Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>

6 files changed, 21 insertions, 11 deletions

diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index dd0bcbe140b..8458ff3f351 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -275,8 +275,7 @@ static void cinergyt2_free_stream_urbs (struct cinergyt2 *cinergyt2)
 	int i;
 
 	for (i=0; i<STREAM_URB_COUNT; i++)
-		if (cinergyt2->stream_urb[i])
-			usb_free_urb(cinergyt2->stream_urb[i]);
+		usb_free_urb(cinergyt2->stream_urb[i]);
 
 	usb_buffer_free(cinergyt2->udev, STREAM_URB_COUNT*STREAM_BUF_SIZE,
 			    cinergyt2->streambuf, cinergyt2->streambuf_dmahandle);
@@ -320,8 +319,7 @@ static void cinergyt2_stop_stream_xfer (struct cinergyt2 *cinergyt2)
 	cinergyt2_control_stream_transfer(cinergyt2, 0);
 
 	for (i=0; i<STREAM_URB_COUNT; i++)
-		if (cinergyt2->stream_urb[i])
-			usb_kill_urb(cinergyt2->stream_urb[i]);
+		usb_kill_urb(cinergyt2->stream_urb[i]);
 }
 
 static int cinergyt2_start_stream_xfer (struct cinergyt2 *cinergyt2)
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 53304e6991a..a2ab2eebfc6 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -348,7 +348,7 @@ static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wra
 
 static void dvb_frontend_swzigzag(struct dvb_frontend *fe)
 {
-	fe_status_t s;
+	fe_status_t s = 0;
 	struct dvb_frontend_private *fepriv = fe->frontend_priv;
 
 	/* if we've got no parameters, just keep idling */
diff --git a/drivers/media/dvb/frontends/tda10086.c b/drivers/media/dvb/frontends/tda10086.c
index 7456b0b9976..4c27a2d90a3 100644
--- a/drivers/media/dvb/frontends/tda10086.c
+++ b/drivers/media/dvb/frontends/tda10086.c
@@ -441,6 +441,10 @@ static int tda10086_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_pa
 
 	dprintk ("%s\n", __FUNCTION__);
 
+	// check for invalid symbol rate
+	if (fe_params->u.qpsk.symbol_rate < 500000)
+		return -EINVAL;
+
 	// calculate the updated frequency (note: we convert from Hz->kHz)
 	tmp64 = tda10086_read_byte(state, 0x52);
 	tmp64 |= (tda10086_read_byte(state, 0x51) << 8);
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index fc1267b8c89..9a155396d6a 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -500,14 +500,14 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 
 /*      New design (By Emard)
 **      this rps1 code will copy internal HS event to GPIO3 pin.
-**      GPIO3 is in budget-patch hardware connectd to port B VSYNC
+**      GPIO3 is in budget-patch hardware connected to port B VSYNC
 
 **      HS is an internal event of 7146, accessible with RPS
 **      and temporarily raised high every n lines
 **      (n in defined in the RPS_THRESH1 counter threshold)
 **      I think HS is raised high on the beginning of the n-th line
 **      and remains high until this n-th line that triggered
-**      it is completely received. When the receiption of n-th line
+**      it is completely received. When the reception of n-th line
 **      ends, HS is lowered.
 
 **      To transmit data over DMA, 7146 needs changing state at
@@ -541,7 +541,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 **      hardware debug note: a working budget card (including budget patch)
 **      with vpeirq() interrupt setup in mode "0x90" (every 64K) will
 **      generate 3 interrupts per 25-Hz DMA frame of 2*188*512 bytes
-**      and that means 3*25=75 Hz of interrupt freqency, as seen by
+**      and that means 3*25=75 Hz of interrupt frequency, as seen by
 **      watch cat /proc/interrupts
 **
 **      If this frequency is 3x lower (and data received in the DMA
@@ -550,7 +550,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 **      this means VSYNC line is not connected in the hardware.
 **      (check soldering pcb and pins)
 **      The same behaviour of missing VSYNC can be duplicated on budget
-**      cards, by seting DD1_INIT trigger mode 7 in 3rd nibble.
+**      cards, by setting DD1_INIT trigger mode 7 in 3rd nibble.
 */
 
 	// Setup RPS1 "program" (p35)
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index e58f0391e9d..56f1c80defc 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -46,6 +46,10 @@
 #include "lnbp21.h"
 #include "bsru6.h"
 
+static int diseqc_method;
+module_param(diseqc_method, int, 0444);
+MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)");
+
 static void Set22K (struct budget *budget, int state)
 {
 	struct saa7146_dev *dev=budget->dev;
@@ -382,6 +386,11 @@ static void frontend_init(struct budget *budget)
 		if (budget->dvb_frontend) {
 			budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
 			budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+			if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) {
+				budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
+				budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
+				budget->dvb_frontend->ops.set_tone = budget_set_tone;
+			}
 			break;
 		}
 		break;
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index a1c9fa9919e..8135f3e76ae 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -1135,8 +1135,7 @@ static void ttusb_dec_free_iso_urbs(struct ttusb_dec *dec)
 	dprintk("%s\n", __FUNCTION__);
 
 	for (i = 0; i < ISO_BUF_COUNT; i++)
-		if (dec->iso_urb[i])
-			usb_free_urb(dec->iso_urb[i]);
+		usb_free_urb(dec->iso_urb[i]);
 
 	pci_free_consistent(NULL,
 			    ISO_FRAME_SIZE * (FRAMES_PER_ISO_BUF *