Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "The first part of the media updates for Kernel 3.7.

  This series contain:

   - A major tree renaming patch series: now, drivers are organized
     internally by their used bus, instead of by V4L2 and/or DVB API,
     providing a cleaner driver location for hybrid drivers that
     implement both APIs, and allowing to cleanup the Kconfig items and
     make them more intuitive for the end user;

   - Media Kernel developers are typically very lazy with their duties
     of keeping the MAINTAINERS entries for their drivers updated.  As
     now the tree is more organized, we're doing an effort to add/update
     those entries for the drivers that aren't currently orphan;

   - Several DVB USB drivers got moved to a new DVB USB v2 core; the new
     core fixes several bugs (as the existing one that got bitroted).
     Now, suspend/resume finally started to work fine (at least with
     some devices - we should expect more work with regards to it);

   - added multistream support for DVB-T2, and unified the API for
     DVB-S2 and ISDB-S.  Backward binary support is preserved;

   - as usual, a few new drivers, some V4L2 core improvements and lots
     of drivers improvements and fixes.

  There are some points to notice on this series:

   1) you should expect a trivial merge conflict on your tree, with the
      removal of Documentation/feature-removal-schedule.txt: this series
      would be adding two additional entries there.  I opted to not
      rebase it due to this recent change;

   2) With regards to the PCTV 520e udev-related breakage, I opted to
      fix it in a way that the patches can be backported to 3.5 even
      without your firmware fix patch.  This way, Greg doesn't need to
      rush backporting your patch (as there are still the firmware cache
      and firmware path customization issues to be addressed there).

      I'll send later a patch (likely after the end of the merge window)
      reverting the rest of the DRX-K async firmware request, fully
      restoring its original behaviour to allow media drivers to
      initialize everything serialized as before for 3.7 and upper.

   3) I'm planning to work on this weekend to test the DMABUF patches
      for V4L2.  The patches are on my queue for several Kernel cycles,
      but, up to now, there is/was no way to test the series locally.

      I have some concerns about this particular changeset with regards
      to security issues, and with regards to the replacement of the old
      VIDIOC_OVERLAY ioctl's that is broken on modern systems, due to
      GPU drivers change.  The Overlay API allows direct PCI2PCI
      transfers from a media capture card into the GPU framebuffer, but
      its API is crappy.  Also, the only existing X11 driver that
      implements it requires a XV extension that is not available
      anymore on modern drivers.  The DMABUF can do the same thing, but
      with it is promising to be a properly-designed API.  If I can
      successfully test this series and be happy with it, I should be
      asking you to pull them next week."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (717 commits)
  em28xx: regression fix: use DRX-K sync firmware requests on em28xx
  drxk: allow loading firmware synchrousnously
  em28xx: Make all em28xx extensions to be initialized asynchronously
  [media] tda18271: properly report read errors in tda18271_get_id
  [media] tda18271: delay IR & RF calibration until init() if delay_cal is set
  [media] MAINTAINERS: add Michael Krufky as tda827x maintainer
  [media] MAINTAINERS: add Michael Krufky as tda8290 maintainer
  [media] MAINTAINERS: add Michael Krufky as cxusb maintainer
  [media] MAINTAINERS: add Michael Krufky as lg2160 maintainer
  [media] MAINTAINERS: add Michael Krufky as lgdt3305 maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl111sf maintainer
  [media] MAINTAINERS: add Michael Krufky as mxl5007t maintainer
  [media] MAINTAINERS: add Michael Krufky as tda18271 maintainer
  [media] s5p-tv: Report only multi-plane capabilities in vidioc_querycap
  [media] s5p-mfc: Fix misplaced return statement in s5p_mfc_suspend()
  [media] exynos-gsc: Add missing static storage class specifiers
  [media] exynos-gsc: Remove <linux/version.h> header file inclusion
  [media] s5p-fimc: Fix incorrect condition in fimc_lite_reqbufs()
  [media] s5p-tv: Fix potential NULL pointer dereference error
  [media] s5k6aa: Fix possible NULL pointer dereference
  ...

1 files changed, 1370 insertions, 0 deletions

diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
new file mode 100644
index 00000000000..adabba8d28b
--- /dev/null
+++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c
@@ -0,0 +1,1370 @@
+/*
+ * Realtek RTL28xxU DVB USB driver
+ *
+ * Copyright (C) 2009 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
+ * Copyright (C) 2012 Thomas Mair <thomas.mair86@googlemail.com>
+ *
+ *    This program is free software; you can redistribute it and/or modify
+ *    it under the terms of the GNU General Public License as published by
+ *    the Free Software Foundation; either version 2 of the License, or
+ *    (at your option) any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License along
+ *    with this program; if not, write to the Free Software Foundation, Inc.,
+ *    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include "rtl28xxu.h"
+
+#include "rtl2830.h"
+#include "rtl2832.h"
+
+#include "qt1010.h"
+#include "mt2060.h"
+#include "mxl5005s.h"
+#include "fc0012.h"
+#include "fc0013.h"
+#include "e4000.h"
+#include "fc2580.h"
+#include "tua9001.h"
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+static int rtl28xxu_ctrl_msg(struct dvb_usb_device *d, struct rtl28xxu_req *req)
+{
+	int ret;
+	unsigned int pipe;
+	u8 requesttype;
+	u8 *buf;
+
+	buf = kmalloc(req->size, GFP_KERNEL);
+	if (!buf) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	if (req->index & CMD_WR_FLAG) {
+		/* write */
+		memcpy(buf, req->data, req->size);
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT);
