Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Pulled mainline in order to get the UAPI infrastructure already
merged before I pull in David Howells's UAPI trees for networking.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 245 insertions, 0 deletions

diff --git a/drivers/media/i2c/saa7191.h b/drivers/media/i2c/saa7191.h
new file mode 100644
index 00000000000..803c74d6066
--- /dev/null
+++ b/drivers/media/i2c/saa7191.h
@@ -0,0 +1,245 @@
+/*
+ *  saa7191.h - Philips SAA7191 video decoder driver
+ *
+ *  Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
+ *  Copyright (C) 2004,2005 Mikael Nousiainen <tmnousia@cc.hut.fi>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef _SAA7191_H_
+#define _SAA7191_H_
+
+/* Philips SAA7191 DMSD I2C bus address */
+#define SAA7191_ADDR		0x8a
+
+/* Register subaddresses. */
+#define SAA7191_REG_IDEL	0x00
+#define SAA7191_REG_HSYB	0x01
+#define SAA7191_REG_HSYS	0x02
+#define SAA7191_REG_HCLB	0x03
+#define SAA7191_REG_HCLS	0x04
+#define SAA7191_REG_HPHI	0x05
+#define SAA7191_REG_LUMA	0x06
+#define SAA7191_REG_HUEC	0x07
+#define SAA7191_REG_CKTQ	0x08 /* bits 3-7 */
+#define SAA7191_REG_CKTS	0x09 /* bits 3-7 */
+#define SAA7191_REG_PLSE	0x0a
+#define SAA7191_REG_SESE	0x0b
+#define SAA7191_REG_GAIN	0x0c
+#define SAA7191_REG_STDC	0x0d
+#define SAA7191_REG_IOCK	0x0e
+#define SAA7191_REG_CTL3	0x0f
+#define SAA7191_REG_CTL4	0x10
+#define SAA7191_REG_CHCV	0x11
+#define SAA7191_REG_HS6B	0x14
+#define SAA7191_REG_HS6S	0x15
+#define SAA7191_REG_HC6B	0x16
+#define SAA7191_REG_HC6S	0x17
+#define SAA7191_REG_HP6I	0x18
+#define SAA7191_REG_STATUS	0xff	/* not really a subaddress */
+
+/* Status Register definitions */
+#define SAA7191_STATUS_CODE	0x01	/* color detected flag */
+#define SAA7191_STATUS_FIDT	0x20	/* signal type 50/60 Hz */
+#define SAA7191_STATUS_HLCK	0x40	/* PLL unlocked(1)/locked(0) */
+#define SAA7191_STATUS_STTC	0x80	/* tv/vtr time constant */
+
+/* Luminance Control Register definitions */
+/* input mode select bit:
+ * 0=CVBS (chrominance trap active), 1=S-Video (trap bypassed) */
+#define SAA7191_LUMA_BYPS	0x80
+/* pre-filter (only when chrominance trap is active) */
+#define SAA7191_LUMA_PREF	0x40
+/* aperture bandpass to select different characteristics with maximums
+ * (bits 4-5) */
+#define SAA7191_LUMA_BPSS_MASK	0x30
+#define SAA7191_LUMA_BPSS_SHIFT	4
+#define SAA7191_LUMA_BPSS_3	0x30
+#define SAA7191_LUMA_BPSS_2	0x20
+#define SAA7191_LUMA_BPSS_1	0x10
+#define SAA7191_LUMA_BPSS_0	0x00
+/* coring range for high frequency components according to 8-bit luminance
+ * (bits 2-3)
+ * 0=coring off, n= (+-)n LSB */
+#define SAA7191_LUMA_CORI_MASK	0x0c
+#define SAA7191_LUMA_CORI_SHIFT	2
+#define SAA7191_LUMA_CORI_3	0x0c
+#define SAA7191_LUMA_CORI_2	0x08
+#define SAA7191_LUMA_CORI_1	0x04
+#define SAA7191_LUMA_CORI_0	0x00
+/* aperture bandpass filter weights high frequency components of luminance
+ * signal (bits 0-1)
+ * 0=factor 0, 1=0.25, 2=0.5, 3=1 */
+#define SAA7191_LUMA_APER_MASK	0x03
