Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "The first part of the media updates for Kernel 3.7.

  This series contain:

   - A major tree renaming patch series: now, drivers are organized
     internally by their used bus, instead of by V4L2 and/or DVB API,
     providing a cleaner driver location for hybrid drivers that
     implement both APIs, and allowing to cleanup the Kconfig items and
     make them more intuitive for the end user;

   - Media Kernel developers are typically very lazy with their duties
     of keeping the MAINTAINERS entries for their drivers updated.  As
     now the tree is more organized, we're doing an effort to add/update
     those entries for the drivers that aren't currently orphan;

   - Several DVB USB drivers got moved to a new DVB USB v2 core; the new
     core fixes several bugs (as the existing one that got bitroted).
     Now, suspend/resume finally started to work fine (at least with
     some devices - we should expect more work with regards to it);

   - added multistream support for DVB-T2, and unified the API for
     DVB-S2 and ISDB-S.  Backward binary support is preserved;

   - as usual, a few new drivers, some V4L2 core improvements and lots
     of drivers improvements and fixes.

  There are some points to notice on this series:

   1) you should expect a trivial merge conflict on your tree, with the
      removal of Documentation/feature-removal-schedule.txt: this series
      would be adding two additional entries there.  I opted to not
      rebase it due to this recent change;

   2) With regards to the PCTV 520e udev-related breakage, I opted to
      fix it in a way that the patches can be backported to 3.5 even
      without your firmware fix patch.  This way, Greg doesn't need to
      rush backporting your patch (as there are still the firmware cache
      and firmware path customization issues to be addressed there).

      I'll send later a patch (likely after the end of the merge window)
      reverting the rest of the DRX-K async firmware request, fully
      restoring its original behaviour to allow media drivers to
      initialize everything serialized as before for 3.7 and upper.

   3) I'm planning to work on this weekend to test the DMABUF patches
      for V4L2.  The patches are on my queue for several Kernel cycles,
      but, up to now, there is/was no way to test the series locally.

      I have some concerns about this particular changeset with regards
      to security issues, and with regards to the replacement of the old
      VIDIOC_OVERLAY ioctl's that is broken on modern systems, due to
      GPU drivers change.  The Overlay API allows direct PCI2PCI
      transfers from a media capture card into the GPU framebuffer, but
      its API is crappy.  Also, the only existing X11 driver that
      implements it requires a XV extension that is not available
      anymore on modern drivers.  The DMABUF can do the same thing, but
      with it is promising to be a properly-designed API.  If I can
      successfully test this series and be happy with it, I should be
      asking you to pull them next week."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (717 commits)
  em28xx: regression fix: use DRX-K sync firmware requests on em28xx
  drxk: allow loading firmware synchrousnously
  em28xx: Make all em28xx extensions to be initialized asynchronously
  [media] tda18271: properly report read errors in tda18271_get_id
  [media] tda18271: delay IR & RF calibration until init() if delay_cal is set
  [media] MAINTAINERS: add Michael Krufky as tda827x maintainer
  [media] MAINTAINERS: add Michael Krufky as tda8290 maintainer
  [media] MAINTAINERS: add Michael Krufky as cxusb maintainer
  [media] MAINTAINERS: add Michael Krufky as lg2160 maintainer
  [media] MAINTAINERS: add Michael Krufky as lgdt3305 maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl111sf maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl5007t maintainer
  [media] MAINTAINERS: add Michael Krufky as tda18271 maintainer
  [media] s5p-tv: Report only multi-plane capabilities in vidioc_querycap
  [media] s5p-mfc: Fix misplaced return statement in s5p_mfc_suspend()
  [media] exynos-gsc: Add missing static storage class specifiers
  [media] exynos-gsc: Remove <linux/version.h> header file inclusion
  [media] s5p-fimc: Fix incorrect condition in fimc_lite_reqbufs()
  [media] s5p-tv: Fix potential NULL pointer dereference error
  [media] s5k6aa: Fix possible NULL pointer dereference
  ...

