[media] rename most media/video pci drivers to media/pci

Rename all PCI drivers with their own directory under
drivers/media/video into drivers/media/pci and update the
building system.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 157 insertions, 0 deletions

diff --git a/drivers/media/pci/cx18/cx18-cards.h b/drivers/media/pci/cx18/cx18-cards.h
new file mode 100644
index 00000000000..add7391ecab
--- /dev/null
+++ b/drivers/media/pci/cx18/cx18-cards.h
@@ -0,0 +1,157 @@
+/*
+ *  cx18 functions to query card hardware
+ *
+ *  Derived from ivtv-cards.c
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@md.metrocast.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* hardware flags */
+#define CX18_HW_TUNER			(1 << 0)
+#define CX18_HW_TVEEPROM		(1 << 1)
+#define CX18_HW_CS5345			(1 << 2)
+#define CX18_HW_DVB			(1 << 3)
+#define CX18_HW_418_AV			(1 << 4)
+#define CX18_HW_GPIO_MUX		(1 << 5)
+#define CX18_HW_GPIO_RESET_CTRL		(1 << 6)
+#define CX18_HW_Z8F0811_IR_TX_HAUP	(1 << 7)
+#define CX18_HW_Z8F0811_IR_RX_HAUP	(1 << 8)
+#define CX18_HW_Z8F0811_IR_HAUP	(CX18_HW_Z8F0811_IR_RX_HAUP | \
+				 CX18_HW_Z8F0811_IR_TX_HAUP)
+
+#define CX18_HW_IR_ANY (CX18_HW_Z8F0811_IR_RX_HAUP | \
+			CX18_HW_Z8F0811_IR_TX_HAUP)
+
+/* video inputs */
+#define	CX18_CARD_INPUT_VID_TUNER	1
+#define	CX18_CARD_INPUT_SVIDEO1 	2
+#define	CX18_CARD_INPUT_SVIDEO2 	3
+#define	CX18_CARD_INPUT_COMPOSITE1 	4
+#define	CX18_CARD_INPUT_COMPOSITE2 	5
+#define	CX18_CARD_INPUT_COMPONENT1 	6
+
+/* audio inputs */
+#define	CX18_CARD_INPUT_AUD_TUNER	1
+#define	CX18_CARD_INPUT_LINE_IN1 	2
+#define	CX18_CARD_INPUT_LINE_IN2 	3
+
+#define CX18_CARD_MAX_VIDEO_INPUTS 6
+#define CX18_CARD_MAX_AUDIO_INPUTS 3
+#define CX18_CARD_MAX_TUNERS  	   2
+
+/* V4L2 capability aliases */
+#define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \
+			  V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | \
+			  V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE)
+
+struct cx18_card_video_input {
+	u8  video_type; 	/* video input type */
+	u8  audio_index;	/* index in cx18_card_audio_input array */
+	u32 video_input;	/* hardware video input */
+};
+
+struct cx18_card_audio_input {
+	u8  audio_type;		/* audio input type */
+	u32 audio_input;	/* hardware audio input */
+	u16 muxer_input;	/* hardware muxer input for boards with a
+				   multiplexer chip */
+};
+
+struct cx18_card_pci_info {
+	u16 device;
+	u16 subsystem_vendor;
+	u16 subsystem_device;
+};
+
+/* GPIO definitions */
+
+/* The mask is the set of bits used by the operation */
+
+struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */
+	u32 direction; 	/* DIR setting. Leave to 0 if no init is needed */
+	u32 initial_value;
+};
+
+struct cx18_gpio_i2c_slave_reset {
+	u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */
+	u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */
+	int msecs_asserted; /* time period reset must remain asserted */
+	int msecs_recovery; /* time after deassert for chips to be ready */
+	u32 ir_reset_mask;  /* GPIO to reset the Zilog Z8F0811 IR contoller */
+};
+
+struct cx18_gpio_audio_input { 	/* select tuner/line in input */
+	u32 mask; 		/* leave to 0 if not supported */
+	u32 tuner;
+	u32 linein;
+	u32 radio;
+};
+
+struct cx18_card_tuner {
+	v4l2_std_id std; 	/* standard for which the tuner is suitable */
+	int 	    tuner; 	/* tuner ID (from tuner.h) */
+};
+
+struct cx18_card_tuner_i2c {
+	unsigned short radio[2];/* radio tuner i2c address to probe */
+	unsigned short demod[3];/* demodulator i2c address to probe */
+	unsigned short tv[4];	/* tv tuner i2c addresses to probe */
+};
+
+struct cx18_ddr {		/* DDR config data */
+	u32 chip_config;
+	u32 refresh;
+	u32 timing1;
+	u32 timing2;
+	u32 tune_lane;
+	u32 initial_emrs;
+};
+
+/* for card information/parameters */
+struct cx18_card {
+	int type;
+	char *name;
+	char *comment;
+	u32 v4l2_capabilities;
+	u32 hw_audio_ctrl;	/* hardware used for the V4L2 controls (only
+				   1 dev allowed currently) */
+	u32 hw_muxer;		/* hardware used to multiplex audio input */
+	u32 hw_all;		/* all hardware used by the board */
+	struct cx18_card_video_input video_inputs[CX18_CARD_MAX_VIDEO_INPUTS];
+	struct cx18_card_audio_input audio_inputs[CX18_CARD_MAX_AUDIO_INPUTS];
+	struct cx18_card_audio_input radio_input;
+
+	/* GPIO card-specific settings */
+	u8 xceive_pin; 		/* XCeive tuner GPIO reset pin */
+	struct cx18_gpio_init 		 gpio_init;
+	struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset;
+	struct cx18_gpio_audio_input    gpio_audio_input;
+
+	struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS];
+	struct cx18_card_tuner_i2c *i2c;
+
+	struct cx18_ddr ddr;
+
+	/* list of device and subsystem vendor/devices that
+	   correspond to this card type. */
+	const struct cx18_card_pci_info *pci_list;
+};
+
+int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input);
+int cx18_get_audio_input(struct cx18 *cx, u16 index, struct v4l2_audio *input);
+const struct cx18_card *cx18_get_card(u16 index);