diff options
| author | Ingo Molnar <mingo@elte.hu> | 2009-10-25 17:30:53 +0100 |
|---|---|---|
| committer | Ingo Molnar <mingo@elte.hu> | 2009-10-25 17:30:53 +0100 |
| commit | 0b9e31e9264f1bad89856afb96da1688292f13b4 (patch) | |
| tree | 7a9e9b6456dce993efeed8734de0a15a1f16ae94 /drivers/media/dvb | |
| parent | cf82ff7ea7695b0e82ba07bc5e9f1bd03a74e1aa (diff) | |
| parent | 964fe080d94db82a3268443e9b9ece4c60246414 (diff) | |
Merge branch 'linus' into sched/core
Conflicts:
fs/proc/array.c
Merge reason: resolve conflict and queue up dependent patch.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'drivers/media/dvb')
42 files changed, 7165 insertions, 445 deletions
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 1d0e4b1ef10..35d0817126e 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -68,6 +68,10 @@ comment "Supported FireWire (IEEE 1394) Adapters" depends on DVB_CORE && IEEE1394 source "drivers/media/dvb/firewire/Kconfig" +comment "Supported Earthsoft PT1 Adapters" + depends on DVB_CORE && PCI && I2C +source "drivers/media/dvb/pt1/Kconfig" + comment "Supported DVB Frontends" depends on DVB_CORE source "drivers/media/dvb/frontends/Kconfig" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index 6092a5bb5a7..16d262ddb45 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -2,6 +2,6 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ +obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/ pt1/ obj-$(CONFIG_DVB_FIREDTV) += firewire/ diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index 3750ff48cba..c37790ad92d 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -20,6 +20,7 @@ * */ +#include <linux/sched.h> #include <linux/spinlock.h> #include <linux/slab.h> #include <linux/vmalloc.h> @@ -1203,7 +1204,7 @@ static unsigned int dvb_dvr_poll(struct file *file, poll_table *wait) return mask; } -static struct file_operations dvb_dvr_fops = { +static const struct file_operations dvb_dvr_fops = { .owner = THIS_MODULE, .read = dvb_dvr_read, .write = dvb_dvr_write, diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c index eef6d361662..91c537bca8a 100644 --- a/drivers/media/dvb/dvb-core/dvb_demux.c +++ b/drivers/media/dvb/dvb-core/dvb_demux.c @@ -21,6 +21,7 @@ * */ +#include <linux/sched.h> #include <linux/spinlock.h> #include <linux/slab.h> #include <linux/vmalloc.h> diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index d13ebcb0c6b..ddf639ed2fd 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -850,6 +850,49 @@ static int dvb_frontend_check_parameters(struct dvb_frontend *fe, return 0; } +static int dvb_frontend_clear_cache(struct dvb_frontend *fe) +{ + int i; + + memset(&(fe->dtv_property_cache), 0, + sizeof(struct dtv_frontend_properties)); + + fe->dtv_property_cache.state = DTV_CLEAR; + fe->dtv_property_cache.delivery_system = SYS_UNDEFINED; + fe->dtv_property_cache.inversion = INVERSION_AUTO; + fe->dtv_property_cache.fec_inner = FEC_AUTO; + fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_AUTO; + fe->dtv_property_cache.bandwidth_hz = BANDWIDTH_AUTO; + fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_AUTO; + fe->dtv_property_cache.hierarchy = HIERARCHY_AUTO; + fe->dtv_property_cache.symbol_rate = QAM_AUTO; + fe->dtv_property_cache.code_rate_HP = FEC_AUTO; + fe->dtv_property_cache.code_rate_LP = FEC_AUTO; + + fe->dtv_property_cache.isdbt_partial_reception = -1; + fe->dtv_property_cache.isdbt_sb_mode = -1; + fe->dtv_property_cache.isdbt_sb_subchannel = -1; + fe->dtv_property_cache.isdbt_sb_segment_idx = -1; + fe->dtv_property_cache.isdbt_sb_segment_count = -1; + fe->dtv_property_cache.isdbt_layer_enabled = 0x7; + for (i = 0; i < 3; i++) { + fe->dtv_property_cache.layer[i].fec = FEC_AUTO; + fe->dtv_property_cache.layer[i].modulation = QAM_AUTO; + fe->dtv_property_cache.layer[i].interleaving = -1; + fe->dtv_property_cache.layer[i].segment_count = -1; + } + + return 0; +} + +#define _DTV_CMD(n, s, b) \ +[n] = { \ + .name = #n, \ + .cmd = n, \ + .set = s,\ + .buffer = b \ +} + static struct dtv_cmds_h dtv_cmds[] = { [DTV_TUNE] = { .name = "DTV_TUNE", @@ -949,6 +992,47 @@ static struct dtv_cmds_h dtv_cmds[] = { .cmd = DTV_TRANSMISSION_MODE, .set = 1, }, + + _DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 1, 0), + _DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 1, 0), + _DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 1, 0), + _DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 1, 0), + _DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYER_ENABLED, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_FEC, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_TIME_INTERLEAVING, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_FEC, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_MODULATION, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_SEGMENT_COUNT, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_TIME_INTERLEAVING, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_FEC, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_MODULATION, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 1, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 1, 0), + + _DTV_CMD(DTV_ISDBT_PARTIAL_RECEPTION, 0, 0), + _DTV_CMD(DTV_ISDBT_SOUND_BROADCASTING, 0, 0), + _DTV_CMD(DTV_ISDBT_SB_SUBCHANNEL_ID, 0, 0), + _DTV_CMD(DTV_ISDBT_SB_SEGMENT_IDX, 0, 0), + _DTV_CMD(DTV_ISDBT_SB_SEGMENT_COUNT, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYER_ENABLED, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_FEC, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_MODULATION, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_SEGMENT_COUNT, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERA_TIME_INTERLEAVING, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_FEC, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_MODULATION, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_SEGMENT_COUNT, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERB_TIME_INTERLEAVING, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_FEC, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_MODULATION, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 0, 0), + _DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 0, 0), + + _DTV_CMD(DTV_ISDBS_TS_ID, 1, 0), + /* Get */ [DTV_DISEQC_SLAVE_REPLY] = { .name = "DTV_DISEQC_SLAVE_REPLY", @@ -956,6 +1040,7 @@ static struct dtv_cmds_h dtv_cmds[] = { .set = 0, .buffer = 1, }, + [DTV_API_VERSION] = { .name = "DTV_API_VERSION", .cmd = DTV_API_VERSION, @@ -1165,14 +1250,21 @@ static void dtv_property_adv_params_sync(struct dvb_frontend *fe) if(c->delivery_system == SYS_ISDBT) { /* Fake out a generic DVB-T request so we pass validation in the ioctl */ p->frequency = c->frequency; - p->inversion = INVERSION_AUTO; + p->inversion = c->inversion; p->u.ofdm.constellation = QAM_AUTO; p->u.ofdm.code_rate_HP = FEC_AUTO; p->u.ofdm.code_rate_LP = FEC_AUTO; - p->u.ofdm.bandwidth = BANDWIDTH_AUTO; p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO; p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO; p->u.ofdm.hierarchy_information = HIERARCHY_AUTO; + if (c->bandwidth_hz == 8000000) + p->u.ofdm.bandwidth = BANDWIDTH_8_MHZ; + else if (c->bandwidth_hz == 7000000) + p->u.ofdm.bandwidth = BANDWIDTH_7_MHZ; + else if (c->bandwidth_hz == 6000000) + p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; + else + p->u.ofdm.bandwidth = BANDWIDTH_AUTO; } } @@ -1274,6 +1366,65 @@ static int dtv_property_process_get(struct dvb_frontend *fe, case DTV_HIERARCHY: tvp->u.data = fe->dtv_property_cache.hierarchy; break; + + /* ISDB-T Support here */ + case DTV_ISDBT_PARTIAL_RECEPTION: + tvp->u.data = fe->dtv_property_cache.isdbt_partial_reception; + break; + case DTV_ISDBT_SOUND_BROADCASTING: + tvp->u.data = fe->dtv_property_cache.isdbt_sb_mode; + break; + case DTV_ISDBT_SB_SUBCHANNEL_ID: + tvp->u.data = fe->dtv_property_cache.isdbt_sb_subchannel; + break; + case DTV_ISDBT_SB_SEGMENT_IDX: + tvp->u.data = fe->dtv_property_cache.isdbt_sb_segment_idx; + break; + case DTV_ISDBT_SB_SEGMENT_COUNT: + tvp->u.data = fe->dtv_property_cache.isdbt_sb_segment_count; + break; + case DTV_ISDBT_LAYER_ENABLED: + tvp->u.data = fe->dtv_property_cache.isdbt_layer_enabled; + break; + case DTV_ISDBT_LAYERA_FEC: + tvp->u.data = fe->dtv_property_cache.layer[0].fec; + break; + case DTV_ISDBT_LAYERA_MODULATION: + tvp->u.data = fe->dtv_property_cache.layer[0].modulation; + break; + case DTV_ISDBT_LAYERA_SEGMENT_COUNT: + tvp->u.data = fe->dtv_property_cache.layer[0].segment_count; + break; + case DTV_ISDBT_LAYERA_TIME_INTERLEAVING: + tvp->u.data = fe->dtv_property_cache.layer[0].interleaving; + break; + case DTV_ISDBT_LAYERB_FEC: + tvp->u.data = fe->dtv_property_cache.layer[1].fec; + break; + case DTV_ISDBT_LAYERB_MODULATION: + tvp->u.data = fe->dtv_property_cache.layer[1].modulation; + break; + case DTV_ISDBT_LAYERB_SEGMENT_COUNT: + tvp->u.data = fe->dtv_property_cache.layer[1].segment_count; + break; + case DTV_ISDBT_LAYERB_TIME_INTERLEAVING: + tvp->u.data = fe->dtv_property_cache.layer[1].interleaving; + break; + case DTV_ISDBT_LAYERC_FEC: + tvp->u.data = fe->dtv_property_cache.layer[2].fec; + break; + case DTV_ISDBT_LAYERC_MODULATION: + tvp->u.data = fe->dtv_property_cache.layer[2].modulation; + break; + case DTV_ISDBT_LAYERC_SEGMENT_COUNT: + tvp->u.data = fe->dtv_property_cache.layer[2].segment_count; + break; + case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: + tvp->u.data = fe->dtv_property_cache.layer[2].interleaving; + break; + case DTV_ISDBS_TS_ID: + tvp->u.data = fe->dtv_property_cache.isdbs_ts_id; + break; default: r = -1; } @@ -1302,10 +1453,8 @@ static int dtv_property_process_set(struct dvb_frontend *fe, /* Reset a cache of data specific to the frontend here. This does * not effect hardware. */ + dvb_frontend_clear_cache(fe); dprintk("%s() Flushing property cache\n", __func__); - memset(&fe->dtv_property_cache, 0, sizeof(struct dtv_frontend_properties)); - fe->dtv_property_cache.state = tvp->cmd; - fe->dtv_property_cache.delivery_system = SYS_UNDEFINED; break; case DTV_TUNE: /* interpret the cache of data, build either a traditional frontend @@ -1371,6 +1520,65 @@ static int dtv_property_process_set(struct dvb_frontend *fe, case DTV_HIERARCHY: fe->dtv_property_cache.hierarchy = tvp->u.data; break; + + /* ISDB-T Support here */ + case DTV_ISDBT_PARTIAL_RECEPTION: + fe->dtv_property_cache.isdbt_partial_reception = tvp->u.data; + break; + case DTV_ISDBT_SOUND_BROADCASTING: + fe->dtv_property_cache.isdbt_sb_mode = tvp->u.data; + break; + case DTV_ISDBT_SB_SUBCHANNEL_ID: + fe->dtv_property_cache.isdbt_sb_subchannel = tvp->u.data; + break; + case DTV_ISDBT_SB_SEGMENT_IDX: + fe->dtv_property_cache.isdbt_sb_segment_idx = tvp->u.data; + break; + case DTV_ISDBT_SB_SEGMENT_COUNT: + fe->dtv_property_cache.isdbt_sb_segment_count = tvp->u.data; + break; + case DTV_ISDBT_LAYER_ENABLED: + fe->dtv_property_cache.isdbt_layer_enabled = tvp->u.data; + break; + case DTV_ISDBT_LAYERA_FEC: + fe->dtv_property_cache.layer[0].fec = tvp->u.data; + break; + case DTV_ISDBT_LAYERA_MODULATION: + fe->dtv_property_cache.layer[0].modulation = tvp->u.data; + break; + case DTV_ISDBT_LAYERA_SEGMENT_COUNT: + fe->dtv_property_cache.layer[0].segment_count = tvp->u.data; + break; + case DTV_ISDBT_LAYERA_TIME_INTERLEAVING: + fe->dtv_property_cache.layer[0].interleaving = tvp->u.data; + break; + case DTV_ISDBT_LAYERB_FEC: + fe->dtv_property_cache.layer[1].fec = tvp->u.data; + break; + case DTV_ISDBT_LAYERB_MODULATION: + fe->dtv_property_cache.layer[1].modulation = tvp->u.data; + break; + case DTV_ISDBT_LAYERB_SEGMENT_COUNT: + fe->dtv_property_cache.layer[1].segment_count = tvp->u.data; + break; + case DTV_ISDBT_LAYERB_TIME_INTERLEAVING: + fe->dtv_property_cache.layer[1].interleaving = tvp->u.data; + break; + case DTV_ISDBT_LAYERC_FEC: + fe->dtv_property_cache.layer[2].fec = tvp->u.data; + break; + case DTV_ISDBT_LAYERC_MODULATION: + fe->dtv_property_cache.layer[2].modulation = tvp->u.data; + break; + case DTV_ISDBT_LAYERC_SEGMENT_COUNT: + fe->dtv_property_cache.layer[2].segment_count = tvp->u.data; + break; + case DTV_ISDBT_LAYERC_TIME_INTERLEAVING: + fe->dtv_property_cache.layer[2].interleaving = tvp->u.data; + break; + case DTV_ISDBS_TS_ID: + fe->dtv_property_cache.isdbs_ts_id = tvp->u.data; + break; default: r = -1; } diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index e176da472d7..810f07d6324 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -341,6 +341,23 @@ struct dtv_frontend_properties { fe_rolloff_t rolloff; fe_delivery_system_t delivery_system; + + /* ISDB-T specifics */ + u8 isdbt_partial_reception; + u8 isdbt_sb_mode; + u8 isdbt_sb_subchannel; + u32 isdbt_sb_segment_idx; + u32 isdbt_sb_segment_count; + u8 isdbt_layer_enabled; + struct { + u8 segment_count; + fe_code_rate_t fec; + fe_modulation_t modulation; + u8 interleaving; + } layer[3]; + + /* ISDB-T specifics */ + u32 isdbs_ts_id; }; struct dvb_frontend { diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c index 8c9ae0a3a27..0241a7c5c34 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.c +++ b/drivers/media/dvb/dvb-core/dvb_net.c @@ -63,6 +63,7 @@ #include <asm/uaccess.h> #include <linux/crc32.h> #include <linux/mutex.h> +#include <linux/sched.h> #include "dvb_demux.h" #include "dvb_net.h" diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c index 479dd05762a..94159b90f73 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.c +++ b/drivers/media/dvb/dvb-core/dvbdev.c @@ -447,7 +447,7 @@ static int dvb_uevent(struct device *dev, struct kobj_uevent_env *env) return 0; } -static char *dvb_nodename(struct device *dev) +static char *dvb_devnode(struct device *dev, mode_t *mode) { struct dvb_device *dvbdev = dev_get_drvdata(dev); @@ -478,7 +478,7 @@ static int __init init_dvbdev(void) goto error; } dvb_class->dev_uevent = dvb_uevent; - dvb_class->nodename = dvb_nodename; + dvb_class->devnode = dvb_devnode; return 0; error: diff --git a/drivers/media/dvb/dvb-core/dvbdev.h b/drivers/media/dvb/dvb-core/dvbdev.h index 895e2efca8a..01fc7048474 100644 --- a/drivers/media/dvb/dvb-core/dvbdev.h +++ b/drivers/media/dvb/dvb-core/dvbdev.h @@ -31,10 +31,9 @@ #define DVB_MAJOR 212 #if defined(CONFIG_DVB_MAX_ADAPTERS) && CONFIG_DVB_MAX_ADAPTERS > 0 -#define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS + #define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS #else -#warning invalid CONFIG_DVB_MAX_ADAPTERS value -#define DVB_MAX_ADAPTERS 8 + #define DVB_MAX_ADAPTERS 8 #endif #define DVB_UNSET (-1) diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 8b8bc04ee98..9744b069241 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -71,10 +71,11 @@ config DVB_USB_DIB0700 depends on DVB_USB select DVB_DIB7000P if !DVB_FE_CUSTOMISE select DVB_DIB7000M if !DVB_FE_CUSTOMISE + select DVB_DIB8000 if !DVB_FE_CUSTOMISE select DVB_DIB3000MC if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT3305 if !DVB_FE_CUSTOMISE - select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE + select DVB_TUNER_DIB0070 select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE @@ -87,7 +88,7 @@ config DVB_USB_DIB0700 Avermedia and other big and small companies. For an up-to-date list of devices supported by this driver, have a look - on the Linux-DVB Wiki at www.linuxtv.org. + on the LinuxTV Wiki at www.linuxtv.org. Say Y if you own such a device and want to use it. You should build it as a module. @@ -315,3 +316,9 @@ config DVB_USB_CE6230 select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE help Say Y here to support the Intel CE6230 DVB-T USB2.0 receiver + +config DVB_USB_FRIIO + tristate "Friio ISDB-T USB2.0 Receiver support" + depends on DVB_USB + help + Say Y here to support the Japanese DTV receiver Friio. diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index f92734ed777..85b83a43d55 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -79,6 +79,9 @@ obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o dvb-usb-ce6230-objs = ce6230.o obj-$(CONFIG_DVB_USB_CE6230) += dvb-usb-ce6230.o +dvb-usb-friio-objs = friio.o friio-fe.o +obj-$(CONFIG_DVB_USB_FRIIO) += dvb-usb-friio.o + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ # due to tuner-xc3028 EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 99cdd0d101c..cf042b309b4 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -61,10 +61,13 @@ static struct af9013_config af9015_af9013_config[] = { static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) { +#define BUF_LEN 63 +#define REQ_HDR_LEN 8 /* send header size */ +#define ACK_HDR_LEN 2 /* rece header size */ int act_len, ret; - u8 buf[64]; + u8 buf[BUF_LEN]; u8 write = 1; - u8 msg_len = 8; + u8 msg_len = REQ_HDR_LEN; static u8 seq; /* packet sequence number */ if (mutex_lock_interruptible(&af9015_usb_mutex) < 0) @@ -94,7 +97,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) break; case WRITE_MEMORY: if (((req->addr & 0xff00) == 0xff00) || - ((req->addr & 0xae00) == 0xae00)) + ((req->addr & 0xff00) == 0xae00)) buf[0] = WRITE_VIRTUAL_MEMORY; case WRITE_VIRTUAL_MEMORY: case COPY_FIRMWARE: @@ -107,17 +110,26 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) goto error_unlock; } + /* buffer overflow check */ + if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) || + (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) { + err("too much data; cmd:%d len:%d", req->cmd, req->data_len); + ret = -EINVAL; + goto error_unlock; + } + /* write requested */ if (write) { - memcpy(&buf[8], req->data, req->data_len); + memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len); msg_len += req->data_len; } + deb_xfer(">>> "); debug_dump(buf, msg_len, deb_xfer); /* send req */ ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len, - &act_len, AF9015_USB_TIMEOUT); + &act_len, AF9015_USB_TIMEOUT); if (ret) err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len); else @@ -130,10 +142,14 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB) goto exit_unlock; - /* receive ack and data if read req */ - msg_len = 1 + 1 + req->data_len; /* seq + status + data len */ + /* write receives seq + status = 2 bytes + read receives seq + status + data = 2 + N bytes */ + msg_len = ACK_HDR_LEN; + if (!write) + msg_len += req->data_len; + ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len, - &act_len, AF9015_USB_TIMEOUT); + &act_len, AF9015_USB_TIMEOUT); if (ret) { err("recv bulk message failed:%d", ret); ret = -1; @@ -159,7 +175,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) /* read request, copy returned data to return buf */ if (!write) - memcpy(req->data, &buf[2], req->data_len); + memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len); error_unlock: exit_unlock: @@ -369,12 +385,14 @@ static int af9015_init_endpoint(struct dvb_usb_device *d) u8 packet_size; deb_info("%s: USB speed:%d\n", __func__, d->udev->speed); + /* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0. + We use smaller - about 1/4 from the original, 5 and 87. */ #define TS_PACKET_SIZE 188 -#define TS_USB20_PACKET_COUNT 348 +#define TS_USB20_PACKET_COUNT 87 #define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT) -#define TS_USB11_PACKET_COUNT 21 +#define TS_USB11_PACKET_COUNT 5 #define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT) #define TS_USB20_MAX_PACKET_SIZE 512 @@ -868,13 +886,13 @@ static int af9015_read_config(struct usb_device *udev) /* USB1.1 set smaller buffersize and disable 2nd adapter */ if (udev->speed == USB_SPEED_FULL) { af9015_properties[i].adapter[0].stream.u.bulk.buffersize - = TS_USB11_MAX_PACKET_SIZE; + = TS_USB11_FRAME_SIZE; /* disable 2nd adapter because we don't have PID-filters */ af9015_config.dual_mode = 0; } else { af9015_properties[i].adapter[0].stream.u.bulk.buffersize - = TS_USB20_MAX_PACKET_SIZE; + = TS_USB20_FRAME_SIZE; } } @@ -1310,7 +1328,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .u = { .bulk = { .buffersize = - TS_USB20_MAX_PACKET_SIZE, + TS_USB20_FRAME_SIZE, } } }, @@ -1416,7 +1434,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .u = { .bulk = { .buffersize = - TS_USB20_MAX_PACKET_SIZE, + TS_USB20_FRAME_SIZE, } } }, @@ -1522,7 +1540,7 @@ static struct dvb_usb_device_properties af9015_properties[] = { .u = { .bulk = { .buffersize = - TS_USB20_MAX_PACKET_SIZE, + TS_USB20_FRAME_SIZE, } } }, diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 7381aff4dcf..2ae7f648eff 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -203,11 +203,11 @@ static struct i2c_algorithm anysee_i2c_algo = { static int anysee_mt352_demod_init(struct dvb_frontend *fe) { - static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x28 }; - static u8 reset [] = { RESET, 0x80 }; - static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; - static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0x20 }; - static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x33 }; + static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x28 }; + static u8 reset[] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0x20 }; + static u8 gpp_ctl_cfg[] = { GPP_CTL, 0x33 }; static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; mt352_write(fe, clock_config, sizeof(clock_config)); @@ -485,7 +485,7 @@ static int anysee_probe(struct usb_interface *intf, return ret; } -static struct usb_device_id anysee_table [] = { +static struct usb_device_id anysee_table[] = { { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE) }, { USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE) }, { } /* Terminating entry */ @@ -511,7 +511,7 @@ static struct dvb_usb_device_properties anysee_properties = { .endpoint = 0x82, .u = { .bulk = { - .buffersize = 512, + .buffersize = (16*512), } } }, diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c index 52badc00e67..0737c637789 100644 --- a/drivers/media/dvb/dvb-usb/ce6230.c +++ b/drivers/media/dvb/dvb-usb/ce6230.c @@ -274,7 +274,7 @@ static struct dvb_usb_device_properties ce6230_properties = { .endpoint = 0x82, .u = { .bulk = { - .buffersize = 512, + .buffersize = (16*512), } } }, diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index d1d6f449140..0b2812aa30a 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -4,13 +4,14 @@ * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. * - * Copyright (C) 2005-7 DiBcom, SA + * Copyright (C) 2005-9 DiBcom, SA et al */ #include "dib0700.h" #include "dib3000mc.h" #include "dib7000m.h" #include "dib7000p.h" +#include "dib8000.h" #include "mt2060.h" #include "mt2266.h" #include "tuner-xc2028.h" @@ -1098,11 +1099,13 @@ static struct dibx000_agc_config dib7070_agc_config = { static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) { + deb_info("reset: %d", onoff); return dib7000p_set_gpio(fe, 8, 0, !onoff); } static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) { + deb_info("sleep: %d", onoff); return dib7000p_set_gpio(fe, 9, 0, onoff); } @@ -1112,16 +1115,26 @@ static struct dib0070_config dib7070p_dib0070_config[2] = { .reset = dib7070_tuner_reset, .sleep = dib7070_tuner_sleep, .clock_khz = 12000, - .clock_pad_drive = 4 + .clock_pad_drive = 4, + .charge_pump = 2, }, { .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, .reset = dib7070_tuner_reset, .sleep = dib7070_tuner_sleep, .clock_khz = 12000, - + .charge_pump = 2, } }; +static struct dib0070_config dib7770p_dib0070_config = { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib7070_tuner_reset, + .sleep = dib7070_tuner_sleep, + .clock_khz = 12000, + .clock_pad_drive = 0, + .flip_chip = 1, +}; + static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep) { struct dvb_usb_adapter *adap = fe->dvb->priv; @@ -1139,6 +1152,45 @@ static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_fronte return state->set_param_save(fe, fep); } +static int dib7770_set_param_override(struct dvb_frontend *fe, + struct dvb_frontend_parameters *fep) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + + u16 offset; + u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); + switch (band) { + case BAND_VHF: + dib7000p_set_gpio(fe, 0, 0, 1); + offset = 850; + break; + case BAND_UHF: + default: + dib7000p_set_gpio(fe, 0, 0, 0); + offset = 250; + break; + } + deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); + dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); + return state->set_param_save(fe, fep); +} + +static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + + if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, + &dib7770p_dib0070_config) == NULL) + return -ENODEV; + + st->set_param_save = adap->fe->ops.tuner_ops.set_params; + adap->fe->ops.tuner_ops.set_params = dib7770_set_param_override; + return 0; +} + static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; @@ -1217,6 +1269,306 @@ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) return adap->fe == NULL ? -ENODEV : 0; } +/* DIB807x generic */ +static struct dibx000_agc_config dib807x_agc_config[2] = { + { + BAND_VHF, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, + * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, + * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, + * P_agc_write=0 */ + (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) | + (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | + (0 << 0), /* setup*/ + + 600, /* inv_gain*/ + 10, /* time_stabiliz*/ + + 0, /* alpha_level*/ + 118, /* thlock*/ + + 0, /* wbd_inv*/ + 3530, /* wbd_ref*/ + 1, /* wbd_sel*/ + 5, /* wbd_alpha*/ + + 65535, /* agc1_max*/ + 0, /* agc1_min*/ + + 65535, /* agc2_max*/ + 0, /* agc2_min*/ + + 0, /* agc1_pt1*/ + 40, /* agc1_pt2*/ + 183, /* agc1_pt3*/ + 206, /* agc1_slope1*/ + 255, /* agc1_slope2*/ + 72, /* agc2_pt1*/ + 152, /* agc2_pt2*/ + 88, /* agc2_slope1*/ + 90, /* agc2_slope2*/ + + 17, /* alpha_mant*/ + 27, /* alpha_exp*/ + 23, /* beta_mant*/ + 51, /* beta_exp*/ + + 0, /* perform_agc_softsplit*/ + }, { + BAND_UHF, + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, + * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, + * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, + * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, + * P_agc_write=0 */ + (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) | + (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | + (0 << 0), /* setup */ + + 600, /* inv_gain*/ + 10, /* time_stabiliz*/ + + 0, /* alpha_level*/ + 118, /* thlock*/ + + 0, /* wbd_inv*/ + 3530, /* wbd_ref*/ + 1, /* wbd_sel*/ + 5, /* wbd_alpha*/ + + 65535, /* agc1_max*/ + 0, /* agc1_min*/ + + 65535, /* agc2_max*/ + 0, /* agc2_min*/ + + 0, /* agc1_pt1*/ + 40, /* agc1_pt2*/ + 183, /* agc1_pt3*/ + 206, /* agc1_slope1*/ + 255, /* agc1_slope2*/ + 72, /* agc2_pt1*/ + 152, /* agc2_pt2*/ + 88, /* agc2_slope1*/ + 90, /* agc2_slope2*/ + + 17, /* alpha_mant*/ + 27, /* alpha_exp*/ + 23, /* beta_mant*/ + 51, /* beta_exp*/ + + 0, /* perform_agc_softsplit*/ + } +}; + +static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = { + 60000, 15000, /* internal, sampling*/ + 1, 20, 3, 1, 0, /* pll_cfg: prediv, ratio, range, reset, bypass*/ + 0, 0, 1, 1, 2, /* misc: refdiv, bypclk_div, IO_CLK_en_core, + ADClkSrc, modulo */ + (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/ + (0 << 25) | 0, /* ifreq = 0.000000 MHz*/ + 18179755, /* timf*/ + 12000000, /* xtal_hz*/ +}; + +static struct dib8000_config dib807x_dib8000_config[2] = { + { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 2, + .agc = dib807x_agc_config, + .pll = &dib807x_bw_config_12_mhz, + .tuner_is_baseband = 1, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .div_cfg = 1, + .agc_control = &dib0070_ctrl_agc_filter, + .output_mode = OUTMODE_MPEG2_FIFO, + .drives = 0x2d98, + }, { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 2, + .agc = dib807x_agc_config, + .pll = &dib807x_bw_config_12_mhz, + .tuner_is_baseband = 1, + + .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .agc_control = &dib0070_ctrl_agc_filter, + .output_mode = OUTMODE_MPEG2_FIFO, + .drives = 0x2d98, + } +}; + +static int dib807x_tuner_reset(struct dvb_frontend *fe, int onoff) +{ + return dib8000_set_gpio(fe, 5, 0, !onoff); +} + +static int dib807x_tuner_sleep(struct dvb_frontend *fe, int onoff) +{ + return dib8000_set_gpio(fe, 0, 0, onoff); +} + +static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = { + { 240, 7}, + { 0xffff, 6}, +}; + +static struct dib0070_config dib807x_dib0070_config[2] = { + { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib807x_tuner_reset, + .sleep = dib807x_tuner_sleep, + .clock_khz = 12000, + .clock_pad_drive = 4, + .vga_filter = 1, + .force_crystal_mode = 1, + .enable_third_order_filter = 1, + .charge_pump = 0, + .wbd_gain = dib8070_wbd_gain_cfg, + .osc_buffer_state = 0, + .freq_offset_khz_uhf = -100, + .freq_offset_khz_vhf = -100, + }, { + .