+		pipe = usb_sndctrlpipe(d->udev, 0);
+	} else {
+		/* read */
+		requesttype = (USB_TYPE_VENDOR | USB_DIR_IN);
+		pipe = usb_rcvctrlpipe(d->udev, 0);
+	}
+
+	ret = usb_control_msg(d->udev, pipe, 0, requesttype, req->value,
+			req->index, buf, req->size, 1000);
+
+	dvb_usb_dbg_usb_control_msg(d->udev, 0, requesttype, req->value,
+			req->index, buf, req->size);
+
+	if (ret > 0)
+		ret = 0;
+
+	/* read request, copy returned data to return buf */
+	if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN))
+		memcpy(req->data, buf, req->size);
+
+	kfree(buf);
+
+	if (ret)
+		goto err;
+
+	return ret;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int rtl28xx_wr_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len)
+{
+	struct rtl28xxu_req req;
+
+	if (reg < 0x3000)
+		req.index = CMD_USB_WR;
+	else if (reg < 0x4000)
+		req.index = CMD_SYS_WR;
+	else
+		req.index = CMD_IR_WR;
+
+	req.value = reg;
+	req.size = len;
+	req.data = val;
+
+	return rtl28xxu_ctrl_msg(d, &req);
+}
+
+static int rtl2831_rd_regs(struct dvb_usb_device *d, u16 reg, u8 *val, int len)
+{
+	struct rtl28xxu_req req;
+
+	if (reg < 0x3000)
+		req.index = CMD_USB_RD;
+	else if (reg < 0x4000)
+		req.index = CMD_SYS_RD;
+	else
+		req.index = CMD_IR_RD;
+
+	req.value = reg;
+	req.size = len;
+	req.data = val;
+
+	return rtl28xxu_ctrl_msg(d, &req);
+}
+
+static int rtl28xx_wr_reg(struct dvb_usb_device *d, u16 reg, u8 val)
+{
+	return rtl28xx_wr_regs(d, reg, &val, 1);
+}
+
+static int rtl28xx_rd_reg(struct dvb_usb_device *d, u16 reg, u8 *val)
+{
+	return rtl2831_rd_regs(d, reg, val, 1);
+}
+
+static int rtl28xx_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val,
+		u8 mask)
+{
+	int ret;
+	u8 tmp;
+
+	/* no need for read if whole reg is written */
+	if (mask != 0xff) {
+		ret = rtl28xx_rd_reg(d, reg, &tmp);
+		if (ret)
+			return ret;
+
+		val &= mask;
+		tmp &= ~mask;
+		val |= tmp;
+	}
+
+	return rtl28xx_wr_reg(d, reg, val);
+}
+
+/* I2C */
+static int rtl28xxu_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+	int num)
+{
+	int ret;
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+	struct rtl28xxu_priv *priv = d->priv;
+	struct rtl28xxu_req req;
+
+	/*
+	 * It is not known which are real I2C bus xfer limits, but testing
+	 * with RTL2831U + MT2060 gives max RD 24 and max WR 22 bytes.
+	 * TODO: find out RTL2832U lens
+	 */
+
+	/*
+	 * I2C adapter logic looks rather complicated due to fact it handles
+	 * three different access methods. Those methods are;
+	 * 1) integrated demod access
+	 * 2) old I2C access
+	 * 3) new I2C access
+	 *
+	 * Used method is selected in order 1, 2, 3. Method 3 can handle all
+	 * requests but there is two reasons why not use it always;
+	 * 1) It is most expensive, usually two USB messages are needed
+	 * 2) At least RTL2831U does not support it
+	 *
+	 * Method 3 is needed in case of I2C write+read (typical register read)
+	 * where write is more than one byte.
+	 */
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+		return -EAGAIN;
+
+	if (num == 2 && !(msg[0].flags & I2C_M_RD) &&
+		(msg[1].flags & I2C_M_RD)) {
+		if (msg[0].len > 24 || msg[1].len > 24) {
+			/* TODO: check msg[0].len max */
+			ret = -EOPNOTSUPP;
+			goto err_mutex_unlock;
+		} else if (msg[0].addr == 0x10) {
+			/* method 1 - integrated demod */
+			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
+			req.index = CMD_DEMOD_RD | priv->page;
+			req.size = msg[1].len;
+			req.data = &msg[1].buf[0];
+			ret = rtl28xxu_ctrl_msg(d, &req);
+		} else if (msg[0].len < 2) {
+			/* method 2 - old I2C */
+			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
+			req.index = CMD_I2C_RD;
+			req.size = msg[1].len;
+			req.data = &msg[1].buf[0];
+			ret = rtl28xxu_ctrl_msg(d, &req);
+		} else {
+			/* method 3 - new I2C */
+			req.value = (msg[0].addr << 1);
+			req.index = CMD_I2C_DA_WR;
+			req.size = msg[0].len;
+			req.data = msg[0].buf;
+			ret = rtl28xxu_ctrl_msg(d, &req);
+			if (ret)
+				goto err_mutex_unlock;
+
+			req.value = (msg[0].addr << 1);
+			req.index = CMD_I2C_DA_RD;
+			req.size = msg[1].len;
+			req.data = msg[1].buf;
+			ret = rtl28xxu_ctrl_msg(d, &req);
+		}
+	} else if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
+		if (msg[0].len > 22) {
+			/* TODO: check msg[0].len max */
+			ret = -EOPNOTSUPP;
+			goto err_mutex_unlock;
+		} else if (msg[0].addr == 0x10) {
+			/* method 1 - integrated demod */
+			if (msg[0].buf[0] == 0x00) {
+				/* save demod page for later demod access */
+				priv->page = msg[0].buf[1];
+				ret = 0;
+			} else {
+				req.value = (msg[0].buf[0] << 8) |
+					(msg[0].addr << 1);
+				req.index = CMD_DEMOD_WR | priv->page;
+				req.size = msg[0].len-1;
+				req.data = &msg[0].buf[1];
+				ret = rtl28xxu_ctrl_msg(d, &req);
+			}
+		} else if (msg[0].len < 23) {
+			/* method 2 - old I2C */
+			req.value = (msg[0].buf[0] << 8) | (msg[0].addr << 1);
+			req.index = CMD_I2C_WR;
+			req.size = msg[0].len-1;
+			req.data = &msg[0].buf[1];
+			ret = rtl28xxu_ctrl_msg(d, &req);
+		} else {
+			/* method 3 - new I2C */
+			req.value = (msg[0].addr << 1);
+			req.index = CMD_I2C_DA_WR;
+			req.size = msg[0].len;
+			req.data = msg[0].buf;
+			ret = rtl28xxu_ctrl_msg(d, &req);
+		}
+	} else {
+		ret = -EINVAL;
+	}
+
+err_mutex_unlock:
+	mutex_unlock(&d->i2c_mutex);
+
+	return ret ? ret : num;
+}
+
+static u32 rtl28xxu_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm rtl28xxu_i2c_algo = {
+	.master_xfer   = rtl28xxu_i2c_xfer,
+	.functionality = rtl28xxu_i2c_func,
+};
+
+static int rtl2831u_read_config(struct dvb_usb_device *d)
+{
+	struct rtl28xxu_priv *priv = d_to_priv(d);
+	int ret;
+	u8 buf[1];
+	/* open RTL2831U/RTL2830 I2C gate */
+	struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x08"};
+	/* tuner probes */
+	struct rtl28xxu_req req_mt2060 = {0x00c0, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_qt1010 = {0x0fc4, CMD_I2C_RD, 1, buf};
+
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	/*
+	 * RTL2831U GPIOs
+	 * =========================================================
+	 * GPIO0 | tuner#0 | 0 off | 1 on  | MXL5005S (?)