+#define SAA7191_LUMA_APER_SHIFT	0
+#define SAA7191_LUMA_APER_3	0x03
+#define SAA7191_LUMA_APER_2	0x02
+#define SAA7191_LUMA_APER_1	0x01
+#define SAA7191_LUMA_APER_0	0x00
+
+/* Chrominance Gain Control Settings Register definitions */
+/* colour on: 0=automatic colour-killer enabled, 1=forced colour on */
+#define SAA7191_GAIN_COLO	0x80
+/* chrominance gain control (AGC filter)
+ * 0=loop filter time constant slow, 1=medium, 2=fast, 3=actual gain */
+#define SAA7191_GAIN_LFIS_MASK	0x60
+#define SAA7191_GAIN_LFIS_SHIFT	5
+#define SAA7191_GAIN_LFIS_3	0x60
+#define SAA7191_GAIN_LFIS_2	0x40
+#define SAA7191_GAIN_LFIS_1	0x20
+#define SAA7191_GAIN_LFIS_0	0x00
+
+/* Standard/Mode Control Register definitions */
+/* tv/vtr mode bit: 0=TV mode (slow time constant),
+ * 1=VTR mode (fast time constant) */
+#define SAA7191_STDC_VTRC	0x80
+/* SAA7191B-specific functions enable (RTCO, ODD and GPSW0 outputs)
+ * 0=outputs set to high-impedance (circuit equals SAA7191), 1=enabled */
+#define SAA7191_STDC_NFEN	0x08
+/* HREF generation: 0=like SAA7191, 1=HREF is 8xLLC2 clocks earlier */
+#define SAA7191_STDC_HRMV	0x04
+/* general purpose switch 0
+ * (not used with VINO afaik) */
+#define SAA7191_STDC_GPSW0	0x02
+/* SECAM mode bit: 0=other standards, 1=SECAM */
+#define SAA7191_STDC_SECS	0x01
+
+/* I/O and Clock Control Register definitions */
+/* horizontal clock PLL: 0=PLL closed,
+ * 1=PLL circuit open and horizontal freq fixed */
+#define SAA7191_IOCK_HPLL	0x80
+/* colour-difference output enable (outputs UV0-UV7) */
+#define SAA7191_IOCK_OEDC	0x40
+/* H-sync output enable */
+#define SAA7191_IOCK_OEHS	0x20
+/* V-sync output enable */
+#define SAA7191_IOCK_OEVS	0x10
+/* luminance output enable (outputs Y0-Y7) */
+#define SAA7191_IOCK_OEDY	0x08
+/* S-VHS bit (chrominance from CVBS or from chrominance input):
+ * 0=controlled by BYPS-bit, 1=from chrominance input */
+#define SAA7191_IOCK_CHRS	0x04
+/* general purpose switch 2
+ * VINO-specific: 0=used with CVBS, 1=used with S-Video */
+#define SAA7191_IOCK_GPSW2	0x02
+/* general purpose switch 1 */
+/* VINO-specific: 0=always, 1=not used!*/
+#define SAA7191_IOCK_GPSW1	0x01
+
+/* Miscellaneous Control #1 Register definitions */
+/* automatic field detection (50/60Hz standard) */
+#define SAA7191_CTL3_AUFD	0x80
+/* field select: (if AUFD=0)
+ * 0=50Hz (625 lines), 1=60Hz (525 lines) */
+#define SAA7191_CTL3_FSEL	0x40
+/* SECAM cross-colour reduction enable */
+#define SAA7191_CTL3_SXCR	0x20
+/* sync and clamping pulse enable (HCL and HSY outputs) */
+#define SAA7191_CTL3_SCEN	0x10
+/* output format: 0=4:1:1, 1=4:2:2 (4:2:2 for VINO) */
+#define SAA7191_CTL3_OFTS	0x08
+/* luminance delay compensation
+ * 0=0*2/LLC,  1=+1*2/LLC, 2=+2*2/LLC, 3=+3*2/LLC,
+ * 4=-4*2/LLC, 5=-3*2/LLC, 6=-2*2/LLC, 7=-1*2/LLC
+ * step size = 2/LLC = 67.8ns for 50Hz, 81.5ns for 60Hz */
+#define SAA7191_CTL3_YDEL_MASK	0x07
+#define SAA7191_CTL3_YDEL_SHIFT	0
+#define SAA7191_CTL3_YDEL2	0x04