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, + .reset = dib807x_tuner_reset, + .sleep = dib807x_tuner_sleep, + .clock_khz = 12000, + .clock_pad_drive = 2, + .vga_filter = 1, + .force_crystal_mode = 1, + .enable_third_order_filter = 1, + .charge_pump = 0, + .wbd_gain = dib8070_wbd_gain_cfg, + .osc_buffer_state = 0, + .freq_offset_khz_uhf = -25, + .freq_offset_khz_vhf = -25, + } +}; + +static int dib807x_set_param_override(struct dvb_frontend *fe, + struct dvb_frontend_parameters *fep) +{ + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct dib0700_adapter_state *state = adap->priv; + + u16 offset = dib0070_wbd_offset(fe); + u8 band = BAND_OF_FREQUENCY(fep->frequency/1000); + switch (band) { + case BAND_VHF: + offset += 750; + break; + case BAND_UHF: /* fall-thru wanted */ + default: + offset += 250; break; + } + deb_info("WBD for DiB8000: %d\n", offset); + dib8000_set_wbd_ref(fe, offset); + + return state->set_param_save(fe, fep); +} + +static int dib807x_tuner_attach(struct dvb_usb_adapter *adap) +{ + struct dib0700_adapter_state *st = adap->priv; + struct i2c_adapter *tun_i2c = dib8000_get_i2c_master(adap->fe, + DIBX000_I2C_INTERFACE_TUNER, 1); + + if (adap->id == 0) { + if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, + &dib807x_dib0070_config[0]) == NULL) + return -ENODEV; + } else { + if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, + &dib807x_dib0070_config[1]) == NULL) + return -ENODEV; + } + + st->set_param_save = adap->fe->ops.tuner_ops.set_params; + adap->fe->ops.tuner_ops.set_params = dib807x_set_param_override; + return 0; +} + + +/* STK807x */ +static int stk807x_frontend_attach(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + 0x80); + + adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, + &dib807x_dib8000_config[0]); + + return adap->fe == NULL ? -ENODEV : 0; +} + +/* STK807xPVR */ +static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap) +{ + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + msleep(30); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(500); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + /* initialize IC 0 */ + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x80); + + adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x80, + &dib807x_dib8000_config[0]); + + return adap->fe == NULL ? -ENODEV : 0; +} + +static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap) +{ + /* initialize IC 1 */ + dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x82); + + adap->fe = dvb_attach(dib8000_attach, &adap->dev->i2c_adap, 0x82, + &dib807x_dib8000_config[1]); + + return adap->fe == NULL ? -ENODEV : 0; +} + + /* STK7070PD */ static struct dib7000p_config stk7070pd_dib7000p_config[2] = { { @@ -1500,7 +1852,15 @@ struct usb_device_id dib0700_usb_id_table[] = { { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T3) }, { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T5) }, { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D) }, - { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) }, +/* 55 */{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_STK7700D_2) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73A) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) }, + { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7770P) }, +/* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) }, + { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) }, + { USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) }, { 0 } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); @@ -1565,7 +1925,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { { NULL }, }, { "Leadtek Winfast DTV Dongle (STK7700P based)", - { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] }, + { &dib0700_usb_id_table[8] }, { NULL }, }, { "AVerMedia AVerTV DVB-T Express", @@ -1764,6 +2124,41 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .frontend_attach = stk7070p_frontend_attach, + .tuner_attach = dib7070p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + .size_of_priv = sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 3, + .devices = { + { "Pinnacle PCTV 73A", + { &dib0700_usb_id_table[56], NULL }, + { NULL }, + }, + { "Pinnacle PCTV 73e SE", + { &dib0700_usb_id_table[57], NULL }, + { NULL }, + }, + { "Pinnacle PCTV 282e", + { &dib0700_usb_id_table[58], NULL }, + { NULL }, + }, + }, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query + + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 2, .adapter = { { @@ -1927,6 +2322,102 @@ struct dvb_usb_device_properties dib0700_devices[] = { { NULL }, }, }, + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + + .num_adapters = 1, + .adapter = { + { + .frontend_attach = stk7070p_frontend_attach, + .tuner_attach = dib7770p_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 2, + .devices = { + { "DiBcom STK7770P reference design", + { &dib0700_usb_id_table[59], NULL }, + { NULL }, + }, + { "Terratec Cinergy T USB XXS (HD)", + { &dib0700_usb_id_table[34], &dib0700_usb_id_table[60] }, + { NULL }, + }, + }, + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 1, + .adapter = { + { + .frontend_attach = stk807x_frontend_attach, + .tuner_attach = dib807x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 2, + .devices = { + { "DiBcom STK807xP reference design", + { &dib0700_usb_id_table[62], NULL }, + { NULL }, + }, + { "Prolink Pixelview SBTVD", + { &dib0700_usb_id_table[63], NULL }, + { NULL }, + }, + }, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query + + }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, + .num_adapters = 2, + .adapter = { + { + .frontend_attach = stk807xpvr_frontend_attach0, + .tuner_attach = dib807x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x02), + + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + { + .frontend_attach = stk807xpvr_frontend_attach1, + .tuner_attach = dib807x_tuner_attach, + + DIB0700_DEFAULT_STREAMING_CONFIG(0x03), + + .size_of_priv = + sizeof(struct dib0700_adapter_state), + }, + }, + + .num_device_descs = 1, + .devices = { + { "DiBcom STK807xPVR reference design", + { &dib0700_usb_id_table[61], NULL }, + { NULL }, + }, + }, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dib0700_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dib0700_rc_keys), + .rc_query = dib0700_rc_query }, }; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index 185a5069b10..a548c14c194 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -46,6 +46,7 @@ #define USB_VID_MSI_2 0x1462 #define USB_VID_OPERA1 0x695c #define USB_VID_PINNACLE 0x2304 +#define USB_VID_PIXELVIEW 0x1554 #define USB_VID_TECHNOTREND 0x0b48 #define USB_VID_TERRATEC 0x0ccd #define USB_VID_TELESTAR 0x10b9 @@ -59,6 +60,7 @@ #define USB_VID_YUAN 0x1164 #define USB_VID_XTENSIONS 0x1ae7 #define USB_VID_HUMAX_COEX 0x10b9 +#define USB_VID_774 0x7a69 /* Product IDs */ #define USB_PID_ADSTECH_USB2_COLD 0xa333 @@ -95,7 +97,10 @@ #define USB_PID_DIBCOM_STK7700_U7000 0x7001 #define USB_PID_DIBCOM_STK7070P 0x1ebc #define USB_PID_DIBCOM_STK7070PD 0x1ebe +#define USB_PID_DIBCOM_STK807XP 0x1f90 +#define USB_PID_DIBCOM_STK807XPVR 0x1f98 #define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 +#define USB_PID_DIBCOM_STK7770P 0x1e80 #define USB_PID_DPOSH_M9206_COLD 0x9206 #define USB_PID_DPOSH_M9206_WARM 0xa090 #define USB_PID_UNIWILL_STK7700P 0x6003 @@ -184,6 +189,7 @@ #define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 #define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 #define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 +#define USB_PID_TERRATEC_CINERGY_T_XXS_2 0x00ab #define USB_PID_TERRATEC_T3 0x10a0 #define USB_PID_TERRATEC_T5 0x10a1 #define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e @@ -195,6 +201,10 @@ #define USB_PID_PINNACLE_PCTV73E 0x0237 #define USB_PID_PINNACLE_PCTV801E 0x023a #define USB_PID_PINNACLE_PCTV801E_SE 0x023b +#define USB_PID_PINNACLE_PCTV73A 0x0243 +#define USB_PID_PINNACLE_PCTV73ESE 0x0245 +#define USB_PID_PINNACLE_PCTV282E 0x0248 +#define USB_PID_PIXELVIEW_SBTVD 0x5010 #define USB_PID_PCTV_200E 0x020e #define USB_PID_PCTV_400E 0x020f #define USB_PID_PCTV_450E 0x0222 @@ -265,5 +275,6 @@ #define USB_PID_ELGATO_EYETV_DTT_Dlx 0x0020 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD 0x5000 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM 0x5001 +#define USB_PID_FRIIO_WHITE 0x0001 #endif diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c new file mode 100644 index 00000000000..c4dfe25cf60 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/friio-fe.c @@ -0,0 +1,483 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp> + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include <linux/init.h> +#include <linux/string.h> +#include <linux/slab.h> + +#include "friio.h" + +struct jdvbt90502_state { + struct i2c_adapter *i2c; + struct dvb_frontend frontend; + struct jdvbt90502_config config; +}; + +/* NOTE: TC90502 has 16bit register-address? */ +/* register 0x0100 is used for reading PLL status, so reg is u16 here */ +static int jdvbt90502_reg_read(struct jdvbt90502_state *state, + const u16 reg, u8 *buf, const size_t count) +{ + int ret; + u8 wbuf[3]; + struct i2c_msg msg[2]; + + wbuf[0] = reg & 0xFF; + wbuf[1] = 0; + wbuf[2] = reg >> 8; + + msg[0].addr = state->config.demod_address; + msg[0].flags = 0; + msg[0].buf = wbuf; + msg[0].len = sizeof(wbuf); + + msg[1].addr = msg[0].addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) { + deb_fe(" reg read failed.\n"); + return -EREMOTEIO; + } + return 0; +} + +/* currently 16bit register-address is not used, so reg is u8 here */ +static int jdvbt90502_single_reg_write(struct jdvbt90502_state *state, + const u8 reg, const u8 val) +{ + struct i2c_msg msg; + u8 wbuf[2]; + + wbuf[0] = reg; + wbuf[1] = val; + + msg.addr = state->config.demod_address; + msg.flags = 0; + msg.buf = wbuf; + msg.len = sizeof(wbuf); + + if (i2c_transfer(state->i2c, &msg, 1) != 1) { + deb_fe(" reg write failed."); + return -EREMOTEIO; + } + return 0; +} + +static int _jdvbt90502_write(struct dvb_frontend *fe, u8 *buf, int len) +{ + struct jdvbt90502_state *state = fe->demodulator_priv; + int err, i; + for (i = 0; i < len - 1; i++) { + err = jdvbt90502_single_reg_write(state, + buf[0] + i, buf[i + 1]); + if (err) + return err; + } + + return 0; +} + +/* read pll status byte via the demodulator's I2C register */ +/* note: Win box reads it by 8B block at the I2C addr 0x30 from reg:0x80 */ +static int jdvbt90502_pll_read(struct jdvbt90502_state *state, u8 *result) +{ + int ret; + + /* +1 for reading */ + u8 pll_addr_byte = (state->config.pll_address << 1) + 1; + + *result = 0; + + ret = jdvbt90502_single_reg_write(state, JDVBT90502_2ND_I2C_REG, + pll_addr_byte); + if (ret) + goto error; + + ret = jdvbt90502_reg_read(state, 0x0100, result, 1); + if (ret) + goto error; + + deb_fe("PLL read val:%02x\n", *result); + return 0; + +error: + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; +} + + +/* set pll frequency via the demodulator's I2C register */ +static int jdvbt90502_pll_set_freq(struct jdvbt90502_state *state, u32 freq) +{ + int ret; + int retry; + u8 res1; + u8 res2[9]; + + u8 pll_freq_cmd[PLL_CMD_LEN]; + u8 pll_agc_cmd[PLL_CMD_LEN]; + struct i2c_msg msg[2]; + u32 f; + + deb_fe("%s: freq=%d, step=%d\n", __func__, freq, + state->frontend.ops.info.frequency_stepsize); + /* freq -> oscilator frequency conversion. */ + /* freq: 473,000,000 + n*6,000,000 (no 1/7MHz shift to center freq) */ + /* add 400[1/7 MHZ] = 57.142857MHz. 57MHz for the IF, */ + /* 1/7MHz for center freq shift */ + f = freq / state->frontend.ops.info.frequency_stepsize; + f += 400; + pll_freq_cmd[DEMOD_REDIRECT_REG] = JDVBT90502_2ND_I2C_REG; /* 0xFE */ + pll_freq_cmd[ADDRESS_BYTE] = state->config.pll_address << 1; + pll_freq_cmd[DIVIDER_BYTE1] = (f >> 8) & 0x7F; + pll_freq_cmd[DIVIDER_BYTE2] = f & 0xFF; + pll_freq_cmd[CONTROL_BYTE] = 0xB2; /* ref.divider:28, 4MHz/28=1/7MHz */ + pll_freq_cmd[BANDSWITCH_BYTE] = 0x08; /* UHF band */ + + msg[0].addr = state->config.demod_address; + msg[0].flags = 0; + msg[0].buf = pll_freq_cmd; + msg[0].len = sizeof(pll_freq_cmd); + + ret = i2c_transfer(state->i2c, &msg[0], 1); + if (ret != 1) + goto error; + + udelay(50); + + pll_agc_cmd[DEMOD_REDIRECT_REG] = pll_freq_cmd[DEMOD_REDIRECT_REG]; + pll_agc_cmd[ADDRESS_BYTE] = pll_freq_cmd[ADDRESS_BYTE]; + pll_agc_cmd[DIVIDER_BYTE1] = pll_freq_cmd[DIVIDER_BYTE1]; + pll_agc_cmd[DIVIDER_BYTE2] = pll_freq_cmd[DIVIDER_BYTE2]; + pll_agc_cmd[CONTROL_BYTE] = 0x9A; /* AGC_CTRL instead of BANDSWITCH */ + pll_agc_cmd[AGC_CTRL_BYTE] = 0x50; + /* AGC Time Constant 2s, AGC take-over point:103dBuV(lowest) */ + + msg[1].addr = msg[0].addr; + msg[1].flags = 0; + msg[1].buf = pll_agc_cmd; + msg[1].len = sizeof(pll_agc_cmd); + + ret = i2c_transfer(state->i2c, &msg[1], 1); + if (ret != 1) + goto error; + + /* I don't know what these cmds are for, */ + /* but the USB log on a windows box contains them */ + ret = jdvbt90502_single_reg_write(state, 0x01, 0x40); + ret |= jdvbt90502_single_reg_write(state, 0x01, 0x00); + if (ret) + goto error; + udelay(100); + + /* wait for the demod to be ready? */ +#define RETRY_COUNT 5 + for (retry = 0; retry < RETRY_COUNT; retry++) { + ret = jdvbt90502_reg_read(state, 0x0096, &res1, 1); + if (ret) + goto error; + /* if (res1 != 0x00) goto error; */ + ret = jdvbt90502_reg_read(state, 0x00B0, res2, sizeof(res2)); + if (ret) + goto error; + if (res2[0] >= 0xA7) + break; + msleep(100); + } + if (retry >= RETRY_COUNT) { + deb_fe("%s: FE does not get ready after freq setting.\n", + __func__); + return -EREMOTEIO; + } + + return 0; +error: + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; +} + +static int jdvbt90502_read_status(struct dvb_frontend *fe, fe_status_t *state) +{ + u8 result; + int ret; + + *state = FE_HAS_SIGNAL; + + ret = jdvbt90502_pll_read(fe->demodulator_priv, &result); + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + *state = FE_HAS_SIGNAL + | FE_HAS_CARRIER + | FE_HAS_VITERBI + | FE_HAS_SYNC; + + if (result & PLL_STATUS_LOCKED) + *state |= FE_HAS_LOCK; + + return 0; +} + +static int jdvbt90502_read_ber(struct dvb_frontend *fe, u32 *ber) +{ + *ber = 0; + return 0; +} + +static int jdvbt90502_read_signal_strength(struct dvb_frontend *fe, + u16 *strength) +{ + int ret; + u8 rbuf[37]; + + *strength = 0; + + /* status register (incl. signal strength) : 0x89 */ + /* TODO: read just the necessary registers [0x8B..0x8D]? */ + ret = jdvbt90502_reg_read(fe->demodulator_priv, 0x0089, + rbuf, sizeof(rbuf)); + + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + /* signal_strength: rbuf[2-4] (24bit BE), use lower 16bit for now. */ + *strength = (rbuf[3] << 8) + rbuf[4]; + if (rbuf[2]) + *strength = 0xffff; + + return 0; +} + +static int jdvbt90502_read_snr(struct dvb_frontend *fe, u16 *snr) +{ + *snr = 0x0101; + return 0; +} + +static int jdvbt90502_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) +{ + *ucblocks = 0; + return 0; +} + +static int jdvbt90502_get_tune_settings(struct dvb_frontend *fe, + struct dvb_frontend_tune_settings *fs) +{ + fs->min_delay_ms = 500; + fs->step_size = 0; + fs->max_drift = 0; + + return 0; +} + +static int jdvbt90502_get_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + p->inversion = INVERSION_AUTO; + p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ; + p->u.ofdm.code_rate_HP = FEC_AUTO; + p->u.ofdm.code_rate_LP = FEC_AUTO; + p->u.ofdm.constellation = QAM_64; + p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO; + p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO; + p->u.ofdm.hierarchy_information = HIERARCHY_AUTO; + return 0; +} + +static int jdvbt90502_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + /** + * NOTE: ignore all the paramters except frequency. + * others should be fixed to the proper value for ISDB-T, + * but don't check here. + */ + + struct jdvbt90502_state *state = fe->demodulator_priv; + int ret; + + deb_fe("%s: Freq:%d\n", __func__, p->frequency); + + ret = jdvbt90502_pll_set_freq(state, p->frequency); + if (ret) { + deb_fe("%s:ret == %d\n", __func__, ret); + return -EREMOTEIO; + } + + return 0; +} + +static int jdvbt90502_sleep(struct dvb_frontend *fe) +{ + deb_fe("%s called.\n", __func__); + return 0; +} + + +/** + * (reg, val) commad list to initialize this module. + * captured on a Windows box. + */ +static u8 init_code[][2] = { + {0x01, 0x40}, + {0x04, 0x38}, + {0x05, 0x40}, + {0x07, 0x40}, + {0x0F, 0x4F}, + {0x11, 0x21}, + {0x12, 0x0B}, + {0x13, 0x2F}, + {0x14, 0x31}, + {0x16, 0x02}, + {0x21, 0xC4}, + {0x22, 0x20}, + {0x2C, 0x79}, + {0x2D, 0x34}, + {0x2F, 0x00}, + {0x30, 0x28}, + {0x31, 0x31}, + {0x32, 0xDF}, + {0x38, 0x01}, + {0x39, 0x78}, + {0x3B, 0x33}, + {0x3C, 0x33}, + {0x48, 0x90}, + {0x51, 0x68}, + {0x5E, 0x38}, + {0x71, 0x00}, + {0x72, 0x08}, + {0x77, 0x00}, + {0xC0, 0x21}, + {0xC1, 0x10}, + {0xE4, 0x1A}, + {0xEA, 0x1F}, + {0x77, 0x00}, + {0x71, 0x00}, + {0x71, 0x00}, + {0x76, 0x0C}, +}; + +const static int init_code_len = sizeof(init_code) / sizeof(u8[2]); + +static int jdvbt90502_init(struct dvb_frontend *fe) +{ + int i = -1; + int ret; + struct i2c_msg msg; + + struct jdvbt90502_state *state = fe->demodulator_priv; + + deb_fe("%s called.\n", __func__); + + msg.addr = state->config.demod_address; + msg.flags = 0; + msg.len = 2; + for (i = 0; i < init_code_len; i++) { + msg.buf = init_code[i]; + ret = i2c_transfer(state->i2c, &msg, 1); + if (ret != 1) + goto error; + } + msleep(100); + + return 0; + +error: + deb_fe("%s: init_code[%d] failed. ret==%d\n", __func__, i, ret); + return -EREMOTEIO; +} + + +static void jdvbt90502_release(struct dvb_frontend *fe) +{ + struct jdvbt90502_state *state = fe->demodulator_priv; + kfree(state); +} + + +static struct dvb_frontend_ops jdvbt90502_ops; + +struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d) +{ + struct jdvbt90502_state *state = NULL; + + deb_info("%s called.\n", __func__); + + /* allocate memory for the internal state */ + state = kzalloc(sizeof(struct jdvbt90502_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->i2c = &d->i2c_adap; + memcpy(&state->config, &friio_fe_config, sizeof(friio_fe_config)); + + /* create dvb_frontend */ + memcpy(&state->frontend.ops, &jdvbt90502_ops, + sizeof(jdvbt90502_ops)); + state->frontend.demodulator_priv = state; + + if (jdvbt90502_init(&state->frontend) < 0) + goto error; + + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops jdvbt90502_ops = { + + .info = { + .name = "Comtech JDVBT90502 ISDB-T", + .type = FE_OFDM, + .frequency_min = 473000000, /* UHF 13ch, center */ + .frequency_max = 767142857, /* UHF 62ch, center */ + .frequency_stepsize = JDVBT90502_PLL_CLK / + JDVBT90502_PLL_DIVIDER, + .frequency_tolerance = 0, + + /* NOTE: this driver ignores all parameters but frequency. */ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_4_5 | FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | + FE_CAN_FEC_7_8 | FE_CAN_FEC_8_9 | FE_CAN_FEC_AUTO | + FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = jdvbt90502_release, + + .init = jdvbt90502_init, + .sleep = jdvbt90502_sleep, + .write = _jdvbt90502_write, + + .set_frontend = jdvbt90502_set_frontend, + .get_frontend = jdvbt90502_get_frontend, + .get_tune_settings = jdvbt90502_get_tune_settings, + + .read_status = jdvbt90502_read_status, + .read_ber = jdvbt90502_read_ber, + .read_signal_strength = jdvbt90502_read_signal_strength, + .read_snr = jdvbt90502_read_snr, + .read_ucblocks = jdvbt90502_read_ucblocks, +}; diff --git a/drivers/media/dvb/dvb-usb/friio.c b/drivers/media/dvb/dvb-usb/friio.c new file mode 100644 index 00000000000..14a65b4aec0 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/friio.c @@ -0,0 +1,525 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp> + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "friio.h" + +/* debug */ +int dvb_usb_friio_debug; +module_param_named(debug, dvb_usb_friio_debug, int, 0644); +MODULE_PARM_DESC(debug, + "set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))." + DVB_USB_DEBUG_STATUS); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/** + * Indirect I2C access to the PLL via FE. + * whole I2C protocol data to the PLL is sent via the FE's I2C register. + * This is done by a control msg to the FE with the I2C data accompanied, and + * a specific USB request number is assigned for that purpose. + * + * this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE). + * TODO: refoctored, smarter i2c functions. + */ +static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u16 index = wbuf[0]; /* must be JDVBT90502_2ND_I2C_REG(=0xFE) */ + u16 value = addr << (8 + 1); + int wo = (rbuf == NULL || rlen == 0); /* write only */ + u8 req, type; + + deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n", + wbuf[1], wbuf[0], wlen - 1); + + if (wo && wlen >= 2) { + req = GL861_REQ_I2C_DATA_CTRL_WRITE; + type = GL861_WRITE; + udelay(20); + return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + req, type, value, index, + &wbuf[1], wlen - 1, 2000); + } + + deb_xfer("not supported ctrl-msg, aborting."); + return -EINVAL; +} + +/* normal I2C access (without extra data arguments). + * write to the register wbuf[0] at I2C address addr with the value wbuf[1], + * or read from the register wbuf[0]. + * register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3 + */ +static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u16 index; + u16 value = addr << (8 + 1); + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 req, type; + unsigned int pipe; + + /* special case for the indirect I2C access to the PLL via FE, */ + if (addr == friio_fe_config.demod_address && + wbuf[0] == JDVBT90502_2ND_I2C_REG) + return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen); + + if (wo) { + req = GL861_REQ_I2C_WRITE; + type = GL861_WRITE; + pipe = usb_sndctrlpipe(d->udev, 0); + } else { /* rw */ + req = GL861_REQ_I2C_READ; + type = GL861_READ; + pipe = usb_rcvctrlpipe(d->udev, 0); + } + + switch (wlen) { + case 1: + index = wbuf[0]; + break; + case 2: + index = wbuf[0]; + value = value + wbuf[1]; + break; + case 3: + /* special case for 16bit register-address */ + index = (wbuf[2] << 8) | wbuf[0]; + value = value + wbuf[1]; + break; + default: + deb_xfer("wlen = %x, aborting.", wlen); + return -EINVAL; + } + msleep(1); + return usb_control_msg(d->udev, pipe, req, type, + value, index, rbuf, rlen, 2000); +} + +/* I2C */ +static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], + int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + + if (num > 2) + return -EINVAL; + + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + return -EAGAIN; + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) { + if (gl861_i2c_msg(d, msg[i].addr, + msg[i].buf, msg[i].len, + msg[i + 1].buf, msg[i + 1].len) < 0) + break; + i++; + } else + if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf, + msg[i].len, NULL, 0) < 0) + break; + } + + mutex_unlock(&d->i2c_mutex); + return i; +} + +static u32 gl861_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + + +static int friio_ext_ctl(struct dvb_usb_adapter *adap, + u32 sat_color, int lnb_on) +{ + int i; + int ret; + struct i2c_msg msg; + u8 buf[2]; + u32 mask; + u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0; + + msg.addr = 0x00; + msg.flags = 0; + msg.len = 2; + msg.buf = buf; + + buf[0] = 0x00; + + /* send 2bit header (&B10) */ + buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE; + ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + buf[1] = lnb | FRIIO_CTL_STROBE; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + /* send 32bit(satur, R, G, B) data in serial */ + mask = 1 << 31; + for (i = 0; i < 32; i++) { + buf[1] = lnb | FRIIO_CTL_STROBE; + if (sat_color & mask) + buf[1] |= FRIIO_CTL_LED; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + mask >>= 1; + } + + /* set the strobe off */ + buf[1] = lnb; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + buf[1] |= FRIIO_CTL_CLK; + ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1); + + return (ret == 70); +} + + +static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff); + +/* TODO: move these init cmds to the FE's init routine? */ +static u8 streaming_init_cmds[][2] = { + {0x33, 0x08}, + {0x37, 0x40}, + {0x3A, 0x1F}, + {0x3B, 0xFF}, + {0x3C, 0x1F}, + {0x3D, 0xFF}, + {0x38, 0x00}, + {0x35, 0x00}, + {0x39, 0x00}, + {0x36, 0x00}, +}; +static int cmdlen = sizeof(streaming_init_cmds) / 2; + +/* + * Command sequence in this init function is a replay + * of the captured USB commands from the Windows proprietary driver. + */ +static int friio_initialize(struct dvb_usb_device *d) +{ + int ret; + int i; + int retry = 0; + u8 rbuf[2]; + u8 wbuf[3]; + + deb_info("%s called.\n", __func__); + + /* use gl861_i2c_msg instead of gl861_i2c_xfer(), */ + /* because the i2c device is not set up yet. */ + wbuf[0] = 0x11; + wbuf[1] = 0x02; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + msleep(2); + + wbuf[0] = 0x11; + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + msleep(1); + + /* following msgs should be in the FE's init code? */ + /* cmd sequence to identify the device type? (friio black/white) */ + wbuf[0] = 0x03; + wbuf[1] = 0x80; + /* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */ + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, + 0x1200, 0x0100, wbuf, 2, 2000); + if (ret < 0) + goto error; + + msleep(2); + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg.0x0100 */ + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2); + /* my Friio White returns 0xffff. */ + if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) + goto error; + + msleep(2); + wbuf[0] = 0x03; + wbuf[1] = 0x80; + ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0), + GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE, + 0x9000, 0x0100, wbuf, 2, 2000); + if (ret < 0) + goto error; + + msleep(2); + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg.0x0100 */ + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2); + /* my Friio White returns 0xffff again. */ + if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff) + goto error; + + msleep(1); + +restart: + /* ============ start DEMOD init cmds ================== */ + /* read PLL status to clear the POR bit */ + wbuf[0] = JDVBT90502_2ND_I2C_REG; + wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1; /* +1 for reading */ + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + msleep(5); + /* note: DEMODULATOR has 16bit register-address. */ + wbuf[0] = 0x00; + wbuf[2] = 0x01; /* reg addr: 0x0100 */ + wbuf[1] = 0x00; /* val: not used */ + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1); + if (ret < 0) + goto error; +/* + msleep(1); + wbuf[0] = 0x80; + wbuf[1] = 0x00; + ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1); + if (ret < 0) + goto error; + */ + if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */ + if (++retry > 3) { + deb_info("failed to get the correct" + " FE demod status:0x%02x\n", rbuf[0]); + goto error; + } + msleep(100); + goto restart; + } + + /* TODO: check return value in rbuf */ + /* =========== end DEMOD init cmds ===================== */ + msleep(1); + + wbuf[0] = 0x30; + wbuf[1] = 0x04; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + msleep(2); + /* following 2 cmds unnecessary? */ + wbuf[0] = 0x00; + wbuf[1] = 0x01; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + wbuf[0] = 0x06; + wbuf[1] = 0x0F; + ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0); + if (ret < 0) + goto error; + + /* some streaming ctl cmds (maybe) */ + msleep(10); + for (i = 0; i < cmdlen; i++) { + ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2, + NULL, 0); + if (ret < 0) + goto error; + msleep(1); + } + msleep(20); + + /* change the LED color etc. */ + ret = friio_streaming_ctrl(&d->adapter[0], 0); + if (ret < 0) + goto error; + + return 0; + +error: + deb_info("%s:ret == %d\n", __func__, ret); + return -EIO; +} + +/* Callbacks for DVB USB */ + +static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + + deb_info("%s called.