+	 * GPIO2 | LED     | 0 off | 1 on  |
+	 * GPIO4 | tuner#1 | 0 on  | 1 off | MT2060
+	 */
+
+	/* GPIO direction */
+	ret = rtl28xx_wr_reg(d, SYS_GPIO_DIR, 0x0a);
+	if (ret)
+		goto err;
+
+	/* enable as output GPIO0, GPIO2, GPIO4 */
+	ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_EN, 0x15);
+	if (ret)
+		goto err;
+
+	/*
+	 * Probe used tuner. We need to know used tuner before demod attach
+	 * since there is some demod params needed to set according to tuner.
+	 */
+
+	/* demod needs some time to wake up */
+	msleep(20);
+
+	priv->tuner_name = "NONE";
+
+	/* open demod I2C gate */
+	ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
+	if (ret)
+		goto err;
+
+	/* check QT1010 ID(?) register; reg=0f val=2c */
+	ret = rtl28xxu_ctrl_msg(d, &req_qt1010);
+	if (ret == 0 && buf[0] == 0x2c) {
+		priv->tuner = TUNER_RTL2830_QT1010;
+		priv->tuner_name = "QT1010";
+		goto found;
+	}
+
+	/* open demod I2C gate */
+	ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
+	if (ret)
+		goto err;
+
+	/* check MT2060 ID register; reg=00 val=63 */
+	ret = rtl28xxu_ctrl_msg(d, &req_mt2060);
+	if (ret == 0 && buf[0] == 0x63) {
+		priv->tuner = TUNER_RTL2830_MT2060;
+		priv->tuner_name = "MT2060";
+		goto found;
+	}
+
+	/* assume MXL5005S */
+	priv->tuner = TUNER_RTL2830_MXL5005S;
+	priv->tuner_name = "MXL5005S";
+	goto found;
+
+found:
+	dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name);
+
+	return 0;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int rtl2832u_read_config(struct dvb_usb_device *d)
+{
+	struct rtl28xxu_priv *priv = d_to_priv(d);
+	int ret;
+	u8 buf[2];
+	/* open RTL2832U/RTL2832 I2C gate */
+	struct rtl28xxu_req req_gate_open = {0x0120, 0x0011, 0x0001, "\x18"};
+	/* close RTL2832U/RTL2832 I2C gate */
+	struct rtl28xxu_req req_gate_close = {0x0120, 0x0011, 0x0001, "\x10"};
+	/* tuner probes */
+	struct rtl28xxu_req req_fc0012 = {0x00c6, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_fc0013 = {0x00c6, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_mt2266 = {0x00c0, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_fc2580 = {0x01ac, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_mt2063 = {0x00c0, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_max3543 = {0x00c0, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_tua9001 = {0x7ec0, CMD_I2C_RD, 2, buf};
+	struct rtl28xxu_req req_mxl5007t = {0xd9c0, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_e4000 = {0x02c8, CMD_I2C_RD, 1, buf};
+	struct rtl28xxu_req req_tda18272 = {0x00c0, CMD_I2C_RD, 2, buf};
+
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	/* enable GPIO3 and GPIO6 as output */
+	ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x40);
+	if (ret)
+		goto err;
+
+	ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x48, 0x48);
+	if (ret)
+		goto err;
+
+	/*
+	 * Probe used tuner. We need to know used tuner before demod attach
+	 * since there is some demod params needed to set according to tuner.