1 files changed, 773 insertions, 0 deletions

diff --git a/drivers/media/pci/saa7164/saa7164-cards.c b/drivers/media/pci/saa7164/saa7164-cards.c
new file mode 100644
index 00000000000..5b72da5ce41
--- /dev/null
+++ b/drivers/media/pci/saa7164/saa7164-cards.c
@@ -0,0 +1,773 @@
+/*
+ *  Driver for the NXP SAA7164 PCIe bridge
+ *
+ *  Copyright (c) 2010 Steven Toth <stoth@kernellabs.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include "saa7164.h"
+
+/* The Bridge API needs to understand register widths (in bytes) for the
+ * attached I2C devices, so we can simplify the virtual i2c mechansms
+ * and keep the -i2c.c implementation clean.
+ */
+#define REGLEN_8bit	1
+#define REGLEN_16bit	2
+
+struct saa7164_board saa7164_boards[] = {
+	[SAA7164_BOARD_UNKNOWN] = {
+		/* Bridge will not load any firmware, without knowing
+		 * the rev this would be fatal. */
+		.name		= "Unknown",
+	},
+	[SAA7164_BOARD_UNKNOWN_REV2] = {
+		/* Bridge will load the v2 f/w and dump descriptors */
+		/* Required during new board bringup */
+		.name		= "Generic Rev2",
+		.chiprev	= SAA7164_CHIP_REV2,
+	},
+	[SAA7164_BOARD_UNKNOWN_REV3] = {
+		/* Bridge will load the v2 f/w and dump descriptors */
+		/* Required during new board bringup */
+		.name		= "Generic Rev3",
+		.chiprev	= SAA7164_CHIP_REV3,
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x1d,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_2] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV2,
+		.unit		= {{
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_3] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV2,
+		.unit		= {{
+			.id		= 0x1d,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1c,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x1d,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1c,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x20,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x23,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250_2] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x28,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x26,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x29,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2250_3] = {
+		.name		= "Hauppauge WinTV-HVR2250",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x26,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x07,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x08,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-1 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (TOP)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x32 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "CX24228/S5H1411-2 (QAM)",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x34 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_5] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x23,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x21,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x22,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x25,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+};
+const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
+
+/* ------------------------------------------------------------------ */
+/* PCI subsystem IDs                                                  */
+
+struct saa7164_subid saa7164_subids[] = {
+	{
+		.subvendor = 0x0070,
+		.subdevice = 0x8880,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8810,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8980,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8900,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8901,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_3,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x88A1,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_3,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8891,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8851,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8940,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8953,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_5,
+	},
+};
+const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
+
+void saa7164_card_list(struct saa7164_dev *dev)
+{
+	int i;
+
+	if (0 == dev->pci->subsystem_vendor &&
+	    0 == dev->pci->subsystem_device) {
+		printk(KERN_ERR
+			"%s: Board has no valid PCIe Subsystem ID and can't\n"
+			"%s: be autodetected. Pass card=<n> insmod option to\n"
+			"%s: workaround that. Send complaints to the vendor\n"
+			"%s: of the TV card. Best regards,\n"
+			"%s:         -- tux\n",
+			dev->name, dev->name, dev->name, dev->name, dev->name);
+	} else {
+		printk(KERN_ERR
+			"%s: Your board isn't known (yet) to the driver.\n"
+			"%s: Try to pick one of the existing card configs via\n"
+			"%s: card=<n> insmod option.  Updating to the latest\n"
+			"%s: version might help as well.\n",