(%d)\n", __func__, onoff); + + /* set the LED color and saturation (and LNB on) */ + if (onoff) + ret = friio_ext_ctl(adap, 0x6400ff64, 1); + else + ret = friio_ext_ctl(adap, 0x96ff00ff, 1); + + if (ret != 1) { + deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret); + return -EREMOTEIO; + } + return 0; +} + +static int friio_frontend_attach(struct dvb_usb_adapter *adap) +{ + if (friio_initialize(adap->dev) < 0) + return -EIO; + + adap->fe = jdvbt90502_attach(adap->dev); + if (adap->fe == NULL) + return -EIO; + + return 0; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_device_properties friio_properties; + +static int friio_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct dvb_usb_device *d; + struct usb_host_interface *alt; + int ret; + + if (intf->num_altsetting < GL861_ALTSETTING_COUNT) + return -ENODEV; + + alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING); + if (alt == NULL) { + deb_rc("not alt found!\n"); + return -ENODEV; + } + ret = usb_set_interface(interface_to_usbdev(intf), + alt->desc.bInterfaceNumber, + alt->desc.bAlternateSetting); + if (ret != 0) { + deb_rc("failed to set alt-setting!\n"); + return ret; + } + + ret = dvb_usb_device_init(intf, &friio_properties, + THIS_MODULE, &d, adapter_nr); + if (ret == 0) + friio_streaming_ctrl(&d->adapter[0], 1); + + return ret; +} + + +struct jdvbt90502_config friio_fe_config = { + .demod_address = FRIIO_DEMOD_ADDR, + .pll_address = FRIIO_PLL_ADDR, +}; + +static struct i2c_algorithm gl861_i2c_algo = { + .master_xfer = gl861_i2c_xfer, + .functionality = gl861_i2c_func, +}; + +static struct usb_device_id friio_table[] = { + { USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, friio_table); + + +static struct dvb_usb_device_properties friio_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = DEVICE_SPECIFIC, + + .size_of_priv = 0, + + .num_adapters = 1, + .adapter = { + /* caps:0 => no pid filter, 188B TS packet */ + /* GL861 has a HW pid filter, but no info available. */ + { + .caps = 0, + + .frontend_attach = friio_frontend_attach, + .streaming_ctrl = friio_streaming_ctrl, + + .stream = { + .type = USB_BULK, + /* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */ + .count = 8, + .endpoint = 0x01, + .u = { + /* GL861 has 6KB buf inside */ + .bulk = { + .buffersize = 16384, + } + } + }, + } + }, + .i2c_algo = &gl861_i2c_algo, + + .num_device_descs = 1, + .devices = { + { + .name = "774 Friio ISDB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &friio_table[0], NULL }, + }, + } +}; + +static struct usb_driver friio_driver = { + .name = "dvb_usb_friio", + .probe = friio_probe, + .disconnect = dvb_usb_device_exit, + .id_table = friio_table, +}; + + +/* module stuff */ +static int __init friio_module_init(void) +{ + int ret; + + ret = usb_register(&friio_driver); + if (ret) + err("usb_register failed. Error number %d", ret); + + return ret; +} + + +static void __exit friio_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&friio_driver); +} + +module_init(friio_module_init); +module_exit(friio_module_exit); + +MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>"); +MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver"); +MODULE_VERSION("0.2"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h new file mode 100644 index 00000000000..af8d55e390f --- /dev/null +++ b/drivers/media/dvb/dvb-usb/friio.h @@ -0,0 +1,99 @@ +/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver. + * + * Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp> + * + * This module is based off the the gl861 and vp702x modules. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_FRIIO_H_ +#define _DVB_USB_FRIIO_H_ + +/** + * Friio Components + * USB hub: AU4254 + * USB controller(+ TS dmx & streaming): GL861 + * Frontend: comtech JDVBT-90502 + * (tuner PLL: tua6034, I2C addr:(0xC0 >> 1)) + * (OFDM demodulator: TC90502, I2C addr:(0x30 >> 1)) + * LED x3 (+LNB) controll: PIC 16F676 + * EEPROM: 24C08 + * + * (USB smart card reader: AU9522) + * + */ + +#define DVB_USB_LOG_PREFIX "friio" +#include "dvb-usb.h" + +extern int dvb_usb_friio_debug; +#define deb_info(args...) dprintk(dvb_usb_friio_debug, 0x01, args) +#define deb_xfer(args...) dprintk(dvb_usb_friio_debug, 0x02, args) +#define deb_rc(args...) dprintk(dvb_usb_friio_debug, 0x04, args) +#define deb_fe(args...) dprintk(dvb_usb_friio_debug, 0x08, args) + +/* Vendor requests */ +#define GL861_WRITE 0x40 +#define GL861_READ 0xc0 + +/* command bytes */ +#define GL861_REQ_I2C_WRITE 0x01 +#define GL861_REQ_I2C_READ 0x02 +/* For control msg with data argument */ +/* Used for accessing the PLL on the secondary I2C bus of FE via GL861 */ +#define GL861_REQ_I2C_DATA_CTRL_WRITE 0x03 + +#define GL861_ALTSETTING_COUNT 2 +#define FRIIO_BULK_ALTSETTING 0 +#define FRIIO_ISOC_ALTSETTING 1 + +/* LED & LNB control via PIC. */ +/* basically, it's serial control with clock and strobe. */ +/* write the below 4bit control data to the reg 0x00 at the I2C addr 0x00 */ +/* when controlling the LEDs, 32bit(saturation, R, G, B) is sent on the bit3*/ +#define FRIIO_CTL_LNB (1 << 0) +#define FRIIO_CTL_STROBE (1 << 1) +#define FRIIO_CTL_CLK (1 << 2) +#define FRIIO_CTL_LED (1 << 3) + +/* Front End related */ + +#define FRIIO_DEMOD_ADDR (0x30 >> 1) +#define FRIIO_PLL_ADDR (0xC0 >> 1) + +#define JDVBT90502_PLL_CLK 4000000 +#define JDVBT90502_PLL_DIVIDER 28 + +#define JDVBT90502_2ND_I2C_REG 0xFE + +/* byte index for pll i2c command data structure*/ +/* see datasheet for tua6034 */ +#define DEMOD_REDIRECT_REG 0 +#define ADDRESS_BYTE 1 +#define DIVIDER_BYTE1 2 +#define DIVIDER_BYTE2 3 +#define CONTROL_BYTE 4 +#define BANDSWITCH_BYTE 5 +#define AGC_CTRL_BYTE 5 +#define PLL_CMD_LEN 6 + +/* bit masks for PLL STATUS response */ +#define PLL_STATUS_POR_MODE 0x80 /* 1: Power on Reset (test) Mode */ +#define PLL_STATUS_LOCKED 0x40 /* 1: locked */ +#define PLL_STATUS_AGC_ACTIVE 0x08 /* 1:active */ +#define PLL_STATUS_TESTMODE 0x07 /* digital output level (5 level) */ + /* 0.15Vcc step 0x00: < 0.15Vcc, ..., 0x04: >= 0.6Vcc (<= 1Vcc) */ + + +struct jdvbt90502_config { + u8 demod_address; /* i2c addr for demodulator IC */ + u8 pll_address; /* PLL addr on the secondary i2c*/ +}; +extern struct jdvbt90502_config friio_fe_config; + +extern struct dvb_frontend *jdvbt90502_attach(struct dvb_usb_device *d); +#endif diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c index aec7a1943b6..ef9b7bed13f 100644 --- a/drivers/media/dvb/dvb-usb/m920x.c +++ b/drivers/media/dvb/dvb-usb/m920x.c @@ -337,6 +337,8 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar int i, pass, ret = 0; buff = kmalloc(65536, GFP_KERNEL); + if (buff == NULL) + return -ENOMEM; if ((ret = m920x_read(udev, M9206_FILTER, 0x0, 0x8000, read, 4)) != 0) goto done; diff --git a/drivers/media/dvb/firewire/firedtv-ci.c b/drivers/media/dvb/firewire/firedtv-ci.c index eeb80d0ea3f..853e04b7cb3 100644 --- a/drivers/media/dvb/firewire/firedtv-ci.c +++ b/drivers/media/dvb/firewire/firedtv-ci.c @@ -215,7 +215,7 @@ static unsigned int fdtv_ca_io_poll(struct file *file, poll_table *wait) return POLLIN; } -static struct file_operations fdtv_ca_fops = { +static const struct file_operations fdtv_ca_fops = { .owner = THIS_MODULE, .ioctl = dvb_generic_ioctl, .open = dvb_generic_open, diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index b794e860b4e..d7c4837fa71 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -484,6 +484,14 @@ config DVB_S921 AN ISDB-T DQPSK, QPSK, 16QAM and 64QAM 1seg tuner module. Say Y when you want to support this frontend. +config DVB_DIB8000 + tristate "DiBcom 8000MB/MC" + depends on DVB_CORE && I2C + default m if DVB_FE_CUSTOMISE + help + A driver for DiBcom's DiB8000 ISDB-T/ISDB-Tsb demodulator. + Say Y when you want to support this frontend. + comment "Digital terrestrial only tuners/PLL" depends on DVB_CORE diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 3b49d37ab5f..3523767e7a7 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -23,6 +23,7 @@ obj-$(CONFIG_DVB_DIB3000MB) += dib3000mb.o obj-$(CONFIG_DVB_DIB3000MC) += dib3000mc.o dibx000_common.o obj-$(CONFIG_DVB_DIB7000M) += dib7000m.o dibx000_common.o obj-$(CONFIG_DVB_DIB7000P) += dib7000p.o dibx000_common.o +obj-$(CONFIG_DVB_DIB8000) += dib8000.o dibx000_common.o obj-$(CONFIG_DVB_MT312) += mt312.o obj-$(CONFIG_DVB_VES1820) += ves1820.o obj-$(CONFIG_DVB_VES1X93) += ves1x93.o diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c index 9e9a75576a1..74981ee923c 100644 --- a/drivers/media/dvb/frontends/au8522_decoder.c +++ b/drivers/media/dvb/frontends/au8522_decoder.c @@ -792,6 +792,11 @@ static int au8522_probe(struct i2c_client *client, } demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL); + if (demod_config == NULL) { + if (instance == 1) + kfree(state); + return -ENOMEM; + } demod_config->demod_address = 0x8e >> 1; state->config = demod_config; diff --git a/drivers/media/dvb/frontends/dib0070.c b/drivers/media/dvb/frontends/dib0070.c index da92cbe1b8e..2be17b93e0b 100644 --- a/drivers/media/dvb/frontends/dib0070.c +++ b/drivers/media/dvb/frontends/dib0070.c @@ -1,12 +1,29 @@ /* * Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner. * - * Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/) + * Copyright (C) 2005-9 DiBcom (http://www.dibcom.fr/) * * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation, version 2. + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * This code is more or less generated from another driver, please + * excuse some codingstyle oddities. + * */ + #include <linux/kernel.h> #include <linux/i2c.h> @@ -19,27 +36,65 @@ static int debug; module_param(debug, int, 0644); MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); -#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB0070: "); printk(args); printk("\n"); } } while (0) +#define dprintk(args...) do { \ + if (debug) { \ + printk(KERN_DEBUG "DiB0070: "); \ + printk(args); \ + printk("\n"); \ + } \ +} while (0) #define DIB0070_P1D 0x00 #define DIB0070_P1F 0x01 #define DIB0070_P1G 0x03 #define DIB0070S_P1A 0x02 +enum frontend_tune_state { + CT_TUNER_START = 10, + CT_TUNER_STEP_0, + CT_TUNER_STEP_1, + CT_TUNER_STEP_2, + CT_TUNER_STEP_3, + CT_TUNER_STEP_4, + CT_TUNER_STEP_5, + CT_TUNER_STEP_6, + CT_TUNER_STEP_7, + CT_TUNER_STOP, +}; + +#define FE_CALLBACK_TIME_NEVER 0xffffffff + struct dib0070_state { struct i2c_adapter *i2c; struct dvb_frontend *fe; const struct dib0070_config *cfg; u16 wbd_ff_offset; u8 revision; + + enum frontend_tune_state tune_state; + u32 current_rf; + + /* for the captrim binary search */ + s8 step; + u16 adc_diff; + + s8 captrim; + s8 fcaptrim; + u16 lo4; + + const struct dib0070_tuning *current_tune_table_index; + const struct dib0070_lna_match *lna_match; + + u8 wbd_gain_current; + u16 wbd_offset_3_3[2]; }; static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg) { u8 b[2]; struct i2c_msg msg[2] = { - { .addr = state->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 }, - { .addr = state->cfg->i2c_address, .flags = I2C_M_RD, .buf = b, .len = 2 }, + {.addr = state->cfg->i2c_address,.flags = 0,.buf = ®,.len = 1}, + {.addr = state->cfg->i2c_address,.flags = I2C_M_RD,.buf = b,.len = 2}, }; if (i2c_transfer(state->i2c, msg, 2) != 2) { printk(KERN_WARNING "DiB0070 I2C read failed\n"); @@ -51,7 +106,7 @@ static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg) static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val) { u8 b[3] = { reg, val >> 8, val & 0xff }; - struct i2c_msg msg = { .addr = state->cfg->i2c_address, .flags = 0, .buf = b, .len = 3 }; + struct i2c_msg msg = {.addr = state->cfg->i2c_address,.flags = 0,.buf = b,.len = 3 }; if (i2c_transfer(state->i2c, &msg, 1) != 1) { printk(KERN_WARNING "DiB0070 I2C write failed\n"); return -EREMOTEIO; @@ -59,55 +114,71 @@ static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val) return 0; } -#define HARD_RESET(state) do { if (state->cfg->reset) { state->cfg->reset(state->fe,1); msleep(10); state->cfg->reset(state->fe,0); msleep(10); } } while (0) +#define HARD_RESET(state) do { \ + state->cfg->sleep(state->fe, 0); \ + if (state->cfg->reset) { \ + state->cfg->reset(state->fe,1); msleep(10); \ + state->cfg->reset(state->fe,0); msleep(10); \ + } \ +} while (0) static int dib0070_set_bandwidth(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch) { - struct dib0070_state *st = fe->tuner_priv; - u16 tmp = 0; - tmp = dib0070_read_reg(st, 0x02) & 0x3fff; + struct dib0070_state *state = fe->tuner_priv; + u16 tmp = dib0070_read_reg(state, 0x02) & 0x3fff; + + if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 7000) + tmp |= (0 << 14); + else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 6000) + tmp |= (1 << 14); + else if (state->fe->dtv_property_cache.bandwidth_hz / 1000 > 5000) + tmp |= (2 << 14); + else + tmp |= (3 << 14); - switch(BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth)) { - case 8000: - tmp |= (0 << 14); - break; - case 7000: - tmp |= (1 << 14); - break; - case 6000: - tmp |= (2 << 14); - break; - case 5000: - default: - tmp |= (3 << 14); - break; + dib0070_write_reg(state, 0x02, tmp); + + /* sharpen the BB filter in ISDB-T to have higher immunity to adjacent channels */ + if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT) { + u16 value = dib0070_read_reg(state, 0x17); + + dib0070_write_reg(state, 0x17, value & 0xfffc); + tmp = dib0070_read_reg(state, 0x01) & 0x01ff; + dib0070_write_reg(state, 0x01, tmp | (60 << 9)); + + dib0070_write_reg(state, 0x17, value); } - dib0070_write_reg(st, 0x02, tmp); return 0; } -static void dib0070_captrim(struct dib0070_state *st, u16 LO4) +static int dib0070_captrim(struct dib0070_state *state, enum frontend_tune_state *tune_state) { - int8_t captrim, fcaptrim, step_sign, step; - u16 adc, adc_diff = 3000; + int8_t step_sign; + u16 adc; + int ret = 0; + if (*tune_state == CT_TUNER_STEP_0) { + dib0070_write_reg(state, 0x0f, 0xed10); + dib0070_write_reg(state, 0x17, 0x0034); - dib0070_write_reg(st, 0x0f, 0xed10); - dib0070_write_reg(st, 0x17, 0x0034); + dib0070_write_reg(state, 0x18, 0x0032); + state->step = state->captrim = state->fcaptrim = 64; + state->adc_diff = 3000; + ret = 20; - dib0070_write_reg(st, 0x18, 0x0032); - msleep(2); + *tune_state = CT_TUNER_STEP_1; + } else if (*tune_state == CT_TUNER_STEP_1) { + state->step /= 2; + dib0070_write_reg(state, 0x14, state->lo4 | state->captrim); + ret = 15; - step = captrim = fcaptrim = 64; + *tune_state = CT_TUNER_STEP_2; + } else if (*tune_state == CT_TUNER_STEP_2) { - do { - step /= 2; - dib0070_write_reg(st, 0x14, LO4 | captrim); - msleep(1); - adc = dib0070_read_reg(st, 0x19); + adc = dib0070_read_reg(state, 0x19); - dprintk( "CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", captrim, adc, (u32) adc*(u32)1800/(u32)1024); + dprintk("CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", state->captrim, adc, (u32) adc * (u32) 1800 / (u32) 1024); if (adc >= 400) { adc -= 400; @@ -117,379 +188,430 @@ static void dib0070_captrim(struct dib0070_state *st, u16 LO4) step_sign = 1; } - if (adc < adc_diff) { - dprintk( "CAPTRIM=%hd is closer to target (%hd/%hd)", captrim, adc, adc_diff); - adc_diff = adc; - fcaptrim = captrim; + if (adc < state->adc_diff) { + dprintk("CAPTRIM=%hd is closer to target (%hd/%hd)", state->captrim, adc, state->adc_diff); + state->adc_diff = adc; + state->fcaptrim = state->captrim; + } + state->captrim += (step_sign * state->step); + if (state->step >= 1) + *tune_state = CT_TUNER_STEP_1; + else + *tune_state = CT_TUNER_STEP_3; - } - captrim += (step_sign * step); - } while (step >= 1); + } else if (*tune_state == CT_TUNER_STEP_3) { + dib0070_write_reg(state, 0x14, state->lo4 | state->fcaptrim); + dib0070_write_reg(state, 0x18, 0x07ff); + *tune_state = CT_TUNER_STEP_4; + } - dib0070_write_reg(st, 0x14, LO4 | fcaptrim); - dib0070_write_reg(st, 0x18, 0x07ff); + return ret; } -#define LPF 100 // define for the loop filter 100kHz by default 16-07-06 -#define LO4_SET_VCO_HFDIV(l, v, h) l |= ((v) << 11) | ((h) << 7) -#define LO4_SET_SD(l, s) l |= ((s) << 14) | ((s) << 12) -#define LO4_SET_CTRIM(l, c) l |= (c) << 10 -static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch) +static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt) { - struct dib0070_state *st = fe->tuner_priv; - u32 freq = ch->frequency/1000 + (BAND_OF_FREQUENCY(ch->frequency/1000) == BAND_VHF ? st->cfg->freq_offset_khz_vhf : st->cfg->freq_offset_khz_uhf); - - u8 band = BAND_OF_FREQUENCY(freq), c; + struct dib0070_state *state = fe->tuner_priv; + u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0); + dprintk("CTRL_LO5: 0x%x", lo5); + return dib0070_write_reg(state, 0x15, lo5); +} - /*******************VCO***********************************/ - u16 lo4 = 0; +void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open) +{ + struct dib0070_state *state = fe->tuner_priv; - u8 REFDIV, PRESC = 2; - u32 FBDiv, Rest, FREF, VCOF_kHz; - u16 Num, Den; - /*******************FrontEnd******************************/ - u16 value = 0; + if (open) { + dib0070_write_reg(state, 0x1b, 0xff00); + dib0070_write_reg(state, 0x1a, 0x0000); + } else { + dib0070_write_reg(state, 0x1b, 0x4112); + if (state->cfg->vga_filter != 0) { + dib0070_write_reg(state, 0x1a, state->cfg->vga_filter); + dprintk("vga filter register is set to %x", state->cfg->vga_filter); + } else + dib0070_write_reg(state, 0x1a, 0x0009); + } +} - dprintk( "Tuning for Band: %hd (%d kHz)", band, freq); +EXPORT_SYMBOL(dib0070_ctrl_agc_filter); +struct dib0070_tuning { + u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ + u8 switch_trim; + u8 vco_band; + u8 hfdiv; + u8 vco_multi; + u8 presc; + u8 wbdmux; + u16 tuner_enable; +}; +struct dib0070_lna_match { + u32 max_freq; /* for every frequency less than or equal to that field: this information is correct */ + u8 lna_band; +}; - dib0070_write_reg(st, 0x17, 0x30); +static const struct dib0070_tuning dib0070s_tuning_table[] = { + {570000, 2, 1, 3, 6, 6, 2, 0x4000 | 0x0800}, /* UHF */ + {700000, 2, 0, 2, 4, 2, 2, 0x4000 | 0x0800}, + {863999, 2, 1, 2, 4, 2, 2, 0x4000 | 0x0800}, + {1500000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400}, /* LBAND */ + {1600000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400}, + {2000000, 0, 1, 1, 2, 2, 4, 0x2000 | 0x0400}, + {0xffffffff, 0, 0, 8, 1, 2, 1, 0x8000 | 0x1000}, /* SBAND */ +}; - dib0070_set_bandwidth(fe, ch); /* c is used as HF */ - switch (st->revision) { - case DIB0070S_P1A: - switch (band) { - case BAND_LBAND: - LO4_SET_VCO_HFDIV(lo4, 1, 1); - c = 2; - break; - case BAND_SBAND: - LO4_SET_VCO_HFDIV(lo4, 0, 0); - LO4_SET_CTRIM(lo4, 1); - c = 1; - break; - case BAND_UHF: - default: - if (freq < 570000) { - LO4_SET_VCO_HFDIV(lo4, 1, 3); - PRESC = 6; c = 6; - } else if (freq < 680000) { - LO4_SET_VCO_HFDIV(lo4, 0, 2); - c = 4; - } else { - LO4_SET_VCO_HFDIV(lo4, 1, 2); - c = 4; - } - break; - } break; - - case DIB0070_P1G: - case DIB0070_P1F: - default: - switch (band) { - case BAND_FM: - LO4_SET_VCO_HFDIV(lo4, 0, 7); - c = 24; - break; - case BAND_LBAND: - LO4_SET_VCO_HFDIV(lo4, 1, 0); - c = 2; - break; - case BAND_VHF: - if (freq < 180000) { - LO4_SET_VCO_HFDIV(lo4, 0, 3); - c = 16; - } else if (freq < 190000) { - LO4_SET_VCO_HFDIV(lo4, 1, 3); - c = 16; - } else { - LO4_SET_VCO_HFDIV(lo4, 0, 6); - c = 12; - } - break; - - case BAND_UHF: - default: - if (freq < 570000) { - LO4_SET_VCO_HFDIV(lo4, 1, 5); - c = 6; - } else if (freq < 700000) { - LO4_SET_VCO_HFDIV(lo4, 0, 1); - c = 4; - } else { - LO4_SET_VCO_HFDIV(lo4, 1, 1); - c = 4; - } - break; - } - break; - } +static const struct dib0070_tuning dib0070_tuning_table[] = { + {115000, 1, 0, 7, 24, 2, 1, 0x8000 | 0x1000}, /* FM below 92MHz cannot be tuned */ + {179500, 1, 0, 3, 16, 2, 1, 0x8000 | 0x1000}, /* VHF */ + {189999, 1, 1, 3, 16, 2, 1, 0x8000 | 0x1000}, + {250000, 1, 0, 6, 12, 2, 1, 0x8000 | 0x1000}, + {569999, 2, 1, 5, 6, 2, 2, 0x4000 | 0x0800}, /* UHF */ + {699999, 2, 0, 1, 4, 2, 2, 0x4000 | 0x0800}, + {863999, 2, 1, 1, 4, 2, 2, 0x4000 | 0x0800}, + {0xffffffff, 0, 1, 0, 2, 2, 4, 0x2000 | 0x0400}, /* LBAND or everything higher than UHF */ +}; - dprintk( "HFDIV code: %hd", (lo4 >> 7) & 0xf); - dprintk( "VCO = %hd", (lo4 >> 11) & 0x3); +static const struct dib0070_lna_match dib0070_lna_flip_chip[] = { + {180000, 0}, /* VHF */ + {188000, 1}, + {196400, 2}, + {250000, 3}, + {550000, 0}, /* UHF */ + {590000, 1}, + {666000, 3}, + {864000, 5}, + {1500000, 0}, /* LBAND or everything higher than UHF */ + {1600000, 1}, + {2000000, 3}, + {0xffffffff, 7}, +}; +static const struct dib0070_lna_match dib0070_lna[] = { + {180000, 0}, /* VHF */ + {188000, 1}, + {196400, 2}, + {250000, 3}, + {550000, 2}, /* UHF */ + {650000, 3}, + {750000, 5}, + {850000, 6}, + {864000, 7}, + {1500000, 0}, /* LBAND or everything higher than UHF */ + {1600000, 1}, + {2000000, 3}, + {0xffffffff, 7}, +}; - VCOF_kHz = (c * freq) * 2; - dprintk( "VCOF in kHz: %d ((%hd*%d) << 1))",VCOF_kHz, c, freq); +#define LPF 100 // define for the loop filter 100kHz by default 16-07-06 +static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch) +{ + struct dib0070_state *state = fe->tuner_priv; - switch (band) { - case BAND_VHF: - REFDIV = (u8) ((st->cfg->clock_khz + 9999) / 10000); - break; - case BAND_FM: - REFDIV = (u8) ((st->cfg->clock_khz) / 1000); - break; - default: - REFDIV = (u8) ( st->cfg->clock_khz / 10000); - break; - } - FREF = st->cfg->clock_khz / REFDIV; + const struct dib0070_tuning *tune; + const struct dib0070_lna_match *lna_match; - dprintk( "REFDIV: %hd, FREF: %d", REFDIV, FREF); + enum frontend_tune_state *tune_state = &state->tune_state; + int ret = 10; /* 1ms is the default delay most of the time */ + u8 band = (u8) BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000); + u32 freq = fe->dtv_property_cache.frequency / 1000 + (band == BAND_VHF ? state->cfg->freq_offset_khz_vhf : state->cfg->freq_offset_khz_uhf); +#ifdef CONFIG_SYS_ISDBT + if (state->fe->dtv_property_cache.delivery_system == SYS_ISDBT && state->fe->dtv_property_cache.isdbt_sb_mode == 1) + if (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) + && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1))) + || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0) + && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == (state->fe->dtv_property_cache.isdbt_sb_segment_count / 2))) + || (((state->fe->dtv_property_cache.isdbt_sb_segment_count % 2) == 0) + && (state->fe->dtv_property_cache.isdbt_sb_segment_idx == ((state->fe->dtv_property_cache.isdbt_sb_segment_count / 2) + 1)))) + freq += 850; +#endif + if (state->current_rf != freq) { - switch (st->revision) { + switch (state->revision) { case DIB0070S_P1A: - FBDiv = (VCOF_kHz / PRESC / FREF); - Rest = (VCOF_kHz / PRESC) - FBDiv * FREF; + tune = dib0070s_tuning_table; + lna_match = dib0070_lna; break; - - case DIB0070_P1G: - case DIB0070_P1F: default: - FBDiv = (freq / (FREF / 2)); - Rest = 2 * freq - FBDiv * FREF; + tune = dib0070_tuning_table; + if (state->cfg->flip_chip) + lna_match = dib0070_lna_flip_chip; + else + lna_match = dib0070_lna; break; - } - - - if (Rest < LPF) Rest = 0; - else if (Rest < 2 * LPF) Rest = 2 * LPF; - else if (Rest > (FREF - LPF)) { Rest = 0 ; FBDiv += 1; } - else if (Rest > (FREF - 2 * LPF)) Rest = FREF - 2 * LPF; - Rest = (Rest * 6528) / (FREF / 10); - dprintk( "FBDIV: %d, Rest: %d", FBDiv, Rest); - - Num = 0; - Den = 1; + } + while (freq > tune->max_freq) /* find the right one */ + tune++; + while (freq > lna_match->max_freq) /* find the right one */ + lna_match++; - if (Rest > 0) { - LO4_SET_SD(lo4, 1); - Den = 255; - Num = (u16)Rest; + state->current_tune_table_index = tune; + state->lna_match = lna_match; } - dprintk( "Num: %hd, Den: %hd, SD: %hd",Num, Den, (lo4 >> 12) & 0x1); + if (*tune_state == CT_TUNER_START) { + dprintk("Tuning for Band: %hd (%d kHz)", band, freq); + if (state->current_rf != freq) { + u8 REFDIV; + u32 FBDiv, Rest, FREF, VCOF_kHz; + u8 Den; + state->current_rf = freq; + state->lo4 = (state->current_tune_table_index->vco_band << 11) | (state->current_tune_table_index->hfdiv << 7); - dib0070_write_reg(st, 0x11, (u16)FBDiv); + dib0070_write_reg(state, 0x17, 0x30); + VCOF_kHz = state->current_tune_table_index->vco_multi * freq * 2; - dib0070_write_reg(st, 0x12, (Den << 8) | REFDIV); - + switch (band) { + case BAND_VHF: + REFDIV = (u8) ((state->cfg->clock_khz + 9999) / 10000); + break; + case BAND_FM: + REFDIV = (u8) ((state->cfg->clock_khz) / 1000); + break; + default: + REFDIV = (u8) (state->cfg->clock_khz / 10000); + break; + } + FREF = state->cfg->clock_khz / REFDIV; + + switch (state->revision) { + case DIB0070S_P1A: + FBDiv = (VCOF_kHz / state->current_tune_table_index->presc / FREF); + Rest = (VCOF_kHz / state->current_tune_table_index->presc) - FBDiv * FREF; + break; + + case DIB0070_P1G: + case DIB0070_P1F: + default: + FBDiv = (freq / (FREF / 2)); + Rest = 2 * freq - FBDiv * FREF; + break; + } - dib0070_write_reg(st, 0x13, Num); + if (Rest < LPF) + Rest = 0; + else if (Rest < 2 * LPF) + Rest = 2 * LPF; + else if (Rest > (FREF - LPF)) { + Rest = 0; + FBDiv += 1; + } else if (Rest > (FREF - 2 * LPF)) + Rest = FREF - 2 * LPF; + Rest = (Rest * 6528) / (FREF / 10); + + Den = 1; + if (Rest > 0) { + state->lo4 |= (1 << 14) | (1 << 12); + Den = 255; + } + dib0070_write_reg(state, 0x11, (u16) FBDiv); + dib0070_write_reg(state, 0x12, (Den << 8) | REFDIV); + dib0070_write_reg(state, 0x13, (u16) Rest); - value = 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001; + if (state->revision == DIB0070S_P1A) { - switch (band) { - case BAND_UHF: value |= 0x4000 | 0x0800; break; - case BAND_LBAND: value |= 0x2000 | 0x0400; break; - default: value |= 0x8000 | 0x1000; break; - } - dib0070_write_reg(st, 0x20, value); + if (band == BAND_SBAND) { + dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0); + dib0070_write_reg(state, 0x1d, 0xFFFF); + } else + dib0070_set_ctrl_lo5(fe, 5, 4, 3, 1); + } - dib0070_captrim(st, lo4); - if (st->revision == DIB0070S_P1A) { - if (band == BAND_SBAND) - dib0070_write_reg(st, 0x15, 0x16e2); - else - dib0070_write_reg(st, 0x15, 0x56e5); - } + dib0070_write_reg(state, 0x20, + 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001 | state->current_tune_table_index->tuner_enable); + dprintk("REFDIV: %hd, FREF: %d", REFDIV, FREF); + dprintk("FBDIV: %d, Rest: %d", FBDiv, Rest); + dprintk("Num: %hd, Den: %hd, SD: %hd", (u16) Rest, Den, (state->lo4 >> 12) & 0x1); + dprintk("HFDIV code: %hd", state->current_tune_table_index->hfdiv); + dprintk("VCO = %hd", state->current_tune_table_index->vco_band); + dprintk("VCOF: ((%hd*%d) << 1))", state->current_tune_table_index->vco_multi, freq); + *tune_state = CT_TUNER_STEP_0; + } else { /* we are already tuned to this frequency - the configuration is correct */ + ret = 50; /* wakeup time */ + *tune_state = CT_TUNER_STEP_5; + } + } else if ((*tune_state > CT_TUNER_START) && (*tune_state < CT_TUNER_STEP_4)) { + + ret = dib0070_captrim(state, tune_state); + + } else if (*tune_state == CT_TUNER_STEP_4) { + const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain; + if (tmp != NULL) { + while (freq / 1000 > tmp->freq) /* find the right one */ + tmp++; + dib0070_write_reg(state, 0x0f, + (0 << 15) | (1 << 14) | (3 << 12) | (tmp->wbd_gain_val << 9) | (0 << 8) | (1 << 7) | (state-> + current_tune_table_index-> + wbdmux << 0)); + state->wbd_gain_current = tmp->wbd_gain_val; + } else { + dib0070_write_reg(state, 0x0f, + (0 << 15) | (1 << 14) | (3 << 12) | (6 << 9) | (0 << 8) | (1 << 7) | (state->current_tune_table_index-> + wbdmux << 0)); + state->wbd_gain_current = 6; + } - switch (band) { - case BAND_UHF: value = 0x7c82; break; - case BAND_LBAND: value = 0x7c84; break; - default: value = 0x7c81; break; - } - dib0070_write_reg(st, 0x0f, value); - dib0070_write_reg(st, 0x06, 0x3fff); - - /* Front End */ - /* c == TUNE, value = SWITCH */ - c = 0; - value = 0; - switch (band) { - case BAND_FM: - c = 0; value = 1; - break; - - case BAND_VHF: - if (freq <= 180000) c = 0; - else if (freq <= 