+	 */
+
+	/* open demod I2C gate */
+	ret = rtl28xxu_ctrl_msg(d, &req_gate_open);
+	if (ret)
+		goto err;
+
+	priv->tuner_name = "NONE";
+
+	/* check FC0012 ID register; reg=00 val=a1 */
+	ret = rtl28xxu_ctrl_msg(d, &req_fc0012);
+	if (ret == 0 && buf[0] == 0xa1) {
+		priv->tuner = TUNER_RTL2832_FC0012;
+		priv->tuner_name = "FC0012";
+		goto found;
+	}
+
+	/* check FC0013 ID register; reg=00 val=a3 */
+	ret = rtl28xxu_ctrl_msg(d, &req_fc0013);
+	if (ret == 0 && buf[0] == 0xa3) {
+		priv->tuner = TUNER_RTL2832_FC0013;
+		priv->tuner_name = "FC0013";
+		goto found;
+	}
+
+	/* check MT2266 ID register; reg=00 val=85 */
+	ret = rtl28xxu_ctrl_msg(d, &req_mt2266);
+	if (ret == 0 && buf[0] == 0x85) {
+		priv->tuner = TUNER_RTL2832_MT2266;
+		priv->tuner_name = "MT2266";
+		goto found;
+	}
+
+	/* check FC2580 ID register; reg=01 val=56 */
+	ret = rtl28xxu_ctrl_msg(d, &req_fc2580);
+	if (ret == 0 && buf[0] == 0x56) {
+		priv->tuner = TUNER_RTL2832_FC2580;
+		priv->tuner_name = "FC2580";
+		goto found;
+	}
+
+	/* check MT2063 ID register; reg=00 val=9e || 9c */
+	ret = rtl28xxu_ctrl_msg(d, &req_mt2063);
+	if (ret == 0 && (buf[0] == 0x9e || buf[0] == 0x9c)) {
+		priv->tuner = TUNER_RTL2832_MT2063;
+		priv->tuner_name = "MT2063";
+		goto found;
+	}
+
+	/* check MAX3543 ID register; reg=00 val=38 */
+	ret = rtl28xxu_ctrl_msg(d, &req_max3543);
+	if (ret == 0 && buf[0] == 0x38) {
+		priv->tuner = TUNER_RTL2832_MAX3543;
+		priv->tuner_name = "MAX3543";
+		goto found;
+	}
+
+	/* check TUA9001 ID register; reg=7e val=2328 */
+	ret = rtl28xxu_ctrl_msg(d, &req_tua9001);
+	if (ret == 0 && buf[0] == 0x23 && buf[1] == 0x28) {
+		priv->tuner = TUNER_RTL2832_TUA9001;
+		priv->tuner_name = "TUA9001";
+		goto found;
+	}
+
+	/* check MXL5007R ID register; reg=d9 val=14 */
+	ret = rtl28xxu_ctrl_msg(d, &req_mxl5007t);
+	if (ret == 0 && buf[0] == 0x14) {
+		priv->tuner = TUNER_RTL2832_MXL5007T;
+		priv->tuner_name = "MXL5007T";
+		goto found;
+	}
+
+	/* check E4000 ID register; reg=02 val=40 */
+	ret = rtl28xxu_ctrl_msg(d, &req_e4000);
+	if (ret == 0 && buf[0] == 0x40) {
+		priv->tuner = TUNER_RTL2832_E4000;
+		priv->tuner_name = "E4000";
+		goto found;
+	}
+
+	/* check TDA18272 ID register; reg=00 val=c760  */
+	ret = rtl28xxu_ctrl_msg(d, &req_tda18272);
+	if (ret == 0 && (buf[0] == 0xc7 || buf[1] == 0x60)) {
+		priv->tuner = TUNER_RTL2832_TDA18272;
+		priv->tuner_name = "TDA18272";
+		goto found;
+	}
+
+found:
+	dev_dbg(&d->udev->dev, "%s: tuner=%s\n", __func__, priv->tuner_name);
+
+	/* close demod I2C gate */
+	ret = rtl28xxu_ctrl_msg(d, &req_gate_close);
+	if (ret < 0)
+		goto err;
+
+	return 0;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static struct rtl2830_config rtl28xxu_rtl2830_mt2060_config = {
+	.i2c_addr = 0x10, /* 0x20 */
+	.xtal = 28800000,
+	.ts_mode = 0,
+	.spec_inv = 1,
+	.vtop = 0x20,
+	.krf = 0x04,
+	.agc_targ_val = 0x2d,
+
+};
+
+static struct rtl2830_config rtl28xxu_rtl2830_qt1010_config = {
+	.i2c_addr = 0x10, /* 0x20 */
+	.xtal = 28800000,
+	.ts_mode = 0,
+	.spec_inv = 1,
+	.vtop = 0x20,
+	.krf = 0x04,
+	.agc_targ_val = 0x2d,
+};
+
+static struct rtl2830_config rtl28xxu_rtl2830_mxl5005s_config = {
+	.i2c_addr = 0x10, /* 0x20 */
+	.xtal = 28800000,
+	.ts_mode = 0,
+	.spec_inv = 0,
+	.vtop = 0x3f,
+	.krf = 0x04,
+	.agc_targ_val = 0x3e,
+};
+
+static int rtl2831u_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct rtl28xxu_priv *priv = d_to_priv(d);
+	struct rtl2830_config *rtl2830_config;
+	int ret;
+
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	switch (priv->tuner) {
+	case TUNER_RTL2830_QT1010:
+		rtl2830_config = &rtl28xxu_rtl2830_qt1010_config;
+		break;
+	case TUNER_RTL2830_MT2060:
+		rtl2830_config = &rtl28xxu_rtl2830_mt2060_config;
+		break;
+	case TUNER_RTL2830_MXL5005S:
+		rtl2830_config = &rtl28xxu_rtl2830_mxl5005s_config;
+		break;
+	default:
+		dev_err(&d->udev->dev, "%s: unknown tuner=%s\n",
+				KBUILD_MODNAME, priv->tuner_name);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* attach demodulator */
+	adap->fe[0] = dvb_attach(rtl2830_attach, rtl2830_config, &d->i2c_adap);
+	if (!adap->fe[0]) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	return 0;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static struct rtl2832_config rtl28xxu_rtl2832_fc0012_config = {
+	.i2c_addr = 0x10, /* 0x20 */
+	.xtal = 28800000,
+	.if_dvbt = 0,
+	.tuner = TUNER_RTL2832_FC0012
+};
+
+static struct rtl2832_config rtl28xxu_rtl2832_fc0013_config = {
+	.i2c_addr = 0x10, /* 0x20 */
+	.xtal = 28800000,
+	.if_dvbt = 0,
+	.tuner = TUNER_RTL2832_FC0013
+};
+
+static struct rtl2832_config rtl28xxu_rtl2832_tua9001_config = {
+	.i2c_addr = 0x10, /* 0x20 */
+	.xtal = 28800000,
