diff options
| author | Alexey Khoroshilov <khoroshilov@ispras.ru> | 2014-03-14 18:04:03 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <m.chehab@samsung.com> | 2014-03-24 17:23:09 -0300 |
| commit | df065b373f882c4efc396afa1f31cd8afedab356 (patch) | |
| tree | e1dbc84262106d69a67c41a9fcd2117e834eaefe /drivers/media/i2c | |
| parent | 320c63870941ef3bb6e08e979d894ad6d51340d7 (diff) | |
[media] adv7180: free an interrupt on failure paths in init_device()
There is request_irq() in init_device(), but the interrupt is not removed
on failure paths. The patch adds proper error handling.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Diffstat (limited to 'drivers/media/i2c')
| -rw-r--r-- | drivers/media/i2c/adv7180.c | 18 |
1 files changed, 11 insertions, 7 deletions
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c index 9cfc9a3ab3c..5e638b15945 100644 --- a/drivers/media/i2c/adv7180.c +++ b/drivers/media/i2c/adv7180.c @@ -561,40 +561,44 @@ static int init_device(struct i2c_client *client, struct adv7180_state *state) ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, ADV7180_ADI_CTRL_IRQ_SPACE); if (ret < 0) - return ret; + goto err; /* config the Interrupt pin to be active low */ ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI, ADV7180_ICONF1_ACTIVE_LOW | ADV7180_ICONF1_PSYNC_ONLY); if (ret < 0) - return ret; + goto err; ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0); if (ret < 0) - return ret; + goto err; ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0); if (ret < 0) - return ret; + goto err; /* enable AD change interrupts interrupts */ ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI, ADV7180_IRQ3_AD_CHANGE); if (ret < 0) - return ret; + goto err; ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0); if (ret < 0) - return ret; + goto err; ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG, 0); if (ret < 0) - return ret; + goto err; } return 0; + +err: + free_irq(state->irq, state); + return ret; } static int adv7180_probe(struct i2c_client *client, |