188200) c = 1; - else if (freq <= 196400) c = 2; - else c = 3; - value = 1; - break; - - case BAND_LBAND: - if (freq <= 1500000) c = 0; - else if (freq <= 1600000) c = 1; - else c = 3; - break; - - case BAND_SBAND: - c = 7; - dib0070_write_reg(st, 0x1d,0xFFFF); - break; - - case BAND_UHF: - default: - if (st->cfg->flip_chip) { - if (freq <= 550000) c = 0; - else if (freq <= 590000) c = 1; - else if (freq <= 666000) c = 3; - else c = 5; - } else { - if (freq <= 550000) c = 2; - else if (freq <= 650000) c = 3; - else if (freq <= 750000) c = 5; - else if (freq <= 850000) c = 6; - else c = 7; - } - value = 2; - break; + dib0070_write_reg(state, 0x06, 0x3fff); + dib0070_write_reg(state, 0x07, + (state->current_tune_table_index->switch_trim << 11) | (7 << 8) | (state->lna_match->lna_band << 3) | (3 << 0)); + dib0070_write_reg(state, 0x08, (state->lna_match->lna_band << 10) | (3 << 7) | (127)); + dib0070_write_reg(state, 0x0d, 0x0d80); + + dib0070_write_reg(state, 0x18, 0x07ff); + dib0070_write_reg(state, 0x17, 0x0033); + + *tune_state = CT_TUNER_STEP_5; + } else if (*tune_state == CT_TUNER_STEP_5) { + dib0070_set_bandwidth(fe, ch); + *tune_state = CT_TUNER_STOP; + } else { + ret = FE_CALLBACK_TIME_NEVER; /* tuner finished, time to call again infinite */ } + return ret; +} - /* default: LNA_MATCH=7, BIAS=3 */ - dib0070_write_reg(st, 0x07, (value << 11) | (7 << 8) | (c << 3) | (3 << 0)); - dib0070_write_reg(st, 0x08, (c << 10) | (3 << 7) | (127)); - dib0070_write_reg(st, 0x0d, 0x0d80); +static int dib0070_tune(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) +{ + struct dib0070_state *state = fe->tuner_priv; + uint32_t ret; + state->tune_state = CT_TUNER_START; - dib0070_write_reg(st, 0x18, 0x07ff); - dib0070_write_reg(st, 0x17, 0x0033); + do { + ret = dib0070_tune_digital(fe, p); + if (ret != FE_CALLBACK_TIME_NEVER) + msleep(ret / 10); + else + break; + } while (state->tune_state != CT_TUNER_STOP); return 0; } static int dib0070_wakeup(struct dvb_frontend *fe) { - struct dib0070_state *st = fe->tuner_priv; - if (st->cfg->sleep) - st->cfg->sleep(fe, 0); + struct dib0070_state *state = fe->tuner_priv; + if (state->cfg->sleep) + state->cfg->sleep(fe, 0); return 0; } static int dib0070_sleep(struct dvb_frontend *fe) { - struct dib0070_state *st = fe->tuner_priv; - if (st->cfg->sleep) - st->cfg->sleep(fe, 1); + struct dib0070_state *state = fe->tuner_priv; + if (state->cfg->sleep) + state->cfg->sleep(fe, 1); return 0; } -static u16 dib0070_p1f_defaults[] = - -{ +static const u16 dib0070_p1f_defaults[] = { 7, 0x02, - 0x0008, - 0x0000, - 0x0000, - 0x0000, - 0x0000, - 0x0002, - 0x0100, + 0x0008, + 0x0000, + 0x0000, + 0x0000, + 0x0000, + 0x0002, + 0x0100, 3, 0x0d, - 0x0d80, - 0x0001, - 0x0000, + 0x0d80, + 0x0001, + 0x0000, 4, 0x11, - 0x0000, - 0x0103, - 0x0000, - 0x0000, + 0x0000, + 0x0103, + 0x0000, + 0x0000, 3, 0x16, - 0x0004 | 0x0040, - 0x0030, - 0x07ff, + 0x0004 | 0x0040, + 0x0030, + 0x07ff, 6, 0x1b, - 0x4112, - 0xff00, - 0xc07f, - 0x0000, - 0x0180, - 0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001, + 0x4112, + 0xff00, + 0xc07f, + 0x0000, + 0x0180, + 0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001, 0, }; -static void dib0070_wbd_calibration(struct dvb_frontend *fe) +static u16 dib0070_read_wbd_offset(struct dib0070_state *state, u8 gain) { - u16 wbd_offs; - struct dib0070_state *state = fe->tuner_priv; - - if (state->cfg->sleep) - state->cfg->sleep(fe, 0); + u16 tuner_en = dib0070_read_reg(state, 0x20); + u16 offset; - dib0070_write_reg(state, 0x0f, 0x6d81); - dib0070_write_reg(state, 0x20, 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001); + dib0070_write_reg(state, 0x18, 0x07ff); + dib0070_write_reg(state, 0x20, 0x0800 | 0x4000 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001); + dib0070_write_reg(state, 0x0f, (1 << 14) | (2 << 12) | (gain << 9) | (1 << 8) | (1 << 7) | (0 << 0)); msleep(9); - wbd_offs = dib0070_read_reg(state, 0x19); - dib0070_write_reg(state, 0x20, 0); - state->wbd_ff_offset = ((wbd_offs * 8 * 18 / 33 + 1) / 2); - dprintk( "WBDStart = %d (Vargen) - FF = %hd", (u32) wbd_offs * 1800/1024, state->wbd_ff_offset); - - if (state->cfg->sleep) - state->cfg->sleep(fe, 1); - + offset = dib0070_read_reg(state, 0x19); + dib0070_write_reg(state, 0x20, tuner_en); + return offset; } -u16 dib0070_wbd_offset(struct dvb_frontend *fe) +static void dib0070_wbd_offset_calibration(struct dib0070_state *state) { - struct dib0070_state *st = fe->tuner_priv; - return st->wbd_ff_offset; + u8 gain; + for (gain = 6; gain < 8; gain++) { + state->wbd_offset_3_3[gain - 6] = ((dib0070_read_wbd_offset(state, gain) * 8 * 18 / 33 + 1) / 2); + dprintk("Gain: %d, WBDOffset (3.3V) = %hd", gain, state->wbd_offset_3_3[gain - 6]); + } } -EXPORT_SYMBOL(dib0070_wbd_offset); -static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt) +u16 dib0070_wbd_offset(struct dvb_frontend *fe) { struct dib0070_state *state = fe->tuner_priv; - u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0); - dprintk( "CTRL_LO5: 0x%x", lo5); - return dib0070_write_reg(state, 0x15, lo5); + const struct dib0070_wbd_gain_cfg *tmp = state->cfg->wbd_gain; + u32 freq = fe->dtv_property_cache.frequency / 1000; + + if (tmp != NULL) { + while (freq / 1000 > tmp->freq) /* find the right one */ + tmp++; + state->wbd_gain_current = tmp->wbd_gain_val; + } else + state->wbd_gain_current = 6; + + return state->wbd_offset_3_3[state->wbd_gain_current - 6]; } +EXPORT_SYMBOL(dib0070_wbd_offset); + #define pgm_read_word(w) (*w) -static int dib0070_reset(struct dib0070_state *state) +static int dib0070_reset(struct dvb_frontend *fe) { + struct dib0070_state *state = fe->tuner_priv; u16 l, r, *n; HARD_RESET(state); - #ifndef FORCE_SBAND_TUNER if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1) state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff; else +#else +#warning forcing SBAND #endif - state->revision = DIB0070S_P1A; + state->revision = DIB0070S_P1A; /* P1F or not */ - dprintk( "Revision: %x", state->revision); + dprintk("Revision: %x", state->revision); if (state->revision == DIB0070_P1D) { - dprintk( "Error: this driver is not to be used meant for P1D or earlier"); + dprintk("Error: this driver is not to be used meant for P1D or earlier"); return -EINVAL; } @@ -498,7 +620,7 @@ static int dib0070_reset(struct dib0070_state *state) while (l) { r = pgm_read_word(n++); do { - dib0070_write_reg(state, (u8)r, pgm_read_word(n++)); + dib0070_write_reg(state, (u8) r, pgm_read_word(n++)); r++; } while (--l); l = pgm_read_word(n++); @@ -514,24 +636,25 @@ static int dib0070_reset(struct dib0070_state *state) r |= state->cfg->osc_buffer_state << 3; dib0070_write_reg(state, 0x10, r); - dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 4)); + dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 5)); if (state->cfg->invert_iq) { r = dib0070_read_reg(state, 0x02) & 0xffdf; dib0070_write_reg(state, 0x02, r | (1 << 5)); } - if (state->revision == DIB0070S_P1A) - dib0070_set_ctrl_lo5(state->fe, 4, 7, 3, 1); + dib0070_set_ctrl_lo5(fe, 2, 4, 3, 0); else - dib0070_set_ctrl_lo5(state->fe, 4, 4, 2, 0); + dib0070_set_ctrl_lo5(fe, 5, 4, state->cfg->charge_pump, state->cfg->enable_third_order_filter); dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8); + + dib0070_wbd_offset_calibration(state); + return 0; } - static int dib0070_release(struct dvb_frontend *fe) { kfree(fe->tuner_priv); @@ -539,23 +662,24 @@ static int dib0070_release(struct dvb_frontend *fe) return 0; } -static struct dvb_tuner_ops dib0070_ops = { +static const struct dvb_tuner_ops dib0070_ops = { .info = { - .name = "DiBcom DiB0070", - .frequency_min = 45000000, - .frequency_max = 860000000, - .frequency_step = 1000, - }, - .release = dib0070_release, - - .init = dib0070_wakeup, - .sleep = dib0070_sleep, - .set_params = dib0070_tune_digital, -// .get_frequency = dib0070_get_frequency, -// .get_bandwidth = dib0070_get_bandwidth + .name = "DiBcom DiB0070", + .frequency_min = 45000000, + .frequency_max = 860000000, + .frequency_step = 1000, + }, + .release = dib0070_release, + + .init = dib0070_wakeup, + .sleep = dib0070_sleep, + .set_params = dib0070_tune, + +// .get_frequency = dib0070_get_frequency, +// .get_bandwidth = dib0070_get_bandwidth }; -struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) +struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) { struct dib0070_state *state = kzalloc(sizeof(struct dib0070_state), GFP_KERNEL); if (state == NULL) @@ -563,25 +687,24 @@ struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter state->cfg = cfg; state->i2c = i2c; - state->fe = fe; + state->fe = fe; fe->tuner_priv = state; - if (dib0070_reset(state) != 0) + if (dib0070_reset(fe) != 0) goto free_mem; - dib0070_wbd_calibration(fe); - printk(KERN_INFO "DiB0070: successfully identified\n"); memcpy(&fe->ops.tuner_ops, &dib0070_ops, sizeof(struct dvb_tuner_ops)); fe->tuner_priv = state; return fe; -free_mem: + free_mem: kfree(state); fe->tuner_priv = NULL; return NULL; } + EXPORT_SYMBOL(dib0070_attach); MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>"); diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index 9670f5d20cf..8a2e1e710ad 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -15,6 +15,11 @@ struct i2c_adapter; #define DEFAULT_DIB0070_I2C_ADDRESS 0x60 +struct dib0070_wbd_gain_cfg { + u16 freq; + u16 wbd_gain_val; +}; + struct dib0070_config { u8 i2c_address; @@ -26,26 +31,28 @@ struct dib0070_config { int freq_offset_khz_uhf; int freq_offset_khz_vhf; - u8 osc_buffer_state; /* 0= normal, 1= tri-state */ - u32 clock_khz; - u8 clock_pad_drive; /* (Drive + 1) * 2mA */ + u8 osc_buffer_state; /* 0= normal, 1= tri-state */ + u32 clock_khz; + u8 clock_pad_drive; /* (Drive + 1) * 2mA */ - u8 invert_iq; /* invert Q - in case I or Q is inverted on the board */ + u8 invert_iq; /* invert Q - in case I or Q is inverted on the board */ - u8 force_crystal_mode; /* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */ + u8 force_crystal_mode; /* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */ u8 flip_chip; + u8 enable_third_order_filter; + u8 charge_pump; + + const struct dib0070_wbd_gain_cfg *wbd_gain; + + u8 vga_filter; }; #if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE)) -extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct dib0070_config *cfg); +extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); extern u16 dib0070_wbd_offset(struct dvb_frontend *); #else -static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, - struct i2c_adapter *i2c, - struct dib0070_config *cfg) +static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return NULL; @@ -57,5 +64,6 @@ static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe) return -ENODEV; } #endif +extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); #endif diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index fc96fbf03d6..55ef6eeb076 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/i2c.h> +#include "dvb_math.h" #include "dvb_frontend.h" #include "dib7000p.h" @@ -1217,7 +1218,37 @@ static int dib7000p_read_signal_strength(struct dvb_frontend *fe, u16 *strength) static int dib7000p_read_snr(struct dvb_frontend* fe, u16 *snr) { - *snr = 0x0000; + struct dib7000p_state *state = fe->demodulator_priv; + u16 val; + s32 signal_mant, signal_exp, noise_mant, noise_exp; + u32 result = 0; + + val = dib7000p_read_word(state, 479); + noise_mant = (val >> 4) & 0xff; + noise_exp = ((val & 0xf) << 2); + val = dib7000p_read_word(state, 480); + noise_exp += ((val >> 14) & 0x3); + if ((noise_exp & 0x20) != 0) + noise_exp -= 0x40; + + signal_mant = (val >> 6) & 0xFF; + signal_exp = (val & 0x3F); + if ((signal_exp & 0x20) != 0) + signal_exp -= 0x40; + + if (signal_mant != 0) + result = intlog10(2) * 10 * signal_exp + 10 * + intlog10(signal_mant); + else + result = intlog10(2) * 10 * signal_exp - 100; + + if (noise_mant != 0) + result -= intlog10(2) * 10 * noise_exp + 10 * + intlog10(noise_mant); + else + result -= intlog10(2) * 10 * noise_exp - 100; + + *snr = result / ((1 << 24) / 10); return 0; } diff --git a/drivers/media/dvb/frontends/dib8000.c b/drivers/media/dvb/frontends/dib8000.c new file mode 100644 index 00000000000..852c790d09d --- /dev/null +++ b/drivers/media/dvb/frontends/dib8000.c @@ -0,0 +1,2277 @@ +/* + * Linux-DVB Driver for DiBcom's DiB8000 chip (ISDB-T). + * + * Copyright (C) 2009 DiBcom (http://www.dibcom.fr/) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation, version 2. + */ +#include <linux/kernel.h> +#include <linux/i2c.h> +#include "dvb_math.h" + +#include "dvb_frontend.h" + +#include "dib8000.h" + +#define LAYER_ALL -1 +#define LAYER_A 1 +#define LAYER_B 2 +#define LAYER_C 3 + +#define FE_CALLBACK_TIME_NEVER 0xffffffff + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "turn on debugging (default: 0)"); + +#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB8000: "); printk(args); printk("\n"); } } while (0) + +enum frontend_tune_state { + CT_AGC_START = 20, + CT_AGC_STEP_0, + CT_AGC_STEP_1, + CT_AGC_STEP_2, + CT_AGC_STEP_3, + CT_AGC_STEP_4, + CT_AGC_STOP, + + CT_DEMOD_START = 30, +}; + +#define FE_STATUS_TUNE_FAILED 0 + +struct i2c_device { + struct i2c_adapter *adap; + u8 addr; +}; + +struct dib8000_state { + struct dvb_frontend fe; + struct dib8000_config cfg; + + struct i2c_device i2c; + + struct dibx000_i2c_master i2c_master; + + u16 wbd_ref; + + u8 current_band; + u32 current_bandwidth; + struct dibx000_agc_config *current_agc; + u32 timf; + u32 timf_default; + + u8 div_force_off:1; + u8 div_state:1; + u16 div_sync_wait; + + u8 agc_state; + u8 differential_constellation; + u8 diversity_onoff; + + s16 ber_monitored_layer; + u16 gpio_dir; + u16 gpio_val; + + u16 revision; + u8 isdbt_cfg_loaded; + enum frontend_tune_state tune_state; + u32 status; +}; + +enum dib8000_power_mode { + DIB8000M_POWER_ALL = 0, + DIB8000M_POWER_INTERFACE_ONLY, +}; + +static u16 dib8000_i2c_read16(struct i2c_device *i2c, u16 reg) +{ + u8 wb[2] = { reg >> 8, reg & 0xff }; + u8 rb[2]; + struct i2c_msg msg[2] = { + {.addr = i2c->addr >> 1,.flags = 0,.buf = wb,.len = 2}, + {.addr = i2c->addr >> 1,.flags = I2C_M_RD,.buf = rb,.len = 2}, + }; + + if (i2c_transfer(i2c->adap, msg, 2) != 2) + dprintk("i2c read error on %d", reg); + + return (rb[0] << 8) | rb[1]; +} + +static u16 dib8000_read_word(struct dib8000_state *state, u16 reg) +{ + return dib8000_i2c_read16(&state->i2c, reg); +} + +static u32 dib8000_read32(struct dib8000_state *state, u16 reg) +{ + u16 rw[2]; + + rw[0] = dib8000_read_word(state, reg + 0); + rw[1] = dib8000_read_word(state, reg + 1); + + return ((rw[0] << 16) | (rw[1])); +} + +static int dib8000_i2c_write16(struct i2c_device *i2c, u16 reg, u16 val) +{ + u8 b[4] = { + (reg >> 8) & 0xff, reg & 0xff, + (val >> 8) & 0xff, val & 0xff, + }; + struct i2c_msg msg = { + .addr = i2c->addr >> 1,.flags = 0,.buf = b,.len = 4 + }; + return i2c_transfer(i2c->adap, &msg, 1) != 1 ? -EREMOTEIO : 0; +} + +static int dib8000_write_word(struct dib8000_state *state, u16 reg, u16 val) +{ + return dib8000_i2c_write16(&state->i2c, reg, val); +} + +const int16_t coeff_2k_sb_1seg_dqpsk[8] = { + (769 << 5) | 0x0a, (745 << 5) | 0x03, (595 << 5) | 0x0d, (769 << 5) | 0x0a, (920 << 5) | 0x09, (784 << 5) | 0x02, (519 << 5) | 0x0c, + (920 << 5) | 0x09 +}; + +const int16_t coeff_2k_sb_1seg[8] = { + (692 << 5) | 0x0b, (683 << 5) | 0x01, (519 << 5) | 0x09, (692 << 5) | 0x0b, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f +}; + +const int16_t coeff_2k_sb_3seg_0dqpsk_1dqpsk[8] = { + (832 << 5) | 0x10, (912 << 5) | 0x05, (900 << 5) | 0x12, (832 << 5) | 0x10, (-931 << 5) | 0x0f, (912 << 5) | 0x04, (807 << 5) | 0x11, + (-931 << 5) | 0x0f +}; + +const int16_t coeff_2k_sb_3seg_0dqpsk[8] = { + (622 << 5) | 0x0c, (941 << 5) | 0x04, (796 << 5) | 0x10, (622 << 5) | 0x0c, (982 << 5) | 0x0c, (519 << 5) | 0x02, (572 << 5) | 0x0e, + (982 << 5) | 0x0c +}; + +const int16_t coeff_2k_sb_3seg_1dqpsk[8] = { + (699 << 5) | 0x14, (607 << 5) | 0x04, (944 << 5) | 0x13, (699 << 5) | 0x14, (-720 << 5) | 0x0d, (640 << 5) | 0x03, (866 << 5) | 0x12, + (-720 << 5) | 0x0d +}; + +const int16_t coeff_2k_sb_3seg[8] = { + (664 << 5) | 0x0c, (925 << 5) | 0x03, (937 << 5) | 0x10, (664 << 5) | 0x0c, (-610 << 5) | 0x0a, (697 << 5) | 0x01, (836 << 5) | 0x0e, + (-610 << 5) | 0x0a +}; + +const int16_t coeff_4k_sb_1seg_dqpsk[8] = { + (-955 << 5) | 0x0e, (687 << 5) | 0x04, (818 << 5) | 0x10, (-955 << 5) | 0x0e, (-922 << 5) | 0x0d, (750 << 5) | 0x03, (665 << 5) | 0x0f, + (-922 << 5) | 0x0d +}; + +const int16_t coeff_4k_sb_1seg[8] = { + (638 << 5) | 0x0d, (683 << 5) | 0x02, (638 << 5) | 0x0d, (638 << 5) | 0x0d, (-655 << 5) | 0x0a, (517 << 5) | 0x00, (698 << 5) | 0x0d, + (-655 << 5) | 0x0a +}; + +const int16_t coeff_4k_sb_3seg_0dqpsk_1dqpsk[8] = { + (-707 << 5) | 0x14, (910 << 5) | 0x06, (889 << 5) | 0x16, (-707 << 5) | 0x14, (-958 << 5) | 0x13, (993 << 5) | 0x05, (523 << 5) | 0x14, + (-958 << 5) | 0x13 +}; + +const int16_t coeff_4k_sb_3seg_0dqpsk[8] = { + (-723 << 5) | 0x13, (910 << 5) | 0x05, (777 << 5) | 0x14, (-723 << 5) | 0x13, (-568 << 5) | 0x0f, (547 << 5) | 0x03, (696 << 5) | 0x12, + (-568 << 5) | 0x0f +}; + +const int16_t coeff_4k_sb_3seg_1dqpsk[8] = { + (-940 << 5) | 0x15, (607 << 5) | 0x05, (915 << 5) | 0x16, (-940 << 5) | 0x15, (-848 << 5) | 0x13, (683 << 5) | 0x04, (543 << 5) | 0x14, + (-848 << 5) | 0x13 +}; + +const int16_t coeff_4k_sb_3seg[8] = { + (612 << 5) | 0x12, (910 << 5) | 0x04, (864 << 5) | 0x14, (612 << 5) | 0x12, (-869 << 5) | 0x13, (683 << 5) | 0x02, (869 << 5) | 0x12, + (-869 << 5) | 0x13 +}; + +const int16_t coeff_8k_sb_1seg_dqpsk[8] = { + (-835 << 5) | 0x12, (684 << 5) | 0x05, (735 << 5) | 0x14, (-835 << 5) | 0x12, (-598 << 5) | 0x10, (781 << 5) | 0x04, (739 << 5) | 0x13, + (-598 << 5) | 0x10 +}; + +const int16_t coeff_8k_sb_1seg[8] = { + (673 << 5) | 0x0f, (683 << 5) | 0x03, (808 << 5) | 0x12, (673 << 5) | 0x0f, (585 << 5) | 0x0f, (512 << 5) | 0x01, (780 << 5) | 0x0f, + (585 << 5) | 0x0f +}; + +const int16_t coeff_8k_sb_3seg_0dqpsk_1dqpsk[8] = { + (863 << 5) | 0x17, (930 << 5) | 0x07, (878 << 5) | 0x19, (863 << 5) | 0x17, (0 << 5) | 0x14, (521 << 5) | 0x05, (980 << 5) | 0x18, + (0 << 5) | 0x14 +}; + +const int16_t coeff_8k_sb_3seg_0dqpsk[8] = { + (-924 << 5) | 0x17, (910 << 5) | 0x06, (774 << 5) | 0x17, (-924 << 5) | 0x17, (-877 << 5) | 0x15, (565 << 5) | 0x04, (553 << 5) | 0x15, + (-877 << 5) | 0x15 +}; + +const int16_t coeff_8k_sb_3seg_1dqpsk[8] = { + (-921 << 5) | 0x19, (607 << 5) | 0x06, (881 << 5) | 0x19, (-921 << 5) | 0x19, (-921 << 5) | 0x14, (713 << 5) | 0x05, (1018 << 5) | 0x18, + (-921 << 5) | 0x14 +}; + +const int16_t coeff_8k_sb_3seg[8] = { + (514 << 5) | 0x14, (910 << 5) | 0x05, (861 << 5) | 0x17, (514 << 5) | 0x14, (690 << 5) | 0x14, (683 << 5) | 0x03, (662 << 5) | 0x15, + (690 << 5) | 0x14 +}; + +const int16_t ana_fe_coeff_3seg[24] = { + 81, 80, 78, 74, 68, 61, 54, 45, 37, 28, 19, 11, 4, 1022, 1017, 1013, 1010, 1008, 1008, 1008, 1008, 1010, 1014, 1017 +}; + +const int16_t ana_fe_coeff_1seg[24] = { + 249, 226, 164, 82, 5, 981, 970, 988, 1018, 20, 31, 26, 8, 1012, 1000, 1018, 1012, 8, 15, 14, 9, 3, 1017, 1003 +}; + +const int16_t ana_fe_coeff_13seg[24] = { + 396, 305, 105, -51, -77, -12, 41, 31, -11, -30, -11, 14, 15, -2, -13, -7, 5, 8, 1, -6, -7, -3, 0, 1 +}; + +static u16 fft_to_mode(struct dib8000_state *state) +{ + u16 mode; + switch (state->fe.dtv_property_cache.transmission_mode) { + case TRANSMISSION_MODE_2K: + mode = 1; + break; + case TRANSMISSION_MODE_4K: + mode = 2; + break; + default: + case TRANSMISSION_MODE_AUTO: + case TRANSMISSION_MODE_8K: + mode = 3; + break; + } + return mode; +} + +static void dib8000_set_acquisition_mode(struct dib8000_state *state) +{ + u16 nud = dib8000_read_word(state, 298); + nud |= (1 << 3) | (1 << 0); + dprintk("acquisition mode activated"); + dib8000_write_word(state, 298, nud); +} + +static int dib8000_set_output_mode(struct dib8000_state *state, int mode) +{ + u16 outreg, fifo_threshold, smo_mode, sram = 0x0205; /* by default SDRAM deintlv is enabled */ + + outreg = 0; + fifo_threshold = 1792; + smo_mode = (dib8000_read_word(state, 299) & 0x0050) | (1 << 1); + + dprintk("-I- Setting output mode for demod %p to %d", &state->fe, mode); + + switch (mode) { + case OUTMODE_MPEG2_PAR_GATED_CLK: // STBs with parallel gated clock + outreg = (1 << 10); /* 0x0400 */ + break; + case OUTMODE_MPEG2_PAR_CONT_CLK: // STBs with parallel continues clock + outreg = (1 << 10) | (1 << 6); /* 0x0440 */ + break; + case OUTMODE_MPEG2_SERIAL: // STBs with serial input + outreg = (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */ + break; + case OUTMODE_DIVERSITY: + if (state->cfg.hostbus_diversity) { + outreg = (1 << 10) | (4 << 6); /* 0x0500 */ + sram &= 0xfdff; + } else + sram |= 0x0c00; + break; + case OUTMODE_MPEG2_FIFO: // e.g. USB feeding + smo_mode |= (3 << 1); + fifo_threshold = 512; + outreg = (1 << 10) | (5 << 6); + break; + case OUTMODE_HIGH_Z: // disable + outreg = 0; + break; + + case OUTMODE_ANALOG_ADC: + outreg = (1 << 10) | (3 << 6); + dib8000_set_acquisition_mode(state); + break; + + default: + dprintk("Unhandled output_mode passed to be set for demod %p", &state->fe); + return -EINVAL; + } + + if (state->cfg.output_mpeg2_in_188_bytes) + smo_mode |= (1 << 5); + + dib8000_write_word(state, 299, smo_mode); + dib8000_write_word(state, 300, fifo_threshold); /* synchronous fread */ + dib8000_write_word(state, 1286, outreg); + dib8000_write_word(state, 1291, sram); + + return 0; +} + +static int dib8000_set_diversity_in(struct dvb_frontend *fe, int onoff) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 sync_wait = dib8000_read_word(state, 273) & 0xfff0; + + if (!state->differential_constellation) { + dib8000_write_word(state, 272, 1 << 9); //dvsy_off_lmod4 = 1 + dib8000_write_word(state, 273, sync_wait | (1 << 2) | 2); // sync_enable = 1; comb_mode = 2 + } else { + dib8000_write_word(state, 272, 0); //dvsy_off_lmod4 = 0 + dib8000_write_word(state, 273, sync_wait); // sync_enable = 0; comb_mode = 0 + } + state->diversity_onoff = onoff; + + switch (onoff) { + case 0: /* only use the internal way - not the diversity input */ + dib8000_write_word(state, 270, 1); + dib8000_write_word(state, 271, 0); + break; + case 1: /* both ways */ + dib8000_write_word(state, 270, 6); + dib8000_write_word(state, 271, 6); + break; + case 2: /* only the diversity input */ + dib8000_write_word(state, 270, 0); + dib8000_write_word(state, 271, 1); + break; + } + return 0; +} + +static void dib8000_set_power_mode(struct dib8000_state *state, enum dib8000_power_mode mode) +{ + /* by default everything is going to be powered off */ + u16 reg_774 = 0x3fff, reg_775 = 0xffff, reg_776 = 0xffff, + reg_900 = (dib8000_read_word(state, 900) & 0xfffc) | 0x3, reg_1280 = (dib8000_read_word(state, 1280) & 0x00ff) | 0xff00; + + /* now, depending on the requested mode, we power on */ + switch (mode) { + /* power up everything in the demod */ + case DIB8000M_POWER_ALL: + reg_774 = 0x0000; + reg_775 = 0x0000; + reg_776 = 0x0000; + reg_900 &= 0xfffc; + reg_1280 &= 0x00ff; + break; + case DIB8000M_POWER_INTERFACE_ONLY: + reg_1280 &= 0x00ff; + break; + } + + dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x", reg_774, reg_775, reg_776, reg_900, reg_1280); + dib8000_write_word(state, 774, reg_774); + dib8000_write_word(state, 775, reg_775); + dib8000_write_word(state, 776, reg_776); + dib8000_write_word(state, 900, reg_900); + dib8000_write_word(state, 1280, reg_1280); +} + +static int dib8000_set_adc_state(struct dib8000_state *state, enum dibx000_adc_states no) +{ + int ret = 0; + u16 reg_907 = dib8000_read_word(state, 907), reg_908 = dib8000_read_word(state, 908); + + switch (no) { + case DIBX000_SLOW_ADC_ON: + reg_908 |= (1 << 1) | (1 << 0); + ret |= dib8000_write_word(state, 908, reg_908); + reg_908 &= ~(1 << 1); + break; + + case DIBX000_SLOW_ADC_OFF: + reg_908 |= (1 << 1) | (1 << 0); + break; + + case DIBX000_ADC_ON: + reg_907 &= 0x0fff; + reg_908 &= 0x0003; + break; + + case DIBX000_ADC_OFF: // leave the VBG voltage on + reg_907 |= (1 << 14) | (1 << 13) | (1 << 12); + reg_908 |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2); + break; + + case DIBX000_VBG_ENABLE: + reg_907 &= ~(1 << 15); + break; + + case DIBX000_VBG_DISABLE: + reg_907 |= (1 << 15); + break; + + default: + break; + } + + ret |= dib8000_write_word(state, 907, reg_907); + ret |= dib8000_write_word(state, 908, reg_908); + + return ret; +} + +static int dib8000_set_bandwidth(struct dib8000_state *state, u32 bw) +{ + u32 timf; + + if (bw == 0) + bw = 6000; + + if (state->timf == 0) { + dprintk("using default timf"); + timf = state->timf_default; + } else { + dprintk("using updated timf"); + timf = state->timf; + } + + dib8000_write_word(state, 29, (u16) ((timf >> 16) & 0xffff)); + dib8000_write_word(state, 30, (u16) ((timf) & 0xffff)); + + return 0; +} + +static int dib8000_sad_calib(struct dib8000_state *state) +{ +/* internal */ + dib8000_write_word(state, 923, (0 << 1) | (0 << 0)); + dib8000_write_word(state, 924, 776); // 0.625*3.3 / 4096 + + /* do the calibration */ + dib8000_write_word(state, 923, (1 << 0)); + dib8000_write_word(state, 923, (0 << 0)); + + msleep(1); + return 0; +} + +int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value) +{ + struct dib8000_state *state = fe->demodulator_priv; + if (value > 4095) + value = 4095; + state->wbd_ref = value; + return dib8000_write_word(state, 106, value); +} + +EXPORT_SYMBOL(dib8000_set_wbd_ref); +static void dib8000_reset_pll_common(struct dib8000_state *state, const struct dibx000_bandwidth_config *bw) +{ + dprintk("ifreq: %d %x, inversion: %d", bw->ifreq, bw->ifreq, bw->ifreq >> 25); + dib8000_write_word(state, 23, (u16) (((bw->internal * 1000) >> 16) & 0xffff)); /* P_sec_len */ + dib8000_write_word(state, 24, (u16) ((bw->internal * 1000) & 0xffff)); + dib8000_write_word(state, 27, (u16) ((bw->ifreq >> 16) & 0x01ff)); + dib8000_write_word(state, 28, (u16) (bw->ifreq & 0xffff)); + dib8000_write_word(state, 26, (u16) ((bw->ifreq >> 25) & 0x0003)); + + dib8000_write_word(state, 922, bw->sad_cfg); +} + +static void dib8000_reset_pll(struct dib8000_state *state) +{ + const struct dibx000_bandwidth_config *pll = state->cfg.pll; + u16 clk_cfg1; + + // clk_cfg0 + dib8000_write_word(state, 901, (pll->pll_prediv << 8) | (pll->pll_ratio << 0)); + + // clk_cfg1 + clk_cfg1 = (1 << 10) | (0 << 9) | (pll->IO_CLK_en_core << 8) | + (pll->bypclk_div << 5) | (pll->enable_refdiv << 4) | (1 << 3) | (pll->pll_range << 1) | (pll->pll_reset << 0); + + dib8000_write_word(state, 902, clk_cfg1); + clk_cfg1 = (clk_cfg1 & 0xfff7) | (pll->pll_bypass << 3); + dib8000_write_word(state, 902, clk_cfg1); + + dprintk("clk_cfg1: 0x%04x", clk_cfg1); /* 0x507 1 0 1 000 0 0 11 1 */ + + /* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */ + if (state->cfg.pll->ADClkSrc == 0) + dib8000_write_word(state, 904, (0 << 15) | (0 << 12) | (0 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1)); + else if (state->cfg.refclksel != 0) + dib8000_write_word(state, 904, + (0 << 15) | (1 << 12) | ((state->cfg.refclksel & 0x3) << 10) | (pll->modulo << 8) | (pll-> + ADClkSrc << 7) | (0 << 1)); + else + dib8000_write_word(state, 904, (0 << 15) | (1 << 12) | (3 << 10) | (pll->modulo << 8) | (pll->ADClkSrc << 7) | (0 << 1)); + + dib8000_reset_pll_common(state, pll); +} + +static int dib8000_reset_gpio(struct dib8000_state *st) +{ + /* reset the GPIOs */ + dib8000_write_word(st, 1029, st->cfg.gpio_dir); + dib8000_write_word(st, 1030, st->cfg.gpio_val); + + /* TODO 782 is P_gpio_od */ + + dib8000_write_word(st, 1032, st->cfg.gpio_pwm_pos); + + dib8000_write_word(st, 1037, st->cfg.pwm_freq_div); + return 0; +} + +static int dib8000_cfg_gpio(struct dib8000_state *st, u8 num, u8 dir, u8 val) +{ + st->cfg.gpio_dir = dib8000_read_word(st, 1029); + st->cfg.gpio_dir &= ~(1 << num); /* reset the direction bit */ + st->cfg.gpio_dir |= (dir & 0x1) << num; /* set the new direction */ + dib8000_write_word(st, 1029, st->cfg.gpio_dir); + + st->cfg.gpio_val = dib8000_read_word(st, 1030); + st->cfg.gpio_val &= ~(1 << num); /* reset the direction bit */ + st->cfg.gpio_val |= (val & 0x01) << num; /* set the new value */ + dib8000_write_word(st, 1030, st->cfg.gpio_val); + + dprintk("gpio