+	.tuner = TUNER_RTL2832_TUA9001,
+};
+
+static struct rtl2832_config rtl28xxu_rtl2832_e4000_config = {
+	.i2c_addr = 0x10, /* 0x20 */
+	.xtal = 28800000,
+	.tuner = TUNER_RTL2832_E4000,
+};
+
+static int rtl2832u_fc0012_tuner_callback(struct dvb_usb_device *d,
+		int cmd, int arg)
+{
+	int ret;
+	u8 val;
+
+	dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg);
+
+	switch (cmd) {
+	case FC_FE_CALLBACK_VHF_ENABLE:
+		/* set output values */
+		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
+		if (ret)
+			goto err;
+
+		if (arg)
+			val &= 0xbf; /* set GPIO6 low */
+		else
+			val |= 0x40; /* set GPIO6 high */
+
+
+		ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
+		if (ret)
+			goto err;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err;
+	}
+	return 0;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int rtl2832u_tua9001_tuner_callback(struct dvb_usb_device *d,
+		int cmd, int arg)
+{
+	int ret;
+	u8 val;
+
+	dev_dbg(&d->udev->dev, "%s: cmd=%d arg=%d\n", __func__, cmd, arg);
+
+	/*
+	 * CEN     always enabled by hardware wiring
+	 * RESETN  GPIO4
+	 * RXEN    GPIO1
+	 */
+
+	switch (cmd) {
+	case TUA9001_CMD_RESETN:
+		if (arg)
+			val = (1 << 4);
+		else
+			val = (0 << 4);
+
+		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x10);
+		if (ret)
+			goto err;
+		break;
+	case TUA9001_CMD_RXEN:
+		if (arg)
+			val = (1 << 1);
+		else
+			val = (0 << 1);
+
+		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_VAL, val, 0x02);
+		if (ret)
+			goto err;
+		break;
+	}
+
+	return 0;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int rtl2832u_tuner_callback(struct dvb_usb_device *d, int cmd, int arg)
+{
+	struct rtl28xxu_priv *priv = d->priv;
+
+	switch (priv->tuner) {
+	case TUNER_RTL2832_FC0012:
+		return rtl2832u_fc0012_tuner_callback(d, cmd, arg);
+	case TUNER_RTL2832_TUA9001:
+		return rtl2832u_tua9001_tuner_callback(d, cmd, arg);
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int rtl2832u_frontend_callback(void *adapter_priv, int component,
+		int cmd, int arg)
+{
+	struct i2c_adapter *adap = adapter_priv;
+	struct dvb_usb_device *d = i2c_get_adapdata(adap);
+
+	dev_dbg(&d->udev->dev, "%s: component=%d cmd=%d arg=%d\n",
+			__func__, component, cmd, arg);
+
+	switch (component) {
+	case DVB_FRONTEND_COMPONENT_TUNER:
+		return rtl2832u_tuner_callback(d, cmd, arg);
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int rtl2832u_frontend_attach(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct rtl28xxu_priv *priv = d_to_priv(d);
+	struct rtl2832_config *rtl2832_config;
+
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	switch (priv->tuner) {
+	case TUNER_RTL2832_FC0012:
+		rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
+		break;
+	case TUNER_RTL2832_FC0013:
+		rtl2832_config = &rtl28xxu_rtl2832_fc0013_config;
+		break;
+	case TUNER_RTL2832_FC2580:
+		/* FIXME: do not abuse fc0012 settings */
+		rtl2832_config = &rtl28xxu_rtl2832_fc0012_config;
+		break;
+	case TUNER_RTL2832_TUA9001:
+		rtl2832_config = &rtl28xxu_rtl2832_tua9001_config;
+		break;
+	case TUNER_RTL2832_E4000:
+		rtl2832_config = &rtl28xxu_rtl2832_e4000_config;
+		break;
+	default:
+		dev_err(&d->udev->dev, "%s: unknown tuner=%s\n",
+				KBUILD_MODNAME, priv->tuner_name);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* attach demodulator */
+	adap->fe[0] = dvb_attach(rtl2832_attach, rtl2832_config, &d->i2c_adap);
+	if (!adap->fe[0]) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/* set fe callback */
+	adap->fe[0]->callback = rtl2832u_frontend_callback;
+
+	return 0;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static struct qt1010_config rtl28xxu_qt1010_config = {
+	.i2c_address = 0x62, /* 0xc4 */
+};
+
+static struct mt2060_config rtl28xxu_mt2060_config = {
+	.i2c_address = 0x60, /* 0xc0 */
+	.clock_out = 0,
+};
+
+static struct mxl5005s_config rtl28xxu_mxl5005s_config = {
+	.i2c_address     = 0x63, /* 0xc6 */
+	.if_freq         = IF_FREQ_4570000HZ,
+	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
+	.agc_mode        = MXL_SINGLE_AGC,
+	.tracking_filter = MXL_TF_C_H,
+	.rssi_enable     = MXL_RSSI_ENABLE,
+	.cap_select      = MXL_CAP_SEL_ENABLE,
+	.div_out         = MXL_DIV_OUT_4,
+	.clock_out       = MXL_CLOCK_OUT_DISABLE,
+	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+	.top		 = MXL5005S_TOP_25P2,
+	.mod_mode        = MXL_DIGITAL_MODE,
+	.if_mode         = MXL_ZERO_IF,
+	.AgcMasterByte   = 0x00,
+};
+
+static int rtl2831u_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct rtl28xxu_priv *priv = d_to_priv(d);
+	struct i2c_adapter *rtl2830_tuner_i2c;
+	struct dvb_frontend *fe;
+
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	/* use rtl2830 driver I2C adapter, for more info see rtl2830 driver */
