		goto out3;
 
 	ciintf_init(budget_ci);
 
@@ -1102,6 +1166,13 @@ static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extensio
 	ttpci_budget_init_hooks(&budget_ci->budget);
 
 	return 0;
+
+out3:
+	ttpci_budget_deinit(&budget_ci->budget);
+out2:
+	kfree(budget_ci);
+out1:
+	return err;
 }
 
 static int budget_ci_detach(struct saa7146_dev *dev)
@@ -1112,16 +1183,13 @@ static int budget_ci_detach(struct saa7146_dev *dev)
 
 	if (budget_ci->budget.ci_present)
 		ciintf_deinit(budget_ci);
+	msp430_ir_deinit(budget_ci);
 	if (budget_ci->budget.dvb_frontend) {
 		dvb_unregister_frontend(budget_ci->budget.dvb_frontend);
 		dvb_frontend_detach(budget_ci->budget.dvb_frontend);
 	}
 	err = ttpci_budget_deinit(&budget_ci->budget);
 
-	tasklet_kill(&budget_ci->msp430_irq_tasklet);
-
-	msp430_ir_deinit(budget_ci);
-
 	// disable frontend and CI interface
 	saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT);
 
@@ -1154,7 +1222,7 @@ MODULE_DEVICE_TABLE(pci, pci_tbl);
 
 static struct saa7146_extension budget_extension = {
 	.name = "budget_ci dvb",
-	.flags = SAA7146_I2C_SHORT_DELAY,
+	.flags = SAA7146_USE_I2C_IRQ,
 
 	.module = THIS_MODULE,
 	.pci_tbl = &pci_tbl[0],
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index fc1267b8c89..9a155396d6a 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -500,14 +500,14 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 
 /*      New design (By Emard)
 **      this rps1 code will copy internal HS event to GPIO3 pin.
-**      GPIO3 is in budget-patch hardware connectd to port B VSYNC
+**      GPIO3 is in budget-patch hardware connected to port B VSYNC
 
 **      HS is an internal event of 7146, accessible with RPS
 **      and temporarily raised high every n lines
 **      (n in defined in the RPS_THRESH1 counter threshold)
 **      I think HS is raised high on the beginning of the n-th line
 **      and remains high until this n-th line that triggered
-**      it is completely received. When the receiption of n-th line
+**      it is completely received. When the reception of n-th line
 **      ends, HS is lowered.
 
 **      To transmit data over DMA, 7146 needs changing state at
@@ -541,7 +541,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 **      hardware debug note: a working budget card (including budget patch)
 **      with vpeirq() interrupt setup in mode "0x90" (every 64K) will
 **      generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
-**      and that means 3*25=75 Hz of interrupt freqency, as seen by
+**      and that means 3*25=75 Hz of interrupt frequency, as seen by
 **      watch cat /proc/interrupts
 **
 **      If this frequency is 3x lower (and data received in the DMA
@@ -550,7 +550,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 **      this means VSYNC line is not connected in the hardware.
 **      (check soldering pcb and pins)
 **      The same behaviour of missing VSYNC can be duplicated on budget
-**      cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
+**      cards, by setting DD1_INIT trigger mode 7 in 3rd nibble.
 */
 
 	// Setup RPS1 "program" (p35)
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index e58f0391e9d..9268a82bada 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -46,6 +46,10 @@
 #include "lnbp21.h"
 #include "bsru6.h"
 
+static int diseqc_method;
+module_param(diseqc_method, int, 0444);
+MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)");
+
 static void Set22K (struct budget *budget, int state)
 {
 	struct saa7146_dev *dev=budget->dev;
@@ -382,6 +386,11 @@ static void frontend_init(struct budget *budget)
 		if (budget->dvb_frontend) {
 			budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
 			budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+			if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) {
+				budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+				budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
+				budget->dvb_frontend->ops.set_tone = budget_set_tone;
+			}
 			break;
 		}
 		break;
@@ -546,7 +555,7 @@ MODULE_DEVICE_TABLE(pci, pci_tbl);
 
 static struct saa7146_extension budget_extension = {
 	.name		= "budget dvb",
-	.flags		= SAA7146_I2C_SHORT_DELAY,
+	.flags		= SAA7146_USE_I2C_IRQ,
 
 	.module		= THIS_MODULE,
 	.pci_tbl	= pci_tbl,
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index a1c9fa9919e..bd6e7baae2e 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -238,6 +238,7 @@ static void ttusb_dec_handle_irq( struct urb *urb)
 		 * for now lets report each signal as a key down and up*/
 		dprintk("%s:rc signal:%d\n", __FUNCTION__, buffer[4]);
 		input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 1);
+		input_sync(dec->rc_input_dev);
 		input_report_key(dec->rc_input_dev, rc_keys[buffer[4] - 1], 0);
 		input_sync(dec->rc_input_dev);
 	}
@@ -1135,8 +1136,7 @@ static void ttusb_dec_free_iso_urbs(struct ttusb_dec *dec)
 	dprintk("%s\n", __FUNCTION__);
 
 	for (i = 0; i < ISO_BUF_COUNT; i++)
-		if (dec->iso_urb[i])
-			usb_free_urb(dec->iso_urb[i]);
+		usb_free_urb(dec->iso_urb[i]);
 
 	pci_free_consistent(NULL,
 			    ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF *
@@ -1188,11 +1188,12 @@ static int ttusb_init_rc( struct ttusb_dec *dec)
 	struct input_dev *input_dev;
 	u8 b[] = { 0x00, 0x01 };
 	int i;
+	int err;
 
 	usb_make_path(dec->udev, dec->rc_phys, sizeof(dec->rc_phys));
 	strlcpy(dec->rc_phys, "/input0", sizeof(dec->rc_phys));
 
-	dec->rc_input_dev = input_dev = input_allocate_device();
+	input_dev = input_allocate_device();
 	if (!input_dev)
 		return -ENOMEM;
 
@@ -1206,8 +1207,13 @@ static int ttusb_init_rc( struct ttusb_dec *dec)
 	for (i = 0; i < ARRAY_SIZE(rc_keys); i++)
 		  set_bit(rc_keys[i], input_dev->keybit);
 
-	input_register_device(input_dev);
+	err = input_register_device(input_dev);
+	if (err) {
+		input_free_device(input_dev);
+		return err;
+	}
 
+	dec->rc_input_dev = input_dev;
 	if (usb_submit_urb(dec->irq_urb, GFP_KERNEL))
 		printk("%s: usb_submit_urb failed\n",__FUNCTION__);
 	/* enable irq pipe */
@@ -1245,7 +1251,7 @@ static int ttusb_dec_init_usb(struct ttusb_dec *dec)
 			return -ENOMEM;
 		}
 		dec->irq_buffer = usb_buffer_alloc(dec->udev,IRQ_PACKET_SIZE,
-					SLAB_ATOMIC, &dec->irq_dma_handle);
+					GFP_ATOMIC, &dec->irq_dma_handle);
 		if(!dec->irq_buffer) {
 			return -ENOMEM;
 		}