dir: %x: gpio val: %x", st->cfg.gpio_dir, st->cfg.gpio_val); + + return 0; +} + +int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) +{ + struct dib8000_state *state = fe->demodulator_priv; + return dib8000_cfg_gpio(state, num, dir, val); +} + +EXPORT_SYMBOL(dib8000_set_gpio); +static const u16 dib8000_defaults[] = { + /* auto search configuration - lock0 by default waiting + * for cpil_lock; lock1 cpil_lock; lock2 tmcc_sync_lock */ + 3, 7, + 0x0004, + 0x0400, + 0x0814, + + 12, 11, + 0x001b, + 0x7740, + 0x005b, + 0x8d80, + 0x01c9, + 0xc380, + 0x0000, + 0x0080, + 0x0000, + 0x0090, + 0x0001, + 0xd4c0, + + /*1, 32, + 0x6680 // P_corm_thres Lock algorithms configuration */ + + 11, 80, /* set ADC level to -16 */ + (1 << 13) - 825 - 117, + (1 << 13) - 837 - 117, + (1 << 13) - 811 - 117, + (1 << 13) - 766 - 117, + (1 << 13) - 737 - 117, + (1 << 13) - 693 - 117, + (1 << 13) - 648 - 117, + (1 << 13) - 619 - 117, + (1 << 13) - 575 - 117, + (1 << 13) - 531 - 117, + (1 << 13) - 501 - 117, + + 4, 108, + 0, + 0, + 0, + 0, + + 1, 175, + 0x0410, + 1, 179, + 8192, // P_fft_nb_to_cut + + 6, 181, + 0x2800, // P_coff_corthres_ ( 2k 4k 8k ) 0x2800 + 0x2800, + 0x2800, + 0x2800, // P_coff_cpilthres_ ( 2k 4k 8k ) 0x2800 + 0x2800, + 0x2800, + + 2, 193, + 0x0666, // P_pha3_thres + 0x0000, // P_cti_use_cpe, P_cti_use_prog + + 2, 205, + 0x200f, // P_cspu_regul, P_cspu_win_cut + 0x000f, // P_des_shift_work + + 5, 215, + 0x023d, // P_adp_regul_cnt + 0x00a4, // P_adp_noise_cnt + 0x00a4, // P_adp_regul_ext + 0x7ff0, // P_adp_noise_ext + 0x3ccc, // P_adp_fil + + 1, 230, + 0x0000, // P_2d_byp_ti_num + + 1, 263, + 0x800, //P_equal_thres_wgn + + 1, 268, + (2 << 9) | 39, // P_equal_ctrl_synchro, P_equal_speedmode + + 1, 270, + 0x0001, // P_div_lock0_wait + 1, 285, + 0x0020, //p_fec_ + 1, 299, + 0x0062, // P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard + + 1, 338, + (1 << 12) | // P_ctrl_corm_thres4pre_freq_inh=1 + (1 << 10) | // P_ctrl_pre_freq_mode_sat=1 + (0 << 9) | // P_ctrl_pre_freq_inh=0 + (3 << 5) | // P_ctrl_pre_freq_step=3 + (1 << 0), // P_pre_freq_win_len=1 + + 1, 903, + (0 << 4) | 2, // P_divclksel=0 P_divbitsel=2 (was clk=3,bit=1 for MPW) + + 0, +}; + +static u16 dib8000_identify(struct i2c_device *client) +{ + u16 value; + + //because of glitches sometimes + value = dib8000_i2c_read16(client, 896); + + if ((value = dib8000_i2c_read16(client, 896)) != 0x01b3) { + dprintk("wrong Vendor ID (read=0x%x)", value); + return 0; + } + + value = dib8000_i2c_read16(client, 897); + if (value != 0x8000 && value != 0x8001 && value != 0x8002) { + dprintk("wrong Device ID (%x)", value); + return 0; + } + + switch (value) { + case 0x8000: + dprintk("found DiB8000A"); + break; + case 0x8001: + dprintk("found DiB8000B"); + break; + case 0x8002: + dprintk("found DiB8000C"); + break; + } + return value; +} + +static int dib8000_reset(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + + dib8000_write_word(state, 1287, 0x0003); /* sram lead in, rdy */ + + if ((state->revision = dib8000_identify(&state->i2c)) == 0) + return -EINVAL; + + if (state->revision == 0x8000) + dprintk("error : dib8000 MA not supported"); + + dibx000_reset_i2c_master(&state->i2c_master); + + dib8000_set_power_mode(state, DIB8000M_POWER_ALL); + + /* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */ + dib8000_set_adc_state(state, DIBX000_VBG_ENABLE); + + /* restart all parts */ + dib8000_write_word(state, 770, 0xffff); + dib8000_write_word(state, 771, 0xffff); + dib8000_write_word(state, 772, 0xfffc); + dib8000_write_word(state, 898, 0x000c); // sad + dib8000_write_word(state, 1280, 0x004d); + dib8000_write_word(state, 1281, 0x000c); + + dib8000_write_word(state, 770, 0x0000); + dib8000_write_word(state, 771, 0x0000); + dib8000_write_word(state, 772, 0x0000); + dib8000_write_word(state, 898, 0x0004); // sad + dib8000_write_word(state, 1280, 0x0000); + dib8000_write_word(state, 1281, 0x0000); + + /* drives */ + if (state->cfg.drives) + dib8000_write_word(state, 906, state->cfg.drives); + else { + dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal."); + dib8000_write_word(state, 906, 0x2d98); // min drive SDRAM - not optimal - adjust + } + + dib8000_reset_pll(state); + + if (dib8000_reset_gpio(state) != 0) + dprintk("GPIO reset was not successful."); + + if (dib8000_set_output_mode(state, OUTMODE_HIGH_Z) != 0) + dprintk("OUTPUT_MODE could not be resetted."); + + state->current_agc = NULL; + + // P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ... + /* P_iqc_ca2 = 0; P_iqc_impnc_on = 0; P_iqc_mode = 0; */ + if (state->cfg.pll->ifreq == 0) + dib8000_write_word(state, 40, 0x0755); /* P_iqc_corr_inh = 0 enable IQcorr block */ + else + dib8000_write_word(state, 40, 0x1f55); /* P_iqc_corr_inh = 1 disable IQcorr block */ + + { + u16 l = 0, r; + const u16 *n; + n = dib8000_defaults; + l = *n++; + while (l) { + r = *n++; + do { + dib8000_write_word(state, r, *n++); + r++; + } while (--l); + l = *n++; + } + } + state->isdbt_cfg_loaded = 0; + + //div_cfg override for special configs + if (state->cfg.div_cfg != 0) + dib8000_write_word(state, 903, state->cfg.div_cfg); + + /* unforce divstr regardless whether i2c enumeration was done or not */ + dib8000_write_word(state, 1285, dib8000_read_word(state, 1285) & ~(1 << 1)); + + dib8000_set_bandwidth(state, 6000); + + dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON); + dib8000_sad_calib(state); + dib8000_set_adc_state(state, DIBX000_SLOW_ADC_OFF); + + dib8000_set_power_mode(state, DIB8000M_POWER_INTERFACE_ONLY); + + return 0; +} + +static void dib8000_restart_agc(struct dib8000_state *state) +{ + // P_restart_iqc & P_restart_agc + dib8000_write_word(state, 770, 0x0a00); + dib8000_write_word(state, 770, 0x0000); +} + +static int dib8000_update_lna(struct dib8000_state *state) +{ + u16 dyn_gain; + + if (state->cfg.update_lna) { + // read dyn_gain here (because it is demod-dependent and not tuner) + dyn_gain = dib8000_read_word(state, 390); + + if (state->cfg.update_lna(&state->fe, dyn_gain)) { // LNA has changed + dib8000_restart_agc(state); + return 1; + } + } + return 0; +} + +static int dib8000_set_agc_config(struct dib8000_state *state, u8 band) +{ + struct dibx000_agc_config *agc = NULL; + int i; + if (state->current_band == band && state->current_agc != NULL) + return 0; + state->current_band = band; + + for (i = 0; i < state->cfg.agc_config_count; i++) + if (state->cfg.agc[i].band_caps & band) { + agc = &state->cfg.agc[i]; + break; + } + + if (agc == NULL) { + dprintk("no valid AGC configuration found for band 0x%02x", band); + return -EINVAL; + } + + state->current_agc = agc; + + /* AGC */ + dib8000_write_word(state, 76, agc->setup); + dib8000_write_word(state, 77, agc->inv_gain); + dib8000_write_word(state, 78, agc->time_stabiliz); + dib8000_write_word(state, 101, (agc->alpha_level << 12) | agc->thlock); + + // Demod AGC loop configuration + dib8000_write_word(state, 102, (agc->alpha_mant << 5) | agc->alpha_exp); + dib8000_write_word(state, 103, (agc->beta_mant << 6) | agc->beta_exp); + + dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d", + state->wbd_ref != 0 ? state->wbd_ref : agc->wbd_ref, agc->wbd_sel, !agc->perform_agc_softsplit, agc->wbd_sel); + + /* AGC continued */ + if (state->wbd_ref != 0) + dib8000_write_word(state, 106, state->wbd_ref); + else // use default + dib8000_write_word(state, 106, agc->wbd_ref); + dib8000_write_word(state, 107, (agc->wbd_alpha << 9) | (agc->perform_agc_softsplit << 8)); + dib8000_write_word(state, 108, agc->agc1_max); + dib8000_write_word(state, 109, agc->agc1_min); + dib8000_write_word(state, 110, agc->agc2_max); + dib8000_write_word(state, 111, agc->agc2_min); + dib8000_write_word(state, 112, (agc->agc1_pt1 << 8) | agc->agc1_pt2); + dib8000_write_word(state, 113, (agc->agc1_slope1 << 8) | agc->agc1_slope2); + dib8000_write_word(state, 114, (agc->agc2_pt1 << 8) | agc->agc2_pt2); + dib8000_write_word(state, 115, (agc->agc2_slope1 << 8) | agc->agc2_slope2); + + dib8000_write_word(state, 75, agc->agc1_pt3); + dib8000_write_word(state, 923, (dib8000_read_word(state, 923) & 0xffe3) | (agc->wbd_inv << 4) | (agc->wbd_sel << 2)); /*LB : 929 -> 923 */ + + return 0; +} + +static int dib8000_agc_soft_split(struct dib8000_state *state) +{ + u16 agc, split_offset; + + if (!state->current_agc || !state->current_agc->perform_agc_softsplit || state->current_agc->split.max == 0) + return FE_CALLBACK_TIME_NEVER; + + // n_agc_global + agc = dib8000_read_word(state, 390); + + if (agc > state->current_agc->split.min_thres) + split_offset = state->current_agc->split.min; + else if (agc < state->current_agc->split.max_thres) + split_offset = state->current_agc->split.max; + else + split_offset = state->current_agc->split.max * + (agc - state->current_agc->split.min_thres) / (state->current_agc->split.max_thres - state->current_agc->split.min_thres); + + dprintk("AGC split_offset: %d", split_offset); + + // P_agc_force_split and P_agc_split_offset + dib8000_write_word(state, 107, (dib8000_read_word(state, 107) & 0xff00) | split_offset); + return 5000; +} + +static int dib8000_agc_startup(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + enum frontend_tune_state *tune_state = &state->tune_state; + + int ret = 0; + + switch (*tune_state) { + case CT_AGC_START: + // set power-up level: interf+analog+AGC + + dib8000_set_adc_state(state, DIBX000_ADC_ON); + + if (dib8000_set_agc_config(state, (unsigned char)(BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000))) != 0) { + *tune_state = CT_AGC_STOP; + state->status = FE_STATUS_TUNE_FAILED; + break; + } + + ret = 70; + *tune_state = CT_AGC_STEP_0; + break; + + case CT_AGC_STEP_0: + //AGC initialization + if (state->cfg.agc_control) + state->cfg.agc_control(&state->fe, 1); + + dib8000_restart_agc(state); + + // wait AGC rough lock time + ret = 50; + *tune_state = CT_AGC_STEP_1; + break; + + case CT_AGC_STEP_1: + // wait AGC accurate lock time + ret = 70; + + if (dib8000_update_lna(state)) + // wait only AGC rough lock time + ret = 50; + else + *tune_state = CT_AGC_STEP_2; + break; + + case CT_AGC_STEP_2: + dib8000_agc_soft_split(state); + + if (state->cfg.agc_control) + state->cfg.agc_control(&state->fe, 0); + + *tune_state = CT_AGC_STOP; + break; + default: + ret = dib8000_agc_soft_split(state); + break; + } + return ret; + +} + +static void dib8000_update_timf(struct dib8000_state *state) +{ + u32 timf = state->timf = dib8000_read32(state, 435); + + dib8000_write_word(state, 29, (u16) (timf >> 16)); + dib8000_write_word(state, 30, (u16) (timf & 0xffff)); + dprintk("Updated timing frequency: %d (default: %d)", state->timf, state->timf_default); +} + +static void dib8000_set_channel(struct dib8000_state *state, u8 seq, u8 autosearching) +{ + u16 mode, max_constellation, seg_diff_mask = 0, nbseg_diff = 0; + u8 guard, crate, constellation, timeI; + u8 permu_seg[] = { 6, 5, 7, 4, 8, 3, 9, 2, 10, 1, 11, 0, 12 }; + u16 i, coeff[4], P_cfr_left_edge = 0, P_cfr_right_edge = 0, seg_mask13 = 0x1fff; // All 13 segments enabled + const s16 *ncoeff, *ana_fe; + u16 tmcc_pow = 0; + u16 coff_pow = 0x2800; + u16 init_prbs = 0xfff; + u16 ana_gain = 0; + u16 adc_target_16dB[11] = { + (1 << 13) - 825 - 117, + (1 << 13) - 837 - 117, + (1 << 13) - 811 - 117, + (1 << 13) - 766 - 117, + (1 << 13) - 737 - 117, + (1 << 13) - 693 - 117, + (1 << 13) - 648 - 117, + (1 << 13) - 619 - 117, + (1 << 13) - 575 - 117, + (1 << 13) - 531 - 117, + (1 << 13) - 501 - 117 + }; + + if (state->ber_monitored_layer != LAYER_ALL) + dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & 0x60) | state->ber_monitored_layer); + else + dib8000_write_word(state, 285, dib8000_read_word(state, 285) & 0x60); + + i = dib8000_read_word(state, 26) & 1; // P_dds_invspec + dib8000_write_word(state, 26, state->fe.dtv_property_cache.inversion ^ i); + + if (state->fe.dtv_property_cache.isdbt_sb_mode) { + //compute new dds_freq for the seg and adjust prbs + int seg_offset = + state->fe.dtv_property_cache.isdbt_sb_segment_idx - (state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) - + (state->fe.dtv_property_cache.isdbt_sb_segment_count % 2); + int clk = state->cfg.pll->internal; + u32 segtodds = ((u32) (430 << 23) / clk) << 3; // segtodds = SegBW / Fclk * pow(2,26) + int dds_offset = seg_offset * segtodds; + int new_dds, sub_channel; + if ((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0) // if even + dds_offset -= (int)(segtodds / 2); + + if (state->cfg.pll->ifreq == 0) { + if ((state->fe.dtv_property_cache.inversion ^ i) == 0) { + dib8000_write_word(state, 26, dib8000_read_word(state, 26) | 1); + new_dds = dds_offset; + } else + new_dds = dds_offset; + + // We shift tuning frequency if the wanted segment is : + // - the segment of center frequency with an odd total number of segments + // - the segment to the left of center frequency with an even total number of segments + // - the segment to the right of center frequency with an even total number of segments + if ((state->fe.dtv_property_cache.delivery_system == SYS_ISDBT) && (state->fe.dtv_property_cache.isdbt_sb_mode == 1) + && + (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) + && (state->fe.dtv_property_cache.isdbt_sb_segment_idx == + ((state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) + 1))) + || (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0) + && (state->fe.dtv_property_cache.isdbt_sb_segment_idx == (state->fe.dtv_property_cache.isdbt_sb_segment_count / 2))) + || (((state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) == 0) + && (state->fe.dtv_property_cache.isdbt_sb_segment_idx == + ((state->fe.dtv_property_cache.isdbt_sb_segment_count / 2) + 1))) + )) { + new_dds -= ((u32) (850 << 22) / clk) << 4; // new_dds = 850 (freq shift in KHz) / Fclk * pow(2,26) + } + } else { + if ((state->fe.dtv_property_cache.inversion ^ i) == 0) + new_dds = state->cfg.pll->ifreq - dds_offset; + else + new_dds = state->cfg.pll->ifreq + dds_offset; + } + dib8000_write_word(state, 27, (u16) ((new_dds >> 16) & 0x01ff)); + dib8000_write_word(state, 28, (u16) (new_dds & 0xffff)); + if (state->fe.dtv_property_cache.isdbt_sb_segment_count % 2) // if odd + sub_channel = ((state->fe.dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset) + 1) % 41) / 3; + else // if even + sub_channel = ((state->fe.dtv_property_cache.isdbt_sb_subchannel + (3 * seg_offset)) % 41) / 3; + sub_channel -= 6; + + if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K + || state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_4K) { + dib8000_write_word(state, 219, dib8000_read_word(state, 219) | 0x1); //adp_pass =1 + dib8000_write_word(state, 190, dib8000_read_word(state, 190) | (0x1 << 14)); //pha3_force_pha_shift = 1 + } else { + dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); //adp_pass =0 + dib8000_write_word(state, 190, dib8000_read_word(state, 190) & 0xbfff); //pha3_force_pha_shift = 0 + } + + switch (state->fe.dtv_property_cache.transmission_mode) { + case TRANSMISSION_MODE_2K: + switch (sub_channel) { + case -6: + init_prbs = 0x0; + break; // 41, 0, 1 + case -5: + init_prbs = 0x423; + break; // 02~04 + case -4: + init_prbs = 0x9; + break; // 05~07 + case -3: + init_prbs = 0x5C7; + break; // 08~10 + case -2: + init_prbs = 0x7A6; + break; // 11~13 + case -1: + init_prbs = 0x3D8; + break; // 14~16 + case 0: + init_prbs = 0x527; + break; // 17~19 + case 1: + init_prbs = 0x7FF; + break; // 20~22 + case 2: + init_prbs = 0x79B; + break; // 23~25 + case 3: + init_prbs = 0x3D6; + break; // 26~28 + case 4: + init_prbs = 0x3A2; + break; // 29~31 + case 5: + init_prbs = 0x53B; + break; // 32~34 + case 6: + init_prbs = 0x2F4; + break; // 35~37 + default: + case 7: + init_prbs = 0x213; + break; // 38~40 + } + break; + + case TRANSMISSION_MODE_4K: + switch (sub_channel) { + case -6: + init_prbs = 0x0; + break; // 41, 0, 1 + case -5: + init_prbs = 0x208; + break; // 02~04 + case -4: + init_prbs = 0xC3; + break; // 05~07 + case -3: + init_prbs = 0x7B9; + break; // 08~10 + case -2: + init_prbs = 0x423; + break; // 11~13 + case -1: + init_prbs = 0x5C7; + break; // 14~16 + case 0: + init_prbs = 0x3D8; + break; // 17~19 + case 1: + init_prbs = 0x7FF; + break; // 20~22 + case 2: + init_prbs = 0x3D6; + break; // 23~25 + case 3: + init_prbs = 0x53B; + break; // 26~28 + case 4: + init_prbs = 0x213; + break; // 29~31 + case 5: + init_prbs = 0x29; + break; // 32~34 + case 6: + init_prbs = 0xD0; + break; // 35~37 + default: + case 7: + init_prbs = 0x48E; + break; // 38~40 + } + break; + + default: + case TRANSMISSION_MODE_8K: + switch (sub_channel) { + case -6: + init_prbs = 0x0; + break; // 41, 0, 1 + case -5: + init_prbs = 0x740; + break; // 02~04 + case -4: + init_prbs = 0x069; + break; // 05~07 + case -3: + init_prbs = 0x7DD; + break; // 08~10 + case -2: + init_prbs = 0x208; + break; // 11~13 + case -1: + init_prbs = 0x7B9; + break; // 14~16 + case 0: + init_prbs = 0x5C7; + break; // 17~19 + case 1: + init_prbs = 0x7FF; + break; // 20~22 + case 2: + init_prbs = 0x53B; + break; // 23~25 + case 3: + init_prbs = 0x29; + break; // 26~28 + case 4: + init_prbs = 0x48E; + break; // 29~31 + case 5: + init_prbs = 0x4C4; + break; // 32~34 + case 6: + init_prbs = 0x367; + break; // 33~37 + default: + case 7: + init_prbs = 0x684; + break; // 38~40 + } + break; + } + } else { // if not state->fe.dtv_property_cache.isdbt_sb_mode + dib8000_write_word(state, 27, (u16) ((state->cfg.pll->ifreq >> 16) & 0x01ff)); + dib8000_write_word(state, 28, (u16) (state->cfg.pll->ifreq & 0xffff)); + dib8000_write_word(state, 26, (u16) ((state->cfg.pll->ifreq >> 25) & 0x0003)); + } + /*P_mode == ?? */ + dib8000_write_word(state, 10, (seq << 4)); + // dib8000_write_word(state, 287, (dib8000_read_word(state, 287) & 0xe000) | 0x1000); + + switch (state->fe.dtv_property_cache.guard_interval) { + case GUARD_INTERVAL_1_32: + guard = 0; + break; + case GUARD_INTERVAL_1_16: + guard = 1; + break; + case GUARD_INTERVAL_1_8: + guard = 2; + break; + case GUARD_INTERVAL_1_4: + default: + guard = 3; + break; + } + + dib8000_write_word(state, 1, (init_prbs << 2) | (guard & 0x3)); // ADDR 1 + + max_constellation = DQPSK; + for (i = 0; i < 3; i++) { + switch (state->fe.dtv_property_cache.layer[i].modulation) { + case DQPSK: + constellation = 0; + break; + case QPSK: + constellation = 1; + break; + case QAM_16: + constellation = 2; + break; + case QAM_64: + default: + constellation = 3; + break; + } + + switch (state->fe.dtv_property_cache.layer[i].fec) { + case FEC_1_2: + crate = 1; + break; + case FEC_2_3: + crate = 2; + break; + case FEC_3_4: + crate = 3; + break; + case FEC_5_6: + crate = 5; + break; + case FEC_7_8: + default: + crate = 7; + break; + } + + if ((state->fe.dtv_property_cache.layer[i].interleaving > 0) && + ((state->fe.dtv_property_cache.layer[i].interleaving <= 3) || + (state->fe.dtv_property_cache.layer[i].interleaving == 4 && state->fe.dtv_property_cache.isdbt_sb_mode == 1)) + ) + timeI = state->fe.dtv_property_cache.layer[i].interleaving; + else + timeI = 0; + dib8000_write_word(state, 2 + i, (constellation << 10) | ((state->fe.dtv_property_cache.layer[i].segment_count & 0xf) << 6) | + (crate << 3) | timeI); + if (state->fe.dtv_property_cache.layer[i].segment_count > 0) { + switch (max_constellation) { + case DQPSK: + case QPSK: + if (state->fe.dtv_property_cache.layer[i].modulation == QAM_16 || + state->fe.dtv_property_cache.layer[i].modulation == QAM_64) + max_constellation = state->fe.dtv_property_cache.layer[i].modulation; + break; + case QAM_16: + if (state->fe.dtv_property_cache.layer[i].modulation == QAM_64) + max_constellation = state->fe.dtv_property_cache.layer[i].modulation; + break; + } + } + } + + mode = fft_to_mode(state); + + //dib8000_write_word(state, 5, 13); /*p_last_seg = 13*/ + + dib8000_write_word(state, 274, (dib8000_read_word(state, 274) & 0xffcf) | + ((state->fe.dtv_property_cache.isdbt_partial_reception & 1) << 5) | ((state->fe.dtv_property_cache. + isdbt_sb_mode & 1) << 4)); + + dprintk("mode = %d ; guard = %d", mode, state->fe.dtv_property_cache.guard_interval); + + /* signal optimization parameter */ + + if (state->fe.dtv_property_cache.isdbt_partial_reception) { + seg_diff_mask = (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) << permu_seg[0]; + for (i = 1; i < 3; i++) + nbseg_diff += + (state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * state->fe.dtv_property_cache.layer[i].segment_count; + for (i = 0; i < nbseg_diff; i++) + seg_diff_mask |= 1 << permu_seg[i + 1]; + } else { + for (i = 0; i < 3; i++) + nbseg_diff += + (state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * state->fe.dtv_property_cache.layer[i].segment_count; + for (i = 0; i < nbseg_diff; i++) + seg_diff_mask |= 1 << permu_seg[i]; + } + dprintk("nbseg_diff = %X (%d)", seg_diff_mask, seg_diff_mask); + + state->differential_constellation = (seg_diff_mask != 0); + dib8000_set_diversity_in(&state->fe, state->diversity_onoff); + + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { // ISDB-Tsb + if (state->fe.dtv_property_cache.isdbt_partial_reception == 1) // 3-segments + seg_mask13 = 0x00E0; + else // 1-segment + seg_mask13 = 0x0040; + } else + seg_mask13 = 0x1fff; + + // WRITE: Mode & Diff mask + dib8000_write_word(state, 0, (mode << 13) | seg_diff_mask); + + if ((seg_diff_mask) || (state->fe.dtv_property_cache.isdbt_sb_mode)) + dib8000_write_word(state, 268, (dib8000_read_word(state, 268) & 0xF9FF) | 0x0200); + else + dib8000_write_word(state, 268, (2 << 9) | 39); //init value + + // ---- SMALL ---- + // P_small_seg_diff + dib8000_write_word(state, 352, seg_diff_mask); // ADDR 352 + + dib8000_write_word(state, 353, seg_mask13); // ADDR 353 + +/* // P_small_narrow_band=0, P_small_last_seg=13, P_small_offset_num_car=5 */ + // dib8000_write_word(state, 351, (state->fe.dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5 ); + + // ---- SMALL ---- + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { + switch (state->fe.dtv_property_cache.transmission_mode) { + case TRANSMISSION_MODE_2K: + if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // 1-seg + if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) // DQPSK + ncoeff = coeff_2k_sb_1seg_dqpsk; + else // QPSK or QAM + ncoeff = coeff_2k_sb_1seg; + } else { // 3-segments + if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) { // DQPSK on central segment + if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) // DQPSK on external segments + ncoeff = coeff_2k_sb_3seg_0dqpsk_1dqpsk; + else // QPSK or QAM on external segments + ncoeff = coeff_2k_sb_3seg_0dqpsk; + } else { // QPSK or QAM on central segment + if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) // DQPSK on external segments + ncoeff = coeff_2k_sb_3seg_1dqpsk; + else // QPSK or QAM on external segments + ncoeff = coeff_2k_sb_3seg; + } + } + break; + + case TRANSMISSION_MODE_4K: + if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // 1-seg + if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) // DQPSK + ncoeff = coeff_4k_sb_1seg_dqpsk; + else // QPSK or QAM + ncoeff = coeff_4k_sb_1seg; + } else { // 3-segments + if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) { // DQPSK on central segment + if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments + ncoeff = coeff_4k_sb_3seg_0dqpsk_1dqpsk; + } else { // QPSK or QAM on external segments + ncoeff = coeff_4k_sb_3seg_0dqpsk; + } + } else { // QPSK or QAM on central segment + if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments + ncoeff = coeff_4k_sb_3seg_1dqpsk; + } else // QPSK or QAM on external segments + ncoeff = coeff_4k_sb_3seg; + } + } + break; + + case TRANSMISSION_MODE_AUTO: + case TRANSMISSION_MODE_8K: + default: + if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // 1-seg + if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) // DQPSK + ncoeff = coeff_8k_sb_1seg_dqpsk; + else // QPSK or QAM + ncoeff = coeff_8k_sb_1seg; + } else { // 3-segments + if (state->fe.dtv_property_cache.layer[0].modulation == DQPSK) { // DQPSK on central segment + if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments + ncoeff = coeff_8k_sb_3seg_0dqpsk_1dqpsk; + } else { // QPSK or QAM on external segments + ncoeff = coeff_8k_sb_3seg_0dqpsk; + } + } else { // QPSK or QAM on central segment + if (state->fe.dtv_property_cache.layer[1].modulation == DQPSK) { // DQPSK on external segments + ncoeff = coeff_8k_sb_3seg_1dqpsk; + } else // QPSK or QAM on external segments + ncoeff = coeff_8k_sb_3seg; + } + } + break; + } + } + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) + for (i = 0; i < 8; i++) + dib8000_write_word(state, 343 + i, ncoeff[i]); + + // P_small_coef_ext_enable=ISDB-Tsb, P_small_narrow_band=ISDB-Tsb, P_small_last_seg=13, P_small_offset_num_car=5 + dib8000_write_word(state, 351, + (state->fe.dtv_property_cache.isdbt_sb_mode << 9) | (state->fe.dtv_property_cache.isdbt_sb_mode << 8) | (13 << 4) | 5); + + // ---- COFF ---- + // Carloff, the most robust + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { // Sound Broadcasting mode - use both TMCC and AC pilots + + // P_coff_cpil_alpha=4, P_coff_inh=0, P_coff_cpil_winlen=64 + // P_coff_narrow_band=1, P_coff_square_val=1, P_coff_one_seg=~partial_rcpt, P_coff_use_tmcc=1, P_coff_use_ac=1 + dib8000_write_word(state, 187, + (4 << 12) | (0 << 11) | (63 << 5) | (0x3 << 3) | ((~state->fe.dtv_property_cache.isdbt_partial_reception & 1) << 2) + | 0x3); + +/* // P_small_coef_ext_enable = 1 */ +/* dib8000_write_word(state, 351, dib8000_read_word(state, 351) | 0x200); */ + + if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // Sound Broadcasting mode 1 seg + + // P_coff_winlen=63, P_coff_thres_lock=15, P_coff_one_seg_width= (P_mode == 3) , P_coff_one_seg_sym= (P_mode-1) + if (mode == 3) + dib8000_write_word(state, 180, 0x1fcf | ((mode - 1) << 14)); + else + dib8000_write_word(state, 180, 0x0fcf | ((mode - 1) << 14)); + // P_ctrl_corm_thres4pre_freq_inh=1,P_ctrl_pre_freq_mode_sat=1, + // P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 5, P_pre_freq_win_len=4 + dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (5 << 5) | 4); + // P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8 + dib8000_write_word(state, 340, (16 << 6) | (8 << 0)); + // P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1 + dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0)); + + // P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k + dib8000_write_word(state, 181, 300); + dib8000_write_word(state, 182, 150); + dib8000_write_word(state, 183, 80); + dib8000_write_word(state, 184, 300); + dib8000_write_word(state, 185, 150); + dib8000_write_word(state, 186, 80); + } else { // Sound Broadcasting mode 3 seg + // P_coff_one_seg_sym= 1, P_coff_one_seg_width= 1, P_coff_winlen=63, P_coff_thres_lock=15 + /* if (mode == 3) */ + /* dib8000_write_word(state, 180, 0x2fca | ((0) << 14)); */ + /* else */ + /* dib8000_write_word(state, 180, 0x2fca | ((1) << 14)); */ + dib8000_write_word(state, 180, 0x1fcf | (1 << 14)); + + // P_ctrl_corm_thres4pre_freq_inh = 1, P_ctrl_pre_freq_mode_sat=1, + // P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 4, P_pre_freq_win_len=4 + dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (4 << 5) | 4); + // P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8 + dib8000_write_word(state, 340, (16 << 6) | (8 << 0)); + //P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1 + dib8000_write_word(state, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0)); + + // P_coff_corthres_8k, 4k, 2k and P_coff_cpilthres_8k, 4k, 2k + dib8000_write_word(state, 181, 350); + dib8000_write_word(state, 182, 300); + dib8000_write_word(state, 183, 250); + dib8000_write_word(state, 184, 350); + dib8000_write_word(state, 185, 300); + dib8000_write_word(state, 186, 250); + } + + } else if (state->isdbt_cfg_loaded == 0) { // if not Sound Broadcasting mode : put default values for 13 segments + dib8000_write_word(state, 180, (16 << 6) | 9); + dib8000_write_word(state, 187, (4 << 12) | (8 << 5) | 0x2); + coff_pow = 0x2800; + for (i = 0; i < 6; i++) + dib8000_write_word(state, 181 + i, coff_pow); + + // P_ctrl_corm_thres4pre_freq_inh=1, P_ctrl_pre_freq_mode_sat=1, + // P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 3, P_pre_freq_win_len=1 + dib8000_write_word(state, 338, (1 << 12) | (1 << 10) | (0 << 9) | (3 << 5) | 1); + + // P_ctrl_pre_freq_win_len=8, P_ctrl_pre_freq_thres_lockin=6 + dib8000_write_word(state, 340, (8 << 6) | (6 << 0)); + // P_ctrl_pre_freq_thres_lockout=4, P_small_use_tmcc/ac/cp=1 + dib8000_write_word(state, 341, (4 << 3) | (1 << 2) | (1 << 1) | (1 << 0)); + } + // ---- FFT ---- + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1 && state->fe.dtv_property_cache.isdbt_partial_reception == 0) // 1-seg + dib8000_write_word(state, 178, 64); // P_fft_powrange=64 + else + dib8000_write_word(state, 178, 32); // P_fft_powrange=32 + + /* make the cpil_coff_lock more robust but slower p_coff_winlen + * 6bits; p_coff_thres_lock 6bits (for coff lock if needed) + */ + /* if ( ( nbseg_diff>0)&&(nbseg_diff<13)) + dib8000_write_word(state, 187, (dib8000_read_word(state, 187) & 0xfffb) | (1 << 3)); */ + + dib8000_write_word(state, 189, ~seg_mask13 | seg_diff_mask); /* P_lmod4_seg_inh */ + dib8000_write_word(state, 192, ~seg_mask13 | seg_diff_mask); /* P_pha3_seg_inh */ + dib8000_write_word(state, 225, ~seg_mask13 | seg_diff_mask); /* P_tac_seg_inh */ + if ((!state->fe.dtv_property_cache.isdbt_sb_mode) && (state->cfg.pll->ifreq == 0)) + dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask | 0x40); /* P_equal_noise_seg_inh */ + else + dib8000_write_word(state, 266, ~seg_mask13 | seg_diff_mask); /* P_equal_noise_seg_inh */ + dib8000_write_word(state, 287, ~seg_mask13 | 0x1000); /* P_tmcc_seg_inh */ + //dib8000_write_word(state, 288, ~seg_mask13 | seg_diff_mask); /* P_tmcc_seg_eq_inh */ + if (!autosearching) + dib8000_write_word(state, 288, (~seg_mask13 | seg_diff_mask) & 0x1fff); /* P_tmcc_seg_eq_inh */ + else + dib8000_write_word(state, 288, 0x1fff); //disable equalisation of the tmcc when autosearch to be able to find the DQPSK channels. + dprintk("287 = %X (%d)", ~seg_mask13 | 0x1000, ~seg_mask13 | 0x1000); + + dib8000_write_word(state, 211, seg_mask13 & (~seg_diff_mask)); /* P_des_seg_enabled */ + + /* offset loop parameters */ + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { + if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) // Sound Broadcasting mode 1 seg + /* P_timf_alpha = (11-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */ + dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x40); + + else // Sound Broadcasting mode 3 seg + /* P_timf_alpha = (10-P_mode), P_corm_alpha=6, P_corm_thres=0x80 */ + dib8000_write_word(state, 32, ((10 - mode) << 12) | (6 << 8) | 0x60); + } else + // TODO in 13 seg, timf_alpha can always be the same or not ? + /* P_timf_alpha = (9-P_mode, P_corm_alpha=6, P_corm_thres=0x80 */ + dib8000_write_word(state, 32, ((9 - mode) << 12) | (6 << 8) | 0x80); + + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { + if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) // Sound Broadcasting mode 1 seg + /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (11-P_mode) */ + dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (10 - mode)); + + else // Sound Broadcasting mode 3 seg + /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (10-P_mode) */ + dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (9 - mode)); + } else + /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = 9 */ + dib8000_write_word(state, 37, (3 << 5) | (0 << 4) | (8 - mode)); + + /* P_dvsy_sync_wait - reuse mode */ + switch (state->fe.dtv_property_cache.transmission_mode) { + case TRANSMISSION_MODE_8K: + mode = 256; + break; + case TRANSMISSION_MODE_4K: + mode = 128; + break; + default: + case TRANSMISSION_MODE_2K: + mode = 64; + break; + } + if (state->cfg.diversity_delay == 0) + mode = (mode * (1 << (guard)) * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo + else + mode = (mode * (1 << (guard)) * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for DVSY-fifo + mode <<= 4; + dib8000_write_word(state, 273, (dib8000_read_word(state, 273) & 0x000f) | mode); + + /* channel estimation fine configuration */ + switch (max_constellation) { + case QAM_64: + ana_gain = 0x7; // -1 : avoid def_est saturation when ADC target is -16dB + coeff[0] = 0x0148; /* P_adp_regul_cnt 0.04 */ + coeff[1] = 0xfff0; /* P_adp_noise_cnt -0.002 */ + coeff[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ + coeff[3] = 0xfff8; /* P_adp_noise_ext -0.001 */ + //if (!state->cfg.hostbus_diversity) //if diversity, we should prehaps use the configuration of the max_constallation -1 + break; + case QAM_16: + ana_gain = 0x7; // -1 : avoid def_est saturation when ADC target is -16dB + coeff[0] = 0x023d; /* P_adp_regul_cnt 0.07 */ + coeff[1] = 0xffdf; /* P_adp_noise_cnt -0.004 */ + coeff[2] = 0x00a4; /* P_adp_regul_ext 0.02 */ + coeff[3] = 0xfff0; /* P_adp_noise_ext -0.002 */ + //if (!((state->cfg.hostbus_diversity) && (max_constellation == QAM_16))) + break; + default: + ana_gain = 0; // 0 : goes along with ADC target at -22dB to keep good mobile performance and lock at sensitivity level + coeff[0] = 0x099a; /* P_adp_regul_cnt 0.3 */ + coeff[1] = 0xffae; /* P_adp_noise_cnt -0.01 */ + coeff[2] = 0x0333; /* P_adp_regul_ext 0.1 */ + coeff[3] = 0xfff8; /* P_adp_noise_ext -0.002 */ + break; + } + for (mode = 0; mode < 4; mode++) + dib8000_write_word(state, 215 + mode, coeff[mode]); + + // update ana_gain depending on max constellation + dib8000_write_word(state, 116, ana_gain); + // update ADC target depending on ana_gain + if (ana_gain) { // set -16dB ADC target for ana_gain=-1 + for (i = 0; i < 10; i++) + dib8000_write_word(state, 80 + i, adc_target_16dB[i]); + } else { // set -22dB ADC target for ana_gain=0 + for (i = 0; i < 10; i++) + dib8000_write_word(state, 80 + i, adc_target_16dB[i] - 355); + } + + // ---- ANA_FE ---- + if (state->fe.dtv_property_cache.isdbt_sb_mode) { + if (state->fe.dtv_property_cache.isdbt_partial_reception == 1) // 3-segments + ana_fe = ana_fe_coeff_3seg; + else // 1-segment + ana_fe = ana_fe_coeff_1seg; + } else + ana_fe = ana_fe_coeff_13seg; + + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1 || state->isdbt_cfg_loaded == 0) + for (mode = 0; mode < 24; mode++) + dib8000_write_word(state, 117 + mode, ana_fe[mode]); + + // ---- CHAN_BLK ---- + for (i = 0; i < 13; i++) { + if ((((~seg_diff_mask) >> i) & 1) == 1) { + P_cfr_left_edge += (1 << i) * ((i == 0) || ((((seg_mask13 & (~seg_diff_mask)) >> (i - 1)) & 1) == 0)); + P_cfr_right_edge += (1 << i) * ((i == 12) || ((((seg_mask13 & (~seg_diff_mask)) >> (i + 1)) & 1) == 0)); + } + } + dib8000_write_word(state, 222, P_cfr_left_edge); // P_cfr_left_edge + dib8000_write_word(state, 223, P_cfr_right_edge); // P_cfr_right_edge + // "P_cspu_left_edge" not used => do not care + // "P_cspu_right_edge" not used => do not care + + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { // ISDB-Tsb + dib8000_write_word(state, 228, 1); // P_2d_mode_byp=1 + dib8000_write_word(state, 205, dib8000_read_word(state, 205) & 0xfff0); // P_cspu_win_cut = 0 + if (state->fe.dtv_property_cache.isdbt_partial_reception == 0 // 1-segment + && state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_2K) { + //dib8000_write_word(state, 219, dib8000_read_word(state, 219) & 0xfffe); // P_adp_pass = 0 + dib8000_write_word(state, 265, 15); // P_equal_noise_sel = 15 + } + } else if (state->isdbt_cfg_loaded == 0) { + dib8000_write_word(state, 228, 0); // default value + dib8000_write_word(state, 265, 31); // default value + dib8000_write_word(state, 205, 0x200f); // init value + } + // ---- TMCC ---- + for (i = 0; i < 3; i++) + tmcc_pow += + (((state->fe.dtv_property_cache.layer[i].modulation == DQPSK) * 4 + 1) * state->fe.dtv_property_cache.layer[i].segment_count); + // Quantif of "P_tmcc_dec_thres_?k" is (0, 5+mode, 9); + // Threshold is set at 1/4 of max power. + tmcc_pow *= (1 << (9 - 2)); + + dib8000_write_word(state, 290, tmcc_pow); // P_tmcc_dec_thres_2k + dib8000_write_word(state, 291, tmcc_pow); // P_tmcc_dec_thres_4k + dib8000_write_word(state, 292, tmcc_pow); // P_tmcc_dec_thres_8k + //dib8000_write_word(state, 287, (1 << 13) | 0x1000 ); + // ---- PHA3 ---- + + if (state->isdbt_cfg_loaded == 0) + dib8000_write_word(state, 250, 3285); /*p_2d_hspeed_thr0 */ + + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) + state->isdbt_cfg_loaded = 0; + else + state->isdbt_cfg_loaded = 1; + +} + +static int dib8000_autosearch_start(struct dvb_frontend *fe) +{ + u8 factor; + u32 value; + struct dib8000_state *state = fe->demodulator_priv; + + int slist = 0; + + state->fe.dtv_property_cache.inversion = 0; + if (!state->fe.dtv_property_cache.isdbt_sb_mode) + state->fe.dtv_property_cache.layer[0].segment_count = 13; + state->fe.dtv_property_cache.layer[0].modulation = QAM_64; + state->fe.dtv_property_cache.layer[0].fec = FEC_2_3; + state->fe.dtv_property_cache.layer[0].interleaving = 0; + + //choose the right list, in sb, always do everything + if (state->fe.dtv_property_cache.isdbt_sb_mode) { + state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K; + state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8; + slist = 7; + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); + } else { + if (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) { + if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) { + slist = 7; + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1 to have autosearch start ok with mode2 + } else + slist = 3; + } else { + if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) { + slist = 2; + dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1 + } else + slist = 0; + } + + if (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) + state->fe.dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K; + if (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) + state->fe.dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8; + + dprintk("using list for autosearch : %d", slist); + dib8000_set_channel(state, (unsigned char)slist, 1); + //dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x9fff) | (1 << 13)); // P_mode = 1 + + factor = 1; + + //set lock_mask values + dib8000_write_word(state, 6, 0x4); + dib8000_write_word(state, 7, 0x8); + dib8000_write_word(state, 8, 0x1000); + + //set lock_mask wait time values + value = 50 * state->cfg.pll->internal * factor; + dib8000_write_word(state, 11, (u16) ((value >> 16) & 0xffff)); // lock0 wait time + dib8000_write_word(state, 12, (u16) (value & 0xffff)); // lock0 wait time + value = 100 * state->cfg.pll->internal * factor; + dib8000_write_word(state, 13, (u16) ((value >> 16) & 0xffff)); // lock1 wait time + dib8000_write_word(state, 14, (u16) (value & 0xffff)); // lock1 wait time + value = 1000 * state->cfg.pll->internal * factor; + dib8000_write_word(state, 15, (u16) ((value >> 16) & 0xffff)); // lock2 wait time + dib8000_write_word(state, 16, (u16) (value & 0xffff)); // lock2 wait time + + value = dib8000_read_word(state, 0); + dib8000_write_word(state, 0, (u16) ((1 << 15) | value)); + dib8000_read_word(state, 1284); // reset the INT. n_irq_pending + dib8000_write_word(state, 0, (u16) value); + + } + + return 0; +} + +static int dib8000_autosearch_irq(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 irq_pending = dib8000_read_word(state, 1284); + + if (irq_pending & 0x1) { // failed + dprintk("dib8000_autosearch_irq failed"); + return 1; + } + + if (irq_pending & 0x2) { // succeeded + dprintk("dib8000_autosearch_irq succeeded"); + return 2; + } + + return 0; // still pending +} + +static int dib8000_tune(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + int ret = 0; + u16 value, mode = fft_to_mode(state); + + // we are already tuned - just resuming from suspend + if (state == NULL) + return -EINVAL; + + dib8000_set_bandwidth(state, state->fe.dtv_property_cache.bandwidth_hz / 1000); + dib8000_set_channel(state, 0, 0); + + // restart demod + ret |= dib8000_write_word(state, 770, 0x4000); + ret |= dib8000_write_word(state, 770, 0x0000); + msleep(45); + + /* P_ctrl_inh_cor=0, P_ctrl_alpha_cor=4, P_ctrl_inh_isi=0, P_ctrl_alpha_isi=3 */ + /* ret |= dib8000_write_word(state, 29, (0 << 9) | (4 << 5) | (0 << 4) | (3 << 0) ); workaround inh_isi stays at 1 */ + + // never achieved a lock before - wait for timfreq to update + if (state->timf == 0) { + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { + if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) // Sound Broadcasting mode 1 seg + msleep(300); + else // Sound Broadcasting mode 3 seg + msleep(500); + } else // 13 seg + msleep(200); + } + //dump_reg(state); + if (state->fe.dtv_property_cache.isdbt_sb_mode == 1) { + if (state->fe.dtv_property_cache.isdbt_partial_reception == 0) { // Sound Broadcasting mode 1 seg + + /* P_timf_alpha = (13-P_mode) , P_corm_alpha=6, P_corm_thres=0x40 alpha to check on board */ + dib8000_write_word(state, 32, ((13 - mode) << 12) | (6 << 8) | 0x40); + //dib8000_write_word(state, 32, (8 << 12) | (6 << 8) | 0x80); + + /* P_ctrl_sfreq_step= (12-P_mode) P_ctrl_sfreq_inh =0 P_ctrl_pha_off_max */ + ret |= dib8000_write_word(state, 37, (12 - mode) | ((5 + mode) << 5)); + + } else { // Sound Broadcasting mode 3 seg + + /* P_timf_alpha = (12-P_mode) , P_corm_alpha=6, P_corm_thres=0x60 alpha to check on board */ + dib8000_write_word(state, 32, ((12 - mode) << 12) | (6 << 8) | 0x60); + + ret |= dib8000_write_word(state, 37, (11 - mode) | ((5 + mode) << 5)); + } + + } else { // 13 seg + /* P_timf_alpha = 8 , P_corm_alpha=6, P_corm_thres=0x80 alpha to check on board */ + dib8000_write_word(state, 32, ((11 - mode) << 12) | (6 << 8) | 0x80); + + ret |= dib8000_write_word(state, 37, (10 - mode) | ((5 + mode) << 5)); + + } + + // we achieved a coff_cpil_lock - it's time to update the timf + if ((dib8000_read_word(state, 568) >> 11) & 0x1) + dib8000_update_timf(state); + + //now that tune is finished, lock0 should lock on fec_mpeg to output this lock on MP_LOCK. It's changed in autosearch start + dib8000_write_word(state, 6, 0x200); + + if (state->revision == 0x8002) { + value = dib8000_read_word(state, 903); + dib8000_write_word(state, 903, value & ~(1 << 3)); + msleep(1); + dib8000_write_word(state, 903, value | (1 << 3)); + } + + return ret; +} + +static int dib8000_wakeup(struct dvb_frontend *fe) +{ + struct dib8000_state *state = fe->demodulator_priv; + + dib8000_set_power_mode(state, DIB8000M_POWER_ALL); + dib8000_set_adc_state(state, DIBX000_ADC_ON); + if (dib8000_set_adc_state(state, DIBX000_SLOW_ADC_ON) != 0) + dprintk("could not start Slow ADC"); + + return 0; +} + +static int dib8000_sleep(struct dvb_frontend *fe) +{ + struct dib8000_state *st = fe->demodulator_priv; + if (1) { + dib8000_set_output_mode(st, OUTMODE_HIGH_Z); + dib8000_set_power_mode(st, DIB8000M_POWER_INTERFACE_ONLY); + return dib8000_set_adc_state(st, DIBX000_SLOW_ADC_OFF) | dib8000_set_adc_state(st, DIBX000_ADC_OFF); + } else { + + return 0; + } +} + +static int dib8000_get_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 i, val = 0; + + fe->dtv_property_cache.bandwidth_hz = 6000000; + + fe->dtv_property_cache.isdbt_sb_mode = dib8000_read_word(state, 508) & 0x1; + + val = dib8000_read_word(state, 570); + fe->dtv_property_cache.inversion = (val & 0x40) >> 6; + switch ((val & 0x30) >> 4) { + case 1: + fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_2K; + break; + case 3: + default: + fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_8K; + break; + } + + switch (val & 0x3) { + case 0: + fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_32; + dprintk("dib8000_get_frontend GI = 1/32 "); + break; + case 1: + fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_16; + dprintk("dib8000_get_frontend GI = 1/16 "); + break; + case 2: + dprintk("dib8000_get_frontend GI = 1/8 "); + fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_8; + break; + case 3: + dprintk("dib8000_get_frontend GI = 1/4 "); + fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_1_4; + break; + } + + val = dib8000_read_word(state, 505); + fe->dtv_property_cache.isdbt_partial_reception = val & 1; + dprintk("dib8000_get_frontend : partial_reception = %d ", fe->dtv_property_cache.isdbt_partial_reception); + + for (i = 0; i < 3; i++) { + val = dib8000_read_word(state, 493 + i); + fe->dtv_property_cache.layer[i].segment_count = val & 0x0F; + dprintk("dib8000_get_frontend : Layer %d segments = %d ", i, fe->dtv_property_cache.layer[i].segment_count); + + val = dib8000_read_word(state, 499 + i); + fe->dtv_property_cache.layer[i].interleaving = val & 0x3; + dprintk("dib8000_get_frontend : Layer %d time_intlv = %d ", i, fe->dtv_property_cache.layer[i].interleaving); + + val = dib8000_read_word(state, 481 + i); + switch (val & 0x7) { + case 1: + fe->dtv_property_cache.layer[i].fec = FEC_1_2; + dprintk("dib8000_get_frontend : Layer %d Code Rate = 1/2 ", i); + break; + case 2: + fe->dtv_property_cache.layer[i].fec = FEC_2_3; + dprintk("dib8000_get_frontend : Layer %d Code Rate = 2/3 ", i); + break; + case 3: + fe->dtv_property_cache.layer[i].fec = FEC_3_4; + dprintk("dib8000_get_frontend : Layer %d Code Rate = 3/4 ", i); + break; + case 5: + fe->dtv_property_cache.layer[i].fec = FEC_5_6; + dprintk("dib8000_get_frontend : Layer %d Code Rate = 5/6 ", i); + break; + default: + fe->dtv_property_cache.layer[i].fec = FEC_7_8; + dprintk("dib8000_get_frontend : Layer %d Code Rate = 7/8 ", i); + break; + } + + val = dib8000_read_word(state, 487 + i); + switch (val & 0x3) { + case 0: + dprintk("dib8000_get_frontend : Layer %d DQPSK ", i); + fe->dtv_property_cache.layer[i].modulation = DQPSK; + break; + case 1: + fe->dtv_property_cache.layer[i].modulation = QPSK; + dprintk("dib8000_get_frontend : Layer %d QPSK ", i); + break; + case 2: + fe->dtv_property_cache.layer[i].modulation = QAM_16; + dprintk("dib8000_get_frontend : Layer %d QAM16 ", i); + break; + case 3: + default: + dprintk("dib8000_get_frontend : Layer %d QAM64 ", i); + fe->dtv_property_cache.layer[i].modulation = QAM_64; + break; + } + } + return 0; +} + +static int dib8000_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep) +{ + struct dib8000_state *state = fe->demodulator_priv; + int time, ret; + + dib8000_set_output_mode(state, OUTMODE_HIGH_Z); + + if (fe->ops.tuner_ops.set_params) + fe->ops.tuner_ops.set_params(fe, fep); + + /* start up the AGC */ + state->tune_state = CT_AGC_START; + do { + time = dib8000_agc_startup(fe); + if (time != FE_CALLBACK_TIME_NEVER) + msleep(time / 10); + else + break; + } while (state->tune_state != CT_AGC_STOP); + + if (state->fe.dtv_property_cache.frequency == 0) { + dprintk("dib8000: must at least specify frequency "); + return 0; + } + + if (state->fe.dtv_property_cache.bandwidth_hz == 0) { + dprintk("dib8000: no bandwidth specified, set to default "); + state->fe.dtv_property_cache.bandwidth_hz = 6000000; + } + + state->tune_state = CT_DEMOD_START; + + if ((state->fe.dtv_property_cache.delivery_system != SYS_ISDBT) || + (state->fe.dtv_property_cache.inversion == INVERSION_AUTO) || + (state->fe.dtv_property_cache.transmission_mode == TRANSMISSION_MODE_AUTO) || + (state->fe.dtv_property_cache.guard_interval == GUARD_INTERVAL_AUTO) || + (((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 0)) != 0) && + (state->fe.dtv_property_cache.layer[0].segment_count != 0xff) && + (state->fe.dtv_property_cache.layer[0].segment_count != 0) && + ((state->fe.dtv_property_cache.layer[0].modulation == QAM_AUTO) || + (state->fe.dtv_property_cache.layer[0].fec == FEC_AUTO))) || + (((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 1)) != 0) && + (state->fe.dtv_property_cache.layer[1].segment_count != 0xff) && + (state->fe.dtv_property_cache.layer[1].segment_count != 0) && + ((state->fe.dtv_property_cache.layer[1].modulation == QAM_AUTO) || + (state->fe.dtv_property_cache.layer[1].fec == FEC_AUTO))) || + (((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 2)) != 0) && + (state->fe.dtv_property_cache.layer[2].segment_count != 0xff) && + (state->fe.dtv_property_cache.layer[2].segment_count != 0) && + ((state->fe.dtv_property_cache.layer[2].modulation == QAM_AUTO) || + (state->fe.dtv_property_cache.layer[2].fec == FEC_AUTO))) || + (((state->fe.dtv_property_cache.layer[0].segment_count == 0) || + ((state->fe.dtv_property_cache.isdbt_layer_enabled & (1 << 0)) == 0)) && + ((state->fe.dtv_property_cache.layer[1].segment_count == 0) || + ((state->fe.dtv_property_cache.isdbt_layer_enabled & (2 << 0)) == 0)) && + ((state->fe.dtv_property_cache.layer[2].segment_count == 0) || ((state->fe.dtv_property_cache.isdbt_layer_enabled & (3 << 0)) == 0)))) { + int i = 800, found; + + dib8000_set_bandwidth(state, fe->dtv_property_cache.bandwidth_hz / 1000); + dib8000_autosearch_start(fe); + do { + msleep(10); + found = dib8000_autosearch_irq(fe); + } while (found == 0 && i--); + + dprintk("Frequency %d Hz, autosearch returns: %d", fep->frequency, found); + + if (found == 0 || found == 1) + return 0; // no channel found + + dib8000_get_frontend(fe, fep); + } + + ret = dib8000_tune(fe); + + /* make this a config parameter */ + dib8000_set_output_mode(state, state->cfg.output_mode); + + return ret; +} + +static int dib8000_read_status(struct dvb_frontend *fe, fe_status_t * stat) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 lock = dib8000_read_word(state, 568); + + *stat = 0; + + if ((lock >> 14) & 1) // AGC + *stat |= FE_HAS_SIGNAL; + + if ((lock >> 8) & 1) // Equal + *stat |= FE_HAS_CARRIER; + + if ((lock >> 3) & 1) // TMCC_SYNC + *stat |= FE_HAS_SYNC; + + if ((lock >> 5) & 7) // FEC MPEG + *stat |= FE_HAS_LOCK; + + lock = dib8000_read_word(state, 554); // Viterbi Layer A + if (lock & 0x01) + *stat |= FE_HAS_VITERBI; + + lock = dib8000_read_word(state, 555); // Viterbi Layer B + if (lock & 0x01) + *stat |= FE_HAS_VITERBI; + + lock = dib8000_read_word(state, 556); // Viterbi Layer C + if (lock & 0x01) + *stat |= FE_HAS_VITERBI; + + return 0; +} + +static int dib8000_read_ber(struct dvb_frontend *fe, u32 * ber) +{ + struct dib8000_state *state = fe->demodulator_priv; + *ber = (dib8000_read_word(state, 560) << 16) | dib8000_read_word(state, 561); // 13 segments + return 0; +} + +static int dib8000_read_unc_blocks(struct dvb_frontend *fe, u32 * unc) +{ + struct dib8000_state *state = fe->demodulator_priv; + *unc = dib8000_read_word(state, 565); // packet error on 13 seg + return 0; +} + +static int dib8000_read_signal_strength(struct dvb_frontend *fe, u16 * strength) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 val = dib8000_read_word(state, 390); + *strength = 65535 - val; + return 0; +} + +static int dib8000_read_snr(struct dvb_frontend *fe, u16 * snr) +{ + struct dib8000_state *state = fe->demodulator_priv; + u16 val; + s32 signal_mant, signal_exp, noise_mant, noise_exp; + u32 result = 0; + + val = dib8000_read_word(state, 542); + noise_mant = (val >> 6) & 0xff; + noise_exp = (val & 0x3f); + + val = dib8000_read_word(state, 543); + signal_mant = (val >> 6) & 0xff; + signal_exp = (val & 0x3f); + + if ((noise_exp & 0x20) != 0) + noise_exp -= 0x40; + if ((signal_exp & 0x20) != 0) + signal_exp -= 0x40; + + if (signal_mant != 0) + result = intlog10(2) * 10 * signal_exp + 10 * intlog10(signal_mant); + else + result = intlog10(2) * 10 * signal_exp - 100; + if (noise_mant != 0) + result -= intlog10(2) * 10 * noise_exp + 10 * intlog10(noise_mant); + else + result -= intlog10(2) * 10 * noise_exp - 100; + + *snr = result / (1 << 24); + return 0; +} + +int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr) +{ + int k = 0; + u8 new_addr = 0; + struct i2c_device client = {.adap = host }; + + for (k = no_of_demods - 1; k >= 0; k--) { + /* designated i2c address */ + new_addr = first_addr + (k << 1); + + client.addr = new_addr; + dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */ + if (dib8000_identify(&client) == 0) { + dib8000_i2c_write16(&client, 1287, 0x0003); /* sram lead in, rdy */ + client.addr = default_addr; + if (dib8000_identify(&client) == 0) { + dprintk("#%d: not identified", k); + return -EINVAL; + } + } + + /* start diversity to pull_down div_str - just for i2c-enumeration */ + dib8000_i2c_write16(&client, 1286, (1 << 10) | (4 << 6)); + + /* set new i2c address and force divstart */ + dib8000_i2c_write16(&client, 1285, (new_addr << 2) | 0x2); + client.addr = new_addr; + dib8000_identify(&client); + + dprintk("IC %d initialized (to i2c_address 0x%x)", k, new_addr); + } + + for (k = 0; k < no_of_demods; k++) { + new_addr = first_addr | (k << 1); + client.addr = new_addr; + + // unforce divstr + dib8000_i2c_write16(&client, 1285, new_addr << 2); + + /* deactivate div - it was just for i2c-enumeration */ + dib8000_i2c_write16(&client, 1286, 0); + } + + return 0; +} + +EXPORT_SYMBOL(dib8000_i2c_enumeration); +static int dib8000_fe_get_tune_settings(struct dvb_frontend *fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + tune->step_size = 0; + tune->max_drift = 0; + return 0; +} + +static void dib8000_release(struct dvb_frontend *fe) +{ + struct dib8000_state *st = fe->demodulator_priv; + dibx000_exit_i2c_master(&st->i2c_master); + kfree(st); +} + +struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface intf, int gating) +{ + struct dib8000_state *st = fe->demodulator_priv; + return dibx000_get_i2c_adapter(&st->i2c_master, intf, gating); +} + +EXPORT_SYMBOL(dib8000_get_i2c_master); + +static const struct dvb_frontend_ops dib8000_ops = { + .info = { + .name = "DiBcom 8000 ISDB-T", + .type = FE_OFDM, + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 62500, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER | FE_CAN_HIERARCHY_AUTO, + }, + + .release = dib8000_release, + + .init = dib8000_wakeup, + .sleep = dib8000_sleep, + + .set_frontend = dib8000_set_frontend, + .get_tune_settings = dib8000_fe_get_tune_settings, + .get_frontend = dib8000_get_frontend, + + .read_status = dib8000_read_status, + .read_ber = dib8000_read_ber, + .read_signal_strength = dib8000_read_signal_strength, + .read_snr = dib8000_read_snr, + .read_ucblocks = dib8000_read_unc_blocks, +}; + +struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg) +{ + struct dvb_frontend *fe; + struct dib8000_state *state; + + dprintk("dib8000_attach"); + + state = kzalloc(sizeof(struct dib8000_state), GFP_KERNEL); + if (state == NULL) + return NULL; + + memcpy(&state->cfg, cfg, sizeof(struct dib8000_config)); + state->i2c.adap = i2c_adap; + state->i2c.addr = i2c_addr; + state->gpio_val = cfg->gpio_val; + state->gpio_dir = cfg->gpio_dir; + + /* Ensure the output mode remains at the previous default if it's + * not specifically set by the caller. + */ + if ((state->cfg.output_mode != OUTMODE_MPEG2_SERIAL) && (state->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK)) + state->cfg.output_mode = OUTMODE_MPEG2_FIFO; + + fe = &state->fe; + fe->demodulator_priv = state; + memcpy(&state->fe.ops, &dib8000_ops, sizeof(struct dvb_frontend_ops)); + + state->timf_default = cfg->pll->timf; + + if (dib8000_identify(&state->i2c) == 0) + goto error; + + dibx000_init_i2c_master(&state->i2c_master, DIB8000, state->i2c.adap, state->i2c.addr); + + dib8000_reset(fe); + + dib8000_write_word(state, 285, (dib8000_read_word(state, 285) & ~0x60) | (3 << 5)); /* ber_rs_len = 3 */ + + return fe; + + error: + kfree(state); + return NULL; +} + +EXPORT_SYMBOL(dib8000_attach); + +MODULE_AUTHOR("Olivier Grenie <Olivier.Grenie@dibcom.fr, " "Patrick Boettcher <pboettcher@dibcom.fr>"); +MODULE_DESCRIPTION("Driver for the DiBcom 8000 ISDB-T demodulator"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/frontends/dib8000.h b/drivers/media/dvb/frontends/dib8000.h new file mode 100644 index 00000000000..a86de340dd5 --- /dev/null +++ b/drivers/media/dvb/frontends/dib8000.h @@ -0,0 +1,79 @@ +#ifndef DIB8000_H +#define DIB8000_H + +#include "dibx000_common.h" + +struct dib8000_config { + u8 output_mpeg2_in_188_bytes; + u8 hostbus_diversity; + u8 tuner_is_baseband; + int (*update_lna) (struct dvb_frontend *, u16 agc_global); + + u8 agc_config_count; + struct dibx000_agc_config *agc; + struct dibx000_bandwidth_config *pll; + +#define DIB8000_GPIO_DEFAULT_DIRECTIONS 0xffff + u16 gpio_dir; +#define DIB8000_GPIO_DEFAULT_VALUES 0x0000 + u16 gpio_val; +#define DIB8000_GPIO_PWM_POS0(v) ((v & 0xf) << 12) +#define DIB8000_GPIO_PWM_POS1(v) ((v & 0xf) << 8 ) +#define DIB8000_GPIO_PWM_POS2(v) ((v & 0xf) << 4 ) +#define