+	rtl2830_tuner_i2c = rtl2830_get_tuner_i2c_adapter(adap->fe[0]);
+
+	switch (priv->tuner) {
+	case TUNER_RTL2830_QT1010:
+		fe = dvb_attach(qt1010_attach, adap->fe[0],
+				rtl2830_tuner_i2c, &rtl28xxu_qt1010_config);
+		break;
+	case TUNER_RTL2830_MT2060:
+		fe = dvb_attach(mt2060_attach, adap->fe[0],
+				rtl2830_tuner_i2c, &rtl28xxu_mt2060_config,
+				1220);
+		break;
+	case TUNER_RTL2830_MXL5005S:
+		fe = dvb_attach(mxl5005s_attach, adap->fe[0],
+				rtl2830_tuner_i2c, &rtl28xxu_mxl5005s_config);
+		break;
+	default:
+		fe = NULL;
+		dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
+				priv->tuner);
+	}
+
+	if (fe == NULL) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	return 0;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static const struct e4000_config rtl2832u_e4000_config = {
+	.i2c_addr = 0x64,
+	.clock = 28800000,
+};
+
+static const struct fc2580_config rtl2832u_fc2580_config = {
+	.i2c_addr = 0x56,
+	.clock = 16384000,
+};
+
+static struct tua9001_config rtl2832u_tua9001_config = {
+	.i2c_addr = 0x60,
+};
+
+static int rtl2832u_tuner_attach(struct dvb_usb_adapter *adap)
+{
+	int ret;
+	struct dvb_usb_device *d = adap_to_d(adap);
+	struct rtl28xxu_priv *priv = d_to_priv(d);
+	struct dvb_frontend *fe;
+
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	switch (priv->tuner) {
+	case TUNER_RTL2832_FC0012:
+		fe = dvb_attach(fc0012_attach, adap->fe[0],
+			&d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
+
+		/* since fc0012 includs reading the signal strength delegate
+		 * that to the tuner driver */
+		adap->fe[0]->ops.read_signal_strength =
+				adap->fe[0]->ops.tuner_ops.get_rf_strength;
+		return 0;
+		break;
+	case TUNER_RTL2832_FC0013:
+		fe = dvb_attach(fc0013_attach, adap->fe[0],
+			&d->i2c_adap, 0xc6>>1, 0, FC_XTAL_28_8_MHZ);
+
+		/* fc0013 also supports signal strength reading */
+		adap->fe[0]->ops.read_signal_strength =
+				adap->fe[0]->ops.tuner_ops.get_rf_strength;
+		return 0;
+	case TUNER_RTL2832_E4000:
+		fe = dvb_attach(e4000_attach, adap->fe[0], &d->i2c_adap,
+				&rtl2832u_e4000_config);
+		break;
+	case TUNER_RTL2832_FC2580:
+		fe = dvb_attach(fc2580_attach, adap->fe[0], &d->i2c_adap,
+				&rtl2832u_fc2580_config);
+		break;
+	case TUNER_RTL2832_TUA9001:
+		/* enable GPIO1 and GPIO4 as output */
+		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_DIR, 0x00, 0x12);
+		if (ret)
+			goto err;
+
+		ret = rtl28xx_wr_reg_mask(d, SYS_GPIO_OUT_EN, 0x12, 0x12);
+		if (ret)
+			goto err;
+
+		fe = dvb_attach(tua9001_attach, adap->fe[0], &d->i2c_adap,
+				&rtl2832u_tua9001_config);
+		break;
+	default:
+		fe = NULL;
+		dev_err(&d->udev->dev, "%s: unknown tuner=%d\n", KBUILD_MODNAME,
+				priv->tuner);
+	}
+
+	if (fe == NULL) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	return 0;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int rtl28xxu_init(struct dvb_usb_device *d)
+{
+	int ret;
+	u8 val;
+
+	dev_dbg(&d->udev->dev, "%s:\n", __func__);
+
+	/* init USB endpoints */
+	ret = rtl28xx_rd_reg(d, USB_SYSCTL_0, &val);
+	if (ret)
+		goto err;
+
+	/* enable DMA and Full Packet Mode*/
+	val |= 0x09;
+	ret = rtl28xx_wr_reg(d, USB_SYSCTL_0, val);
+	if (ret)
+		goto err;
+
+	/* set EPA maximum packet size to 0x0200 */
+	ret = rtl28xx_wr_regs(d, USB_EPA_MAXPKT, "\x00\x02\x00\x00", 4);
+	if (ret)
+		goto err;
+
+	/* change EPA FIFO length */
+	ret = rtl28xx_wr_regs(d, USB_EPA_FIFO_CFG, "\x14\x00\x00\x00", 4);
+	if (ret)
+		goto err;
+
+	return ret;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int rtl2831u_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	int ret;
+	u8 gpio, sys0, epa_ctl[2];
+
+	dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
+
+	/* demod adc */
+	ret = rtl28xx_rd_reg(d, SYS_SYS0, &sys0);
+	if (ret)
+		goto err;
+
+	/* tuner power, read GPIOs */
+	ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &gpio);
+	if (ret)
+		goto err;
+
+	dev_dbg(&d->udev->dev, "%s: RD SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
+			sys0, gpio);
+
+	if (onoff) {
+		gpio |= 0x01; /* GPIO0 = 1 */
+		gpio &= (~0x10); /* GPIO4 = 0 */
+		gpio |= 0x04; /* GPIO2 = 1, LED on */
+		sys0 = sys0 & 0x0f;
+		sys0 |= 0xe0;
+		epa_ctl[0] = 0x00; /* clear stall */
+		epa_ctl[1] = 0x00; /* clear reset */
+	} else {
+		gpio &= (~0x01); /* GPIO0 = 0 */
+		gpio |= 0x10; /* GPIO4 = 1 */
+		gpio &= (~0x04); /* GPIO2 = 1, LED off */
+		sys0 = sys0 & (~0xc0);
+		epa_ctl[0] = 0x10; /* set stall */
+		epa_ctl[1] = 0x02; /* set reset */
+	}
+
+	dev_dbg(&d->udev->dev, "%s: WR SYS0=%02x GPIO_OUT_VAL=%02x\n", __func__,
+			sys0, gpio);
+
+	/* demod adc */
+	ret = rtl28xx_wr_reg(d, SYS_SYS0, sys0);