+#define SAA7191_CTL3_YDEL1	0x02
+#define SAA7191_CTL3_YDEL0	0x01
+
+/* Miscellaneous Control #2 Register definitions */
+/* select HREF position
+ * 0=normal, HREF is matched to YUV output port,
+ * 1=HREF is matched to CVBS input port */
+#define SAA7191_CTL4_HRFS	0x04
+/* vertical noise reduction
+ * 0=normal, 1=searching window, 2=auto-deflection, 3=reduction bypassed */
+#define SAA7191_CTL4_VNOI_MASK	0x03
+#define SAA7191_CTL4_VNOI_SHIFT	0
+#define SAA7191_CTL4_VNOI_3	0x03
+#define SAA7191_CTL4_VNOI_2	0x02
+#define SAA7191_CTL4_VNOI_1	0x01
+#define SAA7191_CTL4_VNOI_0	0x00
+
+/* Chrominance Gain Control Register definitions
+ * - for QAM-modulated input signals, effects output amplitude
+ * (SECAM gain fixed)
+ * (nominal values for UV CCIR level) */
+#define SAA7191_CHCV_NTSC	0x2c
+#define SAA7191_CHCV_PAL	0x59
+
+/* Driver interface definitions */
+#define SAA7191_INPUT_COMPOSITE	0
+#define SAA7191_INPUT_SVIDEO	1
+
+#define SAA7191_NORM_PAL	1
+#define SAA7191_NORM_NTSC	2
+#define SAA7191_NORM_SECAM	3
+
+struct saa7191_status {
+	/* 0=no signal, 1=signal detected */
+	int signal;
+	/* 0=50hz (pal) signal, 1=60hz (ntsc) signal */
+	int signal_60hz;
+	/* 0=no color detected, 1=color detected */
+	int color;
+
+	/* current SAA7191_INPUT_ */
+	int input;
+	/* current SAA7191_NORM_ */
+	int norm;
+};
+
+#define SAA7191_BANDPASS_MIN		0x00
+#define SAA7191_BANDPASS_MAX		0x03
+#define SAA7191_BANDPASS_DEFAULT	0x00
+
+#define SAA7191_BANDPASS_WEIGHT_MIN	0x00
+#define SAA7191_BANDPASS_WEIGHT_MAX	0x03
+#define SAA7191_BANDPASS_WEIGHT_DEFAULT	0x01
+
+#define SAA7191_CORING_MIN		0x00
+#define SAA7191_CORING_MAX		0x03
+#define SAA7191_CORING_DEFAULT		0x00
+
+#define SAA7191_HUE_MIN			0x00
+#define SAA7191_HUE_MAX			0xff
+#define SAA7191_HUE_DEFAULT		0x80
+
+#define SAA7191_VTRC_MIN		0x00
+#define SAA7191_VTRC_MAX		0x01
+#define SAA7191_VTRC_DEFAULT		0x00
+
+#define SAA7191_FORCE_COLOUR_MIN	0x00
+#define SAA7191_FORCE_COLOUR_MAX	0x01
+#define SAA7191_FORCE_COLOUR_DEFAULT	0x00
+
+#define SAA7191_CHROMA_GAIN_MIN		0x00
+#define SAA7191_CHROMA_GAIN_MAX		0x03
+#define SAA7191_CHROMA_GAIN_DEFAULT	0x00
+
+#define SAA7191_LUMA_DELAY_MIN		-0x04
+#define SAA7191_LUMA_DELAY_MAX		0x03
+#define SAA7191_LUMA_DELAY_DEFAULT	0x01
+
+#define SAA7191_VNR_MIN			0x00
+#define SAA7191_VNR_MAX			0x03
+#define SAA7191_VNR_DEFAULT		0x00
+
+#define SAA7191_CONTROL_BANDPASS	(V4L2_CID_PRIVATE_BASE + 0)
+#define SAA7191_CONTROL_BANDPASS_WEIGHT	(V4L2_CID_PRIVATE_BASE + 1)
+#define SAA7191_CONTROL_CORING		(V4L2_CID_PRIVATE_BASE + 2)
+#define SAA7191_CONTROL_FORCE_COLOUR	(V4L2_CID_PRIVATE_BASE + 3)
+#define SAA7191_CONTROL_CHROMA_GAIN	(V4L2_CID_PRIVATE_BASE + 4)
+#define SAA7191_CONTROL_VTRC		(V4L2_CID_PRIVATE_BASE + 5)
+#define SAA7191_CONTROL_LUMA_DELAY	(V4L2_CID_PRIVATE_BASE + 6)
+#define SAA7191_CONTROL_VNR		(V4L2_CID_PRIVATE_BASE + 7)
+
+#define	DECODER_SAA7191_GET_STATUS	_IOR('d', 195, struct saa7191_status)
+#define	DECODER_SAA7191_SET_NORM	_IOW('d', 196, int)
+
+#endif