DIB8000_GPIO_PWM_POS3(v) (v & 0xf) +#define DIB8000_GPIO_DEFAULT_PWM_POS 0xffff + u16 gpio_pwm_pos; + u16 pwm_freq_div; + + void (*agc_control) (struct dvb_frontend *, u8 before); + + u16 drives; + u16 diversity_delay; + u8 div_cfg; + u8 output_mode; + u8 refclksel; +}; + +#define DEFAULT_DIB8000_I2C_ADDRESS 18 + +#if defined(CONFIG_DVB_DIB8000) || (defined(CONFIG_DVB_DIB8000_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg); +extern struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); + +extern int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr); + +extern int dib8000_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val); +extern int dib8000_set_wbd_ref(struct dvb_frontend *, u16 value); +#else +static inline struct dvb_frontend *dib8000_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib8000_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +static inline struct i2c_adapter *dib8000_get_i2c_master(struct dvb_frontend *fe, enum dibx000_i2c_interface i, int x) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} + +int dib8000_i2c_enumeration(struct i2c_adapter *host, int no_of_demods, u8 default_addr, u8 first_addr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +int dib8000_set_gpio(struct dvb_frontend *fe, u8 num, u8 dir, u8 val) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} + +int dib8000_set_wbd_ref(struct dvb_frontend *fe, u16 value) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return -ENODEV; +} +#endif + +#endif diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb/frontends/dibx000_common.c index 315e09e95b0..4efca30d212 100644 --- a/drivers/media/dvb/frontends/dibx000_common.c +++ b/drivers/media/dvb/frontends/dibx000_common.c @@ -15,29 +15,31 @@ static int dibx000_write_word(struct dibx000_i2c_master *mst, u16 reg, u16 val) (val >> 8) & 0xff, val & 0xff, }; struct i2c_msg msg = { - .addr = mst->i2c_addr, .flags = 0, .buf = b, .len = 4 + .addr = mst->i2c_addr,.flags = 0,.buf = b,.len = 4 }; return i2c_transfer(mst->i2c_adap, &msg, 1) != 1 ? -EREMOTEIO : 0; } -static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst, enum dibx000_i2c_interface intf) +static int dibx000_i2c_select_interface(struct dibx000_i2c_master *mst, + enum dibx000_i2c_interface intf) { if (mst->device_rev > DIB3000MC && mst->selected_interface != intf) { - dprintk("selecting interface: %d\n",intf); + dprintk("selecting interface: %d\n", intf); mst->selected_interface = intf; return dibx000_write_word(mst, mst->base_reg + 4, intf); } return 0; } -static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4], u8 addr, int onoff) +static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4], + u8 addr, int onoff) { u16 val; if (onoff) - val = addr << 8; // bit 7 = use master or not, if 0, the gate is open + val = addr << 8; // bit 7 = use master or not, if 0, the gate is open else val = 1 << 7; @@ -45,7 +47,7 @@ static int dibx000_i2c_gate_ctrl(struct dibx000_i2c_master *mst, u8 tx[4], u8 ad val <<= 1; tx[0] = (((mst->base_reg + 1) >> 8) & 0xff); - tx[1] = ( (mst->base_reg + 1) & 0xff); + tx[1] = ((mst->base_reg + 1) & 0xff); tx[2] = val >> 8; tx[3] = val & 0xff; @@ -57,59 +59,78 @@ static u32 dibx000_i2c_func(struct i2c_adapter *adapter) return I2C_FUNC_I2C; } -static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msg[], int num) +static int dibx000_i2c_gated_tuner_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msg[], int num) { struct dibx000_i2c_master *mst = i2c_get_adapdata(i2c_adap); struct i2c_msg m[2 + num]; u8 tx_open[4], tx_close[4]; - memset(m,0, sizeof(struct i2c_msg) * (2 + num)); + memset(m, 0, sizeof(struct i2c_msg) * (2 + num)); dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER); - dibx000_i2c_gate_ctrl(mst, tx_open, msg[0].addr, 1); + dibx000_i2c_gate_ctrl(mst, tx_open, msg[0].addr, 1); m[0].addr = mst->i2c_addr; - m[0].buf = tx_open; - m[0].len = 4; + m[0].buf = tx_open; + m[0].len = 4; memcpy(&m[1], msg, sizeof(struct i2c_msg) * num); dibx000_i2c_gate_ctrl(mst, tx_close, 0, 0); - m[num+1].addr = mst->i2c_addr; - m[num+1].buf = tx_close; - m[num+1].len = 4; + m[num + 1].addr = mst->i2c_addr; + m[num + 1].buf = tx_close; + m[num + 1].len = 4; - return i2c_transfer(mst->i2c_adap, m, 2+num) == 2 + num ? num : -EIO; + return i2c_transfer(mst->i2c_adap, m, 2 + num) == 2 + num ? num : -EIO; } static struct i2c_algorithm dibx000_i2c_gated_tuner_algo = { - .master_xfer = dibx000_i2c_gated_tuner_xfer, + .master_xfer = dibx000_i2c_gated_tuner_xfer, .functionality = dibx000_i2c_func, }; -struct i2c_adapter * dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst, enum dibx000_i2c_interface intf, int gating) +struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst, + enum dibx000_i2c_interface intf, + int gating) { struct i2c_adapter *i2c = NULL; switch (intf) { - case DIBX000_I2C_INTERFACE_TUNER: - if (gating) - i2c = &mst->gated_tuner_i2c_adap; - break; - default: - printk(KERN_ERR "DiBX000: incorrect I2C interface selected\n"); - break; + case DIBX000_I2C_INTERFACE_TUNER: + if (gating) + i2c = &mst->gated_tuner_i2c_adap; + break; + default: + printk(KERN_ERR "DiBX000: incorrect I2C interface selected\n"); + break; } return i2c; } + EXPORT_SYMBOL(dibx000_get_i2c_adapter); -static int i2c_adapter_init(struct i2c_adapter *i2c_adap, struct i2c_algorithm *algo, const char *name, struct dibx000_i2c_master *mst) +void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst) +{ + /* initialize the i2c-master by closing the gate */ + u8 tx[4]; + struct i2c_msg m = {.addr = mst->i2c_addr,.buf = tx,.len = 4 }; + + dibx000_i2c_gate_ctrl(mst, tx, 0, 0); + i2c_transfer(mst->i2c_adap, &m, 1); + mst->selected_interface = 0xff; // the first time force a select of the I2C + dibx000_i2c_select_interface(mst, DIBX000_I2C_INTERFACE_TUNER); +} + +EXPORT_SYMBOL(dibx000_reset_i2c_master); + +static int i2c_adapter_init(struct i2c_adapter *i2c_adap, + struct i2c_algorithm *algo, const char *name, + struct dibx000_i2c_master *mst) { strncpy(i2c_adap->name, name, sizeof(i2c_adap->name)); - i2c_adap->class = I2C_CLASS_TV_DIGITAL, - i2c_adap->algo = algo; + i2c_adap->class = I2C_CLASS_TV_DIGITAL, i2c_adap->algo = algo; i2c_adap->algo_data = NULL; i2c_set_adapdata(i2c_adap, mst); if (i2c_add_adapter(i2c_adap) < 0) @@ -117,34 +138,40 @@ static int i2c_adapter_init(struct i2c_adapter *i2c_adap, struct i2c_algorithm * return 0; } -int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev, struct i2c_adapter *i2c_adap, u8 i2c_addr) +int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev, + struct i2c_adapter *i2c_adap, u8 i2c_addr) { u8 tx[4]; - struct i2c_msg m = { .addr = i2c_addr >> 1, .buf = tx, .len = 4 }; + struct i2c_msg m = {.addr = i2c_addr >> 1,.buf = tx,.len = 4 }; mst->device_rev = device_rev; - mst->i2c_adap = i2c_adap; - mst->i2c_addr = i2c_addr >> 1; + mst->i2c_adap = i2c_adap; + mst->i2c_addr = i2c_addr >> 1; - if (device_rev == DIB7000P) + if (device_rev == DIB7000P || device_rev == DIB8000) mst->base_reg = 1024; else mst->base_reg = 768; - if (i2c_adapter_init(&mst->gated_tuner_i2c_adap, &dibx000_i2c_gated_tuner_algo, "DiBX000 tuner I2C bus", mst) != 0) - printk(KERN_ERR "DiBX000: could not initialize the tuner i2c_adapter\n"); + if (i2c_adapter_init + (&mst->gated_tuner_i2c_adap, &dibx000_i2c_gated_tuner_algo, + "DiBX000 tuner I2C bus", mst) != 0) + printk(KERN_ERR + "DiBX000: could not initialize the tuner i2c_adapter\n"); /* initialize the i2c-master by closing the gate */ dibx000_i2c_gate_ctrl(mst, tx, 0, 0); return i2c_transfer(i2c_adap, &m, 1) == 1; } + EXPORT_SYMBOL(dibx000_init_i2c_master); void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst) { i2c_del_adapter(&mst->gated_tuner_i2c_adap); } + EXPORT_SYMBOL(dibx000_exit_i2c_master); MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>"); diff --git a/drivers/media/dvb/frontends/dibx000_common.h b/drivers/media/dvb/frontends/dibx000_common.h index 84e4d536292..5be10eca07c 100644 --- a/drivers/media/dvb/frontends/dibx000_common.h +++ b/drivers/media/dvb/frontends/dibx000_common.h @@ -2,7 +2,7 @@ #define DIBX000_COMMON_H enum dibx000_i2c_interface { - DIBX000_I2C_INTERFACE_TUNER = 0, + DIBX000_I2C_INTERFACE_TUNER = 0, DIBX000_I2C_INTERFACE_GPIO_1_2 = 1, DIBX000_I2C_INTERFACE_GPIO_3_4 = 2 }; @@ -12,22 +12,29 @@ struct dibx000_i2c_master { #define DIB7000 2 #define DIB7000P 11 #define DIB7000MC 12 +#define DIB8000 13 u16 device_rev; enum dibx000_i2c_interface selected_interface; -// struct i2c_adapter tuner_i2c_adap; - struct i2c_adapter gated_tuner_i2c_adap; +// struct i2c_adapter tuner_i2c_adap; + struct i2c_adapter gated_tuner_i2c_adap; struct i2c_adapter *i2c_adap; - u8 i2c_addr; + u8 i2c_addr; u16 base_reg; }; -extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, u16 device_rev, struct i2c_adapter *i2c_adap, u8 i2c_addr); -extern struct i2c_adapter * dibx000_get_i2c_adapter(struct dibx000_i2c_master *mst, enum dibx000_i2c_interface intf, int gating); +extern int dibx000_init_i2c_master(struct dibx000_i2c_master *mst, + u16 device_rev, struct i2c_adapter *i2c_adap, + u8 i2c_addr); +extern struct i2c_adapter *dibx000_get_i2c_adapter(struct dibx000_i2c_master + *mst, + enum dibx000_i2c_interface + intf, int gating); extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst); +extern void dibx000_reset_i2c_master(struct dibx000_i2c_master *mst); #define BAND_LBAND 0x01 #define BAND_UHF 0x02 @@ -41,18 +48,18 @@ extern void dibx000_exit_i2c_master(struct dibx000_i2c_master *mst); (freq_kHz) <= 2000000 ? BAND_LBAND : BAND_SBAND ) struct dibx000_agc_config { - /* defines the capabilities of this AGC-setting - using the BAND_-defines*/ - u8 band_caps; + /* defines the capabilities of this AGC-setting - using the BAND_-defines */ + u8 band_caps; u16 setup; u16 inv_gain; u16 time_stabiliz; - u8 alpha_level; + u8 alpha_level; u16 thlock; - u8 wbd_inv; + u8 wbd_inv; u16 wbd_ref; u8 wbd_sel; u8 wbd_alpha; @@ -92,8 +99,8 @@ struct dibx000_agc_config { }; struct dibx000_bandwidth_config { - u32 internal; - u32 sampling; + u32 internal; + u32 sampling; u8 pll_prediv; u8 pll_ratio; diff --git a/drivers/media/dvb/frontends/lgdt3304.c b/drivers/media/dvb/frontends/lgdt3304.c index eb72a9866c9..e334b5d4e57 100644 --- a/drivers/media/dvb/frontends/lgdt3304.c +++ b/drivers/media/dvb/frontends/lgdt3304.c @@ -363,6 +363,8 @@ struct dvb_frontend* lgdt3304_attach(const struct lgdt3304_config *config, struct lgdt3304_state *state; state = kzalloc(sizeof(struct lgdt3304_state), GFP_KERNEL); + if (state == NULL) + return NULL; state->addr = config->i2c_address; state->i2c = i2c; diff --git a/drivers/media/dvb/frontends/s921_module.c b/drivers/media/dvb/frontends/s921_module.c index 3f5a0e1dfdf..3156b64cfc9 100644 --- a/drivers/media/dvb/frontends/s921_module.c +++ b/drivers/media/dvb/frontends/s921_module.c @@ -169,6 +169,8 @@ struct dvb_frontend* s921_attach(const struct s921_config *config, struct s921_state *state; state = kzalloc(sizeof(struct s921_state), GFP_KERNEL); + if (state == NULL) + return NULL; state->addr = config->i2c_address; state->i2c = i2c; diff --git a/drivers/media/dvb/pt1/Kconfig b/drivers/media/dvb/pt1/Kconfig new file mode 100644 index 00000000000..24501d5bf70 --- /dev/null +++ b/drivers/media/dvb/pt1/Kconfig @@ -0,0 +1,12 @@ +config DVB_PT1 + tristate "PT1 cards" + depends on DVB_CORE && PCI && I2C + help + Support for Earthsoft PT1 PCI cards. + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the PCI bus, so you need + an external software decoder to watch TV on your computer. + + Say Y or M if you own such a device and want to use it. + diff --git a/drivers/media/dvb/pt1/Makefile b/drivers/media/dvb/pt1/Makefile new file mode 100644 index 00000000000..a66da17bbe3 --- /dev/null +++ b/drivers/media/dvb/pt1/Makefile @@ -0,0 +1,5 @@ +earth-pt1-objs := pt1.o va1j5jf8007s.o va1j5jf8007t.o + +obj-$(CONFIG_DVB_PT1) += earth-pt1.o + +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core -Idrivers/media/dvb/frontends diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c new file mode 100644 index 00000000000..81e623a90f0 --- /dev/null +++ b/drivers/media/dvb/pt1/pt1.c @@ -0,0 +1,1057 @@ +/* + * driver for Earthsoft PT1 + * + * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info> + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa <tomy@users.sourceforge.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/vmalloc.h> +#include <linux/pci.h> +#include <linux/kthread.h> +#include <linux/freezer.h> + +#include "dvbdev.h" +#include "dvb_demux.h" +#include "dmxdev.h" +#include "dvb_net.h" +#include "dvb_frontend.h" + +#include "va1j5jf8007t.h" +#include "va1j5jf8007s.h" + +#define DRIVER_NAME "earth-pt1" + +#define PT1_PAGE_SHIFT 12 +#define PT1_PAGE_SIZE (1 << PT1_PAGE_SHIFT) +#define PT1_NR_UPACKETS 1024 +#define PT1_NR_BUFS 511 + +struct pt1_buffer_page { + __le32 upackets[PT1_NR_UPACKETS]; +}; + +struct pt1_table_page { + __le32 next_pfn; + __le32 buf_pfns[PT1_NR_BUFS]; +}; + +struct pt1_buffer { + struct pt1_buffer_page *page; + dma_addr_t addr; +}; + +struct pt1_table { + struct pt1_table_page *page; + dma_addr_t addr; + struct pt1_buffer bufs[PT1_NR_BUFS]; +}; + +#define PT1_NR_ADAPS 4 + +struct pt1_adapter; + +struct pt1 { + struct pci_dev *pdev; + void __iomem *regs; + struct i2c_adapter i2c_adap; + int i2c_running; + struct pt1_adapter *adaps[PT1_NR_ADAPS]; + struct pt1_table *tables; + struct task_struct *kthread; +}; + +struct pt1_adapter { + struct pt1 *pt1; + int index; + + u8 *buf; + int upacket_count; + int packet_count; + + struct dvb_adapter adap; + struct dvb_demux demux; + int users; + struct dmxdev dmxdev; + struct dvb_net net; + struct dvb_frontend *fe; + int (*orig_set_voltage)(struct dvb_frontend *fe, + fe_sec_voltage_t voltage); +}; + +#define pt1_printk(level, pt1, format, arg...) \ + dev_printk(level, &(pt1)->pdev->dev, format, ##arg) + +static void pt1_write_reg(struct pt1 *pt1, int reg, u32 data) +{ + writel(data, pt1->regs + reg * 4); +} + +static u32 pt1_read_reg(struct pt1 *pt1, int reg) +{ + return readl(pt1->regs + reg * 4); +} + +static int pt1_nr_tables = 64; +module_param_named(nr_tables, pt1_nr_tables, int, 0); + +static void pt1_increment_table_count(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x00000020); +} + +static void pt1_init_table_count(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x00000010); +} + +static void pt1_register_tables(struct pt1 *pt1, u32 first_pfn) +{ + pt1_write_reg(pt1, 5, first_pfn); + pt1_write_reg(pt1, 0, 0x0c000040); +} + +static void pt1_unregister_tables(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x08080000); +} + +static int pt1_sync(struct pt1 *pt1) +{ + int i; + for (i = 0; i < 57; i++) { + if (pt1_read_reg(pt1, 0) & 0x20000000) + return 0; + pt1_write_reg(pt1, 0, 0x00000008); + } + pt1_printk(KERN_ERR, pt1, "could not sync\n"); + return -EIO; +} + +static u64 pt1_identify(struct pt1 *pt1) +{ + int i; + u64 id; + id = 0; + for (i = 0; i < 57; i++) { + id |= (u64)(pt1_read_reg(pt1, 0) >> 30 & 1) << i; + pt1_write_reg(pt1, 0, 0x00000008); + } + return id; +} + +static int pt1_unlock(struct pt1 *pt1) +{ + int i; + pt1_write_reg(pt1, 0, 0x00000008); + for (i = 0; i < 3; i++) { + if (pt1_read_reg(pt1, 0) & 0x80000000) + return 0; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not unlock\n"); + return -EIO; +} + +static int pt1_reset_pci(struct pt1 *pt1) +{ + int i; + pt1_write_reg(pt1, 0, 0x01010000); + pt1_write_reg(pt1, 0, 0x01000000); + for (i = 0; i < 10; i++) { + if (pt1_read_reg(pt1, 0) & 0x00000001) + return 0; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not reset PCI\n"); + return -EIO; +} + +static int pt1_reset_ram(struct pt1 *pt1) +{ + int i; + pt1_write_reg(pt1, 0, 0x02020000); + pt1_write_reg(pt1, 0, 0x02000000); + for (i = 0; i < 10; i++) { + if (pt1_read_reg(pt1, 0) & 0x00000002) + return 0; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not reset RAM\n"); + return -EIO; +} + +static int pt1_do_enable_ram(struct pt1 *pt1) +{ + int i, j; + u32 status; + status = pt1_read_reg(pt1, 0) & 0x00000004; + pt1_write_reg(pt1, 0, 0x00000002); + for (i = 0; i < 10; i++) { + for (j = 0; j < 1024; j++) { + if ((pt1_read_reg(pt1, 0) & 0x00000004) != status) + return 0; + } + schedule_timeout_uninterruptible((HZ + 999) / 1000); + } + pt1_printk(KERN_ERR, pt1, "could not enable RAM\n"); + return -EIO; +} + +static int pt1_enable_ram(struct pt1 *pt1) +{ + int i, ret; + schedule_timeout_uninterruptible((HZ + 999) / 1000); + for (i = 0; i < 10; i++) { + ret = pt1_do_enable_ram(pt1); + if (ret < 0) + return ret; + } + return 0; +} + +static void pt1_disable_ram(struct pt1 *pt1) +{ + pt1_write_reg(pt1, 0, 0x0b0b0000); +} + +static void pt1_set_stream(struct pt1 *pt1, int index, int enabled) +{ + pt1_write_reg(pt1, 2, 1 << (index + 8) | enabled << index); +} + +static void pt1_init_streams(struct pt1 *pt1) +{ + int i; + for (i = 0; i < PT1_NR_ADAPS; i++) + pt1_set_stream(pt1, i, 0); +} + +static int pt1_filter(struct pt1 *pt1, struct pt1_buffer_page *page) +{ + u32 upacket; + int i; + int index; + struct pt1_adapter *adap; + int offset; + u8 *buf; + + if (!page->upackets[PT1_NR_UPACKETS - 1]) + return 0; + + for (i = 0; i < PT1_NR_UPACKETS; i++) { + upacket = le32_to_cpu(page->upackets[i]); + index = (upacket >> 29) - 1; + if (index < 0 || index >= PT1_NR_ADAPS) + continue; + + adap = pt1->adaps[index]; + if (upacket >> 25 & 1) + adap->upacket_count = 0; + else if (!adap->upacket_count) + continue; + + buf = adap->buf; + offset = adap->packet_count * 188 + adap->upacket_count * 3; + buf[offset] = upacket >> 16; + buf[offset + 1] = upacket >> 8; + if (adap->upacket_count != 62) + buf[offset + 2] = upacket; + + if (++adap->upacket_count >= 63) { + adap->upacket_count = 0; + if (++adap->packet_count >= 21) { + dvb_dmx_swfilter_packets(&adap->demux, buf, 21); + adap->packet_count = 0; + } + } + } + + page->upackets[PT1_NR_UPACKETS - 1] = 0; + return 1; +} + +static int pt1_thread(void *data) +{ + struct pt1 *pt1; + int table_index; + int buf_index; + struct pt1_buffer_page *page; + + pt1 = data; + set_freezable(); + + table_index = 0; + buf_index = 0; + + while (!kthread_should_stop()) { + try_to_freeze(); + + page = pt1->tables[table_index].bufs[buf_index].page; + if (!pt1_filter(pt1, page)) { + schedule_timeout_interruptible((HZ + 999) / 1000); + continue; + } + + if (++buf_index >= PT1_NR_BUFS) { + pt1_increment_table_count(pt1); + buf_index = 0; + if (++table_index >= pt1_nr_tables) + table_index = 0; + } + } + + return 0; +} + +static void pt1_free_page(struct pt1 *pt1, void *page, dma_addr_t addr) +{ + dma_free_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, page, addr); +} + +static void *pt1_alloc_page(struct pt1 *pt1, dma_addr_t *addrp, u32 *pfnp) +{ + void *page; + dma_addr_t addr; + + page = dma_alloc_coherent(&pt1->pdev->dev, PT1_PAGE_SIZE, &addr, + GFP_KERNEL); + if (page == NULL) + return NULL; + + BUG_ON(addr & (PT1_PAGE_SIZE - 1)); + BUG_ON(addr >> PT1_PAGE_SHIFT >> 31 >> 1); + + *addrp = addr; + *pfnp = addr >> PT1_PAGE_SHIFT; + return page; +} + +static void pt1_cleanup_buffer(struct pt1 *pt1, struct pt1_buffer *buf) +{ + pt1_free_page(pt1, buf->page, buf->addr); +} + +static int +pt1_init_buffer(struct pt1 *pt1, struct pt1_buffer *buf, u32 *pfnp) +{ + struct pt1_buffer_page *page; + dma_addr_t addr; + + page = pt1_alloc_page(pt1, &addr, pfnp); + if (page == NULL) + return -ENOMEM; + + page->upackets[PT1_NR_UPACKETS - 1] = 0; + + buf->page = page; + buf->addr = addr; + return 0; +} + +static void pt1_cleanup_table(struct pt1 *pt1, struct pt1_table *table) +{ + int i; + + for (i = 0; i < PT1_NR_BUFS; i++) + pt1_cleanup_buffer(pt1, &table->bufs[i]); + + pt1_free_page(pt1, table->page, table->addr); +} + +static int +pt1_init_table(struct pt1 *pt1, struct pt1_table *table, u32 *pfnp) +{ + struct pt1_table_page *page; + dma_addr_t addr; + int i, ret; + u32 buf_pfn; + + page = pt1_alloc_page(pt1, &addr, pfnp); + if (page == NULL) + return -ENOMEM; + + for (i = 0; i < PT1_NR_BUFS; i++) { + ret = pt1_init_buffer(pt1, &table->bufs[i], &buf_pfn); + if (ret < 0) + goto err; + + page->buf_pfns[i] = cpu_to_le32(buf_pfn); + } + + pt1_increment_table_count(pt1); + table->page = page; + table->addr = addr; + return 0; + +err: + while (i--) + pt1_cleanup_buffer(pt1, &table->bufs[i]); + + pt1_free_page(pt1, page, addr); + return ret; +} + +static void pt1_cleanup_tables(struct pt1 *pt1) +{ + struct pt1_table *tables; + int i; + + tables = pt1->tables; + pt1_unregister_tables(pt1); + + for (i = 0; i < pt1_nr_tables; i++) + pt1_cleanup_table(pt1, &tables[i]); + + vfree(tables); +} + +static int pt1_init_tables(struct pt1 *pt1) +{ + struct pt1_table *tables; + int i, ret; + u32 first_pfn, pfn; + + tables = vmalloc(sizeof(struct pt1_table) * pt1_nr_tables); + if (tables == NULL) + return -ENOMEM; + + pt1_init_table_count(pt1); + + i = 0; + if (pt1_nr_tables) { + ret = pt1_init_table(pt1, &tables[0], &first_pfn); + if (ret) + goto err; + i++; + } + + while (i < pt1_nr_tables) { + ret = pt1_init_table(pt1, &tables[i], &pfn); + if (ret) + goto err; + tables[i - 1].page->next_pfn = cpu_to_le32(pfn); + i++; + } + + tables[pt1_nr_tables - 1].page->next_pfn = cpu_to_le32(first_pfn); + + pt1_register_tables(pt1, first_pfn); + pt1->tables = tables; + return 0; + +err: + while (i--) + pt1_cleanup_table(pt1, &tables[i]); + + vfree(tables); + return ret; +} + +static int pt1_start_feed(struct dvb_demux_feed *feed) +{ + struct pt1_adapter *adap; + adap = container_of(feed->demux, struct pt1_adapter, demux); + if (!adap->users++) + pt1_set_stream(adap->pt1, adap->index, 1); + return 0; +} + +static int pt1_stop_feed(struct dvb_demux_feed *feed) +{ + struct pt1_adapter *adap; + adap = container_of(feed->demux, struct pt1_adapter, demux); + if (!--adap->users) + pt1_set_stream(adap->pt1, adap->index, 0); + return 0; +} + +static void +pt1_set_power(struct pt1 *pt1, int power, int lnb, int reset) +{ + pt1_write_reg(pt1, 1, power | lnb << 1 | !reset << 3); +} + +static int pt1_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + struct pt1_adapter *adap; + int lnb; + + adap = container_of(fe->dvb, struct pt1_adapter, adap); + + switch (voltage) { + case SEC_VOLTAGE_13: /* actually 11V */ + lnb = 2; + break; + case SEC_VOLTAGE_18: /* actually 15V */ + lnb = 3; + break; + case SEC_VOLTAGE_OFF: + lnb = 0; + break; + default: + return -EINVAL; + } + + pt1_set_power(adap->pt1, 1, lnb, 0); + + if (adap->orig_set_voltage) + return adap->orig_set_voltage(fe, voltage); + else + return 0; +} + +static void pt1_free_adapter(struct pt1_adapter *adap) +{ + dvb_unregister_frontend(adap->fe); + dvb_net_release(&adap->net); + adap->demux.dmx.close(&adap->demux.dmx); + dvb_dmxdev_release(&adap->dmxdev); + dvb_dmx_release(&adap->demux); + dvb_unregister_adapter(&adap->adap); + free_page((unsigned long)adap->buf); + kfree(adap); +} + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static struct pt1_adapter * +pt1_alloc_adapter(struct pt1 *pt1, struct dvb_frontend *fe) +{ + struct pt1_adapter *adap; + void *buf; + struct dvb_adapter *dvb_adap; + struct dvb_demux *demux; + struct dmxdev *dmxdev; + int ret; + + adap = kzalloc(sizeof(struct pt1_adapter), GFP_KERNEL); + if (!adap) { + ret = -ENOMEM; + goto err; + } + + adap->pt1 = pt1; + + adap->orig_set_voltage = fe->ops.set_voltage; + fe->ops.set_voltage = pt1_set_voltage; + + buf = (u8 *)__get_free_page(GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto err_kfree; + } + + adap->buf = buf; + adap->upacket_count = 0; + adap->packet_count = 0; + + dvb_adap = &adap->adap; + dvb_adap->priv = adap; + ret = dvb_register_adapter(dvb_adap, DRIVER_NAME, THIS_MODULE, + &pt1->pdev->dev, adapter_nr); + if (ret < 0) + goto err_free_page; + + demux = &adap->demux; + demux->dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; + demux->priv = adap; + demux->feednum = 256; + demux->filternum = 256; + demux->start_feed = pt1_start_feed; + demux->stop_feed = pt1_stop_feed; + demux->write_to_decoder = NULL; + ret = dvb_dmx_init(demux); + if (ret < 0) + goto err_unregister_adapter; + + dmxdev = &adap->dmxdev; + dmxdev->filternum = 256; + dmxdev->demux = &demux->dmx; + dmxdev->capabilities = 0; + ret = dvb_dmxdev_init(dmxdev, dvb_adap); + if (ret < 0) + goto err_dmx_release; + + dvb_net_init(dvb_adap, &adap->net, &demux->dmx); + + ret = dvb_register_frontend(dvb_adap, fe); + if (ret < 0) + goto err_net_release; + adap->fe = fe; + + return adap; + +err_net_release: + dvb_net_release(&adap->net); + adap->demux.dmx.close(&adap->demux.dmx); + dvb_dmxdev_release(&adap->dmxdev); +err_dmx_release: + dvb_dmx_release(demux); +err_unregister_adapter: + dvb_unregister_adapter(dvb_adap); +err_free_page: + free_page((unsigned long)buf); +err_kfree: + kfree(adap); +err: + return ERR_PTR(ret); +} + +static void pt1_cleanup_adapters(struct pt1 *pt1) +{ + int i; + for (i = 0; i < PT1_NR_ADAPS; i++) + pt1_free_adapter(pt1->adaps[i]); +} + +struct pt1_config { + struct va1j5jf8007s_config va1j5jf8007s_config; + struct va1j5jf8007t_config va1j5jf8007t_config; +}; + +static const struct pt1_config pt1_configs[2] = { + { + { .demod_address = 0x1b }, + { .demod_address = 0x1a }, + }, { + { .demod_address = 0x19 }, + { .demod_address = 0x18 }, + }, +}; + +static int pt1_init_adapters(struct pt1 *pt1) +{ + int i, j; + struct i2c_adapter *i2c_adap; + const struct pt1_config *config; + struct dvb_frontend *fe[4]; + struct pt1_adapter *adap; + int ret; + + i = 0; + j = 0; + + i2c_adap = &pt1->i2c_adap; + do { + config = &pt1_configs[i / 2]; + + fe[i] = va1j5jf8007s_attach(&config->va1j5jf8007s_config, + i2c_adap); + if (!fe[i]) { + ret = -ENODEV; /* This does not sound nice... */ + goto err; + } + i++; + + fe[i] = va1j5jf8007t_attach(&config->va1j5jf8007t_config, + i2c_adap); + if (!fe[i]) { + ret = -ENODEV; + goto err; + } + i++; + + ret = va1j5jf8007s_prepare(fe[i - 2]); + if (ret < 0) + goto err; + + ret = va1j5jf8007t_prepare(fe[i - 1]); + if (ret < 0) + goto err; + + } while (i < 4); + + do { + adap = pt1_alloc_adapter(pt1, fe[j]); + if (IS_ERR(adap)) + goto err; + adap->index = j; + pt1->adaps[j] = adap; + } while (++j < 4); + + return 0; + +err: + while (i-- > j) + fe[i]->ops.release(fe[i]); + + while (j--) + pt1_free_adapter(pt1->adaps[j]); + + return ret; +} + +static void pt1_i2c_emit(struct pt1 *pt1, int addr, int busy, int read_enable, + int clock, int data, int next_addr) +{ + pt1_write_reg(pt1, 4, addr << 18 | busy << 13 | read_enable << 12 | + !clock << 11 | !data << 10 | next_addr); +} + +static void pt1_i2c_write_bit(struct pt1 *pt1, int addr, int *addrp, int data) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 0, data, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, data, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, data, addr + 3); + *addrp = addr + 3; +} + +static void pt1_i2c_read_bit(struct pt1 *pt1, int addr, int *addrp) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 0, 1, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 1, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 1, 1, 1, addr + 3); + pt1_i2c_emit(pt1, addr + 3, 1, 0, 0, 1, addr + 4); + *addrp = addr + 4; +} + +static void pt1_i2c_write_byte(struct pt1 *pt1, int addr, int *addrp, int data) +{ + int i; + for (i = 0; i < 8; i++) + pt1_i2c_write_bit(pt1, addr, &addr, data >> (7 - i) & 1); + pt1_i2c_write_bit(pt1, addr, &addr, 1); + *addrp = addr; +} + +static void pt1_i2c_read_byte(struct pt1 *pt1, int addr, int *addrp, int last) +{ + int i; + for (i = 0; i < 8; i++) + pt1_i2c_read_bit(pt1, addr, &addr); + pt1_i2c_write_bit(pt1, addr, &addr, last); + *addrp = addr; +} + +static void pt1_i2c_prepare(struct pt1 *pt1, int addr, int *addrp) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 1, 1, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 0, 0, 0, addr + 3); + *addrp = addr + 3; +} + +static void +pt1_i2c_write_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg) +{ + int i; + pt1_i2c_prepare(pt1, addr, &addr); + pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1); + for (i = 0; i < msg->len; i++) + pt1_i2c_write_byte(pt1, addr, &addr, msg->buf[i]); + *addrp = addr; +} + +static void +pt1_i2c_read_msg(struct pt1 *pt1, int addr, int *addrp, struct