+	if (ret)
+		goto err;
+
+	/* tuner power, write GPIOs */
+	ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, gpio);
+	if (ret)
+		goto err;
+
+	/* streaming EP: stall & reset */
+	ret = rtl28xx_wr_regs(d, USB_EPA_CTL, epa_ctl, 2);
+	if (ret)
+		goto err;
+
+	if (onoff)
+		usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));
+
+	return ret;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
+{
+	int ret;
+	u8 val;
+
+	dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff);
+
+	if (onoff) {
+		/* set output values */
+		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
+		if (ret)
+			goto err;
+
+		val |= 0x08;
+		val &= 0xef;
+
+		ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
+		if (ret)
+			goto err;
+
+		/* demod_ctl_1 */
+		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val);
+		if (ret)
+			goto err;
+
+		val &= 0xef;
+
+		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
+		if (ret)
+			goto err;
+
+		/* demod control */
+		/* PLL enable */
+		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
+		if (ret)
+			goto err;
+
+		/* bit 7 to 1 */
+		val |= 0x80;
+
+		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		if (ret)
+			goto err;
+
+		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
+		if (ret)
+			goto err;
+
+		val |= 0x20;
+
+		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		if (ret)
+			goto err;
+
+		mdelay(5);
+
+		/*enable ADC_Q and ADC_I */
+		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
+		if (ret)
+			goto err;
+
+		val |= 0x48;
+
+		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		if (ret)
+			goto err;
+
+		/* streaming EP: clear stall & reset */
+		ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x00\x00", 2);
+		if (ret)
+			goto err;
+
+		ret = usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x81));
+		if (ret)
+			goto err;
+	} else {
+		/* demod_ctl_1 */
+		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val);
+		if (ret)
+			goto err;
+
+		val |= 0x0c;
+
+		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
+		if (ret)
+			goto err;
+
+		/* set output values */
+		ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
+		if (ret)
+				goto err;
+
+		val |= 0x10;
+
+		ret = rtl28xx_wr_reg(d, SYS_GPIO_OUT_VAL, val);
+		if (ret)
+			goto err;
+
+		/* demod control */
+		ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL, &val);
+		if (ret)
+			goto err;
+
+		val &= 0x37;
+
+		ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL, val);
+		if (ret)
+			goto err;
+
+		/* streaming EP: set stall & reset */
+		ret = rtl28xx_wr_regs(d, USB_EPA_CTL, "\x10\x02", 2);
+		if (ret)
+			goto err;
+	}
+
+	return ret;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+
+static int rtl2831u_rc_query(struct dvb_usb_device *d)
+{
+	int ret, i;
+	struct rtl28xxu_priv *priv = d->priv;
+	u8 buf[5];
+	u32 rc_code;
+	struct rtl28xxu_reg_val rc_nec_tab[] = {
+		{ 0x3033, 0x80 },
+		{ 0x3020, 0x43 },
+		{ 0x3021, 0x16 },
+		{ 0x3022, 0x16 },
+		{ 0x3023, 0x5a },
+		{ 0x3024, 0x2d },
+		{ 0x3025, 0x16 },
+		{ 0x3026, 0x01 },
+		{ 0x3028, 0xb0 },
+		{ 0x3029, 0x04 },
+		{ 0x302c, 0x88 },
+		{ 0x302e, 0x13 },
+		{ 0x3030, 0xdf },
+		{ 0x3031, 0x05 },
+	};
+
+	/* init remote controller */
+	if (!priv->rc_active) {
+		for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) {
+			ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg,
+					rc_nec_tab[i].val);
+			if (ret)
+				goto err;
+		}
+		priv->rc_active = true;
+	}
+
+	ret = rtl2831_rd_regs(d, SYS_IRRC_RP, buf, 5);
+	if (ret)
+		goto err;
+
+	if (buf[4] & 0x01) {
+		if (buf[2] == (u8) ~buf[3]) {
+			if (buf[0] == (u8) ~buf[1]) {
+				/* NEC standard (16 bit) */
+				rc_code = buf[0] << 8 | buf[2];
+			} else {
+				/* NEC extended (24 bit) */
+				rc_code = buf[0] << 16 |
+						buf[1] << 8 | buf[2];
+			}
+		} else {
+			/* NEC full (32 bit) */
+			rc_code = buf[0] << 24 | buf[1] << 16 |
+					buf[2] << 8 | buf[3];
+		}
+
+		rc_keydown(d->rc_dev, rc_code, 0);
+
+		ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1);
+		if (ret)
+			goto err;
+
+		/* repeated intentionally to avoid extra keypress */
+		ret = rtl28xx_wr_reg(d, SYS_IRRC_SR, 1);
+		if (ret)
+			goto err;
+	}
+
+	return ret;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
+		struct dvb_usb_rc *rc)
+{
+	rc->map_name = RC_MAP_EMPTY;
+	rc->allowed_protos = RC_TYPE_NEC;
+	rc->query = rtl2831u_rc_query;
+	rc->interval = 400;
+
+	return 0;
+}
+
+static int rtl2832u_rc_query(struct dvb_usb_device *d)
+{
+	int ret, i;
+	struct rtl28xxu_priv *priv = d->priv;
+	u8 buf[128];
+	int len;
+	struct rtl28xxu_reg_val rc_nec_tab[] = {
+		{ IR_RX_CTRL,             0x20 },
+		{ IR_RX_BUF_CTRL,         0x80 },