+			dev->name, dev->name, dev->name, dev->name);
+	}
+
+	printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod "
+		"option:\n", dev->name);
+
+	for (i = 0; i < saa7164_bcount; i++)
+		printk(KERN_ERR "%s:    card=%d -> %s\n",
+		       dev->name, i, saa7164_boards[i].name);
+}
+
+/* TODO: clean this define up into the -cards.c structs */
+#define PCIEBRIDGE_UNITID 2
+
+void saa7164_gpio_setup(struct saa7164_dev *dev)
+{
+	switch (dev->board) {
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
+		/*
+		GPIO 2: s5h1411 / tda10048-1 demod reset
+		GPIO 3: s5h1411 / tda10048-2 demod reset
+		GPIO 7: IRBlaster Zilog reset
+		 */
+
+		/* Reset parts by going in and out of reset */
+		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
+		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
+
+		msleep(20);
+
+		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
+		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
+		break;
+	}
+}
+
+static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data)
+{
+	struct tveeprom tv;
+
+	/* TODO: Assumption: eeprom on bus 0 */
+	tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv,
+		eeprom_data);
+
+	/* Make sure we support the board model */
+	switch (tv.model) {
+	case 88001:
+		/* Development board - Limit circulation */
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
+	case 88021:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */
+		break;
+	case 88041:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
+		break;
+	case 88061:
+		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, FM */
+		break;
+	case 89519:
+	case 89609:
+		/* WinTV-HVR2200 (PCIe, Retail, full-height)
+		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */
+		break;
+	case 89619:
+		/* WinTV-HVR2200 (PCIe, Retail, half-height)
+		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */
+		break;
+	default:
+		printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n",
+			dev->name, tv.model);
+		break;
+	}
+
+	printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name,
+		tv.model);
+}
+
+void saa7164_card_setup(struct saa7164_dev *dev)
+{
+	static u8 eeprom[256];
+
+	if (dev->i2c_bus[0].i2c_rc == 0) {
+		if (saa7164_api_read_eeprom(dev, &eeprom[0],
+			sizeof(eeprom)) < 0)
+			return;
+	}
+
+	switch (dev->board) {
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_5:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
+		hauppauge_eeprom(dev, &eeprom[0]);
+		break;
+	}
+}
+
+/* With most other drivers, the kernel expects to communicate with subdrivers
+ * through i2c. This bridge does not allow that, it does not expose any direct
+ * access to I2C. Instead we have to communicate through the device f/w for
+ * register access to 'processing units'. Each unit has a unique
+ * id, regardless of how the physical implementation occurs across
+ * the three physical i2c busses. The being said if we want leverge of
+ * the existing kernel drivers for tuners and demods we have to 'speak i2c',
+ * to this bridge implements 3 virtual i2c buses. This is a helper function
+ * for those.
+ *
+ * Description: Translate the kernels notion of an i2c address and bus into
+ * the appropriate unitid.
+ */
+int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr)
+{
+	/* For a given bus and i2c device address, return the saa7164 unique
+	 * unitid. < 0 on error */
+
+	struct saa7164_dev *dev = bus->dev;
+	struct saa7164_unit *unit;
+	int i;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+		if ((bus->nr == unit->i2c_bus_nr) &&
+			(addr == unit->i2c_bus_addr))
+			return unit->id;
+	}
+
+	return -1;
+}
+
+/* The 7164 API needs to know the i2c register length in advance.
+ * this is a helper function. Based on a specific chip addr and bus return the
+ * reg length.
+ */
+int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr)
+{
+	/* For a given bus and i2c device address, return the
+	 * saa7164 registry address width. < 0 on error
+	 */
+
+	struct saa7164_dev *dev = bus->dev;
+	struct saa7164_unit *unit;
+	int i;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+
+		if ((bus->nr == unit->i2c_bus_nr) &&
+			(addr == unit->i2c_bus_addr))
+			return unit->i2c_reg_len;
+	}
+
+	return -1;
+}
+/* TODO: implement a 'findeeprom' functio like the above and fix any other
+ * eeprom related todo's in -api.c.
+ */
+
+/* Translate a unitid into a x readable device name, for display purposes.  */
+char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid)
+{
+	char *undefed = "UNDEFINED";
+	char *bridge = "BRIDGE";
+	struct saa7164_unit *unit;
+	int i;
+
+	if (unitid == 0)
+		return bridge;
+
+	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
+		unit = &saa7164_boards[dev->board].unit[i];
+
+		if (unit->type == SAA7164_UNIT_UNDEFINED)
+			continue;
+
+		if (unitid == unit->id)
+				return unit->name;
+	}
+
+	return undefed;
+}
+