i2c_msg *msg) +{ + int i; + pt1_i2c_prepare(pt1, addr, &addr); + pt1_i2c_write_byte(pt1, addr, &addr, msg->addr << 1 | 1); + for (i = 0; i < msg->len; i++) + pt1_i2c_read_byte(pt1, addr, &addr, i == msg->len - 1); + *addrp = addr; +} + +static int pt1_i2c_end(struct pt1 *pt1, int addr) +{ + pt1_i2c_emit(pt1, addr, 1, 0, 0, 0, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2); + pt1_i2c_emit(pt1, addr + 2, 1, 0, 1, 1, 0); + + pt1_write_reg(pt1, 0, 0x00000004); + do { + if (signal_pending(current)) + return -EINTR; + schedule_timeout_interruptible((HZ + 999) / 1000); + } while (pt1_read_reg(pt1, 0) & 0x00000080); + return 0; +} + +static void pt1_i2c_begin(struct pt1 *pt1, int *addrp) +{ + int addr; + addr = 0; + + pt1_i2c_emit(pt1, addr, 0, 0, 1, 1, addr /* itself */); + addr = addr + 1; + + if (!pt1->i2c_running) { + pt1_i2c_emit(pt1, addr, 1, 0, 1, 1, addr + 1); + pt1_i2c_emit(pt1, addr + 1, 1, 0, 1, 0, addr + 2); + addr = addr + 2; + pt1->i2c_running = 1; + } + *addrp = addr; +} + +static int pt1_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct pt1 *pt1; + int i; + struct i2c_msg *msg, *next_msg; + int addr, ret; + u16 len; + u32 word; + + pt1 = i2c_get_adapdata(adap); + + for (i = 0; i < num; i++) { + msg = &msgs[i]; + if (msg->flags & I2C_M_RD) + return -ENOTSUPP; + + if (i + 1 < num) + next_msg = &msgs[i + 1]; + else + next_msg = NULL; + + if (next_msg && next_msg->flags & I2C_M_RD) { + i++; + + len = next_msg->len; + if (len > 4) + return -ENOTSUPP; + + pt1_i2c_begin(pt1, &addr); + pt1_i2c_write_msg(pt1, addr, &addr, msg); + pt1_i2c_read_msg(pt1, addr, &addr, next_msg); + ret = pt1_i2c_end(pt1, addr); + if (ret < 0) + return ret; + + word = pt1_read_reg(pt1, 2); + while (len--) { + next_msg->buf[len] = word; + word >>= 8; + } + } else { + pt1_i2c_begin(pt1, &addr); + pt1_i2c_write_msg(pt1, addr, &addr, msg); + ret = pt1_i2c_end(pt1, addr); + if (ret < 0) + return ret; + } + } + + return num; +} + +static u32 pt1_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static const struct i2c_algorithm pt1_i2c_algo = { + .master_xfer = pt1_i2c_xfer, + .functionality = pt1_i2c_func, +}; + +static void pt1_i2c_wait(struct pt1 *pt1) +{ + int i; + for (i = 0; i < 128; i++) + pt1_i2c_emit(pt1, 0, 0, 0, 1, 1, 0); +} + +static void pt1_i2c_init(struct pt1 *pt1) +{ + int i; + for (i = 0; i < 1024; i++) + pt1_i2c_emit(pt1, i, 0, 0, 1, 1, 0); +} + +static void __devexit pt1_remove(struct pci_dev *pdev) +{ + struct pt1 *pt1; + void __iomem *regs; + + pt1 = pci_get_drvdata(pdev); + regs = pt1->regs; + + kthread_stop(pt1->kthread); + pt1_cleanup_tables(pt1); + pt1_cleanup_adapters(pt1); + pt1_disable_ram(pt1); + pt1_set_power(pt1, 0, 0, 1); + i2c_del_adapter(&pt1->i2c_adap); + pci_set_drvdata(pdev, NULL); + kfree(pt1); + pci_iounmap(pdev, regs); + pci_release_regions(pdev); + pci_disable_device(pdev); +} + +static int __devinit +pt1_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int ret; + void __iomem *regs; + struct pt1 *pt1; + struct i2c_adapter *i2c_adap; + struct task_struct *kthread; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto err; + + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret < 0) + goto err_pci_disable_device; + + pci_set_master(pdev); + + ret = pci_request_regions(pdev, DRIVER_NAME); + if (ret < 0) + goto err_pci_disable_device; + + regs = pci_iomap(pdev, 0, 0); + if (!regs) { + ret = -EIO; + goto err_pci_release_regions; + } + + pt1 = kzalloc(sizeof(struct pt1), GFP_KERNEL); + if (!pt1) { + ret = -ENOMEM; + goto err_pci_iounmap; + } + + pt1->pdev = pdev; + pt1->regs = regs; + pci_set_drvdata(pdev, pt1); + + i2c_adap = &pt1->i2c_adap; + i2c_adap->class = I2C_CLASS_TV_DIGITAL; + i2c_adap->algo = &pt1_i2c_algo; + i2c_adap->algo_data = NULL; + i2c_adap->dev.parent = &pdev->dev; + i2c_set_adapdata(i2c_adap, pt1); + ret = i2c_add_adapter(i2c_adap); + if (ret < 0) + goto err_kfree; + + pt1_set_power(pt1, 0, 0, 1); + + pt1_i2c_init(pt1); + pt1_i2c_wait(pt1); + + ret = pt1_sync(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + pt1_identify(pt1); + + ret = pt1_unlock(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + ret = pt1_reset_pci(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + ret = pt1_reset_ram(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + ret = pt1_enable_ram(pt1); + if (ret < 0) + goto err_i2c_del_adapter; + + pt1_init_streams(pt1); + + pt1_set_power(pt1, 1, 0, 1); + schedule_timeout_uninterruptible((HZ + 49) / 50); + + pt1_set_power(pt1, 1, 0, 0); + schedule_timeout_uninterruptible((HZ + 999) / 1000); + + ret = pt1_init_adapters(pt1); + if (ret < 0) + goto err_pt1_disable_ram; + + ret = pt1_init_tables(pt1); + if (ret < 0) + goto err_pt1_cleanup_adapters; + + kthread = kthread_run(pt1_thread, pt1, "pt1"); + if (IS_ERR(kthread)) { + ret = PTR_ERR(kthread); + goto err_pt1_cleanup_tables; + } + + pt1->kthread = kthread; + return 0; + +err_pt1_cleanup_tables: + pt1_cleanup_tables(pt1); +err_pt1_cleanup_adapters: + pt1_cleanup_adapters(pt1); +err_pt1_disable_ram: + pt1_disable_ram(pt1); + pt1_set_power(pt1, 0, 0, 1); +err_i2c_del_adapter: + i2c_del_adapter(i2c_adap); +err_kfree: + pci_set_drvdata(pdev, NULL); + kfree(pt1); +err_pci_iounmap: + pci_iounmap(pdev, regs); +err_pci_release_regions: + pci_release_regions(pdev); +err_pci_disable_device: + pci_disable_device(pdev); +err: + return ret; + +} + +static struct pci_device_id pt1_id_table[] = { + { PCI_DEVICE(0x10ee, 0x211a) }, + { }, +}; +MODULE_DEVICE_TABLE(pci, pt1_id_table); + +static struct pci_driver pt1_driver = { + .name = DRIVER_NAME, + .probe = pt1_probe, + .remove = __devexit_p(pt1_remove), + .id_table = pt1_id_table, +}; + + +static int __init pt1_init(void) +{ + return pci_register_driver(&pt1_driver); +} + + +static void __exit pt1_cleanup(void) +{ + pci_unregister_driver(&pt1_driver); +} + +module_init(pt1_init); +module_exit(pt1_cleanup); + +MODULE_AUTHOR("Takahito HIRANO <hiranotaka@zng.info>"); +MODULE_DESCRIPTION("Earthsoft PT1 Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/pt1/va1j5jf8007s.c b/drivers/media/dvb/pt1/va1j5jf8007s.c new file mode 100644 index 00000000000..2db940f8635 --- /dev/null +++ b/drivers/media/dvb/pt1/va1j5jf8007s.c @@ -0,0 +1,658 @@ +/* + * ISDB-S driver for VA1J5JF8007 + * + * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info> + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa <tomy@users.sourceforge.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include "dvb_frontend.h" +#include "va1j5jf8007s.h" + +enum va1j5jf8007s_tune_state { + VA1J5JF8007S_IDLE, + VA1J5JF8007S_SET_FREQUENCY_1, + VA1J5JF8007S_SET_FREQUENCY_2, + VA1J5JF8007S_SET_FREQUENCY_3, + VA1J5JF8007S_CHECK_FREQUENCY, + VA1J5JF8007S_SET_MODULATION, + VA1J5JF8007S_CHECK_MODULATION, + VA1J5JF8007S_SET_TS_ID, + VA1J5JF8007S_CHECK_TS_ID, + VA1J5JF8007S_TRACK, +}; + +struct va1j5jf8007s_state { + const struct va1j5jf8007s_config *config; + struct i2c_adapter *adap; + struct dvb_frontend fe; + enum va1j5jf8007s_tune_state tune_state; +}; + +static int va1j5jf8007s_get_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_HW; +} + +static int +va1j5jf8007s_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct va1j5jf8007s_state *state; + + state = fe->demodulator_priv; + + switch (state->tune_state) { + case VA1J5JF8007S_IDLE: + case VA1J5JF8007S_SET_FREQUENCY_1: + case VA1J5JF8007S_SET_FREQUENCY_2: + case VA1J5JF8007S_SET_FREQUENCY_3: + case VA1J5JF8007S_CHECK_FREQUENCY: + *status = 0; + return 0; + + + case VA1J5JF8007S_SET_MODULATION: + case VA1J5JF8007S_CHECK_MODULATION: + *status |= FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007S_SET_TS_ID: + case VA1J5JF8007S_CHECK_TS_ID: + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER; + return 0; + + case VA1J5JF8007S_TRACK: + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + } + + BUG(); +} + +struct va1j5jf8007s_cb_map { + u32 frequency; + u8 cb; +}; + +static const struct va1j5jf8007s_cb_map va1j5jf8007s_cb_maps[] = { + { 986000, 0xb2 }, + { 1072000, 0xd2 }, + { 1154000, 0xe2 }, + { 1291000, 0x20 }, + { 1447000, 0x40 }, + { 1615000, 0x60 }, + { 1791000, 0x80 }, + { 1972000, 0xa0 }, +}; + +static u8 va1j5jf8007s_lookup_cb(u32 frequency) +{ + int i; + const struct va1j5jf8007s_cb_map *map; + + for (i = 0; i < ARRAY_SIZE(va1j5jf8007s_cb_maps); i++) { + map = &va1j5jf8007s_cb_maps[i]; + if (frequency < map->frequency) + return map->cb; + } + return 0xc0; +} + +static int va1j5jf8007s_set_frequency_1(struct va1j5jf8007s_state *state) +{ + u32 frequency; + u16 word; + u8 buf[6]; + struct i2c_msg msg; + + frequency = state->fe.dtv_property_cache.frequency; + + word = (frequency + 500) / 1000; + if (frequency < 1072000) + word = (word << 1 & ~0x1f) | (word & 0x0f); + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0x40 | word >> 8; + buf[3] = word; + buf[4] = 0xe0; + buf[5] = va1j5jf8007s_lookup_cb(frequency); + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_set_frequency_2(struct va1j5jf8007s_state *state) +{ + u8 buf[3]; + struct i2c_msg msg; + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0xe4; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_set_frequency_3(struct va1j5jf8007s_state *state) +{ + u32 frequency; + u8 buf[4]; + struct i2c_msg msg; + + frequency = state->fe.dtv_property_cache.frequency; + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0xf4; + buf[3] = va1j5jf8007s_lookup_cb(frequency) | 0x4; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007s_check_frequency(struct va1j5jf8007s_state *state, int *lock) +{ + u8 addr; + u8 write_buf[2], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0xfe; + write_buf[1] = 0xc1; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = read_buf[0] & 0x40; + return 0; +} + +static int va1j5jf8007s_set_modulation(struct va1j5jf8007s_state *state) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x03; + buf[1] = 0x01; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007s_check_modulation(struct va1j5jf8007s_state *state, int *lock) +{ + u8 addr; + u8 write_buf[1], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0xc3; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = !(read_buf[0] & 0x10); + return 0; +} + +static int +va1j5jf8007s_set_ts_id(struct va1j5jf8007s_state *state) +{ + u32 ts_id; + u8 buf[3]; + struct i2c_msg msg; + + ts_id = state->fe.dtv_property_cache.isdbs_ts_id; + if (!ts_id) + return 0; + + buf[0] = 0x8f; + buf[1] = ts_id >> 8; + buf[2] = ts_id; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007s_check_ts_id(struct va1j5jf8007s_state *state, int *lock) +{ + u8 addr; + u8 write_buf[1], read_buf[2]; + struct i2c_msg msgs[2]; + u32 ts_id; + + ts_id = state->fe.dtv_property_cache.isdbs_ts_id; + if (!ts_id) { + *lock = 1; + return 0; + } + + addr = state->config->demod_address; + + write_buf[0] = 0xe6; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = (read_buf[0] << 8 | read_buf[1]) == ts_id; + return 0; +} + +static int +va1j5jf8007s_tune(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params, + unsigned int mode_flags, unsigned int *delay, + fe_status_t *status) +{ + struct va1j5jf8007s_state *state; + int ret; + int lock; + + state = fe->demodulator_priv; + + if (params != NULL) + state->tune_state = VA1J5JF8007S_SET_FREQUENCY_1; + + switch (state->tune_state) { + case VA1J5JF8007S_IDLE: + *delay = 3 * HZ; + *status = 0; + return 0; + + case VA1J5JF8007S_SET_FREQUENCY_1: + ret = va1j5jf8007s_set_frequency_1(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_SET_FREQUENCY_2; + *delay = 0; + *status = 0; + return 0; + + case VA1J5JF8007S_SET_FREQUENCY_2: + ret = va1j5jf8007s_set_frequency_2(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_SET_FREQUENCY_3; + *delay = (HZ + 99) / 100; + *status = 0; + return 0; + + case VA1J5JF8007S_SET_FREQUENCY_3: + ret = va1j5jf8007s_set_frequency_3(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_CHECK_FREQUENCY; + *delay = 0; + *status = 0; + return 0; + + case VA1J5JF8007S_CHECK_FREQUENCY: + ret = va1j5jf8007s_check_frequency(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 999) / 1000; + *status = 0; + return 0; + } + + state->tune_state = VA1J5JF8007S_SET_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007S_SET_MODULATION: + ret = va1j5jf8007s_set_modulation(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_CHECK_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007S_CHECK_MODULATION: + ret = va1j5jf8007s_check_modulation(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 49) / 50; + *status = FE_HAS_SIGNAL; + return 0; + } + + state->tune_state = VA1J5JF8007S_SET_TS_ID; + *delay = 0; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER; + return 0; + + case VA1J5JF8007S_SET_TS_ID: + ret = va1j5jf8007s_set_ts_id(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007S_CHECK_TS_ID; + return 0; + + case VA1J5JF8007S_CHECK_TS_ID: + ret = va1j5jf8007s_check_ts_id(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 99) / 100; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER; + return 0; + } + + state->tune_state = VA1J5JF8007S_TRACK; + /* fall through */ + + case VA1J5JF8007S_TRACK: + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + } + + BUG(); +} + +static int va1j5jf8007s_init_frequency(struct va1j5jf8007s_state *state) +{ + u8 buf[4]; + struct i2c_msg msg; + + buf[0] = 0xfe; + buf[1] = 0xc0; + buf[2] = 0xf0; + buf[3] = 0x04; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_set_sleep(struct va1j5jf8007s_state *state, int sleep) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x17; + buf[1] = sleep ? 0x01 : 0x00; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007s_sleep(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + int ret; + + state = fe->demodulator_priv; + + ret = va1j5jf8007s_init_frequency(state); + if (ret < 0) + return ret; + + return va1j5jf8007s_set_sleep(state, 1); +} + +static int va1j5jf8007s_init(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + + state = fe->demodulator_priv; + state->tune_state = VA1J5JF8007S_IDLE; + + return va1j5jf8007s_set_sleep(state, 0); +} + +static void va1j5jf8007s_release(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops va1j5jf8007s_ops = { + .info = { + .name = "VA1J5JF8007 ISDB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 1000, + .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO | + FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO, + }, + + .get_frontend_algo = va1j5jf8007s_get_frontend_algo, + .read_status = va1j5jf8007s_read_status, + .tune = va1j5jf8007s_tune, + .sleep = va1j5jf8007s_sleep, + .init = va1j5jf8007s_init, + .release = va1j5jf8007s_release, +}; + +static int va1j5jf8007s_prepare_1(struct va1j5jf8007s_state *state) +{ + u8 addr; + u8 write_buf[1], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0x07; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + if (read_buf[0] != 0x41) + return -EIO; + + return 0; +} + +static const u8 va1j5jf8007s_prepare_bufs[][2] = { + {0x04, 0x02}, {0x0d, 0x55}, {0x11, 0x40}, {0x13, 0x80}, {0x17, 0x01}, + {0x1c, 0x0a}, {0x1d, 0xaa}, {0x1e, 0x20}, {0x1f, 0x88}, {0x51, 0xb0}, + {0x52, 0x89}, {0x53, 0xb3}, {0x5a, 0x2d}, {0x5b, 0xd3}, {0x85, 0x69}, + {0x87, 0x04}, {0x8e, 0x02}, {0xa3, 0xf7}, {0xa5, 0xc0}, +}; + +static int va1j5jf8007s_prepare_2(struct va1j5jf8007s_state *state) +{ + u8 addr; + u8 buf[2]; + struct i2c_msg msg; + int i; + + addr = state->config->demod_address; + + msg.addr = addr; + msg.flags = 0; + msg.len = 2; + msg.buf = buf; + for (i = 0; i < ARRAY_SIZE(va1j5jf8007s_prepare_bufs); i++) { + memcpy(buf, va1j5jf8007s_prepare_bufs[i], sizeof(buf)); + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + } + + return 0; +} + +/* must be called after va1j5jf8007t_attach */ +int va1j5jf8007s_prepare(struct dvb_frontend *fe) +{ + struct va1j5jf8007s_state *state; + int ret; + + state = fe->demodulator_priv; + + ret = va1j5jf8007s_prepare_1(state); + if (ret < 0) + return ret; + + ret = va1j5jf8007s_prepare_2(state); + if (ret < 0) + return ret; + + return va1j5jf8007s_init_frequency(state); +} + +struct dvb_frontend * +va1j5jf8007s_attach(const struct va1j5jf8007s_config *config, + struct i2c_adapter *adap) +{ + struct va1j5jf8007s_state *state; + struct dvb_frontend *fe; + u8 buf[2]; + struct i2c_msg msg; + + state = kzalloc(sizeof(struct va1j5jf8007s_state), GFP_KERNEL); + if (!state) + return NULL; + + state->config = config; + state->adap = adap; + + fe = &state->fe; + memcpy(&fe->ops, &va1j5jf8007s_ops, sizeof(struct dvb_frontend_ops)); + fe->demodulator_priv = state; + + buf[0] = 0x01; + buf[1] = 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) { + kfree(state); + return NULL; + } + + return fe; +} diff --git a/drivers/media/dvb/pt1/va1j5jf8007s.h b/drivers/media/dvb/pt1/va1j5jf8007s.h new file mode 100644 index 00000000000..aa228a81635 --- /dev/null +++ b/drivers/media/dvb/pt1/va1j5jf8007s.h @@ -0,0 +1,40 @@ +/* + * ISDB-S driver for VA1J5JF8007 + * + * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info> + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa <tomy@users.sourceforge.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef VA1J5JF8007S_H +#define VA1J5JF8007S_H + +struct va1j5jf8007s_config { + u8 demod_address; +}; + +struct i2c_adapter; + +struct dvb_frontend * +va1j5jf8007s_attach(const struct va1j5jf8007s_config *config, + struct i2c_adapter *adap); + +/* must be called after va1j5jf8007t_attach */ +int va1j5jf8007s_prepare(struct dvb_frontend *fe); + +#endif diff --git a/drivers/media/dvb/pt1/va1j5jf8007t.c b/drivers/media/dvb/pt1/va1j5jf8007t.c new file mode 100644 index 00000000000..71117f4ca7e --- /dev/null +++ b/drivers/media/dvb/pt1/va1j5jf8007t.c @@ -0,0 +1,468 @@ +/* + * ISDB-T driver for VA1J5JF8007 + * + * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info> + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa <tomy@users.sourceforge.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include "dvb_frontend.h" +#include "dvb_math.h" +#include "va1j5jf8007t.h" + +enum va1j5jf8007t_tune_state { + VA1J5JF8007T_IDLE, + VA1J5JF8007T_SET_FREQUENCY, + VA1J5JF8007T_CHECK_FREQUENCY, + VA1J5JF8007T_SET_MODULATION, + VA1J5JF8007T_CHECK_MODULATION, + VA1J5JF8007T_TRACK, + VA1J5JF8007T_ABORT, +}; + +struct va1j5jf8007t_state { + const struct va1j5jf8007t_config *config; + struct i2c_adapter *adap; + struct dvb_frontend fe; + enum va1j5jf8007t_tune_state tune_state; +}; + +static int va1j5jf8007t_get_frontend_algo(struct dvb_frontend *fe) +{ + return DVBFE_ALGO_HW; +} + +static int +va1j5jf8007t_read_status(struct dvb_frontend *fe, fe_status_t *status) +{ + struct va1j5jf8007t_state *state; + + state = fe->demodulator_priv; + + switch (state->tune_state) { + case VA1J5JF8007T_IDLE: + case VA1J5JF8007T_SET_FREQUENCY: + case VA1J5JF8007T_CHECK_FREQUENCY: + *status = 0; + return 0; + + + case VA1J5JF8007T_SET_MODULATION: + case VA1J5JF8007T_CHECK_MODULATION: + case VA1J5JF8007T_ABORT: + *status |= FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007T_TRACK: + *status |= FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + } + + BUG(); +} + +struct va1j5jf8007t_cb_map { + u32 frequency; + u8 cb; +}; + +static const struct va1j5jf8007t_cb_map va1j5jf8007t_cb_maps[] = { + { 90000000, 0x80 }, + { 140000000, 0x81 }, + { 170000000, 0xa1 }, + { 220000000, 0x62 }, + { 330000000, 0xa2 }, + { 402000000, 0xe2 }, + { 450000000, 0x64 }, + { 550000000, 0x84 }, + { 600000000, 0xa4 }, + { 700000000, 0xc4 }, +}; + +static u8 va1j5jf8007t_lookup_cb(u32 frequency) +{ + int i; + const struct va1j5jf8007t_cb_map *map; + + for (i = 0; i < ARRAY_SIZE(va1j5jf8007t_cb_maps); i++) { + map = &va1j5jf8007t_cb_maps[i]; + if (frequency < map->frequency) + return map->cb; + } + return 0xe4; +} + +static int va1j5jf8007t_set_frequency(struct va1j5jf8007t_state *state) +{ + u32 frequency; + u16 word; + u8 buf[6]; + struct i2c_msg msg; + + frequency = state->fe.dtv_property_cache.frequency; + + word = (frequency + 71428) / 142857 + 399; + buf[0] = 0xfe; + buf[1] = 0xc2; + buf[2] = word >> 8; + buf[3] = word; + buf[4] = 0x80; + buf[5] = va1j5jf8007t_lookup_cb(frequency); + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int +va1j5jf8007t_check_frequency(struct va1j5jf8007t_state *state, int *lock) +{ + u8 addr; + u8 write_buf[2], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0xfe; + write_buf[1] = 0xc3; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = read_buf[0] & 0x40; + return 0; +} + +static int va1j5jf8007t_set_modulation(struct va1j5jf8007t_state *state) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x01; + buf[1] = 0x40; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007t_check_modulation(struct va1j5jf8007t_state *state, + int *lock, int *retry) +{ + u8 addr; + u8 write_buf[1], read_buf[1]; + struct i2c_msg msgs[2]; + + addr = state->config->demod_address; + + write_buf[0] = 0x80; + + msgs[0].addr = addr; + msgs[0].flags = 0; + msgs[0].len = sizeof(write_buf); + msgs[0].buf = write_buf; + + msgs[1].addr = addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = sizeof(read_buf); + msgs[1].buf = read_buf; + + if (i2c_transfer(state->adap, msgs, 2) != 2) + return -EREMOTEIO; + + *lock = !(read_buf[0] & 0x10); + *retry = read_buf[0] & 0x80; + return 0; +} + +static int +va1j5jf8007t_tune(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params, + unsigned int mode_flags, unsigned int *delay, + fe_status_t *status) +{ + struct va1j5jf8007t_state *state; + int ret; + int lock, retry; + + state = fe->demodulator_priv; + + if (params != NULL) + state->tune_state = VA1J5JF8007T_SET_FREQUENCY; + + switch (state->tune_state) { + case VA1J5JF8007T_IDLE: + *delay = 3 * HZ; + *status = 0; + return 0; + + case VA1J5JF8007T_SET_FREQUENCY: + ret = va1j5jf8007t_set_frequency(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007T_CHECK_FREQUENCY; + *delay = 0; + *status = 0; + return 0; + + case VA1J5JF8007T_CHECK_FREQUENCY: + ret = va1j5jf8007t_check_frequency(state, &lock); + if (ret < 0) + return ret; + + if (!lock) { + *delay = (HZ + 999) / 1000; + *status = 0; + return 0; + } + + state->tune_state = VA1J5JF8007T_SET_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007T_SET_MODULATION: + ret = va1j5jf8007t_set_modulation(state); + if (ret < 0) + return ret; + + state->tune_state = VA1J5JF8007T_CHECK_MODULATION; + *delay = 0; + *status = FE_HAS_SIGNAL; + return 0; + + case VA1J5JF8007T_CHECK_MODULATION: + ret = va1j5jf8007t_check_modulation(state, &lock, &retry); + if (ret < 0) + return ret; + + if (!lock) { + if (!retry) { + state->tune_state = VA1J5JF8007T_ABORT; + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL; + return 0; + } + *delay = (HZ + 999) / 1000; + *status = FE_HAS_SIGNAL; + return 0; + } + + state->tune_state = VA1J5JF8007T_TRACK; + /* fall through */ + + case VA1J5JF8007T_TRACK: + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_LOCK; + return 0; + + case VA1J5JF8007T_ABORT: + *delay = 3 * HZ; + *status = FE_HAS_SIGNAL; + return 0; + } + + BUG(); +} + +static int va1j5jf8007t_init_frequency(struct va1j5jf8007t_state *state) +{ + u8 buf[7]; + struct i2c_msg msg; + + buf[0] = 0xfe; + buf[1] = 0xc2; + buf[2] = 0x01; + buf[3] = 0x8f; + buf[4] = 0xc1; + buf[5] = 0x80; + buf[6] = 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007t_set_sleep(struct va1j5jf8007t_state *state, int sleep) +{ + u8 buf[2]; + struct i2c_msg msg; + + buf[0] = 0x03; + buf[1] = sleep ? 0x90 : 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + + return 0; +} + +static int va1j5jf8007t_sleep(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + int ret; + + state = fe->demodulator_priv; + + ret = va1j5jf8007t_init_frequency(state); + if (ret < 0) + return ret; + + return va1j5jf8007t_set_sleep(state, 1); +} + +static int va1j5jf8007t_init(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + + state = fe->demodulator_priv; + state->tune_state = VA1J5JF8007T_IDLE; + + return va1j5jf8007t_set_sleep(state, 0); +} + +static void va1j5jf8007t_release(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops va1j5jf8007t_ops = { + .info = { + .name = "VA1J5JF8007 ISDB-T", + .type = FE_OFDM, + .frequency_min = 90000000, + .frequency_max = 770000000, + .frequency_stepsize = 142857, + .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_AUTO | + FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO, + }, + + .get_frontend_algo = va1j5jf8007t_get_frontend_algo, + .read_status = va1j5jf8007t_read_status, + .tune = va1j5jf8007t_tune, + .sleep = va1j5jf8007t_sleep, + .init = va1j5jf8007t_init, + .release = va1j5jf8007t_release, +}; + +static const u8 va1j5jf8007t_prepare_bufs[][2] = { + {0x03, 0x90}, {0x14, 0x8f}, {0x1c, 0x2a}, {0x1d, 0xa8}, {0x1e, 0xa2}, + {0x22, 0x83}, {0x31, 0x0d}, {0x32, 0xe0}, {0x39, 0xd3}, {0x3a, 0x00}, + {0x5c, 0x40}, {0x5f, 0x80}, {0x75, 0x02}, {0x76, 0x4e}, {0x77, 0x03}, + {0xef, 0x01} +}; + +int va1j5jf8007t_prepare(struct dvb_frontend *fe) +{ + struct va1j5jf8007t_state *state; + u8 buf[2]; + struct i2c_msg msg; + int i; + + state = fe->demodulator_priv; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + for (i = 0; i < ARRAY_SIZE(va1j5jf8007t_prepare_bufs); i++) { + memcpy(buf, va1j5jf8007t_prepare_bufs[i], sizeof(buf)); + if (i2c_transfer(state->adap, &msg, 1) != 1) + return -EREMOTEIO; + } + + return va1j5jf8007t_init_frequency(state); +} + +struct dvb_frontend * +va1j5jf8007t_attach(const struct va1j5jf8007t_config *config, + struct i2c_adapter *adap) +{ + struct va1j5jf8007t_state *state; + struct dvb_frontend *fe; + u8 buf[2]; + struct i2c_msg msg; + + state = kzalloc(sizeof(struct va1j5jf8007t_state), GFP_KERNEL); + if (!state) + return NULL; + + state->config = config; + state->adap = adap; + + fe = &state->fe; + memcpy(&fe->ops, &va1j5jf8007t_ops, sizeof(struct dvb_frontend_ops)); + fe->demodulator_priv = state; + + buf[0] = 0x01; + buf[1] = 0x80; + + msg.addr = state->config->demod_address; + msg.flags = 0; + msg.len = sizeof(buf); + msg.buf = buf; + + if (i2c_transfer(state->adap, &msg, 1) != 1) { + kfree(state); + return NULL; + } + + return fe; +} diff --git a/drivers/media/dvb/pt1/va1j5jf8007t.h b/drivers/media/dvb/pt1/va1j5jf8007t.h new file mode 100644 index 00000000000..ed49906f776 --- /dev/null +++ b/drivers/media/dvb/pt1/va1j5jf8007t.h @@ -0,0 +1,40 @@ +/* + * ISDB-T driver for VA1J5JF8007 + * + * Copyright (C) 2009 HIRANO Takahito <hiranotaka@zng.info> + * + * based on pt1dvr - http://pt1dvr.sourceforge.jp/ + * by Tomoaki Ishikawa <tomy@users.sourceforge.jp> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef VA1J5JF8007T_H +#define VA1J5JF8007T_H + +struct va1j5jf8007t_config { + u8 demod_address; +}; + +struct i2c_adapter; + +struct dvb_frontend * +va1j5jf8007t_attach(const struct va1j5jf8007t_config *config, + struct i2c_adapter *adap); + +/* must be called after va1j5jf8007s_attach */ +int va1j5jf8007t_prepare(struct dvb_frontend *fe); + +#endif diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c index bd9ab9d0d12..fa6a62369a7 100644 --- a/drivers/media/dvb/siano/smscoreapi.c +++ b/drivers/media/dvb/siano/smscoreapi.c @@ -1367,7 +1367,7 @@ int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level) &msg, sizeof(msg)); } -/* new GPIO managment implementation */ +/* new GPIO management implementation */ static int GetGpioPinParams(u32 PinNum, u32 *pTranslatedPinNum, u32 *pGroupNum, u32 *pGroupCfg) { diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h index f1108c64e89..eec18aaf551 100644 --- a/drivers/media/dvb/siano/smscoreapi.h +++ b/drivers/media/dvb/siano/smscoreapi.h @@ -657,12 +657,12 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev); extern void smscore_putbuffer(struct smscore_device_t *coredev, struct smscore_buffer_t *cb); -/* old GPIO managment */ +/* old GPIO management */ int smscore_configure_gpio(struct smscore_device_t *coredev, u32 pin, struct smscore_config_gpio *pinconfig); int smscore_set_gpio(struct smscore_device_t *coredev, u32 pin, int level); -/* new GPIO managment */ +/* new GPIO management */ extern int smscore_gpio_configure(struct smscore_device_t *coredev, u8 PinNum, struct smscore_gpio_config *pGpioConfig); extern int smscore_gpio_set_level(struct smscore_device_t *coredev, u8 PinNum, |