+		{ IR_RX_IF,               0xff },
+		{ IR_RX_IE,               0xff },
+		{ IR_MAX_DURATION0,       0xd0 },
+		{ IR_MAX_DURATION1,       0x07 },
+		{ IR_IDLE_LEN0,           0xc0 },
+		{ IR_IDLE_LEN1,           0x00 },
+		{ IR_GLITCH_LEN,          0x03 },
+		{ IR_RX_CLK,              0x09 },
+		{ IR_RX_CFG,              0x1c },
+		{ IR_MAX_H_TOL_LEN,       0x1e },
+		{ IR_MAX_L_TOL_LEN,       0x1e },
+		{ IR_RX_CTRL,             0x80 },
+	};
+
+	/* init remote controller */
+	if (!priv->rc_active) {
+		for (i = 0; i < ARRAY_SIZE(rc_nec_tab); i++) {
+			ret = rtl28xx_wr_reg(d, rc_nec_tab[i].reg,
+					rc_nec_tab[i].val);
+			if (ret)
+				goto err;
+		}
+		priv->rc_active = true;
+	}
+
+	ret = rtl28xx_rd_reg(d, IR_RX_IF, &buf[0]);
+	if (ret)
+		goto err;
+
+	if (buf[0] != 0x83)
+		goto exit;
+
+	ret = rtl28xx_rd_reg(d, IR_RX_BC, &buf[0]);
+	if (ret)
+		goto err;
+
+	len = buf[0];
+	ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len);
+
+	/* TODO: pass raw IR to Kernel IR decoder */
+
+	ret = rtl28xx_wr_reg(d, IR_RX_IF, 0x03);
+	ret = rtl28xx_wr_reg(d, IR_RX_BUF_CTRL, 0x80);
+	ret = rtl28xx_wr_reg(d, IR_RX_CTRL, 0x80);
+
+exit:
+	return ret;
+err:
+	dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+	return ret;
+}
+
+static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
+		struct dvb_usb_rc *rc)
+{
+	rc->map_name = RC_MAP_EMPTY;
+	rc->allowed_protos = RC_TYPE_NEC;
+	rc->query = rtl2832u_rc_query;
+	rc->interval = 400;
+
+	return 0;
+}
+
+static const struct dvb_usb_device_properties rtl2831u_props = {
+	.driver_name = KBUILD_MODNAME,
+	.owner = THIS_MODULE,
+	.adapter_nr = adapter_nr,
+	.size_of_priv = sizeof(struct rtl28xxu_priv),
+
+	.power_ctrl = rtl2831u_power_ctrl,
+	.i2c_algo = &rtl28xxu_i2c_algo,
+	.read_config = rtl2831u_read_config,
+	.frontend_attach = rtl2831u_frontend_attach,
+	.tuner_attach = rtl2831u_tuner_attach,
+	.init = rtl28xxu_init,
+	.get_rc_config = rtl2831u_get_rc_config,
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
+		},
+	},
+};
+
+static const struct dvb_usb_device_properties rtl2832u_props = {
+	.driver_name = KBUILD_MODNAME,
+	.owner = THIS_MODULE,
+	.adapter_nr = adapter_nr,
+	.size_of_priv = sizeof(struct rtl28xxu_priv),
+
+	.power_ctrl = rtl2832u_power_ctrl,
+	.i2c_algo = &rtl28xxu_i2c_algo,
+	.read_config = rtl2832u_read_config,
+	.frontend_attach = rtl2832u_frontend_attach,
+	.tuner_attach = rtl2832u_tuner_attach,
+	.init = rtl28xxu_init,
+	.get_rc_config = rtl2832u_get_rc_config,
+
+	.num_adapters = 1,
+	.adapter = {
+		{
+			.stream = DVB_USB_STREAM_BULK(0x81, 6, 8 * 512),
+		},
+	},
+};
+
+static const struct usb_device_id rtl28xxu_id_table[] = {
+	{ DVB_USB_DEVICE(USB_VID_REALTEK, USB_PID_REALTEK_RTL2831U,
+		&rtl2831u_props, "Realtek RTL2831U reference design", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT,
+		&rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_FREECOM_DVBT_2,
+		&rtl2831u_props, "Freecom USB2.0 DVB-T", NULL) },
+
+	{ DVB_USB_DEVICE(USB_VID_REALTEK, 0x2832,
+		&rtl2832u_props, "Realtek RTL2832U reference design", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_REALTEK, 0x2838,
+		&rtl2832u_props, "Realtek RTL2832U reference design", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1,
+		&rtl2832u_props, "Terratec Cinergy T Stick Black", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_DELOCK_USB2_DVBT,
+		&rtl2832u_props, "G-Tek Electronics Group Lifeview LV5TDLX DVB-T", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_NOXON_DAB_STICK,
+		&rtl2832u_props, "NOXON DAB/DAB+ USB dongle", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TREKSTOR_TERRES_2_0,
+		&rtl2832u_props, "Trekstor DVB-T Stick Terres 2.0", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1101,
+		&rtl2832u_props, "Dexatek DK DVB-T Dongle", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6680,
+		&rtl2832u_props, "DigitalNow Quad DVB-T Receiver", NULL) },
+	{ DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d3,
+		&rtl2832u_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) },
+	{ }
+};
+MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table);
+
+static struct usb_driver rtl28xxu_usb_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = rtl28xxu_id_table,
+	.probe = dvb_usbv2_probe,
+	.disconnect = dvb_usbv2_disconnect,
+	.suspend = dvb_usbv2_suspend,
+	.resume = dvb_usbv2_resume,
+	.reset_resume = dvb_usbv2_reset_resume,
+	.no_dynamic_id = 1,
+	.soft_unbind = 1,
+};
+
+module_usb_driver(rtl28xxu_usb_driver);
+
+MODULE_DESCRIPTION("Realtek RTL28xxU DVB USB driver");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_AUTHOR("Thomas Mair <thomas.mair86@googlemail.com>");
+MODULE_LICENSE("GPL");